Cumincad : CUMINCAD Papers : Search Results

CumInCAD is a Cumulative Index about publications in Computer Aided Architectural Design
supported by the sibling associations ACADIA, CAADRIA, eCAADe, SIGraDi, ASCAAD and CAAD futures

PDF papers
References

Hits 1 to 20 of 603

Reformat results as: short short into frame detailed detailed into frame

_id	diss_2003
id	diss_2003
authors	Gorczyca, Adam
year	2003
title	Interaction of the design methods and the contemporary computer techniques
source	Faculty of Architecture, Warsaw University of Technology
summary	The thesis researches a bilateral relations between computer techniques and methods of architectural design. It represents a holistic attitude because of a multithread analysis in the field of the theory of design, a new hard- and software used by architects, and a design practice. Thesis: Contemporary computer science development at the end of the twentieth century pushed architects to use hard- and software as tools, which became an active support (more than just CAAD). It enabled to widen the scope of a form-properties research and a generation of solutions impossible to achieve before, by using traditional methods and tools. This situation leads to new, unpredictable possibilities of architectural research and design. Objectives: 1. Definition of the latest trends in computer technologies applied in architectural offices. 2. Presentation of some practical consequencies of application of those technologies in design and construction. 3. Separation of new design methods caused by use of digital tools. 4. A simplified taxonomy of the methods above, with characteristic features. 5. A research in practical application of digital tools in Polish and foreign offices, as well as at the WUT Faculty of Architecture. The subject of the work: The thesis constitutes of five chapters. The first chapter is an introduction, where the range of work is presented in the context of place, time and the research made. The following chapters research three aspects of CAAD: (1) hardware and software, (2) new definition of architecture, which is a result of application of the digital tools, (3) practical problems connected with the use of computer techniques. The second chapter describes the new technologies in use –Virtual Reality (incl. VRD, CAVE’s, Data Gloves, motion-capture), Rapid prototyping (incl. holographic printers, 3D scanners, routers, milling-machines), new types of interfaces (e.g. xWorlds, InfoSpace, Flock of birds), etc. The third chapter is a theoretical one. It presents three types of changes in design methods, which can be classified, judging by results, in architecture of: (a) in-formation (b) de-formation and (c) cyberspace. All the mentioned applications of a digital technology cause redefinition of the range of the architects’ profession. The fourth chapter is concentrated on the application and utilization of technology. It is a detailed analysis of chosen buildings (characteristic examples) and design methods used by some avant-garde and well-known practitioners and visioners of architecture (Eisenman, Gehry, Spuybroek, etc.). It also presents statistics, where the influence of digital tools on the way of working (efficiency, productivity, use of tools) is expressed numerically. A synthesis summarizes the relation between architects and the new digital tools in some aspects: hard- and software, social changes, ergonomics, methodics, linguistic/symbolic and architectural. The mentioned ranges of interaction constitute the proof of the thesis.
series	thesis:PhD
email
last changed	2003/09/17 18:20

_id	sigradi2003_131
id	sigradi2003_131
authors	Senagala, Mahesh
year	2003
title	Post-spatial Architectures: The Emergence of Time-like Parametric Worlds
source	SIGraDi 2003 - [Proceedings of the 7th Iberoamerican Congress of Digital Graphics] Rosario Argentina 5-7 november 2003
summary	A new trend is emerging in architecture today: dynamic and time-like architectures (a term derived from the language of Theory of Relativity) that are capable of moving, flexing and reconfiguring themselves through globally networked control mechanisms are emerging. Such buildings maybe "plugged into" the information networks and can be manipulated through remote interaction. Architecture can be published, literally. At this time there is no single theoretical framework available to address such architectural efforts and the paper is aimed at providing a framework under the rubric of "Time-like Architectures". The paper addresses the unprecedented transformation of the spatial and temporal foundations of architecture by a convergence of two technological developments: global real-time information networks and kinetic, pneumatic tectonics. Envisioned and in some cases built by a group of avant-garde architects, time-like architectures are poised to become a norm in a not too distant future. The paper will identify, define and outline few time-like works. The paper will also outline the historical, theoretical and ethical relationships between post-spatial (author's term), post-modern and modern architectures using Charles Jencks' structuralist classification, The Evolutionary Tree.
keywords	Contemporary architecture, digital networks, theory
series	SIGRADI
email
last changed	2016/03/10 10:00

_id	ecaade03_433_208_froehlich
id	ecaade03_433_208_froehlich
authors	Fröhlich, C., Hirschberg, U., Frühwirth, M. and Wondra, W.
year	2003
title	no_LAb__in_feld - Is common- ground a word or just a sound? (Lou Reed, 1989)
doi	https://doi.org/10.52842/conf.ecaade.2003.433
source	Digital Design [21th eCAADe Conference Proceedings / ISBN 0-9541183-1-6] Graz (Austria) 17-20 September 2003, pp. 433-436
summary	This paper describes the concept and the current state of development of a new laboratory for digital experimentation in architectural education and research. The novel forms of collaboration and learning for which it is intended and the quick pace of innovation in digital technology on which it depends both require an appropriately flexible spatial and technological framework. And it requires a particular mindset. The no_LAb__in_feld is not just another laboratory. It is a place, a community, a high-tech construction site, a permanent work in progress. It is the prototype of a next generation design studio.
keywords	Design studio education: creative collaboration; digital playground; hybridinteractive installations; augmented reality
series	eCAADe
email
more	http://ikg.tugraz.at/
last changed	2022/06/07 07:50

_id	acadia03_012
id	acadia03_012
authors	Seebohm, Thomas and Temkin, Aron
year	2003
title	CONNECTED COURSES: METHODS OF NETWORK COMMUNICATIONS
doi	https://doi.org/10.52842/conf.acadia.2003.094
source	Connecting >> Crossroads of Digital Discourse [Proceedings of the 2003 Annual Conference of the Association for Computer Aided Design In Architecture / ISBN 1-880250-12-8] Indianapolis (Indiana) 24-27 October 2003, pp. 94-98
summary	Where are we now?In the recent NJIT survey of digital media in the design schools twenty-eight out of twenty-nine architecture schools reported to have networked design studios (NJIT, 2003). This would seem to indicate a ubiquity of digital media tools. While the use of these tools is still often limited to design presentation (computer aided drawing and modeling) rather than design generation, the studio is historically a place of discovery and experimentation: with computers so available in this fertile environment we are poised to evolve the medium forward towards improved design development. This evolution is initially apparent in the way presentation methods and presentation processes are shifting. Not only are students becoming increasingly digital in their approach to design, but methods of working and presentation are also changing.
series	ACADIA
type	normal paper
email
last changed	2022/06/07 07:56

_id	ecaade03_260_02_nardi
id	ecaade03_260_02_nardi
authors	Nardini, Marco
year	2003
title	Avant-garde techniques in contemporary design - New tools or new languages for the project?
doi	https://doi.org/10.52842/conf.ecaade.2003.261
source	Digital Design [21th eCAADe Conference Proceedings / ISBN 0-9541183-1-6] Graz (Austria) 17-20 September 2003, pp. 261-264
summary	In this paper it is argued that new digital techniques join together several skills; from CAD (Computer Aided Design), to CAE (Computer Aided Engineering), till CAM (Computer Aided Manufacturing). That assemblage of methods involves a change in the way to achieve a project. The idea comes out as result of connected actions within software-hardware tools. According to this analysis the implementation of gradients (e.g. movement, time, direction) have a significant role in shaping a multi-disciplinary approach to design; supported by simulation as way to verify and control solutions. Such innovations can settle a new way to design, in terms of vocabulary, grammar and syntax? How can we develop useful tools to express the ""new visible"" of avant-garde techniques?
keywords	Avant-garde techniques, simulation, complexity, new visible, immaterial,parametric design
series	eCAADe
email
more	http://ecologo.3go.it
last changed	2022/06/07 07:58

_id	avocaad_2003_09
id	avocaad_2003_09
authors	Alexander Asanowicz
year	2003
title	Form Follows Media - Experiences of Bialystok School of Architectural Composition
source	LOCAL VALUES in a NETWORKED DESIGN WORLD - ADDED VALUE OF COMPUTER AIDED ARCHITECTURAL DESIGN, Stellingwerff, Martijn and Verbeke, Johan (Eds.), (2004) DUP Science - Delft University Press, ISBN 90-407-2507-1.
summary	This paper considers transition from physical modelling to digital methods of the creation of architectural forms. Every type of creation has constructed the proper means of expression and its own methodology. The main thesis of this paper is that a specific character of the composition activity of an architect is determined by the modelling methods. As the research on architectural modelling, the two methods of creating spatial architectural forms (cardboard model and computer model) have been compared. Research has been done on the basis of the same exercise for both media. The process of creation proceeded in the same way, too. As the start point students have found the inspiration. Each student presented photos of existing architectural objects and a text, which explained the reasons of the choice. Next steps were sketches of the idea and realisation of the model. The achieved results of creative activity fully confirm the thesis of the research.
keywords	Architecture, Local values, Globalisation, Computer Aided Architectural Design
series	AVOCAAD
email
last changed	2006/01/16 21:38

_id	cf2003_m_079
id	cf2003_m_079
authors	PETRIC, J., CONTI, G. and UCELLI, G.
year	2003
title	Designing within Virtual Worlds
source	Digital Design - Research and Practice [Proceedings of the 10th International Conference on Computer Aided Architectural Design Futures / ISBN 1-4020-1210-1] Tainan (Taiwan) 13–15 October 2003, pp. 213-224
summary	This paper celebrates the successful outcome of a trial of an innovative multi-platform distributed design decision support system in which the shared design environment exists within the virtual world. The outcome is the result of a sustained three-year research and development effort, within an internationally recognised research group. The project set itself a number of ambitious targets within the broad spectrum of distributed design decision support, viz: • A multi-platform environment: the trial demonstrates inter-operability of different machine platforms - from a home PC to an international standard Virtual Reality Centre. • A distributed environment: the trial demonstrates the high level of understanding amongst the design team separated by time and space. • An ability to propose, discuss and agree upon, design decision from within the virtual world. Hitherto, virtual environments were viewing galleries; designers had to leave them to effect design changes in a conventional CAD package. The trial described in the paper amply demonstrates the potential to design, collaboratively and, in distributed mode, from within the virtual world. The two ideas upon which the system (known as JCAD-VR) is built are: • That all the users present in the virtual world have to be able to share the same virtual environment in a "transparent fashion"; • The user interface, instead of the traditional menu/windows based layout, is part of the virtual world itself. Any element of the interface becomes an object belonging to the 3D world and therefore it is treated as any other object. Each element of the interface can then be moved or scaled according to the user’s needs. The entire project is based on client-server architecture where every user logs into a virtual world and starts sharing design tasks with other users. The authors propose to present a video which demonstrates the positive outcome of the trials to date. More importantly, perhaps, the authors will put the achievements of the R+D into the context of past aspirations and developments in the subject area and, most importantly of all, suggest how these modest achievements will impact on the next decade of increasingly rapid R+D.
keywords	collaboration, distributed design, interface, virtual environment
series	CAAD Futures
email
last changed	2003/09/22 12:21

_id	caadria2003_b7-2
id	caadria2003_b7-2
authors	Schank-Smith, Kendra
year	2003
title	Festina Lente and the Digital World
doi	https://doi.org/10.52842/conf.caadria.2003.951
source	CAADRIA 2003 [Proceedings of the 8th International Conference on Computer Aided Architectural Design Research in Asia / ISBN 974-9584-13-9] Bangkok Thailand 18-20 October 2003, pp. 951-962
summary	In this paper, I would like to explore a comparison of the issues of quickness and festina lente as metaphoric or analogous for the computer and its use. Computers in the twenty first century are a vital part of architecture whether used for conception or realization. We as architects and educators must cont inually question their use in the design process and their appropriateness for visualization. We can know and understand more about the role of computers in our discipline, by seeing them in relation to ideas of quickness and festina lente. Italo Calvino in Six Memos for the Next Millennium defines quickness as having several qualities, the most important being economy of expression, time as relative, swift reasoning and consciousness. This involves quickness as being both 'intelligent and witty,' a matter of physical speed versus speed of the mind. The dichotomy of swiftness and slowness may help us question how these two elements are not necessarily adverse but rather by being understood together, they may help us better appreciate the strengths of the computer in architecture.
series	CAADRIA
email
last changed	2022/06/07 07:57

_id	ijac20031401
id	ijac20031401
authors	Seichter, Hartmut
year	2003
title	Augmented Reality Aided Design
source	International Journal of Architectural Computing vol. 1 - no. 4
summary	Ten years after Nielsen wrote about the "next generation interface" [1] we are still largely confined to WIMP [2] interfaces in design computing. A big question that lies ahead is 'Does the integration of computing technology through Augmented Reality help the formal design investigation process?' There are several suggestions that the conventional desktop metaphors are counter-intuitive for understanding spatial relationships [1, 3, 4]. Main concern is the mismatch in mapping of presentation and interface. Looking at other research areas, one can see that the application of Augmented Environments (AE) can enhance the speed of decision making [5] or creates better understanding of complex spatial arrangements [6] due to the fact that information is displayed where it occurs. Obviously, the representation and interaction is crucial for perceptive performance in design sketching as it is in AEs. This article will discuss a software prototype called sketchand+ and the implications of Augmented Reality for digital design.
series	journal
email
more	http://www.multi-science.co.uk/ijac.htm
last changed	2007/03/04 07:08

_id	sigradi2003_093
id	sigradi2003_093
authors	Banchini, Guillermo andMoliné, Aníbal
year	2003
title	Seminario: Exploración de Enfoques y Técnicas Digitales aplicadas al Proyecto (Seminar: Exploration de Digital Aproaches and Techniques applied to the Project)
source	SIGraDi 2003 - [Proceedings of the 7th Iberoamerican Congress of Digital Graphics] Rosario Argentina 5-7 november 2003
summary	This paper explains the experience performed by a group of architecture students during a short term worksop, trying to explore the potentials of new approaches and digital technics applied to urban and architectural design. The main purposes were: the inclusion of objetive information and quantitative data of material significance in order to assist the generation and structuring of the design process. The notions of "diagram", "field conditions", "contextual logistic" and "animation" were the conceptual categories employed to approach the dinamic conditions and time related logics as critical aspects of the flexibility associated with material organizations.
keywords	Projects, approaches, explorations, digital, technics.
series	SIGRADI
email
last changed	2016/03/10 09:47

_id	sigradi2008_049
id	sigradi2008_049
authors	Benamy, Turkienicz ; Beck Mateus, Mayer Rosirene
year	2008
title	Computing And Manipulation In Design - A Pedagogical Experience Using Symmetry
source	SIGraDi 2008 - [Proceedings of the 12th Iberoamerican Congress of Digital Graphics] La Habana - Cuba 1-5 December 2008
summary	The concept of symmetry has been usually restricted to bilateral symmetry, though in an extended sense it refers to any isometric transformation that maintains a certain shape invariant. Groups of operations such as translation, rotation, reflection and combinations of these originate patterns classified by modern mathematics as point groups, friezes and wallpapers (March and Steadman, 1974). This extended notion represents a tool for the recognition and reproduction of patterns, a primal aspect of the perception, comprehension and description of everything that we see. Another aspect of this process is the perception of shapes, primary and emergent. Primary shapes are the ones explicitly represented and emergent shapes are the ones implicit in the others (Gero and Yan, 1994). Some groups of shapes known as Semantic Shapes are especially meaningful in architecture, expressing visual features so as symmetry, rhythm, movement and balance. The extended understanding of the concept of symmetry might improve the development of cognitive abilities concerning the creation, recognition and meaning of forms and shapes, aspects of visual reasoning involved in the design process. This paper discusses the development of a pedagogical experience concerned with the application of the concept of symmetry in the creative generation of forms using computational tools and manipulation. The experience has been carried out since 1995 with 3rd year architectural design students. For the exploration of compositions based on symmetry operations with computational support we followed a method developed by Celani (2003) comprising the automatic generation and update of symmetry patterns using AutoCAD. The exercises with computational support were combined with other different exercises in each semester. The first approach combined the creation of two-dimensional patterns to their application and to their modeling into three-dimensions. The second approach combined the work with computational support with work with physical models and mirrors and the analysis of the created patterns. And the third approach combined the computational tasks with work with two-dimensional physical shapes and mirrors. The student’s work was analyzed under aspects such as Discretion/ Continuity –the creation of isolated groups of shapes or continuous overlapped patterns; Generation of Meta-Shapes –the emergence of new shapes from the geometrical relation between the generative shape and the structure of the symmetrical arrangement; Modes of Representation –the visual aspects of the generative shape such as color and shading; Visual Reasoning –the derivation of 3D compositions from 2D patterns by their progressive analysis and recognition; Conscious Interaction –the simultaneous creation and analysis of symmetry compositions, whether with computational support or with physical shapes and mirrors. The combined work with computational support and with physical models and mirrors enhanced the students understanding on the extended concept of symmetry. The conscious creation and analysis of the patterns also stimulated the student’s understanding over the different semantic possibilities involved in the exploration of forms and shapes in two or three dimensions. The method allowed the development of both syntactic and semantic aspects of visual reasoning, enhancing the students’ visual repertoire. This constitutes an important strategy in the building of the cognitive abilities used in the architectural design process.
keywords	Symmetry, Cognition, Computing, Visual reasoning, Design teaching
series	SIGRADI
email
last changed	2016/03/10 09:47

_id	sigradi2003_119
id	sigradi2003_119
authors	Bermudez, J., Foresti, S., Agutter, J., Westenskow, D., Syroid, N. Drews, F. Tashjian, E. and Adams, V.
year	2003
title	Metodología Interdisciplinaria para Diseñar Nuevas Arquitecturas de Representación de Datos (Interdisciplinaria Methodologies for the Design of a New Architectures of Data Representation)
source	SIGraDi 2003 - [Proceedings of the 7th Iberoamerican Congress of Digital Graphics] Rosario Argentina 5-7 november 2003
summary	Data representation architecture can be defined as the organizational, functional, experiential, formal, and media-technological order defining the interaction between data, representation, and user. This paper presents an interdisciplinary methodology to develop such architectures in order to significantly improve real time decision making in complex data environments. We have reported in some aspects of this work elsewhere. In this occasion, we will describe our working methodology based on complete interdisciplinarity, the design process and evaluation protocols. We will show work done for Finance and Network Monitoring. Our long-term goal is to design a new generation of data representation architectures that is applicable to diverse fields.
keywords	Data representation; visualization; design, architecture, interdisciplinary
series	SIGRADI
email
last changed	2016/03/10 09:47

_id	ecaade03_187_11_brandy
id	ecaade03_187_11_brandy
authors	Brady, Darlene A.
year	2003
title	IDEATION: METAPHORICAL EXPLORATIONS AND DIGITAL MEDIA
doi	https://doi.org/10.52842/conf.ecaade.2003.187
source	Digital Design [21th eCAADe Conference Proceedings / ISBN 0-9541183-1-6] Graz (Austria) 17-20 September 2003, pp. 187-190
summary	Metaphor in architecture involves two distinct paradigms of ideation and visualization: architecture as a virtual metaphor of an idea and virtual models of architecture as metaphors of an architectural intention or vision. Digital media is a powerful vehicle for the generation and expression of both paradigms. The dominant applications of digital media in architecture are drafting and computer simulations as virtual constructs of an architectural intention. This paper will focus on the us e of digital media and ideation, a design process which uses metaphor to link idea and form early in the design process.
keywords	Design creativity, Design process, Generative design, Innovation, Precedents
series	eCAADe
email
more	http://www.archi-textures.com
last changed	2022/06/07 07:54

_id	acadia03_003
id	acadia03_003
authors	Chang, W. and Woodbury, R.
year	2003
title	Undo Reinterpreted
doi	https://doi.org/10.52842/conf.acadia.2003.019
source	Connecting >> Crossroads of Digital Discourse [Proceedings of the 2003 Annual Conference of the Association for Computer Aided Design In Architecture / ISBN 1-880250-12-8] Indianapolis (Indiana) 24-27 October 2003, pp. 19-27
summary	The class of operations known as “undo” has proven to be a valuable addition to most professional work tools. In practice though, its use is frustrating: undo often undoes too much. Its essential informal semantics are that it returns the user to a prior state by recapitulating all intervening states. Why not give the user greater control over which aspects of a design to undo? An alternative is to seek to reuse prior work in any logically-coherent pattern—user input is a precious commodity. The area of generative systems provides insights in a search for alternatives to undo, in particular that prior user and system actions can be changed and reused in new contexts. We contingently introduce a concept we label as design promotions to describe system designs that demonstrate a tight coupling between interactive authorship and system-led generation, that treat past user actions as valuable intentional statements, and that treat alternative user choices as first-class objects of concern. In practice these three properties emphasize reuse. We briefly survey the current state of undo-like operations and potential candidates for implementing design promotions strategies. Through examples, we demonstrate approaches to realizing undo-like operations over specific representations, especially that of constructive solid geometry.
series	ACADIA
email
last changed	2022/06/07 07:55

_id	ecaade03_025_202_kieferle
id	ecaade03_025_202_kieferle
authors	Drosdol, J., Kieferle, J. and Wössner, U.
year	2003
title	The Integration of Virtual Reality (VR) into the Architectural Workflow - Experiences with an interprofessional project at DaimlerChrysler
doi	https://doi.org/10.52842/conf.ecaade.2003.025
source	Digital Design [21th eCAADe Conference Proceedings / ISBN 0-9541183-1-6] Graz (Austria) 17-20 September 2003, pp. 25-28
summary	DaimlerChrysler as a worldwide operating company is continuously maintaining and developing their brand architecture for the points of sale. It is one of the strategic decisions to have a 'Brand Architecture Center' at the company headquarters in Stuttgart to develop the brand architecture and engage local architects to adopt it to the local context. As a major step, a new generation of autohauses is currently developed. Many aspects have to be taken care of in this process, therefore a great number of specialists have to be involved. They are supported by Virtual Reality (VR) and Augmented Reality (AR). To integrate VR/AR into the architectural process, necessary architectural interactions have been integrated into the software
keywords	Virtual Reality, Augmented Reality, Architectural workflow, Visualization,Simulation
series	eCAADe
email
more	http://www.architektur.fh-wiesbaden.de
last changed	2022/06/07 07:55

_id	sigradi2006_e028c
id	sigradi2006_e028c
authors	Griffith, Kenfield; Sass, Larry and Michaud, Dennis
year	2006
title	A strategy for complex-curved building design:Design structure with Bi-lateral contouring as integrally connected ribs
source	SIGraDi 2006 - [Proceedings of the 10th Iberoamerican Congress of Digital Graphics] Santiago de Chile - Chile 21-23 November 2006, pp. 465-469
summary	Shapes in designs created by architects such as Gehry Partners (Shelden, 2002), Foster and Partners, and Kohn Peterson and Fox rely on computational processes for rationalizing complex geometry for building construction. Rationalization is the reduction of a complete geometric shape into discrete components. Unfortunately, for many architects the rationalization is limited reducing solid models to surfaces or data on spread sheets for contractors to follow. Rationalized models produced by the firms listed above do not offer strategies for construction or digital fabrication. For the physical production of CAD description an alternative to the rationalized description is needed. This paper examines the coupling of digital rationalization and digital fabrication with physical mockups (Rich, 1989). Our aim is to explore complex relationships found in early and mid stage design phases when digital fabrication is used to produce design outcomes. Results of our investigation will aid architects and engineers in addressing the complications found in the translation of design models embedded with precision to constructible geometries. We present an algorithmically based approach to design rationalization that supports physical production as well as surface production of desktop models. Our approach is an alternative to conventional rapid prototyping that builds objects by assembly of laterally sliced contours from a solid model. We explored an improved product description for rapid manufacture as bilateral contouring for structure and panelling for strength (Kolarevic, 2003). Infrastructure typically found within aerospace, automotive, and shipbuilding industries, bilateral contouring is an organized matrix of horizontal and vertical interlocking ribs evenly distributed along a surface. These structures are monocoque and semi-monocoque assemblies composed of structural ribs and skinning attached by rivets and adhesives. Alternative, bi-lateral contouring discussed is an interlocking matrix of plywood strips having integral joinery for assembly. Unlike traditional methods of building representations through malleable materials for creating tangible objects (Friedman, 2002), this approach constructs with the implication for building life-size solutions. Three algorithms are presented as examples of rationalized design production with physical results. The first algorithm [Figure 1] deconstructs an initial 2D curved form into ribbed slices to be assembled through integral connections constructed as part of the rib solution. The second algorithm [Figure 2] deconstructs curved forms of greater complexity. The algorithm walks along the surface extracting surface information along horizontal and vertical axes saving surface information resulting in a ribbed structure of slight double curvature. The final algorithm [Figure 3] is expressed as plug-in software for Rhino that deconstructs a design to components for assembly as rib structures. The plug-in also translates geometries to a flatten position for 2D fabrication. The software demonstrates the full scope of the research exploration. Studies published by Dodgson argued that innovation technology (IvT) (Dodgson, Gann, Salter, 2004) helped in solving projects like the Guggenheim in Bilbao, the leaning Tower of Pisa in Italy, and the Millennium Bridge in London. Similarly, the method discussed in this paper will aid in solving physical production problems with complex building forms. References Bentley, P.J. (Ed.). Evolutionary Design by Computers. Morgan Kaufman Publishers Inc. San Francisco, CA, 1-73 Celani, G, (2004) “From simple to complex: using AutoCAD to build generative design systems” in: L. Caldas and J. Duarte (org.) Implementations issues in generative design systems. First Intl. Conference on Design Computing and Cognition, July 2004 Dodgson M, Gann D.M., Salter A, (2004), “Impact of Innovation Technology on Engineering Problem Solving: Lessons from High Profile Public Projects,” Industrial Dynamics, Innovation and Development, 2004 Dristas, (2004) “Design Operators.” Thesis. Massachusetts Institute of Technology, Cambridge, MA, 2004 Friedman, M, (2002), Gehry Talks: Architecture + Practice, Universe Publishing, New York, NY, 2002 Kolarevic, B, (2003), Architecture in the Digital Age: Design and Manufacturing, Spon Press, London, UK, 2003 Opas J, Bochnick H, Tuomi J, (1994), “Manufacturability Analysis as a Part of CAD/CAM Integration”, Intelligent Systems in Design and Manufacturing, 261-292 Rudolph S, Alber R, (2002), “An Evolutionary Approach to the Inverse Problem in Rule-Based Design Representations”, Artificial Intelligence in Design ’02, 329-350 Rich M, (1989), Digital Mockup, American Institute of Aeronautics and Astronautics, Reston, VA, 1989 Schön, D., The Reflective Practitioner: How Professional Think in Action. Basic Books. 1983 Shelden, D, (2003), “Digital Surface Representation and the Constructability of Gehry’s Architecture.” Diss. Massachusetts Institute of Technology, Cambridge, MA, 2003 Smithers T, Conkie A, Doheny J, Logan B, Millington K, (1989), “Design as Intelligent Behaviour: An AI in Design Thesis Programme”, Artificial Intelligence in Design, 293-334 Smithers T, (2002), “Synthesis in Designing”, Artificial Intelligence in Design ’02, 3-24 Stiny, G, (1977), “Ice-ray: a note on the generation of Chinese lattice designs” Environmental and Planning B, volume 4, pp. 89-98
keywords	Digital fabrication; bilateral contouring; integral connection; complex-curve
series	SIGRADI
email
last changed	2016/03/10 09:52

_id	acadia03_023
id	acadia03_023
authors	Ibrahim, Magdy and Krawczyk, Robert
year	2003
title	The Level of Knowledge of CAD Objects within the Building Information Model
doi	https://doi.org/10.52842/conf.acadia.2003.173
source	Connecting >> Crossroads of Digital Discourse [Proceedings of the 2003 Annual Conference of the Association for Computer Aided Design In Architecture / ISBN 1-880250-12-8] Indianapolis (Indiana) 24-27 October 2003, pp. 173-177
summary	The first generation of CAD software depended on entity objects that were manipulated and interpreted by the user as meaningful graphics symbols. These entities only represented the geometrical properties of the architectural elements. With the present emerging generation of CAD systems, a new concept shifts a drawing-based model into a Building Information Model with the potential of modeling true architectural objects. Theoretically, these CAD objects will provide all related data to the designer describing the geometry, as well as any related data associated with how the object is actually used. The knowledge required to support an object should have structure to it. Different levels of knowledge need to be included, such as the geometrical information, which should be flexible enough to accommodate any type of shape and modification while keeping the object’s integrity as a unit and maintaining its relations to other objects. The CAD object concept, as remarkable as it is, might also have potential problems. It has some implications over the design process, as well as the architectural profession itself.
series	ACADIA
email
last changed	2022/06/07 07:50

_id	acadia03_040
id	acadia03_040
authors	Katherine A. Liapi, Katherine A. and Kim, Jinman
year	2003
title	A Parametric Approach to the Design of a Tensegrity Vaulted Dome for an Ephemeral Structure for the 2004 Olympics
doi	https://doi.org/10.52842/conf.acadia.2003.301
source	Connecting >> Crossroads of Digital Discourse [Proceedings of the 2003 Annual Conference of the Association for Computer Aided Design In Architecture / ISBN 1-880250-12-8] Indianapolis (Indiana) 24-27 October 2003, pp. 301-309
summary	Tensegrity, defined as “tensional integrity,” is central to the design of a semi-open exhibition space that was submitted as an entry to the international competition for the design of “Ephemeral Structures for the City of Athens,” in the context of the 2004 Olympic Games. The main feature of the proposed exhibition space is a vaulted dome composed of interconnected detachable and deployable tensegrity units. The most challenging aspect in the design of the tensegrity vault was the generation of alternative spatial configurations for form exploration and study. For this purpose a mathematical code has been developed that links all the parameters that affect the design of tensegrity vaults. The code also allows for the parametric graphical generation of the vault by displaying geometric information in a 3D environment. This paper discusses the geometric basis of the code and its usefulness in the morphological study of the tensegrity vaulted dome for the proposed ephemeral structure. The mathematical code has been shown to significantly facilitate the study of various preliminary configurations of tensegrity vaulted structures.
series	ACADIA
email
last changed	2022/06/07 07:52

_id	sigradi2006_e149b
id	sigradi2006_e149b
authors	Kendir, Elif
year	2006
title	Prêt-à-Construire – An Educational Inquiry into Computer Aided Fabrication
source	SIGraDi 2006 - [Proceedings of the 10th Iberoamerican Congress of Digital Graphics] Santiago de Chile - Chile 21-23 November 2006, pp. 162-165
summary	This paper aims to show and discuss the relevance of developing necessary strategies for reintegrating the concept of fabrication into the architectural design process. The discussion will be partly based on the outcome of a graduate architectural design studio conducted in Spring semester 2002-2003. The graduate studio was part of a series of exploratory studies conducted on the nature of architectural design process transformed by information technologies. Preceded by studios investigating cognition and representation, this last studio focused on the concept of fabrication. The overarching aim of the studio series was to put CAD and CAM in context both within the actual architectural design process and within architectural education. The last of this series, which will be discussed within the frame of this paper, has specifically focused on CAM and the concept of fabrication in architecture. In accordance with the nature of a design studio, the research was more methodological than technical. The studio derived its main inspiration from the constructional templates used in dressmaking, which can be considered as an initial model for mass customization. In this context, the recladding of Le Corbusier’s Maison Domino was given as the main design problem, along with several methodological constraints. The main constraint was to develop the design idea through constructional drawings instead of representational ones. The students were asked to develop their volumetric ideas through digital 3D CAD models while working out structural solutions on a physical 1/50 model of Maison Domino. There was also a material constraint for the model, where only specified types of non-structural paper could be used. At this stage, origami provided the working model for adding structural strength to sheet materials. The final outcome included the explanation of different surface generation strategies and preliminary design proposals for their subcomponents. The paper will discuss both the utilized methodology and the final outcome along the lines of the issues raised during the studio sessions, some of which could be decisive in the putting into context of CAD – CAM in architectural design process. One such issue is mass customization, that is, the mass production of different specific elements with the help of CAM technologies. Another issue is “open source” design, indicating the possibility of a do-it-yourself architecture, where architecture is coded as information, and its code can be subject to change by different designers. The final key issue is the direct utilization of constructional drawings in the preliminary design phase as opposed to representational ones, which aimed at reminding the designer the final phase of fabrication right from the beginning. Finally, the paper will also point at the problems faced during the conduct of the studio and discuss those in the context of promoting CAM for architectural design and production in countries where there is no actual utilization of these technologies for these purposes yet.
keywords	Education; Fabrication; CAM
series	SIGRADI
email
last changed	2016/03/10 09:53

_id	acadia03_010
id	acadia03_010
authors	Kilian, Axel
year	2003
title	Fabrication of Partially Double-Curved Surfaces out of Flat Sheet Material Through a 3D Puzzle Approach
doi	https://doi.org/10.52842/conf.acadia.2003.075
source	Connecting >> Crossroads of Digital Discourse [Proceedings of the 2003 Annual Conference of the Association for Computer Aided Design In Architecture / ISBN 1-880250-12-8] Indianapolis (Indiana) 24-27 October 2003, pp. 75-83
summary	The topic of this paper is the connection of digital modeling with generative programming and rapid prototyping, to produce physical sketch surface models. The physical surface models are assembled out of developable strips connected through a puzzle-like detail. The use of programming as a design approach allows the generation of connection details that corresponds to the rules of flat sheet rapid prototyping techniques of laser cutting and water jet cutting. With numerically controlled cutting, there is no need to keep the joint detail related to manually achievable forms or to apply a standardized dimension. This paper demonstrates the possibilities of programming to generate cutting geometries that adapt to the local surface properties. The larger perspective of the research approach is the question of how to formulate and capture design intention through programming. What influence does the use of generative modeling in combination with rapid prototyping have on the design language of physical objects?
series	ACADIA
email
last changed	2022/06/07 07:52

For more results click below: