Cumincad : CUMINCAD Papers : Search Results

CumInCAD is a Cumulative Index about publications in Computer Aided Architectural Design
supported by the sibling associations ACADIA, CAADRIA, eCAADe, SIGraDi, ASCAAD and CAAD futures

PDF papers
References

Hits 1 to 20 of 605

Reformat results as: short short into frame detailed detailed into frame

_id	19ea
authors	Dallhammer, Erich
year	2003
title	The IKEA Factor - Driving elements of the development of shopping centresat the edges of European metropolitan regions
source	CORP 2003, Vienna University of Technology, 25.2.-28.2.2003 [Proceedings on CD-Rom]
summary	A house and a garden in the suburb, a car for each adult and a TV set with minidish. On weekdays mum and dad work, the children go to school or kindergarten. On Saturdays (or Sundays) the family goes shopping to the shopping centre, where they buy what they need, have a cheap meal and can see a film or just pass the time. That seems to be the way of life for a typical middle class family in the so-called western world, or at least what sitcoms, comics, adverts and films make people believe what it normally should be. That propagated way of living strongly influences people’s and especially consumers’ behavioural patterns and consequently spatialdevelopments, which are the present challenges for urban and regional planners.
series	other
email
last changed	2003/03/11 20:39

_id	ecaade2023_000
id	ecaade2023_000
authors	Dokonal, Wolfgang, Hirschberg, Urs and Wurzer, Gabriel
year	2023
title	eCAADe 2023 Digital Design Reconsidered - Volume 1
source	Dokonal, W, Hirschberg, U and Wurzer, G (eds.), Digital Design Reconsidered - Proceedings of the 41st Conference on Education and Research in Computer Aided Architectural Design in Europe (eCAADe 2023) - Volume 1, Graz, 20-22 September 2023, 905 p.
doi	https://doi.org/10.52842/conf.ecaade.2023.1.001
summary	The conference logo is a bird’s eye view of spiral stairs that join and separate – an homage to the famous double spiral staircase in Graz, a tourist attraction of this city and a must-see for any architecturally minded visitor. Carved out of limestone, the medieval construction of the original is a daring feat of masonry as well as a symbolic gesture. The design speaks of separation and reconciliation: The paths of two people that climb the double spiral stairs separate and then meet again at each platform. The relationship between architectural design and the growing digital repertoire of tools and possibilities seems to undergo similar cycles of attraction and rejection: enthusiasm about digital innovations – whether in Virtual Reality, Augmented Reality, Energy Design, Robotic Fabrication, the many Dimensions of BIM or, as right now, in AI and Machine Learning – is typically followed by a certain disillusionment and a realization that the promises were somewhat overblown. But a turn away from these digital innovations can only be temporary. In our call for papers we refer to the first and second ‘digital turns’, a term Mario Carpo coined. Yes, it’s a bit of a pun, but you could indeed see these digital turns in our logo as well. Carpo would probably agree that design and the digital have become inseparably intertwined. While they may be circling in different directions, an innovative rejoinder is always just around the corner. The theme of the conference asked participants to re-consider the relationship between Design and the Digital. The notion of a cycle is already present in the syllable “re”. Indeed, 20 years earlier, in 2003, we held an ECAADE conference in Graz simply under the title “Digital Design” and our re-using – or is it re-cycling? – the theme can be seen as the completion of one of those cycles described above: One level up, we meet again, we’ve come full circle. The question of the relationship between Design and the Digital is still in flux, still worthy of renewed consideration. There is a historical notion implicit in the theme. To reconsider something, one needs to take a step back, to look into the past as well as into the future. Indeed, at this conference we wanted to take a longer view, something not done often enough in the fast-paced world of digital technology. Carefully considering one’s past can be a source of inspiration. In fact, the double spiral stair that inspired our conference logo also inspired many architects through the ages. Konrad Wachsmann, for example, is said to have come up with his famous Grapevine assembly system based on this double spiral stair and its intricate joinery. More recently, Rem Koolhaas deemed the double spiral staircase in Graz important enough to include a detailed model of it in his “elements of architecture” exhibition at the Venice Biennale in 2014. Our interpretation of the stair is a typically digital one, you might say. First of all: it’s a rendering of a virtual model; it only exists inside a computer. Secondly, this virtual model isn’t true to the original. Instead, it does what the digital has made so easy to do: it exaggerates. Where the original has just two spiral stairs that separate and join, our model consists of countless stairs that are joined in this way. We see only a part of the model, but the stairs appear to continue in all directions. The implication is of an endless field of spiral stairs. As the 3D model was generated with a parametric script, it would be very easy to change all parameters of it – including the number of stairs that make it up. Everyone at this conference is familiar with the concept of parametric design: it makes generating models of seemingly endless amounts of connected spiral stairs really easy. Although, of course, if we’re too literal about the term ‘endless’, generating our stair model will eventually crash even the most advanced computers. We know that, too. – That's another truth about the Digital: it makes a promise of infinity, which, in the end, it can’t keep. And even if it could: what’s the point of just adding more of the same: more variations, more options, more possible ways to get lost? Doesn’t the original double spiral staircase contain all those derivatives already? Don’t we know that ‘more’ isn’t necessarily better? In the original double spiral stair the happy end is guaranteed: the lovers’ paths meet at the top as well as when they exit the building. Therefore, the stair is also colloquially known as the Busserlstiege (the kissing stair) or the Versöhnungsstiege (reconciliation stair). In our digitally enhanced version, this outcome is no longer clear: we can choose between multiple directions at each level and we risk losing sight of the one we were with. This is also emblematic of our field of research. eCAADe was founded to promote “good practice and sharing information in relation to the use of computers in research and education in architecture and related professions” (see ecaade.org). That may have seemed a straightforward proposition forty years ago, when the association was founded. A look at the breadth and depth of research topics presented and discussed at this conference (and as a consequence in this book, for which you’re reading the editorial) shows how the field has developed over these forty years. There are sessions on Digital Design Education, on Digital Fabrication, on Virtual Reality, on Virtual Heritage, on Generative Design and Machine Learning, on Digital Cities, on Simulation and Digital Twins, on BIM, on Sustainability, on Circular Design, on Design Theory and on Digital Design Experimentations. We hope you will find what you’re looking for in this book and at the conference – and maybe even more than that: surprising turns and happy encounters between Design and the Digital.
series	eCAADe
email
last changed	2023/12/10 10:49

_id	ecaade2023_001
id	ecaade2023_001
authors	Dokonal, Wolfgang, Hirschberg, Urs and Wurzer, Gabriel
year	2023
title	eCAADe 2023 Digital Design Reconsidered - Volume 2
source	Dokonal, W, Hirschberg, U and Wurzer, G (eds.), Digital Design Reconsidered - Proceedings of the 41st Conference on Education and Research in Computer Aided Architectural Design in Europe (eCAADe 2023) - Volume 2, Graz, 20-22 September 2023, 899 p.
doi	https://doi.org/10.52842/conf.ecaade.2023.2.001
summary	The conference logo is a bird’s eye view of spiral stairs that join and separate – an homage to the famous double spiral staircase in Graz, a tourist attraction of this city and a must-see for any architecturally minded visitor. Carved out of limestone, the medieval construction of the original is a daring feat of masonry as well as a symbolic gesture. The design speaks of separation and reconciliation: The paths of two people that climb the double spiral stairs separate and then meet again at each platform. The relationship between architectural design and the growing digital repertoire of tools and possibilities seems to undergo similar cycles of attraction and rejection: enthusiasm about digital innovations – whether in Virtual Reality, Augmented Reality, Energy Design, Robotic Fabrication, the many Dimensions of BIM or, as right now, in AI and Machine Learning – is typically followed by a certain disillusionment and a realization that the promises were somewhat overblown. But a turn away from these digital innovations can only be temporary. In our call for papers we refer to the first and second ‘digital turns’, a term Mario Carpo coined. Yes, it’s a bit of a pun, but you could indeed see these digital turns in our logo as well. Carpo would probably agree that design and the digital have become inseparably intertwined. While they may be circling in different directions, an innovative rejoinder is always just around the corner. The theme of the conference asked participants to re-consider the relationship between Design and the Digital. The notion of a cycle is already present in the syllable “re”. Indeed, 20 years earlier, in 2003, we held an ECAADE conference in Graz simply under the title “Digital Design” and our re-using – or is it re-cycling? – the theme can be seen as the completion of one of those cycles described above: One level up, we meet again, we’ve come full circle. The question of the relationship between Design and the Digital is still in flux, still worthy of renewed consideration. There is a historical notion implicit in the theme. To reconsider something, one needs to take a step back, to look into the past as well as into the future. Indeed, at this conference we wanted to take a longer view, something not done often enough in the fast-paced world of digital technology. Carefully considering one’s past can be a source of inspiration. In fact, the double spiral stair that inspired our conference logo also inspired many architects through the ages. Konrad Wachsmann, for example, is said to have come up with his famous Grapevine assembly system based on this double spiral stair and its intricate joinery. More recently, Rem Koolhaas deemed the double spiral staircase in Graz important enough to include a detailed model of it in his “elements of architecture” exhibition at the Venice Biennale in 2014. Our interpretation of the stair is a typically digital one, you might say. First of all: it’s a rendering of a virtual model; it only exists inside a computer. Secondly, this virtual model isn’t true to the original. Instead, it does what the digital has made so easy to do: it exaggerates. Where the original has just two spiral stairs that separate and join, our model consists of countless stairs that are joined in this way. We see only a part of the model, but the stairs appear to continue in all directions. The implication is of an endless field of spiral stairs. As the 3D model was generated with a parametric script, it would be very easy to change all parameters of it – including the number of stairs that make it up. Everyone at this conference is familiar with the concept of parametric design: it makes generating models of seemingly endless amounts of connected spiral stairs really easy. Although, of course, if we’re too literal about the term ‘endless’, generating our stair model will eventually crash even the most advanced computers. We know that, too. – That's another truth about the Digital: it makes a promise of infinity, which, in the end, it can’t keep. And even if it could: what’s the point of just adding more of the same: more variations, more options, more possible ways to get lost? Doesn’t the original double spiral staircase contain all those derivatives already? Don’t we know that ‘more’ isn’t necessarily better? In the original double spiral stair the happy end is guaranteed: the lovers’ paths meet at the top as well as when they exit the building. Therefore, the stair is also colloquially known as the Busserlstiege (the kissing stair) or the Versöhnungsstiege (reconciliation stair). In our digitally enhanced version, this outcome is no longer clear: we can choose between multiple directions at each level and we risk losing sight of the one we were with. This is also emblematic of our field of research. eCAADe was founded to promote “good practice and sharing information in relation to the use of computers in research and education in architecture and related professions” (see ecaade.org). That may have seemed a straightforward proposition forty years ago, when the association was founded. A look at the breadth and depth of research topics presented and discussed at this conference (and as a consequence in this book, for which you’re reading the editorial) shows how the field has developed over these forty years. There are sessions on Digital Design Education, on Digital Fabrication, on Virtual Reality, on Virtual Heritage, on Generative Design and Machine Learning, on Digital Cities, on Simulation and Digital Twins, on BIM, on Sustainability, on Circular Design, on Design Theory and on Digital Design Experimentations. We hope you will find what you’re looking for in this book and at the conference – and maybe even more than that: surprising turns and happy encounters between Design and the Digital.
series	eCAADe
type	normal paper
email
last changed	2024/08/29 08:36

_id	caadria2003_a7-1
id	caadria2003_a7-1
authors	Chantawit, D. and Hadikusumo, B.H.W.
year	2003
title	Integrated 4d Cad and Construction Safety Planning Information for a Better Safety Management
source	CAADRIA 2003 [Proceedings of the 8th International Conference on Computer Aided Architectural Design Research in Asia / ISBN 974-9584-13-9] Bangkok Thailand 18-20 October 2003, pp. 891-904
doi	https://doi.org/10.52842/conf.caadria.2003.891
summary	Safety is an important element of project successes. In the conventional project management, safety planning, as a function, is separated from other functions, such as planning/scheduling function. This separation creates difficulties for engineers to analyze what, when, why and where a safety measure is needed to prevent accidents in a construction activity. Another problem occurs due to the conventional practice of representing project designs using two-dimensional (2D) drawings. In this practice, a user (e.g. an engineer) has to convert the 2D drawings into three-dimensional (3D) mental pictures, and this is a tedious task. If only converting this 2D drawing is a tedious task, combining these 2D drawings with safety planning creates more difficult tasks. In order to address the problems, this paper discusses our research in integrating construction scheduling and safety planning in a 4D environment.
series	CAADRIA
last changed	2022/06/07 07:55

_id	cf2003_m_062
id	cf2003_m_062
authors	JUNG, T., GROSS, M. D. and DO, E. Y.-L.
year	2003
title	Light Pen - Sketching Light in 3D
source	Digital Design - Research and Practice [Proceedings of the 10th International Conference on Computer Aided Architectural Design Futures / ISBN 1-4020-1210-1] Tainan (Taiwan) 13–15 October 2003, pp. 327-338
summary	We describe a lighting design system driven by sketching on 3D virtual models. Conventional lighting design tools simulate the lighting effects of design decisions such as window locations, surface treatments, and fixture placement. Light Pen takes the inverse approach by allowing the designer to indicate desired illumination on a 3D model. This serves as input to a knowledge-based lighting design system, which recommends what lights to use and where to place them, based on the designer's expressed intentions and on the geometry of the space.
keywords	knowledge-based, lighting, sketch, virtual environment
series	CAAD Futures
email
last changed	2004/10/04 07:49

_id	sigradi2006_e149b
id	sigradi2006_e149b
authors	Kendir, Elif
year	2006
title	Prêt-à-Construire – An Educational Inquiry into Computer Aided Fabrication
source	SIGraDi 2006 - [Proceedings of the 10th Iberoamerican Congress of Digital Graphics] Santiago de Chile - Chile 21-23 November 2006, pp. 162-165
summary	This paper aims to show and discuss the relevance of developing necessary strategies for reintegrating the concept of fabrication into the architectural design process. The discussion will be partly based on the outcome of a graduate architectural design studio conducted in Spring semester 2002-2003. The graduate studio was part of a series of exploratory studies conducted on the nature of architectural design process transformed by information technologies. Preceded by studios investigating cognition and representation, this last studio focused on the concept of fabrication. The overarching aim of the studio series was to put CAD and CAM in context both within the actual architectural design process and within architectural education. The last of this series, which will be discussed within the frame of this paper, has specifically focused on CAM and the concept of fabrication in architecture. In accordance with the nature of a design studio, the research was more methodological than technical. The studio derived its main inspiration from the constructional templates used in dressmaking, which can be considered as an initial model for mass customization. In this context, the recladding of Le Corbusier’s Maison Domino was given as the main design problem, along with several methodological constraints. The main constraint was to develop the design idea through constructional drawings instead of representational ones. The students were asked to develop their volumetric ideas through digital 3D CAD models while working out structural solutions on a physical 1/50 model of Maison Domino. There was also a material constraint for the model, where only specified types of non-structural paper could be used. At this stage, origami provided the working model for adding structural strength to sheet materials. The final outcome included the explanation of different surface generation strategies and preliminary design proposals for their subcomponents. The paper will discuss both the utilized methodology and the final outcome along the lines of the issues raised during the studio sessions, some of which could be decisive in the putting into context of CAD – CAM in architectural design process. One such issue is mass customization, that is, the mass production of different specific elements with the help of CAM technologies. Another issue is “open source” design, indicating the possibility of a do-it-yourself architecture, where architecture is coded as information, and its code can be subject to change by different designers. The final key issue is the direct utilization of constructional drawings in the preliminary design phase as opposed to representational ones, which aimed at reminding the designer the final phase of fabrication right from the beginning. Finally, the paper will also point at the problems faced during the conduct of the studio and discuss those in the context of promoting CAM for architectural design and production in countries where there is no actual utilization of these technologies for these purposes yet.
keywords	Education; Fabrication; CAM
series	SIGRADI
email
last changed	2016/03/10 09:53

_id	eaea2005_151
id	eaea2005_151
authors	Ohno, Ruyzo
year	2006
title	Seat preference in public squares and distribution of the surrounding people: An examination of the validity of using visual simulation
source	Motion, E-Motion and Urban Space [Proceedings of the 7th European Architectural Endoscopy Association Conference / ISBN-10: 3-00-019070-8 - ISBN-13: 978-3-00-019070-4], pp. 151-163
summary	Public squares are shared by people who use them for various purposes. When people choose seats in a square, they unconsciously evaluate not only the physical characteristics of the space but also the distribution of others already present (Hall, 1966; Sommer, 1969; Whyte, 1988). Knowing the hidden rules of this behaviour will be important in designing squares that remain comfortable even in crowded situations. Most past studies of seat choice preference have reported on statistical tendencies derived from observations of subject behavior in actually existing sites (i.e., Abe, 1997; Imai, 1999; Kawamoto, 2003). However, they provide no clear theoretical model for explaining the basic mechanisms regulating such behaviour. The present study conducts a series of experiments in both real and virtual settings in order to extract quantitative relationships between subjects’ seat preferences and the presence of nearby strangers and to clarify what factors influence their seat choices.
series	EAEA
type	normal paper
email
more	http://info.tuwien.ac.at/eaea
last changed	2008/04/29 20:46

_id	caadria2003_c4-1
id	caadria2003_c4-1
authors	Santos, Eduardo T. and Derani, Luis A.
year	2003
title	An Immersive Virtual Reality System for Interior and Lighting Design
source	CAADRIA 2003 [Proceedings of the 8th International Conference on Computer Aided Architectural Design Research in Asia / ISBN 974-9584-13-9] Bangkok Thailand 18-20 October 2003, pp. 593-596
doi	https://doi.org/10.52842/conf.caadria.2003.593
summary	We are developing an immersive virtual reality system for interior and lighting design where, inside a CAVE(r), one can change at will the color, texture and finishing of all elements in the simulated environment (walls, floor, furniture and decoration) as well as position, type, color and intensity of all light sources. Although the rendering algorithm used in the system is the ray tracing, preliminary results show we are able to achieve almost real time performance. The system is intended to both help architects to better communicate their design ideas to clients through an advanced visualization tool and also speed up the interior and lighting design processes.
series	CAADRIA
email
last changed	2022/06/07 07:56

_id	caadria2003_b7-2
id	caadria2003_b7-2
authors	Schank-Smith, Kendra
year	2003
title	Festina Lente and the Digital World
source	CAADRIA 2003 [Proceedings of the 8th International Conference on Computer Aided Architectural Design Research in Asia / ISBN 974-9584-13-9] Bangkok Thailand 18-20 October 2003, pp. 951-962
doi	https://doi.org/10.52842/conf.caadria.2003.951
summary	In this paper, I would like to explore a comparison of the issues of quickness and festina lente as metaphoric or analogous for the computer and its use. Computers in the twenty first century are a vital part of architecture whether used for conception or realization. We as architects and educators must cont inually question their use in the design process and their appropriateness for visualization. We can know and understand more about the role of computers in our discipline, by seeing them in relation to ideas of quickness and festina lente. Italo Calvino in Six Memos for the Next Millennium defines quickness as having several qualities, the most important being economy of expression, time as relative, swift reasoning and consciousness. This involves quickness as being both 'intelligent and witty,' a matter of physical speed versus speed of the mind. The dichotomy of swiftness and slowness may help us question how these two elements are not necessarily adverse but rather by being understood together, they may help us better appreciate the strengths of the computer in architecture.
series	CAADRIA
email
last changed	2022/06/07 07:57

_id	acadia03_009
id	acadia03_009
authors	Shih, Naai-Jung
year	2003
title	Digital Architecture - What Would 6000 Points Turn Out To Be?
source	Connecting >> Crossroads of Digital Discourse [Proceedings of the 2003 Annual Conference of the Association for Computer Aided Design In Architecture / ISBN 1-880250-12-8] Indianapolis (Indiana) 24-27 October 2003, pp. 67-73
doi	https://doi.org/10.52842/conf.acadia.2003.067
summary	This paper presents students’ fulfillment of an assignment that explored the concepts of digital architecture using rapid prototyping (RP) process. A point cloud was given to students, and different representational data were substantiated as real 3D physical models. The presence of RP models and the sequential illustration of working steps in their reports revealed that the control of shapes often differed from what students perceived in VR worlds. The results thus confirm that physical models are useful for visualization as well as in design pedagogy.
series	ACADIA
email
last changed	2022/06/07 07:56

_id	ijac20031307
id	ijac20031307
authors	Tosello, Maria E.
year	2003
title	Performing Cyberspace: Dance, Technology and Virtual Architecture
source	International Journal of Architectural Computing vol. 1 - no. 3
summary	This project investigates the design, construction and experimentation in digital environments. The work intends to contribute to the evolution of the virtual universe by studying what can be particular architectural expressions of cyberspace. Specifically the project explores the potential architectural manifestations of existential situations in cyberspace. The design goal is to artistically express, through virtual environments, the invisible part of ourselves, our thoughts and emotions. This work critically engages the cyberPRINT, a ongoing creative-research project of Prof. Bermudez and the C.R.O.M.D.I team at the University of Utah in the U.S.A. [1] This project uses the cyberPRINT concept and technology of obtaining physiological data and translating them into digital spaces. However, it proposes a new "world" for the cyberPRINT. The final product consists in a performance where a dancer sends his biological signals to the computer to generate and transform digital environments, and also represents through his movements, the desired existential situation.
series	journal
more	http://www.multi-science.co.uk/ijac.htm
last changed	2007/03/04 07:08

_id	ecaade03_269_43_achten
id	ecaade03_269_43_achten
authors	Achten, Henri and Joosen, Gijs
year	2003
title	The Digital Design Process - Reflections on a Single Design Case
source	Digital Design [21th eCAADe Conference Proceedings / ISBN 0-9541183-1-6] Graz (Austria) 17-20 September 2003, pp. 269-274
doi	https://doi.org/10.52842/conf.ecaade.2003.269
summary	CAD tools are increasing their expressive and geometric power to enable a design process in which the computer model can be used throughout the whole design process for realizing the design. Such a process, in which other media such as physical scale models or drawings are no longer required by necessity to facilitate the design process, can be considered a digital design process. Rather than proposing that such a process is ideal – drawings and scale models should not be discarded – we feel that when taken as a starting point, the digital design process raises a number of new challenges to architectural design that deserve attention. These challenges concern the basic activities in design: exploration of the problem space, creating preliminary solutions, understanding consequences of design decisions, and so forth. In this paper we take the concrete design case of a graduation project that was developed from the start solely in CAD. We identify a number of key issues in that process such as continuous modeling, the model as design, continuous pliability, localized focus, and postponed decision. These issues not only have a technical, CAD-related aspect, but also are connected to architectural design. Most of these aspects are subject of contemporary debate in architectural design. On this basis, we can indicate where CAD is making a potential difference in architectural design.
keywords	Digital design, CAAD
series	eCAADe
email
more	http://www.ds.arch.tue.nl/General/Staff/henri
last changed	2022/06/07 07:54

_id	sigradi2003_096
id	sigradi2003_096
authors	Alvarez, Valeria and Albero, Constanza
year	2003
title	Una rama en la arquitectura de la era digital (A branch in architecture of the digital age)
source	SIGraDi 2003 - [Proceedings of the 7th Iberoamerican Congress of Digital Graphics] Rosario Argentina 5-7 november 2003
summary	Genetic information determines the germ of life, the first idea, that encloses all the power of creation. In every "germ" lays the identity, the strength to seek and fulfill expression in form. History, technical and scientific progress require new answers and provide new tools while encouraging investigation. A "Branch", a simple nature element, is reinterpreted into bits of information, reconstructed after being apprehended. This process reveals new elements that could have never been conceived with traditional methods. Nature and Technology complement each other in an embriological growing system that provides a new concept in the construction of real spaces.
series	SIGRADI
email
last changed	2016/03/10 09:47

_id	avocaad_2003_17
id	avocaad_2003_17
authors	Anna Maria Chrabin, Jaroslaw Szewczyk and Herman Neuckermans
year	2003
title	A Critical Evaluation of Early Stages Software in its Capacity of Coping with Contextual Issues
source	LOCAL VALUES in a NETWORKED DESIGN WORLD - ADDED VALUE OF COMPUTER AIDED ARCHITECTURAL DESIGN, Stellingwerff, Martijn and Verbeke, Johan (Eds.), (2004) DUP Science - Delft University Press, ISBN 90-407-2507-1.
summary	In this paper we analyse critically early design stages software in its capacity of coping with contextual data at large (i.e. representing cultural, aesthetical context, etc.). We identified 5 categories of early stages software: geometry based graphic editors, evaluation architectural software, generative and shape-grammar based systems, evolutionary systems and other systems. Calling the object under creation during of the early stages a CAD conceptual model, we will investigate to what extend this software allows the architect to experience and represent the context in which a design is situated. Especially we will focus on its capacity to allow interaction, playful interaction on our way to the design. Designers, and particularly architects, interact with the local context similarly to interacting in a game: the context influences the users’ decisions, surprises them and causes permanent changes to their ways of thinking. On the other hand, architects permanently shape and reshape the context, and reduce the context to a protean point of reference. Such behaviour characterises creative thinking that is crucial for the early stage of design. The investigation led us to the conclusions that the effective interactivity with the context needs simple rules, a plain interface and data reduced as simple as possible, especially when interaction with the context is performed during the early stages of a design process. The findings can be used in organising computer environments for early-stage design.
keywords	Architecture, Local values, Globalisation, Computer Aided Architectural Design
series	AVOCAAD
email
last changed	2006/01/16 21:38

_id	acadia03_042
id	acadia03_042
authors	Anzalone, Phillip and Clarke, Cory
year	2003
title	Architectural Applications of Complex Adaptive Systems
source	Connecting >> Crossroads of Digital Discourse [Proceedings of the 2003 Annual Conference of the Association for Computer Aided Design In Architecture / ISBN 1-880250-12-8] Indianapolis (Indiana) 24-27 October 2003, pp. 325-335
doi	https://doi.org/10.52842/conf.acadia.2003.325
summary	This paper presents methods and case studies of approaching architectural design and fabrication utilizing Complex Adaptive Systems (CASs). The case studies and observations described here are findings from a continuing body of research investigating applications of computational systems to architectural practice. CASs are computational mechanisms from the computer science field of Artificial Life that provide frameworks for managing large numbers of elements and their inter-relationships. The ability of the CASs to handle complexity at a scale unavailable through non-digital means provides new ways of approaching architectural design, fabrication, and practice.
series	ACADIA
email
last changed	2022/06/07 07:55

_id	sigradi2003_071
id	sigradi2003_071
authors	Arroyo, Julio and Chiarella, Mauro
year	2003
title	Laboratorio proyectual (Design Laboratory)
source	SIGraDi 2003 - [Proceedings of the 7th Iberoamerican Congress of Digital Graphics] Rosario Argentina 5-7 november 2003
summary	The concern about public space, digital graphic and a non-habitual theoretical background are the elements of an on-process research this paper relates to. The premise of the research is the current uncertain experience of both socio-cultural and physical-spatial public space in an Argentinean intermediate city. The focus is a workshop carried out to explore how forms for the public space may be designed when urban conditions are unstable, such the case of vacant areas, lost places or terrain-vague. Digital liquid shapes and post-structural concepts are alternative resources applied to this exploration that assumes the cultural and material complexity of our urban life.
series	SIGRADI
email
last changed	2016/03/10 09:47

_id	sigradi2003_004
id	sigradi2003_004
authors	Barros, Diana Rodríguez
year	2003
title	Hipermedios, metanodos y lógicas de cierre (Hypermedia, metanodes and logic of closure)
source	SIGraDi 2003 - [Proceedings of the 7th Iberoamerican Congress of Digital Graphics] Rosario Argentina 5-7 november 2003
summary	The present work is a contribution for the construction of a theorical perspective on the presence of metanodes and closing strategies in hypermedia readings about architecture and design. It particularly aims at describing, explaining and predicting these phenomena in relation to the positive attitudes they generate in processess of meaning construction and cognitive overflow. The results obtained are expected to help in producing guidelines and implications to be considered when systematizing the analysis and design of hypermedia on architecture and the city. It is part of the studies being currently carried out at the CEAC Center about hypermedia readings of urban fragments by non-expert users. (Project 15/B1001)
keywords	Hypermedia, design, metanodes, closing strategies
series	SIGRADI
email
last changed	2016/03/10 09:47

_id	cf2003_m_040
id	cf2003_m_040
authors	BAY, Joo-Hwa
year	2003
title	Making Rebuttals Available Digitally for Minimising Biases in Mental Judgements
source	Digital Design - Research and Practice [Proceedings of the 10th International Conference on Computer Aided Architectural Design Futures / ISBN 1-4020-1210-1] Tainan (Taiwan) 13–15 October 2003, pp. 147-156
summary	The problem of heuristic biases (illusions) discussed by Tversky and Kahneman (1982) that can lead to errors in judgement by human designers, when they use precedent knowledge presented graphically (Bay 2001). A Cognitive framework of belief, goal, and decision, and a framework of representation of architectural knowledge by Tzonis are used to map out the problem of heuristic biases in the human mind. These are used to discuss what aspects of knowledge can be presented explicitly and digitally to users to make rebuttal more available for human thinking at the cognitive level. The discussion is applicable to both inductive and analytic digital knowledge systems that use precedent knowledge. This discussion is targeted directly at means of addressing bias in the human mind using digital means. The problem of human bias in machine learning and generalisation are discussed in a different paper, and the problems of international or non-intentional machine bias are not part of discussion in this paper.
keywords	analogy, bias, design thinking, environmental design, heuristics
series	CAAD Futures
last changed	2003/11/22 07:26

_id	acadia03_015
id	acadia03_015
authors	Bernhardt, Matthew and Blostein, Beth
year	2003
title	APPROPRIATE LEVELS OF ACCESS: AN EMPIRICAL STUDY ON THE AVAILABILITY OF COMPUTERS IN STUDIO
source	Connecting >> Crossroads of Digital Discourse [Proceedings of the 2003 Annual Conference of the Association for Computer Aided Design In Architecture / ISBN 1-880250-12-8] Indianapolis (Indiana) 24-27 October 2003, pp. 119-127
doi	https://doi.org/10.52842/conf.acadia.2003.119
summary	One of the most significant technological challenges facing architecture schools today is how to provide an appropriate level of access to computing resources. As the computer has become a significant tool in the study and practice of architecture, students need to have access to that tool in order to further their studies. But in facing this question of access, what is “appropriate”? Is there such a thing as too much access? Is 1:1 access—a computer for every student—the minimum level of access that schools and students should accept? Or is there a point beyond which more resources just means more waste; computers sitting idle and unused, or students using the computer for unproductive ends? These questions were the subject of an experimental series of studios in the spring of 2002, wherein three studios were given varying numbers of computers for a term. The use of these computers was then tracked, and compared with previous terms. In tandem, the quality of work produced by these three studios was compared. While additional experiments are most likely needed to draw firm conclusions, the results of this experiment seem to support defining “an appropriate level of access” at less than 1:1.
series	ACADIA
type	normal paper
email
last changed	2022/06/07 07:52

_id	sigradi2003_094
id	sigradi2003_094
authors	Bessone, M., Mantovani, G. and Schanz, J.
year	2003
title	Multimedia y diseño arquitectónico diferente (Multimedia and different architectural design)
source	SIGraDi 2003 - [Proceedings of the 7th Iberoamerican Congress of Digital Graphics] Rosario Argentina 5-7 november 2003
summary	Hearing and touch may be incorporated into visual representation systems that historically covered creative process, now helped by multimedia. During 2002-2003 we developed an experimental design studio that challenged participants to design architecture from words (using their spelling, pronunciation, location, etc.) and through an inquiry based on the "concept of inwardness". Evoking a word from the association of images and texts as well as seizing its potential tactile and hearing dimensions completed what was a very interactive design process. Such process was utilized to generate images and ideas geared to design/make an "installation" to be displayed at art events.
keywords	Architecture, Design, Word, Image, Sound
series	SIGRADI
email
last changed	2016/03/10 09:47

For more results click below: