Cumincad : CUMINCAD Papers : Search Results

CumInCAD is a Cumulative Index about publications in Computer Aided Architectural Design
supported by the sibling associations ACADIA, CAADRIA, eCAADe, SIGraDi, ASCAAD and CAAD futures

PDF papers
References

Hits 1 to 20 of 603

Reformat results as: short short into frame detailed detailed into frame

_id	cf2003_m_016
id	cf2003_m_016
authors	CHEN, Hong-Sheng and LIN, Feng-Tyan
year	2003
title	A Simulation Study on Public Building's Staircase Fault Tolerance
source	Digital Design - Research and Practice [Proceedings of the 10th International Conference on Computer Aided Architectural Design Futures / ISBN 1-4020-1210-1] Tainan (Taiwan) 13–15 October 2003, pp. 393-402
summary	This paper applies the concept of fault tolerance to staircase layout plan. Fire or smoke may cause some staircases in a building inaccessible. We argue that architects should assess the result from the possible fault of vertical routes. The capability of tolerating staircase faults depends on space usage, arrangement, and pedestrian attributes. In this study, a mathematical model is constructed. For analysing pedestrian's movement in interior space, we employ Monte Carol simulation and Agent-Based Modelling method in a CAAD environment. It helps us to visualise the dynamic process of agent's evacuation process, and to test the problem of possible staircase faults. Finally, a case study brings some important discoveries.
keywords	agents, fault tolerance, simulation
series	CAAD Futures
last changed	2003/09/22 12:21

_id	ecaade03_659_166_hungming
id	ecaade03_659_166_hungming
authors	Cheng, Hung-Ming
year	2003
title	A digital modeling with reasoning system in early phase of design
doi	https://doi.org/10.52842/conf.ecaade.2003.659
source	Digital Design [21th eCAADe Conference Proceedings / ISBN 0-9541183-1-6] Graz (Austria) 17-20 September 2003, pp. 659-664
summary	This study describes statue in the early phase of design, the approach taken by its conceptual development and manipulation. And on the developing digital tools provide a computational support for the process of indexing and retrieving. The digital modeling also addresses specifically architectural programming, adjacent relationship between the building element and articulation in designing. The overall in building mass development starting with reasoning of the conceptual model in early phase try to find evocative cases to help designer thinking. And finally discuss some issues and challenges of artificial intelligent. The research for representing designer’s creativity and searching solution provide another way to generate an articulating conceptual model. The integration approach of research starts with the pure case-based and rule-based reasoning system to help designer generate more understandable and creative product in the architectural design application.
keywords	Case-based reasoning, conceptual model, computer aided design, buildingmass development, design process
series	eCAADe
email
last changed	2022/06/07 07:55

_id	ecaade03_665_181_duarte
id	ecaade03_665_181_duarte
authors	Duarte, José P.
year	2003
title	A Discursive Grammar for Customizing Mass Housing - The case of Siza´s houses at Malagueira
doi	https://doi.org/10.52842/conf.ecaade.2003.665
source	Digital Design [21th eCAADe Conference Proceedings / ISBN 0-9541183-1-6] Graz (Austria) 17-20 September 2003, pp. 665-674
summary	The ultimate goal of the described research is a process for mass customizing housing based on computer-aided design and production systems. The current goal is the development of an interactive system for generating solutions on the Web based on a modeling approach called discursive grammar. A discursive grammar consists of a programming grammar and a designing grammar. The programming grammar generates design briefs based on user data; the designing grammar provides the rules for generating designs in a particular style, and a set of heuristics guides the generation of designs towards a solution that matches the design brief. This paper describes the designing grammar using Siza´s houses at Malagueira as a case study.
keywords	Mass customization: housing; grammars; Siza; design automation
series	eCAADe
email
more	http://www.civil.ist.utl.pt/~jduarte/malag/
last changed	2022/06/07 07:55

_id	43f0
id	43f0
authors	Flynn, D., van Schaik, P., Blackman, T., Fencott, P.C., Hobbs, B., & Calderon, C.
year	2003
title	DEVELOPING A VIRTUAL REALITY-BASED METHODOLOGY FOR PEOPLE WITH DEMENTIA: A FEASIBILITY STUDY.
source	Journal of CyberPsychology and Behavior, Vol6, Number6, 2003.
summary	The aim of this study was to examine the feasibility of virtual reality (VR) technology for use by persons with dementia (PWD). Data were obtained directly from six PWD regarding their experiences with a virtual environment (VE) of a large outdoor park. A user-centered method was developed to assess: (a) presence; (b) user inputs; (c) display quality; (d) simulation fidelity; and (e) overall system usability. The extent to which PWD could perform four functional activities in the VE was also investigated (e.g., mailing a letter). In addition, physical and psychological well-being of PWD while interacting with the VE was assessed objectively by recording heart rate during the VR sessions and subjectively with discrete questionnaire items and real-time prompts. Symptom profiles associated with simulator sickness were assessed with an adapted version of the Simulator Sickness Questionnaire. The study found that PWD to some extent experienced presence; perceived that objects were realistic and moved naturally; generally felt in control of the interaction; and demonstrated little difficulty using a joystick for navigation. The study also demonstrated that VR is an appropriate medium for assessing functional behavior within the context of an ecologically valid VE. PWD did not experience any significant increase in symptoms associated with simulator sickness, or detriments to their psychological and physical well-being. These findings demonstrated that it is feasible to work in VEs with PWD.
keywords	Dementia, VR
series	journal paper
type	normal paper
email
last changed	2005/12/02 11:36

_id	ijac20031308
id	ijac20031308
authors	Garcia Alvarado, Rodrigo; Baesler Abufarde, Felipe; Moreno, Pedro Rodriguez; Bravo, Mauricio Pezo
year	2003
title	Modeling of Activities: an approach to the virtual representation of human behaviors in architectural spaces tested in emergency units
source	International Journal of Architectural Computing vol. 1 - no. 3
summary	Despite the increasing interest in the functionality and humanization of architecture, there are few studies covering the occupation of buildings and methods to represent activities in spaces. This article explores new software for simulating and virtual modeling in order to facilitate the analysis and visualization of events in buildings. Of particular importance is programming the behavior of 3D-characters according to the probabilistic evolution of activities, and producing animations and interactive models. This approach was tested in a study of three emergency units of hospitals in Chile. Although a full integration of software was not possible, the process developed (in particular the subjective tours) demonstrated that the technique can provide new information about the functioning and spatiality of the units. In addition, it suggested operative and architectural improvements supporting the management and design of facilities.
series	journal
more	http://www.multi-science.co.uk/ijac.htm
last changed	2007/03/04 07:08

_id	ecaade2010_233
id	ecaade2010_233
authors	Guerbuez, Esra; Cagdas, Guelen; Alacam, Sema
year	2010
title	A Generative Design Model for Gaziantep’s Traditional Pattern
doi	https://doi.org/10.52842/conf.ecaade.2010.841
source	FUTURE CITIES [28th eCAADe Conference Proceedings / ISBN 978-0-9541183-9-6] ETH Zurich (Switzerland) 15-18 September 2010, pp.841-849
wos	WOS:000340629400090
summary	This paper describes a research to develop new urban designalternatives for Gaziantep by using fractal based approaches. The aim of the research is not only generating new form alternatives but also considering the continuity of traditional architectural and urban pattern which faces deterioration. Within this study, it is intended to test the applicability of the fractal based generative approaches and explore the potential advantages. The method called CADaFED (Ediz, 2003) is updated to be used in one of the 3d modeling programs, 3DsMax scripting and it is used as an experimental tool in two-day student workshop. The working field is limited as Bey Neighbourhood in Gaziantep for its well-preserved architectural characteristics. In this paper, the outcomes of the student workshop will be evaluated and discussed in the sense of affirmative effects of fractal based design approaches.
keywords	Generative design; Fractal based design; Computational architectural design; Traditional pattern
series	eCAADe
email
last changed	2022/06/07 07:51

_id	ijac20031109
id	ijac20031109
authors	Liu, Yu-Tung; Shen-Kai, Tang
year	2003
title	Space, Place and Digital Media:Towards a Better Simulation of a City that has now Disappeared
source	International Journal of Architectural Computing vol. 1 - no. 1
summary	Digital media enable researchers and designers to derive better informed processes in solving problems of historical architectural restoration and virtual archaeology. However, recently insufficiencies have been found in the main technologies often applied in such techniques, such as 3D modeling, high-quality rendering and animation. Given these problems, this paper attempts to explore a digital reconstruction procedure for historical architecture and cities using 3D scanning, Virtual Reality cave technology and motion capture technology. This case study is based on a collaborative project in conjunction with the National Palace Museum, Taiwan, and the China Times, Taiwan.The five steps involved in this project include data collection and analysis, three-dimensional digital inferences, digital reconstruction of static and moving models, scenario dynamics (by integrating the two kinds of models), and visual-spatial immersion using a VR-cave representation. Finally, a preliminary digital reconstruction procedure is presented.
series	journal
email
more	http://www.multi-science.co.uk/ijac.htm
last changed	2007/03/04 07:08

_id	ijac20031208
id	ijac20031208
authors	Ozel, Filiz; Pahle, Robert; Juyal, Manu
year	2003
title	An XML Framework for Simulation and Analysis of Buildings
source	International Journal of Architectural Computing vol. 1 - no. 2
summary	This study focuses on the problem of how to structure spatial and component based building data with the intention to use it in the simulation and analysis of the performance of buildings. Special attention was paid to the interoperability and optimization of the resulting data files.The study builds its investigation onto XML (Extensible Markup Language) data modeling framework.The authors have studied different ways of arranging building information in XML format for effective data storage and have developed a data modeling framework called bmXML for buildings. Initial results are two-fold: a VBA application was developed to create the appropriate building model in AutoCAD with the intention to write building data in bmXML format, and a JAVA application to view the file thus created.This paper primarily focuses on the former, i.e. the AutoCAD application and the bmXML format.
series	journal
more	http://www.multi-science.co.uk/ijac.htm
last changed	2007/03/04 07:08

_id	ecaade03_533_103_pahle
id	ecaade03_533_103_pahle
authors	Pahle, R., Juyal, M. and Ozel, F.
year	2003
title	DATA MODELING OF BUILDINGS WITH BMXML
doi	https://doi.org/10.52842/conf.ecaade.2003.533
source	Digital Design [21th eCAADe Conference Proceedings / ISBN 0-9541183-1-6] Graz (Austria) 17-20 September 2003, pp. 533-540
summary	XML (extensible markup language) is emerging as a significant tool not only to model data but also to facilitate the seamless sharing of data between multiple domains. Therefore it can be quite powerful in modeling building data that must often be shared between large numbers of professionals. The focus of this study is how to use this paradigm in structuring spatial and component based building data with the intention to use it in the analysis and simulation of the performance of buildings. The framework developed by the authors consists of three components. An XML structure (bmXML) for storing building data, a VBA-AutoCAD-Application for generating the XML files (bmGenerator) and a JAVA-Application which reads the bmXML data and prepares the information for simulation purposes. This paper primarily focuses on theVBA-AutoCADApplication.
keywords	Data modeling; XML; simulation
series	eCAADe
email
last changed	2022/06/07 08:00

_id	caadria2003_c3-2
id	caadria2003_c3-2
authors	Parisel, C., Revez, J., Tidafi, T. and De Paoli, G.
year	2003
title	Computer Modeling as a Means of Reflexion In Archaeology. A New Epigraphic and Architectural Approach Applied to a Monument Registered on the World Heritage List.
doi	https://doi.org/10.52842/conf.caadria.2003.457
source	CAADRIA 2003 [Proceedings of the 8th International Conference on Computer Aided Architectural Design Research in Asia / ISBN 974-9584-13-9] Bangkok Thailand 18-20 October 2003, pp. 457-474
summary	Purpose of this paper is to present the first promising results of an ongoing research program that is part of a larger multi-year project carried out by the Computer Aided Design Research Group (GRCAO) of the UniversitÈ de MontrÈal, in order to define new methods of archaeological restitution using computer-aided means. This novel approach involves a redefinition of surveying techniques, data processing and knowledge-based thinking in disciplines such as epigraphy and architecture. As its chosen field of investigation, the GRCAO is using the Egyptian temple of Karnak, a monument on the UNESCO World Heritage list that is of considerable historical importance. This impressive archaeological site serves as an excellent case study and testing ground for the project, since it underwent tremendous and complex architectural transformations in the course of its two thousand year-long history.
series	CAADRIA
email
last changed	2022/06/07 08:00

_id	ecaade03_125_207_tsou
id	ecaade03_125_207_tsou
authors	Tsou, J.-Y., Lam, S. and Xue, Y.
year	2003
title	Scientific Modeling for Bridging the Environmental Design and Social Behavior in Hyper Dense Urban Open Space Planning
doi	https://doi.org/10.52842/conf.ecaade.2003.125
source	Digital Design [21th eCAADe Conference Proceedings / ISBN 0-9541183-1-6] Graz (Austria) 17-20 September 2003, pp. 125-129
summary	In Hong Kong, about 46% of the population lives in public housing estates. The density of the estates could be as high as 2,500 persons per hectare and there is an increased pressure for increasing the density. Therefore, open space in the estates contributes significantly for relieving the sense of over-congestion. Preliminary study shows that the usage of these open spaces is as low as 1.36%, and the low usage rate is largely due to inappropriate planning and design, particularly with respect to climate requirements, rather than insufficient area. Researchers thus attempt to overlay the user-behavior with the environment-behavior data to investigate the impact of irresponsive environmental design on the user-behavior. It is also this exercise that provides new thoughts to research of social behavior and activity study for high density urban habitation.
keywords	Building simulation: post-occupancy evaluation; behavior maps; planningand design for hyper dense habitation environment
series	eCAADe
email
last changed	2022/06/07 07:57

_id	6943
id	6943
authors	ML Maher, G Smith and JS Gero
year	2003
title	DESIGN AGENTS IN 3D VIRTUALWORLDS
source	IJCAI03 Workshop on Cognitive Modeling of Agents and Multi-Agent Interaction, R Sun (ed), IJCAI, Acapulco, pp 92-100.
summary	Design agents are rational agents that monitor and modify elements of a designed environment. Special characteristics of design agents include the ability to reason about patterns and concepts, and the ability to act autonomously in modifying or changing the design to achieve their own goals. 3D Virtual Worlds are multi-user distributed systems that provide a designed environment and a closed world environment for studying design agents in a multiagent system. We present a model for a design agent reasoning process and a model for constructing a memory of the agent’s knowledge and interaction with a virtual world. The reasoning process includes sensation, perception, conception, hypothesizing, and planning a sequence of actions. Each agent has a constructed memory: a dynamic and changing view of the designed world that is determined by the agents sense data and reasoning. The agents construct and maintain a representation of the relevant objects in the world using a Function- Behavior-Structure formalism in order to reason about the intended and actual functions of the designed objects in the world. We have implemented this agent model by extending the Active Worlds platform so that each object in the 3D world can have agency. We illustrate the model with a door agent and a multi-agent room that reason about the use of the 3D world.
keywords	design agents, virtual worlds, FBS framework
type	normal paper
email
last changed	2004/04/10 02:47

_id	caadria2003_a1-3
id	caadria2003_a1-3
authors	Shih, Sheng-Cheng
year	2003
title	A Web-Based Agent Framework for Collaborative Design-Build Communication
doi	https://doi.org/10.52842/conf.caadria.2003.055
source	CAADRIA 2003 [Proceedings of the 8th International Conference on Computer Aided Architectural Design Research in Asia / ISBN 974-9584-13-9] Bangkok Thailand 18-20 October 2003, pp. 55-68
summary	The Internet connects the globe as a whole and at the same time pushes the competition increasing dramatically. Multidiscipline and distributed collaborative design-build in architecture, engineering and construction (A/E/C) companies can gain foster competitive advantage, improved designs, and more effective management of construction facilities. However collaboration can often fail, since it involves different professions who often hold different goals and also one-off organizations also build obstacles to collaboration. This paper presents a web-based agent framework to support communication, to facilitate shared understanding amongst the participants and to inspire teamwork. This paper proposes a multi-agent social interaction framework as the communication model of design-build projects. The conceptual framework emp hasizes process-centric learning and the creation of group agreements within design-build collaborative activities, which help facilitate conflict migration. In addition, based upon web agent technology, this communication framework providing an intelligence distribution opportunity for the for the A/C/E industry to introduce a new and innovative paradigm of collaborative design.
series	CAADRIA
email
last changed	2022/06/07 07:56

_id	caadria2003_c2-4
id	caadria2003_c2-4
authors	Al-Sallal, Khaled A.
year	2003
title	Integrating Energy Design Into Caad Tools: Theoretical Limits and Potentials
doi	https://doi.org/10.52842/conf.caadria.2003.323
source	CAADRIA 2003 [Proceedings of the 8th International Conference on Computer Aided Architectural Design Research in Asia / ISBN 974-9584-13-9] Bangkok Thailand 18-20 October 2003, pp. 323-340
summary	The study is part of a research aims to establish theoretical grounds essential for the development of user efficient design tools for energy-conscious architectural design, based on theories in human factors of intelligent interfaces, problem solving, and architectural design. It starts by reviewing the shortcomings of the current energy design tools, from both architectural design and human factor points of view. It discusses the issues of energy integration with design from three different points of view: architectural, problem-solving, and human factors. It evaluates theoretically the potentials and limitations of the current approaches and technologies in artificial intelligence toward achieving the notion "integrating energy design knowledge into the design process" in practice and education based on research in the area of problem solving and human factors and usability concerns. The study considers the user interface model that is based on the cognitive approach and can be implemented by the hierarchical structure and the object-oriented model, as a promising direction for future development. That is because this model regards the user as the center of the design tool. However, there are still limitations that require extensive research in both theoretical and implementation directions. At the end, the study concludes by discussing the important points for future research.
series	CAADRIA
email
last changed	2022/06/07 07:54

_id	sigradi2003_121
id	sigradi2003_121
authors	Alvarado, Rodrigo García, Castillo, Gino Alvarez
year	2003
title	Técnicas Cinematográficas para las Animaciones Arquitectónicas (Film-making techniques for Architectural Animations)
source	SIGraDi 2003 - [Proceedings of the 7th Iberoamerican Congress of Digital Graphics] Rosario Argentina 5-7 november 2003
summary	The paper presents film techniques for the expressive development of architectural animations, based on a graphic analysis of productions related to architecture (famous movies, documentaries of buildings and contemporary animations). This study is revealing some cinematographic concepts such as the dynamic composition of image, diversity of camera's positions, control of movements and rhythmic montage of shots that support a meaningful presentation of buildings. Also it suggests the geometric programming of movements and influences in the architectural design.
keywords	Animation, Cinematography, Movement
series	SIGRADI
email
last changed	2016/03/10 09:47

_id	sigradi2003_005
id	sigradi2003_005
authors	Barros, D.R., Mandagarán, M., Susta, C. and Nigro, P.
year	2003
title	Hipermedios y no linealidad (Hypermedia and non-linearity)
source	SIGraDi 2003 - [Proceedings of the 7th Iberoamerican Congress of Digital Graphics] Rosario Argentina 5-7 november 2003
summary	The following is the preliminary presentation of a study being carried out at the CEAC FAUD UNMdP Center, registered within the research project 15/B101, on hypermedia readings of urban fragments by non-expert users. This work aims at contributing to the definition of an analysis methodology applicable to hypermedia, Web site and CD rom, about design and architecture topics. It is based on the model of analysis by Aarseth, enlarged for hypermedia. Its purpose is to recognize and describe the features, recurrencies, saturations and differences which characterize them.
keywords	Hypermedia, design, analysis methodology
series	SIGRADI
email
last changed	2016/03/10 09:47

_id	c35c
authors	Bender, Oliver
year	2003
title	The Geographical Alpine Information System “Galpis” in the Raumalp Project. Outlay and Output
source	CORP 2003, Vienna University of Technology, 25.2.-28.2.2003 [Proceedings on CD-Rom]
summary	RAUMALP, an interdisciplinary research project of the Austrian Academy of Sciences, shall examine problem areas of spatial development on community level in the Austrian alpine region. The aim is the investigation of scientific basics for political decision finding, especially for the regional-specific realisation of the Alpine Convention. All ascertained information shall be included in “GALPIS”, a comprehensive Alpine Space Information System. GALPIS based on ESRI ArcGIS and MS Access software works with data from different sources, like ISIS, the electronic data base of Statistic Austria, and original data and maps gathered and elaborated by the working groups of RAUMALP. This also includes ecological raster data. Dealing with administrative units, „real“ space and raster space, RAUMALP will integrate the different space levels mostly to administrative spatial units representing the existing 1145 communities of the RAUMALP study area. This will be realised by overlay of grids, types of land use and communitypolygons. Major task of GALPIS is a conversion of former communal data (p. e. 1451 communities in 1951) that should represent the recent administrative boundaries. By this way it is possible to make thematic and time-integrative analyses of community data. GIS modelling of the six case studies is more complex. The conceptual model has to integrate several vector and raster layers such as land plots (“Digitale Katastralmappe”), types of land use (“Land Use and Land Cover Austria” by M. Seger) and biodiversity. P. e., the working group settlement is using a logical data model based on the entity “building” with the attributes “construction”,“function”, etc.
series	other
email
last changed	2003/11/21 15:16

_id	792a
authors	Blaschke, Thomas and Tiede, Dirk
year	2003
title	Bridging GIS-based landscape analysis/modelling and 3D-simulation.Is this already 4D?
source	CORP 2003, Vienna University of Technology, 25.2.-28.2.2003 [Proceedings on CD-Rom]
summary	Several studies have used remote sensing to map patterns of e.g. deforestation or to analyse the rates of land use change. Thesestudies have proven useful for interpreting the causes of urbanization, deforestation etc. and the impact of such changes on theregion. Monitoring of change (e.g. deforestation or reforestation) is frequently perceived as one of the most important contributionsof remote sensing technology to the study of global ecological and environmental change (Roughgarden et al. 1991). Manyresearchers believe that the integration of remote sensing techniques within analysis of environmental change is essential if ecologistsare to meet the challenges of the future, specifically issues relating to global change; however, in practice, this integration has so farbeen limited (Griffiths & Mather 2000). Considerable difficulties are encountered in linking, on the one hand, the biologies oforganisms and the ecologies of populations to the fluxes of material and energy quantifiable at the level of ecosystems. In this paper,we concentrate on the methodological aspects of the delineation of landscape objects and touch the ecological application onlysuperficially but we elucidate the potential of the proposed methodology for several ecological applications briefly.
series	other
email
last changed	2003/11/21 15:16

_id	ecaade03_595_49_delic
id	ecaade03_595_49_delic
authors	Delic, Davor and Turk, Ziga
year	2003
title	HYCE – Hyperlearning in Civil Engineering Curricula A Pilot Course in Implementation of Information Technology Course - a Case Study at the Faculty of Civil Engineering, University of Zagreb
doi	https://doi.org/10.52842/conf.ecaade.2003.595
source	Digital Design [21th eCAADe Conference Proceedings / ISBN 0-9541183-1-6] Graz (Austria) 17-20 September 2003, pp. 595-600
summary	Outline of development of a revised base ITC course at the Faculty is shown here. The course, called Introduction To Information Technology Implementation is aimed for 2nd year students (3rd semester) of the study. For the first time it was held in the winter semester of 2002/03 as a pilot course replacing the old way of course delivery. This implementation was carried out through a “pathfinder” project WORMES from February 2002 till March 2003 and would be used as a template for future Hyperlearning implementation on other courses through other Faculty education programes. The objective was to establish continuous students teamwork around a problem – a project completely accomplished in IT surround. A slightly adapted methodology known as Hyperlearning – a version of Problem Based Learning, was chosen as a based learning methodology for a new way of course delivery. The gained results were really impressive. Not only efficiency of delivery was increased in many ways (less hours spent on exercises, better knowledge detaining...) but also huge enthusiasm among students was constantly maintained and their creativity was emphasized surprisingly. A lot of data were collected, analyzed and some of the results are published here.
keywords	Hyperlearning, Problem based learning, IT course development
series	eCAADe
email
more	http://www.grad.hr
last changed	2022/06/07 07:55

_id	ecaade03_567_96_newton
id	ecaade03_567_96_newton
authors	D’souza, Newton and Talbott, Newton
year	2003
title	The (Non) Relation between Efficiency and Choice of Computer tools in Design Modeling: An Automated Protocol Analysis
doi	https://doi.org/10.52842/conf.ecaade.2003.567
source	Digital Design [21th eCAADe Conference Proceedings / ISBN 0-9541183-1-6] Graz (Austria) 17-20 September 2003, pp. 567-574
summary	There exists a fundamental belief among mainstream CAAD software developers that a designer’s thought process is mainly driven towards achieving optimum efficiency. This paper argues that designers are not as much concerned with efficiency as much as protecting their personal preference for a certain method of object construction. Identifying and providing support to these methods - referred to here as ‘methods-ofmaking,’ is hence considered vital to how design efficiency is defined and how future CAAD tools are created. This hypothesis is empirically supported through a study conducted among 30 design students at the School of Architecture and Urban Planning, University of Wisconsin–Milwaukee.
keywords	Computer tools, efficiency, design modeling, methods-of-making, preference
series	eCAADe
email
more	http://www.uwm.edu/~nsdsouza
last changed	2022/06/07 07:55

For more results click below: