Cumincad : CUMINCAD Papers : Search Results

CumInCAD is a Cumulative Index about publications in Computer Aided Architectural Design
supported by the sibling associations ACADIA, CAADRIA, eCAADe, SIGraDi, ASCAAD and CAAD futures

PDF papers
References

Hits 1 to 20 of 603

Reformat results as: short short into frame detailed detailed into frame

_id	ecaade03_269_43_achten
id	ecaade03_269_43_achten
authors	Achten, Henri and Joosen, Gijs
year	2003
title	The Digital Design Process - Reflections on a Single Design Case
doi	https://doi.org/10.52842/conf.ecaade.2003.269
source	Digital Design [21th eCAADe Conference Proceedings / ISBN 0-9541183-1-6] Graz (Austria) 17-20 September 2003, pp. 269-274
summary	CAD tools are increasing their expressive and geometric power to enable a design process in which the computer model can be used throughout the whole design process for realizing the design. Such a process, in which other media such as physical scale models or drawings are no longer required by necessity to facilitate the design process, can be considered a digital design process. Rather than proposing that such a process is ideal – drawings and scale models should not be discarded – we feel that when taken as a starting point, the digital design process raises a number of new challenges to architectural design that deserve attention. These challenges concern the basic activities in design: exploration of the problem space, creating preliminary solutions, understanding consequences of design decisions, and so forth. In this paper we take the concrete design case of a graduation project that was developed from the start solely in CAD. We identify a number of key issues in that process such as continuous modeling, the model as design, continuous pliability, localized focus, and postponed decision. These issues not only have a technical, CAD-related aspect, but also are connected to architectural design. Most of these aspects are subject of contemporary debate in architectural design. On this basis, we can indicate where CAD is making a potential difference in architectural design.
keywords	Digital design, CAAD
series	eCAADe
email
more	http://www.ds.arch.tue.nl/General/Staff/henri
last changed	2022/06/07 07:54

_id	acadia03_002
id	acadia03_002
authors	Anders, Peter
year	2003
title	Four Degrees Of Freedom
doi	https://doi.org/10.52842/conf.acadia.2003.x.s7a
source	Connecting >> Crossroads of Digital Discourse [Proceedings of the 2003 Annual Conference of the Association for Computer Aided Design In Architecture / ISBN 1-880250-12-8] Indianapolis (Indiana) 24-27 October 2003, p. 17
summary	Letting go is hard to do. Remember back to when, after months of trying, you let go of the handlebars of your bicycle and sailed down the street, effortless and assured. It was a freedom born of mastery, balance and technique. You had let go, but were in control. Technique extends to other devices as well and we are here to discuss architectural computation. Here too, as we will see, mastery is shown by letting go. These papers explore new degrees of freedom in design computation. Each is on a separate aspect of architecture, whether it be aesthetics, process, or structure. Two papers inquire into the entities of design and the processes by which they are manifested. They pose important questions. If we can affect the course of design going forward, are we free to change its past? By defining the characteristics of objects at the outset, are we through automation free to choose from a refined spectrum of outcomes? From the evidence of these papers, the answer to both questions is yes. Through the agency of parametric design we can affect the future and past of architectural processes and their products. Rather than being locked into rigid, linear decisions we are temporally free to choose, tweak and modify. Choice and chance play an important role in aesthetics as well. This has become emblematic of design trends as we have seen in recent years. One of our papers addresses the indeterminacy of particle systems in the design of a monument to the victims of 9/11. By letting go of the handlebars of the computer, the author has been freed to new, poetic forms and processes. Another paper opens urban design to its client community by use of a sophisticated web site. In the tradition of populist innovators like Charles Moore and Lucien Kroll, the authors have extended the design process beyond the office walls to the city itself. The designers, by loosening their grip on the project have made the effort democratic and participatory. Intriguingly, at the end of the paper, they note that this use of cyberspace opens the door to a non-physical architecture. Could architecture, then, let go its materialist biases as well? We hope to engage this and other questions shortly.We are pleased then, to share with you these insights and projects. Wassim and I hope that these presentations will be as liberating for you as they were for us.
series	ACADIA
email
last changed	2022/06/07 07:49

_id	avocaad_2003_17
id	avocaad_2003_17
authors	Anna Maria Chrabin, Jaroslaw Szewczyk and Herman Neuckermans
year	2003
title	A Critical Evaluation of Early Stages Software in its Capacity of Coping with Contextual Issues
source	LOCAL VALUES in a NETWORKED DESIGN WORLD - ADDED VALUE OF COMPUTER AIDED ARCHITECTURAL DESIGN, Stellingwerff, Martijn and Verbeke, Johan (Eds.), (2004) DUP Science - Delft University Press, ISBN 90-407-2507-1.
summary	In this paper we analyse critically early design stages software in its capacity of coping with contextual data at large (i.e. representing cultural, aesthetical context, etc.). We identified 5 categories of early stages software: geometry based graphic editors, evaluation architectural software, generative and shape-grammar based systems, evolutionary systems and other systems. Calling the object under creation during of the early stages a CAD conceptual model, we will investigate to what extend this software allows the architect to experience and represent the context in which a design is situated. Especially we will focus on its capacity to allow interaction, playful interaction on our way to the design. Designers, and particularly architects, interact with the local context similarly to interacting in a game: the context influences the users’ decisions, surprises them and causes permanent changes to their ways of thinking. On the other hand, architects permanently shape and reshape the context, and reduce the context to a protean point of reference. Such behaviour characterises creative thinking that is crucial for the early stage of design. The investigation led us to the conclusions that the effective interactivity with the context needs simple rules, a plain interface and data reduced as simple as possible, especially when interaction with the context is performed during the early stages of a design process. The findings can be used in organising computer environments for early-stage design.
keywords	Architecture, Local values, Globalisation, Computer Aided Architectural Design
series	AVOCAAD
email
last changed	2006/01/16 21:38

_id	acadia03_044
id	acadia03_044
authors	Bermúdez, Julio and Foresti, Stefano
year	2003
title	Information Visualization
doi	https://doi.org/10.52842/conf.acadia.2003.x.p5s
source	Connecting >> Crossroads of Digital Discourse [Proceedings of the 2003 Annual Conference of the Association for Computer Aided Design In Architecture / ISBN 1-880250-12-8] Indianapolis (Indiana) 24-27 October 2003, p. 346
summary	Digital visualization addresses representational challenges from within and without architecture. ‘Disciplinary’ digital visualization is used to explore, understand and communicate architectural information associated with the production of buildings. 3D modeling, rendering, animation and VR as well as the power of digital media to permit the seamless integration of various data types are unleashing completely new ways to display architecture. As digital power continues to increase and get cheaper, portability and wi-fi networks take root, and visualization work becomes even more main stream, we can expect growing changes in the way the design process is conducted, buildings are presented and documented, and the public and 3rd party’s demands from professional services. This demands a more conscious research/pedagogies aimed at developing new representation conventions.
series	ACADIA
email
last changed	2022/06/07 07:49

_id	c5c5
id	c5c5
authors	Calderon, C., Cavazza M. and Diaz, D.
year	2003
title	A NEW APPROACH TO VIRTUAL DESIGN FOR SPATIAL CONFIGURATION PROBLEMS,
source	7th IEEE International Information Visualisation Conference, London, UK, 16-17 July 2003. http://www.graphicslink.demon.co.uk/IV03/
summary	In this paper, we present a new framework for the use of Virtual Reality (VR) in engineering design for configuration applications. Traditional VR systems support the visual exploration of a design solution but do not assist the user in exploring alternative solutions based on domain knowledge. Extending previous work in the area of Intelligent Virtual Environment, we propose an intelligent configuration system based on constraint logic programming (CLP), integrated in a real-time 3D graphic environment. This type of integration facilitates the expression of design knowledge in the VE and enables the user to interactively solve and/or refine a spatial configuration problem. In the system described in this paper, the user can visually explore configurations, but his interaction with objects of the configuration problem triggers new cycles of constraint propagation from the modified configuration to produce a new compatible solution.
keywords	Virtual Reality, Virtual Design
series	other
type	normal paper
email
last changed	2005/12/02 11:31

_id	ecaade03_659_166_hungming
id	ecaade03_659_166_hungming
authors	Cheng, Hung-Ming
year	2003
title	A digital modeling with reasoning system in early phase of design
doi	https://doi.org/10.52842/conf.ecaade.2003.659
source	Digital Design [21th eCAADe Conference Proceedings / ISBN 0-9541183-1-6] Graz (Austria) 17-20 September 2003, pp. 659-664
summary	This study describes statue in the early phase of design, the approach taken by its conceptual development and manipulation. And on the developing digital tools provide a computational support for the process of indexing and retrieving. The digital modeling also addresses specifically architectural programming, adjacent relationship between the building element and articulation in designing. The overall in building mass development starting with reasoning of the conceptual model in early phase try to find evocative cases to help designer thinking. And finally discuss some issues and challenges of artificial intelligent. The research for representing designer’s creativity and searching solution provide another way to generate an articulating conceptual model. The integration approach of research starts with the pure case-based and rule-based reasoning system to help designer generate more understandable and creative product in the architectural design application.
keywords	Case-based reasoning, conceptual model, computer aided design, buildingmass development, design process
series	eCAADe
email
last changed	2022/06/07 07:55

_id	cf_2003_000
id	cf_2003_000
authors	Chiu, M.-L., Tsou, J.-Y., Kvan, Th., Morozumi, M. and Jeng, T.-S. (Eds.)
year	2003
title	Digital Design - Research and Practice
source	Proceedings of the 10th International Conference on Computer Aided Architectural Design Futures / ISBN 1-4020-1210-1 / Tainan (Taiwan) 13–15 October 2003, 464 p.
summary	The use of computers in the design of the built environment has reached a watershed. From peripheral devices in the design process, they have in recent years come to take centre stage. An illustration is immediately at hand. Just as the entries to the competition for the Chicago Tribune Tower in 1922 defined the state-of-the-art at the beginning of the twentieth century, we have a similar marker at the end of the century, the competition in 2002 to replace the World Trade Centre towers in Lower Manhattan offered us a range of architectural solutions that exemplified the state-of-the-art eighty years later, setting forth not only architectural statements but also illustrating clearly the importance of computers in the design of the built environment. In these entries of 2002, we can see that computers have not only become essential to the communication of design but in the investigation and generation of structure, form and composition. The papers in this book are the current state-of-the-art in computer-aided design as it stands in 2003. It is the tenth in a series sponsored by the CAAD Futures Foundation, compiled from papers presented at the biennial CAAD Futures Conferences. As a series, the publications have charted the steady progress in developing the theoretical and practical foundations for applications in design practice. This volume continues in that tradition; thus, this book is entitled Digital Design: Research and Practice. The papers are grouped into three major categories, reflecting thrusts of research and practice, namely: Data and information: its organisation, handling and access, including agents; Virtual worlds: their creation, application and interfaces; and Analysis and creation of form and fabric. The editors received 121 abstracts after the initial call for contributions. From these, 61 abstracts were selected for development into complete papers for further review. From these submissions, 39 papers were chosen for inclusion in this publication. These papers show that the field has evolved from theoretical and development concerns to questions of practice in the decade during which this conference has showcased leading work. Questions of theoretical nature remain as the boundaries of our field expand. As design projects have grasped the potentials of computer-aided design, so have they challenged the capabilities of the tools. Papers here address questions in geometric representation and manipulation (Chiu and Chiu; Kocaturk, Veltkamp and Tuncer), topics that may have been considered to be solved. As design practice becomes increasingly knowledge based, better ways of managing, manipulating and accessing the complex wealth of design information becomes more pressing, demanding continuing research in issues such as modelling (Yang; Wang; Zreik et al), data retrieval and querying (Hwang and Choi; Stouffs and Cumming; Zreik, Stouffs, Tuncer, Ozsariyildiz and Beheshti), new modes of perceiving data (Segers; Tan). Tools are needed to manage, mine and create information for creative work, such as agents (Liew and Gero; Smith; Caneparo and Robiglio; Ding et al) or to support design processes (Smith; Chase). Systems for the support and development of designs continue (Gero; Achten and Jessurun). As progress is made on some fronts, such as user interfaces, attention is again turned to previously research areas such as lighting (Jung, Gross and Do; Ng et al; Wittkopf; Chevier; Glaser, Do and Tai) or services (Garcia; Chen and Lin). In recent years the growth of connectivity has led to a rapid growth in collaborative experience and understanding of the opportunities and issues continues to mature (Jabi; Dave; Zamenopoulos and Alexiou). Increasing interest is given to implications in practice and education (Dave; Oxman; Caneparo, Grassi and Giretti). Topics new to this conference are in the area of design to production or manufacture (Fischer, Burry and Frazer; Shih). Three additional invited papers (Rekimoto; Liu; Kalay) provide clear indication that there is still room to develop new spatial concepts and computer augmented environments for design. In conclusion, we note that these papers represent a good record of the current state of the evolving research in the field of digital design.
series	CAAD Futures
email
more	http://www.caadfutures.arch.tue.nl/
last changed	2003/09/22 12:21

_id	ee5c
id	ee5c
authors	D Gunaratnam, T Degroff and JS Gero
year	2003
title	IMPROVING NEURAL NETWORK MODELS OF PHYSICAL SYSTEMS THROUGH DIMENSIONAL ANALYSIS
source	Journal of Applied Soft Computing 2(4): 283-296.
summary	The paper presents a technique for generating concise neural network models of physical systems. The neural network models are generated through a two-stage process. The first stage uses information embedded in the dimensions or units in which the data is represented. Dimensional analysis techniques are used initially to make this information explicit, and a limited search in the neural network architecture space is then conducted to determine dimensionless representations of variables/parameters that perform well for a given model complexity. The second stage uses information available in the numerical values of the data to search for high-level dimensionless variables/parameters, generated from simple combinations of dimensionless quantities generated in the first stage and which result in concise neural network models with improved performance characteristics. The search for these high-level dimensionless variables/parameters is conducted in an enhanced representation space using functional link networks with flat or near flat architectures. The use and effectiveness of the technique is demonstrated for three applications. The first is the design and analysis of reinforced concrete beams, which is representative of the class of problems associated with the design and analysis of composites. The second is the classical elastica problem, for predicting non-linear post-buckled behaviour of columns and the third, the analysis of a bent bar under a specified combination of loads.
keywords	neural networks, dimensional analysis
series	journal
type	normal paper
email
last changed	2004/04/10 01:57

_id	ecaade03_527_71_donath
id	ecaade03_527_71_donath
authors	Donath, Dirk and Weferling, Ulrich
year	2003
title	Digital building surveying and planning Integrative approaches with commercial object-oriented CAAD systems
doi	https://doi.org/10.52842/conf.ecaade.2003.527
source	Digital Design [21th eCAADe Conference Proceedings / ISBN 0-9541183-1-6] Graz (Austria) 17-20 September 2003, pp. 527-532
summary	As a result of growing activity in the field of renovation and building within existing built contexts, modern digital tools and methods are increasingly in demand. Support of the planning process means: the step-by-step capture of building-relevant information, a rule and parameter-based development of solutions and the combination of traditional and automated methods and technologies used for model creation (building surveying) and model transformation (planning). This article discusses general requirements and the results from our own research and development as well as illustrating how building surveying can already contribute to the planning process more effectively using currently available tools.
keywords	Planning, Building surveying, Process model, CAAD, IT-planning tools, renovation, 3D-model, information systems
series	eCAADe
email
more	http://infar.architektur.uni-weimar.de
last changed	2022/06/07 07:55

_id	6915
authors	Dorninger, Peter
year	2003
title	XML Technologies and Geodata
source	CORP 2003, Vienna University of Technology, 25.2.-28.2.2003 [Proceedings on CD-Rom]
summary	Photogrammetry and Remote Sensing are very important methods for acquisition of geodata. During the previous decade, severalrevolutionary changes occurred in this area. Until the appearance of automated image analysis tools, it was necessary to measureselected points in the images given. At that time, it was much faster and even cheaper to get images of real world objects compared tothe time and money consuming process of manual analyses. So one tried to minimize this effort by measuring only characteristicpoints such as edges, break-lines, peaks and valleys and, for sure, a grid with a given grid step which was selected to meet the efforts.Lots of information in the images was neglected.Digital point matching algorithms and airborne laser scanning provide many new possibilities. The only restriction on spatialresolution is the one of the used sensors. Given a more precise image sensor, the matching algorithm will be able to match moresurface points; given a higher frequency laser scanner, more points can be measured of the same area. And those sensors get moreand more precise every day. Besides, those techniques allow for fast repetition which is necessary to create time series as a basis for4D modeling! However, this fact is accompanied by several problems concerning the capability of available computers. Some years ago, as the first ideas of 3D city models arose, it was very difficult to acquire the necessary data. Today the new sensors and methods have thenecessary capability, but we are not able to handle the available datasets efficiently, because of shortcomings in the past. In a time ofworld wide data exchange through the internet and global datasets, it is necessary to have efficient methods and algorithms tomanage the available data. There is a need for international, vendor independent data exchange and management standards that haveto be accepted and supported by the industry. This article is going to present several methods of data encoding using standardized data formats based on eXtensible Markup Language (XML). After an introduction to this kind of data encoding, two derived applications for management, storage and presentation of geodata are described. As XML data is written in text format, the datasets have the ability to become rather long.Therefore some promising methods to reduce the amount of data are introduced afterwards. XML documents are mainly used fordata exchange between databases. Therefore the capabilities of commonly used database systems for storage of geodata are describedin the end and current implementation results of the Institute of Photogrammetry and Remote Sensing (I.P.F.) are presented.
series	other
email
last changed	2003/03/11 20:39

_id	ecaade03_665_181_duarte
id	ecaade03_665_181_duarte
authors	Duarte, José P.
year	2003
title	A Discursive Grammar for Customizing Mass Housing - The case of Siza´s houses at Malagueira
doi	https://doi.org/10.52842/conf.ecaade.2003.665
source	Digital Design [21th eCAADe Conference Proceedings / ISBN 0-9541183-1-6] Graz (Austria) 17-20 September 2003, pp. 665-674
summary	The ultimate goal of the described research is a process for mass customizing housing based on computer-aided design and production systems. The current goal is the development of an interactive system for generating solutions on the Web based on a modeling approach called discursive grammar. A discursive grammar consists of a programming grammar and a designing grammar. The programming grammar generates design briefs based on user data; the designing grammar provides the rules for generating designs in a particular style, and a set of heuristics guides the generation of designs towards a solution that matches the design brief. This paper describes the designing grammar using Siza´s houses at Malagueira as a case study.
keywords	Mass customization: housing; grammars; Siza; design automation
series	eCAADe
email
more	http://www.civil.ist.utl.pt/~jduarte/malag/
last changed	2022/06/07 07:55

_id	ecaade03_407_19_sterk
id	ecaade03_407_19_sterk
authors	d’Estrée Sterk, Tristan
year	2003
title	Building Upon Negroponte: A Hybridized Model of Control Suitable for Responsive Architecture
doi	https://doi.org/10.52842/conf.ecaade.2003.407
source	Digital Design [21th eCAADe Conference Proceedings / ISBN 0-9541183-1-6] Graz (Austria) 17-20 September 2003, pp. 407-414
summary	Responsive architecture is commonly defined as a type of architecture that has the ability to alter its form in response to changing conditions. While this description is successful in capturing the gist of the topic, it does not provide us with the more detailed understandings required to build it. The knowledge required to build a truly responsive form of architecture is substantial, an understanding of architecture, robotics, artificial intelligence and structural engineering are all beneficial. The links that are required between each knowledge base to actuate and control the responses of this type of architecture further complicate matters – suggesting potential reasons for the ambivalence of architects towards deeply exploring to the topic or extending it beyond the aesthetic application of an event-based architecture. This paper will build a model of responsive architecture that explains one possible approach to the topic, emphasizing ways to build it and control it in the process.
keywords	Controlling responsive architecture, Controlling networks of response buildings
series	eCAADe
type	normal paper
email
more	admin
last changed	2022/06/07 07:55

_id	ijac20031206
id	ijac20031206
authors	Glaser, Daniel; Peng, James
year	2003
title	On Classifying Daylight for Design
source	International Journal of Architectural Computing vol. 1 - no. 2
summary	In this paper, we present LiQuID, a tool for clustering lighting simulation data. Photographs are useful vehicles for both describing and making assessments of architectural lighting systems. A significant barrier to using photographs during the design process relates to the sheer volume of renderings that needs to be analyzed. Although there have been efforts to produce novel visualization systems to manage large sets of photographs, this research aims to reduce the complexity by classifying data into representative prototypes.A hypothetical case study is discussed.
series	journal
more	http://www.multi-science.co.uk/ijac.htm
last changed	2007/03/04 07:08

_id	sigradi2006_e028c
id	sigradi2006_e028c
authors	Griffith, Kenfield; Sass, Larry and Michaud, Dennis
year	2006
title	A strategy for complex-curved building design:Design structure with Bi-lateral contouring as integrally connected ribs
source	SIGraDi 2006 - [Proceedings of the 10th Iberoamerican Congress of Digital Graphics] Santiago de Chile - Chile 21-23 November 2006, pp. 465-469
summary	Shapes in designs created by architects such as Gehry Partners (Shelden, 2002), Foster and Partners, and Kohn Peterson and Fox rely on computational processes for rationalizing complex geometry for building construction. Rationalization is the reduction of a complete geometric shape into discrete components. Unfortunately, for many architects the rationalization is limited reducing solid models to surfaces or data on spread sheets for contractors to follow. Rationalized models produced by the firms listed above do not offer strategies for construction or digital fabrication. For the physical production of CAD description an alternative to the rationalized description is needed. This paper examines the coupling of digital rationalization and digital fabrication with physical mockups (Rich, 1989). Our aim is to explore complex relationships found in early and mid stage design phases when digital fabrication is used to produce design outcomes. Results of our investigation will aid architects and engineers in addressing the complications found in the translation of design models embedded with precision to constructible geometries. We present an algorithmically based approach to design rationalization that supports physical production as well as surface production of desktop models. Our approach is an alternative to conventional rapid prototyping that builds objects by assembly of laterally sliced contours from a solid model. We explored an improved product description for rapid manufacture as bilateral contouring for structure and panelling for strength (Kolarevic, 2003). Infrastructure typically found within aerospace, automotive, and shipbuilding industries, bilateral contouring is an organized matrix of horizontal and vertical interlocking ribs evenly distributed along a surface. These structures are monocoque and semi-monocoque assemblies composed of structural ribs and skinning attached by rivets and adhesives. Alternative, bi-lateral contouring discussed is an interlocking matrix of plywood strips having integral joinery for assembly. Unlike traditional methods of building representations through malleable materials for creating tangible objects (Friedman, 2002), this approach constructs with the implication for building life-size solutions. Three algorithms are presented as examples of rationalized design production with physical results. The first algorithm [Figure 1] deconstructs an initial 2D curved form into ribbed slices to be assembled through integral connections constructed as part of the rib solution. The second algorithm [Figure 2] deconstructs curved forms of greater complexity. The algorithm walks along the surface extracting surface information along horizontal and vertical axes saving surface information resulting in a ribbed structure of slight double curvature. The final algorithm [Figure 3] is expressed as plug-in software for Rhino that deconstructs a design to components for assembly as rib structures. The plug-in also translates geometries to a flatten position for 2D fabrication. The software demonstrates the full scope of the research exploration. Studies published by Dodgson argued that innovation technology (IvT) (Dodgson, Gann, Salter, 2004) helped in solving projects like the Guggenheim in Bilbao, the leaning Tower of Pisa in Italy, and the Millennium Bridge in London. Similarly, the method discussed in this paper will aid in solving physical production problems with complex building forms. References Bentley, P.J. (Ed.). Evolutionary Design by Computers. Morgan Kaufman Publishers Inc. San Francisco, CA, 1-73 Celani, G, (2004) “From simple to complex: using AutoCAD to build generative design systems” in: L. Caldas and J. Duarte (org.) Implementations issues in generative design systems. First Intl. Conference on Design Computing and Cognition, July 2004 Dodgson M, Gann D.M., Salter A, (2004), “Impact of Innovation Technology on Engineering Problem Solving: Lessons from High Profile Public Projects,” Industrial Dynamics, Innovation and Development, 2004 Dristas, (2004) “Design Operators.” Thesis. Massachusetts Institute of Technology, Cambridge, MA, 2004 Friedman, M, (2002), Gehry Talks: Architecture + Practice, Universe Publishing, New York, NY, 2002 Kolarevic, B, (2003), Architecture in the Digital Age: Design and Manufacturing, Spon Press, London, UK, 2003 Opas J, Bochnick H, Tuomi J, (1994), “Manufacturability Analysis as a Part of CAD/CAM Integration”, Intelligent Systems in Design and Manufacturing, 261-292 Rudolph S, Alber R, (2002), “An Evolutionary Approach to the Inverse Problem in Rule-Based Design Representations”, Artificial Intelligence in Design ’02, 329-350 Rich M, (1989), Digital Mockup, American Institute of Aeronautics and Astronautics, Reston, VA, 1989 Schön, D., The Reflective Practitioner: How Professional Think in Action. Basic Books. 1983 Shelden, D, (2003), “Digital Surface Representation and the Constructability of Gehry’s Architecture.” Diss. Massachusetts Institute of Technology, Cambridge, MA, 2003 Smithers T, Conkie A, Doheny J, Logan B, Millington K, (1989), “Design as Intelligent Behaviour: An AI in Design Thesis Programme”, Artificial Intelligence in Design, 293-334 Smithers T, (2002), “Synthesis in Designing”, Artificial Intelligence in Design ’02, 3-24 Stiny, G, (1977), “Ice-ray: a note on the generation of Chinese lattice designs” Environmental and Planning B, volume 4, pp. 89-98
keywords	Digital fabrication; bilateral contouring; integral connection; complex-curve
series	SIGRADI
email
last changed	2016/03/10 09:52

_id	avocaad_2003_18
id	avocaad_2003_18
authors	Henri Achten, Jos van Leeuwen and Sverker Fridqvist
year	2003
title	Communicating Concepts for Shared Understanding: A Multi-Agent Approach
source	LOCAL VALUES in a NETWORKED DESIGN WORLD - ADDED VALUE OF COMPUTER AIDED ARCHITECTURAL DESIGN, Stellingwerff, Martijn and Verbeke, Johan (Eds.), (2004) DUP Science - Delft University Press, ISBN 90-407-2507-1.
summary	Capturing and sharing design concepts is necessary if we want to support the design process by means of Information & Communication Technology (ICT). Standardized concepts are important for support at the end of the design process when designs need to conform to set standards and norms, and in order to enable communication, but are less useful in the early design stages. We propose an approach that takes into account a more developmental attitude that will be better suited for design support and the sharing of design concepts. In this approach, design concepts are formalised by means of a technology called concept modelling. Capturing and exchange of concepts are based on a multi-agent approach. The whole of concepts that are used in a domain or for a design task can be considered a design ontology. In this paper we outline the motivations for the research, outline the basic approach in the research work, and identify the major challenges and research problems that need to be tackled.
keywords	Architecture, Local values, Globalisation, Computer Aided Architectural Design
series	AVOCAAD
email
last changed	2006/01/16 21:38

_id	heylighenieee2003
id	HeylighenIEEE2003
authors	Heylighen, A., Neuckermans, H. and Morisse, P.
year	2003
title	What You See is What You Get
source	IEEE Multimedia, July-Sept 2003, Vol. 10, No. 3, pp. 48-56
summary	As the amount of visual information stored on electronic media grows, the need for appropriate access mechanisms becomes more critical. Information system developers in fields as varied as agriculture, medicine, and security must not only create systems to represent, store, and process visual content, but also re-examine the indexing procedure and conceive interfaces that make visual information easily accessible. Architectural design, a field overrun by myriad case libraries, manifests this challenge. Cases – specific designs from the past – are a significant source of knowledge in the architectural design field. Using current information technologies, researchers in this field have created a variety of multimedia case collections, storing them on CD-ROM, local networks, and the Internet. Several tools for accessing case collections exist; however most rely on verbal descriptions to index cases. For the collections to support architects during design, cases should not only be represented visually, but should also be accessible through a visual medium. We’ve developed a working prototype of a visual indexing and access mechanism that uses visual keys – small pictogram-like icons expressing an architectural feature. Users can consult an online case base using these keys or create new keys to label and link cases. A pilot study, in which student and professional architects used and evaluated the prototype, supports the need for such a mechanism.
series	journal paper
email
last changed	2004/03/25 17:55

_id	caadria2003_c5-1
id	caadria2003_c5-1
authors	Hoon, M. , Jabi, W. and Goldman, G.
year	2003
title	Immersion, Interaction, and Collaboration In Architectural Design Using Gaming Engines
doi	https://doi.org/10.52842/conf.caadria.2003.721
source	CAADRIA 2003 [Proceedings of the 8th International Conference on Computer Aided Architectural Design Research in Asia / ISBN 974-9584-13-9] Bangkok Thailand 18-20 October 2003, pp. 721-738
summary	"This paper investigates the role of gaming engines in the architectural design process through the introduction of features such as immersion, interaction and collaboration. While traditional 3D modelling and visualization systems such as 3D Studio MAX and form?Z offer increasingly convincing visual simulations, gaming engines are approaching the visual realism of such systems and are offering additional interactive features that are usually available only in more expensive immersive virtual reality systems . Additionally, the capability to have multiple individuals inhabit and navigate the space offers unique opportunities for collaboration as well as the investigation of human behaviour. Participants with internet access can be invited to access a shared virtual environment. Collaboration among users can be further enhanced by combining immersive navigation with peer-to-peer instant messaging and/or adding a voice channel. This paper analyzes these issues through research summary and the creation and user testing of a prototype based on a publicly available gaming engine. Through a series of assignments within an academic course, students in the school of architecture were asked to iteratively use and test this prototype for the collaborative exploration of designed environments. Students made their environments available for others to navigate in real-time and offer comments. A final design review was conducted in which critics were asked to enter the designed environment, explore it at will and interact with the student as well as others present in the same virtual space. This paper will illustrate some of the student projects and describe the immersive,"
series	CAADRIA
email
last changed	2022/06/07 07:50

_id	1404
id	1404
authors	Hosny, Samir Sadek
year	2003
title	BUIL-D-EX; A Knowledge-Based Expert System for the Diagnosis of Buildings Cracks
source	Scientific Bulletin, Faculty of Engineering, Ain Shams University, Vol. 38, No. 2, June 2003 - pp. 297-310
summary	Expert systems are computer systems developed to preserve the human expertise about specific domains in a well-structured form suitable for retrieval and manipulation by computers. They have been used in many fields of applications and proved to be beneficial. This paper addresses the role of Knowledge-based expert systems in building construction; particularly in the diagnostics and assessment of buildings' cracks. The paper presents BUIL-D-EX; a prototype for a Buildings’ Diagnostics Expert system intended to assist architects, structural engineers, contractors and even building owners in identifying and suggesting remedies to concrete and masonry surfaces' defects. The system identifies the kind of crack, states its most probable causes and its degree of danger, suggests a technical remedy and finally suggests several commercial names for materials to be used for curing the defect, and how to apply them. BUIL-D-EX offers complete explanations for all its questions to the users, as well as justifications for all its decisions and answers whenever needed.
keywords	Expert Systems, Diagnosis, Building Construction, Building Cracks, Backward chaining, Inference, Reasoning
series	journal paper
type	normal paper
email
last changed	2009/09/12 17:18

_id	caadria2003_b6-1
id	caadria2003_b6-1
authors	Howe, A.S., Kang, P. and Nasari, Omid
year	2003
title	Digiosk Digital Design to Robotic Deployment in Two Months
doi	https://doi.org/10.52842/conf.caadria.2003.811
source	CAADRIA 2003 [Proceedings of the 8th International Conference on Computer Aided Architectural Design Research in Asia / ISBN 974-9584-13-9] Bangkok Thailand 18-20 October 2003, pp. 811-826
summary	In this paper, we discuss Kit-of-parts Theory and how it applies to the design, manufacture, and operation of a small robotic deployable demonstration structure called the Digiosk (Howe, 2001). "Kit-of-parts Theory" refers to the study and application of objectoriented building techniques, where building components are predesigned / pre-engineered / pre-fabricated for inclusion in joint-based (linear element), panel-based (planar element), module-based (solid element), and deployable (time element) construction systems. The Digiosk is an exposition display kiosk that was designed and manufactured digitally, and brought from concept to robotic functionality in a short period of time. Using kinematic mechanisms the cylinder opens up and deploys into a 2.7m cubical display booth complete with integral power and network connections. The kiosk was designed using a solid modeler, from which data was extracted to drive digital manufacturing processes. Owing to the well-developed understanding of Kit-of-parts Theory and the new "kinematic architecture" principles, the paperless process yielded a working prototype only eight weeks after initial conceptualization. The paper concludes with a discussion of how these concepts can be applied to large-scale projects and design processes.
series	CAADRIA
email
last changed	2022/06/07 07:50

_id	caadria2003_a6-1
id	caadria2003_a6-1
authors	Hu, Catherine and Fox, Michael A.
year	2003
title	Starting From The Micro A Pedagogical Approach to Designing Responsive Architecture
doi	https://doi.org/10.52842/conf.caadria.2003.761
source	CAADRIA 2003 [Proceedings of the 8th International Conference on Computer Aided Architectural Design Research in Asia / ISBN 974-9584-13-9] Bangkok Thailand 18-20 October 2003, pp. 761-770
summary	The paper outlines a pedagogical approach whereby a number of technology-intensive skills can be quickly learned to a level of useful practicality through a series of discrete, yet cumulative explorations with the design goal of creating intelligently responsive architectural systems. The emerging area of responsive architecture serves as a practical means for inventing entirely new ways of developing spaces, and the designing and building environments that address dynamic, flexible and constantly changing needs. Responsive architecture is defined here as spaces and objects that can physically re-configure themselves to meet changing needs. The central issues explored are human and environmental interaction and behaviors, embedded computational infrastructures, kinetic and mechanical systems and physical control mechanisms. Being both multidisciplinary and technology-intensive in nature, architects need to be equipped with at least a base foundational knowledge in a number of domains in order to be able to develop the skills necessary to explore, conceive, and design such systems. The teaching methods were carried out with a group of undergraduate design students who had no previous experience in mechanical engineering, electronics, programming, or kinetic design with the goal of creating a responsive kinetic system that can demonstrate physical interactive behaviors on an applicable architectural scale. We found the approach to be extremely successful in terms of psychologically demystifying
series	CAADRIA
email
last changed	2022/06/07 07:50

For more results click below: