Cumincad : CUMINCAD Papers : Search Results

CumInCAD is a Cumulative Index about publications in Computer Aided Architectural Design
supported by the sibling associations ACADIA, CAADRIA, eCAADe, SIGraDi, ASCAAD and CAAD futures

PDF papers
References

Hits 1 to 20 of 605

Reformat results as: short short into frame detailed detailed into frame

_id	ecaade03_659_166_hungming
id	ecaade03_659_166_hungming
authors	Cheng, Hung-Ming
year	2003
title	A digital modeling with reasoning system in early phase of design
source	Digital Design [21th eCAADe Conference Proceedings / ISBN 0-9541183-1-6] Graz (Austria) 17-20 September 2003, pp. 659-664
doi	https://doi.org/10.52842/conf.ecaade.2003.659
summary	This study describes statue in the early phase of design, the approach taken by its conceptual development and manipulation. And on the developing digital tools provide a computational support for the process of indexing and retrieving. The digital modeling also addresses specifically architectural programming, adjacent relationship between the building element and articulation in designing. The overall in building mass development starting with reasoning of the conceptual model in early phase try to find evocative cases to help designer thinking. And finally discuss some issues and challenges of artificial intelligent. The research for representing designer’s creativity and searching solution provide another way to generate an articulating conceptual model. The integration approach of research starts with the pure case-based and rule-based reasoning system to help designer generate more understandable and creative product in the architectural design application.
keywords	Case-based reasoning, conceptual model, computer aided design, buildingmass development, design process
series	eCAADe
email
last changed	2022/06/07 07:55

_id	acadia03_051
id	acadia03_051
authors	Lim, Chor-Kheng
year	2003
title	G Pen: An Intelligent Designer’s Playmate
source	Connecting >> Crossroads of Digital Discourse [Proceedings of the 2003 Annual Conference of the Association for Computer Aided Design In Architecture / ISBN 1-880250-12-8] Indianapolis (Indiana) 24-27 October 2003, pp. 403-409
doi	https://doi.org/10.52842/conf.acadia.2003.403
summary	In the field of design the pen-based system is a newly developed computer interface that provides the designer with the convenience of a pen in freehand sketches. But these pen-based systems only focus on an interface familiar to the designers and the application of the hardware and software that go with it, treating the pen only as a mouse-like input device. As pen and pad are devices for the pen-based system, the hope is that they can be endowed with more intelligent characteristics to let them interact with designer’s gestures and become a creative source for the designers, while simultaneously preventing the design fixation encountered by designers during design process. This research utilizes the unintentional hand gestures made by designers, such as the designer’s grip of the pen or movement involved in playing with the pen, putting it down, knocking it, twisting it or shaking it, during the thinking process or when running into a design fixation. From the interaction between the pen and the pad, certain actions may be generated to stimulate the designer’s thinking process. This research uses a neural network as the main learning mechanism for the eventual development of a prototype of a pen-based drawing system that provides timely visual stimulation: a G Pen system.
series	ACADIA
email
last changed	2022/06/07 07:52

_id	cf2011_p163
id	cf2011_p163
authors	Park, Hyoung-June
year	2011
title	Mass-Customization in the Design of 4,000 Bus Stops
source	Computer Aided Architectural Design Futures 2011 [Proceedings of the 14th International Conference on Computer Aided Architectural Design Futures / ISBN 9782874561429] Liege (Belgium) 4-8 July 2011, pp. 265-278.
summary	In Hawaii, ‚"TheBus‚" has been a main transportation system since 1971. Considering the high cost of living in Hawaii and the absence of a rail system, the use of ‚"TheBus‚" has been an instrumental vein of the city life in Honolulu with rhythmical pauses at about 4,000 bus stops in Honolulu. However, existing undifferentiated bus stops are developed from a cost effective mass production system so that they have been problematic for satisfying specific needs from various site conditions. In this research, an integrated computational method of mass-customization for designing 4,000 bus stops is introduced. According to various site conditions, the design of each bus stop is customized. Unlike the mass‚Äêproduced bus stops commonly seen in cities today, the proposed computational method in this paper produces bus stop design outcomes that fit into the physical characteristics of the location in which they are installed. Mass-customization allows for the creation and production of unique or similar buildings and building components, differentiated through digitally‚Äêcontrolled variation (Kolarevic, 2003). The employment of a computational mass‚Äêcustomization in architectural design extends the boundary of design solutions to the satisfaction of multi-objective requirements and unlimited freedom to search alternative solutions (Duarte, 2001; Caldas, 2006). The computational method developed in this paper consists of 1) definition of a prototype, 2) parametric variation, 3) manual deformation, and 4) simulation based deformation. The definition of a prototype is the development of a basic design to be transformed for satisfying various conditions given from a site. In this paper, the bus stop prototype is developed from the analysis of more than 300 bus stops and the categorization of the existing bus stops according to their physical conditions, contextual conditions, climatic conditions, and existing amenities. Based upon the outcome of the analysis, the design variables of a bus stop prototype are defined. Those design variables then guide the basic physical parameters for changing the physical configuration of the prototype according to a given site. From this, many possible design outcomes are generated as instances for further developments. The process of manual deformation is where the designer employs its intuition to develop the selected parametric variation. The designer is compelled to think about the possible implication derived from formal variation. This optional process allows every design decision to have a creative solution from an individual designer with an incidental quality in aesthetics, but substantiated functional quality. Finally the deformation of the selection is guided and controlled by the influence of sun direction/ exposure to the selection. The simulation based deformation starts with the movement of the sun as the trigger for generating the variations of the bus stop prototype. The implementation of the computational method was made within the combination of MEL (Maya Enbedded Language), autodesk MAYA and Ecotect environment.
keywords	mass-customization, parametric variation, simulation based deformation
series	CAAD Futures
email
last changed	2012/02/11 19:21

_id	cf2003_m_054
id	cf2003_m_054
authors	TAN, Milton
year	2003
title	Emergent Relations Self-Indexing Media for Case-Based Reasoning
source	Digital Design - Research and Practice [Proceedings of the 10th International Conference on Computer Aided Architectural Design Futures / ISBN 1-4020-1210-1] Tainan (Taiwan) 13–15 October 2003, pp. 73-82
summary	A priori indexing systems for case-based reasoning are unlikely to engender interesting, let alone creative, explorations. The problem is that they assume a predetermined knowledge and conceptual structure which neglect new and emergent relations. By allowing multiple labelling of entities, it can be shown that different orders of emergent relations can be derived on the fly without any conventional classification schemes. This gives a flexible, scalable, and most importantly, an associative reasoning system that is more likely to trigger interesting concepts which are technically “categorical errors” but seeds of creative thought.
keywords	case-based reasoning, creativity, emergence
series	CAAD Futures
last changed	2003/09/22 12:21

_id	caadria2003_c4-3
id	caadria2003_c4-3
authors	Belblidia, S. and Alby, E.
year	2003
title	Implicit Handling of Geometric Relations in an Existing Modeler
source	CAADRIA 2003 [Proceedings of the 8th International Conference on Computer Aided Architectural Design Research in Asia / ISBN 974-9584-13-9] Bangkok Thailand 18-20 October 2003, pp. 613-622
doi	https://doi.org/10.52842/conf.caadria.2003.613
summary	This paper presents a constraint-based modeling system, integrated into a widely used CAD modeler. Using a notification mechanism, the system records the precision functions called by the user in order to maintain geometric relations between points locations and source objects. These relations are stored in a directed graph which allows an automatic update of the model.
series	CAADRIA
email
last changed	2022/06/07 07:54

_id	ijac20031107
id	ijac20031107
authors	Berridge, Philip; Koch, Volker; Brown, Andre G.P.
year	2003
title	Information Spaces for Mobile City Access
source	International Journal of Architectural Computing vol. 1 - no. 1
summary	This paper describes two complementary European research projects that share common interests and goals.The work described is intended to facilitate city analysis and support decision-making. The first project focuses on the distribution, access and ease of use of city data. The system allows access to historical data concerning key buildings in Liverpool, England, via a suite of web-based tools and a palmtop device. The second project looks at extending the functionality of traditional computer aided design (CAD) software to enable geometric and semantic data to be combined within a single environment. The system allows those involved in city planning to better understand the past and present development pattern of an area so that their decisions on future proposals are better informed.The paper concludes by describing a system that integrates particular aspects of the two projects, and the potential that this integration can bring.This new work provides mobile access to historical city development data, current city information and tools to support urban project development.
series	journal
more	http://www.multi-science.co.uk/ijac.htm
last changed	2007/03/04 07:08

_id	caadria2003_a1-1
id	caadria2003_a1-1
authors	Burrow, A., Burry, J., More, G., Tengono, Y. and Burry, M.
year	2003
title	Visual and Sonic Communication Representations to Support Design Interaction
source	CAADRIA 2003 [Proceedings of the 8th International Conference on Computer Aided Architectural Design Research in Asia / ISBN 974-9584-13-9] Bangkok Thailand 18-20 October 2003, pp. 29-42
doi	https://doi.org/10.52842/conf.caadria.2003.029
summary	Interaction between collaborating parties exerts strong and surprising forces on the design process and thus its outcomes. Hence, there is much to be gained by investigating the nature of these communications. By definition, an organisation establishes clear protocols to realise effective communication, and does so in response to business needs. In contrast, creative endeavours must often harness loose teams of specialised individuals, working in different contexts, disciplines, and language bases, and relying on nonformalised yet highly selective exchanges of information. It is therefore a considerable challenge to comprehend and improve these processes. One approach is to exploit the discrete information contained within digital communications to produce models of these complex conditions. This paper reports preliminary work to identify the components of an email visualisation system. The goal is to apprehend developing structures, providing the collective with the capacity for reflection.
series	CAADRIA
email
last changed	2022/06/07 07:54

_id	cf2003_m_105
id	cf2003_m_105
authors	CHASE, Scott C.
year	2003
title	A Prototype Generative System for Construction Details Combining FBS Descriptions with Design Grammars
source	Digital Design - Research and Practice [Proceedings of the 10th International Conference on Computer Aided Architectural Design Futures / ISBN 1-4020-1210-1] Tainan (Taiwan) 13–15 October 2003, pp. 413-422
summary	A formal framework for redesign based upon Function-Behaviour-Structure models and design grammars is described. A proposed application domain is for the design and redesign of construction assemblies. GDL object technology is illustrated as a candidate tool for implementation.
keywords	construction, grammar, geometric description, redesign
series	CAAD Futures
email
last changed	2003/09/22 12:21

_id	cf_2003_000
id	cf_2003_000
authors	Chiu, M.-L., Tsou, J.-Y., Kvan, Th., Morozumi, M. and Jeng, T.-S. (Eds.)
year	2003
title	Digital Design - Research and Practice
source	Proceedings of the 10th International Conference on Computer Aided Architectural Design Futures / ISBN 1-4020-1210-1 / Tainan (Taiwan) 13–15 October 2003, 464 p.
summary	The use of computers in the design of the built environment has reached a watershed. From peripheral devices in the design process, they have in recent years come to take centre stage. An illustration is immediately at hand. Just as the entries to the competition for the Chicago Tribune Tower in 1922 defined the state-of-the-art at the beginning of the twentieth century, we have a similar marker at the end of the century, the competition in 2002 to replace the World Trade Centre towers in Lower Manhattan offered us a range of architectural solutions that exemplified the state-of-the-art eighty years later, setting forth not only architectural statements but also illustrating clearly the importance of computers in the design of the built environment. In these entries of 2002, we can see that computers have not only become essential to the communication of design but in the investigation and generation of structure, form and composition. The papers in this book are the current state-of-the-art in computer-aided design as it stands in 2003. It is the tenth in a series sponsored by the CAAD Futures Foundation, compiled from papers presented at the biennial CAAD Futures Conferences. As a series, the publications have charted the steady progress in developing the theoretical and practical foundations for applications in design practice. This volume continues in that tradition; thus, this book is entitled Digital Design: Research and Practice. The papers are grouped into three major categories, reflecting thrusts of research and practice, namely: Data and information: its organisation, handling and access, including agents; Virtual worlds: their creation, application and interfaces; and Analysis and creation of form and fabric. The editors received 121 abstracts after the initial call for contributions. From these, 61 abstracts were selected for development into complete papers for further review. From these submissions, 39 papers were chosen for inclusion in this publication. These papers show that the field has evolved from theoretical and development concerns to questions of practice in the decade during which this conference has showcased leading work. Questions of theoretical nature remain as the boundaries of our field expand. As design projects have grasped the potentials of computer-aided design, so have they challenged the capabilities of the tools. Papers here address questions in geometric representation and manipulation (Chiu and Chiu; Kocaturk, Veltkamp and Tuncer), topics that may have been considered to be solved. As design practice becomes increasingly knowledge based, better ways of managing, manipulating and accessing the complex wealth of design information becomes more pressing, demanding continuing research in issues such as modelling (Yang; Wang; Zreik et al), data retrieval and querying (Hwang and Choi; Stouffs and Cumming; Zreik, Stouffs, Tuncer, Ozsariyildiz and Beheshti), new modes of perceiving data (Segers; Tan). Tools are needed to manage, mine and create information for creative work, such as agents (Liew and Gero; Smith; Caneparo and Robiglio; Ding et al) or to support design processes (Smith; Chase). Systems for the support and development of designs continue (Gero; Achten and Jessurun). As progress is made on some fronts, such as user interfaces, attention is again turned to previously research areas such as lighting (Jung, Gross and Do; Ng et al; Wittkopf; Chevier; Glaser, Do and Tai) or services (Garcia; Chen and Lin). In recent years the growth of connectivity has led to a rapid growth in collaborative experience and understanding of the opportunities and issues continues to mature (Jabi; Dave; Zamenopoulos and Alexiou). Increasing interest is given to implications in practice and education (Dave; Oxman; Caneparo, Grassi and Giretti). Topics new to this conference are in the area of design to production or manufacture (Fischer, Burry and Frazer; Shih). Three additional invited papers (Rekimoto; Liu; Kalay) provide clear indication that there is still room to develop new spatial concepts and computer augmented environments for design. In conclusion, we note that these papers represent a good record of the current state of the evolving research in the field of digital design.
series	CAAD Futures
email
more	http://www.caadfutures.arch.tue.nl/
last changed	2003/09/22 12:21

_id	caadria2003_b4-2
id	caadria2003_b4-2
authors	Choi, Jin Won and Park, Jae Wan
year	2003
title	Developing a Building Design Compiler that Frequently evaluates Building Design Performance within the Design Process
source	CAADRIA 2003 [Proceedings of the 8th International Conference on Computer Aided Architectural Design Research in Asia / ISBN 974-9584-13-9] Bangkok Thailand 18-20 October 2003, pp. 553-566
doi	https://doi.org/10.52842/conf.caadria.2003.553
summary	This paper demonstrates an experience in the development of a design performance evaluation system that can frequently evaluate building design performance within the design process in a real-time manner. The evaluation system, that we call "design compiler," is composed of several modules such as a front-end component-based CAD engine, a knowledge base, and a set of design agents. The notion of the design compiler is quite similar to a compiler for computer programming such as a C compiler. While a computer programmer compiles a set of programming codes to check compiling errors during the implementation of a software system, an architectural designer can 'compile' his/her intermediate design product to evaluate design errors during the design process. The compilation can be done immediately at any level or any time during the design process in a real-time manner. We expect that this compiling process will dramatically increase design feedbacks, and thus result in a better design product. Further research issues that have been identified at the end of the research include increasing the modeling capability, extending to multi-story building representation, developing various design agents, exploring better ways to request and manage design knowledge, and supporting design collaboration.
series	CAADRIA
email
last changed	2022/06/07 07:56

_id	cf2003_m_056
id	cf2003_m_056
authors	De GRASSI, M., GIRETTI, A., BAZZANELLA, L and CANEPARO, L.
year	2003
title	The AEC Virtual University - Design Oriented Knowledge Transfer Methods and Technologies
source	Digital Design - Research and Practice [Proceedings of the 10th International Conference on Computer Aided Architectural Design Futures / ISBN 1-4020-1210-1] Tainan (Taiwan) 13–15 October 2003, pp. 313-323
summary	The paper introduces the Web based INtelligent Design Support (WINDS) European Project to support education in design, a.k.a. the AEC Virtual University. The Project is divided into two actions. First, the research technology action will implement a learning environment integrating an intelligent design tutoring system, a computer instruction management system and a set of co-operative supporting tools. Second, the development action will build a large knowledge base supporting Architecture, Civil Engineering and Construction Design Courses and to experiment a comprehensive AEC Virtual University.
keywords	design pedagogy, case-based teaching, e-learning, goal-based scenario, knowledge-based
series	CAAD Futures
email
last changed	2003/09/22 12:21

_id	ecaade2023_000
id	ecaade2023_000
authors	Dokonal, Wolfgang, Hirschberg, Urs and Wurzer, Gabriel
year	2023
title	eCAADe 2023 Digital Design Reconsidered - Volume 1
source	Dokonal, W, Hirschberg, U and Wurzer, G (eds.), Digital Design Reconsidered - Proceedings of the 41st Conference on Education and Research in Computer Aided Architectural Design in Europe (eCAADe 2023) - Volume 1, Graz, 20-22 September 2023, 905 p.
doi	https://doi.org/10.52842/conf.ecaade.2023.1.001
summary	The conference logo is a bird’s eye view of spiral stairs that join and separate – an homage to the famous double spiral staircase in Graz, a tourist attraction of this city and a must-see for any architecturally minded visitor. Carved out of limestone, the medieval construction of the original is a daring feat of masonry as well as a symbolic gesture. The design speaks of separation and reconciliation: The paths of two people that climb the double spiral stairs separate and then meet again at each platform. The relationship between architectural design and the growing digital repertoire of tools and possibilities seems to undergo similar cycles of attraction and rejection: enthusiasm about digital innovations – whether in Virtual Reality, Augmented Reality, Energy Design, Robotic Fabrication, the many Dimensions of BIM or, as right now, in AI and Machine Learning – is typically followed by a certain disillusionment and a realization that the promises were somewhat overblown. But a turn away from these digital innovations can only be temporary. In our call for papers we refer to the first and second ‘digital turns’, a term Mario Carpo coined. Yes, it’s a bit of a pun, but you could indeed see these digital turns in our logo as well. Carpo would probably agree that design and the digital have become inseparably intertwined. While they may be circling in different directions, an innovative rejoinder is always just around the corner. The theme of the conference asked participants to re-consider the relationship between Design and the Digital. The notion of a cycle is already present in the syllable “re”. Indeed, 20 years earlier, in 2003, we held an ECAADE conference in Graz simply under the title “Digital Design” and our re-using – or is it re-cycling? – the theme can be seen as the completion of one of those cycles described above: One level up, we meet again, we’ve come full circle. The question of the relationship between Design and the Digital is still in flux, still worthy of renewed consideration. There is a historical notion implicit in the theme. To reconsider something, one needs to take a step back, to look into the past as well as into the future. Indeed, at this conference we wanted to take a longer view, something not done often enough in the fast-paced world of digital technology. Carefully considering one’s past can be a source of inspiration. In fact, the double spiral stair that inspired our conference logo also inspired many architects through the ages. Konrad Wachsmann, for example, is said to have come up with his famous Grapevine assembly system based on this double spiral stair and its intricate joinery. More recently, Rem Koolhaas deemed the double spiral staircase in Graz important enough to include a detailed model of it in his “elements of architecture” exhibition at the Venice Biennale in 2014. Our interpretation of the stair is a typically digital one, you might say. First of all: it’s a rendering of a virtual model; it only exists inside a computer. Secondly, this virtual model isn’t true to the original. Instead, it does what the digital has made so easy to do: it exaggerates. Where the original has just two spiral stairs that separate and join, our model consists of countless stairs that are joined in this way. We see only a part of the model, but the stairs appear to continue in all directions. The implication is of an endless field of spiral stairs. As the 3D model was generated with a parametric script, it would be very easy to change all parameters of it – including the number of stairs that make it up. Everyone at this conference is familiar with the concept of parametric design: it makes generating models of seemingly endless amounts of connected spiral stairs really easy. Although, of course, if we’re too literal about the term ‘endless’, generating our stair model will eventually crash even the most advanced computers. We know that, too. – That's another truth about the Digital: it makes a promise of infinity, which, in the end, it can’t keep. And even if it could: what’s the point of just adding more of the same: more variations, more options, more possible ways to get lost? Doesn’t the original double spiral staircase contain all those derivatives already? Don’t we know that ‘more’ isn’t necessarily better? In the original double spiral stair the happy end is guaranteed: the lovers’ paths meet at the top as well as when they exit the building. Therefore, the stair is also colloquially known as the Busserlstiege (the kissing stair) or the Versöhnungsstiege (reconciliation stair). In our digitally enhanced version, this outcome is no longer clear: we can choose between multiple directions at each level and we risk losing sight of the one we were with. This is also emblematic of our field of research. eCAADe was founded to promote “good practice and sharing information in relation to the use of computers in research and education in architecture and related professions” (see ecaade.org). That may have seemed a straightforward proposition forty years ago, when the association was founded. A look at the breadth and depth of research topics presented and discussed at this conference (and as a consequence in this book, for which you’re reading the editorial) shows how the field has developed over these forty years. There are sessions on Digital Design Education, on Digital Fabrication, on Virtual Reality, on Virtual Heritage, on Generative Design and Machine Learning, on Digital Cities, on Simulation and Digital Twins, on BIM, on Sustainability, on Circular Design, on Design Theory and on Digital Design Experimentations. We hope you will find what you’re looking for in this book and at the conference – and maybe even more than that: surprising turns and happy encounters between Design and the Digital.
series	eCAADe
email
last changed	2023/12/10 10:49

_id	ecaade2023_001
id	ecaade2023_001
authors	Dokonal, Wolfgang, Hirschberg, Urs and Wurzer, Gabriel
year	2023
title	eCAADe 2023 Digital Design Reconsidered - Volume 2
source	Dokonal, W, Hirschberg, U and Wurzer, G (eds.), Digital Design Reconsidered - Proceedings of the 41st Conference on Education and Research in Computer Aided Architectural Design in Europe (eCAADe 2023) - Volume 2, Graz, 20-22 September 2023, 899 p.
doi	https://doi.org/10.52842/conf.ecaade.2023.2.001
summary	The conference logo is a bird’s eye view of spiral stairs that join and separate – an homage to the famous double spiral staircase in Graz, a tourist attraction of this city and a must-see for any architecturally minded visitor. Carved out of limestone, the medieval construction of the original is a daring feat of masonry as well as a symbolic gesture. The design speaks of separation and reconciliation: The paths of two people that climb the double spiral stairs separate and then meet again at each platform. The relationship between architectural design and the growing digital repertoire of tools and possibilities seems to undergo similar cycles of attraction and rejection: enthusiasm about digital innovations – whether in Virtual Reality, Augmented Reality, Energy Design, Robotic Fabrication, the many Dimensions of BIM or, as right now, in AI and Machine Learning – is typically followed by a certain disillusionment and a realization that the promises were somewhat overblown. But a turn away from these digital innovations can only be temporary. In our call for papers we refer to the first and second ‘digital turns’, a term Mario Carpo coined. Yes, it’s a bit of a pun, but you could indeed see these digital turns in our logo as well. Carpo would probably agree that design and the digital have become inseparably intertwined. While they may be circling in different directions, an innovative rejoinder is always just around the corner. The theme of the conference asked participants to re-consider the relationship between Design and the Digital. The notion of a cycle is already present in the syllable “re”. Indeed, 20 years earlier, in 2003, we held an ECAADE conference in Graz simply under the title “Digital Design” and our re-using – or is it re-cycling? – the theme can be seen as the completion of one of those cycles described above: One level up, we meet again, we’ve come full circle. The question of the relationship between Design and the Digital is still in flux, still worthy of renewed consideration. There is a historical notion implicit in the theme. To reconsider something, one needs to take a step back, to look into the past as well as into the future. Indeed, at this conference we wanted to take a longer view, something not done often enough in the fast-paced world of digital technology. Carefully considering one’s past can be a source of inspiration. In fact, the double spiral stair that inspired our conference logo also inspired many architects through the ages. Konrad Wachsmann, for example, is said to have come up with his famous Grapevine assembly system based on this double spiral stair and its intricate joinery. More recently, Rem Koolhaas deemed the double spiral staircase in Graz important enough to include a detailed model of it in his “elements of architecture” exhibition at the Venice Biennale in 2014. Our interpretation of the stair is a typically digital one, you might say. First of all: it’s a rendering of a virtual model; it only exists inside a computer. Secondly, this virtual model isn’t true to the original. Instead, it does what the digital has made so easy to do: it exaggerates. Where the original has just two spiral stairs that separate and join, our model consists of countless stairs that are joined in this way. We see only a part of the model, but the stairs appear to continue in all directions. The implication is of an endless field of spiral stairs. As the 3D model was generated with a parametric script, it would be very easy to change all parameters of it – including the number of stairs that make it up. Everyone at this conference is familiar with the concept of parametric design: it makes generating models of seemingly endless amounts of connected spiral stairs really easy. Although, of course, if we’re too literal about the term ‘endless’, generating our stair model will eventually crash even the most advanced computers. We know that, too. – That's another truth about the Digital: it makes a promise of infinity, which, in the end, it can’t keep. And even if it could: what’s the point of just adding more of the same: more variations, more options, more possible ways to get lost? Doesn’t the original double spiral staircase contain all those derivatives already? Don’t we know that ‘more’ isn’t necessarily better? In the original double spiral stair the happy end is guaranteed: the lovers’ paths meet at the top as well as when they exit the building. Therefore, the stair is also colloquially known as the Busserlstiege (the kissing stair) or the Versöhnungsstiege (reconciliation stair). In our digitally enhanced version, this outcome is no longer clear: we can choose between multiple directions at each level and we risk losing sight of the one we were with. This is also emblematic of our field of research. eCAADe was founded to promote “good practice and sharing information in relation to the use of computers in research and education in architecture and related professions” (see ecaade.org). That may have seemed a straightforward proposition forty years ago, when the association was founded. A look at the breadth and depth of research topics presented and discussed at this conference (and as a consequence in this book, for which you’re reading the editorial) shows how the field has developed over these forty years. There are sessions on Digital Design Education, on Digital Fabrication, on Virtual Reality, on Virtual Heritage, on Generative Design and Machine Learning, on Digital Cities, on Simulation and Digital Twins, on BIM, on Sustainability, on Circular Design, on Design Theory and on Digital Design Experimentations. We hope you will find what you’re looking for in this book and at the conference – and maybe even more than that: surprising turns and happy encounters between Design and the Digital.
series	eCAADe
type	normal paper
email
last changed	2024/08/29 08:36

_id	ecaade03_665_181_duarte
id	ecaade03_665_181_duarte
authors	Duarte, José P.
year	2003
title	A Discursive Grammar for Customizing Mass Housing - The case of Siza´s houses at Malagueira
source	Digital Design [21th eCAADe Conference Proceedings / ISBN 0-9541183-1-6] Graz (Austria) 17-20 September 2003, pp. 665-674
doi	https://doi.org/10.52842/conf.ecaade.2003.665
summary	The ultimate goal of the described research is a process for mass customizing housing based on computer-aided design and production systems. The current goal is the development of an interactive system for generating solutions on the Web based on a modeling approach called discursive grammar. A discursive grammar consists of a programming grammar and a designing grammar. The programming grammar generates design briefs based on user data; the designing grammar provides the rules for generating designs in a particular style, and a set of heuristics guides the generation of designs towards a solution that matches the design brief. This paper describes the designing grammar using Siza´s houses at Malagueira as a case study.
keywords	Mass customization: housing; grammars; Siza; design automation
series	eCAADe
email
more	http://www.civil.ist.utl.pt/~jduarte/malag/
last changed	2022/06/07 07:55

_id	cf2003_m_005
id	cf2003_m_005
authors	FISCHER, T., BURRY, M. and FRAZER, J.
year	2003
title	How to Plant a Subway System
source	Digital Design - Research and Practice [Proceedings of the 10th International Conference on Computer Aided Architectural Design Futures / ISBN 1-4020-1210-1] Tainan (Taiwan) 13–15 October 2003, pp. 403-412
summary	We speculate on a possible CAAD future that deploys and extends paradigms of natural growth and cellular development to an extent that would allow the planting and growth of man-made structures. This approach is based on the translation and expression of digital data structures into artificial physical form and the building of structures by decentral means. In such a scenario, generative and evolutionary architecture could seamlessly blend into building construction. As a discussion of as yet unavailable future technologies and methodologies the proposed remains at a “sketchy” level and must largely limit itself to preliminary and speculative considerations. In order to restrain the scope of this paper to the area of building design and construction, we focus on subway development and discuss possible cellular approaches to this particular field emphasizing aspects of functional aesthetics. We encourage the reader to take this example as a point of departure only, to generalise our explanations and to apply them to other building types. We support our discussion with findings made in software simulations of humandesigned cellular growth processes.
keywords	cellular, evolutionary, morphogenesis, subway
series	CAAD Futures
email
last changed	2003/09/22 12:21

_id	cf2003_m_046
id	cf2003_m_046
authors	HWANG, Jie-Eun and CHOI, Jin-Won
year	2003
title	SpaceScope: Spatial Content-Based Retrieval of Architectural Floor Plans
source	Digital Design - Research and Practice [Proceedings of the 10th International Conference on Computer Aided Architectural Design Futures / ISBN 1-4020-1210-1] Tainan (Taiwan) 13–15 October 2003, pp. 53-62
summary	This research investigates spatial information retrieval in architecture, based on an efficient metadata that is crucial for content-based retrieval. SpaceCore is the metadata schema for spatial information on a floor plan implemented with RDF (Resource Description Framework). To generate metadata, we analyse the factors of spatial information, and then construct a data model containing the content and structure of spatial information. To exploit the metadata, we suggest various query operations with possible predicates and interfaces. SpaceScope, the spatial information retrieval system, consists of three modules: an input data module, a query module, and a browse module. As to implementation, we have already developed the real time plan-structuring system, called “Vitruvius”, as an inputting and modelling data module (using C++). Based on the database, the system performs the similarity analysis and then evaluates the alternative plans with the retrieval goals. At the end of the paper we discuss the potential of SpaceScope in the schematic design stage of the architectural design process, possibly improving and triggering the designer’s conceptual approach against a logical background and facilitate rapid decision-making after full consideration.
keywords	case-based reasoning, content-based retrieval, metadata, RDF, semantic
series	CAAD Futures
last changed	2003/09/22 12:21

_id	cf2003_m_022
id	cf2003_m_022
authors	JABI, Wassim
year	2003
title	Reflections on Computer-Supported Cooperative Design Systems
source	Digital Design - Research and Practice [Proceedings of the 10th International Conference on Computer Aided Architectural Design Futures / ISBN 1-4020-1210-1] Tainan (Taiwan) 13–15 October 2003, pp. 169-180
summary	Computer-supported cooperative work has come to signify a process by which a computer system supports the activities of geographically dispersed participants and enables them to share ideas and artefacts. This paper aims to dispel this unified approach to the definition of and in turn the design of aids to cooperative work. The paper starts by surveying the history of the field of computer-supported cooperative work and design. Then, the paper presents three tasks and their associated aids. The first system helps designers to create and discuss a hierarchical building program and share schematic drawings. The second system allows a jury to anonymously review a set of submissions. The third system allows a hierarchically organised group of participants to search, retrieve, organise and share a set of digital media assets. All systems are web-based and use the same underlying object-oriented technology. The paper provides a brief case study that describes the main features of the three pieces of software as an example of the need for a variety of approaches in the support of cooperative work and design. The paper concludes by advocating an object-oriented, domain-specific approach to creating computer-supported cooperative systems based on the analysis of the task at hand.
keywords	collaboration, groupware
series	CAAD Futures
email
last changed	2003/09/22 12:21

_id	avocaad_2003_01
id	avocaad_2003_01
authors	Jack Breen
year	2003
title	VISTA VERSA – Critical Considerations on the Evolvement of Designerly Attitudes, Instruments and Networks in Design Driven Studies
source	LOCAL VALUES in a NETWORKED DESIGN WORLD - ADDED VALUE OF COMPUTER AIDED ARCHITECTURAL DESIGN, Stellingwerff, Martijn and Verbeke, Johan (Eds.), (2004) DUP Science - Delft University Press, ISBN 90-407-2507-1.
summary	Keynote Paper - We are all involved in design.Besides being the (sub)conscious recipients of all sorts of design driven activities, we are professionally concerned with products of design and acts of designing, either as practitioners or as academics, in some cases as both… As someone who was trained as a designer, drifted into design teaching and presently attempts to combine composition research with design practice, I feel there is a need to bridge the cultural gap between design and design research. I intend to put forward the case for more designerly approaches in the study of design. In this context I would like to discuss perspectives for design driven studies by considering the following ensemble of aspects:- the matter of shifting attitudes to design in a scientific context; - the necessity of expanding the scope of instruments of design in relation to methods and insights. - the furthering of opportunities for networks aimed at bringing out and communicating findings concerning different aspects of design.It is on the topic of interaction, between the targeted creativity of designing on the one hand and the open minded search for relevant knowledge, insights and applications on the other, that I would like to dwell. Furthermore, I hope to provoke some thoughts – and hopefully responses – concerning the roles of computer based applications in such studies. What kinds of impulses have computer technologies offered, should they perhaps have offered and indeed might they still be able to offer in this field? I would like to by take a critical look back and try to turn things around, towards a possible view forward…
keywords	Architecture, Local values, Globalisation, Computer Aided Architectural Design
series	AVOCAAD
email
last changed	2006/01/16 21:38

_id	cf2003_m_062
id	cf2003_m_062
authors	JUNG, T., GROSS, M. D. and DO, E. Y.-L.
year	2003
title	Light Pen - Sketching Light in 3D
source	Digital Design - Research and Practice [Proceedings of the 10th International Conference on Computer Aided Architectural Design Futures / ISBN 1-4020-1210-1] Tainan (Taiwan) 13–15 October 2003, pp. 327-338
summary	We describe a lighting design system driven by sketching on 3D virtual models. Conventional lighting design tools simulate the lighting effects of design decisions such as window locations, surface treatments, and fixture placement. Light Pen takes the inverse approach by allowing the designer to indicate desired illumination on a 3D model. This serves as input to a knowledge-based lighting design system, which recommends what lights to use and where to place them, based on the designer's expressed intentions and on the geometry of the space.
keywords	knowledge-based, lighting, sketch, virtual environment
series	CAAD Futures
email
last changed	2004/10/04 07:49

_id	caadria2003_c6-2
id	caadria2003_c6-2
authors	Li Suping, Joo-Hwa Bay
year	2003
title	A Cognitive Framework of Collaborative Design Between Architects and Manufacturer-Designers
source	CAADRIA 2003 [Proceedings of the 8th International Conference on Computer Aided Architectural Design Research in Asia / ISBN 974-9584-13-9] Bangkok Thailand 18-20 October 2003, pp. 855-870
doi	https://doi.org/10.52842/conf.caadria.2003.855
summary	The widespread application of prefabricated products in building has made prefabrication an indispensable part of building processes. In this context, instead of handling every detail by architects themselves, some parts of architectural design have been transferred to manufacturer-designers. This inevitably brings about problems in the integration of prefabricated products and the specific buildings they serve. As a result, collaboration between architects and manufacturer-designers takes place in building processes in various forms and extents (non-, semi-, and full-collaboration). In this study, we aim to investigate collaborative design process from the cognitive aspect of design generation between architects and manufacturer-designers in terms of project-related products design. By applying the Kernel of Conceptual System theory (Tzonis et al., 1978), we intend to set up two empirical models in terms of design differences' formation in collaborative design process based on a case study with seeking the answers for the following research questions: 1. What kinds of design differences are raised in design processes? 2. Why the design differences are raised in design processes? 3. What implications could be made in developing computational models to facilitate collaborative design between architects and manufacturer-designers?
series	CAADRIA
email
last changed	2022/06/07 07:52

For more results click below: