Cumincad : CUMINCAD Papers : Search Results

CumInCAD is a Cumulative Index about publications in Computer Aided Architectural Design
supported by the sibling associations ACADIA, CAADRIA, eCAADe, SIGraDi, ASCAAD and CAAD futures

PDF papers
References

Hits 1 to 20 of 604

Reformat results as: short short into frame detailed detailed into frame

_id	caadria2003_c3-4
id	caadria2003_c3-4
authors	Maneesatid, Preecha and Szalapaj, Peter
year	2003
title	The Role of CAD in Environmental Building Science
source	CAADRIA 2003 [Proceedings of the 8th International Conference on Computer Aided Architectural Design Research in Asia / ISBN 974-9584-13-9] Bangkok Thailand 18-20 October 2003, pp. 487-502
doi	https://doi.org/10.52842/conf.caadria.2003.487
summary	The fundamental requirement of all building design is the provision of shelter from the external climate and, if possible, the modification of environmental factors generated by this climate to create an internal environment suitable for human comfort. The environmental design strategies of modifying climate derive from the requirements of creating human comfort in buildings, using the elements of the natural climate which vary throughout the year depending upon the prevailing climatic conditions. Environmental Building Science (EBS) research and practice has investigated various techniques to increase architects' performance in environmental building design. These technical design options are also available to architects to take advantage of the external environment. Most environmental design techniques rely on convectional forms of passive environmental design, and building material and system. But it hardly begins to address the more complex demands of environmental building design issues in the buildings. Particularly, testing environmental design techniques against physical models requires much input data which is not available in the early design stages, and is time consuming to use. This forces architects to work with many design parameters that are not compatible with their activities. It is consequently difficult to observe the interrelation of design techniques with design development. The most important role of Computer Aided Design (CAD) is to integrate wider varieties of input data requirements, modelling with EBS properties, output representations with EBS knowledge and assistance tools for optimisation tasks in environmental design issues.
series	CAADRIA
email
last changed	2022/06/07 07:59

_id	avocaad_2003_06
id	avocaad_2003_06
authors	Arturo F. Montagu and Juan Pablo Cieri
year	2003
title	Urbamedia - Development of an urban database of fragments of some Argentinian and Latin-American cities using digital technology
source	LOCAL VALUES in a NETWORKED DESIGN WORLD - ADDED VALUE OF COMPUTER AIDED ARCHITECTURAL DESIGN, Stellingwerff, Martijn and Verbeke, Johan (Eds.), (2004) DUP Science - Delft University Press, ISBN 90-407-2507-1.
summary	The proposal of "Urbamedia" is to undertake the development of 3D virtual and interactive models of historical areas of Latin-American cities. The selected zone is the "Mayo Avenue" including the "Mayo Square", an historical place of the city of Buenos Aires, Argentina; this project is financed by the National Agency of Scientific and Technological Development of Argentina and the University of Buenos Aires.We are presenting the first experimental model of the "Mayo Square" that has been developed at ABACUS, Department of Architecture & Building Aids Computer Unit, University of Strathclyde UK. combined with a system analysis of urban activities using the “Atlas.ti” CAQDAS software.This particular use of the “Atlas.ti” software is under experimental applications to this type of urban analysis procedures; allowed us the possibility to analysed a set of activities by means of graph theory as result of a series of interviews to the people working in the area. We are also looking to include historical areas of three cities: Mar del Plata, Rosario and Santa Fe (Argentina) and eventually other cities from Latin América as Rio de Janeiro and Habana.Due that ABACUS has a strong experience in city modelling plus the powerful software and hardware used there, we must develop a VRML customized menu to be adapted to our low cost PC equipment. The 3D model will be used mainly in urban design simulation procedures and the idea is to extend to other type of simulations of the environmental parameters.
keywords	Architecture, Local values, Globalisation, Computer Aided Architectural Design
series	AVOCAAD
email
last changed	2006/01/16 21:38

_id	sigradi2006_e028c
id	sigradi2006_e028c
authors	Griffith, Kenfield; Sass, Larry and Michaud, Dennis
year	2006
title	A strategy for complex-curved building design:Design structure with Bi-lateral contouring as integrally connected ribs
source	SIGraDi 2006 - [Proceedings of the 10th Iberoamerican Congress of Digital Graphics] Santiago de Chile - Chile 21-23 November 2006, pp. 465-469
summary	Shapes in designs created by architects such as Gehry Partners (Shelden, 2002), Foster and Partners, and Kohn Peterson and Fox rely on computational processes for rationalizing complex geometry for building construction. Rationalization is the reduction of a complete geometric shape into discrete components. Unfortunately, for many architects the rationalization is limited reducing solid models to surfaces or data on spread sheets for contractors to follow. Rationalized models produced by the firms listed above do not offer strategies for construction or digital fabrication. For the physical production of CAD description an alternative to the rationalized description is needed. This paper examines the coupling of digital rationalization and digital fabrication with physical mockups (Rich, 1989). Our aim is to explore complex relationships found in early and mid stage design phases when digital fabrication is used to produce design outcomes. Results of our investigation will aid architects and engineers in addressing the complications found in the translation of design models embedded with precision to constructible geometries. We present an algorithmically based approach to design rationalization that supports physical production as well as surface production of desktop models. Our approach is an alternative to conventional rapid prototyping that builds objects by assembly of laterally sliced contours from a solid model. We explored an improved product description for rapid manufacture as bilateral contouring for structure and panelling for strength (Kolarevic, 2003). Infrastructure typically found within aerospace, automotive, and shipbuilding industries, bilateral contouring is an organized matrix of horizontal and vertical interlocking ribs evenly distributed along a surface. These structures are monocoque and semi-monocoque assemblies composed of structural ribs and skinning attached by rivets and adhesives. Alternative, bi-lateral contouring discussed is an interlocking matrix of plywood strips having integral joinery for assembly. Unlike traditional methods of building representations through malleable materials for creating tangible objects (Friedman, 2002), this approach constructs with the implication for building life-size solutions. Three algorithms are presented as examples of rationalized design production with physical results. The first algorithm [Figure 1] deconstructs an initial 2D curved form into ribbed slices to be assembled through integral connections constructed as part of the rib solution. The second algorithm [Figure 2] deconstructs curved forms of greater complexity. The algorithm walks along the surface extracting surface information along horizontal and vertical axes saving surface information resulting in a ribbed structure of slight double curvature. The final algorithm [Figure 3] is expressed as plug-in software for Rhino that deconstructs a design to components for assembly as rib structures. The plug-in also translates geometries to a flatten position for 2D fabrication. The software demonstrates the full scope of the research exploration. Studies published by Dodgson argued that innovation technology (IvT) (Dodgson, Gann, Salter, 2004) helped in solving projects like the Guggenheim in Bilbao, the leaning Tower of Pisa in Italy, and the Millennium Bridge in London. Similarly, the method discussed in this paper will aid in solving physical production problems with complex building forms. References Bentley, P.J. (Ed.). Evolutionary Design by Computers. Morgan Kaufman Publishers Inc. San Francisco, CA, 1-73 Celani, G, (2004) “From simple to complex: using AutoCAD to build generative design systems” in: L. Caldas and J. Duarte (org.) Implementations issues in generative design systems. First Intl. Conference on Design Computing and Cognition, July 2004 Dodgson M, Gann D.M., Salter A, (2004), “Impact of Innovation Technology on Engineering Problem Solving: Lessons from High Profile Public Projects,” Industrial Dynamics, Innovation and Development, 2004 Dristas, (2004) “Design Operators.” Thesis. Massachusetts Institute of Technology, Cambridge, MA, 2004 Friedman, M, (2002), Gehry Talks: Architecture + Practice, Universe Publishing, New York, NY, 2002 Kolarevic, B, (2003), Architecture in the Digital Age: Design and Manufacturing, Spon Press, London, UK, 2003 Opas J, Bochnick H, Tuomi J, (1994), “Manufacturability Analysis as a Part of CAD/CAM Integration”, Intelligent Systems in Design and Manufacturing, 261-292 Rudolph S, Alber R, (2002), “An Evolutionary Approach to the Inverse Problem in Rule-Based Design Representations”, Artificial Intelligence in Design ’02, 329-350 Rich M, (1989), Digital Mockup, American Institute of Aeronautics and Astronautics, Reston, VA, 1989 Schön, D., The Reflective Practitioner: How Professional Think in Action. Basic Books. 1983 Shelden, D, (2003), “Digital Surface Representation and the Constructability of Gehry’s Architecture.” Diss. Massachusetts Institute of Technology, Cambridge, MA, 2003 Smithers T, Conkie A, Doheny J, Logan B, Millington K, (1989), “Design as Intelligent Behaviour: An AI in Design Thesis Programme”, Artificial Intelligence in Design, 293-334 Smithers T, (2002), “Synthesis in Designing”, Artificial Intelligence in Design ’02, 3-24 Stiny, G, (1977), “Ice-ray: a note on the generation of Chinese lattice designs” Environmental and Planning B, volume 4, pp. 89-98
keywords	Digital fabrication; bilateral contouring; integral connection; complex-curve
series	SIGRADI
email
last changed	2016/03/10 09:52

_id	autcons0926580503000529
id	autconS0926580503000529
authors	Maver, T.; Petric, J.
year	2003
title	Sustainability: real and/or virtual?
source	Automation in Construction, 12(6), November 2003, pp. 641–648
summary	The starting point for this paper is the identification of the four necessary and sufficient conditions which a building should exhibit to be judged to be sustainable; fitness-for-purpose, cost effectiveness, environmental friendliness, and cultural significance. The contribution which the current generation of CAD tools is making to the complex human activity of designing sustainable buildings is then discussed under the headings of widening the search for solutions, integrating the decision-making process, improving design insights, differentiating objective/subjective issues and photorealistic visualization. The paper then describes developments in the next generation of IT tools, based on virtual reality, which will allow multiple designers, working in distributed locations and on different computer platforms, to design from within the virtual world.
keywords	Sustainability; Virtual reality; Computer-aided design; Virtual environments
series	journal paper
type	normal paper
email
last changed	2013/09/20 19:05

_id	avocaad_2003_04
id	avocaad_2003_04
authors	Rob van Helvoort
year	2003
title	Mecano - when CAAD meets ICT
source	LOCAL VALUES in a NETWORKED DESIGN WORLD - ADDED VALUE OF COMPUTER AIDED ARCHITECTURAL DESIGN, Stellingwerff, Martijn and Verbeke, Johan (Eds.), (2004) DUP Science - Delft University Press, ISBN 90-407-2507-1.
summary	For some years ICT (Information and Communication Technology) has been worldwide a hot topic and, especially in the European academic environment, a very fashionable word. No matter where the road would lead to, almost any ICT related project was welcomed as the next step towards a brand new and even better system of education. In the meantime CAAD (Computer Aided Architectural Design) plays a role of utmost importance during a range of stages in the design process or building project.In this situation a research project is set up to develop an educational environment where CAAD meets ICT. The first application was turned down as the proposed (ICT) technology wasn’t available, according to committee judging. After proving them wrong, the second application was more successful. Even though the project was set up for local values, education in CAAD and related topics in Belgium, it was situated in a networked (internet) world.After running the project for a period of two years a list of pros and cons can be made up. Moreover, both local and on a global scale, ideas have changed.
keywords	Architecture, Local values, Globalisation, Computer Aided Architectural Design
series	AVOCAAD
email
last changed	2006/01/16 21:38

_id	acadia03_037
id	acadia03_037
authors	Anders, Peter
year	2003
title	Cynergies: Technologies that Hybridize Physical and Cyberspaces
source	Connecting >> Crossroads of Digital Discourse [Proceedings of the 2003 Annual Conference of the Association for Computer Aided Design In Architecture / ISBN 1-880250-12-8] Indianapolis (Indiana) 24-27 October 2003, pp. 289-297
doi	https://doi.org/10.52842/conf.acadia.2003.289
summary	This paper presents ways in which cybrids depend for their technology upon three existing models of architectural hybrid: display space, environmental computing, and augmented/mixed reality. Cybrids bring these techniques together into a synergistic whole that depends as much on the observer for its consistency as it does on its comprising technologies. This synergy is a product of corroborative behavior between different modes, which provide cybrid users with a coherent social/spatial experience. The paper notes cybrids’ similarity to theater, not only for their technological dependency, but also for the tacit yet vital role of the observer in their effect.
series	ACADIA
email
last changed	2022/06/07 07:54

_id	avocaad_2003_17
id	avocaad_2003_17
authors	Anna Maria Chrabin, Jaroslaw Szewczyk and Herman Neuckermans
year	2003
title	A Critical Evaluation of Early Stages Software in its Capacity of Coping with Contextual Issues
source	LOCAL VALUES in a NETWORKED DESIGN WORLD - ADDED VALUE OF COMPUTER AIDED ARCHITECTURAL DESIGN, Stellingwerff, Martijn and Verbeke, Johan (Eds.), (2004) DUP Science - Delft University Press, ISBN 90-407-2507-1.
summary	In this paper we analyse critically early design stages software in its capacity of coping with contextual data at large (i.e. representing cultural, aesthetical context, etc.). We identified 5 categories of early stages software: geometry based graphic editors, evaluation architectural software, generative and shape-grammar based systems, evolutionary systems and other systems. Calling the object under creation during of the early stages a CAD conceptual model, we will investigate to what extend this software allows the architect to experience and represent the context in which a design is situated. Especially we will focus on its capacity to allow interaction, playful interaction on our way to the design. Designers, and particularly architects, interact with the local context similarly to interacting in a game: the context influences the users’ decisions, surprises them and causes permanent changes to their ways of thinking. On the other hand, architects permanently shape and reshape the context, and reduce the context to a protean point of reference. Such behaviour characterises creative thinking that is crucial for the early stage of design. The investigation led us to the conclusions that the effective interactivity with the context needs simple rules, a plain interface and data reduced as simple as possible, especially when interaction with the context is performed during the early stages of a design process. The findings can be used in organising computer environments for early-stage design.
keywords	Architecture, Local values, Globalisation, Computer Aided Architectural Design
series	AVOCAAD
email
last changed	2006/01/16 21:38

_id	sigradi2003_002
id	sigradi2003_002
authors	Argumedo, Cristina and Paganini, Ana
year	2003
title	Diseño Digital. Estudio Exploratorio de caso (Digital Design. Exploratory study of a case)
source	SIGraDi 2003 - [Proceedings of the 7th Iberoamerican Congress of Digital Graphics] Rosario Argentina 5-7 november 2003
summary	After the passage of the mechanical era to the digital era, the design must respond with increasing complexity of the technique, together with the plurality of expectations. Design education is sustained in conceptual instrumentation; it implies to recognize problematics that surpass the possibilities of an isolated or self-sufficient discipline; transdiscipline becomes essential for the understanding of the subjects.The porpuse is to generate new instruments for perception of space, combined with new visualization technologies. Anyway we must speak of all the design areas. The use of computer science has a specificity applications that are proper to each area. New technologies and the role of the new graphs in the design process, generate a new aesthetic.
series	SIGRADI
last changed	2016/03/10 09:47

_id	ijac20031107
id	ijac20031107
authors	Berridge, Philip; Koch, Volker; Brown, Andre G.P.
year	2003
title	Information Spaces for Mobile City Access
source	International Journal of Architectural Computing vol. 1 - no. 1
summary	This paper describes two complementary European research projects that share common interests and goals.The work described is intended to facilitate city analysis and support decision-making. The first project focuses on the distribution, access and ease of use of city data. The system allows access to historical data concerning key buildings in Liverpool, England, via a suite of web-based tools and a palmtop device. The second project looks at extending the functionality of traditional computer aided design (CAD) software to enable geometric and semantic data to be combined within a single environment. The system allows those involved in city planning to better understand the past and present development pattern of an area so that their decisions on future proposals are better informed.The paper concludes by describing a system that integrates particular aspects of the two projects, and the potential that this integration can bring.This new work provides mobile access to historical city development data, current city information and tools to support urban project development.
series	journal
more	http://www.multi-science.co.uk/ijac.htm
last changed	2007/03/04 07:08

_id	cf2011_p157
id	cf2011_p157
authors	Boton, Conrad; Kubicki Sylvain, Halin Gilles
year	2011
title	Understanding Pre-Construction Simulation Activities to Adapt Visualization in 4D CAD Collaborative Tools
source	Computer Aided Architectural Design Futures 2011 [Proceedings of the 14th International Conference on Computer Aided Architectural Design Futures / ISBN 9782874561429] Liege (Belgium) 4-8 July 2011, pp. 477-492.
summary	Increasing productivity and efficiency is an important issue in the AEC field. This area is mainly characterized by fragmentation, heterogeneous teams with low lifetimes and many uncertainties. 4D CAD is one of the greatest innovations in recent years. It consists in linking a 3D model of the building with the works planning in order to simulate the construction evolution over time. 4D CAD can fill several needs from design to project management through constructivity analysis and tasks planning (Tommelein 2003). The literature shows that several applications have been proposed to improve the 4D CAD use (Chau et al. 2004; Lu et al. 2007; Seok & al. 2009). In addition, studies have shown the real impact of 4D CAD use in construction projects (Staub-French & Khanzode 2007; Dawood & Sika 2007). More recently, Mahalingam et al. (2010) showed that the collaborative use of 4D CAD is particularly useful during the pre-construction phase for comparing the constructability of working methods, for visually identifying conflicts and clashes (overlaps), and as visual tool for practitioners to discuss and to plan project progress. So the advantage of the 4D CAD collaborative use is demonstrated. Moreover, several studies have been conducted both in the scientific community and in the industrial world to improve it (Zhou et al. 2009; Kang et al. 2007). But an important need that remains in collaborative 4D CAD use in construction projects is about the adaptation of visualization to the users business needs. Indeed, construction projects have very specific characteristics (fragmentation, variable team, different roles from one project to another). Moreover, in the AEC field several visualization techniques can represent the same concept and actors choose one or another of these techniques according to their specific needs related to the task they have to perform. For example, the tasks planning may be represented by a Gantt chart or by a PERT network and the building elements can be depicted with a 3D model or a 2D plan. The classical view (3D + Gantt) proposed to all practitioners in the available 4D tools seems therefore not suiting the needs of all. So, our research is based on the hypothesis that adapting the visualization to individual business needs could significantly improve the collaboration. This work relies on previous ones and aim to develop a method 1) to choose the best suited views for performed tasks and 2) to compose adapted multiple views for each actor, that we call ‚Äúbusiness views‚Äù. We propose a 4 steps-method to compose business views. The first step identifies the users‚Äô business needs, defining the individual practices performed by each actor, identifying his business tasks and his information needs. The second step identifies the visualization needs related to the identified business needs. For this purpose, the user‚Äôs interactions and visualization tasks are described. This enables choosing the most appropriate visualization techniques for each need (step 3). At this step, it is important to describe the visualization techniques and to be able to compare them. Therefore, we proposed a business view metamodel. The final step (step 4) selects the adapted views, defines the coordination mechanisms and the interaction principles in order to compose coordinated visualizations. A final step consists in a validation work to ensure that the composed views really match to the described business needs. This paper presents the latest version of the method and especially presents our latest works about its first and second steps. These include making more generic the business tasks description in order to be applicable within most of construction projects and enabling to make correspondence with visualization tasks.
keywords	Pre-construction, Simulation, 4D CAD, Collaboration, Computer Supported Cooperative Work, Human-Computer Interface, Information visualization, Business view, Model driven engineering
series	CAAD Futures
email
last changed	2012/02/11 19:21

_id	eaea2003_11-bremer-sander
id	eaea2003_11-bremer-sander
authors	Bremer, S. and Sander, H.
year	2004
title	View from the Road: Environmental Simulation for the Fractal City of Rhine Ruhr
source	Spatial Simulation and Evaluation - New Tools in Architectural and Urban Design [Proceedings of the 6th European Architectural Endoscopy Association Conference / ISBN 80-227-2088-7], pp. 43-47
summary	Highway seems to be more an issue of traffic planning than of urban design. But the highway can be a very important factor for the modern city pattern. Highways shape the spatial form of the fractal city. The modern highway can define new cores outside and “interior edges” within the city. Seen as a planning tool, highways are the great neglected opportunity in city and regional design. The 1st Architecture Biennial, 1ab, taking place from May 2003 to July 2003 in Rotterdam, explores the creative potentials of modern highways worldwide. An international research team discovered the spatial functions of highways in modern agglomerations. This lecture will give an overview of the results of the worldwide analyses and the design projects that had been undertaken. Both authors are members of the German research team. The German team examined the A 42 running through the Ruhrgebiet, a former coal and steal area in western Germany. The Ruhr Area is converting from an industrially orientated region to an agglomeration of high technology and science. But the regional image remains the same due to the fact that the changes cannot be seen, neither physically, nor from the road. Here, the highway could be used as a catalyst supporting and structuring the spatial changes to make them more legible for the people of Rhine-Ruhr. The nature becomes the most important tool of highway design. Landscape forms a linkage between the different cities of the region. Together with the A 40 and other local highways the region becomes the most important (and largest) public space of the new Rhine-Ruhr. The highway seen as a work of urban art can be designed only from the perspective of the driving car.
series	EAEA
more	http://info.tuwien.ac.at/eaea
last changed	2005/09/09 10:43

_id	ijac20031402
id	ijac20031402
authors	Caldas, Luisa G.; Norford, Leslie K.
year	2003
title	Shape Generation Using Pareto Genetic Algorithms: Integrating Conflicting Design Objectives in Low-Energy Architecture
source	International Journal of Architectural Computing vol. 1 - no. 4
summary	The Generative Design System [GDS] presented in this paper was developed to assist designers in researching low-energy architecture solutions. The GDS has the capability to evolve architectural forms that are energy-efficient, while complying to design intentions expressed by the architect and responding to conflicting objectives. To achieve this evolutionary development, the system integrates a search and optimization method [Genetic Algorithm], building energy simulation software [DOE2.1E], and Pareto multicriteria optimization techniques. The GDS adaptively generates populations of alternative solutions, from an initial schematic layout and a set of rules and constraints designed by the architect to encode design intentions. The two conflicting objective functions considered in this paper are maximizing daylighting use and minimizing energy consumption for conditioning the building. The GDS generated an uniformly sampled, continuous Pareto front, from which six points were visualized in terms of the proposed architectural solutions.
series	journal
more	http://www.multi-science.co.uk/ijac.htm
last changed	2007/03/04 07:08

_id	caadria2003_b2-4
id	caadria2003_b2-4
authors	Cheng, Min Ming
year	2003
title	Intelligent Island, Intelligent Practice? The Effects of National IT Policies on the Architectural Profession in Singapore
source	CAADRIA 2003 [Proceedings of the 8th International Conference on Computer Aided Architectural Design Research in Asia / ISBN 974-9584-13-9] Bangkok Thailand 18-20 October 2003, pp. 263-278
doi	https://doi.org/10.52842/conf.caadria.2003.263
summary	Historically, the discipline of Architecture experiences time lags in its incorporation of novel philosophical ideas, technology, social ideas and so on, thanks to the inertia brought about by the building process of any built space. So, how has this concrete entrenched discipline taken on the business of Information Technology in this Information Age? In a 99% wired up 'Intelligent Island' with the national IT master plans created every 5-10 years, how has architectural practices adapted to these changes? What are the factors surrounding IT in architectural firms and how does this affect their adoption of IT. What role should architecture play in a 'Knowledge Economy'?
series	CAADRIA
email
last changed	2022/06/07 07:55

_id	caadria2003_b4-2
id	caadria2003_b4-2
authors	Choi, Jin Won and Park, Jae Wan
year	2003
title	Developing a Building Design Compiler that Frequently evaluates Building Design Performance within the Design Process
source	CAADRIA 2003 [Proceedings of the 8th International Conference on Computer Aided Architectural Design Research in Asia / ISBN 974-9584-13-9] Bangkok Thailand 18-20 October 2003, pp. 553-566
doi	https://doi.org/10.52842/conf.caadria.2003.553
summary	This paper demonstrates an experience in the development of a design performance evaluation system that can frequently evaluate building design performance within the design process in a real-time manner. The evaluation system, that we call "design compiler," is composed of several modules such as a front-end component-based CAD engine, a knowledge base, and a set of design agents. The notion of the design compiler is quite similar to a compiler for computer programming such as a C compiler. While a computer programmer compiles a set of programming codes to check compiling errors during the implementation of a software system, an architectural designer can 'compile' his/her intermediate design product to evaluate design errors during the design process. The compilation can be done immediately at any level or any time during the design process in a real-time manner. We expect that this compiling process will dramatically increase design feedbacks, and thus result in a better design product. Further research issues that have been identified at the end of the research include increasing the modeling capability, extending to multi-story building representation, developing various design agents, exploring better ways to request and manage design knowledge, and supporting design collaboration.
series	CAADRIA
email
last changed	2022/06/07 07:56

_id	caadria2006_597
id	caadria2006_597
authors	CHOR-KHENG LIM, CHING-SHUN TANG, WEI-YEN HSAO, JUNE-HAO HOU, YU-TUNG LIU
year	2006
title	NEW MEDIA IN DIGITAL DESIGN PROCESS: Towards a standardize procedure of CAD/CAM fabrication
source	CAADRIA 2006 [Proceedings of the 11th International Conference on Computer Aided Architectural Design Research in Asia] Kumamoto (Japan) March 30th - April 2nd 2006, 597-599
doi	https://doi.org/10.52842/conf.caadria.2006.x.r4i
summary	In 1990, due to the traditional architecture design and construction method difficult to build the complicated and non-geometry free-form Fish Structure in Barcelona, architect Frank Gehry started learn from the field of aerospace to utilize CAD/CAM technology in design and manufacture process. He created the free-form fish model in CAD system and exported the digital CAD model data to CAM machine (RP and CNC) to fabricate the design components, and finally assembled on the site. Gehry pioneered in the new digital design process in using CAD/CAM technology or so-called digital fabrication. It becomes an important issue recently as the CAD/CAM technology progressively act as the new digital design media in architectural design and construction process (Ryder et al., 2002; Kolarevic, 2003). Furthermore, in the field of architecture professional, some commercial computer systems had been developed on purpose of standardizes the digital design process in using CAD/CAM fabrication such as Gehry Technologies formed by Gehry Partners; SmartGeometry Group in Europe and Objectile proposed by Bernard Cache. Researchers in the research field like Mark Burry, Larry Sass, Branko Kolarevic, Schodek and others are enthusiastic about the exploration of the role of CAD/CAM fabrication as new design media in design process (Burry, 2002; Schodek et al., 2005; Lee, 2005).
series	CAADRIA
email
last changed	2022/06/07 07:50

_id	acadia03_039
id	acadia03_039
authors	Clayton, Mark J.
year	2003
title	Connecting Digital Tools
source	Connecting >> Crossroads of Digital Discourse [Proceedings of the 2003 Annual Conference of the Association for Computer Aided Design In Architecture / ISBN 1-880250-12-8] Indianapolis (Indiana) 24-27 October 2003, p. 299
doi	https://doi.org/10.52842/conf.acadia.2003.x.p0b
summary	A decade ago, Bill Mitchell wrote “Chroniclers of our era may one day write ‘What was computer-aided design?’ To them, it will just be design.” Because of the proliferation of digital tools for design, we are rapidly forgetting that there was ever design before computing. Ask an undergraduate student to describe the design process. There is a good chance that the student will mention using CAD and 3D modeling. Ask a contractor how to practice the profession of building.
series	ACADIA
email
last changed	2022/06/07 07:49

_id	cf2003_m_034
id	cf2003_m_034
authors	DING, L, LIEW, P.-S., MAHER, M.-L., GERO, J.S. and DROGEMULLER, R.
year	2003
title	Integrating CAD and 3D Virtual Worlds Using Agents and EDM
source	Digital Design - Research and Practice [Proceedings of the 10th International Conference on Computer Aided Architectural Design Futures / ISBN 1-4020-1210-1] Tainan (Taiwan) 13–15 October 2003, pp. 301-312
summary	This paper develops an overall architecture for integrating CAD and virtual worlds. The advantages of having access to the building model in a virtual world include the collaborative nature of the world. The EDM database as an object-oriented database is developed to establish a common object-oriented representation of building model, which can be accessed by both CAD systems and virtual worlds. The integration between CAD systems and an EDM database is implemented through the use of Industry Foundation Classes (IFCs) as an intermediate data model and the communication between the database and virtual worlds is developed through agents.
keywords	agents, IFC, virtual world
series	CAAD Futures
email
last changed	2003/09/22 12:21

_id	ecaade03_000
id	ecaade03_000
authors	Dokonal, Wolfgang and Hirschberg, Urs (Eds.)
year	2003
title	Digital Design
source	21th eCAADe Conference Proceedings [ISBN 0-9541183-1-6], Graz (Austria) 17-20 September 2003, 677 p.
doi	https://doi.org/10.52842/conf.ecaade.2003
summary	Digital Design is not only the title of the 21st eCAADe conference 2003 in Graz but also one of the main keywords in Architectural Education nowadays. Information Technology has managed to influence all fields of the “architectural process” and has developed straight from the calculation tools of the engineers over the CAD drafting boards of big architectural firms to every architectural professional and student. This process was incredibly quick in terms of the architectural chronology but very slow in terms of architectural education at universities (at least in Austria). Not very long ago it was sometimes forbidden to deliver CAD drawings for design projects at our faculty. In fact, the early experiments in using the computer in the design process quite often failed because of the restrictions of the available (and affordable) hard-and software. Today, even our first year students start some of their earliest design experiences quite naturally with the computer. However, there are still many questions to be answered and maybe some new questions to be asked in the relationship between architectural design and the computer. Architectural design is mainly a “game of imagination” and today computer tools start to enhance and support the architects visions after a longer period where they were often reduced by the limitations of the tools. Still, there are many different ways to design because every designer has a different approach towards architectural design and there is no such thing as “the perfect digital design tool” for everyone. We hope that this conference with all the different approaches documented in this book plays a major role in the discussion and development of all these aspects and brings us “one step further”.
series	eCAADe
email
more	http://www.ecaade.org
last changed	2022/06/07 07:49

_id	ijac20031303
id	ijac20031303
authors	Donath, Dirk; Richter, Katharina; Hansen, Stefan
year	2003
title	Internet based support for architectural planning processes
source	International Journal of Architectural Computing vol. 1 - no. 3
summary	As building projects become increasingly more complex, the number of project participants grows as does their spatial distribution. An effective decentralised work process and co-operation is of increasing importance. The global computer network, the internet, has great potential and recent times have seen the development of a variety of techniques in this field. The project described here is based upon this approach and also takes it a step further. A specific analysis of the topic and the subsequent identification of potential approaches formed the basis for an architectural application that brings the architect in contact with other project participants using the internet as a powerful yet simple and easy to use medium.
series	journal
email
more	http://www.multi-science.co.uk/ijac.htm
last changed	2007/03/04 07:08

_id	archidna_thesis
id	archidna_thesis
authors	Doo Young Kwon
year	2003
title	ARCHIDNA: A GENREATIVE SYSTEM FOR SHAPE CONFIGURATONS
source	University of Washington, Design Machine Group
summary	his thesis concerns a new generation process for shape configurations using a set of operations. The approach derives from analyzing a particular design style and programming them into a computer. It discusses how generative CAD software can be developed that embodies a style and how this software can serve in the architectural design process as a computational design tool. The thesis proposes a prototype software system, ArchiDNA, to demonstrate the use of operations to generate drawings in a specific design style. ArchiDNA employs a set of operations to produce design drawings of shape configuration in Peter Eisenman's style for the Biocentrum building plan in Frankfurt, Germany. The principles of form generation are defined as a set of operations. ArchiDNA generates 2D and 3D drawings similar to Eisenmans plan and model for the Biocentrum building. The extension system of ArchiDNA, called ArchiDNA++, supports designers in defining operations and generating shape configurations. Designers can enter and edit their own shapes for the generation process and also control the parameters and attributes for shape operations. Thus, designers can manage the generation process and explore using ArchiDNA++, to generate shape configurations that are consistent with their own drawing style.
series	thesis:MSc
type	normal paper
email
last changed	2004/06/02 19:40

For more results click below: