Cumincad : CUMINCAD Papers : Search Results

CumInCAD is a Cumulative Index about publications in Computer Aided Architectural Design
supported by the sibling associations ACADIA, CAADRIA, eCAADe, SIGraDi, ASCAAD and CAAD futures

PDF papers
References

Hits 1 to 20 of 561

Reformat results as: short short into frame detailed detailed into frame

_id	cf_2003_000
id	cf_2003_000
authors	Chiu, M.-L., Tsou, J.-Y., Kvan, Th., Morozumi, M. and Jeng, T.-S. (Eds.)
year	2003
title	Digital Design - Research and Practice
source	Proceedings of the 10th International Conference on Computer Aided Architectural Design Futures / ISBN 1-4020-1210-1 / Tainan (Taiwan) 13–15 October 2003, 464 p.
summary	The use of computers in the design of the built environment has reached a watershed. From peripheral devices in the design process, they have in recent years come to take centre stage. An illustration is immediately at hand. Just as the entries to the competition for the Chicago Tribune Tower in 1922 defined the state-of-the-art at the beginning of the twentieth century, we have a similar marker at the end of the century, the competition in 2002 to replace the World Trade Centre towers in Lower Manhattan offered us a range of architectural solutions that exemplified the state-of-the-art eighty years later, setting forth not only architectural statements but also illustrating clearly the importance of computers in the design of the built environment. In these entries of 2002, we can see that computers have not only become essential to the communication of design but in the investigation and generation of structure, form and composition. The papers in this book are the current state-of-the-art in computer-aided design as it stands in 2003. It is the tenth in a series sponsored by the CAAD Futures Foundation, compiled from papers presented at the biennial CAAD Futures Conferences. As a series, the publications have charted the steady progress in developing the theoretical and practical foundations for applications in design practice. This volume continues in that tradition; thus, this book is entitled Digital Design: Research and Practice. The papers are grouped into three major categories, reflecting thrusts of research and practice, namely: Data and information: its organisation, handling and access, including agents; Virtual worlds: their creation, application and interfaces; and Analysis and creation of form and fabric. The editors received 121 abstracts after the initial call for contributions. From these, 61 abstracts were selected for development into complete papers for further review. From these submissions, 39 papers were chosen for inclusion in this publication. These papers show that the field has evolved from theoretical and development concerns to questions of practice in the decade during which this conference has showcased leading work. Questions of theoretical nature remain as the boundaries of our field expand. As design projects have grasped the potentials of computer-aided design, so have they challenged the capabilities of the tools. Papers here address questions in geometric representation and manipulation (Chiu and Chiu; Kocaturk, Veltkamp and Tuncer), topics that may have been considered to be solved. As design practice becomes increasingly knowledge based, better ways of managing, manipulating and accessing the complex wealth of design information becomes more pressing, demanding continuing research in issues such as modelling (Yang; Wang; Zreik et al), data retrieval and querying (Hwang and Choi; Stouffs and Cumming; Zreik, Stouffs, Tuncer, Ozsariyildiz and Beheshti), new modes of perceiving data (Segers; Tan). Tools are needed to manage, mine and create information for creative work, such as agents (Liew and Gero; Smith; Caneparo and Robiglio; Ding et al) or to support design processes (Smith; Chase). Systems for the support and development of designs continue (Gero; Achten and Jessurun). As progress is made on some fronts, such as user interfaces, attention is again turned to previously research areas such as lighting (Jung, Gross and Do; Ng et al; Wittkopf; Chevier; Glaser, Do and Tai) or services (Garcia; Chen and Lin). In recent years the growth of connectivity has led to a rapid growth in collaborative experience and understanding of the opportunities and issues continues to mature (Jabi; Dave; Zamenopoulos and Alexiou). Increasing interest is given to implications in practice and education (Dave; Oxman; Caneparo, Grassi and Giretti). Topics new to this conference are in the area of design to production or manufacture (Fischer, Burry and Frazer; Shih). Three additional invited papers (Rekimoto; Liu; Kalay) provide clear indication that there is still room to develop new spatial concepts and computer augmented environments for design. In conclusion, we note that these papers represent a good record of the current state of the evolving research in the field of digital design.
series	CAAD Futures
email
more	http://www.caadfutures.arch.tue.nl/
last changed	2003/09/22 12:21

_id	caadria2003_c5-1
id	caadria2003_c5-1
authors	Hoon, M. , Jabi, W. and Goldman, G.
year	2003
title	Immersion, Interaction, and Collaboration In Architectural Design Using Gaming Engines
source	CAADRIA 2003 [Proceedings of the 8th International Conference on Computer Aided Architectural Design Research in Asia / ISBN 974-9584-13-9] Bangkok Thailand 18-20 October 2003, pp. 721-738
doi	https://doi.org/10.52842/conf.caadria.2003.721
summary	"This paper investigates the role of gaming engines in the architectural design process through the introduction of features such as immersion, interaction and collaboration. While traditional 3D modelling and visualization systems such as 3D Studio MAX and form?Z offer increasingly convincing visual simulations, gaming engines are approaching the visual realism of such systems and are offering additional interactive features that are usually available only in more expensive immersive virtual reality systems . Additionally, the capability to have multiple individuals inhabit and navigate the space offers unique opportunities for collaboration as well as the investigation of human behaviour. Participants with internet access can be invited to access a shared virtual environment. Collaboration among users can be further enhanced by combining immersive navigation with peer-to-peer instant messaging and/or adding a voice channel. This paper analyzes these issues through research summary and the creation and user testing of a prototype based on a publicly available gaming engine. Through a series of assignments within an academic course, students in the school of architecture were asked to iteratively use and test this prototype for the collaborative exploration of designed environments. Students made their environments available for others to navigate in real-time and offer comments. A final design review was conducted in which critics were asked to enter the designed environment, explore it at will and interact with the student as well as others present in the same virtual space. This paper will illustrate some of the student projects and describe the immersive,"
series	CAADRIA
email
last changed	2022/06/07 07:50

_id	acadia03_001
id	acadia03_001
authors	Jabi, Wassim
year	2003
title	Digital Design
source	Connecting >> Crossroads of Digital Discourse [Proceedings of the 2003 Annual Conference of the Association for Computer Aided Design In Architecture / ISBN 1-880250-12-8] Indianapolis (Indiana) 24-27 October 2003, p. 16
doi	https://doi.org/10.52842/conf.acadia.2003.x.a7r
summary	Describing design as a sequence of steps cannot convey the complexity of social interactions that it embodies. Design is not merely a process, but a co-evolution of efforts and events in various places and times—both synchronous and asynchronous. Designers share their values, effort and expertise within design settings via artifacts that further the design process. Increasingly, these design settings in academia, research, and professional practice combine physical and virtual modalities such as immersion, projection, and a range of interaction technologies. Peter Anders has described such spaces as cybrids: hybrids that integrate virtual and physical space. In these settings, designers use overlapping physical and virtual artifacts and tools to arrive at a co-operative design resolution. Within collaborative design, these artifacts take on an additional role. As embodiments of design ideas and actions, they become media for communication. Donald Schon asserts that design should be considered a form of making, rather than primarily a form of problem solving, information processing or research. Indeed the line separating creation from design is becoming increasingly blurred. For the design artifact itself may become a part of the design proposal—its virtual presence incorporated within a cybrid structure or object. We may in the future see a proliferation of cybrid settings that support collaborative, digital design. The technologies for this already exist in collaborative tools, networked computing, scanning and immersive media. However, it will take a creative vision to see how these disparate tools and devices can integrate within the ideal design setting.
series	ACADIA
email
last changed	2022/06/07 07:49

_id	ecaade03_187_11_brandy
id	ecaade03_187_11_brandy
authors	Brady, Darlene A.
year	2003
title	IDEATION: METAPHORICAL EXPLORATIONS AND DIGITAL MEDIA
source	Digital Design [21th eCAADe Conference Proceedings / ISBN 0-9541183-1-6] Graz (Austria) 17-20 September 2003, pp. 187-190
doi	https://doi.org/10.52842/conf.ecaade.2003.187
summary	Metaphor in architecture involves two distinct paradigms of ideation and visualization: architecture as a virtual metaphor of an idea and virtual models of architecture as metaphors of an architectural intention or vision. Digital media is a powerful vehicle for the generation and expression of both paradigms. The dominant applications of digital media in architecture are drafting and computer simulations as virtual constructs of an architectural intention. This paper will focus on the us e of digital media and ideation, a design process which uses metaphor to link idea and form early in the design process.
keywords	Design creativity, Design process, Generative design, Innovation, Precedents
series	eCAADe
email
more	http://www.archi-textures.com
last changed	2022/06/07 07:54

_id	acadia03_008
id	acadia03_008
authors	Cabrinha, Mark
year	2003
title	Function Follows Form: 10 Sticks (and a Bench)
source	Connecting >> Crossroads of Digital Discourse [Proceedings of the 2003 Annual Conference of the Association for Computer Aided Design In Architecture / ISBN 1-880250-12-8] Indianapolis (Indiana) 24-27 October 2003, pp. 57-65
doi	https://doi.org/10.52842/conf.acadia.2003.057
summary	While the introduction of digital media in the design studio often emphasizes virtual realms, the effect of new fabrication technology on the architect brings the architect back to the realm of master-builder rather than distancing the architect from reality. While purely digital projects have pushed the development of form, they have also placed an emphasis on form over material. However, with the intention to physically build a project, the connections between process, form, and material become intertwined. The inception of this project also served as a clear reminder that the tools we use affect the way we think. This project began as a simple idea: how a column becomes animated to form an arch over time. The digitization of this idea took literally minutes in Maya. It was exported and further modeled in AutoCAD, and then rendered and reanimated in 3D Studio-Viz. This was a very brief, two-week introductory project, in a class on drafting and wood light-frame construction. It served to make a greater connection between digital media, the design process, analog drawing, and the role of craft and material.
series	ACADIA
email
last changed	2022/06/07 07:54

_id	cf2003_m_098
id	cf2003_m_098
authors	CHAMPION, E., DAVE, B. and BISHOP, I.
year	2003
title	Interaction, Agency and Artefacts
source	Digital Design - Research and Practice [Proceedings of the 10th International Conference on Computer Aided Architectural Design Futures / ISBN 1-4020-1210-1] Tainan (Taiwan) 13–15 October 2003, pp. 249-258
summary	This paper argues (i) that understanding of a place (especially in heritage environments) requires a level of cultural engagement and (ii) that virtual environments, in their typical current form, fail to provide such engagement. A proposed solution to the issue of cultural presence is to apply the interactive mechanisms commonly used in computer games (social agents, levels of interaction constraint, and task-based manipulation of artefacts) to virtual heritage environments. The hypothesis is that the resulting environment will allow for greater engagement and a more culturally immersive learning environment. Virtual environments also often lack techniques for evaluating the extent to which their design goals are achieved. A proposed secondary outcome is that designers and researchers of virtual environment can also use the above interactive mechanisms for the evaluation of user engagement without simultaneously interrupting the user’s feeling of engagement.
keywords	engagement, evaluation, games, HCI, virtual heritage, virtual world
series	CAAD Futures
email
last changed	2003/09/22 12:21

_id	sigradi2003_103
id	sigradi2003_103
authors	Desumvila, Gladis
year	2003
title	Con ese palpitar... corazón real - corazón virtual (With that beat... real heart - virtual heart)
source	SIGraDi 2003 - [Proceedings of the 7th Iberoamerican Congress of Digital Graphics] Rosario Argentina 5-7 november 2003
summary	In my production I seek to unite the diverse both in its form and in its essence: the poetic and the rational, the organic matter and technology, the ancestral and the current. Dialectical pairs that continually play at seducing each other, maintaining their symbolic balance. My artistic searches come back from every corner to the traces of feelings and senses. "With that beating...", operates on an ancestral, symbolic and ritual space which every age updates with its own view. It dwells in irony, where the heart is the emblem of grief, desire and seduction.
keywords	real Herat, virtual heart
series	SIGRADI
email
last changed	2016/03/10 09:50

_id	acadia03_006
id	acadia03_006
authors	Dobson, Adrian and Lancaric, Peter
year	2003
title	VIRTUreALITY Digital Urban Modelling as a Community Design Form
source	Connecting >> Crossroads of Digital Discourse [Proceedings of the 2003 Annual Conference of the Association for Computer Aided Design In Architecture / ISBN 1-880250-12-8] Indianapolis (Indiana) 24-27 October 2003, pp. 49-53
doi	https://doi.org/10.52842/conf.acadia.2003.049
summary	This paper describes a practice-led research project that investigates the application of digital modelling and communication technologies in urban and architectural design. The project is being carried out by our team with the collaboration of the architecture and planning departments at local borough council and local community participation. The main methodology for the project revolves around the evolution of an interactive three-dimensional digital urban model, which incorporates a variety of visual, graphic and numeric data. This digital model is utilised within a web site to help facilitate a participatory approach to the physical and social regeneration of an inner urban zone, in terms of both the built environment and the attempted creation of a virtual community.
series	ACADIA
last changed	2022/06/07 07:55

_id	sigradi2003_091
id	sigradi2003_091
authors	Engeli, Maia
year	2003
title	Reflection and Expression in an Ego-Shooter Environment
source	SIGraDi 2003 - [Proceedings of the 7th Iberoamerican Congress of Digital Graphics] Rosario Argentina 5-7 november 2003
summary	This paper is about editing ego-shooter games to elaborate and express ideas by means of virtual spaces. Egoshooter games were chosen because they are a popular media and offer different possibilities for their alteration. The interesting and most challenging aspect is the search for new kinds of designs for the dynamic virtual space of the game environments. Examples from art and workshops with architecture students illustrate these explorations.
keywords	Computer Games, Virtual Reality, Virtual Architecture, Digital Messages.
series	SIGRADI
email
last changed	2016/03/10 09:51

_id	sigradi2003_113
id	sigradi2003_113
authors	Gallo, Marisa
year	2003
title	Uno
source	SIGraDi 2003 - [Proceedings of the 7th Iberoamerican Congress of Digital Graphics] Rosario Argentina 5-7 november 2003
summary	The technological tools applied to the field of the art allow me to fulfill the projects and searches that were formulated by the historical vanguard: to materialize the simulation of movement, of the virtual, of the simultaneous, of the permanently mutant thing. And also to sustain the values of contemporary art as well as to operate from a notorious devaluation of the referent and, at the same time, with a limitless mimetic freedom to accentuate the crossing of opposite disciplines, which was previously defined by collages, assemblages, photomontages. In this way, I redefine these crossings from images where the certainties on the real thing/that represented/that done/that simulated disappear.
series	SIGRADI
email
last changed	2016/03/10 09:52

_id	diss_2003
id	diss_2003
authors	Gorczyca, Adam
year	2003
title	Interaction of the design methods and the contemporary computer techniques
source	Faculty of Architecture, Warsaw University of Technology
summary	The thesis researches a bilateral relations between computer techniques and methods of architectural design. It represents a holistic attitude because of a multithread analysis in the field of the theory of design, a new hard- and software used by architects, and a design practice. Thesis: Contemporary computer science development at the end of the twentieth century pushed architects to use hard- and software as tools, which became an active support (more than just CAAD). It enabled to widen the scope of a form-properties research and a generation of solutions impossible to achieve before, by using traditional methods and tools. This situation leads to new, unpredictable possibilities of architectural research and design. Objectives: 1. Definition of the latest trends in computer technologies applied in architectural offices. 2. Presentation of some practical consequencies of application of those technologies in design and construction. 3. Separation of new design methods caused by use of digital tools. 4. A simplified taxonomy of the methods above, with characteristic features. 5. A research in practical application of digital tools in Polish and foreign offices, as well as at the WUT Faculty of Architecture. The subject of the work: The thesis constitutes of five chapters. The first chapter is an introduction, where the range of work is presented in the context of place, time and the research made. The following chapters research three aspects of CAAD: (1) hardware and software, (2) new definition of architecture, which is a result of application of the digital tools, (3) practical problems connected with the use of computer techniques. The second chapter describes the new technologies in use –Virtual Reality (incl. VRD, CAVE’s, Data Gloves, motion-capture), Rapid prototyping (incl. holographic printers, 3D scanners, routers, milling-machines), new types of interfaces (e.g. xWorlds, InfoSpace, Flock of birds), etc. The third chapter is a theoretical one. It presents three types of changes in design methods, which can be classified, judging by results, in architecture of: (a) in-formation (b) de-formation and (c) cyberspace. All the mentioned applications of a digital technology cause redefinition of the range of the architects’ profession. The fourth chapter is concentrated on the application and utilization of technology. It is a detailed analysis of chosen buildings (characteristic examples) and design methods used by some avant-garde and well-known practitioners and visioners of architecture (Eisenman, Gehry, Spuybroek, etc.). It also presents statistics, where the influence of digital tools on the way of working (efficiency, productivity, use of tools) is expressed numerically. A synthesis summarizes the relation between architects and the new digital tools in some aspects: hard- and software, social changes, ergonomics, methodics, linguistic/symbolic and architectural. The mentioned ranges of interaction constitute the proof of the thesis.
series	thesis:PhD
email
last changed	2003/09/17 18:20

_id	ijac20031105
id	ijac20031105
authors	Kieferle, Joachim B.; Herzberger, Erwin
year	2003
title	The "Digital year for Architects" - Experiences with an Integrated Teaching Concept
source	International Journal of Architectural Computing vol. 1 - no. 1
summary	The "digital year for architects" is an integrated course for graduate architecture students that has been running since 1997, at Stuttgart University. Its concept is to link together traditional design teaching and working with computers. Three seminar classes and one design project form the framework of the course. In it the students are taught the design of, for example, image and space composition, typography, video, and using virtual reality. Additionally we cover theoretical basics for the final design project, such as information management or working environments. The course takes in approximately a dozen software packages and ends with a visionary design project. The products have shown the advantage of an integrated course compared to separate courses. The course proves to be more intensive in dealing with the project as well as achieving better skills when learning the associated new digital media. An important feature is that because the project topics are different from conventional architectural schemes, and tend to be more abstract, a key effect is to widen the students' way of thinking about designing.
series	journal
email
more	http://www.multi-science.co.uk/ijac.htm
last changed	2007/03/04 07:08

_id	ecaade03_037_79_lang
id	ecaade03_037_79_lang
authors	Lang, Silke and Hovestadt, Ludger
year	2003
title	An architectural framework within a spatially immersive real-time environment for advanced communication and collaboration
source	Digital Design [21th eCAADe Conference Proceedings / ISBN 0-9541183-1-6] Graz (Austria) 17-20 September 2003, pp. 37-43
doi	https://doi.org/10.52842/conf.ecaade.2003.037
summary	In this paper we present a framework for use in the blue-c, a collaborative telepresence environment. We implemented the framework on top of the blue-c API to enable new ways of designing digital 3D spaces in an immersive way. The framework will be used to support designers in creating spatial scenarios within CAVETM – like environments. It concentrates on the integration aspect of different media and data types. Architectural knowledge and information technology is combined to introduce a new approach for designing virtual environments.
keywords	Virtual Reality; Tele-Immersion; Collaborative Environment; 3D Video;Human-Computer Interaction
series	eCAADe
email
more	http://www.caad.arch.ethz.ch
last changed	2022/06/07 07:52

_id	ijac20031109
id	ijac20031109
authors	Liu, Yu-Tung; Shen-Kai, Tang
year	2003
title	Space, Place and Digital Media:Towards a Better Simulation of a City that has now Disappeared
source	International Journal of Architectural Computing vol. 1 - no. 1
summary	Digital media enable researchers and designers to derive better informed processes in solving problems of historical architectural restoration and virtual archaeology. However, recently insufficiencies have been found in the main technologies often applied in such techniques, such as 3D modeling, high-quality rendering and animation. Given these problems, this paper attempts to explore a digital reconstruction procedure for historical architecture and cities using 3D scanning, Virtual Reality cave technology and motion capture technology. This case study is based on a collaborative project in conjunction with the National Palace Museum, Taiwan, and the China Times, Taiwan.The five steps involved in this project include data collection and analysis, three-dimensional digital inferences, digital reconstruction of static and moving models, scenario dynamics (by integrating the two kinds of models), and visual-spatial immersion using a VR-cave representation. Finally, a preliminary digital reconstruction procedure is presented.
series	journal
email
more	http://www.multi-science.co.uk/ijac.htm
last changed	2007/03/04 07:08

_id	sigradi2003_055
id	sigradi2003_055
authors	Llavaneras, Gustavo J.
year	2003
title	Arquitectura virtual como proyecto de titulación: Una experiencia completa (Virtual Architecture as a Graduating Project: A complete experience)
source	SIGraDi 2003 - [Proceedings of the 7th Iberoamerican Congress of Digital Graphics] Rosario Argentina 5-7 november 2003
summary	In this paper we define what we understand as Titulation Project, study the various ways to attack such a project in the area of Computer Graphics Applied to Architecture, describing the experience we did with a group of students who worked on their Titulation Project in this area. Three different designs for The Virtual Center for Venezuelan Digital Art are presented as a result of this experience, as well as conclussions on the whole two-semesters experience.
series	SIGRADI
email
last changed	2016/03/10 09:55

_id	ecaade03_047_70_maher
id	ecaade03_047_70_maher
authors	Maher, M.L., Liew, P.-S., Gu, N. and Ding, L.
year	2003
title	An Agent Approach to Supporting Collaborative Design in 3D Virtual Worlds
source	Digital Design [21th eCAADe Conference Proceedings / ISBN 0-9541183-1-6] Graz (Austria) 17-20 September 2003, pp. 47-52
doi	https://doi.org/10.52842/conf.ecaade.2003.047
summary	3D Virtual worlds facilitate a level of communication and collaboration not readily available in conventional CAD systems. The integration of virtual worlds and CAD systems using a common data model can make a significant impact on synchronous collaboration and real time multi-user multi-disciplinary modification of building data. By using agents, the integration of 3D virtual worlds and CAD systems can go beyond that of passive data transfer. With sensors and effectors, each agent can interact with its environment by responding to changes in the CAD system or 3D virtual world, which can take the form of an update to the geometry, or as a recommendation to change non geometric information or to propagate changes to other parts of the design. The reasoning process for each agent can vary from a reflexive behaviour in which the agent responds directly to the sensor data to a reflective behaviour in which the agents reasons about its goals and alternatives before making a change to the environment. We demonstrate this approach using ArchiCAD and Active Worlds as the CAD system and the virtual world platform. An EDM database is used as the central repository for storing the representation of the relevant data model. A multi-agent system is developed to connect the virtual world to this database to allow active data sharing. This agent approach can be extended to the integration of other applications and data models.
keywords	Design Collaboration, Virtual World, Agent and CAD
series	eCAADe
email
more	http://www.arch.usyd.edu.au/~mary
last changed	2022/06/07 07:59

_id	acadia03_064
id	acadia03_064
authors	Malnar, Joy Monice (et al.)
year	2003
title	Make No Little Plans: Designing the Chicago Lakefront in a Virtual Reality Environment
source	Connecting >> Crossroads of Digital Discourse [Proceedings of the 2003 Annual Conference of the Association for Computer Aided Design In Architecture / ISBN 1-880250-12-8] Indianapolis (Indiana) 24-27 October 2003, p. 436
doi	https://doi.org/10.52842/conf.acadia.2003.x.d1u
summary	Architects have always needed somewhere to draw. History has seen dirt, stone, wood, and paper each serve in turn as the architect’s medium. Every technological advance has helped to manifest these exploratory visions in ever-increasing fidelity, while influencing the way in which the design process is conducted. Computer technology is the latest step in this progression, adding a third dimension to the architect’s drawings. Programs like form•Z, 3DS max, etc. allow the architect to build lifelike models and take clients on fly-throughs. Now, virtual reality has advanced architectural drawing to “full body design”, letting architects experience their creations, rather than just seeing those creations in front of them. ShadowLight-Mirage offers a unique environment in virtual reality in which to create rich ambiances of vibrancy, vitality and vigor.
series	ACADIA
last changed	2022/06/07 07:49

_id	ecaade03_229_40_monedero
id	ecaade03_229_40_monedero
authors	Monedero, Javier and Muñoz, Francisco
year	2003
title	Data Organization in City Modeling
source	Digital Design [21th eCAADe Conference Proceedings / ISBN 0-9541183-1-6] Graz (Austria) 17-20 September 2003, pp. 229-236
doi	https://doi.org/10.52842/conf.ecaade.2003.229
summary	Working with big models requires a good balance between the technical requirements of the model and the technical requirements of the user. Although every virtual model, whether it is 2d, 3d or 4d, may be regarded as a particular form of a general data base, it is clear that is not, at the present time, a very flexible data base. It does not behave like a relational data base that can be inspected in a flexible way. On the contrary, it has a rigid structure, a hierarchical structure that is well suited for performance but is badly suited for navigating through the data and gathering derived information. These are well known disadvantages and advantages, related to the evolution of the data base software that has moved, in the last 30 years, from a hierarchical to a relational structure. These considerations are relevant for any kind of architectural or engineering model. But are particularly pertinent in the case of the model of a city where everything must have its place, and should relate properly with other parts of the model, be susceptible of further modifications and be able to receive new information. These and other related issues have been encountered and developed during the construction of several models at our Laboratory at the ETS Architecture of Barcelona. Our paper explains the main decisions we had to take during the course of these works with special emphasis on those aspects related with the organization of different kind of data in a unified whole that had to be sent to other professionals and had to be, for that reason, organized in a clear and comprehensible way for its further development.
keywords	CAAD; City Modeling; Visual Simulation
series	eCAADe
email
last changed	2022/06/07 07:58

_id	ecaade03_165_201_oxman
id	ecaade03_165_201_oxman
authors	Oxman, Rivka
year	2003
title	Being There: Architectural Metaphors in the Design of Virtual Place
source	Digital Design [21th eCAADe Conference Proceedings / ISBN 0-9541183-1-6] Graz (Austria) 17-20 September 2003, pp. 165-168
doi	https://doi.org/10.52842/conf.ecaade.2003.165
summary	The paper reports on a research program to define the issues and strategies involved in the design of virtual architecture. Issues and categories of virtual architecture are identified and classified. An approach to the design of virtual place is derived from a large body of emerging literature as well as from the analysis of case-studies. We demonstrate and discuss how paradigms of physical design may be applied to support the needs of design for cyber-place. We attempt to define intrinsically digital possibilities for interface design that are not based upon a direct analogy to physical space. The findings in the form of alternative development possibilities and design guidelines may provide a guide to the field of virtual architecture, to its definition, design issues, and potential strategies.
keywords	Cyberspace, cyber-place, virtual architecture
series	eCAADe
email
more	http://www.technion.ac.il/~oxman
last changed	2022/06/07 08:00

_id	sigradi2003_095
id	sigradi2003_095
authors	Petric, Jelena and Maver, Tom
year	2003
title	Digital Prototyping in the Architectural Design Studio
source	SIGraDi 2003 - [Proceedings of the 7th Iberoamerican Congress of Digital Graphics] Rosario Argentina 5-7 november 2003
summary	This paper describes the inter-related use of three digital prototyping technologies by undergraduate students in the Department of Architecture and Building Science at the University of Strathclyde. These are: virtual reality computer graphics (CG), rapid manufacture (RM) of physical scale models from digital data, and acquisition of digital data relating to the shape of a physical object by some form of laser scanning (LS). The paper describes two experiments - one relating to housing, the other to a transport museum - to determine how seamlessly, accurately and usefully the (student) architect can move from one technology to another in the course of design.
keywords	Computer graphics, rapid manufacture, laser scanning
series	SIGRADI
email
last changed	2016/03/10 09:57

For more results click below: