Cumincad : CUMINCAD Papers : Search Results

CumInCAD is a Cumulative Index about publications in Computer Aided Architectural Design
supported by the sibling associations ACADIA, CAADRIA, eCAADe, SIGraDi, ASCAAD and CAAD futures

PDF papers
References

Hits 1 to 20 of 602

Reformat results as: short short into frame detailed detailed into frame

_id	ecaadesigradi2019_370
id	ecaadesigradi2019_370
authors	Sperling, David, Vizioli, Simone Helena Tanoue, Botasso, Gabriel Braulio, Tiberti, Mateus Segnini, Santana, Eduardo Felipe Zambom and Sígolo, Brianda de Oliveira Ordonho
year	2019
title	Crossing Timelines - Main research topics in the histories of eCAADe and SIGraDi
doi	https://doi.org/10.52842/conf.ecaade.2019.1.407
source	Sousa, JP, Xavier, JP and Castro Henriques, G (eds.), Architecture in the Age of the 4th Industrial Revolution - Proceedings of the 37th eCAADe and 23rd SIGraDi Conference - Volume 1, University of Porto, Porto, Portugal, 11-13 September 2019, pp. 407-416
summary	Being in tune with the joint eCAADe and SIGraDi conference, this paper systematizes and analyzes data related to the set of papers presented in the history of the conferences of both societies. Which paths traced from eCAADe and SIGraDi brought us to the "architecture in the age of the fourth industrial revolution"? This paper describes a bibliometric study focused on eCCADe and SIGraDi papers from 2003 to 2018 retrieved from CumInCad by using an open source software developed by the team for this research. The most used keywords and most cited authors, cross-citations between societies and time series about this data were synthesized, recovering part of the histories of these societies. Some similarities and differences between them are pointed out allowing to understand their past for better drawing their future.
keywords	CAAD; History; Bibliometrics; Cumincad; eCAADe; SIGraDi
series	eCAADeSIGraDi
email
last changed	2022/06/07 07:56

_id	c35c
authors	Bender, Oliver
year	2003
title	The Geographical Alpine Information System “Galpis” in the Raumalp Project. Outlay and Output
source	CORP 2003, Vienna University of Technology, 25.2.-28.2.2003 [Proceedings on CD-Rom]
summary	RAUMALP, an interdisciplinary research project of the Austrian Academy of Sciences, shall examine problem areas of spatial development on community level in the Austrian alpine region. The aim is the investigation of scientific basics for political decision finding, especially for the regional-specific realisation of the Alpine Convention. All ascertained information shall be included in “GALPIS”, a comprehensive Alpine Space Information System. GALPIS based on ESRI ArcGIS and MS Access software works with data from different sources, like ISIS, the electronic data base of Statistic Austria, and original data and maps gathered and elaborated by the working groups of RAUMALP. This also includes ecological raster data. Dealing with administrative units, „real“ space and raster space, RAUMALP will integrate the different space levels mostly to administrative spatial units representing the existing 1145 communities of the RAUMALP study area. This will be realised by overlay of grids, types of land use and communitypolygons. Major task of GALPIS is a conversion of former communal data (p. e. 1451 communities in 1951) that should represent the recent administrative boundaries. By this way it is possible to make thematic and time-integrative analyses of community data. GIS modelling of the six case studies is more complex. The conceptual model has to integrate several vector and raster layers such as land plots (“Digitale Katastralmappe”), types of land use (“Land Use and Land Cover Austria” by M. Seger) and biodiversity. P. e., the working group settlement is using a logical data model based on the entity “building” with the attributes “construction”,“function”, etc.
series	other
email
last changed	2003/11/21 15:16

_id	caadria2003_c3-3
id	caadria2003_c3-3
authors	Lin, Meng-Yian and Kang, Jian
year	2003
title	Adding Instant Acoustic Response to Caad Animation: A Feasibility Study
doi	https://doi.org/10.52842/conf.caadria.2003.475
source	CAADRIA 2003 [Proceedings of the 8th International Conference on Computer Aided Architectural Design Research in Asia / ISBN 974-9584-13-9] Bangkok Thailand 18-20 October 2003, pp. 475-486
summary	Although in recent years presentation using CAAD animation has played an important role in architectural design, it is still weak in terms of acoustic environment simulation. Current acoustic simulation software are mainly for accurately calculating various acoustic indices and the calculation is normally not real-time. This research is therefore to explore the possibilities of adding instant acoustic responses to presentations using CAAD animation.
series	CAADRIA
email
last changed	2022/06/07 07:59

_id	ecaade03_217_35_peng
id	ecaade03_217_35_peng
authors	Peng, Chengzhi
year	2003
title	Visualising City in Change with the MEDIUM Platform
doi	https://doi.org/10.52842/conf.ecaade.2003.217
source	Digital Design [21th eCAADe Conference Proceedings / ISBN 0-9541183-1-6] Graz (Austria) 17-20 September 2003, pp. 217-224
summary	Work on a methodology that attempts to deliver a dynamic urban information system for visualising city in change is presented. We have developed a Multi-tier Extensible platform for Dynamic and Interactive Urban Modelling (MEDIUM) in connection with a large-scale historical urban study programme that investigates the history of the City of Sheffield. The MEDIUM platform shows some new properties that could address the limitations observed in conventional static urban modelling. We consider that 3D virtual city models can be created along a chronological axis and the time dimension of each model segment can be registered in such a way that the 3D models of different times can be brought together under a unifying visualisation platform. This will allow a visual understanding of how a city may have evolved to develop. To date, we have applied the MEDIUM platform to real city datasets and produced examples that allow us to examine what effects of urban visualisation could be achieved through the dynamic user-centred approach.
keywords	Dynamic urban modelling; virtual city; urban study, VRML; Web.
series	eCAADe
email
more	http://sucod.shef.ac.uk
last changed	2022/06/07 07:59

_id	b1f3
id	b1f3
authors	Rafi A, Karboulonis P, Fazidin J, Badrolhisham H
year	2003
title	Virtual environments in architecture and planning design: 4 possible approaches
source	International Journal of Design Computing
summary	Advancements in information retrieval (IR), local and wide area networks (LAN, WAN) and the Internet, human-computer interaction (HCI), and virtual reality (VR) technologies have enabled the emergence and availability of affordable real-time computer data visualisation and manipulation systems that can be deployed and interfaced to most Computer Aided Design (CAD) software systems. However, the rapid advancement and adoption of information visualisation in different areas is currently challenging VR system designers to formulate and deploy strategies and tools to effectively visualise, navigate and effectively communicate various types of information within a virtual environment (VE). A further problem relates to the fact that even within a single area or application the requirements are still diverse to the extent that different approaches and technologies still need to be employed before a satisfactory solution is reached. This paper presents four possible approaches in identifying and designing effective VR systems for architecture and planning design to allow the user to effectively communicate and share their experiences and ideas in a collaborative manner. It is also proposed that VEs should look beyond plain representations and reproductions of the real world environments that they portray and bear higher interpretation and expression values. The value of eliciting structuring and interfacing information and knowledge to a VE is also highlighted, as is the need for efficient database systems and CAD systems capable of exchanging information and data with VEs. Current efforts in prolonging the lifetime of VEs are being examined through four case studies that highlight the ever-escalating requirements that currently face VR researchers.
keywords	Virtual Reality, Virtual Environment, Collaborative Design
series	journal paper
type	normal paper
email
more	http://wwwfaculty.arch.usyd.edu.au/kcdc/ijdc/vol05/papers/rafiFrameset.htm
last changed	2006/09/29 03:05

_id	acadia03_050
id	acadia03_050
authors	Schubert, Frieder and Lurz, Philipp (et al.)
year	2003
title	Physical Simulation in a VR Tool for Urban Design
doi	https://doi.org/10.52842/conf.acadia.2003.395
source	Connecting >> Crossroads of Digital Discourse [Proceedings of the 2003 Annual Conference of the Association for Computer Aided Design In Architecture / ISBN 1-880250-12-8] Indianapolis (Indiana) 24-27 October 2003, pp. 395-401
summary	Physical influences on a city, such as noise, light, air flow, and solar energy quantities, can already be simulated on computers; however, these simulations are usually not embedded into the urban planning process. Regarding a broad field of these influences and their correlations will improve the quality of the design. The use of simulations in the sketching stage provides the possibility of reacting accordingly for the urban planner, which is essential for sustainable design. This paper describes the development of a virtual reality tool for the early urban design process, in which we realized a network connection between a software package calculating noise propagation in urban spaces and a virtual reality design environment. In this dynamic VR design tool, it is possible to experiment with simple geometric forms and objects (these objects can be added to constructions, removed, and transformed). Interactively, with each action of the planner, simulations are generated and visualized in the VR environment in real-time. The last part of the paper describes our concept, how this VR design tool should be integrated in the study of urban planning, and how we want the students to get a sense for the impact of their design on physical phenomena in an urban scale.
series	ACADIA
email
last changed	2022/06/07 07:57

_id	7655
authors	Okeil, Ahmad and El Araby, Mostafa
year	2003
title	Realism vs. Reality in Digital Reconstruction of Cities
source	CORP 2003, Vienna University of Technology, 25.2.-28.2.2003 [Proceedings on CD-Rom]
summary	The digital reconstruction of existing cities using virtual reality techniques is being increasingly used. For consultants, municipalities and planning departments these models provide decision support through visual simulations (El Araby, 2001). For academia they provide a new tool for teaching students urban design and planning (Okeil, 2001). For authorities they provide a tool for promoting the city on the world wide web trying to attract more businesses and tourists to it. The built environment is very rich in detail. It does not only consist of open spaces surrounded by abstract buildings but it also includes many smaller objects such as street furniture, traffic signs, street lights, different types of vegetation and shop signs for example. All surfaces in the built environment have unique properties describing color, texture and opacity. The built environmentis dynamic and our perception is affected by factors such as pedestrian movement, traffic, environmental factors such as wind, noise and shadows. The built environment is also shaped by the accumulation of changes caused by many influences through time. All these factors make the reconstruction of the built environment a very complex task. This paper tries to answer the question: how realistic the reconstructed models of urban areas can be. It sees “Realism“ as a variable floating between three types of realties. The reality of the physical environment which we are trying to represent. The reality of the digital environment which will host the digitally reconstructed city. And the reality of the working environment which deals with the problem of limitation of resources needed to digitally reconstruct the city. A case study of building a 3D computer model of an urban area in the United Arab Emirates demonstrates that new time-saving techniques for data acquisition can enhance realism by meetingbudget limitations and time limitations.
keywords	Virtual Reality; Photo Realism; Texture Maps; 3D Modeling; Urban Design
series	other
email
last changed	2003/03/11 20:39

_id	sigradi2003_076
id	sigradi2003_076
authors	Armesto, Tristán
year	2003
title	Producción Digital de un Auditorio (Digital Production of an Auditorium)
source	SIGraDi 2003 - [Proceedings of the 7th Iberoamerican Congress of Digital Graphics] Rosario Argentina 5-7 november 2003
summary	In the middle of the year 2001, we had the opportunity to project an Auditory in the particular building of our School of Architecture. The chance to produce the entire project an all the technical documentation was given; using only digital tools. The use of this tools let us to calculate illumination, isolation study, sound an thermical conditioning with a real time visualization of the three dimensional model.
series	SIGRADI
email
last changed	2016/03/10 09:47

_id	ecaade03_587_34_asanowicz
id	ecaade03_587_34_asanowicz
authors	Asanowicz, Alexander
year	2003
title	Architectural Composition in Digital Space
doi	https://doi.org/10.52842/conf.ecaade.2003.587
source	Digital Design [21th eCAADe Conference Proceedings / ISBN 0-9541183-1-6] Graz (Austria) 17-20 September 2003, pp. 587-590
summary	In this paper the possibilities of using the computers at course of architectural compositions are considered. As the start point of the new teaching method of architectural composition we used the course of tradition architectural composition, elaborated at our Faculty. The course of Digital Architectural Composition was finished in 2002. The main goal of using the new digital media for modelling architectural forms was checking the new possibilities of form creation. Traditionally, searching of forms at the conceptual design stage is performed by using sketches, drawings and physical models. Our new method showed that is possible to do the same thing using the computerbased 3D modelling, experiencing no physical limitations of the 'real' substance. At the same time, at the early design stages, when formal value is sought, computer modelling can be done almost intuitively. In ours work we try to find a creative way of using computer - transforming the tool into medium. The attention was paid on exploring the possibilities characteristic for computers and not available with traditional methods of modelling. Architect’s tradition tools are effectively replaced by a computer, which create a new way of doing things.
keywords	Architectural composition, computer modelling, method of teaching
series	eCAADe
email
last changed	2022/06/07 07:54

_id	c5c5
id	c5c5
authors	Calderon, C., Cavazza M. and Diaz, D.
year	2003
title	A NEW APPROACH TO VIRTUAL DESIGN FOR SPATIAL CONFIGURATION PROBLEMS,
source	7th IEEE International Information Visualisation Conference, London, UK, 16-17 July 2003. http://www.graphicslink.demon.co.uk/IV03/
summary	In this paper, we present a new framework for the use of Virtual Reality (VR) in engineering design for configuration applications. Traditional VR systems support the visual exploration of a design solution but do not assist the user in exploring alternative solutions based on domain knowledge. Extending previous work in the area of Intelligent Virtual Environment, we propose an intelligent configuration system based on constraint logic programming (CLP), integrated in a real-time 3D graphic environment. This type of integration facilitates the expression of design knowledge in the VE and enables the user to interactively solve and/or refine a spatial configuration problem. In the system described in this paper, the user can visually explore configurations, but his interaction with objects of the configuration problem triggers new cycles of constraint propagation from the modified configuration to produce a new compatible solution.
keywords	Virtual Reality, Virtual Design
series	other
type	normal paper
email
last changed	2005/12/02 11:31

_id	caadria2003_b4-2
id	caadria2003_b4-2
authors	Choi, Jin Won and Park, Jae Wan
year	2003
title	Developing a Building Design Compiler that Frequently evaluates Building Design Performance within the Design Process
doi	https://doi.org/10.52842/conf.caadria.2003.553
source	CAADRIA 2003 [Proceedings of the 8th International Conference on Computer Aided Architectural Design Research in Asia / ISBN 974-9584-13-9] Bangkok Thailand 18-20 October 2003, pp. 553-566
summary	This paper demonstrates an experience in the development of a design performance evaluation system that can frequently evaluate building design performance within the design process in a real-time manner. The evaluation system, that we call "design compiler," is composed of several modules such as a front-end component-based CAD engine, a knowledge base, and a set of design agents. The notion of the design compiler is quite similar to a compiler for computer programming such as a C compiler. While a computer programmer compiles a set of programming codes to check compiling errors during the implementation of a software system, an architectural designer can 'compile' his/her intermediate design product to evaluate design errors during the design process. The compilation can be done immediately at any level or any time during the design process in a real-time manner. We expect that this compiling process will dramatically increase design feedbacks, and thus result in a better design product. Further research issues that have been identified at the end of the research include increasing the modeling capability, extending to multi-story building representation, developing various design agents, exploring better ways to request and manage design knowledge, and supporting design collaboration.
series	CAADRIA
email
last changed	2022/06/07 07:56

_id	6915
authors	Dorninger, Peter
year	2003
title	XML Technologies and Geodata
source	CORP 2003, Vienna University of Technology, 25.2.-28.2.2003 [Proceedings on CD-Rom]
summary	Photogrammetry and Remote Sensing are very important methods for acquisition of geodata. During the previous decade, severalrevolutionary changes occurred in this area. Until the appearance of automated image analysis tools, it was necessary to measureselected points in the images given. At that time, it was much faster and even cheaper to get images of real world objects compared tothe time and money consuming process of manual analyses. So one tried to minimize this effort by measuring only characteristicpoints such as edges, break-lines, peaks and valleys and, for sure, a grid with a given grid step which was selected to meet the efforts.Lots of information in the images was neglected.Digital point matching algorithms and airborne laser scanning provide many new possibilities. The only restriction on spatialresolution is the one of the used sensors. Given a more precise image sensor, the matching algorithm will be able to match moresurface points; given a higher frequency laser scanner, more points can be measured of the same area. And those sensors get moreand more precise every day. Besides, those techniques allow for fast repetition which is necessary to create time series as a basis for4D modeling! However, this fact is accompanied by several problems concerning the capability of available computers. Some years ago, as the first ideas of 3D city models arose, it was very difficult to acquire the necessary data. Today the new sensors and methods have thenecessary capability, but we are not able to handle the available datasets efficiently, because of shortcomings in the past. In a time ofworld wide data exchange through the internet and global datasets, it is necessary to have efficient methods and algorithms tomanage the available data. There is a need for international, vendor independent data exchange and management standards that haveto be accepted and supported by the industry. This article is going to present several methods of data encoding using standardized data formats based on eXtensible Markup Language (XML). After an introduction to this kind of data encoding, two derived applications for management, storage and presentation of geodata are described. As XML data is written in text format, the datasets have the ability to become rather long.Therefore some promising methods to reduce the amount of data are introduced afterwards. XML documents are mainly used fordata exchange between databases. Therefore the capabilities of commonly used database systems for storage of geodata are describedin the end and current implementation results of the Institute of Photogrammetry and Remote Sensing (I.P.F.) are presented.
series	other
email
last changed	2003/03/11 20:39

_id	43f0
id	43f0
authors	Flynn, D., van Schaik, P., Blackman, T., Fencott, P.C., Hobbs, B., & Calderon, C.
year	2003
title	DEVELOPING A VIRTUAL REALITY-BASED METHODOLOGY FOR PEOPLE WITH DEMENTIA: A FEASIBILITY STUDY.
source	Journal of CyberPsychology and Behavior, Vol6, Number6, 2003.
summary	The aim of this study was to examine the feasibility of virtual reality (VR) technology for use by persons with dementia (PWD). Data were obtained directly from six PWD regarding their experiences with a virtual environment (VE) of a large outdoor park. A user-centered method was developed to assess: (a) presence; (b) user inputs; (c) display quality; (d) simulation fidelity; and (e) overall system usability. The extent to which PWD could perform four functional activities in the VE was also investigated (e.g., mailing a letter). In addition, physical and psychological well-being of PWD while interacting with the VE was assessed objectively by recording heart rate during the VR sessions and subjectively with discrete questionnaire items and real-time prompts. Symptom profiles associated with simulator sickness were assessed with an adapted version of the Simulator Sickness Questionnaire. The study found that PWD to some extent experienced presence; perceived that objects were realistic and moved naturally; generally felt in control of the interaction; and demonstrated little difficulty using a joystick for navigation. The study also demonstrated that VR is an appropriate medium for assessing functional behavior within the context of an ecologically valid VE. PWD did not experience any significant increase in symptoms associated with simulator sickness, or detriments to their psychological and physical well-being. These findings demonstrated that it is feasible to work in VEs with PWD.
keywords	Dementia, VR
series	journal paper
type	normal paper
email
last changed	2005/12/02 11:36

_id	caadria2003_c5-1
id	caadria2003_c5-1
authors	Hoon, M. , Jabi, W. and Goldman, G.
year	2003
title	Immersion, Interaction, and Collaboration In Architectural Design Using Gaming Engines
doi	https://doi.org/10.52842/conf.caadria.2003.721
source	CAADRIA 2003 [Proceedings of the 8th International Conference on Computer Aided Architectural Design Research in Asia / ISBN 974-9584-13-9] Bangkok Thailand 18-20 October 2003, pp. 721-738
summary	"This paper investigates the role of gaming engines in the architectural design process through the introduction of features such as immersion, interaction and collaboration. While traditional 3D modelling and visualization systems such as 3D Studio MAX and form?Z offer increasingly convincing visual simulations, gaming engines are approaching the visual realism of such systems and are offering additional interactive features that are usually available only in more expensive immersive virtual reality systems . Additionally, the capability to have multiple individuals inhabit and navigate the space offers unique opportunities for collaboration as well as the investigation of human behaviour. Participants with internet access can be invited to access a shared virtual environment. Collaboration among users can be further enhanced by combining immersive navigation with peer-to-peer instant messaging and/or adding a voice channel. This paper analyzes these issues through research summary and the creation and user testing of a prototype based on a publicly available gaming engine. Through a series of assignments within an academic course, students in the school of architecture were asked to iteratively use and test this prototype for the collaborative exploration of designed environments. Students made their environments available for others to navigate in real-time and offer comments. A final design review was conducted in which critics were asked to enter the designed environment, explore it at will and interact with the student as well as others present in the same virtual space. This paper will illustrate some of the student projects and describe the immersive,"
series	CAADRIA
email
last changed	2022/06/07 07:50

_id	acadia03_045
id	acadia03_045
authors	Hoon, Michael and Kehoe, Michael
year	2003
title	Enhancing Architectural Communication with Gaming Engines
doi	https://doi.org/10.52842/conf.acadia.2003.349
source	Connecting >> Crossroads of Digital Discourse [Proceedings of the 2003 Annual Conference of the Association for Computer Aided Design In Architecture / ISBN 1-880250-12-8] Indianapolis (Indiana) 24-27 October 2003, pp. 349-355
summary	This paper makes a case for exploring the feasibility of utilizing the advanced graphics and sound systems of contemporary gaming engines to promote architecturally relevant work. Gaming engines, while developed largely for the PC entertainment industry, have vast potential for application in architecture. This paper will explore the depth of this potential and will outline work demonstrating the advantages and the limitations of this technology. The supporting research and observations examine the technology and reveal its potential usefulness as an instructional or depictive authoring tool. Game engines were selected that had appropriate graphical prowess, but were customizable as to allow the removal of game-specific features (to create a “professional” user interface). Projects were authored that expressed complex building details using the engine for visual depiction. The details, which included constructional components, structural assemblies, or simple design nuances, were modeled with 3D geometry and realistically textured and lighted. The game engine allowed one user or many remote simultaneous users in the virtual environment to interactively explore the presentation in real time. Scripts were developed to encourage end-users to interactively disassemble or reassemble building components as desired. Audile and/or text-based information regarding the assembly sequence were provided by exploiting the game interface features. Furthermore, interactive object scaling was provided to facilitate analysis of component relationships.
series	ACADIA
email
last changed	2022/06/07 07:50

_id	cf2003_m_046
id	cf2003_m_046
authors	HWANG, Jie-Eun and CHOI, Jin-Won
year	2003
title	SpaceScope: Spatial Content-Based Retrieval of Architectural Floor Plans
source	Digital Design - Research and Practice [Proceedings of the 10th International Conference on Computer Aided Architectural Design Futures / ISBN 1-4020-1210-1] Tainan (Taiwan) 13–15 October 2003, pp. 53-62
summary	This research investigates spatial information retrieval in architecture, based on an efficient metadata that is crucial for content-based retrieval. SpaceCore is the metadata schema for spatial information on a floor plan implemented with RDF (Resource Description Framework). To generate metadata, we analyse the factors of spatial information, and then construct a data model containing the content and structure of spatial information. To exploit the metadata, we suggest various query operations with possible predicates and interfaces. SpaceScope, the spatial information retrieval system, consists of three modules: an input data module, a query module, and a browse module. As to implementation, we have already developed the real time plan-structuring system, called “Vitruvius”, as an inputting and modelling data module (using C++). Based on the database, the system performs the similarity analysis and then evaluates the alternative plans with the retrieval goals. At the end of the paper we discuss the potential of SpaceScope in the schematic design stage of the architectural design process, possibly improving and triggering the designer’s conceptual approach against a logical background and facilitate rapid decision-making after full consideration.
keywords	case-based reasoning, content-based retrieval, metadata, RDF, semantic
series	CAAD Futures
last changed	2003/09/22 12:21

_id	2206
id	2206
authors	Kvan, Thomas
year	2004
title	REASONS TO STOP TEACHING CAAD
source	Mao-Lin Chiu (ed), Digital design education, Garden City Publishing, Taipei 2003, ISBN 9867705203
summary	Computers are a problem. They are expensive, even if the prices have dropped dramatically and promise to continue dropping. They do not look after themselves but demand considerable attention – we have to hire computer specialists to ensure they talk to each other, staff are required to make sure software is installed and to fix things when it no longer works. Learning to use them is tedious; skills have to be developed to master several idiosyncratic software systems. The hardware and software regularly malfunction. It is faster to draw a line by hand than with software. Students already have enough trouble learning how to stop a window leaking or ensure a fire escape route will protect people in time of trouble, why make them learn all these other things. We should stop teaching CAAD. Although technological and economic issues are very real and not to be dismissed lightly, the real problems of teaching CAAD are not these. The real issues we need to address is how we teach and, behind that, why we teach. This paper explores the what and why.
keywords	pedagogy
series	other
type	normal paper
email
last changed	2004/09/27 07:10

_id	2d9f
authors	Lalovic, Ksenija and Djukanovic, Zoran
year	2003
title	Possibilities of applying the E-government management concept in Serbian cities
source	CORP 2003, Vienna University of Technology, 25.2.-28.2.2003 [Proceedings on CD-Rom]
summary	Recent urban transformations worldwide consequentially lead to the numerous environmental problems that have to be solved bycomplex structure of social interest groups which have to be included in that process. This demands initiated requisitioning andmodification of concepts and methodologies of planning and managing urban development. At this moment there are differentmodels used in world wide practice, but main bases of new methods and techniques are the same. Leaving the idea of possibility ofconstituting the universal urban planning model lead to very productive results in developing the disciplinary methodologies. Processof transformation of traditional comprehensive urban planning model to integrated procedural pluralistic model (based on sustainabledevelopment principles) is something that can be underlined as a main characteristic of disciplinary development. The questions ofdecision making mechanisms and plans implementation are put in axes of conceptual and methodological considerations. Urbanplanning loses the classic form of making the multi level comprehensive urban plans with exact spatial and time horizon. It means, ingeneral that planning and managing of urban development is aiming to be realistic, decentralized, strategic and problem oriented,arbitrary, not instructive, but understood as a efficient and effective process.Operational support to the this kind of approach are Decision Support IT tools, such as GIS - Geographical Information Systems orES -Expert Systems. Usability of IT tools is based on their capability to perform fast and complicated processing of spatial data andon their flexibility towards specific real problems which are to be solved. In order to use maximum of capabilities of these tools inpractice problem solving it is necessary to adjust their structure and usage to the: - actual conditions of socioeconomic of the contextin which urban development planning and management is performed, - practical demands that managing of urban development has tofore fill, - all participants in urban management process, - institutional mechanisms and procedures.
series	other
email
last changed	2003/03/11 20:39

_id	acadia03_005
id	acadia03_005
authors	Maher, Andrew and Burry, Mark
year	2003
title	The Parametric Bridge: Connecting Digital Design Techniques in Architecture And Engineering
doi	https://doi.org/10.52842/conf.acadia.2003.039
source	Connecting >> Crossroads of Digital Discourse [Proceedings of the 2003 Annual Conference of the Association for Computer Aided Design In Architecture / ISBN 1-880250-12-8] Indianapolis (Indiana) 24-27 October 2003, pp. 39-47
summary	New design opportunities that are facilitated by cross-disciplinary collaboration in both practice and research are available through the use of high level design software that simultaneously offers real time access to both analysis and design geometry in shared three-dimensional digital models. Here we present a collaborative research project between architects and structural engineers for the design of a pedestrian bridge, conceived to test current digital design processes in architectural and structural engineering practice with those in research through the use of models of parametrically defined associative geometry. In this project, the digital model’s architectural design geometry was constrained by the bridge’s fabrication methods and linked with its engineering analysis. Iterations of the design geometry were then optimised or ‘solved’ to produce variations according to the design parameters offered up for change. The shift of the professions from the plane to digital space exposes the possibilities of new design techniques with the exchange of design parameters potentially operating as a digital dialogue between the disciplines—a kind of digital version of Antoni Gaudi’s funicular hanging model—a metaphor of the digital space that has been developed for this project.
series	ACADIA
email
last changed	2022/06/07 07:59

_id	ecaade03_047_70_maher
id	ecaade03_047_70_maher
authors	Maher, M.L., Liew, P.-S., Gu, N. and Ding, L.
year	2003
title	An Agent Approach to Supporting Collaborative Design in 3D Virtual Worlds
doi	https://doi.org/10.52842/conf.ecaade.2003.047
source	Digital Design [21th eCAADe Conference Proceedings / ISBN 0-9541183-1-6] Graz (Austria) 17-20 September 2003, pp. 47-52
summary	3D Virtual worlds facilitate a level of communication and collaboration not readily available in conventional CAD systems. The integration of virtual worlds and CAD systems using a common data model can make a significant impact on synchronous collaboration and real time multi-user multi-disciplinary modification of building data. By using agents, the integration of 3D virtual worlds and CAD systems can go beyond that of passive data transfer. With sensors and effectors, each agent can interact with its environment by responding to changes in the CAD system or 3D virtual world, which can take the form of an update to the geometry, or as a recommendation to change non geometric information or to propagate changes to other parts of the design. The reasoning process for each agent can vary from a reflexive behaviour in which the agent responds directly to the sensor data to a reflective behaviour in which the agents reasons about its goals and alternatives before making a change to the environment. We demonstrate this approach using ArchiCAD and Active Worlds as the CAD system and the virtual world platform. An EDM database is used as the central repository for storing the representation of the relevant data model. A multi-agent system is developed to connect the virtual world to this database to allow active data sharing. This agent approach can be extended to the integration of other applications and data models.
keywords	Design Collaboration, Virtual World, Agent and CAD
series	eCAADe
email
more	http://www.arch.usyd.edu.au/~mary
last changed	2022/06/07 07:59

For more results click below: