Cumincad : CUMINCAD Papers : Search Results

CumInCAD is a Cumulative Index about publications in Computer Aided Architectural Design
supported by the sibling associations ACADIA, CAADRIA, eCAADe, SIGraDi, ASCAAD and CAAD futures

PDF papers
References

Hits 1 to 20 of 605

Reformat results as: short short into frame detailed detailed into frame

_id	caadria2003_a2-3
id	caadria2003_a2-3
authors	Lin, Chien-Cheng
year	2003
title	Seeing Moving Seeing Model for Computer Media
source	CAADRIA 2003 [Proceedings of the 8th International Conference on Computer Aided Architectural Design Research in Asia / ISBN 974-9584-13-9] Bangkok Thailand 18-20 October 2003, pp. 199-208
doi	https://doi.org/10.52842/conf.caadria.2003.199
summary	This paper discusses several kinds of the cognitive seeing and moving actions for designers in traditional and computer media. Experiments are conducted for the protocol analysis, and a coding scheme of seeing and moving actions are applied in this research. The results of this study reveal the relationships between seeing, moving, and concept-getting actions in these two medias. Base on this study, we can figure out the characteristic of seeing and moving actions and make an improvement for design education and computer-aided-design systems.
series	CAADRIA
email
last changed	2022/06/07 07:59

_id	caadria2003_a3-3
id	caadria2003_a3-3
authors	Schnabel, Marc Aurel
year	2003
title	Creation and Translation Virtual 3D Architectural Environments
source	CAADRIA 2003 [Proceedings of the 8th International Conference on Computer Aided Architectural Design Research in Asia / ISBN 974-9584-13-9] Bangkok Thailand 18-20 October 2003, pp. 371-384
doi	https://doi.org/10.52842/conf.caadria.2003.371
summary	In this paper, we describe the research we undertake to investigate the perception and comprehension of spatial volumes within immersive, non-immersive virtual environments and physical models and their translation to a tangible representation. We set up two related design experiments to investigate the outcome of creation, interpretation and communication of architectural design. One, being the analysis of a cubic structure, based on three-dimensional (3D) interlocking volumes and spaces; and the other, being the design of a 3D-maze together with text -based communication. Collaboratively participants create, assess and analyse spatial relationships of volumes and spaces of a 3D maze structure or construct models of these spaces. The objective of our study is to identify how designers perceive space in Virtual Environments (VE) and communicate design ideas by using VE versa conventional methods of two-dimensional depictions such as paper and pen or 3D representations such as physical models. We investigate issues of quality, accuracy, understanding, communicating and rebuilding of designed or experienced architectural compositions.
series	CAADRIA
email
last changed	2022/06/07 07:57

_id	avocaad_2003_06
id	avocaad_2003_06
authors	Arturo F. Montagu and Juan Pablo Cieri
year	2003
title	Urbamedia - Development of an urban database of fragments of some Argentinian and Latin-American cities using digital technology
source	LOCAL VALUES in a NETWORKED DESIGN WORLD - ADDED VALUE OF COMPUTER AIDED ARCHITECTURAL DESIGN, Stellingwerff, Martijn and Verbeke, Johan (Eds.), (2004) DUP Science - Delft University Press, ISBN 90-407-2507-1.
summary	The proposal of "Urbamedia" is to undertake the development of 3D virtual and interactive models of historical areas of Latin-American cities. The selected zone is the "Mayo Avenue" including the "Mayo Square", an historical place of the city of Buenos Aires, Argentina; this project is financed by the National Agency of Scientific and Technological Development of Argentina and the University of Buenos Aires.We are presenting the first experimental model of the "Mayo Square" that has been developed at ABACUS, Department of Architecture & Building Aids Computer Unit, University of Strathclyde UK. combined with a system analysis of urban activities using the “Atlas.ti” CAQDAS software.This particular use of the “Atlas.ti” software is under experimental applications to this type of urban analysis procedures; allowed us the possibility to analysed a set of activities by means of graph theory as result of a series of interviews to the people working in the area. We are also looking to include historical areas of three cities: Mar del Plata, Rosario and Santa Fe (Argentina) and eventually other cities from Latin América as Rio de Janeiro and Habana.Due that ABACUS has a strong experience in city modelling plus the powerful software and hardware used there, we must develop a VRML customized menu to be adapted to our low cost PC equipment. The 3D model will be used mainly in urban design simulation procedures and the idea is to extend to other type of simulations of the environmental parameters.
keywords	Architecture, Local values, Globalisation, Computer Aided Architectural Design
series	AVOCAAD
email
last changed	2006/01/16 21:38

_id	acadia03_015
id	acadia03_015
authors	Bernhardt, Matthew and Blostein, Beth
year	2003
title	APPROPRIATE LEVELS OF ACCESS: AN EMPIRICAL STUDY ON THE AVAILABILITY OF COMPUTERS IN STUDIO
source	Connecting >> Crossroads of Digital Discourse [Proceedings of the 2003 Annual Conference of the Association for Computer Aided Design In Architecture / ISBN 1-880250-12-8] Indianapolis (Indiana) 24-27 October 2003, pp. 119-127
doi	https://doi.org/10.52842/conf.acadia.2003.119
summary	One of the most significant technological challenges facing architecture schools today is how to provide an appropriate level of access to computing resources. As the computer has become a significant tool in the study and practice of architecture, students need to have access to that tool in order to further their studies. But in facing this question of access, what is “appropriate”? Is there such a thing as too much access? Is 1:1 access—a computer for every student—the minimum level of access that schools and students should accept? Or is there a point beyond which more resources just means more waste; computers sitting idle and unused, or students using the computer for unproductive ends? These questions were the subject of an experimental series of studios in the spring of 2002, wherein three studios were given varying numbers of computers for a term. The use of these computers was then tracked, and compared with previous terms. In tandem, the quality of work produced by these three studios was compared. While additional experiments are most likely needed to draw firm conclusions, the results of this experiment seem to support defining “an appropriate level of access” at less than 1:1.
series	ACADIA
type	normal paper
email
last changed	2022/06/07 07:52

_id	ijac20031107
id	ijac20031107
authors	Berridge, Philip; Koch, Volker; Brown, Andre G.P.
year	2003
title	Information Spaces for Mobile City Access
source	International Journal of Architectural Computing vol. 1 - no. 1
summary	This paper describes two complementary European research projects that share common interests and goals.The work described is intended to facilitate city analysis and support decision-making. The first project focuses on the distribution, access and ease of use of city data. The system allows access to historical data concerning key buildings in Liverpool, England, via a suite of web-based tools and a palmtop device. The second project looks at extending the functionality of traditional computer aided design (CAD) software to enable geometric and semantic data to be combined within a single environment. The system allows those involved in city planning to better understand the past and present development pattern of an area so that their decisions on future proposals are better informed.The paper concludes by describing a system that integrates particular aspects of the two projects, and the potential that this integration can bring.This new work provides mobile access to historical city development data, current city information and tools to support urban project development.
series	journal
more	http://www.multi-science.co.uk/ijac.htm
last changed	2007/03/04 07:08

_id	cf2011_p157
id	cf2011_p157
authors	Boton, Conrad; Kubicki Sylvain, Halin Gilles
year	2011
title	Understanding Pre-Construction Simulation Activities to Adapt Visualization in 4D CAD Collaborative Tools
source	Computer Aided Architectural Design Futures 2011 [Proceedings of the 14th International Conference on Computer Aided Architectural Design Futures / ISBN 9782874561429] Liege (Belgium) 4-8 July 2011, pp. 477-492.
summary	Increasing productivity and efficiency is an important issue in the AEC field. This area is mainly characterized by fragmentation, heterogeneous teams with low lifetimes and many uncertainties. 4D CAD is one of the greatest innovations in recent years. It consists in linking a 3D model of the building with the works planning in order to simulate the construction evolution over time. 4D CAD can fill several needs from design to project management through constructivity analysis and tasks planning (Tommelein 2003). The literature shows that several applications have been proposed to improve the 4D CAD use (Chau et al. 2004; Lu et al. 2007; Seok & al. 2009). In addition, studies have shown the real impact of 4D CAD use in construction projects (Staub-French & Khanzode 2007; Dawood & Sika 2007). More recently, Mahalingam et al. (2010) showed that the collaborative use of 4D CAD is particularly useful during the pre-construction phase for comparing the constructability of working methods, for visually identifying conflicts and clashes (overlaps), and as visual tool for practitioners to discuss and to plan project progress. So the advantage of the 4D CAD collaborative use is demonstrated. Moreover, several studies have been conducted both in the scientific community and in the industrial world to improve it (Zhou et al. 2009; Kang et al. 2007). But an important need that remains in collaborative 4D CAD use in construction projects is about the adaptation of visualization to the users business needs. Indeed, construction projects have very specific characteristics (fragmentation, variable team, different roles from one project to another). Moreover, in the AEC field several visualization techniques can represent the same concept and actors choose one or another of these techniques according to their specific needs related to the task they have to perform. For example, the tasks planning may be represented by a Gantt chart or by a PERT network and the building elements can be depicted with a 3D model or a 2D plan. The classical view (3D + Gantt) proposed to all practitioners in the available 4D tools seems therefore not suiting the needs of all. So, our research is based on the hypothesis that adapting the visualization to individual business needs could significantly improve the collaboration. This work relies on previous ones and aim to develop a method 1) to choose the best suited views for performed tasks and 2) to compose adapted multiple views for each actor, that we call ‚Äúbusiness views‚Äù. We propose a 4 steps-method to compose business views. The first step identifies the users‚Äô business needs, defining the individual practices performed by each actor, identifying his business tasks and his information needs. The second step identifies the visualization needs related to the identified business needs. For this purpose, the user‚Äôs interactions and visualization tasks are described. This enables choosing the most appropriate visualization techniques for each need (step 3). At this step, it is important to describe the visualization techniques and to be able to compare them. Therefore, we proposed a business view metamodel. The final step (step 4) selects the adapted views, defines the coordination mechanisms and the interaction principles in order to compose coordinated visualizations. A final step consists in a validation work to ensure that the composed views really match to the described business needs. This paper presents the latest version of the method and especially presents our latest works about its first and second steps. These include making more generic the business tasks description in order to be applicable within most of construction projects and enabling to make correspondence with visualization tasks.
keywords	Pre-construction, Simulation, 4D CAD, Collaboration, Computer Supported Cooperative Work, Human-Computer Interface, Information visualization, Business view, Model driven engineering
series	CAAD Futures
email
last changed	2012/02/11 19:21

_id	caadria2003_b3-4
id	caadria2003_b3-4
authors	Bruton, Dean and Radford, Antony
year	2003
title	The Grammatical Studio Disrupting Regularities in Digital Media Design Education
source	CAADRIA 2003 [Proceedings of the 8th International Conference on Computer Aided Architectural Design Research in Asia / ISBN 974-9584-13-9] Bangkok Thailand 18-20 October 2003, pp. 433-446
doi	https://doi.org/10.52842/conf.caadria.2003.433
summary	Grammar governs the ordered way in which words are modified and combined in human languages to convey complex concepts beyond the simplicities of individual words. By extension (but less susceptible to analysis) grammar governs the way in which visual elements are modified and combined in art and design compositions. In this paper we focus on the outcomes and effects of placing grammar and contingency in the forefront of studio teaching with digital media in architecture and art, and how experience in these two domains can inform each other.
series	CAADRIA
email
last changed	2022/06/07 07:54

_id	caadria2003_b1-2
id	caadria2003_b1-2
authors	Chakraborty, Somen
year	2003
title	Automated Generation of Residential Roomlayout within a Constrained Covered Area
source	CAADRIA 2003 [Proceedings of the 8th International Conference on Computer Aided Architectural Design Research in Asia / ISBN 974-9584-13-9] Bangkok Thailand 18-20 October 2003, pp. 85-100
doi	https://doi.org/10.52842/conf.caadria.2003.085
summary	A significant quantum of all buildings constructed in modern times is designed for residential purpose. A tremendous amount of money is being spent every year for construction of residential buildings. Therefore, optimization of design becomes very important. In a country like India most people in urban area live in houses having constrained area. A significant part of residential units comes under mass housing either as high-rise building blocks or as plotted developments. In any of such schemes there are large number of housing units for a group of families of whom general characteristics are known but characteristics of individual families are not known at the time of designing. This situation is, however, suitable for scientific investigation and analysis based on statistical surveys. Broadly speaking, this paper suggests approach to deal with this situation of finding optimum layout of rooms of a housing unit for any target group of families when the covered area is so constrained that freedom of using different criteria like aesthetics, structural systems, materials and methods of construction in varieties of ways is drastically reduced. In such constrained area for housing units rooms are generally found rectangular within overall rectangular outline of each unit. Method shown here is valid under this restriction. It is also assumed that number of rooms will be restricted to such number that exhaustive search for design is practically possible within a reasonable time with present day capabilities of normally available PCs.
series	CAADRIA
email
last changed	2022/06/07 07:55

_id	caadria2003_a5-4
id	caadria2003_a5-4
authors	Chang, Yu-Li
year	2003
title	The Prototype of Digital Cities On Line A Cognition-Oriented Approach for Spatially Metaphorical Model
source	CAADRIA 2003 [Proceedings of the 8th International Conference on Computer Aided Architectural Design Research in Asia / ISBN 974-9584-13-9] Bangkok Thailand 18-20 October 2003, pp. 651-662
doi	https://doi.org/10.52842/conf.caadria.2003.651
summary	The cyberspace upon physical space forms a new spatial structure to increase the influence on the urban fabric and the concept of space in architecture. Today, digital cities are being developed all over the world. By using a city metaphor, digital cities integrate urban information and create public spaces. However, human how to entry into the new emerging digital cities, to percept themselves in around cities, and then taking shape the recognition of digital city forms? How do digital cities directly connect to physical cities and become an imaginable city? Therefore, we argue that a new spatial analysis theory must be established for digital city, comparing with theories of spatial cognition, to find the explicitly spatial structures and relations in digital city upon physical city. This paper studied by the viewpoint of cognition in order to propose a prototype of metaphor of digital city.
series	CAADRIA
email
last changed	2022/06/07 07:55

_id	caadria2003_b4-3
id	caadria2003_b4-3
authors	Chen, Hong-Sheng and Lin, Feng-Tyan
year	2003
title	Computer Aided Performance Analysis of Staircase Fault Tolerance
source	CAADRIA 2003 [Proceedings of the 8th International Conference on Computer Aided Architectural Design Research in Asia / ISBN 974-9584-13-9] Bangkok Thailand 18-20 October 2003, pp. 567-578
doi	https://doi.org/10.52842/conf.caadria.2003.567
summary	This study is to investigate the performance of staircases in a building with some faulty staircases. In this building, any unexpected hazard or repairs may cause vertical escaping routes inaccessible. Therefore, it is crucial that architects should assess this condition, and the users also need to be aware of this problem. Facing those staircase faults, architects need to consider space usage, staircases arrangement, and pedestrian attributes. This paper proposes a method to model the pedestrian's movement in the interior space of abovementioned building. We applied Monte Carlo simulation and AgentBased Modeling method in a CAAD environment. And we will apply two case studies to bring forward some important discoveries and support our arguments.
series	CAADRIA
email
last changed	2022/06/07 07:55

_id	cf_2003_000
id	cf_2003_000
authors	Chiu, M.-L., Tsou, J.-Y., Kvan, Th., Morozumi, M. and Jeng, T.-S. (Eds.)
year	2003
title	Digital Design - Research and Practice
source	Proceedings of the 10th International Conference on Computer Aided Architectural Design Futures / ISBN 1-4020-1210-1 / Tainan (Taiwan) 13–15 October 2003, 464 p.
summary	The use of computers in the design of the built environment has reached a watershed. From peripheral devices in the design process, they have in recent years come to take centre stage. An illustration is immediately at hand. Just as the entries to the competition for the Chicago Tribune Tower in 1922 defined the state-of-the-art at the beginning of the twentieth century, we have a similar marker at the end of the century, the competition in 2002 to replace the World Trade Centre towers in Lower Manhattan offered us a range of architectural solutions that exemplified the state-of-the-art eighty years later, setting forth not only architectural statements but also illustrating clearly the importance of computers in the design of the built environment. In these entries of 2002, we can see that computers have not only become essential to the communication of design but in the investigation and generation of structure, form and composition. The papers in this book are the current state-of-the-art in computer-aided design as it stands in 2003. It is the tenth in a series sponsored by the CAAD Futures Foundation, compiled from papers presented at the biennial CAAD Futures Conferences. As a series, the publications have charted the steady progress in developing the theoretical and practical foundations for applications in design practice. This volume continues in that tradition; thus, this book is entitled Digital Design: Research and Practice. The papers are grouped into three major categories, reflecting thrusts of research and practice, namely: Data and information: its organisation, handling and access, including agents; Virtual worlds: their creation, application and interfaces; and Analysis and creation of form and fabric. The editors received 121 abstracts after the initial call for contributions. From these, 61 abstracts were selected for development into complete papers for further review. From these submissions, 39 papers were chosen for inclusion in this publication. These papers show that the field has evolved from theoretical and development concerns to questions of practice in the decade during which this conference has showcased leading work. Questions of theoretical nature remain as the boundaries of our field expand. As design projects have grasped the potentials of computer-aided design, so have they challenged the capabilities of the tools. Papers here address questions in geometric representation and manipulation (Chiu and Chiu; Kocaturk, Veltkamp and Tuncer), topics that may have been considered to be solved. As design practice becomes increasingly knowledge based, better ways of managing, manipulating and accessing the complex wealth of design information becomes more pressing, demanding continuing research in issues such as modelling (Yang; Wang; Zreik et al), data retrieval and querying (Hwang and Choi; Stouffs and Cumming; Zreik, Stouffs, Tuncer, Ozsariyildiz and Beheshti), new modes of perceiving data (Segers; Tan). Tools are needed to manage, mine and create information for creative work, such as agents (Liew and Gero; Smith; Caneparo and Robiglio; Ding et al) or to support design processes (Smith; Chase). Systems for the support and development of designs continue (Gero; Achten and Jessurun). As progress is made on some fronts, such as user interfaces, attention is again turned to previously research areas such as lighting (Jung, Gross and Do; Ng et al; Wittkopf; Chevier; Glaser, Do and Tai) or services (Garcia; Chen and Lin). In recent years the growth of connectivity has led to a rapid growth in collaborative experience and understanding of the opportunities and issues continues to mature (Jabi; Dave; Zamenopoulos and Alexiou). Increasing interest is given to implications in practice and education (Dave; Oxman; Caneparo, Grassi and Giretti). Topics new to this conference are in the area of design to production or manufacture (Fischer, Burry and Frazer; Shih). Three additional invited papers (Rekimoto; Liu; Kalay) provide clear indication that there is still room to develop new spatial concepts and computer augmented environments for design. In conclusion, we note that these papers represent a good record of the current state of the evolving research in the field of digital design.
series	CAAD Futures
email
more	http://www.caadfutures.arch.tue.nl/
last changed	2003/09/22 12:21

_id	cf2003_m_033
id	cf2003_m_033
authors	DAVE, Bharat
year	2003
title	Hybrid Spaces of Practice
source	Digital Design - Research and Practice [Proceedings of the 10th International Conference on Computer Aided Architectural Design Futures / ISBN 1-4020-1210-1] Tainan (Taiwan) 13–15 October 2003, pp. 181-190
summary	Research projects in computational design typically view digital tools as existing independently of their physical settings. However, what we witness are hybrid spaces of practice, one in which there is an increasing fusion and overlap of physical and digital objects and environments. Instead of focusing on digital tools and information in isolation, this paper argues for the need to conceptualise and experiment with hybrid work environments through combinations of place, time, scale, resolution and other dimensions to develop hybrid spaces of practice. The paper describes experiments with a work environment that consists of multiple displays and representations to motivate and characterise hybrid spaces of physical and digital work environments.
keywords	collaboration, ephemeral, tangible, virtual environment
series	CAAD Futures
email
last changed	2003/09/22 12:21

_id	ijac20031204
id	ijac20031204
authors	de Vries, Bauke; Achten, Henri; Orzechowski, Maciej; Tan, Amy; Segers, Nicole; Tabak, Vincent; Jessurun, Joran; Coomans, Marc
year	2003
title	The Tangible Interface: Experiments as an Integral Part of a Research Strategy
source	International Journal of Architectural Computing vol. 1 - no. 2
summary	The Human-Computer interface is crucial to good design support tools. It has to be non-interruptive and non-distracting, yet allow the architect to interact with the computer software. The physical reality of the interface, such as the shape and manipulability of devices like the mouse, keyboard, joystick, or data-glove, has to be mapped on actions and commands in the software. Already the current user interfaces are felt to be inadequate for a good support of design, and the functionality of design tools is growing, requiring even more and new physical interface devices. In this paper, we present research on new tangible interfaces for architectural design support. In particular, we focus on the research methodological question how to investigate such devices.The research strategy is introduced and discussed, after which concrete implementations of this strategy are shown. Based on this work, we conclude that the combination of interface and the context of its use in terms of design method and user needs form crucial aspects for such research and cannot be considered separately.
series	journal
email
more	http://www.multi-science.co.uk/ijac.htm
last changed	2007/03/04 07:08

_id	ecaade03_000
id	ecaade03_000
authors	Dokonal, Wolfgang and Hirschberg, Urs (Eds.)
year	2003
title	Digital Design
source	21th eCAADe Conference Proceedings [ISBN 0-9541183-1-6], Graz (Austria) 17-20 September 2003, 677 p.
doi	https://doi.org/10.52842/conf.ecaade.2003
summary	Digital Design is not only the title of the 21st eCAADe conference 2003 in Graz but also one of the main keywords in Architectural Education nowadays. Information Technology has managed to influence all fields of the “architectural process” and has developed straight from the calculation tools of the engineers over the CAD drafting boards of big architectural firms to every architectural professional and student. This process was incredibly quick in terms of the architectural chronology but very slow in terms of architectural education at universities (at least in Austria). Not very long ago it was sometimes forbidden to deliver CAD drawings for design projects at our faculty. In fact, the early experiments in using the computer in the design process quite often failed because of the restrictions of the available (and affordable) hard-and software. Today, even our first year students start some of their earliest design experiences quite naturally with the computer. However, there are still many questions to be answered and maybe some new questions to be asked in the relationship between architectural design and the computer. Architectural design is mainly a “game of imagination” and today computer tools start to enhance and support the architects visions after a longer period where they were often reduced by the limitations of the tools. Still, there are many different ways to design because every designer has a different approach towards architectural design and there is no such thing as “the perfect digital design tool” for everyone. We hope that this conference with all the different approaches documented in this book plays a major role in the discussion and development of all these aspects and brings us “one step further”.
series	eCAADe
email
more	http://www.ecaade.org
last changed	2022/06/07 07:49

_id	ecaade03_567_96_newton
id	ecaade03_567_96_newton
authors	D’souza, Newton and Talbott, Newton
year	2003
title	The (Non) Relation between Efficiency and Choice of Computer tools in Design Modeling: An Automated Protocol Analysis
source	Digital Design [21th eCAADe Conference Proceedings / ISBN 0-9541183-1-6] Graz (Austria) 17-20 September 2003, pp. 567-574
doi	https://doi.org/10.52842/conf.ecaade.2003.567
summary	There exists a fundamental belief among mainstream CAAD software developers that a designer’s thought process is mainly driven towards achieving optimum efficiency. This paper argues that designers are not as much concerned with efficiency as much as protecting their personal preference for a certain method of object construction. Identifying and providing support to these methods - referred to here as ‘methods-ofmaking,’ is hence considered vital to how design efficiency is defined and how future CAAD tools are created. This hypothesis is empirically supported through a study conducted among 30 design students at the School of Architecture and Urban Planning, University of Wisconsin–Milwaukee.
keywords	Computer tools, efficiency, design modeling, methods-of-making, preference
series	eCAADe
email
more	http://www.uwm.edu/~nsdsouza
last changed	2022/06/07 07:55

_id	caadria2003_a6-2
id	caadria2003_a6-2
authors	Embi, M. Hamid, M. and Rafi, A.
year	2003
title	Learning Basic Principles of Fire Regulations An Experimental Teaching and Learning Tool
source	CAADRIA 2003 [Proceedings of the 8th International Conference on Computer Aided Architectural Design Research in Asia / ISBN 974-9584-13-9] Bangkok Thailand 18-20 October 2003, pp. 771-786
doi	https://doi.org/10.52842/conf.caadria.2003.771
summary	The study on integrating fire regulations into the design process is described through several study and analysis. However not all of them address the real issue of which fire regulation are difficult to be considered at the early stage of the design process. There are few factors on which fire regulation was not being considered at the early stage of the design. Two strong factors are the complexity of the regulations and the lack of knowledge among architects about fire regulations. Therefore fire requirements are always considered towards the end of the design process. This paper intends to address about the issue of difficulties in fire regulations and how we think these can be solve. We also design a system that can be used either by students or architects to understand the principles of the regulations and its applications in the design process. Finally a prototype system is demonstrated on how we envisage the system that can be used to help architects integrate fire regulations at the early stage of design process.
series	CAADRIA
email
last changed	2022/06/07 07:55

_id	a2de
id	a2de
authors	Gao, Song; Kvan, Thomas
year	2003
title	AN ANALYSIS OF PROBLEM FRAMING ACTIVITIES IN DIGITAL VERSUS PAPER MEDIA
source	Architectural Education, Southeast University, Nanjing, China, December 2003, pp. 183-189
summary	Architectural design is described in part as the solving of ill-defined or wicked problems. In these activities, designers are not only simply given well-stated problems but also need to find and formulate problems. This process is called as ‘problem framing’. Paper media have been for many years the design tools used by designers to help them engage, and hence frame, problems. Computer technologies have gained prominence in design processes but have typically been used in discrete problem solving processes or in presentation. It has been stated that problem exploration is more difficult using a computer tool. This attitude has influenced the teaching and use of computers in architectural education. The purpose of this study is to understand how digital and paper media are used respectively in ‘problem framing’ activities in support of students’ design learning. This paper reports a pilot laboratory study to test the validity of a proposed coding scheme comparing design activities using digital and paper media and report initial results of the research. Through this research we wish to gain insight of ways in which students engage in ‘problem framing’ activities using different media and suggest ways in which digital media might better support problem framing activities.
keywords	Problem framing; digital design; protocol analysis; studio teaching
series	other
type	normal paper
email
last changed	2004/09/24 14:34

_id	cf2003_m_060
id	cf2003_m_060
authors	GLASER, D., VOUNG, J., XIAO, L., TAI, B., UBBELOHDE M.S., CANNY, J. and DO, E. Y.-L.
year	2003
title	LightSketch - A Sketch-Modelling Program for Lighting Analysis
source	Digital Design - Research and Practice [Proceedings of the 10th International Conference on Computer Aided Architectural Design Futures / ISBN 1-4020-1210-1] Tainan (Taiwan) 13–15 October 2003, pp. 371-382
summary	This paper presents a flexible, yet powerful lighting analysis tool, LightSketch. LightSketch is a sketch-based modelling program for lighting analysis. It allows the user to draw both architectural and lighting related symbols which are converted into a 3D model for lighting visualisation. It is motivated by examining the strengths and limitations of current lighting design practices. Its use is illustrated with design scenarios.
keywords	sketch, lighting, simulation
series	CAAD Futures
email
last changed	2004/10/04 07:49

_id	diss_2003
id	diss_2003
authors	Gorczyca, Adam
year	2003
title	Interaction of the design methods and the contemporary computer techniques
source	Faculty of Architecture, Warsaw University of Technology
summary	The thesis researches a bilateral relations between computer techniques and methods of architectural design. It represents a holistic attitude because of a multithread analysis in the field of the theory of design, a new hard- and software used by architects, and a design practice. Thesis: Contemporary computer science development at the end of the twentieth century pushed architects to use hard- and software as tools, which became an active support (more than just CAAD). It enabled to widen the scope of a form-properties research and a generation of solutions impossible to achieve before, by using traditional methods and tools. This situation leads to new, unpredictable possibilities of architectural research and design. Objectives: 1. Definition of the latest trends in computer technologies applied in architectural offices. 2. Presentation of some practical consequencies of application of those technologies in design and construction. 3. Separation of new design methods caused by use of digital tools. 4. A simplified taxonomy of the methods above, with characteristic features. 5. A research in practical application of digital tools in Polish and foreign offices, as well as at the WUT Faculty of Architecture. The subject of the work: The thesis constitutes of five chapters. The first chapter is an introduction, where the range of work is presented in the context of place, time and the research made. The following chapters research three aspects of CAAD: (1) hardware and software, (2) new definition of architecture, which is a result of application of the digital tools, (3) practical problems connected with the use of computer techniques. The second chapter describes the new technologies in use –Virtual Reality (incl. VRD, CAVE’s, Data Gloves, motion-capture), Rapid prototyping (incl. holographic printers, 3D scanners, routers, milling-machines), new types of interfaces (e.g. xWorlds, InfoSpace, Flock of birds), etc. The third chapter is a theoretical one. It presents three types of changes in design methods, which can be classified, judging by results, in architecture of: (a) in-formation (b) de-formation and (c) cyberspace. All the mentioned applications of a digital technology cause redefinition of the range of the architects’ profession. The fourth chapter is concentrated on the application and utilization of technology. It is a detailed analysis of chosen buildings (characteristic examples) and design methods used by some avant-garde and well-known practitioners and visioners of architecture (Eisenman, Gehry, Spuybroek, etc.). It also presents statistics, where the influence of digital tools on the way of working (efficiency, productivity, use of tools) is expressed numerically. A synthesis summarizes the relation between architects and the new digital tools in some aspects: hard- and software, social changes, ergonomics, methodics, linguistic/symbolic and architectural. The mentioned ranges of interaction constitute the proof of the thesis.
series	thesis:PhD
email
last changed	2003/09/17 18:20

_id	ecaadesigradi2019_471
id	ecaadesigradi2019_471
authors	Güzelci, Orkan Zeynel, Alaçam, Sema and Güzelci, Handan
year	2019
title	Trend Topics and Changing Concepts of Computational Design in the Last 16 Years - A content analysis
source	Sousa, JP, Xavier, JP and Castro Henriques, G (eds.), Architecture in the Age of the 4th Industrial Revolution - Proceedings of the 37th eCAADe and 23rd SIGraDi Conference - Volume 1, University of Porto, Porto, Portugal, 11-13 September 2019, pp. 423-430
doi	https://doi.org/10.52842/conf.ecaade.2019.1.423
summary	This study argues that analysis of written content might be helpful to provide clues at a certain extent on the future directions of current research areas and the emergence of new study areas. In the scope of the study, the International Journal of Architectural Computing (IJAC) which has been a scientific platform covering many pioneer publications on education research in computer-aided architectural design (CAAD) field was selected as source content. Although the size of the source domain is limited, the analysis of abstracts and titles of 439 articles published in IJAC between 2003 and 2018 revealed promising results which can be examined under four characteristics: "constant", "emerging", "fading" and "solidifying" concepts. The tokens in the analysis process are words, phrases, topic nodes and links between topic nodes. The outcomes of this study might contribute to tracking the evolution of concepts their emergence or disusage in different time and contexts, and interrelations between different concepts.
keywords	content analysis; computational design concepts; IJAC
series	eCAADeSIGraDi
email
last changed	2022/06/07 07:49

For more results click below: