Cumincad : CUMINCAD Papers : Search Results

CumInCAD is a Cumulative Index about publications in Computer Aided Architectural Design
supported by the sibling associations ACADIA, CAADRIA, eCAADe, SIGraDi, ASCAAD and CAAD futures

PDF papers
References

Hits 1 to 20 of 53

Reformat results as: short short into frame detailed detailed into frame

_id	cf2003_m_016
id	cf2003_m_016
authors	CHEN, Hong-Sheng and LIN, Feng-Tyan
year	2003
title	A Simulation Study on Public Building's Staircase Fault Tolerance
source	Digital Design - Research and Practice [Proceedings of the 10th International Conference on Computer Aided Architectural Design Futures / ISBN 1-4020-1210-1] Tainan (Taiwan) 13–15 October 2003, pp. 393-402
summary	This paper applies the concept of fault tolerance to staircase layout plan. Fire or smoke may cause some staircases in a building inaccessible. We argue that architects should assess the result from the possible fault of vertical routes. The capability of tolerating staircase faults depends on space usage, arrangement, and pedestrian attributes. In this study, a mathematical model is constructed. For analysing pedestrian's movement in interior space, we employ Monte Carol simulation and Agent-Based Modelling method in a CAAD environment. It helps us to visualise the dynamic process of agent's evacuation process, and to test the problem of possible staircase faults. Finally, a case study brings some important discoveries.
keywords	agents, fault tolerance, simulation
series	CAAD Futures
last changed	2003/09/22 12:21

_id	caadria2003_b4-3
id	caadria2003_b4-3
authors	Chen, Hong-Sheng and Lin, Feng-Tyan
year	2003
title	Computer Aided Performance Analysis of Staircase Fault Tolerance
doi	https://doi.org/10.52842/conf.caadria.2003.567
source	CAADRIA 2003 [Proceedings of the 8th International Conference on Computer Aided Architectural Design Research in Asia / ISBN 974-9584-13-9] Bangkok Thailand 18-20 October 2003, pp. 567-578
summary	This study is to investigate the performance of staircases in a building with some faulty staircases. In this building, any unexpected hazard or repairs may cause vertical escaping routes inaccessible. Therefore, it is crucial that architects should assess this condition, and the users also need to be aware of this problem. Facing those staircase faults, architects need to consider space usage, staircases arrangement, and pedestrian attributes. This paper proposes a method to model the pedestrian's movement in the interior space of abovementioned building. We applied Monte Carlo simulation and AgentBased Modeling method in a CAAD environment. And we will apply two case studies to bring forward some important discoveries and support our arguments.
series	CAADRIA
email
last changed	2022/06/07 07:55

_id	ecaade2014_147
id	ecaade2014_147
authors	James Charlton and Markus Brune
year	2014
title	Towards a dynamic evacuation system: developing methodologies to simulate the evacuation capabilities of subway stations in response to a terrorist attack with CBRNE weapons
doi	https://doi.org/10.52842/conf.ecaade.2014.1.109
source	Thompson, Emine Mine (ed.), Fusion - Proceedings of the 32nd eCAADe Conference - Volume 1, Department of Architecture and Built Environment, Faculty of Engineering and Environment, Newcastle upon Tyne, England, UK, 10-12 September 2014, pp. 109-118
summary	Events in recent times have highlighted the vulnerability of underground public transportation to possible terrorist attacks. A key question therefore is how an evacuation can be accomplished from underground stations safely. The strategy “go up and take the nearest exit to the surface” might not be the best response. Evidence from the Daegu subway station fire in 2003, investigated by Tsujimoto (2003) and Jeon and Hong (2009) establish that smoke or toxic airborne substances from a terrorist attack tend to use the same direct routes used by the fleeing passengers and as result significant injuries or fatalities can occur. This study proposes the concept of a dynamic evacuation system which would guide subway users along safe routes. To test how this system may operate, the study discussed combines measurements from tracer gas experiments with climate measurements to establish how toxic agents spread in subway stations under certain conditions and combines these results with those from pedestrian simulations applied to calculate evacuation times for possible escape routes. By integrating the resulting dataset from these methods, an evidence base of how a dynamic evacuation system may work can start to form.
wos	WOS:000361384700010
keywords	Pedestrian simulation, subway climatology; cbrne; subway evacuation; tracer gas experiments
series	eCAADe
email
last changed	2022/06/07 07:52

_id	acadia03_034
id	acadia03_034
authors	Luhan, G.A., Bhavsar, S. and Walcott, B.L.
year	2003
title	Deep-Time ProbeInvestigations in Light Architecture
doi	https://doi.org/10.52842/conf.acadia.2003.258
source	Connecting >> Crossroads of Digital Discourse [Proceedings of the 2003 Annual Conference of the Association for Computer Aided Design In Architecture / ISBN 1-880250-12-8] Indianapolis (Indiana) 24-27 October 2003, pp. 258-266
summary	This paper presentation presents an interdisciplinary research project conducted by a design team comprised of faculty from the Colleges of Architecture, Engineering, and Astrophysics. The title of the project, Deep-Time Probe, Investigations in Light-Architecture, explores the use of an optically active-SETI experiment that centers on the thematic of time, vision, and movement through space. The realm of architecture was the digital glue that united the varied disciplines. The core of the project is broken down into three intrinsically linked components—data representation—collection, storage, and modulation; the Project Mission Wall; and the resultant Light Architecture or Deep-Time Probe. A small team of architecture students under the direction of one architecture faculty member designed the Mission Wall while the Robotics Department provided CNC machinery to digitally mill and fabricate its components. This same team assembled the 40’x60’x15’ structure in one day. The site of the launch created an adequate interface for the public art structure at the scale of an urban park. The scale of the Mission Wall addressed a variety of places, paces, and scales that mediated between the laser, the context of the surrounding plaza, and pedestrian and vehicular circulation, all while concealing the laser from direct view. The Mission Wall served three functions. It provided a housing for the Deep-Time Probe laser. It created windows and scaffolding for lighting. Moreover, it established a series of “View Corridors” that provided the onlooker with multiple vantage points and thus multiple-readings of information as architecture. Nearly fifty “Time Probe Reporters” gathered information through oral interviews. In addition to messages linked to the interviews, the Deep-Time Probe contained verbal and graphic information, images depicting the design and fabrication processes. At the time of the launch, the design team digitized, specially formatted, converted, and modulated the data into a special high-powered laser that was “launched” into space. An advanced civilization in the universe could theoretically receive and decode this information. The Deep-Time Probe project visualized the strengths of each profession, fostered the creative aspects of each team member, and resulted in a unique and dynamic experience. The deep time probe is right now passing through the Oort Cloud, the debris left over from the formation of our Sun and planets, present as a halo surrounding our solar system . . . a distance of nearly 1.5 trillion miles.
keywords	Interdisciplinary Design Research, Information Visualization, and Fabrication
series	ACADIA
email
last changed	2022/06/07 07:59

_id	acadia03_005
id	acadia03_005
authors	Maher, Andrew and Burry, Mark
year	2003
title	The Parametric Bridge: Connecting Digital Design Techniques in Architecture And Engineering
doi	https://doi.org/10.52842/conf.acadia.2003.039
source	Connecting >> Crossroads of Digital Discourse [Proceedings of the 2003 Annual Conference of the Association for Computer Aided Design In Architecture / ISBN 1-880250-12-8] Indianapolis (Indiana) 24-27 October 2003, pp. 39-47
summary	New design opportunities that are facilitated by cross-disciplinary collaboration in both practice and research are available through the use of high level design software that simultaneously offers real time access to both analysis and design geometry in shared three-dimensional digital models. Here we present a collaborative research project between architects and structural engineers for the design of a pedestrian bridge, conceived to test current digital design processes in architectural and structural engineering practice with those in research through the use of models of parametrically defined associative geometry. In this project, the digital model’s architectural design geometry was constrained by the bridge’s fabrication methods and linked with its engineering analysis. Iterations of the design geometry were then optimised or ‘solved’ to produce variations according to the design parameters offered up for change. The shift of the professions from the plane to digital space exposes the possibilities of new design techniques with the exchange of design parameters potentially operating as a digital dialogue between the disciplines—a kind of digital version of Antoni Gaudi’s funicular hanging model—a metaphor of the digital space that has been developed for this project.
series	ACADIA
email
last changed	2022/06/07 07:59

_id	7655
authors	Okeil, Ahmad and El Araby, Mostafa
year	2003
title	Realism vs. Reality in Digital Reconstruction of Cities
source	CORP 2003, Vienna University of Technology, 25.2.-28.2.2003 [Proceedings on CD-Rom]
summary	The digital reconstruction of existing cities using virtual reality techniques is being increasingly used. For consultants, municipalities and planning departments these models provide decision support through visual simulations (El Araby, 2001). For academia they provide a new tool for teaching students urban design and planning (Okeil, 2001). For authorities they provide a tool for promoting the city on the world wide web trying to attract more businesses and tourists to it. The built environment is very rich in detail. It does not only consist of open spaces surrounded by abstract buildings but it also includes many smaller objects such as street furniture, traffic signs, street lights, different types of vegetation and shop signs for example. All surfaces in the built environment have unique properties describing color, texture and opacity. The built environmentis dynamic and our perception is affected by factors such as pedestrian movement, traffic, environmental factors such as wind, noise and shadows. The built environment is also shaped by the accumulation of changes caused by many influences through time. All these factors make the reconstruction of the built environment a very complex task. This paper tries to answer the question: how realistic the reconstructed models of urban areas can be. It sees “Realism“ as a variable floating between three types of realties. The reality of the physical environment which we are trying to represent. The reality of the digital environment which will host the digitally reconstructed city. And the reality of the working environment which deals with the problem of limitation of resources needed to digitally reconstruct the city. A case study of building a 3D computer model of an urban area in the United Arab Emirates demonstrates that new time-saving techniques for data acquisition can enhance realism by meetingbudget limitations and time limitations.
keywords	Virtual Reality; Photo Realism; Texture Maps; 3D Modeling; Urban Design
series	other
email
last changed	2003/03/11 20:39

_id	avocaad_2003_13
id	avocaad_2003_13
authors	John L. Heintz
year	2003
title	Communication and Value in Networked Design Coalitions
source	LOCAL VALUES in a NETWORKED DESIGN WORLD - ADDED VALUE OF COMPUTER AIDED ARCHITECTURAL DESIGN, Stellingwerff, Martijn and Verbeke, Johan (Eds.), (2004) DUP Science - Delft University Press, ISBN 90-407-2507-1.
summary	The advent of the Internet has led us to believe that we live in an era of unprecedented globalization. In the field of building design, we now expect both that the local market for design services will be altered, and that many firms will take up the opportunity to pursue commissions beyond their local market. To some extent this is true, but it is instructive to recall that in the 19th century London based architectural firms and public works designers designed buildings throughout the Empire. Designing for projects beyond the local market is not new, what is new is our expectation that such a task is now fundamentally altered, made easier and more transparent, by the abundance of new communications technologies.It remains the case that working outside one’s local context is difficult and that when doing so, problems are likely to arise out of cultural differences. Distance too imposes its burdens, as the possibility to meet other members of the team face to face is reduced as the travel costs increase. This breaks down the possibilities of building informal networks among the individual designers working for the firms that are members of the design team. A re-instantiation of this informal network can only be done on the basis of a model of formal and informal communication in the design team. Many of the difficulties of collaborative work outside one’s local market are problems that have already been with us a long time. These problems arise out of the fact that buildings are designed by heterogeneous groups of people. The members of such groups must communicate with each other to share information and coordinate decisions and actions. Yet they are in different relations to the project at hand and have differing values arising out of their different backgrounds. This leads inevitably to conflict. Therefore, if we are to discuss communication and value then we must devote our attentions to conflict.
keywords	Architecture, Local values, Globalisation, Computer Aided Architectural Design, Communication, values, informal communication, value resolution, design team, design coalition.
series	AVOCAAD
email
last changed	2006/01/16 21:38

_id	acadia03_037
id	acadia03_037
authors	Anders, Peter
year	2003
title	Cynergies: Technologies that Hybridize Physical and Cyberspaces
doi	https://doi.org/10.52842/conf.acadia.2003.289
source	Connecting >> Crossroads of Digital Discourse [Proceedings of the 2003 Annual Conference of the Association for Computer Aided Design In Architecture / ISBN 1-880250-12-8] Indianapolis (Indiana) 24-27 October 2003, pp. 289-297
summary	This paper presents ways in which cybrids depend for their technology upon three existing models of architectural hybrid: display space, environmental computing, and augmented/mixed reality. Cybrids bring these techniques together into a synergistic whole that depends as much on the observer for its consistency as it does on its comprising technologies. This synergy is a product of corroborative behavior between different modes, which provide cybrid users with a coherent social/spatial experience. The paper notes cybrids’ similarity to theater, not only for their technological dependency, but also for the tacit yet vital role of the observer in their effect.
series	ACADIA
email
last changed	2022/06/07 07:54

_id	43f0
id	43f0
authors	Flynn, D., van Schaik, P., Blackman, T., Fencott, P.C., Hobbs, B., & Calderon, C.
year	2003
title	DEVELOPING A VIRTUAL REALITY-BASED METHODOLOGY FOR PEOPLE WITH DEMENTIA: A FEASIBILITY STUDY.
source	Journal of CyberPsychology and Behavior, Vol6, Number6, 2003.
summary	The aim of this study was to examine the feasibility of virtual reality (VR) technology for use by persons with dementia (PWD). Data were obtained directly from six PWD regarding their experiences with a virtual environment (VE) of a large outdoor park. A user-centered method was developed to assess: (a) presence; (b) user inputs; (c) display quality; (d) simulation fidelity; and (e) overall system usability. The extent to which PWD could perform four functional activities in the VE was also investigated (e.g., mailing a letter). In addition, physical and psychological well-being of PWD while interacting with the VE was assessed objectively by recording heart rate during the VR sessions and subjectively with discrete questionnaire items and real-time prompts. Symptom profiles associated with simulator sickness were assessed with an adapted version of the Simulator Sickness Questionnaire. The study found that PWD to some extent experienced presence; perceived that objects were realistic and moved naturally; generally felt in control of the interaction; and demonstrated little difficulty using a joystick for navigation. The study also demonstrated that VR is an appropriate medium for assessing functional behavior within the context of an ecologically valid VE. PWD did not experience any significant increase in symptoms associated with simulator sickness, or detriments to their psychological and physical well-being. These findings demonstrated that it is feasible to work in VEs with PWD.
keywords	Dementia, VR
series	journal paper
type	normal paper
email
last changed	2005/12/02 11:36

_id	ijac20031308
id	ijac20031308
authors	Garcia Alvarado, Rodrigo; Baesler Abufarde, Felipe; Moreno, Pedro Rodriguez; Bravo, Mauricio Pezo
year	2003
title	Modeling of Activities: an approach to the virtual representation of human behaviors in architectural spaces tested in emergency units
source	International Journal of Architectural Computing vol. 1 - no. 3
summary	Despite the increasing interest in the functionality and humanization of architecture, there are few studies covering the occupation of buildings and methods to represent activities in spaces. This article explores new software for simulating and virtual modeling in order to facilitate the analysis and visualization of events in buildings. Of particular importance is programming the behavior of 3D-characters according to the probabilistic evolution of activities, and producing animations and interactive models. This approach was tested in a study of three emergency units of hospitals in Chile. Although a full integration of software was not possible, the process developed (in particular the subjective tours) demonstrated that the technique can provide new information about the functioning and spatiality of the units. In addition, it suggested operative and architectural improvements supporting the management and design of facilities.
series	journal
more	http://www.multi-science.co.uk/ijac.htm
last changed	2007/03/04 07:08

_id	ecaade03_615_54_kheng
id	ecaade03_615_54_kheng
authors	Lim, Chor-Kheng
year	2003
title	Is a pen-based system just another pen or more than a pen?
doi	https://doi.org/10.52842/conf.ecaade.2003.615
source	Digital Design [21th eCAADe Conference Proceedings / ISBN 0-9541183-1-6] Graz (Austria) 17-20 September 2003, pp. 615-622
summary	Freehand sketch is the most critical stage in the design process. The importance of the freehand sketch is in its ability to freely represent various projections of ambiguous drawing using a convenience tool, pen-and-paper. Recently, pen-based system which developed attempted to use pen as an input device, allowing sketches to be freely drawn on computers. However, as far as the various drawing projections, such as diagram, symbol, plan, elevation, section, perspective, etc., how are they interrelated to a designer’s cognitive behavior? Different media have different abilities to represent projections. What’s the difference of design cognitive behavior between conventional pen-and paper and pen-based system in view of both using a pen as a design medium? This research proceeds a think-aloud protocol analysis to present an analysis and discussion. Research results show that there is a relationship of gradual embodiment, mutually complementary, going from a whole to being dissected into sections between the different projections. Moreover, pen-based system is more than a pen, it allows designer to inspect a 3-D view during the sketching stage. This gives the designer more opportunities during the sketching stage to conduct the design thinking process based on the ambiguous 2-D projections and the more concrete 3-D images, as well as more opportunities for visual feedback
series	eCAADe
email
last changed	2022/06/07 07:59

_id	acadia03_049
id	acadia03_049
authors	Lim, Chor-Kheng
year	2003
title	An Insight into the Freedom of Using a Pen: Pen-based System and Pen-and-paper
doi	https://doi.org/10.52842/conf.acadia.2003.385
source	Connecting >> Crossroads of Digital Discourse [Proceedings of the 2003 Annual Conference of the Association for Computer Aided Design In Architecture / ISBN 1-880250-12-8] Indianapolis (Indiana) 24-27 October 2003, pp. 385-393
summary	In earlier researches on freehand sketching, the cognitive behavior of designers was studied. In recent years, some researchers began to look into this area from the design media aspect. The pen-based system, developed by Gross, Landay and other researchers, used the pen as an input device, allowing sketches to be freely drawn in a computer environment. The importance of the freehand sketch lies in its ability to freely represent various drawing projections using ambiguous sketches. However, as for the various drawing projections, such as diagrams, symbols, plans, elevations, sections, perspectives, etc., how are they interrelated to a designer’s thinking process and the cognitive behavior? Different media have different abilities to represent different projections. Would they affect the designer’s design thinking as well? Targeting different media, i.e., conventional freehand sketches vs. the computer pen-based system, this research uses case studies and think-aloud protocol analysis to present an analysis and discussion. Research results show that there is a relationship of gradual embodiment that is mutually complementary, going from a whole perspective to being the dissected into sections between the different projections. In addition, these projections restrict the designer’s various design thinking processes, while the use of different media may somewhat change the actual design thinking of the designer
series	ACADIA
email
last changed	2022/06/07 07:52

_id	6943
id	6943
authors	ML Maher, G Smith and JS Gero
year	2003
title	DESIGN AGENTS IN 3D VIRTUALWORLDS
source	IJCAI03 Workshop on Cognitive Modeling of Agents and Multi-Agent Interaction, R Sun (ed), IJCAI, Acapulco, pp 92-100.
summary	Design agents are rational agents that monitor and modify elements of a designed environment. Special characteristics of design agents include the ability to reason about patterns and concepts, and the ability to act autonomously in modifying or changing the design to achieve their own goals. 3D Virtual Worlds are multi-user distributed systems that provide a designed environment and a closed world environment for studying design agents in a multiagent system. We present a model for a design agent reasoning process and a model for constructing a memory of the agent’s knowledge and interaction with a virtual world. The reasoning process includes sensation, perception, conception, hypothesizing, and planning a sequence of actions. Each agent has a constructed memory: a dynamic and changing view of the designed world that is determined by the agents sense data and reasoning. The agents construct and maintain a representation of the relevant objects in the world using a Function- Behavior-Structure formalism in order to reason about the intended and actual functions of the designed objects in the world. We have implemented this agent model by extending the Active Worlds platform so that each object in the 3D world can have agency. We illustrate the model with a door agent and a multi-agent room that reason about the use of the 3D world.
keywords	design agents, virtual worlds, FBS framework
type	normal paper
email
last changed	2004/04/10 02:47

_id	eaea2005_151
id	eaea2005_151
authors	Ohno, Ruyzo
year	2006
title	Seat preference in public squares and distribution of the surrounding people: An examination of the validity of using visual simulation
source	Motion, E-Motion and Urban Space [Proceedings of the 7th European Architectural Endoscopy Association Conference / ISBN-10: 3-00-019070-8 - ISBN-13: 978-3-00-019070-4], pp. 151-163
summary	Public squares are shared by people who use them for various purposes. When people choose seats in a square, they unconsciously evaluate not only the physical characteristics of the space but also the distribution of others already present (Hall, 1966; Sommer, 1969; Whyte, 1988). Knowing the hidden rules of this behaviour will be important in designing squares that remain comfortable even in crowded situations. Most past studies of seat choice preference have reported on statistical tendencies derived from observations of subject behavior in actually existing sites (i.e., Abe, 1997; Imai, 1999; Kawamoto, 2003). However, they provide no clear theoretical model for explaining the basic mechanisms regulating such behaviour. The present study conducts a series of experiments in both real and virtual settings in order to extract quantitative relationships between subjects’ seat preferences and the presence of nearby strangers and to clarify what factors influence their seat choices.
series	EAEA
type	normal paper
email
more	http://info.tuwien.ac.at/eaea
last changed	2008/04/29 20:46

_id	sigradi2022_112
id	sigradi2022_112
authors	Toledo, Jimena
year	2022
title	The Role of Visual Platforms -visual Social Media- in the Creative Design Process
source	Herrera, PC, Dreifuss-Serrano, C, Gómez, P, Arris-Calderon, LF, Critical Appropriations - Proceedings of the XXVI Conference of the Iberoamerican Society of Digital Graphics (SIGraDi 2022), Universidad Peruana de Ciencias Aplicadas, Lima, 7-11 November 2022 , pp. 639–650
summary	In the current design practice, new digital tools have emerged -visual- also called Infrastructures (Perkel, 2011) such as; Behance 2003, Pinterest 2009, Archdaily 2008, Instagram (2010) -to cite the most recognized in the creative field in Argentina-, which promote different opportunities and support the creative process and problem solving, making it easier for designers to find inspiring material through the Internet. However, very little is known about how these new practices affect professional work, how they themselves see it and the tensions they generate.This article will present the results of a general survey applied to expert designers as part of the first stage of the Doctoral Research project. Which investigates the behavior referred specifically to the use of visual platforms -visual social media- in order to understand, characterize, describe the use and involvement of them within the design process.
keywords	Project processes - Creativity - Design process - Visual Social Media -Curatorial Practice
series	SIGraDi
email
last changed	2023/05/16 16:56

_id	ecaade03_125_207_tsou
id	ecaade03_125_207_tsou
authors	Tsou, J.-Y., Lam, S. and Xue, Y.
year	2003
title	Scientific Modeling for Bridging the Environmental Design and Social Behavior in Hyper Dense Urban Open Space Planning
doi	https://doi.org/10.52842/conf.ecaade.2003.125
source	Digital Design [21th eCAADe Conference Proceedings / ISBN 0-9541183-1-6] Graz (Austria) 17-20 September 2003, pp. 125-129
summary	In Hong Kong, about 46% of the population lives in public housing estates. The density of the estates could be as high as 2,500 persons per hectare and there is an increased pressure for increasing the density. Therefore, open space in the estates contributes significantly for relieving the sense of over-congestion. Preliminary study shows that the usage of these open spaces is as low as 1.36%, and the low usage rate is largely due to inappropriate planning and design, particularly with respect to climate requirements, rather than insufficient area. Researchers thus attempt to overlay the user-behavior with the environment-behavior data to investigate the impact of irresponsive environmental design on the user-behavior. It is also this exercise that provides new thoughts to research of social behavior and activity study for high density urban habitation.
keywords	Building simulation: post-occupancy evaluation; behavior maps; planningand design for hyper dense habitation environment
series	eCAADe
email
last changed	2022/06/07 07:57

_id	sigradi2003_066
id	sigradi2003_066
authors	Vazquez, J., Armesto, T. and Dri, E.
year	2003
title	Análisis del Comportamiento Lumínico en Edificios mediante Herramientas Digitales (Analysis of the lighting Behavior in Buildings by means of Digital Tools)
source	SIGraDi 2003 - [Proceedings of the 7th Iberoamerican Congress of Digital Graphics] Rosario Argentina 5-7 november 2003
summary	In temperate humid climates, like Rosario city, (33 S, 60 W), in which heating and cooling loads are required seasonally, daylighting and artificial lighting optimization, under an energy saving basis are essential issues for designers. Energy reduction in buildings permits lower functioning costs, better maintenance, and overall economy. Electricity consumption in offices has increased in the latest years due to an intensive use of artificial lighting and new appliances (computers, printers). This equipment also generates heat which must be eliminated, increasing further energy consumption. This paper focuses on spaces assessment and adjustment through digital tools aid, so as to evaluate strategies of interior lighting performance.
series	SIGRADI
email
last changed	2016/03/10 10:02

_id	avocaad_2003_09
id	avocaad_2003_09
authors	Alexander Asanowicz
year	2003
title	Form Follows Media - Experiences of Bialystok School of Architectural Composition
source	LOCAL VALUES in a NETWORKED DESIGN WORLD - ADDED VALUE OF COMPUTER AIDED ARCHITECTURAL DESIGN, Stellingwerff, Martijn and Verbeke, Johan (Eds.), (2004) DUP Science - Delft University Press, ISBN 90-407-2507-1.
summary	This paper considers transition from physical modelling to digital methods of the creation of architectural forms. Every type of creation has constructed the proper means of expression and its own methodology. The main thesis of this paper is that a specific character of the composition activity of an architect is determined by the modelling methods. As the research on architectural modelling, the two methods of creating spatial architectural forms (cardboard model and computer model) have been compared. Research has been done on the basis of the same exercise for both media. The process of creation proceeded in the same way, too. As the start point students have found the inspiration. Each student presented photos of existing architectural objects and a text, which explained the reasons of the choice. Next steps were sketches of the idea and realisation of the model. The achieved results of creative activity fully confirm the thesis of the research.
keywords	Architecture, Local values, Globalisation, Computer Aided Architectural Design
series	AVOCAAD
email
last changed	2006/01/16 21:38

_id	avocaad_2003_06
id	avocaad_2003_06
authors	Arturo F. Montagu and Juan Pablo Cieri
year	2003
title	Urbamedia - Development of an urban database of fragments of some Argentinian and Latin-American cities using digital technology
source	LOCAL VALUES in a NETWORKED DESIGN WORLD - ADDED VALUE OF COMPUTER AIDED ARCHITECTURAL DESIGN, Stellingwerff, Martijn and Verbeke, Johan (Eds.), (2004) DUP Science - Delft University Press, ISBN 90-407-2507-1.
summary	The proposal of "Urbamedia" is to undertake the development of 3D virtual and interactive models of historical areas of Latin-American cities. The selected zone is the "Mayo Avenue" including the "Mayo Square", an historical place of the city of Buenos Aires, Argentina; this project is financed by the National Agency of Scientific and Technological Development of Argentina and the University of Buenos Aires.We are presenting the first experimental model of the "Mayo Square" that has been developed at ABACUS, Department of Architecture & Building Aids Computer Unit, University of Strathclyde UK. combined with a system analysis of urban activities using the “Atlas.ti” CAQDAS software.This particular use of the “Atlas.ti” software is under experimental applications to this type of urban analysis procedures; allowed us the possibility to analysed a set of activities by means of graph theory as result of a series of interviews to the people working in the area. We are also looking to include historical areas of three cities: Mar del Plata, Rosario and Santa Fe (Argentina) and eventually other cities from Latin América as Rio de Janeiro and Habana.Due that ABACUS has a strong experience in city modelling plus the powerful software and hardware used there, we must develop a VRML customized menu to be adapted to our low cost PC equipment. The 3D model will be used mainly in urban design simulation procedures and the idea is to extend to other type of simulations of the environmental parameters.
keywords	Architecture, Local values, Globalisation, Computer Aided Architectural Design
series	AVOCAAD
email
last changed	2006/01/16 21:38

_id	ecaade03_587_34_asanowicz
id	ecaade03_587_34_asanowicz
authors	Asanowicz, Alexander
year	2003
title	Architectural Composition in Digital Space
doi	https://doi.org/10.52842/conf.ecaade.2003.587
source	Digital Design [21th eCAADe Conference Proceedings / ISBN 0-9541183-1-6] Graz (Austria) 17-20 September 2003, pp. 587-590
summary	In this paper the possibilities of using the computers at course of architectural compositions are considered. As the start point of the new teaching method of architectural composition we used the course of tradition architectural composition, elaborated at our Faculty. The course of Digital Architectural Composition was finished in 2002. The main goal of using the new digital media for modelling architectural forms was checking the new possibilities of form creation. Traditionally, searching of forms at the conceptual design stage is performed by using sketches, drawings and physical models. Our new method showed that is possible to do the same thing using the computerbased 3D modelling, experiencing no physical limitations of the 'real' substance. At the same time, at the early design stages, when formal value is sought, computer modelling can be done almost intuitively. In ours work we try to find a creative way of using computer - transforming the tool into medium. The attention was paid on exploring the possibilities characteristic for computers and not available with traditional methods of modelling. Architect’s tradition tools are effectively replaced by a computer, which create a new way of doing things.
keywords	Architectural composition, computer modelling, method of teaching
series	eCAADe
email
last changed	2022/06/07 07:54

For more results click below: