CumInCAD is a Cumulative Index about publications in Computer Aided Architectural Design
supported by the sibling associations ACADIA, CAADRIA, eCAADe, SIGraDi, ASCAAD and CAAD futures

PDF papers
References

Hits 1 to 20 of 603

_id sigradi2003_096
id sigradi2003_096
authors Alvarez, Valeria and Albero, Constanza
year 2003
title Una rama en la arquitectura de la era digital (A branch in architecture of the digital age)
source SIGraDi 2003 - [Proceedings of the 7th Iberoamerican Congress of Digital Graphics] Rosario Argentina 5-7 november 2003
summary Genetic information determines the germ of life, the first idea, that encloses all the power of creation. In every "germ" lays the identity, the strength to seek and fulfill expression in form. History, technical and scientific progress require new answers and provide new tools while encouraging investigation. A "Branch", a simple nature element, is reinterpreted into bits of information, reconstructed after being apprehended. This process reveals new elements that could have never been conceived with traditional methods. Nature and Technology complement each other in an embriological growing system that provides a new concept in the construction of real spaces.
series SIGRADI
email
last changed 2016/03/10 09:47

_id diss_anders
id diss_anders
authors Anders, P.
year 2003
title A Procedural Model for Integrating Physical and Cyberspaces in Architecture
source Doctoral dissertation, University of Plymouth, Plymouth, U.K
summary This dissertation articulates opportunities offered by architectural computation, in particular the digital simulation of space known as virtual reality (VR) and its networked, social variant cyberspace. Research suggests that environments that hybridize technologies call for a conception of space as information, i.e. space is both a product of and tool for cognition. The thesis proposes a model whereby architecture can employ this concept of space in creating hybrids that integrate physical and cyberspaces.The dissertation presents important developments in architectural computation that disclose concepts and values that contrast with orthodox practice. Virtual reality and cyberspace, the foci of this inquiry, are seen to embody the more problematic aspects of these developments. They also raise a question of redundancy: If a simulation is good enough, do we still need to build? This question, raised early in the 1990's, is explored through a thought experiment - the Library Paradox - which is assessed and critiqued for its idealistic premises. Still, as technology matures and simulations become more realistic the challenge posed by VR/cyberspace to architecture only becomes more pressing. If the case for virtual idealism seems only to be strengthened by technological and cultural trends, it would seem that a virtual architecture should have been well established in the decade since its introduction.Yet a history of the virtual idealist argument discloses the many difficulties faced by virtual architects. These include differences between idealist and professional practitioners, the failure of technology to achieve its proponents' claims, and confusion over the meaning of virtual architecture among both architects and clients. However, the dissertation also cites the success of virtual architecture in other fields - Human Computer Interface design, digital games, and Computer Supported Collaborative Work - and notes that their adoption of space derives from practice within each discipline. It then proposes that the matter of VR/cyberspace be addressed from within the practice of architecture, a strategy meant to balance the theoretical/academic inclination of previous efforts in this field.The dissertation pursues an assessment that reveals latent, accepted virtualities in design methodologies, instrumentation, and the notations of architectural practices. Of special importance is a spatial database that now pervades the design and construction processes. The unity of this database, effectively a project's cyberspace, and its material counterpart is the subject of the remainder of the dissertation. Such compositions of physical and cyberspaces are herein called cybrids. The dissertation examines current technologies that cybridize architecture and information technology, and proposes their integration within cybrid wholes. The concept of cybrids is articulated in seven principles that are applied in a case study for the design for the Planetary Collegium. The project is presented and critiqued on the basis of these seven principles. The dissertation concludes with a discussion of possible effects of cybrids upon architecture and contemporary culture.
series thesis:PhD
email
last changed 2005/09/09 12:58

_id acadia03_042
id acadia03_042
authors Anzalone, Phillip and Clarke, Cory
year 2003
title Architectural Applications of Complex Adaptive Systems
source Connecting >> Crossroads of Digital Discourse [Proceedings of the 2003 Annual Conference of the Association for Computer Aided Design In Architecture / ISBN 1-880250-12-8] Indianapolis (Indiana) 24-27 October 2003, pp. 325-335
doi https://doi.org/10.52842/conf.acadia.2003.325
summary This paper presents methods and case studies of approaching architectural design and fabrication utilizing Complex Adaptive Systems (CASs). The case studies and observations described here are findings from a continuing body of research investigating applications of computational systems to architectural practice. CASs are computational mechanisms from the computer science field of Artificial Life that provide frameworks for managing large numbers of elements and their inter-relationships. The ability of the CASs to handle complexity at a scale unavailable through non-digital means provides new ways of approaching architectural design, fabrication, and practice.
series ACADIA
email
last changed 2022/06/07 07:55

_id sigradi2003_075
id sigradi2003_075
authors Arroyo, Julio
year 2003
title Imagen del espacio público e imagen digital (Image of the public space and digital image)
source SIGraDi 2003 - [Proceedings of the 7th Iberoamerican Congress of Digital Graphics] Rosario Argentina 5-7 november 2003
summary This paper refers to the concept, image and meaning of the public space in media size cities. The premise is the displacement of the social comprehension and valuation of the public due to economical, political and cultural features of contemporary. The concept of public understood as an adjective of urban space moves to the public as a substantive that refers to a general condition of life in city. Digital image and its informational manipulation are the main resources for processing the public. The research depends on images both from its methodological or epistemological point of view.
series SIGRADI
email
last changed 2016/03/10 09:47

_id sigradi2003_071
id sigradi2003_071
authors Arroyo, Julio and Chiarella, Mauro
year 2003
title Laboratorio proyectual (Design Laboratory)
source SIGraDi 2003 - [Proceedings of the 7th Iberoamerican Congress of Digital Graphics] Rosario Argentina 5-7 november 2003
summary The concern about public space, digital graphic and a non-habitual theoretical background are the elements of an on-process research this paper relates to. The premise of the research is the current uncertain experience of both socio-cultural and physical-spatial public space in an Argentinean intermediate city. The focus is a workshop carried out to explore how forms for the public space may be designed when urban conditions are unstable, such the case of vacant areas, lost places or terrain-vague. Digital liquid shapes and post-structural concepts are alternative resources applied to this exploration that assumes the cultural and material complexity of our urban life.
series SIGRADI
email
last changed 2016/03/10 09:47

_id cf2011_p157
id cf2011_p157
authors Boton, Conrad; Kubicki Sylvain, Halin Gilles
year 2011
title Understanding Pre-Construction Simulation Activities to Adapt Visualization in 4D CAD Collaborative Tools
source Computer Aided Architectural Design Futures 2011 [Proceedings of the 14th International Conference on Computer Aided Architectural Design Futures / ISBN 9782874561429] Liege (Belgium) 4-8 July 2011, pp. 477-492.
summary Increasing productivity and efficiency is an important issue in the AEC field. This area is mainly characterized by fragmentation, heterogeneous teams with low lifetimes and many uncertainties. 4D CAD is one of the greatest innovations in recent years. It consists in linking a 3D model of the building with the works planning in order to simulate the construction evolution over time. 4D CAD can fill several needs from design to project management through constructivity analysis and tasks planning (Tommelein 2003). The literature shows that several applications have been proposed to improve the 4D CAD use (Chau et al. 2004; Lu et al. 2007; Seok & al. 2009). In addition, studies have shown the real impact of 4D CAD use in construction projects (Staub-French & Khanzode 2007; Dawood & Sika 2007). More recently, Mahalingam et al. (2010) showed that the collaborative use of 4D CAD is particularly useful during the pre-construction phase for comparing the constructability of working methods, for visually identifying conflicts and clashes (overlaps), and as visual tool for practitioners to discuss and to plan project progress. So the advantage of the 4D CAD collaborative use is demonstrated. Moreover, several studies have been conducted both in the scientific community and in the industrial world to improve it (Zhou et al. 2009; Kang et al. 2007). But an important need that remains in collaborative 4D CAD use in construction projects is about the adaptation of visualization to the users business needs. Indeed, construction projects have very specific characteristics (fragmentation, variable team, different roles from one project to another). Moreover, in the AEC field several visualization techniques can represent the same concept and actors choose one or another of these techniques according to their specific needs related to the task they have to perform. For example, the tasks planning may be represented by a Gantt chart or by a PERT network and the building elements can be depicted with a 3D model or a 2D plan. The classical view (3D + Gantt) proposed to all practitioners in the available 4D tools seems therefore not suiting the needs of all. So, our research is based on the hypothesis that adapting the visualization to individual business needs could significantly improve the collaboration. This work relies on previous ones and aim to develop a method 1) to choose the best suited views for performed tasks and 2) to compose adapted multiple views for each actor, that we call “business views”. We propose a 4 steps-method to compose business views. The first step identifies the users’ business needs, defining the individual practices performed by each actor, identifying his business tasks and his information needs. The second step identifies the visualization needs related to the identified business needs. For this purpose, the user’s interactions and visualization tasks are described. This enables choosing the most appropriate visualization techniques for each need (step 3). At this step, it is important to describe the visualization techniques and to be able to compare them. Therefore, we proposed a business view metamodel. The final step (step 4) selects the adapted views, defines the coordination mechanisms and the interaction principles in order to compose coordinated visualizations. A final step consists in a validation work to ensure that the composed views really match to the described business needs. This paper presents the latest version of the method and especially presents our latest works about its first and second steps. These include making more generic the business tasks description in order to be applicable within most of construction projects and enabling to make correspondence with visualization tasks.
keywords Pre-construction, Simulation, 4D CAD, Collaboration, Computer Supported Cooperative Work, Human-Computer Interface, Information visualization, Business view, Model driven engineering
series CAAD Futures
email
last changed 2012/02/11 19:21

_id sigradi2003_012
id sigradi2003_012
authors Cabello, D., López, L. and López, M.
year 2003
title Acido Surtido. Veintiocho miradas en formato editorial (Assorted Acid. Twenty eight views in publishing format)
source SIGraDi 2003 - [Proceedings of the 7th Iberoamerican Congress of Digital Graphics] Rosario Argentina 5-7 november 2003
summary Acido Surtido is a wide-ranging editorial project free of charge. Whose purpose is to create a place where visual thinking meets and juxtapose at random. Its active principles arise from the chaotic combination, in a 64 x 94 cm sheet of paper, of twenty eight graphic works developed in an independent and parallel way by an equal number of itinerant authors, and based on a frame topic from which plenty of visual ideas are launched. Through this "cadavre exquis" strategy, Acido Surtido calls on the reader's ability to re-elaborate and develop new interpretations, even new for those originally proposed by the authors. Acido Surtido is an offset printed centrefold, with an impression of 2000 copies.
keywords Miradas, yuxtaposición, editorial.
series SIGRADI
email
last changed 2016/03/10 09:47

_id caadria2003_c2-1
id caadria2003_c2-1
authors Chevrier, C., Bur, D. and Perrin, J. P.
year 2003
title Architecture as a Reference for the Development of A Cad Lighting Tool
source CAADRIA 2003 [Proceedings of the 8th International Conference on Computer Aided Architectural Design Research in Asia / ISBN 974-9584-13-9] Bangkok Thailand 18-20 October 2003, pp. 281-294
doi https://doi.org/10.52842/conf.caadria.2003.281
summary As light is increasingly perceived as a factor of quality of urban life, it is not surprising that cultural heritage buildings and even civil engineering works are being more and more often illuminated at night. The designers of the projects are revealing a nocturnal vision of the buildings which is often a reflection of the architecture: rhythm, pattern, evenness, symmetry, composition, axes, and so on. The idea of developing a "lighting-modeller" is based upon this assertion. Thus, if we express the needs in terms of functionalities, we can conclude that the hierarchical structure of the architectural edifice can fit in with a "lighting-structure". As a result, concepts like hierarchy, linking, grouping, networking, linearity-polarity, are the basis of the objects and functions that are effective for the great majority of buildings and projects. This "lighting-modeller" can then lead beyond its simulation capabilities to become a design conception tool: hypothesis and variants are quickly realized and tested, and technical data (illumination data, visual comfort) can be obtained as well.
series CAADRIA
email
last changed 2022/06/07 07:55

_id cf2003_m_001
id cf2003_m_001
authors CHEVRIER, Christine and PERRIN, Jean Pierre
year 2003
title ModLum - Illumination Project Aided Design Tool
source Digital Design - Research and Practice [Proceedings of the 10th International Conference on Computer Aided Architectural Design Futures / ISBN 1-4020-1210-1] Tainan (Taiwan) 13–15 October 2003, pp. 361-370
summary Illumination phenomena simulation is important for architectural project design and communication: simulation tools must assist efficiently the designer; results have to be reliable and realistic for the decision-makers. Indeed, it is very difficult, for a nonspecialist to imagine the result of an illumination from the light designer plans. Experience shows that the success of a photo-realistic simulation relies essentially on the choice of the light source characteristics and their correct positioning in the scene. This paper first presents the specificities of illumination projects (very large geometrical data bases enlightened by a large amount of light sources) and the difficulties of their set-up. Light arrangement requires tricky compositions, judicious choices and accurate studies. Currently there is no specific modeller for the handling of light sources as they are considered in radiosity software. Then we present the interactive tool we have developed, named ModLum, in order to set up light sources in a 3D architectural model in order to save time during the design step and simplify the source handling. ModLum specifications and principles are presented. Finally, an application is presented: the illumination project of two cloisters in Quito (Ecuador, South America).
keywords architecture, lighting, simulation
series CAAD Futures
last changed 2003/09/22 12:21

_id cf2003_m_015
id cf2003_m_015
authors CHIU, Yi-Chang and CHIU, Mao-Lin
year 2003
title Right Tools for Designing Free-form Geometry More than Representation and Manipulation
source Digital Design - Research and Practice [Proceedings of the 10th International Conference on Computer Aided Architectural Design Futures / ISBN 1-4020-1210-1] Tainan (Taiwan) 13–15 October 2003, pp. 433-444
summary This paper examines what the appropriate strategy for designers to handle the complex object is and how digital and conventional tools are involved in presenting and representing design artefacts for presenting design ideas and deliver design information, particularly in 3D free-form geometry. A series of precedent studies are conducted to examine the argument. The manipulation of digital tools is not merely a technical problem but a strategy about what the right tool for designing geometry is and how design process and principles are innovated. Two demonstrative projects are presented to illustrate how designers can better analyse and define the best choice of medium and design tools, and create a digital design platform to reach the merit of the tools created.
keywords design thinking, digital tools, free-form, prototype
series CAAD Futures
email
last changed 2003/09/22 12:21

_id 19ea
authors Dallhammer, Erich
year 2003
title The IKEA Factor - Driving elements of the development of shopping centresat the edges of European metropolitan regions
source CORP 2003, Vienna University of Technology, 25.2.-28.2.2003 [Proceedings on CD-Rom]
summary A house and a garden in the suburb, a car for each adult and a TV set with minidish. On weekdays mum and dad work, the children go to school or kindergarten. On Saturdays (or Sundays) the family goes shopping to the shopping centre, where they buy what they need, have a cheap meal and can see a film or just pass the time. That seems to be the way of life for a typical middle class family in the so-called western world, or at least what sitcoms, comics, adverts and films make people believe what it normally should be. That propagated way of living strongly influences people’s and especially consumers’ behavioural patterns and consequently spatialdevelopments, which are the present challenges for urban and regional planners.
series other
email
last changed 2003/03/11 20:39

_id sigradi2003_036
id sigradi2003_036
authors Donath, Dirk and González, Luis Felipe
year 2003
title Rule-based spaces configuration procedures to support user-designed housing
source SIGraDi 2003 - [Proceedings of the 7th Iberoamerican Congress of Digital Graphics] Rosario Argentina 5-7 november 2003
summary This article reports on our current explorations on systemizable tasks of architectural design and parametric design supported by rule-based generation methods of spatial configuration alternatives to assist user-design processes of progressive development low-cost dwellings. This exploration is part of an ongoing major research towards an integrated planning support system for low-income housing; we called Esther, which is focused on the development of a network-based set of tools to support logistics of self-designed /-built dwellings life-cycle. Esther addresses the systemized collaborative work between dwellers and specialists during the whole development cycle of dwellings.
keywords Planning tool; user-designed housing; parametric design; decision support; adaptable dwelling
series SIGRADI
email
last changed 2016/03/10 09:50

_id archidna_thesis
id archidna_thesis
authors Doo Young Kwon
year 2003
title ARCHIDNA: A GENREATIVE SYSTEM FOR SHAPE CONFIGURATONS
source University of Washington, Design Machine Group
summary his thesis concerns a new generation process for shape configurations using a set of operations. The approach derives from analyzing a particular design style and programming them into a computer. It discusses how generative CAD software can be developed that embodies a style and how this software can serve in the architectural design process as a computational design tool. The thesis proposes a prototype software system, ArchiDNA, to demonstrate the use of operations to generate drawings in a specific design style. ArchiDNA employs a set of operations to produce design drawings of shape configuration in Peter Eisenman's style for the Biocentrum building plan in Frankfurt, Germany. The principles of form generation are defined as a set of operations. ArchiDNA generates 2D and 3D drawings similar to Eisenmans plan and model for the Biocentrum building. The extension system of ArchiDNA, called ArchiDNA++, supports designers in defining operations and generating shape configurations. Designers can enter and edit their own shapes for the generation process and also control the parameters and attributes for shape operations. Thus, designers can manage the generation process and explore using ArchiDNA++, to generate shape configurations that are consistent with their own drawing style.
series thesis:MSc
type normal paper
email
last changed 2004/06/02 19:40

_id caadria2003_a6-2
id caadria2003_a6-2
authors Embi, M. Hamid, M. and Rafi, A.
year 2003
title Learning Basic Principles of Fire Regulations An Experimental Teaching and Learning Tool
source CAADRIA 2003 [Proceedings of the 8th International Conference on Computer Aided Architectural Design Research in Asia / ISBN 974-9584-13-9] Bangkok Thailand 18-20 October 2003, pp. 771-786
doi https://doi.org/10.52842/conf.caadria.2003.771
summary The study on integrating fire regulations into the design process is described through several study and analysis. However not all of them address the real issue of which fire regulation are difficult to be considered at the early stage of the design process. There are few factors on which fire regulation was not being considered at the early stage of the design. Two strong factors are the complexity of the regulations and the lack of knowledge among architects about fire regulations. Therefore fire requirements are always considered towards the end of the design process. This paper intends to address about the issue of difficulties in fire regulations and how we think these can be solve. We also design a system that can be used either by students or architects to understand the principles of the regulations and its applications in the design process. Finally a prototype system is demonstrated on how we envisage the system that can be used to help architects integrate fire regulations at the early stage of design process.
series CAADRIA
email
last changed 2022/06/07 07:55

_id ecaade03_381_134_fischer
id ecaade03_381_134_fischer
authors Fischer, Michal
year 2003
title Digital Czech Cubism
source Digital Design [21th eCAADe Conference Proceedings / ISBN 0-9541183-1-6] Graz (Austria) 17-20 September 2003, pp. 381-386
doi https://doi.org/10.52842/conf.ecaade.2003.381
summary Cubism is one of the great phenomena of Czech architecture and the use of digital technology opens up a new aspect of its significance. Digital models of both realised and unrealised buildings are becoming an important aid for research into the history of architecture and the teaching of this subject. The very process of the creation of the models enables deeper understanding of the principles of Cubist architecture.
keywords 3D modelling; Virtual architecture; history research
series eCAADe
email
more http://web.cvut.cz/fa/u516/
last changed 2022/06/07 07:50

_id cf2003_m_097
id cf2003_m_097
authors FRÖST, Peter
year 2003
title A Real Time 3D Environment for Collaborative Design
source Digital Design - Research and Practice [Proceedings of the 10th International Conference on Computer Aided Architectural Design Futures / ISBN 1-4020-1210-1] Tainan (Taiwan) 13–15 October 2003, pp. 203-212
summary By setting up collaborative design processes in architecture it is possible to considerably improve the integration of customer needs and ideas into the programming phase of a building project. Our design process includes active collaboration between customers, users and other stakeholders as well as the use of virtual environments in conceptual design. The output from the process is treated as visualised input to the architectural programming. The work presented focuses on developing digital tools to support this collaborative design dialogue. We have developed an extremely “easy to use” digital modelling tool called “ForeSite Designer”. The tool enables the users to build layouts of prefabricated components on a building site in 2D. This 2D layout can then instantly be exported to a lit-up real time 3D environment in the computer game “Half-Life.” ForeSite Designer has been used in a several design events with different settings. This paper presents the tool and one project where it was utilized. The results show that ForeSite Designer can promote dialogue and collaborative design work among the participants. We have also found that it is important how the virtual environment and its components are visually designed in order to support the dialogue and collaborative design work.
keywords collaboration, customer, real time, virtual environment
series CAAD Futures
last changed 2003/09/22 12:21

_id sigradi2006_e028c
id sigradi2006_e028c
authors Griffith, Kenfield; Sass, Larry and Michaud, Dennis
year 2006
title A strategy for complex-curved building design:Design structure with Bi-lateral contouring as integrally connected ribs
source SIGraDi 2006 - [Proceedings of the 10th Iberoamerican Congress of Digital Graphics] Santiago de Chile - Chile 21-23 November 2006, pp. 465-469
summary Shapes in designs created by architects such as Gehry Partners (Shelden, 2002), Foster and Partners, and Kohn Peterson and Fox rely on computational processes for rationalizing complex geometry for building construction. Rationalization is the reduction of a complete geometric shape into discrete components. Unfortunately, for many architects the rationalization is limited reducing solid models to surfaces or data on spread sheets for contractors to follow. Rationalized models produced by the firms listed above do not offer strategies for construction or digital fabrication. For the physical production of CAD description an alternative to the rationalized description is needed. This paper examines the coupling of digital rationalization and digital fabrication with physical mockups (Rich, 1989). Our aim is to explore complex relationships found in early and mid stage design phases when digital fabrication is used to produce design outcomes. Results of our investigation will aid architects and engineers in addressing the complications found in the translation of design models embedded with precision to constructible geometries. We present an algorithmically based approach to design rationalization that supports physical production as well as surface production of desktop models. Our approach is an alternative to conventional rapid prototyping that builds objects by assembly of laterally sliced contours from a solid model. We explored an improved product description for rapid manufacture as bilateral contouring for structure and panelling for strength (Kolarevic, 2003). Infrastructure typically found within aerospace, automotive, and shipbuilding industries, bilateral contouring is an organized matrix of horizontal and vertical interlocking ribs evenly distributed along a surface. These structures are monocoque and semi-monocoque assemblies composed of structural ribs and skinning attached by rivets and adhesives. Alternative, bi-lateral contouring discussed is an interlocking matrix of plywood strips having integral joinery for assembly. Unlike traditional methods of building representations through malleable materials for creating tangible objects (Friedman, 2002), this approach constructs with the implication for building life-size solutions. Three algorithms are presented as examples of rationalized design production with physical results. The first algorithm [Figure 1] deconstructs an initial 2D curved form into ribbed slices to be assembled through integral connections constructed as part of the rib solution. The second algorithm [Figure 2] deconstructs curved forms of greater complexity. The algorithm walks along the surface extracting surface information along horizontal and vertical axes saving surface information resulting in a ribbed structure of slight double curvature. The final algorithm [Figure 3] is expressed as plug-in software for Rhino that deconstructs a design to components for assembly as rib structures. The plug-in also translates geometries to a flatten position for 2D fabrication. The software demonstrates the full scope of the research exploration. Studies published by Dodgson argued that innovation technology (IvT) (Dodgson, Gann, Salter, 2004) helped in solving projects like the Guggenheim in Bilbao, the leaning Tower of Pisa in Italy, and the Millennium Bridge in London. Similarly, the method discussed in this paper will aid in solving physical production problems with complex building forms. References Bentley, P.J. (Ed.). Evolutionary Design by Computers. Morgan Kaufman Publishers Inc. San Francisco, CA, 1-73 Celani, G, (2004) “From simple to complex: using AutoCAD to build generative design systems” in: L. Caldas and J. Duarte (org.) Implementations issues in generative design systems. First Intl. Conference on Design Computing and Cognition, July 2004 Dodgson M, Gann D.M., Salter A, (2004), “Impact of Innovation Technology on Engineering Problem Solving: Lessons from High Profile Public Projects,” Industrial Dynamics, Innovation and Development, 2004 Dristas, (2004) “Design Operators.” Thesis. Massachusetts Institute of Technology, Cambridge, MA, 2004 Friedman, M, (2002), Gehry Talks: Architecture + Practice, Universe Publishing, New York, NY, 2002 Kolarevic, B, (2003), Architecture in the Digital Age: Design and Manufacturing, Spon Press, London, UK, 2003 Opas J, Bochnick H, Tuomi J, (1994), “Manufacturability Analysis as a Part of CAD/CAM Integration”, Intelligent Systems in Design and Manufacturing, 261-292 Rudolph S, Alber R, (2002), “An Evolutionary Approach to the Inverse Problem in Rule-Based Design Representations”, Artificial Intelligence in Design ’02, 329-350 Rich M, (1989), Digital Mockup, American Institute of Aeronautics and Astronautics, Reston, VA, 1989 Schön, D., The Reflective Practitioner: How Professional Think in Action. Basic Books. 1983 Shelden, D, (2003), “Digital Surface Representation and the Constructability of Gehry’s Architecture.” Diss. Massachusetts Institute of Technology, Cambridge, MA, 2003 Smithers T, Conkie A, Doheny J, Logan B, Millington K, (1989), “Design as Intelligent Behaviour: An AI in Design Thesis Programme”, Artificial Intelligence in Design, 293-334 Smithers T, (2002), “Synthesis in Designing”, Artificial Intelligence in Design ’02, 3-24 Stiny, G, (1977), “Ice-ray: a note on the generation of Chinese lattice designs” Environmental and Planning B, volume 4, pp. 89-98
keywords Digital fabrication; bilateral contouring; integral connection; complex-curve
series SIGRADI
email
last changed 2016/03/10 09:52

_id caadria2003_b6-1
id caadria2003_b6-1
authors Howe, A.S., Kang, P. and Nasari, Omid
year 2003
title Digiosk Digital Design to Robotic Deployment in Two Months
source CAADRIA 2003 [Proceedings of the 8th International Conference on Computer Aided Architectural Design Research in Asia / ISBN 974-9584-13-9] Bangkok Thailand 18-20 October 2003, pp. 811-826
doi https://doi.org/10.52842/conf.caadria.2003.811
summary In this paper, we discuss Kit-of-parts Theory and how it applies to the design, manufacture, and operation of a small robotic deployable demonstration structure called the Digiosk (Howe, 2001). "Kit-of-parts Theory" refers to the study and application of objectoriented building techniques, where building components are predesigned / pre-engineered / pre-fabricated for inclusion in joint-based (linear element), panel-based (planar element), module-based (solid element), and deployable (time element) construction systems. The Digiosk is an exposition display kiosk that was designed and manufactured digitally, and brought from concept to robotic functionality in a short period of time. Using kinematic mechanisms the cylinder opens up and deploys into a 2.7m cubical display booth complete with integral power and network connections. The kiosk was designed using a solid modeler, from which data was extracted to drive digital manufacturing processes. Owing to the well-developed understanding of Kit-of-parts Theory and the new "kinematic architecture" principles, the paperless process yielded a working prototype only eight weeks after initial conceptualization. The paper concludes with a discussion of how these concepts can be applied to large-scale projects and design processes.
series CAADRIA
email
last changed 2022/06/07 07:50

_id cf2003_k_002
id cf2003_k_002
authors KALAY, Yehuda and MARX, John
year 2003
title Changing the Metaphor: Cyberspace as a Place
source Digital Design - Research and Practice [Proceedings of the 10th International Conference on Computer Aided Architectural Design Futures / ISBN 1-4020-1210-1] Tainan (Taiwan) 13–15 October 2003, pp. 19-28
summary Cyberspace is quickly becoming an alternative ‘place’ for everyday economic, cultural, and other human activities. It ought, therefore, to be designed according to the principles, theories, experiences, and practices that have been guiding physical placemaking for thousands of years, rather than the woefully inadequate metaphor of the printed page. 3D Cyber-places must embrace the essential characteristics that make a ‘place’ in physical space, while at the same time take advantage of the opportunities offered by Cyberspace. By looking at physical architecture as a case study and metaphor for organizing space into meaningful places, this paper discusses the possibility of organizing Cyberspace into spatial settings that, like physical places, afford social interaction and embody cultural values.
keywords cyberspace, virtual reality, place-making
series CAAD Futures
email
last changed 2003/09/22 12:21

_id acadia03_000
id acadia03_000
authors Klinger, Kevin (Ed.)
year 2003
title Connecting >> Crossroads of Digital Discourse
source Proceedings of the 2003 Annual Conference of the Association for Computer Aided Design In Architecture / ISBN 1-880250-12-8, Indianapolis (Indiana) 24-27 October 2003, 436 p.
doi https://doi.org/10.52842/conf.acadia.2003
summary Architecture is presently engaged in an impatient search for solutions to critical questions about the nature and the identity of the discipline. Meanwhile, evolving digital technology continues to serve as a key agent for prevailing innovations and new ideas in architecture. Still, this feels familiar, as technology has always been a catalyst for new ideas in architecture. A positive digital future in architecture requires a clearer definition of principles and skills necessary to maintain a rigor in emerging digital projects/projections. At the same time, recognition about the significance of the already existing digital scholarship in architecture must be connected with emerging lines of inquiry evolving within the discipline. Healthy disciplines remain tolerant of a state of flux by constantly questioning the inclusion|exclusion, import|export, and collaboration|isolation to|from new ideas, new techniques, new disciplines, and new technology. At the perimeter of this nebulous exchange, an innovative new digital discourse is emerging that offers some unexpected new conduits to an attentive discipline of architecture. Topic nodes have evolved which augment this discourse with overlapping issues, as well as a particular set of important distinctions from one another: Digital Pedagogy, Digital Tools, Digital Production/ Fabrication, Digital Visualization, Digital Projects, Digital Design, Digital Representation, Digital Thinking, and Digital Practice.
series ACADIA
email
more www.acadia.org
last changed 2022/06/07 07:49

For more results click below:

this is page 0show page 1show page 2show page 3show page 4show page 5... show page 30HOMELOGIN (you are user _anon_724887 from group guest) CUMINCAD Papers Powered by SciX Open Publishing Services 1.002