Cumincad : CUMINCAD Papers : Search Results

CumInCAD is a Cumulative Index about publications in Computer Aided Architectural Design
supported by the sibling associations ACADIA, CAADRIA, eCAADe, SIGraDi, ASCAAD and CAAD futures

PDF papers
References

Hits 1 to 20 of 602

Reformat results as: short short into frame detailed detailed into frame

_id	adae
id	adae
authors	Cheng, Nancy Yen-wen
year	2003
title	Approaches to Design Collaboration Research
source	Automation in Construction Volume 12, Issue 6, November 2003, Pages 715-723
summary	This survey of architectural design collaboration identifies and categorizes strong research from the past ten years. It starts by describing how the research ranges in focus, scale and structure, then clarifies how different projects fit in a continuum from conceptual theory to pragmatic application. It explains how conceptual frameworks and standards enable interdisciplinary exchange by envisioning and structuring interaction. It then highlights specific interaction studies and compares methods for analyzing how media affects teamwork. The paper continues by explaining the promise of innovations such as tangible interfaces and interactive artwork, and concludes by identifying areas for further development.
keywords	design collaboration, groupwork, computer-supported cooperative design, human-computer interaction
series	journal paper
type	normal paper
email
last changed	2007/12/14 19:54

_id	ecaade03_527_71_donath
id	ecaade03_527_71_donath
authors	Donath, Dirk and Weferling, Ulrich
year	2003
title	Digital building surveying and planning Integrative approaches with commercial object-oriented CAAD systems
doi	https://doi.org/10.52842/conf.ecaade.2003.527
source	Digital Design [21th eCAADe Conference Proceedings / ISBN 0-9541183-1-6] Graz (Austria) 17-20 September 2003, pp. 527-532
summary	As a result of growing activity in the field of renovation and building within existing built contexts, modern digital tools and methods are increasingly in demand. Support of the planning process means: the step-by-step capture of building-relevant information, a rule and parameter-based development of solutions and the combination of traditional and automated methods and technologies used for model creation (building surveying) and model transformation (planning). This article discusses general requirements and the results from our own research and development as well as illustrating how building surveying can already contribute to the planning process more effectively using currently available tools.
keywords	Planning, Building surveying, Process model, CAAD, IT-planning tools, renovation, 3D-model, information systems
series	eCAADe
email
more	http://infar.architektur.uni-weimar.de
last changed	2022/06/07 07:55

_id	ecaade03_017_136_franz
id	ecaade03_017_136_franz
authors	Franz, G., Von der Heyde, M. and Bülthoff, H.H.
year	2003
title	An empirical approach to the experience of architectural space in VR - Exploring relations between features and affective appraisals of rectangular interiors
doi	https://doi.org/10.52842/conf.ecaade.2003.017
source	Digital Design [21th eCAADe Conference Proceedings / ISBN 0-9541183-1-6] Graz (Austria) 17-20 September 2003, pp. 17-24
summary	While it is well known that the built environment influences our emotional state, it is often difficult to attribute these experiences to particular properties. In fact, a systematic investigation of the relation between physical structure and emotional experience of architecture has not yet been done. Now virtual reality simulations facilitate a completely controlled variation of spatial properties and thus allow to empirically evaluate architectural hypothesises. The aim of the presented study was to investigate which factors from a component-based description of rooms significantly correlate with cardinal dimensions of experience. In a perceptual experiment experiental qualities of 16 virtual vacant rectangular interiors were rated in eight principal categories by 16 participants using the semantic differential scaling technique. The scenes were generated by a custom made graphics tool that also automatically generated the component-based scene descriptions. The data analysis revealed several interesting correlations between scene features and rated experience: For example, a preference for ratios near to the golden section could be observed for spatial proportions, which are not directly perceivable. Altogether, a set of five independent factors (openness, two room proportions, room area and balustradeheight) appeared to be effective for widely describing the observed variance of the averaged attributed experiental qualities. Our combination of realistic virtual reality simulations and psychophysical data raising methods proved to be effective for basic architectural research. It allowed us to demonstrate quantitative relations between physical properties from a component-based description of architectural space and its emotional experience.
keywords	Experiental Qualities; Psychophysics; Correlation Analysis; Virtual Reality
series	eCAADe
email
more	http://www.kyb.tuebingen.mpg.de/~gf
last changed	2022/06/07 07:50

_id	avocaad_2003_01
id	avocaad_2003_01
authors	Jack Breen
year	2003
title	VISTA VERSA – Critical Considerations on the Evolvement of Designerly Attitudes, Instruments and Networks in Design Driven Studies
source	LOCAL VALUES in a NETWORKED DESIGN WORLD - ADDED VALUE OF COMPUTER AIDED ARCHITECTURAL DESIGN, Stellingwerff, Martijn and Verbeke, Johan (Eds.), (2004) DUP Science - Delft University Press, ISBN 90-407-2507-1.
summary	Keynote Paper - We are all involved in design.Besides being the (sub)conscious recipients of all sorts of design driven activities, we are professionally concerned with products of design and acts of designing, either as practitioners or as academics, in some cases as both… As someone who was trained as a designer, drifted into design teaching and presently attempts to combine composition research with design practice, I feel there is a need to bridge the cultural gap between design and design research. I intend to put forward the case for more designerly approaches in the study of design. In this context I would like to discuss perspectives for design driven studies by considering the following ensemble of aspects:- the matter of shifting attitudes to design in a scientific context; - the necessity of expanding the scope of instruments of design in relation to methods and insights. - the furthering of opportunities for networks aimed at bringing out and communicating findings concerning different aspects of design.It is on the topic of interaction, between the targeted creativity of designing on the one hand and the open minded search for relevant knowledge, insights and applications on the other, that I would like to dwell. Furthermore, I hope to provoke some thoughts – and hopefully responses – concerning the roles of computer based applications in such studies. What kinds of impulses have computer technologies offered, should they perhaps have offered and indeed might they still be able to offer in this field? I would like to by take a critical look back and try to turn things around, towards a possible view forward…
keywords	Architecture, Local values, Globalisation, Computer Aided Architectural Design
series	AVOCAAD
email
last changed	2006/01/16 21:38

_id	sigradi2003_114
id	sigradi2003_114
authors	Spitz, Rejane
year	2003
title	National Virtual Observatory (NVO): A Needs Assessment Study of the Art Community (National Virtual Observatory (NVO): A Needs Assessment Study of the Art Community)
source	SIGraDi 2003 - [Proceedings of the 7th Iberoamerican Congress of Digital Graphics] Rosario Argentina 5-7 november 2003
summary	The results of a needs-assessment study of the Art community recently conducted at CSE@SSL at UC Berkeley - which investigated how large databases of space science imagery and data analysis tools can be used for Education and Public Outreach purposes - have highlighted the artistic community's strong interest for greater involvement and exposure to space science. Artists expressed their desire to have access to space science research and data, and to participate in the process of creating compelling space science related tools and interfaces. New approaches have been suggested by them as regards the presentation of information on a multi-sensorial and intuitive way, all pointing to more effective methods of space science knowledge acquisition.
keywords	Art, space science, web design, astronomy, public outreach
series	SIGRADI
email
last changed	2016/03/10 10:01

_id	caadria2003_c2-4
id	caadria2003_c2-4
authors	Al-Sallal, Khaled A.
year	2003
title	Integrating Energy Design Into Caad Tools: Theoretical Limits and Potentials
doi	https://doi.org/10.52842/conf.caadria.2003.323
source	CAADRIA 2003 [Proceedings of the 8th International Conference on Computer Aided Architectural Design Research in Asia / ISBN 974-9584-13-9] Bangkok Thailand 18-20 October 2003, pp. 323-340
summary	The study is part of a research aims to establish theoretical grounds essential for the development of user efficient design tools for energy-conscious architectural design, based on theories in human factors of intelligent interfaces, problem solving, and architectural design. It starts by reviewing the shortcomings of the current energy design tools, from both architectural design and human factor points of view. It discusses the issues of energy integration with design from three different points of view: architectural, problem-solving, and human factors. It evaluates theoretically the potentials and limitations of the current approaches and technologies in artificial intelligence toward achieving the notion "integrating energy design knowledge into the design process" in practice and education based on research in the area of problem solving and human factors and usability concerns. The study considers the user interface model that is based on the cognitive approach and can be implemented by the hierarchical structure and the object-oriented model, as a promising direction for future development. That is because this model regards the user as the center of the design tool. However, there are still limitations that require extensive research in both theoretical and implementation directions. At the end, the study concludes by discussing the important points for future research.
series	CAADRIA
email
last changed	2022/06/07 07:54

_id	avocaad_2003_09
id	avocaad_2003_09
authors	Alexander Asanowicz
year	2003
title	Form Follows Media - Experiences of Bialystok School of Architectural Composition
source	LOCAL VALUES in a NETWORKED DESIGN WORLD - ADDED VALUE OF COMPUTER AIDED ARCHITECTURAL DESIGN, Stellingwerff, Martijn and Verbeke, Johan (Eds.), (2004) DUP Science - Delft University Press, ISBN 90-407-2507-1.
summary	This paper considers transition from physical modelling to digital methods of the creation of architectural forms. Every type of creation has constructed the proper means of expression and its own methodology. The main thesis of this paper is that a specific character of the composition activity of an architect is determined by the modelling methods. As the research on architectural modelling, the two methods of creating spatial architectural forms (cardboard model and computer model) have been compared. Research has been done on the basis of the same exercise for both media. The process of creation proceeded in the same way, too. As the start point students have found the inspiration. Each student presented photos of existing architectural objects and a text, which explained the reasons of the choice. Next steps were sketches of the idea and realisation of the model. The achieved results of creative activity fully confirm the thesis of the research.
keywords	Architecture, Local values, Globalisation, Computer Aided Architectural Design
series	AVOCAAD
email
last changed	2006/01/16 21:38

_id	acadia03_042
id	acadia03_042
authors	Anzalone, Phillip and Clarke, Cory
year	2003
title	Architectural Applications of Complex Adaptive Systems
doi	https://doi.org/10.52842/conf.acadia.2003.325
source	Connecting >> Crossroads of Digital Discourse [Proceedings of the 2003 Annual Conference of the Association for Computer Aided Design In Architecture / ISBN 1-880250-12-8] Indianapolis (Indiana) 24-27 October 2003, pp. 325-335
summary	This paper presents methods and case studies of approaching architectural design and fabrication utilizing Complex Adaptive Systems (CASs). The case studies and observations described here are findings from a continuing body of research investigating applications of computational systems to architectural practice. CASs are computational mechanisms from the computer science field of Artificial Life that provide frameworks for managing large numbers of elements and their inter-relationships. The ability of the CASs to handle complexity at a scale unavailable through non-digital means provides new ways of approaching architectural design, fabrication, and practice.
series	ACADIA
email
last changed	2022/06/07 07:55

_id	ecaade03_397_180_bialas
id	ecaade03_397_180_bialas
authors	Bialas, Z., Glinkowska, A., Kepczynska-Walczak, A., Szrajber, R. and Urbaniak, M.
year	2003
title	The ICT as a Driving Force in The Field of Archaeological Research
doi	https://doi.org/10.52842/conf.ecaade.2003.397
source	Digital Design [21th eCAADe Conference Proceedings / ISBN 0-9541183-1-6] Graz (Austria) 17-20 September 2003, pp. 397-402
summary	The paper is a contribution to the domain of computer tools for archaeological excavations and research. The present project described in this paper has been undertaken in close co-operation of specialists from two universities including archaeologists and architects from the CAAD unit. The project objective is to assess the suitability of new media offering an alternative to the traditional methods in archaeological practice.
keywords	Innovation; Research, Education & Practice; Integration of ICT withinarchaeological research
series	eCAADe
email
more	http://www.arch.p.lodz.pl
last changed	2022/06/07 07:52

_id	cf2011_p157
id	cf2011_p157
authors	Boton, Conrad; Kubicki Sylvain, Halin Gilles
year	2011
title	Understanding Pre-Construction Simulation Activities to Adapt Visualization in 4D CAD Collaborative Tools
source	Computer Aided Architectural Design Futures 2011 [Proceedings of the 14th International Conference on Computer Aided Architectural Design Futures / ISBN 9782874561429] Liege (Belgium) 4-8 July 2011, pp. 477-492.
summary	Increasing productivity and efficiency is an important issue in the AEC field. This area is mainly characterized by fragmentation, heterogeneous teams with low lifetimes and many uncertainties. 4D CAD is one of the greatest innovations in recent years. It consists in linking a 3D model of the building with the works planning in order to simulate the construction evolution over time. 4D CAD can fill several needs from design to project management through constructivity analysis and tasks planning (Tommelein 2003). The literature shows that several applications have been proposed to improve the 4D CAD use (Chau et al. 2004; Lu et al. 2007; Seok & al. 2009). In addition, studies have shown the real impact of 4D CAD use in construction projects (Staub-French & Khanzode 2007; Dawood & Sika 2007). More recently, Mahalingam et al. (2010) showed that the collaborative use of 4D CAD is particularly useful during the pre-construction phase for comparing the constructability of working methods, for visually identifying conflicts and clashes (overlaps), and as visual tool for practitioners to discuss and to plan project progress. So the advantage of the 4D CAD collaborative use is demonstrated. Moreover, several studies have been conducted both in the scientific community and in the industrial world to improve it (Zhou et al. 2009; Kang et al. 2007). But an important need that remains in collaborative 4D CAD use in construction projects is about the adaptation of visualization to the users business needs. Indeed, construction projects have very specific characteristics (fragmentation, variable team, different roles from one project to another). Moreover, in the AEC field several visualization techniques can represent the same concept and actors choose one or another of these techniques according to their specific needs related to the task they have to perform. For example, the tasks planning may be represented by a Gantt chart or by a PERT network and the building elements can be depicted with a 3D model or a 2D plan. The classical view (3D + Gantt) proposed to all practitioners in the available 4D tools seems therefore not suiting the needs of all. So, our research is based on the hypothesis that adapting the visualization to individual business needs could significantly improve the collaboration. This work relies on previous ones and aim to develop a method 1) to choose the best suited views for performed tasks and 2) to compose adapted multiple views for each actor, that we call ‚Äúbusiness views‚Äù. We propose a 4 steps-method to compose business views. The first step identifies the users‚Äô business needs, defining the individual practices performed by each actor, identifying his business tasks and his information needs. The second step identifies the visualization needs related to the identified business needs. For this purpose, the user‚Äôs interactions and visualization tasks are described. This enables choosing the most appropriate visualization techniques for each need (step 3). At this step, it is important to describe the visualization techniques and to be able to compare them. Therefore, we proposed a business view metamodel. The final step (step 4) selects the adapted views, defines the coordination mechanisms and the interaction principles in order to compose coordinated visualizations. A final step consists in a validation work to ensure that the composed views really match to the described business needs. This paper presents the latest version of the method and especially presents our latest works about its first and second steps. These include making more generic the business tasks description in order to be applicable within most of construction projects and enabling to make correspondence with visualization tasks.
keywords	Pre-construction, Simulation, 4D CAD, Collaboration, Computer Supported Cooperative Work, Human-Computer Interface, Information visualization, Business view, Model driven engineering
series	CAAD Futures
email
last changed	2012/02/11 19:21

_id	caadria2003_b1-2
id	caadria2003_b1-2
authors	Chakraborty, Somen
year	2003
title	Automated Generation of Residential Roomlayout within a Constrained Covered Area
doi	https://doi.org/10.52842/conf.caadria.2003.085
source	CAADRIA 2003 [Proceedings of the 8th International Conference on Computer Aided Architectural Design Research in Asia / ISBN 974-9584-13-9] Bangkok Thailand 18-20 October 2003, pp. 85-100
summary	A significant quantum of all buildings constructed in modern times is designed for residential purpose. A tremendous amount of money is being spent every year for construction of residential buildings. Therefore, optimization of design becomes very important. In a country like India most people in urban area live in houses having constrained area. A significant part of residential units comes under mass housing either as high-rise building blocks or as plotted developments. In any of such schemes there are large number of housing units for a group of families of whom general characteristics are known but characteristics of individual families are not known at the time of designing. This situation is, however, suitable for scientific investigation and analysis based on statistical surveys. Broadly speaking, this paper suggests approach to deal with this situation of finding optimum layout of rooms of a housing unit for any target group of families when the covered area is so constrained that freedom of using different criteria like aesthetics, structural systems, materials and methods of construction in varieties of ways is drastically reduced. In such constrained area for housing units rooms are generally found rectangular within overall rectangular outline of each unit. Method shown here is valid under this restriction. It is also assumed that number of rooms will be restricted to such number that exhaustive search for design is practically possible within a reasonable time with present day capabilities of normally available PCs.
series	CAADRIA
email
last changed	2022/06/07 07:55

_id	cf2003_m_056
id	cf2003_m_056
authors	De GRASSI, M., GIRETTI, A., BAZZANELLA, L and CANEPARO, L.
year	2003
title	The AEC Virtual University - Design Oriented Knowledge Transfer Methods and Technologies
source	Digital Design - Research and Practice [Proceedings of the 10th International Conference on Computer Aided Architectural Design Futures / ISBN 1-4020-1210-1] Tainan (Taiwan) 13–15 October 2003, pp. 313-323
summary	The paper introduces the Web based INtelligent Design Support (WINDS) European Project to support education in design, a.k.a. the AEC Virtual University. The Project is divided into two actions. First, the research technology action will implement a learning environment integrating an intelligent design tutoring system, a computer instruction management system and a set of co-operative supporting tools. Second, the development action will build a large knowledge base supporting Architecture, Civil Engineering and Construction Design Courses and to experiment a comprehensive AEC Virtual University.
keywords	design pedagogy, case-based teaching, e-learning, goal-based scenario, knowledge-based
series	CAAD Futures
email
last changed	2003/09/22 12:21

_id	sigradi2003_041
id	sigradi2003_041
authors	Deiana, S., Baseggio, M., Giudici, F. and Balmaceda, M.I.
year	2003
title	Modelo informático. Transformaciones y mutaciones en el territorio (IT Model. Transformations and mutations in the territory)
source	SIGraDi 2003 - [Proceedings of the 7th Iberoamerican Congress of Digital Graphics] Rosario Argentina 5-7 november 2003
summary	In this paper the conformations, transformations, and mutations developed in the territory of San Juan city, particularly in its Rivadavia shire, due to the developing modeling are analyzed. It includes a series of morphological knowledge on growing styles (continuous and discontinuous), about residential groups and the sense of urban spaces. These studies allow us to formulate design strategies applicable to new complexes, based on programmatic studies that define indicators for typology selection and morphologic development. Those research works were based on comparatives studies of the city before and after the 44's earthquake to the present, involving others knowledge areas and methods and multimedia techniques.
series	SIGRADI
email
last changed	2016/03/10 09:50

_id	sigradi2003_036
id	sigradi2003_036
authors	Donath, Dirk and González, Luis Felipe
year	2003
title	Rule-based spaces configuration procedures to support user-designed housing
source	SIGraDi 2003 - [Proceedings of the 7th Iberoamerican Congress of Digital Graphics] Rosario Argentina 5-7 november 2003
summary	This article reports on our current explorations on systemizable tasks of architectural design and parametric design supported by rule-based generation methods of spatial configuration alternatives to assist user-design processes of progressive development low-cost dwellings. This exploration is part of an ongoing major research towards an integrated planning support system for low-income housing; we called Esther, which is focused on the development of a network-based set of tools to support logistics of self-designed /-built dwellings life-cycle. Esther addresses the systemized collaborative work between dwellers and specialists during the whole development cycle of dwellings.
keywords	Planning tool; user-designed housing; parametric design; decision support; adaptable dwelling
series	SIGRADI
email
last changed	2016/03/10 09:50

_id	ecaade03_541_131_fiamma
id	ecaade03_541_131_fiamma
authors	Fiamma, Paolo
year	2003
title	Object oriented Thinking for Technical Architecture Modelling
doi	https://doi.org/10.52842/conf.ecaade.2003.541
source	Digital Design [21th eCAADe Conference Proceedings / ISBN 0-9541183-1-6] Graz (Austria) 17-20 September 2003, pp. 541-546
summary	Today it is increasingly important to focus the efforts of research on thinking about the great innovation introduced by digital 3D modelling in the housing sector, not only in the merits but also in the methods of the designing conception. Thinking of an object-orientated constructive 3D model does not only mean to represent it, but to conceive it, by generating it within an existing although virtual space. This encourages one to focus not only on the formal and compositive side, but also on the technical and technological side of the future building, whose constructive components are brought in, arranged and above all connected within the virtual building, as will happen in the practice of building, according to the building rules.
keywords	Virtual Architecture, 3D Model, Object Oriented, Project Thinking
series	eCAADe
email
last changed	2022/06/07 07:50

_id	cf2003_m_005
id	cf2003_m_005
authors	FISCHER, T., BURRY, M. and FRAZER, J.
year	2003
title	How to Plant a Subway System
source	Digital Design - Research and Practice [Proceedings of the 10th International Conference on Computer Aided Architectural Design Futures / ISBN 1-4020-1210-1] Tainan (Taiwan) 13–15 October 2003, pp. 403-412
summary	We speculate on a possible CAAD future that deploys and extends paradigms of natural growth and cellular development to an extent that would allow the planting and growth of man-made structures. This approach is based on the translation and expression of digital data structures into artificial physical form and the building of structures by decentral means. In such a scenario, generative and evolutionary architecture could seamlessly blend into building construction. As a discussion of as yet unavailable future technologies and methodologies the proposed remains at a “sketchy” level and must largely limit itself to preliminary and speculative considerations. In order to restrain the scope of this paper to the area of building design and construction, we focus on subway development and discuss possible cellular approaches to this particular field emphasizing aspects of functional aesthetics. We encourage the reader to take this example as a point of departure only, to generalise our explanations and to apply them to other building types. We support our discussion with findings made in software simulations of humandesigned cellular growth processes.
keywords	cellular, evolutionary, morphogenesis, subway
series	CAAD Futures
email
last changed	2003/09/22 12:21

_id	cf2003_m_094
id	cf2003_m_094
authors	GARCIA, Renato
year	2003
title	Feeling the Heat - Exploring the Impact of Fire in Architectural Structures though Multimodal Interaction
source	Digital Design - Research and Practice [Proceedings of the 10th International Conference on Computer Aided Architectural Design Futures / ISBN 1-4020-1210-1] Tainan (Taiwan) 13–15 October 2003, pp. 383-392
summary	This paper discusses the background and basis behind a computer program developed by the author that incorporates a haptic feedback and audio interface into a visually interactive simulation of the structural response of buildings to fire. Structures are limited to steel in particular. The audio interface makes use of sonification and affective techniques while the haptic interface takes advantage of force feedback technology. The simulation is also meant to be holistic, qualitative, intuitive, temporal yet interactive. The primary innovation in this fire simulation system is the incorporation of audio and haptic feedback interaction into the usual visual interface.
keywords	computing, force feedback, HCI, interface, sonification
series	CAAD Futures
last changed	2003/09/22 12:21

_id	caadria2003_b1-4
id	caadria2003_b1-4
authors	Gero, John S. and Jupp, Julie R.
year	2003
title	Feature Based Qualitative Representation of Architectural Plans Information Contained In 2-Dimensional Design Drawings.
doi	https://doi.org/10.52842/conf.caadria.2003.117
source	CAADRIA 2003 [Proceedings of the 8th International Conference on Computer Aided Architectural Design Research in Asia / ISBN 974-9584-13-9] Bangkok Thailand 18-20 October 2003, pp. 117-130
summary	This paper develops an approach to the qualitative representation of architectural plan drawings. We describe a schema for representing the internal shapes features and their associated spatial relations using syntactic pattern and contour specifications. This schema uses a qualitative symbolic representation to detect features. An example application of this representation is presented.
series	CAADRIA
email
last changed	2022/06/07 07:51

_id	diss_2003
id	diss_2003
authors	Gorczyca, Adam
year	2003
title	Interaction of the design methods and the contemporary computer techniques
source	Faculty of Architecture, Warsaw University of Technology
summary	The thesis researches a bilateral relations between computer techniques and methods of architectural design. It represents a holistic attitude because of a multithread analysis in the field of the theory of design, a new hard- and software used by architects, and a design practice. Thesis: Contemporary computer science development at the end of the twentieth century pushed architects to use hard- and software as tools, which became an active support (more than just CAAD). It enabled to widen the scope of a form-properties research and a generation of solutions impossible to achieve before, by using traditional methods and tools. This situation leads to new, unpredictable possibilities of architectural research and design. Objectives: 1. Definition of the latest trends in computer technologies applied in architectural offices. 2. Presentation of some practical consequencies of application of those technologies in design and construction. 3. Separation of new design methods caused by use of digital tools. 4. A simplified taxonomy of the methods above, with characteristic features. 5. A research in practical application of digital tools in Polish and foreign offices, as well as at the WUT Faculty of Architecture. The subject of the work: The thesis constitutes of five chapters. The first chapter is an introduction, where the range of work is presented in the context of place, time and the research made. The following chapters research three aspects of CAAD: (1) hardware and software, (2) new definition of architecture, which is a result of application of the digital tools, (3) practical problems connected with the use of computer techniques. The second chapter describes the new technologies in use –Virtual Reality (incl. VRD, CAVE’s, Data Gloves, motion-capture), Rapid prototyping (incl. holographic printers, 3D scanners, routers, milling-machines), new types of interfaces (e.g. xWorlds, InfoSpace, Flock of birds), etc. The third chapter is a theoretical one. It presents three types of changes in design methods, which can be classified, judging by results, in architecture of: (a) in-formation (b) de-formation and (c) cyberspace. All the mentioned applications of a digital technology cause redefinition of the range of the architects’ profession. The fourth chapter is concentrated on the application and utilization of technology. It is a detailed analysis of chosen buildings (characteristic examples) and design methods used by some avant-garde and well-known practitioners and visioners of architecture (Eisenman, Gehry, Spuybroek, etc.). It also presents statistics, where the influence of digital tools on the way of working (efficiency, productivity, use of tools) is expressed numerically. A synthesis summarizes the relation between architects and the new digital tools in some aspects: hard- and software, social changes, ergonomics, methodics, linguistic/symbolic and architectural. The mentioned ranges of interaction constitute the proof of the thesis.
series	thesis:PhD
email
last changed	2003/09/17 18:20

_id	sigradi2006_e028c
id	sigradi2006_e028c
authors	Griffith, Kenfield; Sass, Larry and Michaud, Dennis
year	2006
title	A strategy for complex-curved building design:Design structure with Bi-lateral contouring as integrally connected ribs
source	SIGraDi 2006 - [Proceedings of the 10th Iberoamerican Congress of Digital Graphics] Santiago de Chile - Chile 21-23 November 2006, pp. 465-469
summary	Shapes in designs created by architects such as Gehry Partners (Shelden, 2002), Foster and Partners, and Kohn Peterson and Fox rely on computational processes for rationalizing complex geometry for building construction. Rationalization is the reduction of a complete geometric shape into discrete components. Unfortunately, for many architects the rationalization is limited reducing solid models to surfaces or data on spread sheets for contractors to follow. Rationalized models produced by the firms listed above do not offer strategies for construction or digital fabrication. For the physical production of CAD description an alternative to the rationalized description is needed. This paper examines the coupling of digital rationalization and digital fabrication with physical mockups (Rich, 1989). Our aim is to explore complex relationships found in early and mid stage design phases when digital fabrication is used to produce design outcomes. Results of our investigation will aid architects and engineers in addressing the complications found in the translation of design models embedded with precision to constructible geometries. We present an algorithmically based approach to design rationalization that supports physical production as well as surface production of desktop models. Our approach is an alternative to conventional rapid prototyping that builds objects by assembly of laterally sliced contours from a solid model. We explored an improved product description for rapid manufacture as bilateral contouring for structure and panelling for strength (Kolarevic, 2003). Infrastructure typically found within aerospace, automotive, and shipbuilding industries, bilateral contouring is an organized matrix of horizontal and vertical interlocking ribs evenly distributed along a surface. These structures are monocoque and semi-monocoque assemblies composed of structural ribs and skinning attached by rivets and adhesives. Alternative, bi-lateral contouring discussed is an interlocking matrix of plywood strips having integral joinery for assembly. Unlike traditional methods of building representations through malleable materials for creating tangible objects (Friedman, 2002), this approach constructs with the implication for building life-size solutions. Three algorithms are presented as examples of rationalized design production with physical results. The first algorithm [Figure 1] deconstructs an initial 2D curved form into ribbed slices to be assembled through integral connections constructed as part of the rib solution. The second algorithm [Figure 2] deconstructs curved forms of greater complexity. The algorithm walks along the surface extracting surface information along horizontal and vertical axes saving surface information resulting in a ribbed structure of slight double curvature. The final algorithm [Figure 3] is expressed as plug-in software for Rhino that deconstructs a design to components for assembly as rib structures. The plug-in also translates geometries to a flatten position for 2D fabrication. The software demonstrates the full scope of the research exploration. Studies published by Dodgson argued that innovation technology (IvT) (Dodgson, Gann, Salter, 2004) helped in solving projects like the Guggenheim in Bilbao, the leaning Tower of Pisa in Italy, and the Millennium Bridge in London. Similarly, the method discussed in this paper will aid in solving physical production problems with complex building forms. References Bentley, P.J. (Ed.). Evolutionary Design by Computers. Morgan Kaufman Publishers Inc. San Francisco, CA, 1-73 Celani, G, (2004) “From simple to complex: using AutoCAD to build generative design systems” in: L. Caldas and J. Duarte (org.) Implementations issues in generative design systems. First Intl. Conference on Design Computing and Cognition, July 2004 Dodgson M, Gann D.M., Salter A, (2004), “Impact of Innovation Technology on Engineering Problem Solving: Lessons from High Profile Public Projects,” Industrial Dynamics, Innovation and Development, 2004 Dristas, (2004) “Design Operators.” Thesis. Massachusetts Institute of Technology, Cambridge, MA, 2004 Friedman, M, (2002), Gehry Talks: Architecture + Practice, Universe Publishing, New York, NY, 2002 Kolarevic, B, (2003), Architecture in the Digital Age: Design and Manufacturing, Spon Press, London, UK, 2003 Opas J, Bochnick H, Tuomi J, (1994), “Manufacturability Analysis as a Part of CAD/CAM Integration”, Intelligent Systems in Design and Manufacturing, 261-292 Rudolph S, Alber R, (2002), “An Evolutionary Approach to the Inverse Problem in Rule-Based Design Representations”, Artificial Intelligence in Design ’02, 329-350 Rich M, (1989), Digital Mockup, American Institute of Aeronautics and Astronautics, Reston, VA, 1989 Schön, D., The Reflective Practitioner: How Professional Think in Action. Basic Books. 1983 Shelden, D, (2003), “Digital Surface Representation and the Constructability of Gehry’s Architecture.” Diss. Massachusetts Institute of Technology, Cambridge, MA, 2003 Smithers T, Conkie A, Doheny J, Logan B, Millington K, (1989), “Design as Intelligent Behaviour: An AI in Design Thesis Programme”, Artificial Intelligence in Design, 293-334 Smithers T, (2002), “Synthesis in Designing”, Artificial Intelligence in Design ’02, 3-24 Stiny, G, (1977), “Ice-ray: a note on the generation of Chinese lattice designs” Environmental and Planning B, volume 4, pp. 89-98
keywords	Digital fabrication; bilateral contouring; integral connection; complex-curve
series	SIGRADI
email
last changed	2016/03/10 09:52

For more results click below: