Cumincad : CUMINCAD Papers : Search Results

CumInCAD is a Cumulative Index about publications in Computer Aided Architectural Design
supported by the sibling associations ACADIA, CAADRIA, eCAADe, SIGraDi, ASCAAD and CAAD futures

PDF papers
References

Hits 1 to 20 of 561

Reformat results as: short short into frame detailed detailed into frame

_id	2004_184
id	2004_184
authors	Fatah gen. Schieck, Ava
year	2004
title	Using Multiple Input Devices
source	Architecture in the Network Society [22nd eCAADe Conference Proceedings / ISBN 0-9541183-2-4] Copenhagen (Denmark) 15-18 September 2004, pp. 184-194
doi	https://doi.org/10.52842/conf.ecaade.2004.184
summary	The field of computer graphics has developed significantly over the last decade. However, most current CAD systems support only the two most common input devices: a mouse and a keyboard. In addition to that few, if any, systems make it easy for the user or the programmer to add and use new input devices. People tend to use both hands to manipulate 3D real world objects; one hand is used to orient the object while the other hand is used to perform some operation on it. The same thing could be applied to computer modelling in the conceptual phase of the design process. Accordingly, the 3D object can be easily and intuitively changed through interactive manipulation of both hands. This paper investigates the manipulation and creation of free form geometries through the use of interactive interfaces with multiple input devices. It demonstrates that using multiple input devices can offer many opportunities for form generation resulting in visually rich forms. However, the experimental results demonstrated that regulations are needed to avoid developing inefficient two-handed interfaces.
keywords	Modelling Interactively, Architectural Design Tools at the Conceptual Phase, Affordable Low-Cost Solution, Multiple Input Devices MID
series	eCAADe
last changed	2022/06/07 07:55

_id	ddss2004_ra-99
id	ddss2004_ra-99
authors	Göttig, R., J. Newton, and S. Kaufmann
year	2004
title	A COMPARISON OF 3D VISUALIZATION TECHNOLOGIES AND THEIR USER INTERFACES WITH DATA SPECIFIC TO ARCHITECTURE
source	Van Leeuwen, J.P. and H.J.P. Timmermans (eds.) Recent Advances in Design & Decision Support Systems in Architecture and Urban Planning, Dordrecht: Kluwer Academic Publishers, ISBN: 1-4020-2408-8, p. 99-111
summary	Contemporary advanced virtual reality systems use different stereoscopic 3D visualization technologies. In this study, VR systems from one projection wall up to VR systems with six projection walls have been evaluated. Besides the optical properties tested with architectural 3D models, the user interfaces have been analyzed with reference to exact and intuitive control abilities. Additionally, the workflow of an early architectural design process with CAAD generated 3D models and VR visualization techniques was analyzed. It turns out that current VR systems exhibit shortcomings in visual and spatial representations, as well as tools for an early design process.
keywords	3D-Systems, Virtual Reality, Powerwall, Holobench, HMD, CAVE, User Interfaces, Visual Display Qualities, Design Process
series	DDSS
type	normal paper
last changed	2004/07/03 23:02

_id	508caadria2004
id	508caadria2004
authors	Tomas V. Dorta
year	2004
title	Drafted Virtual Reality - A New Paradigm to Design with Computers
source	CAADRIA 2004 [Proceedings of the 9th International Conference on Computer Aided Architectural Design Research in Asia / ISBN 89-7141-648-3] Seoul Korea 28-30 April 2004, pp. 829-844
doi	https://doi.org/10.52842/conf.caadria.2004.829
summary	This paper proposes a new technique for designing spaces, called Drafted Virtual Reality (DVR), to be used in interior, architectural or industrial design. It proposes the construction of virtual panoramic environments through the QuickTime VR (QTVR) Panorama platform (Apple), starting from sketches made by hand using traditional pen-on-paper techniques. To construct these drawings, the designer uses the computer to build a graphic panoramic template. Using this technique, the designer takes advantage of both approaches, the capacities and possibilities of the computer using VR (3D environments, interaction and real-time), and those of free-hand sketches (abstraction, inaccuracy and ambiguity). These last elements are essential for the first steps of the design process in contrast to the conventional techniques of 3D modeling interacting with mouse and menus. In the development of design computer solutions, it is important to know the user well. However, most researchers propose systems very different than how designers actually work. The DVR doesn’t try to simulate analog tools by computers (digital pens), but takes advantage of hand drawn sketches created using analog techniques that are already known by designers and improved by VR visualization. A review of the implication of this technique on the design process. Not only is the technique fast and easy to learn, the results show that the designer can express their individuality and the idiosyncrasies of their personal sketches; important elements hard to achieve with conventional 3D modeling techniques. Finally, this technique can be perceived as a new paradigm in the way we work with computers in design. The limitations of interfaces and usage of current technology are seen when the designer outputs information from the system to process using other analog techniques. The proposed solution marries the existing competencies and techniques of the designer with the advantages of the computer processing. The quality of the virtual experience of this technique is consistent with current designer’s intentions within the traditional design process.
series	CAADRIA
email
last changed	2022/06/07 07:58

_id	sigradi2004_323
id	sigradi2004_323
authors	Yoshihiro Kobayashi; Meenakshi Sharma
year	2004
title	Dynamic interface for axial spatial arrangements using soft computing
source	SIGraDi 2004 - [Proceedings of the 8th Iberoamerican Congress of Digital Graphics] Porte Alegre - Brasil 10-12 november 2004
summary	This paper describes a computer application that can organize 3D objects along an axis and also redistribute those based on a set of constraints or existing patterns as selected by the user. In particular, the focus of the paper is the two dynamic Graphical User Interfaces (GUIs): the Constraint Arrangement (CA) and the Pattern Arrangement (PA). For these, we use the Soft Computing Techniques . Kohonen.s Self Organizing Map (SOM) and Genetic Algorithm (GA). In both the cases, the application outputs an axial organization of predefined 3D objects which, either adhere to selected constraints or follow patterns set by prior design. The application is implemented, tested and its results are demonstrated using buildings systems.
series	SIGRADI
email
last changed	2016/03/10 10:03

_id	avocaad_2003_06
id	avocaad_2003_06
authors	Arturo F. Montagu and Juan Pablo Cieri
year	2003
title	Urbamedia - Development of an urban database of fragments of some Argentinian and Latin-American cities using digital technology
source	LOCAL VALUES in a NETWORKED DESIGN WORLD - ADDED VALUE OF COMPUTER AIDED ARCHITECTURAL DESIGN, Stellingwerff, Martijn and Verbeke, Johan (Eds.), (2004) DUP Science - Delft University Press, ISBN 90-407-2507-1.
summary	The proposal of "Urbamedia" is to undertake the development of 3D virtual and interactive models of historical areas of Latin-American cities. The selected zone is the "Mayo Avenue" including the "Mayo Square", an historical place of the city of Buenos Aires, Argentina; this project is financed by the National Agency of Scientific and Technological Development of Argentina and the University of Buenos Aires.We are presenting the first experimental model of the "Mayo Square" that has been developed at ABACUS, Department of Architecture & Building Aids Computer Unit, University of Strathclyde UK. combined with a system analysis of urban activities using the “Atlas.ti” CAQDAS software.This particular use of the “Atlas.ti” software is under experimental applications to this type of urban analysis procedures; allowed us the possibility to analysed a set of activities by means of graph theory as result of a series of interviews to the people working in the area. We are also looking to include historical areas of three cities: Mar del Plata, Rosario and Santa Fe (Argentina) and eventually other cities from Latin América as Rio de Janeiro and Habana.Due that ABACUS has a strong experience in city modelling plus the powerful software and hardware used there, we must develop a VRML customized menu to be adapted to our low cost PC equipment. The 3D model will be used mainly in urban design simulation procedures and the idea is to extend to other type of simulations of the environmental parameters.
keywords	Architecture, Local values, Globalisation, Computer Aided Architectural Design
series	AVOCAAD
email
last changed	2006/01/16 21:38

_id	ddss2004_ra-247
id	ddss2004_ra-247
authors	Bi, G. and B. Medjdoub
year	2004
title	Hybrid Approach to Solve Space Planning Problems in Building Services
source	Van Leeuwen, J.P. and H.J.P. Timmermans (eds.) Recent Advances in Design & Decision Support Systems in Architecture and Urban Planning, Dordrecht: Kluwer Academic Publishers, ISBN: 1-4020-2408-8, p. 247-261
summary	In this paper an object-based CAD programming is used to take advantage of standardization to handle the schematic design, sizing, layout for services in a building ceiling void. From the specification of the building 3D model, our software proceeds through different steps; from the determination of the standard number and size of fan coils to the generation of 3D solutions. In order to deal with more complex geometry and larger problems, we have used a hybrid approach: Case Based Reasoning (CBR) within Constraint Satisfaction Problem (CSP) approaches. In practice, engineers in building services use previous solutions and adapt them to new problems. CBR mirrors this practical approach and does help us to deal with increasingly complex geometry effectively, and meanwhile CSP has been used for layout adaptation. The results have shown that it is possible to define and implement standard solutions to produce designs comparable with current practice. The benchmarking exercise has underlined many advantages and made some suggestions for further development. This project is funded by The Engineering and Physical Sciences Research Council (EPSRC) in UK.
keywords	Case-Based Reasoning, Constraint Satisfaction Problem, Ceiling Voids Layout, Complex Geometry, Large Problem
series	DDSS
last changed	2004/07/03 22:13

_id	cf2011_p157
id	cf2011_p157
authors	Boton, Conrad; Kubicki Sylvain, Halin Gilles
year	2011
title	Understanding Pre-Construction Simulation Activities to Adapt Visualization in 4D CAD Collaborative Tools
source	Computer Aided Architectural Design Futures 2011 [Proceedings of the 14th International Conference on Computer Aided Architectural Design Futures / ISBN 9782874561429] Liege (Belgium) 4-8 July 2011, pp. 477-492.
summary	Increasing productivity and efficiency is an important issue in the AEC field. This area is mainly characterized by fragmentation, heterogeneous teams with low lifetimes and many uncertainties. 4D CAD is one of the greatest innovations in recent years. It consists in linking a 3D model of the building with the works planning in order to simulate the construction evolution over time. 4D CAD can fill several needs from design to project management through constructivity analysis and tasks planning (Tommelein 2003). The literature shows that several applications have been proposed to improve the 4D CAD use (Chau et al. 2004; Lu et al. 2007; Seok & al. 2009). In addition, studies have shown the real impact of 4D CAD use in construction projects (Staub-French & Khanzode 2007; Dawood & Sika 2007). More recently, Mahalingam et al. (2010) showed that the collaborative use of 4D CAD is particularly useful during the pre-construction phase for comparing the constructability of working methods, for visually identifying conflicts and clashes (overlaps), and as visual tool for practitioners to discuss and to plan project progress. So the advantage of the 4D CAD collaborative use is demonstrated. Moreover, several studies have been conducted both in the scientific community and in the industrial world to improve it (Zhou et al. 2009; Kang et al. 2007). But an important need that remains in collaborative 4D CAD use in construction projects is about the adaptation of visualization to the users business needs. Indeed, construction projects have very specific characteristics (fragmentation, variable team, different roles from one project to another). Moreover, in the AEC field several visualization techniques can represent the same concept and actors choose one or another of these techniques according to their specific needs related to the task they have to perform. For example, the tasks planning may be represented by a Gantt chart or by a PERT network and the building elements can be depicted with a 3D model or a 2D plan. The classical view (3D + Gantt) proposed to all practitioners in the available 4D tools seems therefore not suiting the needs of all. So, our research is based on the hypothesis that adapting the visualization to individual business needs could significantly improve the collaboration. This work relies on previous ones and aim to develop a method 1) to choose the best suited views for performed tasks and 2) to compose adapted multiple views for each actor, that we call ‚Äúbusiness views‚Äù. We propose a 4 steps-method to compose business views. The first step identifies the users‚Äô business needs, defining the individual practices performed by each actor, identifying his business tasks and his information needs. The second step identifies the visualization needs related to the identified business needs. For this purpose, the user‚Äôs interactions and visualization tasks are described. This enables choosing the most appropriate visualization techniques for each need (step 3). At this step, it is important to describe the visualization techniques and to be able to compare them. Therefore, we proposed a business view metamodel. The final step (step 4) selects the adapted views, defines the coordination mechanisms and the interaction principles in order to compose coordinated visualizations. A final step consists in a validation work to ensure that the composed views really match to the described business needs. This paper presents the latest version of the method and especially presents our latest works about its first and second steps. These include making more generic the business tasks description in order to be applicable within most of construction projects and enabling to make correspondence with visualization tasks.
keywords	Pre-construction, Simulation, 4D CAD, Collaboration, Computer Supported Cooperative Work, Human-Computer Interface, Information visualization, Business view, Model driven engineering
series	CAAD Futures
email
last changed	2012/02/11 19:21

_id	ddss2008-33
id	ddss2008-33
authors	Charlton, James A.; Bob Giddings and Margaret Horne
year	2008
title	A survey of computer software for the urban designprocess
source	H.J.P. Timmermans, B. de Vries (eds.) 2008, Design & Decision Support Systems in Architecture and Urban Planning, ISBN 978-90-6814-173-3, University of Technology Eindhoven, published on CD
summary	Urban design is concerned with the shape, the surface and the physical arrangement of all kinds of urban elements, the basic components that make up the built environment, at the level of buildings, spaces and human activities. It is also concerned with the non-visual aspects of the environment, such as noise, wind and temperature and humidity. The city square is a particular urban element which can take many forms and its geometrical relationships such as maximum dimensions, ratio of width to length and building height to length have been analysed for centuries (Alberti 1475), (Vitruvius 1550), (Sitte 1889), (Corbett 2004). Within the current urban design process there are increasing examples of three dimensional computer representations which allow the user to experience a visual sense of the geometry of city squares in an urban landscape. Computer-aided design and Virtual Reality technologies have recently contributed to this visual assessment, but there have been limited attempts at 3D computer representations which allow the user to experience a greater sense of the urban space. This paper will describe a survey of computer tools which could support a more holistic approach to urban design and which could be used to simulate a number of urban texture and urban quality aspects. It will provide a systematic overview of currently available software that could support the simulation of building density, height, colour and style as well as conditions relating to noise, shading, heat, natural and artificial light. It will describe a methodology for the selection and filtering of appropriate computer applications and offer an initial evaluation of these tools for the analysis and representation of the three-dimensional geometry, urban texture and urban quality of city centre spaces. The paper is structured to include an introduction to the design criteria relating to city centre spaces which underpins this research. Next the systematic review of computer software will be described, and selected tools will undergo initial evaluation. Finally conclusions will be drawn and areas for future research identified.
keywords	Urban design, Software identification, 3D modelling, Pedestrian modelling, Wind modelling, Noise mapping, Thermal comfort, VR Engine
series	DDSS
last changed	2008/09/01 17:06

_id	sigradi2004_175
id	sigradi2004_175
authors	Diana Rodríguez Barros
year	2004
title	Modelos urbanos virtuales y lecturas hipermediales [Virtual Urban Models and Hypermedia Readings]
source	SIGraDi 2004 - [Proceedings of the 8th Iberoamerican Congress of Digital Graphics] Porte Alegre - Brasil 10-12 november 2004
summary	The urban virtual models are complex environments where interactive modelization and visualization systems have developed high advances, making possible they applications in many different purposes, by expert and non-expert users. Is interesting, in hypermedial reading, to recognise and to evaluate the advantages and obstacles to examine a 2D-3D-4D-5D model. In that direction is presented an exploratory study of preexperimental design, in which is investigated the impacts and influences in non-expert users, that the presence and use of interactive strategies of navigation, selection and manipulation, produces in the results and affects the attitudes with regard to the possibilities of understanding and integration of information and in the confusion and cognitive overflow. The objective is to contribute in the definition and systematization of methodologys and design patterns about interfaces and interactions in three-dimensional hypermedia, from theoretical, operating and pedagogical approach.
keywords	Hypermedial / virtual model /interaction/ interface / exploratory study
series	SIGRADI
email
last changed	2016/03/10 09:50

_id	acadia04_020
id	acadia04_020
authors	Eastman, Charles
year	2004
title	New Methods of Architecture and Building
source	Fabrication: Examining the Digital Practice of Architecture [Proceedings of the 23rd Annual Conference of the Association for Computer Aided Design in Architecture and the 2004 Conference of the AIA Technology in Architectural Practice Knowledge Community / ISBN 0-9696665-2-7] Cambridge (Ontario) 8-14 November, 2004, 20-27
doi	https://doi.org/10.52842/conf.acadia.2004.020
summary	Three conditions exist that are likely to lead to significant restructuringof the construction industry. These are (1): the recognition that traditional contracting practices are inefficient and costly to the client, (2) the growing availability of information-rich 3D parametric modeling, and (3) the strong interest in integrating the issues of design and fabrication. Some aspects of these conditions are examined using two examples: parametric design and integration in steel structural design, and in fabrication-level modeling of precast concrete. The implications of these changes are explored.
series	ACADIA
last changed	2022/06/07 07:55

_id	sigradi2004_169
id	sigradi2004_169
authors	Edison Pratini
year	2004
title	An experience on supporting the learning of technical graphics and improving visualization
source	SIGraDi 2004 - [Proceedings of the 8th Iberoamerican Congress of Digital Graphics] Porte Alegre - Brasil 10-12 november 2004
summary	This paper presents an experience of applying computer graphics, virtual reality and Internet resources in the teaching of technical graphics in engineering and design courses at the University of Brasilia, Brazil. Our motivation was the fact that most of the students have a lack of previous knowledge on the basis of drawings, resulting difficulties in both understanding and visualizing technical drawings. As an experimental method, we introduced VRML 3D modeling in addition to CAD and regular pencil-and-paper drawings study and practice. To better support learning, we first provided a website with animations and virtual reality resources, avoiding the usual textbook metaphor. Since 2003 we are providing a CD-ROM containing all the former website material which is updated each semester. This experience is intended to improve the learning in a way that motivates the students. Classes, website and CD-ROM material was conceived to take advantage of computers´ interactivity and animated resources.
keywords	Distance learning, interactivity, Internet, technical graphics, 3D modeling
series	SIGRADI
email
last changed	2016/03/10 09:51

_id	sigradi2004_326
id	sigradi2004_326
authors	Gilberto Corso Pereira
year	2004
title	Visualização e representação do espaço urbano [Visualization and Representation of Urban Space]
source	SIGraDi 2004 - [Proceedings of the 8th Iberoamerican Congress of Digital Graphics] Porte Alegre - Brasil 10-12 november 2004
summary	This project had as goal to investigate how an urban space can be represented, and how can we to present information that facilitated broad and interactive spatial analysis in an easy and friendly way. This target was reached trough the elaboration of a computer application that allowed urban information visualization about Salvador City. This tool let users to build thematic cartography, visualize interactive 3D models, images, etc. Project development already produced two different prototypes. First versions provide a great spatial analyze flexibility, but it interface founded in a workspace defined do not allow user to do all overlayer possible. In this case the tool was a kind of cartographic atlas. The actual version had as design presuppose, to give users more information, interactivity, power and flexibility, adopting new medias, new representation models, and presenting quantitative and qualitative information.
series	SIGRADI
email
last changed	2016/03/10 09:52

_id	2004_500
id	2004_500
authors	Hanzl, Malgorzata and Wrona, Stefan
year	2004
title	Visual Simulation as a Tool for Planning Education - Computer Aided Participation Support
source	Architecture in the Network Society [22nd eCAADe Conference Proceedings / ISBN 0-9541183-2-4] Copenhagen (Denmark) 15-18 September 2004, pp. 500-507
doi	https://doi.org/10.52842/conf.ecaade.2004.500
summary	Contemporary computer techniques offer many new opportunities to engage citizens into the planning process. There are new possibilities of interaction, introducing an observer into the “game”. The research project presented in the paper assumes the use of a visual 3D language which consists of a series of schematic types of buildings. They form a language which is easy to understand both by professionals and by laymen. Understanding is the very first step towards getting convinced by the ideas presented. The next step is interaction - the user’s action induces the response of the system. The solution proposed by the user meets an evaluation from the part of the system which evokes the user’s interest - in the case presented here the evaluation introduces the simulation of future state of the site. The problem posed is to find out the best way to convince people that some places are less or more suitable for settlement, depending on the media present there, distance from the urban areas and the environment protection. The attempt to create a tool which could be helpful in an educational process is described in the paper. The idea is to prepare a form of a master plan record which uses the visual 3D language and may be accessed via World Wide Web pages. The paper formulates the assessments for the software described above and examines the possibility to create an application. The trial to prepare a web based service using the flash and shockwave technology is presented.
series	eCAADe
email
last changed	2022/06/07 07:49

_id	eaea2003_0
id	eaea2003_0
authors	Kardos, P. and Urland, U. (Eds.)
year	2004
title	SPATIAL SIMULATION AND EVALUATION - NEW TOOLS IN ARCHITECTURAL AND URBAN DESIGN
source	Proceedings of the 6th European Architectural Endoscopy Association Conference / ISBN 80-227-2088-7, 144 p.
summary	The 5th eaea Conference in Essen yielded four principal findings: • After having been limited to endoscopic picture and film renderings of analog scaled models, the european architectural endoscopy association (eaea) first bridged the gap to digital environmental simulations at this conference. It is not about a better or correct method, but a suitable method of representing the planned reality of a particular project using ways that make sense. The combination of digital and analog simulation media is a source of impetus to the user of both methods. The future belongs to the casespecific application and the numerous integration possibilities of the two different media. • In investigating the perception of pictures produced in both analog and digital form, it was ascertained that it was only after greater effort that the same level of pleasing qualities were achieved in the digital world, compared to pictures of analog scaled models. It seems that for many planning phases model-based pictures are superior to digital photos – with regards to economy, quality of representation and imaginative attributes. This last point seems to be especially important in the draft planning stages: the less sharp a picture is, the more remaining room for viewer interpretation there is. In particular, the high degree of precision characteristic of digital simulations no longer allows room for imagination in the individual viewer. • 3D environmental simulations will increasingly be incorporated with success in architecture and urban design courses at universities and colleges both here in Germany as well as abroad. The further spread of these techniques to other universities and colleges is desirable. Over and above application as a pedagogic tool, the use of these simulations by architects and city planners, private planning agencies and municipal planning administrators will also be in evidence in the future – for checking designs, for informing the involved parties, for establishing the decisions of government bodies, for marketing the project. • Also, the interactive use of endoscopic simulation facilities continually opens new fields of research – whether it be for registering subjective distance perception, whether it be for determining orientation possibilities in open spaces.
series	EAEA
type	normal paper
email
more	http://info.tuwien.ac.at/eaea
last changed	2005/09/09 10:43

_id	502caadria2004
id	502caadria2004
authors	Kirsty A. Beilharz
year	2004
title	Designing Generative Sound for Responsive 3D Digital Environment Interaction
source	CAADRIA 2004 [Proceedings of the 9th International Conference on Computer Aided Architectural Design Research in Asia / ISBN 89-7141-648-3] Seoul Korea 28-30 April 2004, pp. 741-758
doi	https://doi.org/10.52842/conf.caadria.2004.741
summary	This paper examines three key areas of responsive sound interaction in 3D Digital Environments: designing generative sound that derives its composition and relevance from social and physical human interaction within a digital environment; the relation of sonic structure to the digital visual and spatial experience; and responsive, reactive real time sound generation activated by environmental conditions and human behaviours. The primary purposes for responsive sound design are: (1) to provide navigational cues supporting way-finding and spatial orientation; and (2) to provide realtime generative environmental sound that reflects social behaviour in a way that is meaningful and recognisable. The applied contexts for navigational cues and environmental generative sound include online (multi-user), synchronous Virtual Environments and Digital Installation Spaces (e.g. intelligent rooms, virtual reality and immersive environments). Outcomes of responsive sound design include: a trigger system of aural alerts, warnings and guidance; a computational system for generating sound in real time activated by spatial location and social interaction; and an audio (non-visual) tool aiding spatial orientation and way-finding interaction in 3D immersive Digital Environments.
series	CAADRIA
email
last changed	2022/06/07 07:51

_id	2004_074
id	2004_074
authors	Lang, Silke and Hovestadt, Ludger
year	2004
title	Interaction in Architectural Immersive Applications Using 3D Video
source	Architecture in the Network Society [22nd eCAADe Conference Proceedings / ISBN 0-9541183-2-4] Copenhagen (Denmark) 15-18 September 2004, pp. 74-81
doi	https://doi.org/10.52842/conf.ecaade.2004.074
summary	In this paper we describe the impact of 3D video technology on immersive telepresence applications in the context of architecture. This technology enables new ways of collaborating and communicating between distant locations. The photorealistic appearance of a 3D user representation and other objects allows for natural and close co-operation in immersive spaces. We conclude with experiences and results derived from inserting and interacting with 3D representations of users in specific Virtual Reality scenarios.
keywords	Human-Computer Interaction, 3D Video, Virtual Reality, Tele-Immersion, Prediction and Evaluation
series	eCAADe
last changed	2022/06/07 07:52

_id	acadia04_176
id	acadia04_176
authors	Loukissas, Yanni and Sass, Lawrence
year	2004
title	RULEBUILDING (3D PRINTING: OPERATORS, CONSTRAINTS, SCRIPTS)
source	Fabrication: Examining the Digital Practice of Architecture [Proceedings of the 23rd Annual Conference of the Association for Computer Aided Design in Architecture and the 2004 Conference of the AIA Technology in Architectural Practice Knowledge Community / ISBN 0-9696665-2-7] Cambridge (Ontario) 8-14 November, 2004, 176-185
doi	https://doi.org/10.52842/conf.acadia.2004.176
summary	3-D printers alter the speed, cost, complexity, and consistency with which physical architecture models can be crafted. If architects are to harness the unique abilities of this modeling process, it is necessary to find a complementary means of conceptualizing designs and generating the geometric data necessary for 3-D printing. This paper introduces a novel combination of 3-D printing and scripting through three examples of architectural surface models. In these examples, VBScript is used to write generative scripts for execution within the Rhinoceros modeling environment. The scripts produce digital geometric models which, in turn, are exported to a Z-Corp 3-D printer. The merits of this methodology are demonstrated, in one example, through models of an architectural surface composed of light-modulating conical components. The design intent in this example is a grid of responsive components which ride on a complex curved surface and steer toward a light. The written script is an explicit representation of this intention. Methods in the script use external parameters to generate a digital geometric model. The form of the subsequent printed model is calculated as a function of the initial parameters, two boundary splines and a vector indicating the orientation of the light. By varying these parameters, a set of design options can be generated and 3-D printed for comparison. The combination of scripting and 3-D printing allows complex design intentions to be managed in a concise, sharable format and modeled iteratively without manual intervention.
keywords	Generative, Scripting, Rapid Prototyping, 3-D Printing, Architectural Design
series	ACADIA
type	normal paper
email
last changed	2022/06/07 07:59

_id	eaea2003_12-matalasov
id	eaea2003_12-matalasov
authors	Matalasov, M. and Matalasov, E.
year	2004
title	Our Views on Actual Researches of 3D-modelling in Architecture
source	Spatial Simulation and Evaluation - New Tools in Architectural and Urban Design [Proceedings of the 6th European Architectural Endoscopy Association Conference / ISBN 80-227-2088-7], pp. 48-58
summary	This contribution is devoted to the brief description of the basic directions and tendencies of researches of the laboratory of video systems MARCHI. In connection with development of hardware-software computer means and their practically absolute, not alternative application in the practice of architectural designing, nowadays (not always is proved) the sphere of application of the former traditional methods of physical modeling and their connection to the endoscopic methods has been narrowed. We consider some new probable directions of development of scientific and educational work within the framework of activity of our laboratory, allowing a more balanced approach to these problems. As we have discussed, our theoretical researches and practical works must reassume an existing non-standard and controversial situation in Russia, such as established substantial intellectual potentials in scientific- and methodological researches within study processes. In addition to that, what we can use are affordable and limited physical and financial recourses and capability for technical development of works for modeling perception in designing architectural and town planning space. These initiated searches in the field of non-standard thinking, derive from our contacts with EAEA colleagues. Below we will try briefly to explain our basic principles of work development. (To be clear, some time we dismiss references and notes into exact reports from our conferences supposing that interested colleagues may get further and detailed information from already published past events).
series	EAEA
more	http://info.tuwien.ac.at/eaea
last changed	2005/09/09 10:43

_id	107caadria2004
id	107caadria2004
authors	Monchai Bunyavipakul, Raktum Sallakachat and Ekasidh Charoensilp
year	2004
title	Integrating 3D Game Engine to Online Interactive Presentation for Collaborative Design Work On Pda - Collaborative Works Anytime, Anywhere
source	CAADRIA 2004 [Proceedings of the 9th International Conference on Computer Aided Architectural Design Research in Asia / ISBN 89-7141-648-3] Seoul Korea 28-30 April 2004, pp. 107-116
doi	https://doi.org/10.52842/conf.caadria.2004.107
summary	In this research, Quake Engine on PDA (Pocket Quake) is modified and developed to make an appropriate environment for collaborative design work in the representation phase for the architectural design teams. The system is being designed for working in the centralized environment by using central server, such as when the designing team has changed 3D Model Information and uploaded to the server then the PDA client will change the same 3D Model automatically. Game Engine will be used to develop this presentation’s tool by designing new user interface and functions for working in PDA. The trial project, The Victory Monument’s Area Development Project, will make the Online Interactive Presentation by using 3D Game Engine on PDA to reconstruct around The Victory Monument in Bangkok. Hopefully, this will make the Virtual World Online anywhere, anytime being more available and give the comparison between the site existing and the new architectural form which designed on the site for good understanding about what the design answers.
series	CAADRIA
email
last changed	2022/06/07 07:58

_id	acadia04_294
id	acadia04_294
authors	Oosterhuis, Kas
year	2004
title	File to Factory and Real Time Behavior in Architecture
source	Fabrication: Examining the Digital Practice of Architecture [Proceedings of the 23rd Annual Conference of the Association for Computer Aided Design in Architecture and the 2004 Conference of the AIA Technology in Architectural Practice Knowledge Community / ISBN 0-9696665-2-7] Cambridge (Ontario) 8-14 November, 2004, 294-305
doi	https://doi.org/10.52842/conf.acadia.2004.294
summary	ONL (Oosterhuis and Lénárd) architecture is based on digital design and fabrication, whereas the design merges into fabrication in a process of direct transfer of data from a 3D modeling software to a CNC (Computer Numerically Controlled) machine. This paper describes ONL design and fabrication processes referring to three main aspects: (1) Form-Finding, (2) File to Factory, and (3) Real-Time Behavior.
keywords	Real Time Behavior, Digital Design, CNC Technologies, Programmable Architecture
series	ACADIA
email
last changed	2022/06/07 08:00

For more results click below: