Cumincad : CUMINCAD Papers : Search Results

CumInCAD is a Cumulative Index about publications in Computer Aided Architectural Design
supported by the sibling associations ACADIA, CAADRIA, eCAADe, SIGraDi, ASCAAD and CAAD futures

PDF papers
References

Hits 1 to 20 of 517

Reformat results as: short short into frame detailed detailed into frame

_id	heylighenieee2003
id	HeylighenIEEE2003
authors	Heylighen, A., Neuckermans, H. and Morisse, P.
year	2003
title	What You See is What You Get
source	IEEE Multimedia, July-Sept 2003, Vol. 10, No. 3, pp. 48-56
summary	As the amount of visual information stored on electronic media grows, the need for appropriate access mechanisms becomes more critical. Information system developers in fields as varied as agriculture, medicine, and security must not only create systems to represent, store, and process visual content, but also re-examine the indexing procedure and conceive interfaces that make visual information easily accessible. Architectural design, a field overrun by myriad case libraries, manifests this challenge. Cases – specific designs from the past – are a significant source of knowledge in the architectural design field. Using current information technologies, researchers in this field have created a variety of multimedia case collections, storing them on CD-ROM, local networks, and the Internet. Several tools for accessing case collections exist; however most rely on verbal descriptions to index cases. For the collections to support architects during design, cases should not only be represented visually, but should also be accessible through a visual medium. We’ve developed a working prototype of a visual indexing and access mechanism that uses visual keys – small pictogram-like icons expressing an architectural feature. Users can consult an online case base using these keys or create new keys to label and link cases. A pilot study, in which student and professional architects used and evaluated the prototype, supports the need for such a mechanism.
series	journal paper
email
last changed	2004/03/25 17:55

_id	acadia03_034
id	acadia03_034
authors	Luhan, G.A., Bhavsar, S. and Walcott, B.L.
year	2003
title	Deep-Time ProbeInvestigations in Light Architecture
doi	https://doi.org/10.52842/conf.acadia.2003.258
source	Connecting >> Crossroads of Digital Discourse [Proceedings of the 2003 Annual Conference of the Association for Computer Aided Design In Architecture / ISBN 1-880250-12-8] Indianapolis (Indiana) 24-27 October 2003, pp. 258-266
summary	This paper presentation presents an interdisciplinary research project conducted by a design team comprised of faculty from the Colleges of Architecture, Engineering, and Astrophysics. The title of the project, Deep-Time Probe, Investigations in Light-Architecture, explores the use of an optically active-SETI experiment that centers on the thematic of time, vision, and movement through space. The realm of architecture was the digital glue that united the varied disciplines. The core of the project is broken down into three intrinsically linked components—data representation—collection, storage, and modulation; the Project Mission Wall; and the resultant Light Architecture or Deep-Time Probe. A small team of architecture students under the direction of one architecture faculty member designed the Mission Wall while the Robotics Department provided CNC machinery to digitally mill and fabricate its components. This same team assembled the 40’x60’x15’ structure in one day. The site of the launch created an adequate interface for the public art structure at the scale of an urban park. The scale of the Mission Wall addressed a variety of places, paces, and scales that mediated between the laser, the context of the surrounding plaza, and pedestrian and vehicular circulation, all while concealing the laser from direct view. The Mission Wall served three functions. It provided a housing for the Deep-Time Probe laser. It created windows and scaffolding for lighting. Moreover, it established a series of “View Corridors” that provided the onlooker with multiple vantage points and thus multiple-readings of information as architecture. Nearly fifty “Time Probe Reporters” gathered information through oral interviews. In addition to messages linked to the interviews, the Deep-Time Probe contained verbal and graphic information, images depicting the design and fabrication processes. At the time of the launch, the design team digitized, specially formatted, converted, and modulated the data into a special high-powered laser that was “launched” into space. An advanced civilization in the universe could theoretically receive and decode this information. The Deep-Time Probe project visualized the strengths of each profession, fostered the creative aspects of each team member, and resulted in a unique and dynamic experience. The deep time probe is right now passing through the Oort Cloud, the debris left over from the formation of our Sun and planets, present as a halo surrounding our solar system . . . a distance of nearly 1.5 trillion miles.
keywords	Interdisciplinary Design Research, Information Visualization, and Fabrication
series	ACADIA
email
last changed	2022/06/07 07:59

_id	cf2003_m_024
id	cf2003_m_024
authors	SEGERS, Nicole S. and de VRIES, Bauke
year	2003
title	The Idea Space System - Words as Handles to a Comprehensive Data Structure
source	Digital Design - Research and Practice [Proceedings of the 10th International Conference on Computer Aided Architectural Design Futures / ISBN 1-4020-1210-1] Tainan (Taiwan) 13–15 October 2003, pp. 31-40
summary	The Idea Space System is a CAAD system that supports an architect in the early phase of the design process, by reducing fixation in the process and enhancing the ‘flow’ of work. Mostly in the field of CAAD research, the emphasis lies on sketching or modelling. However the architect uses multiple representations in developing the design. In this research the focus lies on the use of words. The Idea Space System captures all design data and then uses the words to provide the architect with new associations and relations between words (real time), which stimulate the generation of new ideas. Architecture students have used our first prototype of the Idea Space System in a small experiment. This gave us better insight in the ideas and relations made by the architect in the early phase of the design process and what kind of feedback preferred. Afterwards a study was done about the representation of the feedback. In this paper we focus on the textual input provided by the architecture students and the description of the Idea Space System, handling this textual input and providing the architecture students with the proper feedback.
keywords	conceptual, information modelling, design thinking, text
series	CAAD Futures
email
last changed	2003/11/22 07:23

_id	cf2011_p163
id	cf2011_p163
authors	Park, Hyoung-June
year	2011
title	Mass-Customization in the Design of 4,000 Bus Stops
source	Computer Aided Architectural Design Futures 2011 [Proceedings of the 14th International Conference on Computer Aided Architectural Design Futures / ISBN 9782874561429] Liege (Belgium) 4-8 July 2011, pp. 265-278.
summary	In Hawaii, ‚"TheBus‚" has been a main transportation system since 1971. Considering the high cost of living in Hawaii and the absence of a rail system, the use of ‚"TheBus‚" has been an instrumental vein of the city life in Honolulu with rhythmical pauses at about 4,000 bus stops in Honolulu. However, existing undifferentiated bus stops are developed from a cost effective mass production system so that they have been problematic for satisfying specific needs from various site conditions. In this research, an integrated computational method of mass-customization for designing 4,000 bus stops is introduced. According to various site conditions, the design of each bus stop is customized. Unlike the mass‚Äêproduced bus stops commonly seen in cities today, the proposed computational method in this paper produces bus stop design outcomes that fit into the physical characteristics of the location in which they are installed. Mass-customization allows for the creation and production of unique or similar buildings and building components, differentiated through digitally‚Äêcontrolled variation (Kolarevic, 2003). The employment of a computational mass‚Äêcustomization in architectural design extends the boundary of design solutions to the satisfaction of multi-objective requirements and unlimited freedom to search alternative solutions (Duarte, 2001; Caldas, 2006). The computational method developed in this paper consists of 1) definition of a prototype, 2) parametric variation, 3) manual deformation, and 4) simulation based deformation. The definition of a prototype is the development of a basic design to be transformed for satisfying various conditions given from a site. In this paper, the bus stop prototype is developed from the analysis of more than 300 bus stops and the categorization of the existing bus stops according to their physical conditions, contextual conditions, climatic conditions, and existing amenities. Based upon the outcome of the analysis, the design variables of a bus stop prototype are defined. Those design variables then guide the basic physical parameters for changing the physical configuration of the prototype according to a given site. From this, many possible design outcomes are generated as instances for further developments. The process of manual deformation is where the designer employs its intuition to develop the selected parametric variation. The designer is compelled to think about the possible implication derived from formal variation. This optional process allows every design decision to have a creative solution from an individual designer with an incidental quality in aesthetics, but substantiated functional quality. Finally the deformation of the selection is guided and controlled by the influence of sun direction/ exposure to the selection. The simulation based deformation starts with the movement of the sun as the trigger for generating the variations of the bus stop prototype. The implementation of the computational method was made within the combination of MEL (Maya Enbedded Language), autodesk MAYA and Ecotect environment.
keywords	mass-customization, parametric variation, simulation based deformation
series	CAAD Futures
email
last changed	2012/02/11 19:21

_id	ecaade03_165_201_oxman
id	ecaade03_165_201_oxman
authors	Oxman, Rivka
year	2003
title	Being There: Architectural Metaphors in the Design of Virtual Place
doi	https://doi.org/10.52842/conf.ecaade.2003.165
source	Digital Design [21th eCAADe Conference Proceedings / ISBN 0-9541183-1-6] Graz (Austria) 17-20 September 2003, pp. 165-168
summary	The paper reports on a research program to define the issues and strategies involved in the design of virtual architecture. Issues and categories of virtual architecture are identified and classified. An approach to the design of virtual place is derived from a large body of emerging literature as well as from the analysis of case-studies. We demonstrate and discuss how paradigms of physical design may be applied to support the needs of design for cyber-place. We attempt to define intrinsically digital possibilities for interface design that are not based upon a direct analogy to physical space. The findings in the form of alternative development possibilities and design guidelines may provide a guide to the field of virtual architecture, to its definition, design issues, and potential strategies.
keywords	Cyberspace, cyber-place, virtual architecture
series	eCAADe
email
more	http://www.technion.ac.il/~oxman
last changed	2022/06/07 08:00

_id	caadria2003_c1-3
id	caadria2003_c1-3
authors	Cheng, N. Y. and Lane-Cummings, S.
year	2003
title	Using Mobile Digital Tools for Learning about Places
doi	https://doi.org/10.52842/conf.caadria.2003.145
source	CAADRIA 2003 [Proceedings of the 8th International Conference on Computer Aided Architectural Design Research in Asia / ISBN 974-9584-13-9] Bangkok Thailand 18-20 October 2003, pp. 145-156
summary	To explore how mobile digital tools can bring students out from isolated classrooms, we tested several for use in design studio site visits. We focused on small, off-the-shelf tools that are inexpensive and easy to upgrade. In this paper we identify the logistical, efficiency, and learning considerations for the selection and introduction of mobile digital tools , with observations about device usability and administration that are applicable to other kinds of technology introduction. We found that adoption of a tool depends on several factors, including ease of use and inconspicuous nature. Compared to traditional tools, most of these tools require a great deal of set-up time before students can use them efficiently. In addition, they require docking with a computer to analyze the information collected in the field. As a result, most of the learning takes place in the studio, rather than in the field. Our eventual goal is to clarify the potentials of place-recording tools, making it easier to gather and use a toolkit for specific situations.
series	CAADRIA
email
last changed	2022/06/07 07:55

_id	avocaad_2003_03
id	avocaad_2003_03
authors	Dag Boutsen
year	2003
title	AN INCLUSIVE ‘WORK-METHOD’ AND A SPECIFIC SEARCH FOR FULLY SUPPORTED SOLUTIONS THROUGH SUBJECTORIENTED DESIGN (INSTEAD OF OBJECT-ORIENTED)!
source	LOCAL VALUES in a NETWORKED DESIGN WORLD - ADDED VALUE OF COMPUTER AIDED ARCHITECTURAL DESIGN, Stellingwerff, Martijn and Verbeke, Johan (Eds.), (2004) DUP Science - Delft University Press, ISBN 90-407-2507-1.
summary	This paper talks about the hardness of CAAD.And it talks about the necessity to develop ‘soft’ CAAD.A lot of architectural adventures are stopped in the beginning or the middle of the road. Because of decisions far away from the designers or the clients. These decisions break in against some aspects of the design. Small details often kill a whole design-process.Does architectural design only belong to architects and planners ?To a “Me, myself and I”-world ? For the last 10 years, we have gained a lot of experience of designing architectural landscapes in a specific way. We design in such a way that developing projects can change or evolve strongly within themselves without losing their typical spirit. Change because of external and non-predictable events, change because of unexpected or changing circumstances, change because of the participation of new intervening people….New housing projects in Apeldoorn and Dordrecht,Rehabilitation projects in Gennevilliers (Paris) and Hellersdorf (Berlin), …Schools and hospitals in Amsterdam, …Each time very local aspects are incorporated in the different design-spirits.The networks are similar because of specific design-methods.This paper wants to explain something about this process-spirit.
keywords	Architecture, Local values, Globalisation, Computer Aided Architectural Design
series	AVOCAAD
type	normal paper
email
last changed	2006/01/16 21:38

_id	caadria2003_b6-1
id	caadria2003_b6-1
authors	Howe, A.S., Kang, P. and Nasari, Omid
year	2003
title	Digiosk Digital Design to Robotic Deployment in Two Months
doi	https://doi.org/10.52842/conf.caadria.2003.811
source	CAADRIA 2003 [Proceedings of the 8th International Conference on Computer Aided Architectural Design Research in Asia / ISBN 974-9584-13-9] Bangkok Thailand 18-20 October 2003, pp. 811-826
summary	In this paper, we discuss Kit-of-parts Theory and how it applies to the design, manufacture, and operation of a small robotic deployable demonstration structure called the Digiosk (Howe, 2001). "Kit-of-parts Theory" refers to the study and application of objectoriented building techniques, where building components are predesigned / pre-engineered / pre-fabricated for inclusion in joint-based (linear element), panel-based (planar element), module-based (solid element), and deployable (time element) construction systems. The Digiosk is an exposition display kiosk that was designed and manufactured digitally, and brought from concept to robotic functionality in a short period of time. Using kinematic mechanisms the cylinder opens up and deploys into a 2.7m cubical display booth complete with integral power and network connections. The kiosk was designed using a solid modeler, from which data was extracted to drive digital manufacturing processes. Owing to the well-developed understanding of Kit-of-parts Theory and the new "kinematic architecture" principles, the paperless process yielded a working prototype only eight weeks after initial conceptualization. The paper concludes with a discussion of how these concepts can be applied to large-scale projects and design processes.
series	CAADRIA
email
last changed	2022/06/07 07:50

_id	caadria2007_057
id	caadria2007_057
authors	Kouide, Tahar; G. Paterson
year	2007
title	BIM as a Viable Collaborative Working Tool: A Case Study
doi	https://doi.org/10.52842/conf.caadria.2007.x.l1j
source	CAADRIA 2007 [Proceedings of the 12th International Conference on Computer Aided Architectural Design Research in Asia] Nanjing (China) 19-21 April 2007
summary	For the majority of design practices in the construction industry the use of CAD systems have been used to merely automate hand drafting (Cohen 2003). This is the traditional way of working that has changed very little since the introduction of commercial CAD systems. These practices as means of communication are being replaced by a virtual building model environment which encapsulates all of the information for an entire construction project and thereby enables computer-supported co-operative working practices. (Newton 2003) This study aims to determine whether Building Information Modelling (BIM) can, and whether it will, replace traditional communication media as the standard in the industry for computersupported co-operative working practices in the Architecture Engineering and construction (AEC) sector. The bulk of the research comprises an extensive literature review looking at the principal reasons behind the development of BIM, the potential advantages and drawbacks of the technology, and the barriers and obstacles which inhibit its adoption as a means of computer-supported co-operative working. The findings of the study have been validated and analysed against current practice in the field through a live case study analysis of the on-going Heathrow airport Terminal 5 Project in London (UK). The Terminal 5 case study demonstrates that present software tools, although usable, still present significant implicit technical constraints to wider implementation among Small and Medium Enterprises (SMEs). The case study has also shown that in practice, the success of BIM depends just as much on the working practices and ethos of participants in the project chain as it does on the capabilities of the software itself, in particular the willingness of practitioners to change traditional working practices. The case study has shown that the present investment, in terms of time, cost, and effort required to implementing the technology means that BIM is unlikely to be adopted on small simple projects where conventional CAD is still adequate. It also highlighted that BIM tools currently available are not yet adequately developed to satisfy the requirements of the many procurement and especially contractual arrangements which presently exist and many firms will be frightened off by the unresolved legal issues which may arise from implementing BIM in their practices.
series	CAADRIA
email
last changed	2022/06/07 07:50

_id	2004_292
id	2004_292
authors	Modeen, Thomas
year	2004
title	Using Solid Freeform Fabrication for the Conceptualization and Corporeal Actualization of Architecture
doi	https://doi.org/10.52842/conf.ecaade.2004.292
source	Architecture in the Network Society [22nd eCAADe Conference Proceedings / ISBN 0-9541183-2-4] Copenhagen (Denmark) 15-18 September 2004, pp. 292-301
summary	This paper forms an update to the paper presented ar eCAADe 2003, in Graz. It is a summary of a project which aim is to suggest an alternate methodology for utilizing additive Solid Freeform Fabrication (more commonly known as Rapid Prototyping), for the conceptualization and fabrication of design and architecture. It plans to do so by establishing a methodology that is innate and a direct reflection of the additive SFF production process. The project also aims to address the seemingly divisive discrepancy between the process of digitally conceiving a design and the intrinsically somatic way we perceive it. Whereas the paper in Graz introduced the conceptual foundations and the taxonomy of the project, the aim in this years paper is to present some of the realized designs and discuss, in brief, how what has been learnt could be furthered as the project proceeds. The three designs described in more detail in the paper, all catalyzed by a specific sensory notion, would have been very difficult, if not impossible, to fabricate by any other means than additive Solid Freeform Fabrication.
keywords	Architecture, Design, Solid Freefrom Fabrication, Senses
series	eCAADe
email
last changed	2022/06/07 07:58

_id	caadria2003_c4-2
id	caadria2003_c4-2
authors	Wittkopf, Stephen K. and E-Jin, Foo
year	2003
title	Challenges of Using Image-Based Modeling Tool within the Architectural Design Process
doi	https://doi.org/10.52842/conf.caadria.2003.597
source	CAADRIA 2003 [Proceedings of the 8th International Conference on Computer Aided Architectural Design Research in Asia / ISBN 974-9584-13-9] Bangkok Thailand 18-20 October 2003, pp. 597-612
summary	Architects and planners will increasingly have to deal with developments in urban sites where existing context is a critical part of their design considerations. It is therefore important that architects can envision the potential of emerging technologies as means to assist architectural design in the changing face of our build environment. The objective of this paper is to examine the opportunities which image-based modeling (IM) can offer to the architectural design in a context -rich urban built-environment by providing better means of representation of the design context. By drawing relations from the available precedents and the research findings, the paper provides insights into how IM application can create stronger visual awareness of the context, in order to assist design within such condition. This paper shows that the reliability of the IM models in terms of geometric accuracy and rendering quality decreases as the physical scale of the subject increases. The best result is generated from modeling small objects in studio environment as compare to creating larger architectural objects in exterior conditions.
series	CAADRIA
email
last changed	2022/06/07 07:57

_id	cf2003_m_006
id	cf2003_m_006
authors	ACHTEN, Henri and JESSURUN, Joran
year	2003
title	Learning From Mah Jong - Towards a Multi-Agent System that can Recognize Graphic Units
source	Digital Design - Research and Practice [Proceedings of the 10th International Conference on Computer Aided Architectural Design Futures / ISBN 1-4020-1210-1] Tainan (Taiwan) 13–15 October 2003, pp. 115-124
summary	Sketching is a major means of exploiting the first conceptual developments in architectural design. If we want to support the architect in the ideas-developing phase of design, then we need to understand the conventions of depiction and encoding in drawings. The theory of graphic units provides an extended list of such conventions that are widely used. We propose that a multi-agent system for recognition of graphic units in drawings is fruitful: agents can specialize in graphic units, a multi-agent system can deal with ambiguity through negotiation and conflict resolution, and multi-agent systems function in dynamically changing environments. We first make a multi-agent system that can do something simpler: playing Mah Jong solitary. The Mah Jong solitary system shares the following important features with a multi-agent system that can recognize graphic units: (1) specialized agents for moves; (2) negotiation between agents to establish the best move; (3) dynamically changing environment; and (4) search activity in more advanced strategies. The paper presents the theoretical basis of graphic units and multi-agents systems. The multi-agent framework and its implementation is presented. Various levels of game play are distinguished, and these are correlated to the multi-agent system. The paper shows how the findings form the basis for graphic unit recognition.
keywords	artificial intelligence, games, graphic units, agents
series	CAAD Futures
email
last changed	2003/11/22 16:39

_id	avocaad_2003_05
id	avocaad_2003_05
authors	Alexander Koutamanis
year	2003
title	Autonomous mechanisms in architectural design systems
source	LOCAL VALUES in a NETWORKED DESIGN WORLD - ADDED VALUE OF COMPUTER AIDED ARCHITECTURAL DESIGN, Stellingwerff, Martijn and Verbeke, Johan (Eds.), (2004) DUP Science - Delft University Press, ISBN 90-407-2507-1.
summary	The development of architectural design systems that describe fully the form, structure and behaviour of a design relies heavily on the incorporation of intelligence in the representations, analyses, transformations and transactions used by the computer. Traditionally such intelligence takes either of two forms. The first is a methodical framework that guides actions supported by the design system (usually in a top-down fashion). The second is local, intelligence mechanisms that resolve discrete, relatively well-defined subproblems (often with limited if any user intervention). Local intelligent mechanisms offer the means for adaptability and transformability in architectural design systems, including the localization of global tendencies. This refers both to the digital design technologies and to the historical, cultural and contextual modifications of design styles and approaches.
keywords	Architecture, Local values, Globalisation, Computer Aided Architectural Design
series	AVOCAAD
email
last changed	2006/01/16 21:38

_id	avocaad_2003_06
id	avocaad_2003_06
authors	Arturo F. Montagu and Juan Pablo Cieri
year	2003
title	Urbamedia - Development of an urban database of fragments of some Argentinian and Latin-American cities using digital technology
source	LOCAL VALUES in a NETWORKED DESIGN WORLD - ADDED VALUE OF COMPUTER AIDED ARCHITECTURAL DESIGN, Stellingwerff, Martijn and Verbeke, Johan (Eds.), (2004) DUP Science - Delft University Press, ISBN 90-407-2507-1.
summary	The proposal of "Urbamedia" is to undertake the development of 3D virtual and interactive models of historical areas of Latin-American cities. The selected zone is the "Mayo Avenue" including the "Mayo Square", an historical place of the city of Buenos Aires, Argentina; this project is financed by the National Agency of Scientific and Technological Development of Argentina and the University of Buenos Aires.We are presenting the first experimental model of the "Mayo Square" that has been developed at ABACUS, Department of Architecture & Building Aids Computer Unit, University of Strathclyde UK. combined with a system analysis of urban activities using the “Atlas.ti” CAQDAS software.This particular use of the “Atlas.ti” software is under experimental applications to this type of urban analysis procedures; allowed us the possibility to analysed a set of activities by means of graph theory as result of a series of interviews to the people working in the area. We are also looking to include historical areas of three cities: Mar del Plata, Rosario and Santa Fe (Argentina) and eventually other cities from Latin América as Rio de Janeiro and Habana.Due that ABACUS has a strong experience in city modelling plus the powerful software and hardware used there, we must develop a VRML customized menu to be adapted to our low cost PC equipment. The 3D model will be used mainly in urban design simulation procedures and the idea is to extend to other type of simulations of the environmental parameters.
keywords	Architecture, Local values, Globalisation, Computer Aided Architectural Design
series	AVOCAAD
email
last changed	2006/01/16 21:38

_id	caadria2003_c4-3
id	caadria2003_c4-3
authors	Belblidia, S. and Alby, E.
year	2003
title	Implicit Handling of Geometric Relations in an Existing Modeler
doi	https://doi.org/10.52842/conf.caadria.2003.613
source	CAADRIA 2003 [Proceedings of the 8th International Conference on Computer Aided Architectural Design Research in Asia / ISBN 974-9584-13-9] Bangkok Thailand 18-20 October 2003, pp. 613-622
summary	This paper presents a constraint-based modeling system, integrated into a widely used CAD modeler. Using a notification mechanism, the system records the precision functions called by the user in order to maintain geometric relations between points locations and source objects. These relations are stored in a directed graph which allows an automatic update of the model.
series	CAADRIA
email
last changed	2022/06/07 07:54

_id	ijac20031107
id	ijac20031107
authors	Berridge, Philip; Koch, Volker; Brown, Andre G.P.
year	2003
title	Information Spaces for Mobile City Access
source	International Journal of Architectural Computing vol. 1 - no. 1
summary	This paper describes two complementary European research projects that share common interests and goals.The work described is intended to facilitate city analysis and support decision-making. The first project focuses on the distribution, access and ease of use of city data. The system allows access to historical data concerning key buildings in Liverpool, England, via a suite of web-based tools and a palmtop device. The second project looks at extending the functionality of traditional computer aided design (CAD) software to enable geometric and semantic data to be combined within a single environment. The system allows those involved in city planning to better understand the past and present development pattern of an area so that their decisions on future proposals are better informed.The paper concludes by describing a system that integrates particular aspects of the two projects, and the potential that this integration can bring.This new work provides mobile access to historical city development data, current city information and tools to support urban project development.
series	journal
more	http://www.multi-science.co.uk/ijac.htm
last changed	2007/03/04 07:08

_id	caadria2003_a1-2
id	caadria2003_a1-2
authors	Bunyavipakul, Monchai and Charoensilp, Ekasidh
year	2003
title	Designing the Virtual Design Studio System for Collaborative Work on Pda Collaborative Works Anytime, Anywhere
doi	https://doi.org/10.52842/conf.caadria.2003.043
source	CAADRIA 2003 [Proceedings of the 8th International Conference on Computer Aided Architectural Design Research in Asia / ISBN 974-9584-13-9] Bangkok Thailand 18-20 October 2003, pp. 43-54
summary	This research presents the collaboration in the VDS system through a microcomputer technology- a PDA (Personal Digital Assistants). Architect can collaborate anytime anyplace via VDS, a substitution to an old system that requires a specific location to work on. This research has studied and analyzed the format and the limitation of collaboration between PDA and Personal Computer, the wireless communication technology, and the Web Service technology, which enable different devices to share information through the Internet Network. The work process and the studied information have been used to develop a Web Application, a collaboration tool for a team of architect and designer. This Web Application has been tested in a renovation project, a clubhouse for a scuba diving place The objective of this research is to become a guideline of collaboration in architectural design work through Smart Object in order to serve the coming Ubiquitous era (Weiser, 1998)
series	CAADRIA
email
last changed	2022/06/07 07:54

_id	caadria2003_a1-1
id	caadria2003_a1-1
authors	Burrow, A., Burry, J., More, G., Tengono, Y. and Burry, M.
year	2003
title	Visual and Sonic Communication Representations to Support Design Interaction
doi	https://doi.org/10.52842/conf.caadria.2003.029
source	CAADRIA 2003 [Proceedings of the 8th International Conference on Computer Aided Architectural Design Research in Asia / ISBN 974-9584-13-9] Bangkok Thailand 18-20 October 2003, pp. 29-42
summary	Interaction between collaborating parties exerts strong and surprising forces on the design process and thus its outcomes. Hence, there is much to be gained by investigating the nature of these communications. By definition, an organisation establishes clear protocols to realise effective communication, and does so in response to business needs. In contrast, creative endeavours must often harness loose teams of specialised individuals, working in different contexts, disciplines, and language bases, and relying on nonformalised yet highly selective exchanges of information. It is therefore a considerable challenge to comprehend and improve these processes. One approach is to exploit the discrete information contained within digital communications to produce models of these complex conditions. This paper reports preliminary work to identify the components of an email visualisation system. The goal is to apprehend developing structures, providing the collective with the capacity for reflection.
series	CAADRIA
email
last changed	2022/06/07 07:54

_id	caadria2003_b5-2
id	caadria2003_b5-2
authors	Caldas, Luisa G.
year	2003
title	Shape Generation Using Pareto Genetic Algorithms Integrating Conflicting Design Objectives in Low-Energy Architecture
doi	https://doi.org/10.52842/conf.caadria.2003.681
source	CAADRIA 2003 [Proceedings of the 8th International Conference on Computer Aided Architectural Design Research in Asia / ISBN 974-9584-13-9] Bangkok Thailand 18-20 October 2003, pp. 681-694
summary	The Generative Design System [GDS] presented in this paper was developed to assist designers in researching low-energy architecture solutions. The GDS has the capability to evolve architectural forms that are energy-efficient, while complying to design intentions expressed by the architect, and responding to conflicting objectives. To achieve this evolutionary development, the system integrates a search and optimization method [Genetic Algorithm], a building energy simulation software [DOE2.1E], and Pareto multicriteria optimization techniques. The GDS adaptively generates populations of alternative solutions, from an initial schematic layout and a set of rules and constraints designed by the architect to encode design intentions. The two conflicting objective functions considered in this paper are maximizing daylighting use, and minimizing energy consumption for conditioning the building. The GDS generated an uniformly sampled, continuous Pareto front, from which six points were visualized in terms of the proposed architectural solutions.
series	CAADRIA
email
last changed	2022/06/07 07:54

_id	ijac20031402
id	ijac20031402
authors	Caldas, Luisa G.; Norford, Leslie K.
year	2003
title	Shape Generation Using Pareto Genetic Algorithms: Integrating Conflicting Design Objectives in Low-Energy Architecture
source	International Journal of Architectural Computing vol. 1 - no. 4
summary	The Generative Design System [GDS] presented in this paper was developed to assist designers in researching low-energy architecture solutions. The GDS has the capability to evolve architectural forms that are energy-efficient, while complying to design intentions expressed by the architect and responding to conflicting objectives. To achieve this evolutionary development, the system integrates a search and optimization method [Genetic Algorithm], building energy simulation software [DOE2.1E], and Pareto multicriteria optimization techniques. The GDS adaptively generates populations of alternative solutions, from an initial schematic layout and a set of rules and constraints designed by the architect to encode design intentions. The two conflicting objective functions considered in this paper are maximizing daylighting use and minimizing energy consumption for conditioning the building. The GDS generated an uniformly sampled, continuous Pareto front, from which six points were visualized in terms of the proposed architectural solutions.
series	journal
more	http://www.multi-science.co.uk/ijac.htm
last changed	2007/03/04 07:08

For more results click below: