Cumincad : CUMINCAD Papers : Search Results

CumInCAD is a Cumulative Index about publications in Computer Aided Architectural Design
supported by the sibling associations ACADIA, CAADRIA, eCAADe, SIGraDi, ASCAAD and CAAD futures

PDF papers
References

Hits 1 to 20 of 335

Reformat results as: short short into frame detailed detailed into frame

_id	745f
id	745f
authors	Bauni Hamid; Devin Defriza
year	2003
title	A Preliminary Model of Community-based Integrated Information System for Urban Spatial Development
source	Proceeding of the 3rd China Urban Housing Conference, July 3-5 2003, Center for Housing Innovations, Chinese University of Hong Kong, ISBN 962-8272-26-8, pp. 417-424
summary	This paper describes a research on building Integrated Information System for Urban Spatial Development. The objective of the research phase discussed in this paper is to define a prototype of information system that basically facilitates information communication among involved participants in an urban spatial development planning. The system is designed by putting stress on local community. Their spatial perception and the availability of GIS technology in local context become constraints in building the system. Internet becomes the main alternative for information dissemination for this phase. This is also supported by the use of web-based GIS as framework of information system. Through few socialization sessions, the proposed model has indicated a prospected alternative to be seamless communication media among participants. To support an easy-access for local people in using this information system a mechanism of information access has been proposed in the form of local information center.
keywords	information system, digital model, urban development, community, participation
series	other
type	paper session
email
last changed	2007/02/04 06:15

_id	cf2003_m_040
id	cf2003_m_040
authors	BAY, Joo-Hwa
year	2003
title	Making Rebuttals Available Digitally for Minimising Biases in Mental Judgements
source	Digital Design - Research and Practice [Proceedings of the 10th International Conference on Computer Aided Architectural Design Futures / ISBN 1-4020-1210-1] Tainan (Taiwan) 13–15 October 2003, pp. 147-156
summary	The problem of heuristic biases (illusions) discussed by Tversky and Kahneman (1982) that can lead to errors in judgement by human designers, when they use precedent knowledge presented graphically (Bay 2001). A Cognitive framework of belief, goal, and decision, and a framework of representation of architectural knowledge by Tzonis are used to map out the problem of heuristic biases in the human mind. These are used to discuss what aspects of knowledge can be presented explicitly and digitally to users to make rebuttal more available for human thinking at the cognitive level. The discussion is applicable to both inductive and analytic digital knowledge systems that use precedent knowledge. This discussion is targeted directly at means of addressing bias in the human mind using digital means. The problem of human bias in machine learning and generalisation are discussed in a different paper, and the problems of international or non-intentional machine bias are not part of discussion in this paper.
keywords	analogy, bias, design thinking, environmental design, heuristics
series	CAAD Futures
last changed	2003/11/22 07:26

_id	caadria2003_c4-3
id	caadria2003_c4-3
authors	Belblidia, S. and Alby, E.
year	2003
title	Implicit Handling of Geometric Relations in an Existing Modeler
source	CAADRIA 2003 [Proceedings of the 8th International Conference on Computer Aided Architectural Design Research in Asia / ISBN 974-9584-13-9] Bangkok Thailand 18-20 October 2003, pp. 613-622
doi	https://doi.org/10.52842/conf.caadria.2003.613
summary	This paper presents a constraint-based modeling system, integrated into a widely used CAD modeler. Using a notification mechanism, the system records the precision functions called by the user in order to maintain geometric relations between points locations and source objects. These relations are stored in a directed graph which allows an automatic update of the model.
series	CAADRIA
email
last changed	2022/06/07 07:54

_id	c35c
authors	Bender, Oliver
year	2003
title	The Geographical Alpine Information System “Galpis” in the Raumalp Project. Outlay and Output
source	CORP 2003, Vienna University of Technology, 25.2.-28.2.2003 [Proceedings on CD-Rom]
summary	RAUMALP, an interdisciplinary research project of the Austrian Academy of Sciences, shall examine problem areas of spatial development on community level in the Austrian alpine region. The aim is the investigation of scientific basics for political decision finding, especially for the regional-specific realisation of the Alpine Convention. All ascertained information shall be included in “GALPIS”, a comprehensive Alpine Space Information System. GALPIS based on ESRI ArcGIS and MS Access software works with data from different sources, like ISIS, the electronic data base of Statistic Austria, and original data and maps gathered and elaborated by the working groups of RAUMALP. This also includes ecological raster data. Dealing with administrative units, „real“ space and raster space, RAUMALP will integrate the different space levels mostly to administrative spatial units representing the existing 1145 communities of the RAUMALP study area. This will be realised by overlay of grids, types of land use and communitypolygons. Major task of GALPIS is a conversion of former communal data (p. e. 1451 communities in 1951) that should represent the recent administrative boundaries. By this way it is possible to make thematic and time-integrative analyses of community data. GIS modelling of the six case studies is more complex. The conceptual model has to integrate several vector and raster layers such as land plots (“Digitale Katastralmappe”), types of land use (“Land Use and Land Cover Austria” by M. Seger) and biodiversity. P. e., the working group settlement is using a logical data model based on the entity “building” with the attributes “construction”,“function”, etc.
series	other
email
last changed	2003/11/21 15:16

_id	f8f7
id	f8f7
authors	Bhzad Sidawi
year	2003
title	The pattern of Internet use for information management by architectural practices in the UK
source	Cardiff University, Welsh School of Architecture Cardiff, UK
summary	In recent history, architects have experienced problems related to the use and management of new innovations. The Internet presents one such challenge. It offers considerable expansion in types of communication and sources of business information and connects people and businesses around the globe. As is argued in this research, these services could play a positive role in architectural practice. This research examines the use of the Internet by architectural practices in UK in order to reveal how aware they are of the opportunities it presents, the extent to which they are taking advantage of them, and the problems they are experiencing. A field study was conducted of two types of practices: RIBA private practices and local authority practices. A number of research tools were used to inspect how these practices are using the Internet to manage various types of information that used and produced in the practice, namely: the acquisition of web information, the exchange of the practice’s information through the web and the presentation of the practice’s information on the web. Explanations for the results were sought by correlating variables from the questionnaire study, using simple statistical tests. The field study shows that many Internet services are unpopular among architects, and that practices have problems in adopting and using the technology. The pace at which the Internet is being absorbed and accepted by practices is slow. The study suggests that possible causes are: the little knowledge of users’ about IT, the poor resources of the practice, and old or imperfect Internet installations and the absence of the Internet support to the architect’s activities. The research argues that there are a number of links between these negative factors which make the practice unable to utilize the Internet and to manage the practice’s information through the Internet. To break these links, the research suggests that practices should adopt a specific management strategy to promote more utilization of Internet services in the office and to manage information. Practices need to make certain changes to the way they manage the Internet and work with it, if they plan to integrate the Internet more successfully into their practice. The research discusses techniques for improving practice management which would help practices to digest Internet technology and to use it more effectively in the practice.
keywords	Internet, Architectural practices, Information management, Communications
series	thesis:PhD
type	normal paper
email
last changed	2006/11/03 23:29

_id	sigradi2003_043
id	sigradi2003_043
authors	Bianchi, N., Montelpare, A. and Soboleosky, L.
year	2003
title	El aprendizaje inicial del proceso proyectual (The initial learning of the design process)
source	SIGraDi 2003 - [Proceedings of the 7th Iberoamerican Congress of Digital Graphics] Rosario Argentina 5-7 november 2003
summary	The act of design using the graphic language is esential to the organization and determination of the process. Introducing digital tools modifies the design project research. Its application faces the traditional experience and encourages different demands conceptually and operatively. We wonder if the use of digital media, from the very beginning, is possible or pupils must have trainning in the use of conventional graphic in order to be meaningfull. Our proposition is to include digital technology from the beginnitng of the teaching process, in order to explore the potencial of each mode and promoving to learn the normative background.
keywords	Initial learning design, analog and digital modes
series	SIGRADI
email
last changed	2016/03/10 09:47

_id	caadria2003_b5-2
id	caadria2003_b5-2
authors	Caldas, Luisa G.
year	2003
title	Shape Generation Using Pareto Genetic Algorithms Integrating Conflicting Design Objectives in Low-Energy Architecture
source	CAADRIA 2003 [Proceedings of the 8th International Conference on Computer Aided Architectural Design Research in Asia / ISBN 974-9584-13-9] Bangkok Thailand 18-20 October 2003, pp. 681-694
doi	https://doi.org/10.52842/conf.caadria.2003.681
summary	The Generative Design System [GDS] presented in this paper was developed to assist designers in researching low-energy architecture solutions. The GDS has the capability to evolve architectural forms that are energy-efficient, while complying to design intentions expressed by the architect, and responding to conflicting objectives. To achieve this evolutionary development, the system integrates a search and optimization method [Genetic Algorithm], a building energy simulation software [DOE2.1E], and Pareto multicriteria optimization techniques. The GDS adaptively generates populations of alternative solutions, from an initial schematic layout and a set of rules and constraints designed by the architect to encode design intentions. The two conflicting objective functions considered in this paper are maximizing daylighting use, and minimizing energy consumption for conditioning the building. The GDS generated an uniformly sampled, continuous Pareto front, from which six points were visualized in terms of the proposed architectural solutions.
series	CAADRIA
email
last changed	2022/06/07 07:54

_id	cf2003_m_039
id	cf2003_m_039
authors	CANEPARO, Luca and ROBIGLIO, Matteo
year	2003
title	UrbanLab - Agent-Based Simulation of Urban and Regional Dynamics
source	Digital Design - Research and Practice [Proceedings of the 10th International Conference on Computer Aided Architectural Design Futures / ISBN 1-4020-1210-1] Tainan (Taiwan) 13–15 October 2003, pp. 279-290
summary	An overview of the two stages of the UrbanLab model is presented, focusing on the layering between the two stages: the first using GIS based socio-economic data, communicating the second stage, which is an agent-based dynamic model of citizens’ activities.
keywords	agent, planning, simulation, urban design, user participation
series	CAAD Futures
email
last changed	2003/09/22 12:21

_id	caadria2003_b1-2
id	caadria2003_b1-2
authors	Chakraborty, Somen
year	2003
title	Automated Generation of Residential Roomlayout within a Constrained Covered Area
source	CAADRIA 2003 [Proceedings of the 8th International Conference on Computer Aided Architectural Design Research in Asia / ISBN 974-9584-13-9] Bangkok Thailand 18-20 October 2003, pp. 85-100
doi	https://doi.org/10.52842/conf.caadria.2003.085
summary	A significant quantum of all buildings constructed in modern times is designed for residential purpose. A tremendous amount of money is being spent every year for construction of residential buildings. Therefore, optimization of design becomes very important. In a country like India most people in urban area live in houses having constrained area. A significant part of residential units comes under mass housing either as high-rise building blocks or as plotted developments. In any of such schemes there are large number of housing units for a group of families of whom general characteristics are known but characteristics of individual families are not known at the time of designing. This situation is, however, suitable for scientific investigation and analysis based on statistical surveys. Broadly speaking, this paper suggests approach to deal with this situation of finding optimum layout of rooms of a housing unit for any target group of families when the covered area is so constrained that freedom of using different criteria like aesthetics, structural systems, materials and methods of construction in varieties of ways is drastically reduced. In such constrained area for housing units rooms are generally found rectangular within overall rectangular outline of each unit. Method shown here is valid under this restriction. It is also assumed that number of rooms will be restricted to such number that exhaustive search for design is practically possible within a reasonable time with present day capabilities of normally available PCs.
series	CAADRIA
email
last changed	2022/06/07 07:55

_id	cf2003_m_103
id	cf2003_m_103
authors	CHANG, T.-W., WOODBURY, R. and DATTA, S.
year	2003
title	Interactive Mapping between Knowledge Level and Symbol Level with Geometry. A KL-Model for Design Space Exploration
source	Digital Design - Research and Practice [Proceedings of the 10th International Conference on Computer Aided Architectural Design Futures / ISBN 1-4020-1210-1] Tainan (Taiwan) 13–15 October 2003, pp. 157-166
summary	Design space exploration is long-standing motivating ideas in computer-aided design. It realises this vision through a model of design states for making and moving amongst states and an organisation of states into a structure called a design space. Using a design space structuring mechanism based on a subsumption relation, this paper sketches a theory called Geometric Typed Feature Structures (GTFS) to preserve the formal properties of the design space movement algorithms for geometry. It also provides the theory for incorporation of user-guided exploration in the design space. Consequently, the clear division between knowledge level and symbol level, such that functional decomposition •• formal symbol level and design •• model symbol level, disappears. We can therefore use the same subsumption relation to structure the design space exploration interactively. Such interactive mapping between knowledge level and symbol level provides the fine-grained opportunities for user intervention in formal design space movement algorithms. In this paper, we summarize this approach with an example of GTFS subsumption process.
keywords	design space, geometric description, knowledge level, subsumption, unfolding
series	CAAD Futures
email
last changed	2003/09/22 12:21

_id	caadria2003_a4-3
id	caadria2003_a4-3
authors	Chang, Yu-Li
year	2003
title	Dual Interface Between Physical and Digital Cities Cyberspatial Cognitive Approach to Thread Digital City In Physical City
source	CAADRIA 2003 [Proceedings of the 8th International Conference on Computer Aided Architectural Design Research in Asia / ISBN 974-9584-13-9] Bangkok Thailand 18-20 October 2003, pp. 523-538
doi	https://doi.org/10.52842/conf.caadria.2003.523
summary	Today, digital cities are being developed all over the world. By using a city metaphor, digital cities integrate urban information and create public spaces. However, human how to entry into the new emerging digital cities, to percept themselves in around cities, and then taking shape the recognition of digital city forms? This paper studied by the viewpoint of cognition in order to explore the structure of the new style spatiality as cyberspace. By exploring the factors of human spatial cognition in physical space to interpret that human how to image and percept the spatial form of digital cities by the spatial experience in physical space, to construct the dual interface of spatial cognition of interaction between digital cities and physical cities.
series	CAADRIA
email
last changed	2022/06/07 07:55

_id	caadria2003_a5-4
id	caadria2003_a5-4
authors	Chang, Yu-Li
year	2003
title	The Prototype of Digital Cities On Line A Cognition-Oriented Approach for Spatially Metaphorical Model
source	CAADRIA 2003 [Proceedings of the 8th International Conference on Computer Aided Architectural Design Research in Asia / ISBN 974-9584-13-9] Bangkok Thailand 18-20 October 2003, pp. 651-662
doi	https://doi.org/10.52842/conf.caadria.2003.651
summary	The cyberspace upon physical space forms a new spatial structure to increase the influence on the urban fabric and the concept of space in architecture. Today, digital cities are being developed all over the world. By using a city metaphor, digital cities integrate urban information and create public spaces. However, human how to entry into the new emerging digital cities, to percept themselves in around cities, and then taking shape the recognition of digital city forms? How do digital cities directly connect to physical cities and become an imaginable city? Therefore, we argue that a new spatial analysis theory must be established for digital city, comparing with theories of spatial cognition, to find the explicitly spatial structures and relations in digital city upon physical city. This paper studied by the viewpoint of cognition in order to propose a prototype of metaphor of digital city.
series	CAADRIA
email
last changed	2022/06/07 07:55

_id	caadria2003_a7-1
id	caadria2003_a7-1
authors	Chantawit, D. and Hadikusumo, B.H.W.
year	2003
title	Integrated 4d Cad and Construction Safety Planning Information for a Better Safety Management
source	CAADRIA 2003 [Proceedings of the 8th International Conference on Computer Aided Architectural Design Research in Asia / ISBN 974-9584-13-9] Bangkok Thailand 18-20 October 2003, pp. 891-904
doi	https://doi.org/10.52842/conf.caadria.2003.891
summary	Safety is an important element of project successes. In the conventional project management, safety planning, as a function, is separated from other functions, such as planning/scheduling function. This separation creates difficulties for engineers to analyze what, when, why and where a safety measure is needed to prevent accidents in a construction activity. Another problem occurs due to the conventional practice of representing project designs using two-dimensional (2D) drawings. In this practice, a user (e.g. an engineer) has to convert the 2D drawings into three-dimensional (3D) mental pictures, and this is a tedious task. If only converting this 2D drawing is a tedious task, combining these 2D drawings with safety planning creates more difficult tasks. In order to address the problems, this paper discusses our research in integrating construction scheduling and safety planning in a 4D environment.
series	CAADRIA
last changed	2022/06/07 07:55

_id	caadria2003_c1-3
id	caadria2003_c1-3
authors	Cheng, N. Y. and Lane-Cummings, S.
year	2003
title	Using Mobile Digital Tools for Learning about Places
source	CAADRIA 2003 [Proceedings of the 8th International Conference on Computer Aided Architectural Design Research in Asia / ISBN 974-9584-13-9] Bangkok Thailand 18-20 October 2003, pp. 145-156
doi	https://doi.org/10.52842/conf.caadria.2003.145
summary	To explore how mobile digital tools can bring students out from isolated classrooms, we tested several for use in design studio site visits. We focused on small, off-the-shelf tools that are inexpensive and easy to upgrade. In this paper we identify the logistical, efficiency, and learning considerations for the selection and introduction of mobile digital tools , with observations about device usability and administration that are applicable to other kinds of technology introduction. We found that adoption of a tool depends on several factors, including ease of use and inconspicuous nature. Compared to traditional tools, most of these tools require a great deal of set-up time before students can use them efficiently. In addition, they require docking with a computer to analyze the information collected in the field. As a result, most of the learning takes place in the studio, rather than in the field. Our eventual goal is to clarify the potentials of place-recording tools, making it easier to gather and use a toolkit for specific situations.
series	CAADRIA
email
last changed	2022/06/07 07:55

_id	caadria2006_597
id	caadria2006_597
authors	CHOR-KHENG LIM, CHING-SHUN TANG, WEI-YEN HSAO, JUNE-HAO HOU, YU-TUNG LIU
year	2006
title	NEW MEDIA IN DIGITAL DESIGN PROCESS: Towards a standardize procedure of CAD/CAM fabrication
source	CAADRIA 2006 [Proceedings of the 11th International Conference on Computer Aided Architectural Design Research in Asia] Kumamoto (Japan) March 30th - April 2nd 2006, 597-599
doi	https://doi.org/10.52842/conf.caadria.2006.x.r4i
summary	In 1990, due to the traditional architecture design and construction method difficult to build the complicated and non-geometry free-form Fish Structure in Barcelona, architect Frank Gehry started learn from the field of aerospace to utilize CAD/CAM technology in design and manufacture process. He created the free-form fish model in CAD system and exported the digital CAD model data to CAM machine (RP and CNC) to fabricate the design components, and finally assembled on the site. Gehry pioneered in the new digital design process in using CAD/CAM technology or so-called digital fabrication. It becomes an important issue recently as the CAD/CAM technology progressively act as the new digital design media in architectural design and construction process (Ryder et al., 2002; Kolarevic, 2003). Furthermore, in the field of architecture professional, some commercial computer systems had been developed on purpose of standardizes the digital design process in using CAD/CAM fabrication such as Gehry Technologies formed by Gehry Partners; SmartGeometry Group in Europe and Objectile proposed by Bernard Cache. Researchers in the research field like Mark Burry, Larry Sass, Branko Kolarevic, Schodek and others are enthusiastic about the exploration of the role of CAD/CAM fabrication as new design media in design process (Burry, 2002; Schodek et al., 2005; Lee, 2005).
series	CAADRIA
email
last changed	2022/06/07 07:50

_id	cf2003_m_034
id	cf2003_m_034
authors	DING, L, LIEW, P.-S., MAHER, M.-L., GERO, J.S. and DROGEMULLER, R.
year	2003
title	Integrating CAD and 3D Virtual Worlds Using Agents and EDM
source	Digital Design - Research and Practice [Proceedings of the 10th International Conference on Computer Aided Architectural Design Futures / ISBN 1-4020-1210-1] Tainan (Taiwan) 13–15 October 2003, pp. 301-312
summary	This paper develops an overall architecture for integrating CAD and virtual worlds. The advantages of having access to the building model in a virtual world include the collaborative nature of the world. The EDM database as an object-oriented database is developed to establish a common object-oriented representation of building model, which can be accessed by both CAD systems and virtual worlds. The integration between CAD systems and an EDM database is implemented through the use of Industry Foundation Classes (IFCs) as an intermediate data model and the communication between the database and virtual worlds is developed through agents.
keywords	agents, IFC, virtual world
series	CAAD Futures
email
last changed	2003/09/22 12:21

_id	ecaade2023_000
id	ecaade2023_000
authors	Dokonal, Wolfgang, Hirschberg, Urs and Wurzer, Gabriel
year	2023
title	eCAADe 2023 Digital Design Reconsidered - Volume 1
source	Dokonal, W, Hirschberg, U and Wurzer, G (eds.), Digital Design Reconsidered - Proceedings of the 41st Conference on Education and Research in Computer Aided Architectural Design in Europe (eCAADe 2023) - Volume 1, Graz, 20-22 September 2023, 905 p.
doi	https://doi.org/10.52842/conf.ecaade.2023.1.001
summary	The conference logo is a bird’s eye view of spiral stairs that join and separate – an homage to the famous double spiral staircase in Graz, a tourist attraction of this city and a must-see for any architecturally minded visitor. Carved out of limestone, the medieval construction of the original is a daring feat of masonry as well as a symbolic gesture. The design speaks of separation and reconciliation: The paths of two people that climb the double spiral stairs separate and then meet again at each platform. The relationship between architectural design and the growing digital repertoire of tools and possibilities seems to undergo similar cycles of attraction and rejection: enthusiasm about digital innovations – whether in Virtual Reality, Augmented Reality, Energy Design, Robotic Fabrication, the many Dimensions of BIM or, as right now, in AI and Machine Learning – is typically followed by a certain disillusionment and a realization that the promises were somewhat overblown. But a turn away from these digital innovations can only be temporary. In our call for papers we refer to the first and second ‘digital turns’, a term Mario Carpo coined. Yes, it’s a bit of a pun, but you could indeed see these digital turns in our logo as well. Carpo would probably agree that design and the digital have become inseparably intertwined. While they may be circling in different directions, an innovative rejoinder is always just around the corner. The theme of the conference asked participants to re-consider the relationship between Design and the Digital. The notion of a cycle is already present in the syllable “re”. Indeed, 20 years earlier, in 2003, we held an ECAADE conference in Graz simply under the title “Digital Design” and our re-using – or is it re-cycling? – the theme can be seen as the completion of one of those cycles described above: One level up, we meet again, we’ve come full circle. The question of the relationship between Design and the Digital is still in flux, still worthy of renewed consideration. There is a historical notion implicit in the theme. To reconsider something, one needs to take a step back, to look into the past as well as into the future. Indeed, at this conference we wanted to take a longer view, something not done often enough in the fast-paced world of digital technology. Carefully considering one’s past can be a source of inspiration. In fact, the double spiral stair that inspired our conference logo also inspired many architects through the ages. Konrad Wachsmann, for example, is said to have come up with his famous Grapevine assembly system based on this double spiral stair and its intricate joinery. More recently, Rem Koolhaas deemed the double spiral staircase in Graz important enough to include a detailed model of it in his “elements of architecture” exhibition at the Venice Biennale in 2014. Our interpretation of the stair is a typically digital one, you might say. First of all: it’s a rendering of a virtual model; it only exists inside a computer. Secondly, this virtual model isn’t true to the original. Instead, it does what the digital has made so easy to do: it exaggerates. Where the original has just two spiral stairs that separate and join, our model consists of countless stairs that are joined in this way. We see only a part of the model, but the stairs appear to continue in all directions. The implication is of an endless field of spiral stairs. As the 3D model was generated with a parametric script, it would be very easy to change all parameters of it – including the number of stairs that make it up. Everyone at this conference is familiar with the concept of parametric design: it makes generating models of seemingly endless amounts of connected spiral stairs really easy. Although, of course, if we’re too literal about the term ‘endless’, generating our stair model will eventually crash even the most advanced computers. We know that, too. – That's another truth about the Digital: it makes a promise of infinity, which, in the end, it can’t keep. And even if it could: what’s the point of just adding more of the same: more variations, more options, more possible ways to get lost? Doesn’t the original double spiral staircase contain all those derivatives already? Don’t we know that ‘more’ isn’t necessarily better? In the original double spiral stair the happy end is guaranteed: the lovers’ paths meet at the top as well as when they exit the building. Therefore, the stair is also colloquially known as the Busserlstiege (the kissing stair) or the Versöhnungsstiege (reconciliation stair). In our digitally enhanced version, this outcome is no longer clear: we can choose between multiple directions at each level and we risk losing sight of the one we were with. This is also emblematic of our field of research. eCAADe was founded to promote “good practice and sharing information in relation to the use of computers in research and education in architecture and related professions” (see ecaade.org). That may have seemed a straightforward proposition forty years ago, when the association was founded. A look at the breadth and depth of research topics presented and discussed at this conference (and as a consequence in this book, for which you’re reading the editorial) shows how the field has developed over these forty years. There are sessions on Digital Design Education, on Digital Fabrication, on Virtual Reality, on Virtual Heritage, on Generative Design and Machine Learning, on Digital Cities, on Simulation and Digital Twins, on BIM, on Sustainability, on Circular Design, on Design Theory and on Digital Design Experimentations. We hope you will find what you’re looking for in this book and at the conference – and maybe even more than that: surprising turns and happy encounters between Design and the Digital.
series	eCAADe
email
last changed	2023/12/10 10:49

_id	ecaade2023_001
id	ecaade2023_001
authors	Dokonal, Wolfgang, Hirschberg, Urs and Wurzer, Gabriel
year	2023
title	eCAADe 2023 Digital Design Reconsidered - Volume 2
source	Dokonal, W, Hirschberg, U and Wurzer, G (eds.), Digital Design Reconsidered - Proceedings of the 41st Conference on Education and Research in Computer Aided Architectural Design in Europe (eCAADe 2023) - Volume 2, Graz, 20-22 September 2023, 899 p.
doi	https://doi.org/10.52842/conf.ecaade.2023.2.001
summary	The conference logo is a bird’s eye view of spiral stairs that join and separate – an homage to the famous double spiral staircase in Graz, a tourist attraction of this city and a must-see for any architecturally minded visitor. Carved out of limestone, the medieval construction of the original is a daring feat of masonry as well as a symbolic gesture. The design speaks of separation and reconciliation: The paths of two people that climb the double spiral stairs separate and then meet again at each platform. The relationship between architectural design and the growing digital repertoire of tools and possibilities seems to undergo similar cycles of attraction and rejection: enthusiasm about digital innovations – whether in Virtual Reality, Augmented Reality, Energy Design, Robotic Fabrication, the many Dimensions of BIM or, as right now, in AI and Machine Learning – is typically followed by a certain disillusionment and a realization that the promises were somewhat overblown. But a turn away from these digital innovations can only be temporary. In our call for papers we refer to the first and second ‘digital turns’, a term Mario Carpo coined. Yes, it’s a bit of a pun, but you could indeed see these digital turns in our logo as well. Carpo would probably agree that design and the digital have become inseparably intertwined. While they may be circling in different directions, an innovative rejoinder is always just around the corner. The theme of the conference asked participants to re-consider the relationship between Design and the Digital. The notion of a cycle is already present in the syllable “re”. Indeed, 20 years earlier, in 2003, we held an ECAADE conference in Graz simply under the title “Digital Design” and our re-using – or is it re-cycling? – the theme can be seen as the completion of one of those cycles described above: One level up, we meet again, we’ve come full circle. The question of the relationship between Design and the Digital is still in flux, still worthy of renewed consideration. There is a historical notion implicit in the theme. To reconsider something, one needs to take a step back, to look into the past as well as into the future. Indeed, at this conference we wanted to take a longer view, something not done often enough in the fast-paced world of digital technology. Carefully considering one’s past can be a source of inspiration. In fact, the double spiral stair that inspired our conference logo also inspired many architects through the ages. Konrad Wachsmann, for example, is said to have come up with his famous Grapevine assembly system based on this double spiral stair and its intricate joinery. More recently, Rem Koolhaas deemed the double spiral staircase in Graz important enough to include a detailed model of it in his “elements of architecture” exhibition at the Venice Biennale in 2014. Our interpretation of the stair is a typically digital one, you might say. First of all: it’s a rendering of a virtual model; it only exists inside a computer. Secondly, this virtual model isn’t true to the original. Instead, it does what the digital has made so easy to do: it exaggerates. Where the original has just two spiral stairs that separate and join, our model consists of countless stairs that are joined in this way. We see only a part of the model, but the stairs appear to continue in all directions. The implication is of an endless field of spiral stairs. As the 3D model was generated with a parametric script, it would be very easy to change all parameters of it – including the number of stairs that make it up. Everyone at this conference is familiar with the concept of parametric design: it makes generating models of seemingly endless amounts of connected spiral stairs really easy. Although, of course, if we’re too literal about the term ‘endless’, generating our stair model will eventually crash even the most advanced computers. We know that, too. – That's another truth about the Digital: it makes a promise of infinity, which, in the end, it can’t keep. And even if it could: what’s the point of just adding more of the same: more variations, more options, more possible ways to get lost? Doesn’t the original double spiral staircase contain all those derivatives already? Don’t we know that ‘more’ isn’t necessarily better? In the original double spiral stair the happy end is guaranteed: the lovers’ paths meet at the top as well as when they exit the building. Therefore, the stair is also colloquially known as the Busserlstiege (the kissing stair) or the Versöhnungsstiege (reconciliation stair). In our digitally enhanced version, this outcome is no longer clear: we can choose between multiple directions at each level and we risk losing sight of the one we were with. This is also emblematic of our field of research. eCAADe was founded to promote “good practice and sharing information in relation to the use of computers in research and education in architecture and related professions” (see ecaade.org). That may have seemed a straightforward proposition forty years ago, when the association was founded. A look at the breadth and depth of research topics presented and discussed at this conference (and as a consequence in this book, for which you’re reading the editorial) shows how the field has developed over these forty years. There are sessions on Digital Design Education, on Digital Fabrication, on Virtual Reality, on Virtual Heritage, on Generative Design and Machine Learning, on Digital Cities, on Simulation and Digital Twins, on BIM, on Sustainability, on Circular Design, on Design Theory and on Digital Design Experimentations. We hope you will find what you’re looking for in this book and at the conference – and maybe even more than that: surprising turns and happy encounters between Design and the Digital.
series	eCAADe
type	normal paper
email
last changed	2024/08/29 08:36

_id	ecaade03_527_71_donath
id	ecaade03_527_71_donath
authors	Donath, Dirk and Weferling, Ulrich
year	2003
title	Digital building surveying and planning Integrative approaches with commercial object-oriented CAAD systems
source	Digital Design [21th eCAADe Conference Proceedings / ISBN 0-9541183-1-6] Graz (Austria) 17-20 September 2003, pp. 527-532
doi	https://doi.org/10.52842/conf.ecaade.2003.527
summary	As a result of growing activity in the field of renovation and building within existing built contexts, modern digital tools and methods are increasingly in demand. Support of the planning process means: the step-by-step capture of building-relevant information, a rule and parameter-based development of solutions and the combination of traditional and automated methods and technologies used for model creation (building surveying) and model transformation (planning). This article discusses general requirements and the results from our own research and development as well as illustrating how building surveying can already contribute to the planning process more effectively using currently available tools.
keywords	Planning, Building surveying, Process model, CAAD, IT-planning tools, renovation, 3D-model, information systems
series	eCAADe
email
more	http://infar.architektur.uni-weimar.de
last changed	2022/06/07 07:55

_id	ecaade03_665_181_duarte
id	ecaade03_665_181_duarte
authors	Duarte, José P.
year	2003
title	A Discursive Grammar for Customizing Mass Housing - The case of Siza´s houses at Malagueira
source	Digital Design [21th eCAADe Conference Proceedings / ISBN 0-9541183-1-6] Graz (Austria) 17-20 September 2003, pp. 665-674
doi	https://doi.org/10.52842/conf.ecaade.2003.665
summary	The ultimate goal of the described research is a process for mass customizing housing based on computer-aided design and production systems. The current goal is the development of an interactive system for generating solutions on the Web based on a modeling approach called discursive grammar. A discursive grammar consists of a programming grammar and a designing grammar. The programming grammar generates design briefs based on user data; the designing grammar provides the rules for generating designs in a particular style, and a set of heuristics guides the generation of designs towards a solution that matches the design brief. This paper describes the designing grammar using Siza´s houses at Malagueira as a case study.
keywords	Mass customization: housing; grammars; Siza; design automation
series	eCAADe
email
more	http://www.civil.ist.utl.pt/~jduarte/malag/
last changed	2022/06/07 07:55

For more results click below: