Cumincad : CUMINCAD Papers : Search Results

CumInCAD is a Cumulative Index about publications in Computer Aided Architectural Design
supported by the sibling associations ACADIA, CAADRIA, eCAADe, SIGraDi, ASCAAD and CAAD futures

PDF papers
References

Hits 1 to 20 of 226

Reformat results as: short short into frame detailed detailed into frame

_id	121a
authors	Karner, K., Klaus, A., Bauer, J. and Zach, Ch.
year	2003
title	MetropoGIS: A City Modeling System
source	CORP 2003, Vienna University of Technology, 25.2.-28.2.2003 [Proceedings on CD-Rom]
summary	We report on a new system to generate photo-realistic 3D models of real cities. So far, we focus on the accurate geometric andradiometric modeling of man-made structures. The modeling process starts with a 3D block model obtained from aerial images, aerial laser scans or GIS data. This block model is further augmented with geo-referenced terrestrial images of the facades. Theterrestrial images are either captured using a mobile multi-sensor-platform or an off-the-shelf digital camera. The relative orientationof terrestrial images is calculated automatically and fitted towards the 3D block model with minimized human input using vanishingpoints. 2D image features like lines are extracted from the images and used to model 3D lines using line matching techniques. Theextraction of dense 3D point clouds on the facades is based on a hierarchical point matching strategy over multiple oriented images.Facades are found by robust fitting of plane hypotheses through these 3D line and point clouds. The introduced city modeling systemdelivers a fully 3D geographic information data set and is called MetropoGIS.
series	other
email
last changed	2003/03/11 20:39

_id	ijac20031109
id	ijac20031109
authors	Liu, Yu-Tung; Shen-Kai, Tang
year	2003
title	Space, Place and Digital Media:Towards a Better Simulation of a City that has now Disappeared
source	International Journal of Architectural Computing vol. 1 - no. 1
summary	Digital media enable researchers and designers to derive better informed processes in solving problems of historical architectural restoration and virtual archaeology. However, recently insufficiencies have been found in the main technologies often applied in such techniques, such as 3D modeling, high-quality rendering and animation. Given these problems, this paper attempts to explore a digital reconstruction procedure for historical architecture and cities using 3D scanning, Virtual Reality cave technology and motion capture technology. This case study is based on a collaborative project in conjunction with the National Palace Museum, Taiwan, and the China Times, Taiwan.The five steps involved in this project include data collection and analysis, three-dimensional digital inferences, digital reconstruction of static and moving models, scenario dynamics (by integrating the two kinds of models), and visual-spatial immersion using a VR-cave representation. Finally, a preliminary digital reconstruction procedure is presented.
series	journal
email
more	http://www.multi-science.co.uk/ijac.htm
last changed	2007/03/04 07:08

_id	ecaade03_229_40_monedero
id	ecaade03_229_40_monedero
authors	Monedero, Javier and Muñoz, Francisco
year	2003
title	Data Organization in City Modeling
doi	https://doi.org/10.52842/conf.ecaade.2003.229
source	Digital Design [21th eCAADe Conference Proceedings / ISBN 0-9541183-1-6] Graz (Austria) 17-20 September 2003, pp. 229-236
summary	Working with big models requires a good balance between the technical requirements of the model and the technical requirements of the user. Although every virtual model, whether it is 2d, 3d or 4d, may be regarded as a particular form of a general data base, it is clear that is not, at the present time, a very flexible data base. It does not behave like a relational data base that can be inspected in a flexible way. On the contrary, it has a rigid structure, a hierarchical structure that is well suited for performance but is badly suited for navigating through the data and gathering derived information. These are well known disadvantages and advantages, related to the evolution of the data base software that has moved, in the last 30 years, from a hierarchical to a relational structure. These considerations are relevant for any kind of architectural or engineering model. But are particularly pertinent in the case of the model of a city where everything must have its place, and should relate properly with other parts of the model, be susceptible of further modifications and be able to receive new information. These and other related issues have been encountered and developed during the construction of several models at our Laboratory at the ETS Architecture of Barcelona. Our paper explains the main decisions we had to take during the course of these works with special emphasis on those aspects related with the organization of different kind of data in a unified whole that had to be sent to other professionals and had to be, for that reason, organized in a clear and comprehensible way for its further development.
keywords	CAAD; City Modeling; Visual Simulation
series	eCAADe
email
last changed	2022/06/07 07:58

_id	cf2009_poster_09
id	cf2009_poster_09
authors	Hsu, Yin-Cheng
year	2009
title	Lego Free-Form? Towards a Modularized Free-Form Construction
source	T. Tidafi and T. Dorta (eds) Joining Languages Cultures and Visions: CAADFutures 2009 CD-Rom
summary	Design Media is the tool designers use for concept realization (Schon and Wiggins, 1992; Liu, 1996). Design thinking of designers is deeply effected by the media they tend to use (Zevi, 1981; Liu, 1996; Lim, 2003). Historically, architecture is influenced by the design media that were available within that era (Liu, 1996; Porter and Neale, 2000; Smith, 2004). From the 2D plans first used in ancient egypt, to the 3D physical models that came about during the Renaissance period, architecture reflects the media used for design. When breakthroughs in CAD/CAM technologies were brought to the world in the twentieth century, new possibilities opened up for architects.
keywords	CAD/CAM free-form construction, modularization
series	CAAD Futures
type	poster
last changed	2009/07/08 22:12

_id	avocaad_2003_06
id	avocaad_2003_06
authors	Arturo F. Montagu and Juan Pablo Cieri
year	2003
title	Urbamedia - Development of an urban database of fragments of some Argentinian and Latin-American cities using digital technology
source	LOCAL VALUES in a NETWORKED DESIGN WORLD - ADDED VALUE OF COMPUTER AIDED ARCHITECTURAL DESIGN, Stellingwerff, Martijn and Verbeke, Johan (Eds.), (2004) DUP Science - Delft University Press, ISBN 90-407-2507-1.
summary	The proposal of "Urbamedia" is to undertake the development of 3D virtual and interactive models of historical areas of Latin-American cities. The selected zone is the "Mayo Avenue" including the "Mayo Square", an historical place of the city of Buenos Aires, Argentina; this project is financed by the National Agency of Scientific and Technological Development of Argentina and the University of Buenos Aires.We are presenting the first experimental model of the "Mayo Square" that has been developed at ABACUS, Department of Architecture & Building Aids Computer Unit, University of Strathclyde UK. combined with a system analysis of urban activities using the “Atlas.ti” CAQDAS software.This particular use of the “Atlas.ti” software is under experimental applications to this type of urban analysis procedures; allowed us the possibility to analysed a set of activities by means of graph theory as result of a series of interviews to the people working in the area. We are also looking to include historical areas of three cities: Mar del Plata, Rosario and Santa Fe (Argentina) and eventually other cities from Latin América as Rio de Janeiro and Habana.Due that ABACUS has a strong experience in city modelling plus the powerful software and hardware used there, we must develop a VRML customized menu to be adapted to our low cost PC equipment. The 3D model will be used mainly in urban design simulation procedures and the idea is to extend to other type of simulations of the environmental parameters.
keywords	Architecture, Local values, Globalisation, Computer Aided Architectural Design
series	AVOCAAD
email
last changed	2006/01/16 21:38

_id	ecaade2023_000
id	ecaade2023_000
authors	Dokonal, Wolfgang, Hirschberg, Urs and Wurzer, Gabriel
year	2023
title	eCAADe 2023 Digital Design Reconsidered - Volume 1
doi	https://doi.org/10.52842/conf.ecaade.2023.1.001
source	Dokonal, W, Hirschberg, U and Wurzer, G (eds.), Digital Design Reconsidered - Proceedings of the 41st Conference on Education and Research in Computer Aided Architectural Design in Europe (eCAADe 2023) - Volume 1, Graz, 20-22 September 2023, 905 p.
summary	The conference logo is a bird’s eye view of spiral stairs that join and separate – an homage to the famous double spiral staircase in Graz, a tourist attraction of this city and a must-see for any architecturally minded visitor. Carved out of limestone, the medieval construction of the original is a daring feat of masonry as well as a symbolic gesture. The design speaks of separation and reconciliation: The paths of two people that climb the double spiral stairs separate and then meet again at each platform. The relationship between architectural design and the growing digital repertoire of tools and possibilities seems to undergo similar cycles of attraction and rejection: enthusiasm about digital innovations – whether in Virtual Reality, Augmented Reality, Energy Design, Robotic Fabrication, the many Dimensions of BIM or, as right now, in AI and Machine Learning – is typically followed by a certain disillusionment and a realization that the promises were somewhat overblown. But a turn away from these digital innovations can only be temporary. In our call for papers we refer to the first and second ‘digital turns’, a term Mario Carpo coined. Yes, it’s a bit of a pun, but you could indeed see these digital turns in our logo as well. Carpo would probably agree that design and the digital have become inseparably intertwined. While they may be circling in different directions, an innovative rejoinder is always just around the corner. The theme of the conference asked participants to re-consider the relationship between Design and the Digital. The notion of a cycle is already present in the syllable “re”. Indeed, 20 years earlier, in 2003, we held an ECAADE conference in Graz simply under the title “Digital Design” and our re-using – or is it re-cycling? – the theme can be seen as the completion of one of those cycles described above: One level up, we meet again, we’ve come full circle. The question of the relationship between Design and the Digital is still in flux, still worthy of renewed consideration. There is a historical notion implicit in the theme. To reconsider something, one needs to take a step back, to look into the past as well as into the future. Indeed, at this conference we wanted to take a longer view, something not done often enough in the fast-paced world of digital technology. Carefully considering one’s past can be a source of inspiration. In fact, the double spiral stair that inspired our conference logo also inspired many architects through the ages. Konrad Wachsmann, for example, is said to have come up with his famous Grapevine assembly system based on this double spiral stair and its intricate joinery. More recently, Rem Koolhaas deemed the double spiral staircase in Graz important enough to include a detailed model of it in his “elements of architecture” exhibition at the Venice Biennale in 2014. Our interpretation of the stair is a typically digital one, you might say. First of all: it’s a rendering of a virtual model; it only exists inside a computer. Secondly, this virtual model isn’t true to the original. Instead, it does what the digital has made so easy to do: it exaggerates. Where the original has just two spiral stairs that separate and join, our model consists of countless stairs that are joined in this way. We see only a part of the model, but the stairs appear to continue in all directions. The implication is of an endless field of spiral stairs. As the 3D model was generated with a parametric script, it would be very easy to change all parameters of it – including the number of stairs that make it up. Everyone at this conference is familiar with the concept of parametric design: it makes generating models of seemingly endless amounts of connected spiral stairs really easy. Although, of course, if we’re too literal about the term ‘endless’, generating our stair model will eventually crash even the most advanced computers. We know that, too. – That's another truth about the Digital: it makes a promise of infinity, which, in the end, it can’t keep. And even if it could: what’s the point of just adding more of the same: more variations, more options, more possible ways to get lost? Doesn’t the original double spiral staircase contain all those derivatives already? Don’t we know that ‘more’ isn’t necessarily better? In the original double spiral stair the happy end is guaranteed: the lovers’ paths meet at the top as well as when they exit the building. Therefore, the stair is also colloquially known as the Busserlstiege (the kissing stair) or the Versöhnungsstiege (reconciliation stair). In our digitally enhanced version, this outcome is no longer clear: we can choose between multiple directions at each level and we risk losing sight of the one we were with. This is also emblematic of our field of research. eCAADe was founded to promote “good practice and sharing information in relation to the use of computers in research and education in architecture and related professions” (see ecaade.org). That may have seemed a straightforward proposition forty years ago, when the association was founded. A look at the breadth and depth of research topics presented and discussed at this conference (and as a consequence in this book, for which you’re reading the editorial) shows how the field has developed over these forty years. There are sessions on Digital Design Education, on Digital Fabrication, on Virtual Reality, on Virtual Heritage, on Generative Design and Machine Learning, on Digital Cities, on Simulation and Digital Twins, on BIM, on Sustainability, on Circular Design, on Design Theory and on Digital Design Experimentations. We hope you will find what you’re looking for in this book and at the conference – and maybe even more than that: surprising turns and happy encounters between Design and the Digital.
series	eCAADe
email
last changed	2023/12/10 10:49

_id	ecaade2023_001
id	ecaade2023_001
authors	Dokonal, Wolfgang, Hirschberg, Urs and Wurzer, Gabriel
year	2023
title	eCAADe 2023 Digital Design Reconsidered - Volume 2
doi	https://doi.org/10.52842/conf.ecaade.2023.2.001
source	Dokonal, W, Hirschberg, U and Wurzer, G (eds.), Digital Design Reconsidered - Proceedings of the 41st Conference on Education and Research in Computer Aided Architectural Design in Europe (eCAADe 2023) - Volume 2, Graz, 20-22 September 2023, 899 p.
summary	The conference logo is a bird’s eye view of spiral stairs that join and separate – an homage to the famous double spiral staircase in Graz, a tourist attraction of this city and a must-see for any architecturally minded visitor. Carved out of limestone, the medieval construction of the original is a daring feat of masonry as well as a symbolic gesture. The design speaks of separation and reconciliation: The paths of two people that climb the double spiral stairs separate and then meet again at each platform. The relationship between architectural design and the growing digital repertoire of tools and possibilities seems to undergo similar cycles of attraction and rejection: enthusiasm about digital innovations – whether in Virtual Reality, Augmented Reality, Energy Design, Robotic Fabrication, the many Dimensions of BIM or, as right now, in AI and Machine Learning – is typically followed by a certain disillusionment and a realization that the promises were somewhat overblown. But a turn away from these digital innovations can only be temporary. In our call for papers we refer to the first and second ‘digital turns’, a term Mario Carpo coined. Yes, it’s a bit of a pun, but you could indeed see these digital turns in our logo as well. Carpo would probably agree that design and the digital have become inseparably intertwined. While they may be circling in different directions, an innovative rejoinder is always just around the corner. The theme of the conference asked participants to re-consider the relationship between Design and the Digital. The notion of a cycle is already present in the syllable “re”. Indeed, 20 years earlier, in 2003, we held an ECAADE conference in Graz simply under the title “Digital Design” and our re-using – or is it re-cycling? – the theme can be seen as the completion of one of those cycles described above: One level up, we meet again, we’ve come full circle. The question of the relationship between Design and the Digital is still in flux, still worthy of renewed consideration. There is a historical notion implicit in the theme. To reconsider something, one needs to take a step back, to look into the past as well as into the future. Indeed, at this conference we wanted to take a longer view, something not done often enough in the fast-paced world of digital technology. Carefully considering one’s past can be a source of inspiration. In fact, the double spiral stair that inspired our conference logo also inspired many architects through the ages. Konrad Wachsmann, for example, is said to have come up with his famous Grapevine assembly system based on this double spiral stair and its intricate joinery. More recently, Rem Koolhaas deemed the double spiral staircase in Graz important enough to include a detailed model of it in his “elements of architecture” exhibition at the Venice Biennale in 2014. Our interpretation of the stair is a typically digital one, you might say. First of all: it’s a rendering of a virtual model; it only exists inside a computer. Secondly, this virtual model isn’t true to the original. Instead, it does what the digital has made so easy to do: it exaggerates. Where the original has just two spiral stairs that separate and join, our model consists of countless stairs that are joined in this way. We see only a part of the model, but the stairs appear to continue in all directions. The implication is of an endless field of spiral stairs. As the 3D model was generated with a parametric script, it would be very easy to change all parameters of it – including the number of stairs that make it up. Everyone at this conference is familiar with the concept of parametric design: it makes generating models of seemingly endless amounts of connected spiral stairs really easy. Although, of course, if we’re too literal about the term ‘endless’, generating our stair model will eventually crash even the most advanced computers. We know that, too. – That's another truth about the Digital: it makes a promise of infinity, which, in the end, it can’t keep. And even if it could: what’s the point of just adding more of the same: more variations, more options, more possible ways to get lost? Doesn’t the original double spiral staircase contain all those derivatives already? Don’t we know that ‘more’ isn’t necessarily better? In the original double spiral stair the happy end is guaranteed: the lovers’ paths meet at the top as well as when they exit the building. Therefore, the stair is also colloquially known as the Busserlstiege (the kissing stair) or the Versöhnungsstiege (reconciliation stair). In our digitally enhanced version, this outcome is no longer clear: we can choose between multiple directions at each level and we risk losing sight of the one we were with. This is also emblematic of our field of research. eCAADe was founded to promote “good practice and sharing information in relation to the use of computers in research and education in architecture and related professions” (see ecaade.org). That may have seemed a straightforward proposition forty years ago, when the association was founded. A look at the breadth and depth of research topics presented and discussed at this conference (and as a consequence in this book, for which you’re reading the editorial) shows how the field has developed over these forty years. There are sessions on Digital Design Education, on Digital Fabrication, on Virtual Reality, on Virtual Heritage, on Generative Design and Machine Learning, on Digital Cities, on Simulation and Digital Twins, on BIM, on Sustainability, on Circular Design, on Design Theory and on Digital Design Experimentations. We hope you will find what you’re looking for in this book and at the conference – and maybe even more than that: surprising turns and happy encounters between Design and the Digital.
series	eCAADe
type	normal paper
email
last changed	2024/08/29 08:36

_id	6915
authors	Dorninger, Peter
year	2003
title	XML Technologies and Geodata
source	CORP 2003, Vienna University of Technology, 25.2.-28.2.2003 [Proceedings on CD-Rom]
summary	Photogrammetry and Remote Sensing are very important methods for acquisition of geodata. During the previous decade, severalrevolutionary changes occurred in this area. Until the appearance of automated image analysis tools, it was necessary to measureselected points in the images given. At that time, it was much faster and even cheaper to get images of real world objects compared tothe time and money consuming process of manual analyses. So one tried to minimize this effort by measuring only characteristicpoints such as edges, break-lines, peaks and valleys and, for sure, a grid with a given grid step which was selected to meet the efforts.Lots of information in the images was neglected.Digital point matching algorithms and airborne laser scanning provide many new possibilities. The only restriction on spatialresolution is the one of the used sensors. Given a more precise image sensor, the matching algorithm will be able to match moresurface points; given a higher frequency laser scanner, more points can be measured of the same area. And those sensors get moreand more precise every day. Besides, those techniques allow for fast repetition which is necessary to create time series as a basis for4D modeling! However, this fact is accompanied by several problems concerning the capability of available computers. Some years ago, as the first ideas of 3D city models arose, it was very difficult to acquire the necessary data. Today the new sensors and methods have thenecessary capability, but we are not able to handle the available datasets efficiently, because of shortcomings in the past. In a time ofworld wide data exchange through the internet and global datasets, it is necessary to have efficient methods and algorithms tomanage the available data. There is a need for international, vendor independent data exchange and management standards that haveto be accepted and supported by the industry. This article is going to present several methods of data encoding using standardized data formats based on eXtensible Markup Language (XML). After an introduction to this kind of data encoding, two derived applications for management, storage and presentation of geodata are described. As XML data is written in text format, the datasets have the ability to become rather long.Therefore some promising methods to reduce the amount of data are introduced afterwards. XML documents are mainly used fordata exchange between databases. Therefore the capabilities of commonly used database systems for storage of geodata are describedin the end and current implementation results of the Institute of Photogrammetry and Remote Sensing (I.P.F.) are presented.
series	other
email
last changed	2003/03/11 20:39

_id	sigradi2003_090
id	sigradi2003_090
authors	Espina, Jane
year	2003
title	Ciudades Tradicionales Vs. Ciudades Digitales (Traditional Cities Vs Digital Cities)
source	SIGraDi 2003 - [Proceedings of the 7th Iberoamerican Congress of Digital Graphics] Rosario Argentina 5-7 november 2003
summary	This work presents the creation of a Documentary City which has 3D models of buildings and actualized urban spaces, related to a systematic information and hypermediatical, through the use of a Data Base as a digital tool for the construction of a Data Bank, which will be part of the Digital City of Maracaibo and it could be requested on a physical approach or distance way using digital technologies. The virtual reconstruction and documented part of the history of the city and the records of buildings in different historical growing moments of Maracaibo City, since its foundation until now, will permit recover part of the lost memories of the city. This research will constitute a unpublished experience in Venezuela and belong to the Hypermediatical Model of Maracaibo City of the Institute of Architectonical Research of the Faculty of Architecture and Design in the Universidad del Zulia.
keywords	Data base, tridimensional models, multimedia, digital city, urban spaces.
series	SIGRADI
email
last changed	2016/03/10 09:51

_id	47b3
authors	Gruen, A., Steidler F. and Wang, X.
year	2003
title	Generation and visualization of 3D-city and facility models using CyberCity Modeler (CC-Modeler)
source	CORP 2003, Vienna University of Technology, 25.2.-28.2.2003 [Proceedings on CD-Rom]
summary	The efficient generation of data for 3-D city models and their handling in Spatial Information Systems has become feasible. The derivation of this data from aerial and terrestrial images with semi-automated techniques constitutes the most powerful tool currently available to fulfill this task. Semi-automated object extraction has become a viable concept for the generation of 3-D city models. CyberCity-Modeler (CC-Modeler) has been developed with the aim of creating not only buildings, but also other objects pertaining to a city model efficiently and with a high degree of flexibility concerning the level of detail. In its commercial implementation, CCModeler has been confronted with a number of user requirements which needed to be observed. This led to some extensions in functionality, which are addressed in this paper: Geometrical regularization of buildings, editing functions for topology adjustment, integration of facades and other vertical walls and modeling of overhanging roofs. These extensions of the original concept make CyberCity-Modeler an even more powerful tool for 3-D city modeling.
series	other
last changed	2003/03/11 20:39

_id	ijac20031305
id	ijac20031305
authors	Kos, José R.
year	2003
title	3D models of urban icons: tracing Benjamin and Koolhaas
source	International Journal of Architectural Computing vol. 1 - no. 3
summary	Walter Benjamin and Rem Koolhaas developed two significant investigations, which explored the culture of Paris and New York through the analysis of their architectural artifacts. Their research projects successfully construct, from a few meaningful components of the built environment, an understanding of the overall city and its society. The objective of this paper is to address the similarities between the research carried out at the Federal University of Rio de Janeiro and the work of these two acclaimed writers. Our group aims to select urban icons, from different moments and areas in Rio de Janeiro, to be studied in order to understand the city evolution in the 20th Century. The distinguished Ministry of Education building is the investigation's prototype, analyzed thorough several 3D models and other digital techniques. We conclude that a thorough study of Benjamin's and Koolhaas' work should be considered a primary support for the interrogation of our own investigation.
series	journal
type	normal paper
email
more	http://www.multi-science.co.uk/ijac.htm
last changed	2007/03/04 07:08

_id	ecaade03_387_139_kos
id	ecaade03_387_139_kos
authors	Kós, José Ripper
year	2003
title	3D models as a base for historical narrative experiments
doi	https://doi.org/10.52842/conf.ecaade.2003.387
source	Digital Design [21th eCAADe Conference Proceedings / ISBN 0-9541183-1-6] Graz (Austria) 17-20 September 2003, pp. 387-396
summary	Historians have relied mostly in descriptive narratives to represent their research. In the first half of the XX century, with the influence of other disciplines, that instrument started to be questioned. This paper aims to overview that debate and the search for new forms of historical representation that would overcome most of the historians’ alleged shortcomings. A web-based system that relates 3D city models to a database of historical documents of a great variety of sources is presented as a digital alternative for the representation of Rio de Janeiro’s history.
keywords	3D city models; historical narratives; database; cultural history; urban evolution
series	eCAADe
email
more	http://www.fau.ufrj.br/prourb/jkos.htm
last changed	2022/06/07 07:52

_id	7655
authors	Okeil, Ahmad and El Araby, Mostafa
year	2003
title	Realism vs. Reality in Digital Reconstruction of Cities
source	CORP 2003, Vienna University of Technology, 25.2.-28.2.2003 [Proceedings on CD-Rom]
summary	The digital reconstruction of existing cities using virtual reality techniques is being increasingly used. For consultants, municipalities and planning departments these models provide decision support through visual simulations (El Araby, 2001). For academia they provide a new tool for teaching students urban design and planning (Okeil, 2001). For authorities they provide a tool for promoting the city on the world wide web trying to attract more businesses and tourists to it. The built environment is very rich in detail. It does not only consist of open spaces surrounded by abstract buildings but it also includes many smaller objects such as street furniture, traffic signs, street lights, different types of vegetation and shop signs for example. All surfaces in the built environment have unique properties describing color, texture and opacity. The built environmentis dynamic and our perception is affected by factors such as pedestrian movement, traffic, environmental factors such as wind, noise and shadows. The built environment is also shaped by the accumulation of changes caused by many influences through time. All these factors make the reconstruction of the built environment a very complex task. This paper tries to answer the question: how realistic the reconstructed models of urban areas can be. It sees “Realism“ as a variable floating between three types of realties. The reality of the physical environment which we are trying to represent. The reality of the digital environment which will host the digitally reconstructed city. And the reality of the working environment which deals with the problem of limitation of resources needed to digitally reconstruct the city. A case study of building a 3D computer model of an urban area in the United Arab Emirates demonstrates that new time-saving techniques for data acquisition can enhance realism by meetingbudget limitations and time limitations.
keywords	Virtual Reality; Photo Realism; Texture Maps; 3D Modeling; Urban Design
series	other
email
last changed	2003/03/11 20:39

_id	ecaade03_217_35_peng
id	ecaade03_217_35_peng
authors	Peng, Chengzhi
year	2003
title	Visualising City in Change with the MEDIUM Platform
doi	https://doi.org/10.52842/conf.ecaade.2003.217
source	Digital Design [21th eCAADe Conference Proceedings / ISBN 0-9541183-1-6] Graz (Austria) 17-20 September 2003, pp. 217-224
summary	Work on a methodology that attempts to deliver a dynamic urban information system for visualising city in change is presented. We have developed a Multi-tier Extensible platform for Dynamic and Interactive Urban Modelling (MEDIUM) in connection with a large-scale historical urban study programme that investigates the history of the City of Sheffield. The MEDIUM platform shows some new properties that could address the limitations observed in conventional static urban modelling. We consider that 3D virtual city models can be created along a chronological axis and the time dimension of each model segment can be registered in such a way that the 3D models of different times can be brought together under a unifying visualisation platform. This will allow a visual understanding of how a city may have evolved to develop. To date, we have applied the MEDIUM platform to real city datasets and produced examples that allow us to examine what effects of urban visualisation could be achieved through the dynamic user-centred approach.
keywords	Dynamic urban modelling; virtual city; urban study, VRML; Web.
series	eCAADe
email
more	http://sucod.shef.ac.uk
last changed	2022/06/07 07:59

_id	sigradi2003_127
id	sigradi2003_127
authors	Ripper Kós, José
year	2003
title	Modelos 3D e banco de dados: investigações de narrativas históricas (3D models and database: investigations on historical narratives)
source	SIGraDi 2003 - [Proceedings of the 7th Iberoamerican Congress of Digital Graphics] Rosario Argentina 5-7 november 2003
summary	RIO-H is a web-based system that aims to present an alternative to historical narrative. Images from 3D historical models of Rio de Janeiro link spaces within the city to historical documents stored in a database. The users retrieve the files of different sources associated to specific areas in the city. The 3D historical images facilitate the creation of relationships between the city in the past and the current city users dwell. Thus, users experience in the current city is critical for the generation of images of the past city and individual historical narratives as they navigate through the system.
series	SIGRADI
email
last changed	2016/03/10 09:58

_id	ecaade03_247_121_strojan
id	ecaade03_247_121_strojan
authors	Zupancic Strojan, Tadeja and Mullins, Michael
year	2003
title	Theoretical Perspectives For The Development Of 3D City Models In Architectural Education
doi	https://doi.org/10.52842/conf.ecaade.2003.247
source	Digital Design [21th eCAADe Conference Proceedings / ISBN 0-9541183-1-6] Graz (Austria) 17-20 September 2003, pp. 247-252
summary	This paper continues the discourse of the round table session of eCAADe 2002 on the problems of existing digital city models. It reviews recent papers on the subject, suggests criteria for the improvement of digital city models, and points out some applications for a broader base of users, and particularly in the field of architectural education. it is suggested here that the design professions of architecture and urban design should be more comprehensively included by broadening the approach to 3dcms. Changes in contemporary architectural, urban planning and design theory, collaborative design practice and constructivist education, lead us to suggest a change of emphasis from 2D urban planning principles to those of 3D urban design and morphology.
keywords	3D City Models; architectural education; urban identity
series	eCAADe
type	normal paper
email
more	http://www.arh.uni-lj.si
last changed	2022/06/07 07:57

_id	sigradi2003_133
id	sigradi2003_133
authors	Armesto, T., Morín, A. and Premern, C.
year	2003
title	Hacia una RV de Representación Hiperrealista (Towards a VR of Hyper-realistic Representation)
source	SIGraDi 2003 - [Proceedings of the 7th Iberoamerican Congress of Digital Graphics] Rosario Argentina 5-7 november 2003
summary	The objetive of the proyect is the hiperrealistic simulation of scenarios on standard PCs. We use the same tools that are used by the entertainment industry (3d graphics engines) to get the highest level of realism possible in 3d worlds. By now, we are exploring only the audio and visual areas. The potencial of this 3d enviorments construction tools let us to create exploration enviorments for academic and professional implementation like commerce, tourism, education, communication, etc.
series	SIGRADI
email
last changed	2016/03/10 09:47

_id	ecaade03_561_150_martens
id	ecaade03_561_150_martens
authors	Martens, Yuri and Koutamanis, Alexander
year	2003
title	Realestate online information systems
doi	https://doi.org/10.52842/conf.ecaade.2003.561
source	Digital Design [21th eCAADe Conference Proceedings / ISBN 0-9541183-1-6] Graz (Austria) 17-20 September 2003, pp. 561-567
summary	Several commercial real-estate sites provide listings of available commercial property on the Internet. These listings are generated on the basis of selection criteria as floor area, price and location. Despite the obvious utility of the listings and their promise for the transaction process and market transparency, one third of commercial realestate listing sites went bankrupt in 2001 and 2002. To provide an explanation for the failure, 63 commercial real-estate sites were analysed and classified into three basic business models: the Research / Information model, the Marketing model and the Transaction model. A common success factor for all models is the functionality of the site, especially interaction between the user and the available information. The paper proposes that the transfer of existing architectural representations, information-processing instruments and decision-taking tools is an essential component of future development towards integrated services that accompany a building throughout its lifecycle. This transfer amounts to (1) the addition of building and contextual information from standard documentation and online information services, (2) the derivation and coherent description of programmatic requirements database, and (3) advanced user interaction with building information.
keywords	e-commerce, human-computer interaction, building information systems,web-based communication
series	eCAADe
email
more	http://www.re-h.nl
last changed	2022/06/07 07:59

_id	acadia03_031
id	acadia03_031
authors	Paolo Fiamma
year	2003
title	Architectural Design and Digital Paradigm: from Renaissance Models to Digital Architecture
doi	https://doi.org/10.52842/conf.acadia.2003.247
source	Connecting >> Crossroads of Digital Discourse [Proceedings of the 2003 Annual Conference of the Association for Computer Aided Design In Architecture / ISBN 1-880250-12-8] Indianapolis (Indiana) 24-27 October 2003, pp. 247-253
summary	Means of expression have always affected our ways of thinking. Designers, who have to interpret signs, languages, and evolution in order to translate into an organised “form” the recurring problems and values of mankind, have left thoughts, projects and wishes to the study of representational techniques. In this way, they have also disclosed a unique view of reality and at the same time a “way of being” towards the meaning of design itself. In the relationship between architecture and representational techniques, Brunelleschi said that “perspicere” was no longer just the science of optics, but also the science that contained the lines of research on geometry and shape that he was the first to exploit in design. Centuries later, in the axonometric representation advocated by De Stijl and intended for factories and industries, the object, shown in all its parts, easy to reconstruct even in the space to which it referred, revealed with extreme clarity the mass-production building and assembly materials and systems. Digital representational media make a great entrance in the heuristic process, invalidate all signs, and promote its quality. The result is an ever-changing, computerised architecture, dominated by curvilinear, wavy shapes that flow from a generative process made of the deformations, additions, and interference of different volumes.
series	ACADIA
email
last changed	2022/06/07 08:00

_id	acadia03_025
id	acadia03_025
authors	Serriano, Pierluigi
year	2003
title	Form Follows Software
doi	https://doi.org/10.52842/conf.acadia.2003.185
source	Connecting >> Crossroads of Digital Discourse [Proceedings of the 2003 Annual Conference of the Association for Computer Aided Design In Architecture / ISBN 1-880250-12-8] Indianapolis (Indiana) 24-27 October 2003, pp. 185-205
summary	Software selection affects design outcome. Computer applications externalize in their graphical interface and in their internal logic a set of assumptions about how objects are constructed and space is represented. Accessibility of tools is in direct correlation with their rate of use. Depending on how user-friendly particular functions are, their use will appear with higher frequency than those foreign to the technological frames of the user groups for which software is designed. As each software is geared towards the needs of specific communities, it replicates in digital fashion those disciplinary practices already present in the analog world. However, modeling results are bracketed at its inception the very moment a particular 3D package is chosen from a diverse array of digital offerings. If the application adopted is designed to appeal to the computer animation industry, the modeling results will bear the imprint of those organic qualities: buildings will appear character-like. Since computer programs have built-in slant meant to aid disciplinary specific users, they yield families of designs with formal commonalities. Unquestionably, proficiency of software use also broadens inventiveness of design. Nevertheless some applications make particular transformations harder to achieve, and as a result will be likely to exclude those modeling options from architects’ imaginary world.
keywords	modeling options, built-in slants, form-making, technology of orders.
series	ACADIA
last changed	2022/06/07 07:57

For more results click below: