Cumincad : CUMINCAD Papers : Search Results

CumInCAD is a Cumulative Index about publications in Computer Aided Architectural Design
supported by the sibling associations ACADIA, CAADRIA, eCAADe, SIGraDi, ASCAAD and CAAD futures

PDF papers
References

Hits 1 to 20 of 476

Reformat results as: short short into frame detailed detailed into frame

_id	ecaade03_017_136_franz
id	ecaade03_017_136_franz
authors	Franz, G., Von der Heyde, M. and Bülthoff, H.H.
year	2003
title	An empirical approach to the experience of architectural space in VR - Exploring relations between features and affective appraisals of rectangular interiors
doi	https://doi.org/10.52842/conf.ecaade.2003.017
source	Digital Design [21th eCAADe Conference Proceedings / ISBN 0-9541183-1-6] Graz (Austria) 17-20 September 2003, pp. 17-24
summary	While it is well known that the built environment influences our emotional state, it is often difficult to attribute these experiences to particular properties. In fact, a systematic investigation of the relation between physical structure and emotional experience of architecture has not yet been done. Now virtual reality simulations facilitate a completely controlled variation of spatial properties and thus allow to empirically evaluate architectural hypothesises. The aim of the presented study was to investigate which factors from a component-based description of rooms significantly correlate with cardinal dimensions of experience. In a perceptual experiment experiental qualities of 16 virtual vacant rectangular interiors were rated in eight principal categories by 16 participants using the semantic differential scaling technique. The scenes were generated by a custom made graphics tool that also automatically generated the component-based scene descriptions. The data analysis revealed several interesting correlations between scene features and rated experience: For example, a preference for ratios near to the golden section could be observed for spatial proportions, which are not directly perceivable. Altogether, a set of five independent factors (openness, two room proportions, room area and balustradeheight) appeared to be effective for widely describing the observed variance of the averaged attributed experiental qualities. Our combination of realistic virtual reality simulations and psychophysical data raising methods proved to be effective for basic architectural research. It allowed us to demonstrate quantitative relations between physical properties from a component-based description of architectural space and its emotional experience.
keywords	Experiental Qualities; Psychophysics; Correlation Analysis; Virtual Reality
series	eCAADe
email
more	http://www.kyb.tuebingen.mpg.de/~gf
last changed	2022/06/07 07:50

_id	ecaade03_315_146_he
id	ecaade03_315_146_he
authors	He, Jie and Tsou, Jin-Yeu
year	2003
title	GIS Support in a Visual Resource Management System for Visual Sustainability of Urban Natural Landscape in China
doi	https://doi.org/10.52842/conf.ecaade.2003.315
source	Digital Design [21th eCAADe Conference Proceedings / ISBN 0-9541183-1-6] Graz (Austria) 17-20 September 2003, pp. 315-318
summary	The proposed VLM system intends to facilitate the visual sustainability of urban natural landscape in China. In this system, GIS not only provides technologies for the inventory of landscape characteristics and the visual landscape evaluation, but also contributes to public or professional communication supporting through modeling and visualization. Therefore, GIS holistically acts as a fundamental support in this prototype system. Combining with psychophysical landscape evaluation (LE), photogrammetry and other digital 3D visualization, GIS provides quantitative data, scientific visualization and visual simulation for planning decision making.
keywords	Geographic information system (GIS); visual resource management (VRM);natural landscape; urban planning
series	eCAADe
email
more	http://www.arch.cuhk.edu.hk/
last changed	2022/06/07 07:49

_id	ijac20031108
id	ijac20031108
authors	Hirschberg, Urs
year	2003
title	Transparency In Information Architecture: Enabling Large Scale Creative Collaboration in Architectural Education over the Internet
source	International Journal of Architectural Computing vol. 1 - no. 1
summary	This paper is about networked collaboration in architectural education and about information architecture for networked collaborations. It presents results of a quantitative process analysis of two types of courses in Computer Aided Architectural Design that were taught using database-driven online environments. The main focus of the quantitative analysis is the performance of these online environments as information structures, designed to accommodate the presentation and the peer-to-peer exchange of design information for relatively large groups of between 60 and 150 participants. Using the database records to reconstruct the processes, three different quantitative analyses are described.Their results indicate that for these projects the web-environments were successful in enhancing peer-to-peer learning and that they promoted a more objective assessment of the submitted works. The study also looks at the effect that the environments themselves had on the process. Finally it draws some conclusions about these environments' information architecture: it presents tentative guidelines about how such environments must be designed to handle the dynamic display of design data, from many different authors, in a way that is transparent to the users.
series	journal
email
more	http://www.multi-science.co.uk/ijac.htm
last changed	2007/03/04 07:08

_id	cf2011_p157
id	cf2011_p157
authors	Boton, Conrad; Kubicki Sylvain, Halin Gilles
year	2011
title	Understanding Pre-Construction Simulation Activities to Adapt Visualization in 4D CAD Collaborative Tools
source	Computer Aided Architectural Design Futures 2011 [Proceedings of the 14th International Conference on Computer Aided Architectural Design Futures / ISBN 9782874561429] Liege (Belgium) 4-8 July 2011, pp. 477-492.
summary	Increasing productivity and efficiency is an important issue in the AEC field. This area is mainly characterized by fragmentation, heterogeneous teams with low lifetimes and many uncertainties. 4D CAD is one of the greatest innovations in recent years. It consists in linking a 3D model of the building with the works planning in order to simulate the construction evolution over time. 4D CAD can fill several needs from design to project management through constructivity analysis and tasks planning (Tommelein 2003). The literature shows that several applications have been proposed to improve the 4D CAD use (Chau et al. 2004; Lu et al. 2007; Seok & al. 2009). In addition, studies have shown the real impact of 4D CAD use in construction projects (Staub-French & Khanzode 2007; Dawood & Sika 2007). More recently, Mahalingam et al. (2010) showed that the collaborative use of 4D CAD is particularly useful during the pre-construction phase for comparing the constructability of working methods, for visually identifying conflicts and clashes (overlaps), and as visual tool for practitioners to discuss and to plan project progress. So the advantage of the 4D CAD collaborative use is demonstrated. Moreover, several studies have been conducted both in the scientific community and in the industrial world to improve it (Zhou et al. 2009; Kang et al. 2007). But an important need that remains in collaborative 4D CAD use in construction projects is about the adaptation of visualization to the users business needs. Indeed, construction projects have very specific characteristics (fragmentation, variable team, different roles from one project to another). Moreover, in the AEC field several visualization techniques can represent the same concept and actors choose one or another of these techniques according to their specific needs related to the task they have to perform. For example, the tasks planning may be represented by a Gantt chart or by a PERT network and the building elements can be depicted with a 3D model or a 2D plan. The classical view (3D + Gantt) proposed to all practitioners in the available 4D tools seems therefore not suiting the needs of all. So, our research is based on the hypothesis that adapting the visualization to individual business needs could significantly improve the collaboration. This work relies on previous ones and aim to develop a method 1) to choose the best suited views for performed tasks and 2) to compose adapted multiple views for each actor, that we call ‚Äúbusiness views‚Äù. We propose a 4 steps-method to compose business views. The first step identifies the users‚Äô business needs, defining the individual practices performed by each actor, identifying his business tasks and his information needs. The second step identifies the visualization needs related to the identified business needs. For this purpose, the user‚Äôs interactions and visualization tasks are described. This enables choosing the most appropriate visualization techniques for each need (step 3). At this step, it is important to describe the visualization techniques and to be able to compare them. Therefore, we proposed a business view metamodel. The final step (step 4) selects the adapted views, defines the coordination mechanisms and the interaction principles in order to compose coordinated visualizations. A final step consists in a validation work to ensure that the composed views really match to the described business needs. This paper presents the latest version of the method and especially presents our latest works about its first and second steps. These include making more generic the business tasks description in order to be applicable within most of construction projects and enabling to make correspondence with visualization tasks.
keywords	Pre-construction, Simulation, 4D CAD, Collaboration, Computer Supported Cooperative Work, Human-Computer Interface, Information visualization, Business view, Model driven engineering
series	CAAD Futures
email
last changed	2012/02/11 19:21

_id	6915
authors	Dorninger, Peter
year	2003
title	XML Technologies and Geodata
source	CORP 2003, Vienna University of Technology, 25.2.-28.2.2003 [Proceedings on CD-Rom]
summary	Photogrammetry and Remote Sensing are very important methods for acquisition of geodata. During the previous decade, severalrevolutionary changes occurred in this area. Until the appearance of automated image analysis tools, it was necessary to measureselected points in the images given. At that time, it was much faster and even cheaper to get images of real world objects compared tothe time and money consuming process of manual analyses. So one tried to minimize this effort by measuring only characteristicpoints such as edges, break-lines, peaks and valleys and, for sure, a grid with a given grid step which was selected to meet the efforts.Lots of information in the images was neglected.Digital point matching algorithms and airborne laser scanning provide many new possibilities. The only restriction on spatialresolution is the one of the used sensors. Given a more precise image sensor, the matching algorithm will be able to match moresurface points; given a higher frequency laser scanner, more points can be measured of the same area. And those sensors get moreand more precise every day. Besides, those techniques allow for fast repetition which is necessary to create time series as a basis for4D modeling! However, this fact is accompanied by several problems concerning the capability of available computers. Some years ago, as the first ideas of 3D city models arose, it was very difficult to acquire the necessary data. Today the new sensors and methods have thenecessary capability, but we are not able to handle the available datasets efficiently, because of shortcomings in the past. In a time ofworld wide data exchange through the internet and global datasets, it is necessary to have efficient methods and algorithms tomanage the available data. There is a need for international, vendor independent data exchange and management standards that haveto be accepted and supported by the industry. This article is going to present several methods of data encoding using standardized data formats based on eXtensible Markup Language (XML). After an introduction to this kind of data encoding, two derived applications for management, storage and presentation of geodata are described. As XML data is written in text format, the datasets have the ability to become rather long.Therefore some promising methods to reduce the amount of data are introduced afterwards. XML documents are mainly used fordata exchange between databases. Therefore the capabilities of commonly used database systems for storage of geodata are describedin the end and current implementation results of the Institute of Photogrammetry and Remote Sensing (I.P.F.) are presented.
series	other
email
last changed	2003/03/11 20:39

_id	ijac20031308
id	ijac20031308
authors	Garcia Alvarado, Rodrigo; Baesler Abufarde, Felipe; Moreno, Pedro Rodriguez; Bravo, Mauricio Pezo
year	2003
title	Modeling of Activities: an approach to the virtual representation of human behaviors in architectural spaces tested in emergency units
source	International Journal of Architectural Computing vol. 1 - no. 3
summary	Despite the increasing interest in the functionality and humanization of architecture, there are few studies covering the occupation of buildings and methods to represent activities in spaces. This article explores new software for simulating and virtual modeling in order to facilitate the analysis and visualization of events in buildings. Of particular importance is programming the behavior of 3D-characters according to the probabilistic evolution of activities, and producing animations and interactive models. This approach was tested in a study of three emergency units of hospitals in Chile. Although a full integration of software was not possible, the process developed (in particular the subjective tours) demonstrated that the technique can provide new information about the functioning and spatiality of the units. In addition, it suggested operative and architectural improvements supporting the management and design of facilities.
series	journal
more	http://www.multi-science.co.uk/ijac.htm
last changed	2007/03/04 07:08

_id	ecaade03_449_44_ireland
id	ecaade03_449_44_ireland
authors	Ireland, Tim and Derix, Christian
year	2003
title	An analysis of the Poly-dimensionality of living - An experiment in the application of 3-dimensional self-organising maps to evolve form
doi	https://doi.org/10.52842/conf.ecaade.2003.449
source	Digital Design [21th eCAADe Conference Proceedings / ISBN 0-9541183-1-6] Graz (Austria) 17-20 September 2003, pp. 449-456
summary	The architect and sculptor Fredrick Kiesler opposed the linear mechanics of modernity. As so efficiently defined in Margarette Shutte Lihotsky’s Frankfurt kitchen, his work expressed the ‘act of body motion’, in the view that people inhabit buildings in a dynamic and vicissitudinous way. Representative of a world essentially understood to be deterministic and ordered, the Frankfurt Kitchen encapsulated the dweller in a standardised, industrial environment. Opposed to the scientific ordering of task management, Kiesler argued that the linearly devised two-dimensional methodology of architectural design is out of context with the dynamic of living and developed his ideas in the endless house; a form in which its inhabitants could live in a poly-dimensional way. This work focuses on the development of a design process, which may reflect the character and sinuous properties of an individual’s pattern of living. The study will develop a process, investigating the application of self-organising maps as a tool for the definition of space, towards a result which is emergent. The parameters that define an individual’s pattern of living, will be instigated in an array of three-dimensional self-organising activity maps, towards the development of form.""
keywords	‘self-organising maps’, pattern, forming, emergent, dwelling
series	eCAADe
email
more	http://www.uel.ac.uk/ceca.uel.ac.uk
last changed	2022/06/07 07:50

_id	64c0
id	64c0
authors	Pektas, S T
year	2003
title	A FRAMEWORK FOR BUILDING DESIGN PROCESS MODELING WITH PARAMETER-BASED DESIGN STRUCTURE MATRICES
source	In C. J. Anumba (Ed.), Innovative Developments in Architecture, Engineering, and Construction. (pp. 25-31). Rotterdam: MillPress
summary	Architecture/Engineering/Construction (AEC) industry is one of the multidisciplinary domains in which collaboration among related parties is utmost important. While the knowledge needed for building processes are distributed among the different participants from diverse disciplinary backgrounds, the product of their activities, i.e. the building itself, must be highly integrated. Despite the intense flow of information between design professionals, there is a lack of research to better understand and manipulate these flows. Furthermore, most of the current process modeling tools in the AEC industry do not enable analyses of iteration in the process and they represent the process at high levels with very little information at lower levels. In order to resolve the issues mentioned above, this paper introduces the use of parameter-based dependency structure matrix as a process modeling and system analysis tool for building design. The method reveals insights into the process structure, optimum sequence of parameter decisions, iterative cycles and concurrency in the process. A knowledge management framework for parameter-based DSM applications is proposed and the application of the framework is demonstrated through a real life building design problem.
keywords	Design Integration, Design Process Modeling, Information Flow, and Parameter-based Dependency Structure Matrix
series	other
type	normal paper
email
last changed	2005/12/01 15:52

_id	cf2003_m_002
id	cf2003_m_002
authors	STOUFFS, Rudi and CUMMING, Michael
year	2003
title	Querying Design Information through Visual Manipulation of Representational Structures
source	Digital Design - Research and Practice [Proceedings of the 10th International Conference on Computer Aided Architectural Design Futures / ISBN 1-4020-1210-1] Tainan (Taiwan) 13–15 October 2003, pp. 41-52
summary	Querying design information is an intricate aspect of the design process. Supporting arbitrary design queries requires both flexible design information models that can be modified and geared to the kind of question, and access to information in a uniform and consistent manner. We report on an active research effort to provide a 3D graphical interface for the manipulation of representational and data structures in terms of composition and scope. It is based on a framework for representational flexibility that supports the development of query languages. Specifically, we consider this as a framework for data management and include data functions as a means to support data analysis. We emphasise the interaction mechanisms that support both data management and analysis. In particular, we distinguish three types of interaction: the selection of an entity of primary interest, the selection of an extent of interest, and the insertion of data functions as a means for data analysis.
keywords	visualisation, design information, design queries, representation
series	CAAD Futures
email
last changed	2003/09/22 12:21

_id	acadia03_014
id	acadia03_014
authors	Woo, J.-H., Clayton, M., Johnson, R. and Flores, B.
year	2003
title	Case Study of Tacit Knowledge Sharing in a Distributed Design Studio
doi	https://doi.org/10.52842/conf.acadia.2003.107
source	Connecting >> Crossroads of Digital Discourse [Proceedings of the 2003 Annual Conference of the Association for Computer Aided Design In Architecture / ISBN 1-880250-12-8] Indianapolis (Indiana) 24-27 October 2003, pp. 107-116
summary	This paper demonstrates the effects of experts’ tacit knowledge on improving architectural students’ design artifacts in a distributed design studio. In geographically distributed design environments, the Internet is an important medium by which architects can share tacit knowledge in the form of dialogue via online communication technologies, such as online chat and Instant Messaging (IM). In spring 2003, the National Aeronautics and Space Administration (NASA) and 8 schools conducted a collaborative design studio to develop a crew restraint system for space flights. Online chat software was used as a primary communication channel. Throughout the entire design studio, NASA professionals served as knowledge holders while undergraduate students participated as knowledge seekers. An interpretive content analysis and case study methodology were used in this study. We qualitatively observed the interactions between NASA and the students based upon two aspects: knowledge reflection and design improvement. Data were collected using document analysis of all knowledge sources and students’ design artifacts. The findings of this study indicate that the online chat system is useful in sharing tacit knowledge for the early part of design processes in a distributed design environment. Experts’ tacit knowledge appears to not only influence how students understand problems, but how they initiate conceptual design. This study provides empirical evidence regarding tacit knowledge sharing, and strengthens Schon’s (1983) claim about knowledge reflection in design studio. Furthermore, this study introduces architectural practitioners to the practical necessity of tacit knowledge sharing. This study is significant because its findings indicate the appropriate knowledge management strategy for architectural practitioners.
series	ACADIA
email
last changed	2022/06/07 07:57

_id	avocaad_2003_14
id	avocaad_2003_14
authors	Yolanda Steijns and Alexander Koutamanis
year	2003
title	Information systems for the design and management of transformation in Dutch educational buildings
source	LOCAL VALUES in a NETWORKED DESIGN WORLD - ADDED VALUE OF COMPUTER AIDED ARCHITECTURAL DESIGN, Stellingwerff, Martijn and Verbeke, Johan (Eds.), (2004) DUP Science - Delft University Press, ISBN 90-407-2507-1.
summary	Following a period of little change, new didactic approaches coupled to social and technological developments have recently triggered several fundamental modifications in Dutch secondary education. These modifications have extensive consequences for the accommodation of secondary education. The majority of existing buildings is quite conventional in spatial terms and is characterized by limited flexibility and transformability. The paper is a description of a modular yet coherent information system that supports decision taking concerning the transformation of existing buildings. The system consists of spatial and topological representation of a building and its brief, as well as a matching system that connects the two.The purpose of the system is to support the management of the building transformation by providing appropriate input to design and decision activities, as well as by accommodating their output. This is achieved by providing a responsive context for the analysis and evaluation of design decisions from the major viewpoints and with respect to primary aspects. Continuity is a major consideration in this context: appropriate information and feedback should be available throughout the design and construction process but also after completion (in anticipation of further transformations, as well as for monitoring building performance).
keywords	Architecture, Local values, Globalisation, Computer Aided Architectural Design
series	AVOCAAD
email
last changed	2006/01/16 21:38

_id	eaea2005_151
id	eaea2005_151
authors	Ohno, Ruyzo
year	2006
title	Seat preference in public squares and distribution of the surrounding people: An examination of the validity of using visual simulation
source	Motion, E-Motion and Urban Space [Proceedings of the 7th European Architectural Endoscopy Association Conference / ISBN-10: 3-00-019070-8 - ISBN-13: 978-3-00-019070-4], pp. 151-163
summary	Public squares are shared by people who use them for various purposes. When people choose seats in a square, they unconsciously evaluate not only the physical characteristics of the space but also the distribution of others already present (Hall, 1966; Sommer, 1969; Whyte, 1988). Knowing the hidden rules of this behaviour will be important in designing squares that remain comfortable even in crowded situations. Most past studies of seat choice preference have reported on statistical tendencies derived from observations of subject behavior in actually existing sites (i.e., Abe, 1997; Imai, 1999; Kawamoto, 2003). However, they provide no clear theoretical model for explaining the basic mechanisms regulating such behaviour. The present study conducts a series of experiments in both real and virtual settings in order to extract quantitative relationships between subjects’ seat preferences and the presence of nearby strangers and to clarify what factors influence their seat choices.
series	EAEA
type	normal paper
email
more	http://info.tuwien.ac.at/eaea
last changed	2008/04/29 20:46

_id	sigradi2003_020
id	sigradi2003_020
authors	Abarca, R., Díaz, S. and Moreno, S.
year	2003
title	Desarrollo de material informatico-educativo para la enseñanza de la geometría a estudiantes de diseño (Development of IT-based educational material for the teaching of geometry to students of design)
source	SIGraDi 2003 - [Proceedings of the 7th Iberoamerican Congress of Digital Graphics] Rosario Argentina 5-7 november 2003
summary	This paper is born as an answer to the meaningful learning difficulties and academic performance in Spatial and Flat Geometry course on second year Design School at Universidad de las Americas University, Santiago de Chile. The problem is faced from the potentiality that digital environment gives us in representation, display options, shape and projection testing, analysis and non visual accounts to teach flat and spatial geometry within the receptors' codes and coherent with designer's own language.
series	SIGRADI
email
last changed	2016/03/10 09:47

_id	sigradi2003_121
id	sigradi2003_121
authors	Alvarado, Rodrigo García, Castillo, Gino Alvarez
year	2003
title	Técnicas Cinematográficas para las Animaciones Arquitectónicas (Film-making techniques for Architectural Animations)
source	SIGraDi 2003 - [Proceedings of the 7th Iberoamerican Congress of Digital Graphics] Rosario Argentina 5-7 november 2003
summary	The paper presents film techniques for the expressive development of architectural animations, based on a graphic analysis of productions related to architecture (famous movies, documentaries of buildings and contemporary animations). This study is revealing some cinematographic concepts such as the dynamic composition of image, diversity of camera's positions, control of movements and rhythmic montage of shots that support a meaningful presentation of buildings. Also it suggests the geometric programming of movements and influences in the architectural design.
keywords	Animation, Cinematography, Movement
series	SIGRADI
email
last changed	2016/03/10 09:47

_id	sigradi2003_005
id	sigradi2003_005
authors	Barros, D.R., Mandagarán, M., Susta, C. and Nigro, P.
year	2003
title	Hipermedios y no linealidad (Hypermedia and non-linearity)
source	SIGraDi 2003 - [Proceedings of the 7th Iberoamerican Congress of Digital Graphics] Rosario Argentina 5-7 november 2003
summary	The following is the preliminary presentation of a study being carried out at the CEAC FAUD UNMdP Center, registered within the research project 15/B101, on hypermedia readings of urban fragments by non-expert users. This work aims at contributing to the definition of an analysis methodology applicable to hypermedia, Web site and CD rom, about design and architecture topics. It is based on the model of analysis by Aarseth, enlarged for hypermedia. Its purpose is to recognize and describe the features, recurrencies, saturations and differences which characterize them.
keywords	Hypermedia, design, analysis methodology
series	SIGRADI
email
last changed	2016/03/10 09:47

_id	sigradi2003_004
id	sigradi2003_004
authors	Barros, Diana Rodríguez
year	2003
title	Hipermedios, metanodos y lógicas de cierre (Hypermedia, metanodes and logic of closure)
source	SIGraDi 2003 - [Proceedings of the 7th Iberoamerican Congress of Digital Graphics] Rosario Argentina 5-7 november 2003
summary	The present work is a contribution for the construction of a theorical perspective on the presence of metanodes and closing strategies in hypermedia readings about architecture and design. It particularly aims at describing, explaining and predicting these phenomena in relation to the positive attitudes they generate in processess of meaning construction and cognitive overflow. The results obtained are expected to help in producing guidelines and implications to be considered when systematizing the analysis and design of hypermedia on architecture and the city. It is part of the studies being currently carried out at the CEAC Center about hypermedia readings of urban fragments by non-expert users. (Project 15/B1001)
keywords	Hypermedia, design, metanodes, closing strategies
series	SIGRADI
email
last changed	2016/03/10 09:47

_id	sigradi2008_049
id	sigradi2008_049
authors	Benamy, Turkienicz ; Beck Mateus, Mayer Rosirene
year	2008
title	Computing And Manipulation In Design - A Pedagogical Experience Using Symmetry
source	SIGraDi 2008 - [Proceedings of the 12th Iberoamerican Congress of Digital Graphics] La Habana - Cuba 1-5 December 2008
summary	The concept of symmetry has been usually restricted to bilateral symmetry, though in an extended sense it refers to any isometric transformation that maintains a certain shape invariant. Groups of operations such as translation, rotation, reflection and combinations of these originate patterns classified by modern mathematics as point groups, friezes and wallpapers (March and Steadman, 1974). This extended notion represents a tool for the recognition and reproduction of patterns, a primal aspect of the perception, comprehension and description of everything that we see. Another aspect of this process is the perception of shapes, primary and emergent. Primary shapes are the ones explicitly represented and emergent shapes are the ones implicit in the others (Gero and Yan, 1994). Some groups of shapes known as Semantic Shapes are especially meaningful in architecture, expressing visual features so as symmetry, rhythm, movement and balance. The extended understanding of the concept of symmetry might improve the development of cognitive abilities concerning the creation, recognition and meaning of forms and shapes, aspects of visual reasoning involved in the design process. This paper discusses the development of a pedagogical experience concerned with the application of the concept of symmetry in the creative generation of forms using computational tools and manipulation. The experience has been carried out since 1995 with 3rd year architectural design students. For the exploration of compositions based on symmetry operations with computational support we followed a method developed by Celani (2003) comprising the automatic generation and update of symmetry patterns using AutoCAD. The exercises with computational support were combined with other different exercises in each semester. The first approach combined the creation of two-dimensional patterns to their application and to their modeling into three-dimensions. The second approach combined the work with computational support with work with physical models and mirrors and the analysis of the created patterns. And the third approach combined the computational tasks with work with two-dimensional physical shapes and mirrors. The student’s work was analyzed under aspects such as Discretion/ Continuity –the creation of isolated groups of shapes or continuous overlapped patterns; Generation of Meta-Shapes –the emergence of new shapes from the geometrical relation between the generative shape and the structure of the symmetrical arrangement; Modes of Representation –the visual aspects of the generative shape such as color and shading; Visual Reasoning –the derivation of 3D compositions from 2D patterns by their progressive analysis and recognition; Conscious Interaction –the simultaneous creation and analysis of symmetry compositions, whether with computational support or with physical shapes and mirrors. The combined work with computational support and with physical models and mirrors enhanced the students understanding on the extended concept of symmetry. The conscious creation and analysis of the patterns also stimulated the student’s understanding over the different semantic possibilities involved in the exploration of forms and shapes in two or three dimensions. The method allowed the development of both syntactic and semantic aspects of visual reasoning, enhancing the students’ visual repertoire. This constitutes an important strategy in the building of the cognitive abilities used in the architectural design process.
keywords	Symmetry, Cognition, Computing, Visual reasoning, Design teaching
series	SIGRADI
email
last changed	2016/03/10 09:47

_id	ijac20031107
id	ijac20031107
authors	Berridge, Philip; Koch, Volker; Brown, Andre G.P.
year	2003
title	Information Spaces for Mobile City Access
source	International Journal of Architectural Computing vol. 1 - no. 1
summary	This paper describes two complementary European research projects that share common interests and goals.The work described is intended to facilitate city analysis and support decision-making. The first project focuses on the distribution, access and ease of use of city data. The system allows access to historical data concerning key buildings in Liverpool, England, via a suite of web-based tools and a palmtop device. The second project looks at extending the functionality of traditional computer aided design (CAD) software to enable geometric and semantic data to be combined within a single environment. The system allows those involved in city planning to better understand the past and present development pattern of an area so that their decisions on future proposals are better informed.The paper concludes by describing a system that integrates particular aspects of the two projects, and the potential that this integration can bring.This new work provides mobile access to historical city development data, current city information and tools to support urban project development.
series	journal
more	http://www.multi-science.co.uk/ijac.htm
last changed	2007/03/04 07:08

_id	792a
authors	Blaschke, Thomas and Tiede, Dirk
year	2003
title	Bridging GIS-based landscape analysis/modelling and 3D-simulation.Is this already 4D?
source	CORP 2003, Vienna University of Technology, 25.2.-28.2.2003 [Proceedings on CD-Rom]
summary	Several studies have used remote sensing to map patterns of e.g. deforestation or to analyse the rates of land use change. Thesestudies have proven useful for interpreting the causes of urbanization, deforestation etc. and the impact of such changes on theregion. Monitoring of change (e.g. deforestation or reforestation) is frequently perceived as one of the most important contributionsof remote sensing technology to the study of global ecological and environmental change (Roughgarden et al. 1991). Manyresearchers believe that the integration of remote sensing techniques within analysis of environmental change is essential if ecologistsare to meet the challenges of the future, specifically issues relating to global change; however, in practice, this integration has so farbeen limited (Griffiths & Mather 2000). Considerable difficulties are encountered in linking, on the one hand, the biologies oforganisms and the ecologies of populations to the fluxes of material and energy quantifiable at the level of ecosystems. In this paper,we concentrate on the methodological aspects of the delineation of landscape objects and touch the ecological application onlysuperficially but we elucidate the potential of the proposed methodology for several ecological applications briefly.
series	other
email
last changed	2003/11/21 15:16

_id	caadria2003_b1-2
id	caadria2003_b1-2
authors	Chakraborty, Somen
year	2003
title	Automated Generation of Residential Roomlayout within a Constrained Covered Area
doi	https://doi.org/10.52842/conf.caadria.2003.085
source	CAADRIA 2003 [Proceedings of the 8th International Conference on Computer Aided Architectural Design Research in Asia / ISBN 974-9584-13-9] Bangkok Thailand 18-20 October 2003, pp. 85-100
summary	A significant quantum of all buildings constructed in modern times is designed for residential purpose. A tremendous amount of money is being spent every year for construction of residential buildings. Therefore, optimization of design becomes very important. In a country like India most people in urban area live in houses having constrained area. A significant part of residential units comes under mass housing either as high-rise building blocks or as plotted developments. In any of such schemes there are large number of housing units for a group of families of whom general characteristics are known but characteristics of individual families are not known at the time of designing. This situation is, however, suitable for scientific investigation and analysis based on statistical surveys. Broadly speaking, this paper suggests approach to deal with this situation of finding optimum layout of rooms of a housing unit for any target group of families when the covered area is so constrained that freedom of using different criteria like aesthetics, structural systems, materials and methods of construction in varieties of ways is drastically reduced. In such constrained area for housing units rooms are generally found rectangular within overall rectangular outline of each unit. Method shown here is valid under this restriction. It is also assumed that number of rooms will be restricted to such number that exhaustive search for design is practically possible within a reasonable time with present day capabilities of normally available PCs.
series	CAADRIA
email
last changed	2022/06/07 07:55

For more results click below: