Cumincad : CUMINCAD Papers : Search Results

CumInCAD is a Cumulative Index about publications in Computer Aided Architectural Design
supported by the sibling associations ACADIA, CAADRIA, eCAADe, SIGraDi, ASCAAD and CAAD futures

PDF papers
References

Hits 1 to 20 of 605

Reformat results as: short short into frame detailed detailed into frame

_id	4c01
authors	Laranjeira, Teresa
year	2003
title	The S. Pedro da Cova Community Knowledge Centre, a local example of empowerment through technology
source	CORP 2003, Vienna University of Technology, 25.2.-28.2.2003 [Proceedings on CD-Rom]
summary	S. Pedro da Cova (Gondomar), located ten kilometres from the city centre of Porto (Portugal), is considerate a depressed territory, with a large spectrum of social, economic and urban problems, but also with local positive aspects capable to reach the different development opportunities.In the ambit of the regeneration process for this area, the local authority draw a strategy based in the empowerment of the citizens, where the Information Communication Technologies (ICT’s) assumed a major role. With this purpose, it was intended to build a Community Technology Centre for the disfavoured children. From the building construction till the first activities, it is our conviction that to break the differences between the have and the have not’s it will be very important to conciliate the new technologies and the local characteristics. The children will be the active agents in the dissemination of the project through the development of the different activities, sensitising the families to adopt a healthy life and announce situations of risk, for example. To validate the project will be created an permanent observatory that propose a moment of reflection and auto-valuation about the evolution of the different activities, thechanges to do, and the identification of new problems and the redefinition of new methodologies. The aim of the article is not only to show the positive aspects, indeed significant, but also to bring into discussion some questions; in order to understand the possibility of defining an empowerment strategy based in the ICT’s. How to conciliate the individualperspectives of the future into a common objective? How to show to all community that information and knowledge are fundamentalto build a more liveable and equity neighbourhood? How to transfer the results to a larger strategy for the entire city? And, at theend, how to explain that people is the most important "infrastructure" to build a better future?
keywords	Social Exclusion; Informal Urban Structure; Empowerment; Spaces of Knowledge
series	other
email
last changed	2003/03/11 20:39

_id	ecaade03_229_40_monedero
id	ecaade03_229_40_monedero
authors	Monedero, Javier and Muñoz, Francisco
year	2003
title	Data Organization in City Modeling
source	Digital Design [21th eCAADe Conference Proceedings / ISBN 0-9541183-1-6] Graz (Austria) 17-20 September 2003, pp. 229-236
doi	https://doi.org/10.52842/conf.ecaade.2003.229
summary	Working with big models requires a good balance between the technical requirements of the model and the technical requirements of the user. Although every virtual model, whether it is 2d, 3d or 4d, may be regarded as a particular form of a general data base, it is clear that is not, at the present time, a very flexible data base. It does not behave like a relational data base that can be inspected in a flexible way. On the contrary, it has a rigid structure, a hierarchical structure that is well suited for performance but is badly suited for navigating through the data and gathering derived information. These are well known disadvantages and advantages, related to the evolution of the data base software that has moved, in the last 30 years, from a hierarchical to a relational structure. These considerations are relevant for any kind of architectural or engineering model. But are particularly pertinent in the case of the model of a city where everything must have its place, and should relate properly with other parts of the model, be susceptible of further modifications and be able to receive new information. These and other related issues have been encountered and developed during the construction of several models at our Laboratory at the ETS Architecture of Barcelona. Our paper explains the main decisions we had to take during the course of these works with special emphasis on those aspects related with the organization of different kind of data in a unified whole that had to be sent to other professionals and had to be, for that reason, organized in a clear and comprehensible way for its further development.
keywords	CAAD; City Modeling; Visual Simulation
series	eCAADe
email
last changed	2022/06/07 07:58

_id	cf2011_p157
id	cf2011_p157
authors	Boton, Conrad; Kubicki Sylvain, Halin Gilles
year	2011
title	Understanding Pre-Construction Simulation Activities to Adapt Visualization in 4D CAD Collaborative Tools
source	Computer Aided Architectural Design Futures 2011 [Proceedings of the 14th International Conference on Computer Aided Architectural Design Futures / ISBN 9782874561429] Liege (Belgium) 4-8 July 2011, pp. 477-492.
summary	Increasing productivity and efficiency is an important issue in the AEC field. This area is mainly characterized by fragmentation, heterogeneous teams with low lifetimes and many uncertainties. 4D CAD is one of the greatest innovations in recent years. It consists in linking a 3D model of the building with the works planning in order to simulate the construction evolution over time. 4D CAD can fill several needs from design to project management through constructivity analysis and tasks planning (Tommelein 2003). The literature shows that several applications have been proposed to improve the 4D CAD use (Chau et al. 2004; Lu et al. 2007; Seok & al. 2009). In addition, studies have shown the real impact of 4D CAD use in construction projects (Staub-French & Khanzode 2007; Dawood & Sika 2007). More recently, Mahalingam et al. (2010) showed that the collaborative use of 4D CAD is particularly useful during the pre-construction phase for comparing the constructability of working methods, for visually identifying conflicts and clashes (overlaps), and as visual tool for practitioners to discuss and to plan project progress. So the advantage of the 4D CAD collaborative use is demonstrated. Moreover, several studies have been conducted both in the scientific community and in the industrial world to improve it (Zhou et al. 2009; Kang et al. 2007). But an important need that remains in collaborative 4D CAD use in construction projects is about the adaptation of visualization to the users business needs. Indeed, construction projects have very specific characteristics (fragmentation, variable team, different roles from one project to another). Moreover, in the AEC field several visualization techniques can represent the same concept and actors choose one or another of these techniques according to their specific needs related to the task they have to perform. For example, the tasks planning may be represented by a Gantt chart or by a PERT network and the building elements can be depicted with a 3D model or a 2D plan. The classical view (3D + Gantt) proposed to all practitioners in the available 4D tools seems therefore not suiting the needs of all. So, our research is based on the hypothesis that adapting the visualization to individual business needs could significantly improve the collaboration. This work relies on previous ones and aim to develop a method 1) to choose the best suited views for performed tasks and 2) to compose adapted multiple views for each actor, that we call ‚Äúbusiness views‚Äù. We propose a 4 steps-method to compose business views. The first step identifies the users‚Äô business needs, defining the individual practices performed by each actor, identifying his business tasks and his information needs. The second step identifies the visualization needs related to the identified business needs. For this purpose, the user‚Äôs interactions and visualization tasks are described. This enables choosing the most appropriate visualization techniques for each need (step 3). At this step, it is important to describe the visualization techniques and to be able to compare them. Therefore, we proposed a business view metamodel. The final step (step 4) selects the adapted views, defines the coordination mechanisms and the interaction principles in order to compose coordinated visualizations. A final step consists in a validation work to ensure that the composed views really match to the described business needs. This paper presents the latest version of the method and especially presents our latest works about its first and second steps. These include making more generic the business tasks description in order to be applicable within most of construction projects and enabling to make correspondence with visualization tasks.
keywords	Pre-construction, Simulation, 4D CAD, Collaboration, Computer Supported Cooperative Work, Human-Computer Interface, Information visualization, Business view, Model driven engineering
series	CAAD Futures
email
last changed	2012/02/11 19:21

_id	cf2003_m_105
id	cf2003_m_105
authors	CHASE, Scott C.
year	2003
title	A Prototype Generative System for Construction Details Combining FBS Descriptions with Design Grammars
source	Digital Design - Research and Practice [Proceedings of the 10th International Conference on Computer Aided Architectural Design Futures / ISBN 1-4020-1210-1] Tainan (Taiwan) 13–15 October 2003, pp. 413-422
summary	A formal framework for redesign based upon Function-Behaviour-Structure models and design grammars is described. A proposed application domain is for the design and redesign of construction assemblies. GDL object technology is illustrated as a candidate tool for implementation.
keywords	construction, grammar, geometric description, redesign
series	CAAD Futures
email
last changed	2003/09/22 12:21

_id	adae
id	adae
authors	Cheng, Nancy Yen-wen
year	2003
title	Approaches to Design Collaboration Research
source	Automation in Construction Volume 12, Issue 6, November 2003, Pages 715-723
summary	This survey of architectural design collaboration identifies and categorizes strong research from the past ten years. It starts by describing how the research ranges in focus, scale and structure, then clarifies how different projects fit in a continuum from conceptual theory to pragmatic application. It explains how conceptual frameworks and standards enable interdisciplinary exchange by envisioning and structuring interaction. It then highlights specific interaction studies and compares methods for analyzing how media affects teamwork. The paper continues by explaining the promise of innovations such as tangible interfaces and interactive artwork, and concludes by identifying areas for further development.
keywords	design collaboration, groupwork, computer-supported cooperative design, human-computer interaction
series	journal paper
type	normal paper
email
last changed	2007/12/14 19:54

_id	caadria2006_597
id	caadria2006_597
authors	CHOR-KHENG LIM, CHING-SHUN TANG, WEI-YEN HSAO, JUNE-HAO HOU, YU-TUNG LIU
year	2006
title	NEW MEDIA IN DIGITAL DESIGN PROCESS: Towards a standardize procedure of CAD/CAM fabrication
source	CAADRIA 2006 [Proceedings of the 11th International Conference on Computer Aided Architectural Design Research in Asia] Kumamoto (Japan) March 30th - April 2nd 2006, 597-599
doi	https://doi.org/10.52842/conf.caadria.2006.x.r4i
summary	In 1990, due to the traditional architecture design and construction method difficult to build the complicated and non-geometry free-form Fish Structure in Barcelona, architect Frank Gehry started learn from the field of aerospace to utilize CAD/CAM technology in design and manufacture process. He created the free-form fish model in CAD system and exported the digital CAD model data to CAM machine (RP and CNC) to fabricate the design components, and finally assembled on the site. Gehry pioneered in the new digital design process in using CAD/CAM technology or so-called digital fabrication. It becomes an important issue recently as the CAD/CAM technology progressively act as the new digital design media in architectural design and construction process (Ryder et al., 2002; Kolarevic, 2003). Furthermore, in the field of architecture professional, some commercial computer systems had been developed on purpose of standardizes the digital design process in using CAD/CAM fabrication such as Gehry Technologies formed by Gehry Partners; SmartGeometry Group in Europe and Objectile proposed by Bernard Cache. Researchers in the research field like Mark Burry, Larry Sass, Branko Kolarevic, Schodek and others are enthusiastic about the exploration of the role of CAD/CAM fabrication as new design media in design process (Burry, 2002; Schodek et al., 2005; Lee, 2005).
series	CAADRIA
email
last changed	2022/06/07 07:50

_id	sigradi2004_110
id	sigradi2004_110
authors	Eliane Schlemmer; Luciana Backes; Aline Andrioli; Carine Barcellos Duarte
year	2004
title	Awsinos: Construção de um mundo virtual [Awsinos: Construction of a Virtual World]
source	SIGraDi 2004 - [Proceedings of the 8th Iberoamerican Congress of Digital Graphics] Porte Alegre - Brasil 10-12 november 2004
summary	The course Alternatives of Design is part of an integral viewpoint that aims to prepare architects from the Master Studies Department in Computing in Architecture (LUZ), in two ways: first, by expanding their perspective about potentialities of using new digital technologies in architecture, and second, by qualifying them to apply this acquired theoretical knowledge in their professional environment. The objectives of this paper are to describe the program of this course and to show products (2003), from the introductory to the final presentation of Virtual Museums of Interactive Sculptures, orientated and supervised both at site and at a distance through the Internet. As a result of this experience, a sample was obtained of virtual museums. design and modelling that illustrates what could be understood as virtual architecture with high degree of interaction, looking for the evolution, motivation and teamwork to incorporate virtual reality non-inmersive technologies in this new architectonic approach.
keywords	VRML, virtual museums, interactive sculptures, alternatives of design
series	SIGRADI
email
last changed	2016/03/10 09:51

_id	sigradi2006_e028c
id	sigradi2006_e028c
authors	Griffith, Kenfield; Sass, Larry and Michaud, Dennis
year	2006
title	A strategy for complex-curved building design:Design structure with Bi-lateral contouring as integrally connected ribs
source	SIGraDi 2006 - [Proceedings of the 10th Iberoamerican Congress of Digital Graphics] Santiago de Chile - Chile 21-23 November 2006, pp. 465-469
summary	Shapes in designs created by architects such as Gehry Partners (Shelden, 2002), Foster and Partners, and Kohn Peterson and Fox rely on computational processes for rationalizing complex geometry for building construction. Rationalization is the reduction of a complete geometric shape into discrete components. Unfortunately, for many architects the rationalization is limited reducing solid models to surfaces or data on spread sheets for contractors to follow. Rationalized models produced by the firms listed above do not offer strategies for construction or digital fabrication. For the physical production of CAD description an alternative to the rationalized description is needed. This paper examines the coupling of digital rationalization and digital fabrication with physical mockups (Rich, 1989). Our aim is to explore complex relationships found in early and mid stage design phases when digital fabrication is used to produce design outcomes. Results of our investigation will aid architects and engineers in addressing the complications found in the translation of design models embedded with precision to constructible geometries. We present an algorithmically based approach to design rationalization that supports physical production as well as surface production of desktop models. Our approach is an alternative to conventional rapid prototyping that builds objects by assembly of laterally sliced contours from a solid model. We explored an improved product description for rapid manufacture as bilateral contouring for structure and panelling for strength (Kolarevic, 2003). Infrastructure typically found within aerospace, automotive, and shipbuilding industries, bilateral contouring is an organized matrix of horizontal and vertical interlocking ribs evenly distributed along a surface. These structures are monocoque and semi-monocoque assemblies composed of structural ribs and skinning attached by rivets and adhesives. Alternative, bi-lateral contouring discussed is an interlocking matrix of plywood strips having integral joinery for assembly. Unlike traditional methods of building representations through malleable materials for creating tangible objects (Friedman, 2002), this approach constructs with the implication for building life-size solutions. Three algorithms are presented as examples of rationalized design production with physical results. The first algorithm [Figure 1] deconstructs an initial 2D curved form into ribbed slices to be assembled through integral connections constructed as part of the rib solution. The second algorithm [Figure 2] deconstructs curved forms of greater complexity. The algorithm walks along the surface extracting surface information along horizontal and vertical axes saving surface information resulting in a ribbed structure of slight double curvature. The final algorithm [Figure 3] is expressed as plug-in software for Rhino that deconstructs a design to components for assembly as rib structures. The plug-in also translates geometries to a flatten position for 2D fabrication. The software demonstrates the full scope of the research exploration. Studies published by Dodgson argued that innovation technology (IvT) (Dodgson, Gann, Salter, 2004) helped in solving projects like the Guggenheim in Bilbao, the leaning Tower of Pisa in Italy, and the Millennium Bridge in London. Similarly, the method discussed in this paper will aid in solving physical production problems with complex building forms. References Bentley, P.J. (Ed.). Evolutionary Design by Computers. Morgan Kaufman Publishers Inc. San Francisco, CA, 1-73 Celani, G, (2004) “From simple to complex: using AutoCAD to build generative design systems” in: L. Caldas and J. Duarte (org.) Implementations issues in generative design systems. First Intl. Conference on Design Computing and Cognition, July 2004 Dodgson M, Gann D.M., Salter A, (2004), “Impact of Innovation Technology on Engineering Problem Solving: Lessons from High Profile Public Projects,” Industrial Dynamics, Innovation and Development, 2004 Dristas, (2004) “Design Operators.” Thesis. Massachusetts Institute of Technology, Cambridge, MA, 2004 Friedman, M, (2002), Gehry Talks: Architecture + Practice, Universe Publishing, New York, NY, 2002 Kolarevic, B, (2003), Architecture in the Digital Age: Design and Manufacturing, Spon Press, London, UK, 2003 Opas J, Bochnick H, Tuomi J, (1994), “Manufacturability Analysis as a Part of CAD/CAM Integration”, Intelligent Systems in Design and Manufacturing, 261-292 Rudolph S, Alber R, (2002), “An Evolutionary Approach to the Inverse Problem in Rule-Based Design Representations”, Artificial Intelligence in Design ’02, 329-350 Rich M, (1989), Digital Mockup, American Institute of Aeronautics and Astronautics, Reston, VA, 1989 Schön, D., The Reflective Practitioner: How Professional Think in Action. Basic Books. 1983 Shelden, D, (2003), “Digital Surface Representation and the Constructability of Gehry’s Architecture.” Diss. Massachusetts Institute of Technology, Cambridge, MA, 2003 Smithers T, Conkie A, Doheny J, Logan B, Millington K, (1989), “Design as Intelligent Behaviour: An AI in Design Thesis Programme”, Artificial Intelligence in Design, 293-334 Smithers T, (2002), “Synthesis in Designing”, Artificial Intelligence in Design ’02, 3-24 Stiny, G, (1977), “Ice-ray: a note on the generation of Chinese lattice designs” Environmental and Planning B, volume 4, pp. 89-98
keywords	Digital fabrication; bilateral contouring; integral connection; complex-curve
series	SIGRADI
email
last changed	2016/03/10 09:52

_id	caadria2003_b6-1
id	caadria2003_b6-1
authors	Howe, A.S., Kang, P. and Nasari, Omid
year	2003
title	Digiosk Digital Design to Robotic Deployment in Two Months
source	CAADRIA 2003 [Proceedings of the 8th International Conference on Computer Aided Architectural Design Research in Asia / ISBN 974-9584-13-9] Bangkok Thailand 18-20 October 2003, pp. 811-826
doi	https://doi.org/10.52842/conf.caadria.2003.811
summary	In this paper, we discuss Kit-of-parts Theory and how it applies to the design, manufacture, and operation of a small robotic deployable demonstration structure called the Digiosk (Howe, 2001). "Kit-of-parts Theory" refers to the study and application of objectoriented building techniques, where building components are predesigned / pre-engineered / pre-fabricated for inclusion in joint-based (linear element), panel-based (planar element), module-based (solid element), and deployable (time element) construction systems. The Digiosk is an exposition display kiosk that was designed and manufactured digitally, and brought from concept to robotic functionality in a short period of time. Using kinematic mechanisms the cylinder opens up and deploys into a 2.7m cubical display booth complete with integral power and network connections. The kiosk was designed using a solid modeler, from which data was extracted to drive digital manufacturing processes. Owing to the well-developed understanding of Kit-of-parts Theory and the new "kinematic architecture" principles, the paperless process yielded a working prototype only eight weeks after initial conceptualization. The paper concludes with a discussion of how these concepts can be applied to large-scale projects and design processes.
series	CAADRIA
email
last changed	2022/06/07 07:50

_id	acadia03_001
id	acadia03_001
authors	Jabi, Wassim
year	2003
title	Digital Design
source	Connecting >> Crossroads of Digital Discourse [Proceedings of the 2003 Annual Conference of the Association for Computer Aided Design In Architecture / ISBN 1-880250-12-8] Indianapolis (Indiana) 24-27 October 2003, p. 16
doi	https://doi.org/10.52842/conf.acadia.2003.x.a7r
summary	Describing design as a sequence of steps cannot convey the complexity of social interactions that it embodies. Design is not merely a process, but a co-evolution of efforts and events in various places and times—both synchronous and asynchronous. Designers share their values, effort and expertise within design settings via artifacts that further the design process. Increasingly, these design settings in academia, research, and professional practice combine physical and virtual modalities such as immersion, projection, and a range of interaction technologies. Peter Anders has described such spaces as cybrids: hybrids that integrate virtual and physical space. In these settings, designers use overlapping physical and virtual artifacts and tools to arrive at a co-operative design resolution. Within collaborative design, these artifacts take on an additional role. As embodiments of design ideas and actions, they become media for communication. Donald Schon asserts that design should be considered a form of making, rather than primarily a form of problem solving, information processing or research. Indeed the line separating creation from design is becoming increasingly blurred. For the design artifact itself may become a part of the design proposal—its virtual presence incorporated within a cybrid structure or object. We may in the future see a proliferation of cybrid settings that support collaborative, digital design. The technologies for this already exist in collaborative tools, networked computing, scanning and immersive media. However, it will take a creative vision to see how these disparate tools and devices can integrate within the ideal design setting.
series	ACADIA
email
last changed	2022/06/07 07:49

_id	ecaade03_653_144_koutamanis
id	ecaade03_653_144_koutamanis
authors	Koutamanis, Alexander and Steijns, Yolanda
year	2003
title	Types and precedents in design guidance
source	Digital Design [21th eCAADe Conference Proceedings / ISBN 0-9541183-1-6] Graz (Austria) 17-20 September 2003, pp. 653-658
doi	https://doi.org/10.52842/conf.ecaade.2003.653
summary	In recent years Dutch secondary education has been undergoing a fundamental change due to the introduction of new didactic approaches which relate strongly to ongoing social and technological developments. This affects existing school buildings, the majority of which is quite conventional in spatial terms and is characterized by limited flexibility and transformability. Consequently, most schools require extensive modifications in their spatial and building structure. The requirements underlying these modifications are not stable. Many schools have become interested in experimental ideas that may require inevitably further changes in the buildings. The paper considers the continuous transformation of Dutch school buildings with respect to their typology: by correlating new design briefs to building types rather than their instances we arrive at general guidelines that can be easily adapted to specific cases. To achieve this, the types are analysed with respect to geometry, topology and zoning. The results of the analysis describe the affordances of each type in terms of general flexibility, transformability and adaptability, as well as in relation to generic briefs. They also provide an explanation of the historical evolution of the types and the means for relating primary characteristics to local configurations, thereby allowing the accurate description of hybrid instances. The descriptions and analysis of buildings are organized into a polyhierarchical multilevel database that supports typological abstraction and offers several starting points (at various abstraction levels) for matching a new brief to an existing building. This enriches the development of the brief or a design solution with explicit, specific information derived from concrete precedents with known form, structure, behaviour and performance.
keywords	Typology, precedence, case-based design, briefing, design information systems
series	eCAADe
email
more	http://www.re-h.nl/transformaties/
last changed	2022/06/07 07:51

_id	cf2003_m_110
id	cf2003_m_110
authors	OXMAN, Rivka
year	2003
title	Designing the Virtual Design University
source	Digital Design - Research and Practice [Proceedings of the 10th International Conference on Computer Aided Architectural Design Futures / ISBN 1-4020-1210-1] Tainan (Taiwan) 13–15 October 2003, pp. 291-300
summary	Universities are currently providing learning opportunities to students and teachers exploiting information and communication technologies to deliver their programs and provide tuition support. However, since architectural design education is unique, general models of e-learning are not applicable. Regarding a potential virtual design university there is therefore a particular need for a theoretical pedagogical framework. The objective of this paper is to present a theoretical basis for the design and implementation of a unique e-learning environment suitable for design learning and design teaching in the architectural and engineering domains. The ideas and the concepts are currently being implemented in the WINDS project. Three theoretical and methodological aspects that provide unique consideration for the construction of a virtual learning environment for design are presented and discussed: 1) A unique structure of design knowledge as required in virtual education; 2) A requisite pedagogic framework for virtual design education; and 3) A particular technology designed and implemented to support these aspects in WINDS.
keywords	design pedagogy, e-learning, virtual university
series	CAAD Futures
email
last changed	2003/09/22 12:21

_id	c544
id	c544
authors	Pektas, S T
year	2003
title	PROCESS INTEGRATION IN BUILDING DESIGN USING THE PARAMETER-BASED DESIGN STRUCTURE MATRIX
source	Design Studies, 27(1), pp. 99-122In B. Tuncer (Ed.), E-Activities in Building Design and Construction. (pp. 63-72). Paris: Europia
summary	This paper reviews existing process models in the Architecture-Engineering-Construction (AEC) industry and identifies two common deficiencies in them: 1. Current process models used in the industry still have a top-down approach including very little information about interrelationships at lower levels. Although these models provide a good overview of the design process, they are often too abstract to define, in detail, for complex multi-parameter problems. 2. Iteration is an important problem in collaborative design. However, most of the existing process models fail in identifying and minimizing it. With a view to alleviate these problems, this paper introduces the parameter-based Design Structure Matrix (DSM) as a tool for process integration and improvement in building design. The uses of the tool are shown via simple examples and suggestions are made for further research.
keywords	Process Integration, Process Modelling, and Parameter-based Design Structure Matrix
series	other
type	normal paper
email
last changed	2005/12/01 15:49

_id	64c0
id	64c0
authors	Pektas, S T
year	2003
title	A FRAMEWORK FOR BUILDING DESIGN PROCESS MODELING WITH PARAMETER-BASED DESIGN STRUCTURE MATRICES
source	In C. J. Anumba (Ed.), Innovative Developments in Architecture, Engineering, and Construction. (pp. 25-31). Rotterdam: MillPress
summary	Architecture/Engineering/Construction (AEC) industry is one of the multidisciplinary domains in which collaboration among related parties is utmost important. While the knowledge needed for building processes are distributed among the different participants from diverse disciplinary backgrounds, the product of their activities, i.e. the building itself, must be highly integrated. Despite the intense flow of information between design professionals, there is a lack of research to better understand and manipulate these flows. Furthermore, most of the current process modeling tools in the AEC industry do not enable analyses of iteration in the process and they represent the process at high levels with very little information at lower levels. In order to resolve the issues mentioned above, this paper introduces the use of parameter-based dependency structure matrix as a process modeling and system analysis tool for building design. The method reveals insights into the process structure, optimum sequence of parameter decisions, iterative cycles and concurrency in the process. A knowledge management framework for parameter-based DSM applications is proposed and the application of the framework is demonstrated through a real life building design problem.
keywords	Design Integration, Design Process Modeling, Information Flow, and Parameter-based Dependency Structure Matrix
series	other
type	normal paper
email
last changed	2005/12/01 15:52

_id	ijac20031307
id	ijac20031307
authors	Tosello, Maria E.
year	2003
title	Performing Cyberspace: Dance, Technology and Virtual Architecture
source	International Journal of Architectural Computing vol. 1 - no. 3
summary	This project investigates the design, construction and experimentation in digital environments. The work intends to contribute to the evolution of the virtual universe by studying what can be particular architectural expressions of cyberspace. Specifically the project explores the potential architectural manifestations of existential situations in cyberspace. The design goal is to artistically express, through virtual environments, the invisible part of ourselves, our thoughts and emotions. This work critically engages the cyberPRINT, a ongoing creative-research project of Prof. Bermudez and the C.R.O.M.D.I team at the University of Utah in the U.S.A. [1] This project uses the cyberPRINT concept and technology of obtaining physiological data and translating them into digital spaces. However, it proposes a new "world" for the cyberPRINT. The final product consists in a performance where a dancer sends his biological signals to the computer to generate and transform digital environments, and also represents through his movements, the desired existential situation.
series	journal
more	http://www.multi-science.co.uk/ijac.htm
last changed	2007/03/04 07:08

_id	caadria2003_a7-3
id	caadria2003_a7-3
authors	Zhou, Q.
year	2003
title	From CAD to iAD - A Prototype Simulation of the Internet-based Steel Construction Consulting for Architects
source	CAADRIA 2003 [Proceedings of the 8th International Conference on Computer Aided Architectural Design Research in Asia / ISBN 974-9584-13-9] Bangkok Thailand 18-20 October 2003, pp. 919-936
doi	https://doi.org/10.52842/conf.caadria.2003.919
summary	Information technology has become so powerful and interactive that what is conventionally called CAD might evolve into iAD (Internet Aided Design). For Internet applications in the AEC (Architecture, Engineering and Construction) industry, most of the efforts and applications have been concentrated on project management and collaboration, while in the area of design and engineering consulting, limited progress has been made. Even with some of this success, contemporary development has not changed the nature of the fragmentation of the AEC industry. Based on previous research surveys (Zhou & Krawczyk 2001) of the development of Internet applications in the AEC industry and the proposal of a conceptual model of Internet-based engineering consulting in architecture, this research will apply these theories and concepts into a specified area of steel construction consulting for architects. The first phase of this research will define the content and scope of steel construction consulting and the potential Internet application. Second, a proposed solid working model is developed covering organizational structure, user network, services provided and technology. In the third phase (as this paper presented), a prototype simulation is used to apply the concepts and methodology in a preliminary design application to demonstrate how this Internet-based consulting model would work.
series	CAADRIA
last changed	2022/06/07 07:57

_id	caadria2003_c2-4
id	caadria2003_c2-4
authors	Al-Sallal, Khaled A.
year	2003
title	Integrating Energy Design Into Caad Tools: Theoretical Limits and Potentials
source	CAADRIA 2003 [Proceedings of the 8th International Conference on Computer Aided Architectural Design Research in Asia / ISBN 974-9584-13-9] Bangkok Thailand 18-20 October 2003, pp. 323-340
doi	https://doi.org/10.52842/conf.caadria.2003.323
summary	The study is part of a research aims to establish theoretical grounds essential for the development of user efficient design tools for energy-conscious architectural design, based on theories in human factors of intelligent interfaces, problem solving, and architectural design. It starts by reviewing the shortcomings of the current energy design tools, from both architectural design and human factor points of view. It discusses the issues of energy integration with design from three different points of view: architectural, problem-solving, and human factors. It evaluates theoretically the potentials and limitations of the current approaches and technologies in artificial intelligence toward achieving the notion "integrating energy design knowledge into the design process" in practice and education based on research in the area of problem solving and human factors and usability concerns. The study considers the user interface model that is based on the cognitive approach and can be implemented by the hierarchical structure and the object-oriented model, as a promising direction for future development. That is because this model regards the user as the center of the design tool. However, there are still limitations that require extensive research in both theoretical and implementation directions. At the end, the study concludes by discussing the important points for future research.
series	CAADRIA
email
last changed	2022/06/07 07:54

_id	sigradi2005_731
id	sigradi2005_731
authors	Albornoz Delgado, Humberto Ángel; Laura Talía Escalante Rodríguez, Leticia Gallegos Cazares
year	2005
title	Didactic Design: light and optics for preschool level
source	SIGraDi 2005 - [Proceedings of the 9th Iberoamerican Congress of Digital Graphics] Lima - Peru 21-24 november 2005, vol. 2, pp. 731-737
summary	Since 2003, we have been developing a pedagogic proposal and didactic material for teaching Light and Optics to kindergarden children that enhances the construction of the first scientific thinking schemes. The design (industrial and graphic) applied to this project has generated an educational product composed of 44 objects. These materials allow teaching concepts such as: combination of colors, light indispensable to see, formation of shadows and images are not objects. These have been developed as inciters of curiosity, capable to awake the innate restlessness of children, achieving to stimulate their creativity. The purpose is to explore knowledge and construct their own ideas; enrich their experiences and inquire a reality that was drawn grey and tedious, generating a process of manipulation-action and then representation-conceptualization. This product has been successfully used as a pilot test in a kindergarden, reflecting significant gains in students’ science learning. [Full paper in Spanish]
series	SIGRADI
email
last changed	2016/03/10 09:47

_id	avocaad_2003_05
id	avocaad_2003_05
authors	Alexander Koutamanis
year	2003
title	Autonomous mechanisms in architectural design systems
source	LOCAL VALUES in a NETWORKED DESIGN WORLD - ADDED VALUE OF COMPUTER AIDED ARCHITECTURAL DESIGN, Stellingwerff, Martijn and Verbeke, Johan (Eds.), (2004) DUP Science - Delft University Press, ISBN 90-407-2507-1.
summary	The development of architectural design systems that describe fully the form, structure and behaviour of a design relies heavily on the incorporation of intelligence in the representations, analyses, transformations and transactions used by the computer. Traditionally such intelligence takes either of two forms. The first is a methodical framework that guides actions supported by the design system (usually in a top-down fashion). The second is local, intelligence mechanisms that resolve discrete, relatively well-defined subproblems (often with limited if any user intervention). Local intelligent mechanisms offer the means for adaptability and transformability in architectural design systems, including the localization of global tendencies. This refers both to the digital design technologies and to the historical, cultural and contextual modifications of design styles and approaches.
keywords	Architecture, Local values, Globalisation, Computer Aided Architectural Design
series	AVOCAAD
email
last changed	2006/01/16 21:38

_id	sigradi2003_096
id	sigradi2003_096
authors	Alvarez, Valeria and Albero, Constanza
year	2003
title	Una rama en la arquitectura de la era digital (A branch in architecture of the digital age)
source	SIGraDi 2003 - [Proceedings of the 7th Iberoamerican Congress of Digital Graphics] Rosario Argentina 5-7 november 2003
summary	Genetic information determines the germ of life, the first idea, that encloses all the power of creation. In every "germ" lays the identity, the strength to seek and fulfill expression in form. History, technical and scientific progress require new answers and provide new tools while encouraging investigation. A "Branch", a simple nature element, is reinterpreted into bits of information, reconstructed after being apprehended. This process reveals new elements that could have never been conceived with traditional methods. Nature and Technology complement each other in an embriological growing system that provides a new concept in the construction of real spaces.
series	SIGRADI
email
last changed	2016/03/10 09:47

For more results click below: