Cumincad : CUMINCAD Papers : Search Results

CumInCAD is a Cumulative Index about publications in Computer Aided Architectural Design
supported by the sibling associations ACADIA, CAADRIA, eCAADe, SIGraDi, ASCAAD and CAAD futures

PDF papers
References

Hits 1 to 20 of 562

Reformat results as: short short into frame detailed detailed into frame

_id	acadia07_284
id	acadia07_284
authors	Robinson, Kirsten; Gorbet, Robert; Beesley, Philip
year	2007
title	Evolving Cooperative Behaviour in a Reflexive Membrane
source	Expanding Bodies: Art • Cities• Environment [Proceedings of the 27th Annual Conference of the Association for Computer Aided Design in Architecture / ISBN 978-0-9780978-6-8] Halifax (Nova Scotia) 1-7 October 2007, 284-293
doi	https://doi.org/10.52842/conf.acadia.2007.284
summary	This paper describes the integration of machine intelligence into an immersive architectural sculpture that interacts dynamically with users and the environment. The system is conceived to function as an architectural envelope that might transfer air using a distributed array of components. The sculpture includes a large array of interconnected miniature structural and kinetic elements, each with local sensing, actuation, and machine intelligence. We demonstrate a model in which these autonomous, interconnected agents develop cooperative behaviour to maximize airflow. Agents have access to sensory data about their local environment and ‘learn’ to move air through the working of a genetic algorithm. Introducing distributed and responsive machine intelligence builds on work done on evolving embodied intelligence (Floreano et al. 2004) and architectural ‘geotextile’ sculptures by Philip Beesley and collaborators (Beesley et al. 1996-2006). The paper contributes to the general field of interactive art by demonstrating an application of machine intelligence as a design method. The objective is the development of coherent distributed kinetic building envelopes with environmental control functions. A cultural context is included, discussing dynamic paradigms in responsive architecture.
series	ACADIA
type	normal paper
email
last changed	2022/06/07 08:00

_id	ddss2004_ra-19
id	ddss2004_ra-19
authors	Akamine, A. and A. Nélson Rodrigues da Silva
year	2004
title	An Evaluation of Neural Spatial Interaction Models Based on a Practical Application
source	Van Leeuwen, J.P. and H.J.P. Timmermans (eds.) Recent Advances in Design & Decision Support Systems in Architecture and Urban Planning, Dordrecht: Kluwer Academic Publishers, ISBN: 1-4020-2408-8, p. 19-32
summary	One of the serious problems faced by the Brazilian municipalities is the scarcity of resources for building education infrastructure. This asks for an optimal allocation of the available resources that includes, among other things, a rational spatial arrangement of the supply points (i.e., schools) in order to increase the demand coverage (i.e., students). If it is possible to foresee the regions where the demand is going to be concentrated, it is then possible to plan the location of new facilities and to assess the impact on the future level of service of the entire system. Considering that one of the consequences of the location-allocation process is the distribution of trips from demand points to supply points throughout the city, therefore affecting the overall intraurban accessibility conditions to essential services such as education, there is a strong need of models that planners can rely on to predict the future trip distribution patterns. As a result, the objective of this work was to evaluate the performance of Artificial Neural Networks (ANN) when applied to spatial interaction models, the so-called Neural Spatial Interaction Models. This was done in a practical context, in contrast to the more theoretical works commonly found in literature. The practical application showed that the neural spatial interaction model had different performances when compared to the traditional gravity models. In one case the neural models outperformed the gravity models, while on the other case it was just the opposite. The explanation for this may be in the data or in the ANN model formulation, as discussed in the conclusions.
keywords	Artificial Neural Networks, Spatial Interaction Models, Education Infrastructure
series	DDSS
last changed	2004/07/03 22:13

_id	sigradi2006_e131c
id	sigradi2006_e131c
authors	Ataman, Osman
year	2006
title	Toward New Wall Systems: Lighter, Stronger, Versatile
source	SIGraDi 2006 - [Proceedings of the 10th Iberoamerican Congress of Digital Graphics] Santiago de Chile - Chile 21-23 November 2006, pp. 248-253
summary	Recent developments in digital technologies and smart materials have created new opportunities and are suggesting significant changes in the way we design and build architecture. Traditionally, however, there has always been a gap between the new technologies and their applications into other areas. Even though, most technological innovations hold the promise to transform the building industry and the architecture within, and although, there have been some limited attempts in this area recently; to date architecture has failed to utilize the vast amount of accumulated technological knowledge and innovations to significantly transform the industry. Consequently, the applications of new technologies to architecture remain remote and inadequate. One of the main reasons of this problem is economical. Architecture is still seen and operated as a sub-service to the Construction industry and it does not seem to be feasible to apply recent innovations in Building Technology area. Another reason lies at the heart of architectural education. Architectural education does not follow technological innovations (Watson 1997), and that “design and technology issues are trivialized by their segregation from one another” (Fernandez 2004). The final reason is practicality and this one is partially related to the previous reasons. The history of architecture is full of visions for revolutionizing building technology, ideas that failed to achieve commercial practicality. Although, there have been some adaptations in this area recently, the improvements in architecture reflect only incremental progress, not the significant discoveries needed to transform the industry. However, architectural innovations and movements have often been generated by the advances of building materials, such as the impact of steel in the last and reinforced concrete in this century. There have been some scattered attempts of the creation of new materials and systems but currently they are mainly used for limited remote applications and mostly for aesthetic purposes. We believe a new architectural material class is needed which will merge digital and material technologies, embedded in architectural spaces and play a significant role in the way we use and experience architecture. As a principle element of architecture, technology has allowed for the wall to become an increasingly dynamic component of the built environment. The traditional connotations and objectives related to the wall are being redefined: static becomes fluid, opaque becomes transparent, barrier becomes filter and boundary becomes borderless. Combining smart materials, intelligent systems, engineering, and art can create a component that does not just support and define but significantly enhances the architectural space. This paper presents an ongoing research project about the development of new class of architectural wall system by incorporating distributed sensors and macroelectronics directly into the building environment. This type of composite, which is a representative example of an even broader class of smart architectural material, has the potential to change the design and function of an architectural structure or living environment. As of today, this kind of composite does not exist. Once completed, this will be the first technology on its own. We believe this study will lay the fundamental groundwork for a new paradigm in surface engineering that may be of considerable significance in architecture, building and construction industry, and materials science.
keywords	Digital; Material; Wall; Electronics
series	SIGRADI
email
last changed	2016/03/10 09:47

_id	ascaad2004_paper9
id	ascaad2004_paper9
authors	Bennadji, A.; H. Ahriz, and P. Alastair
year	2004
title	Computer Aided Sustainable Design
source	eDesign in Architecture: ASCAAD's First International Conference on Computer Aided Architectural Design, 7-9 December 2004, KFUPM, Saudi Arabia
summary	One of the most important aspects architects need to consider fairly early on is that of energy saving, cost, thermal comfort and the effect on the environment in terms of CO2 emissions. At present, during the early design stage of a building, different options are assessed using simple tools (tables, graphs and software) that contain a large number of assumptions the very nature of which can bias choice or possibly lead to an inappropriate solution. It can be argued that the only way to provide a rational assessment of options is to use calculation methods that represent in detail the physical processes involved; this usually involves the use of dynamic thermal models. Furthermore if this tool is also used during detailed design it would introduce a consistency that is normally absent from the analytical design process. Many designers are of the opinion that, because not all details are known, then such tools are not suitable for application at early stages in the design. This view can be challenged because, even at the concept stage, a great deal is known about a building. This paper aims to show that a general description of a building can be used to generate sufficient data to drive a valid analysis using a detailed thermal model at the early sketch stage of the design process. The paper describes the philosophy, methodology and the interface developed to achieve this aim. The interface guides the user through the input process using a series of screens giving options for keywords used to describe the building; comprehensive default data built into the software are then attached to these keywords. The resulting data file is a building description that is the best possible interpretation of the design intent. This can then be used to assess options and guide towards a final design.
series	ASCAAD
email
last changed	2007/04/08 19:47

_id	eaea2003_15-breen
id	eaea2003_15-breen
authors	Breen, J. and Giro, H.
year	2004
title	The DXI Experience. Ten Years of Design Visualization Developments in an Educational Laboratory Context
source	Spatial Simulation and Evaluation - New Tools in Architectural and Urban Design [Proceedings of the 6th European Architectural Endoscopy Association Conference / ISBN 80-227-2088-7], pp. 71-77
summary	Design visualisation is an essential aspect of virtually every form of design enquiry. The effects of potential environmental interventions may be simulated in order to gain the types of insights, which cannot be acquired easily from two-dimensional notations. Three-dimensional representations may be generated for very different reasons. The most direct form of design imaging is traditionally for the benefit of the designer him/herself, in order to test whether the working concepts offer fitting solutions to the complex array of design conditions such as context, programme and feasibility. Alternately, images may be generated for the benefit of communication, in order to offer insights into the expected workings of a particular proposal (possibly including alternatives). This may lead to greater understanding and possibly to reaching consensus amongst different ‘actors’ involved in the design and realisation process. In many cases the results of such visualisation studies contribute to ‘bridging the gap’ between the professionals and other parties involved more indirectly in design decision-making or the appraisal of the proposals. Designers can use distinctly different methods when going about such imaging procedures. Their choices for particular techniques may depend on their familiarity or the availability of certain media devices. Being confronted with new modelling and/or visualisation instruments can stimulate the interest in fresh approaches. In this respect, the design education environment can play an important role in not only teaching ‘proven’ applications to future designers, but also in creating a platform for the active development of innovative approaches to the design visualisation practices: education as a ‘laboratory’ for new insights and potentially a ‘breeding ground’ for the extension of the designer’s instrumentation. This contribution documents the experiences gained in some ten years within an educational application, involving active use of design driven media applications. The emphasis lies on the evolvement of techniques for eye-level imaging, whereby use can be made of different types of models: physical scale models as well as digital, virtual models. Changing attitudes towards dynamic and serial vision are considered, whereby storyboard approaches on the level of integral presentation are considered. By analysing a selection of cases and their underlying approaches an indication is given of the changing attitudes and combinations of multimedia techniques, which offer opportunities to design visualisation and communication.
series	EAEA
more	http://info.tuwien.ac.at/eaea
last changed	2005/09/09 10:43

_id	20ff
id	20ff
authors	Derix, Christian
year	2004
title	Building a Synthetic Cognizer
source	Design Computation Cognition conference 2004, MIT
summary	Understanding ‘space’ as a structured and dynamic system can provide us with insight into the central concept in the architectural discourse that so far has proven to withstand theoretical framing (McLuhan 1964). The basis for this theoretical assumption is that space is not a void left by solid matter but instead an emergent quality of action and interaction between individuals and groups with a physical environment (Hillier 1996). In this way it can be described as a parallel distributed system, a self-organising entity. Extrapolating from Luhmann’s theory of social systems (Luhmann 1984), a spatial system is autonomous from its progenitors, people, but remains intangible to a human observer due to its abstract nature and therefore has to be analysed by computed entities, synthetic cognisers, with the capacity to perceive. This poster shows an attempt to use another complex system, a distributed connected algorithm based on Kohonen’s self-organising feature maps – SOM (Kohonen 1997), as a “perceptual aid” for creating geometric mappings of these spatial systems that will shed light on our understanding of space by not representing space through our usual mechanics but by constructing artificial spatial cognisers with abilities to make spatial representations of their own. This allows us to be shown novel representations that can help us to see new differences and similarities in spatial configurations.
keywords	architectural design, neural networks, cognition, representation
series	other
type	poster
email
more	http://www.springer.com/computer/ai/book/978-1-4020-2392-7
last changed	2012/09/17 21:13

_id	2004_396
id	2004_396
authors	Fischer, Thomas
year	2004
title	Microcontroller - Enhanced Physical Models for Architectural and Product Design
source	Architecture in the Network Society [22nd eCAADe Conference Proceedings / ISBN 0-9541183-2-4] Copenhagen (Denmark) 15-18 September 2004, pp. 396-403
doi	https://doi.org/10.52842/conf.ecaade.2004.396
summary	Electronic sensors, controllers, displays and actuators can significantly enhance the value of physical models as processes of use, interaction and transformation take center stage in various fields of design. These technologies allow the development of novel computer interfaces for new kinds of interaction with virtual models, and in the future they will allow new types of active building components and materials for automated construction and dynamic runtime adaptations of inhabitable environments. However, embedding programmed logic into physical objects seems to confront designers and model makers with a steep learning curve outside the domains of their traditional expertise. The variety of alternative technologies and development tools in this area has a particularly disorienting effect on novices. Some early experiences however suggest that mastery of this learning curve is easily within reach, given some basic introduction, guidance and support. It is the purpose of this paper to provide designers with a starting point for explorations into this area, to give orientation and to demonstrate some possible development approaches and results.
keywords	Interaction, Process, High-Fidelity Models, Microcontrollers, Electronics
series	eCAADe
last changed	2022/06/07 07:51

_id	sigradi2006_e028c
id	sigradi2006_e028c
authors	Griffith, Kenfield; Sass, Larry and Michaud, Dennis
year	2006
title	A strategy for complex-curved building design:Design structure with Bi-lateral contouring as integrally connected ribs
source	SIGraDi 2006 - [Proceedings of the 10th Iberoamerican Congress of Digital Graphics] Santiago de Chile - Chile 21-23 November 2006, pp. 465-469
summary	Shapes in designs created by architects such as Gehry Partners (Shelden, 2002), Foster and Partners, and Kohn Peterson and Fox rely on computational processes for rationalizing complex geometry for building construction. Rationalization is the reduction of a complete geometric shape into discrete components. Unfortunately, for many architects the rationalization is limited reducing solid models to surfaces or data on spread sheets for contractors to follow. Rationalized models produced by the firms listed above do not offer strategies for construction or digital fabrication. For the physical production of CAD description an alternative to the rationalized description is needed. This paper examines the coupling of digital rationalization and digital fabrication with physical mockups (Rich, 1989). Our aim is to explore complex relationships found in early and mid stage design phases when digital fabrication is used to produce design outcomes. Results of our investigation will aid architects and engineers in addressing the complications found in the translation of design models embedded with precision to constructible geometries. We present an algorithmically based approach to design rationalization that supports physical production as well as surface production of desktop models. Our approach is an alternative to conventional rapid prototyping that builds objects by assembly of laterally sliced contours from a solid model. We explored an improved product description for rapid manufacture as bilateral contouring for structure and panelling for strength (Kolarevic, 2003). Infrastructure typically found within aerospace, automotive, and shipbuilding industries, bilateral contouring is an organized matrix of horizontal and vertical interlocking ribs evenly distributed along a surface. These structures are monocoque and semi-monocoque assemblies composed of structural ribs and skinning attached by rivets and adhesives. Alternative, bi-lateral contouring discussed is an interlocking matrix of plywood strips having integral joinery for assembly. Unlike traditional methods of building representations through malleable materials for creating tangible objects (Friedman, 2002), this approach constructs with the implication for building life-size solutions. Three algorithms are presented as examples of rationalized design production with physical results. The first algorithm [Figure 1] deconstructs an initial 2D curved form into ribbed slices to be assembled through integral connections constructed as part of the rib solution. The second algorithm [Figure 2] deconstructs curved forms of greater complexity. The algorithm walks along the surface extracting surface information along horizontal and vertical axes saving surface information resulting in a ribbed structure of slight double curvature. The final algorithm [Figure 3] is expressed as plug-in software for Rhino that deconstructs a design to components for assembly as rib structures. The plug-in also translates geometries to a flatten position for 2D fabrication. The software demonstrates the full scope of the research exploration. Studies published by Dodgson argued that innovation technology (IvT) (Dodgson, Gann, Salter, 2004) helped in solving projects like the Guggenheim in Bilbao, the leaning Tower of Pisa in Italy, and the Millennium Bridge in London. Similarly, the method discussed in this paper will aid in solving physical production problems with complex building forms. References Bentley, P.J. (Ed.). Evolutionary Design by Computers. Morgan Kaufman Publishers Inc. San Francisco, CA, 1-73 Celani, G, (2004) “From simple to complex: using AutoCAD to build generative design systems” in: L. Caldas and J. Duarte (org.) Implementations issues in generative design systems. First Intl. Conference on Design Computing and Cognition, July 2004 Dodgson M, Gann D.M., Salter A, (2004), “Impact of Innovation Technology on Engineering Problem Solving: Lessons from High Profile Public Projects,” Industrial Dynamics, Innovation and Development, 2004 Dristas, (2004) “Design Operators.” Thesis. Massachusetts Institute of Technology, Cambridge, MA, 2004 Friedman, M, (2002), Gehry Talks: Architecture + Practice, Universe Publishing, New York, NY, 2002 Kolarevic, B, (2003), Architecture in the Digital Age: Design and Manufacturing, Spon Press, London, UK, 2003 Opas J, Bochnick H, Tuomi J, (1994), “Manufacturability Analysis as a Part of CAD/CAM Integration”, Intelligent Systems in Design and Manufacturing, 261-292 Rudolph S, Alber R, (2002), “An Evolutionary Approach to the Inverse Problem in Rule-Based Design Representations”, Artificial Intelligence in Design ’02, 329-350 Rich M, (1989), Digital Mockup, American Institute of Aeronautics and Astronautics, Reston, VA, 1989 Schön, D., The Reflective Practitioner: How Professional Think in Action. Basic Books. 1983 Shelden, D, (2003), “Digital Surface Representation and the Constructability of Gehry’s Architecture.” Diss. Massachusetts Institute of Technology, Cambridge, MA, 2003 Smithers T, Conkie A, Doheny J, Logan B, Millington K, (1989), “Design as Intelligent Behaviour: An AI in Design Thesis Programme”, Artificial Intelligence in Design, 293-334 Smithers T, (2002), “Synthesis in Designing”, Artificial Intelligence in Design ’02, 3-24 Stiny, G, (1977), “Ice-ray: a note on the generation of Chinese lattice designs” Environmental and Planning B, volume 4, pp. 89-98
keywords	Digital fabrication; bilateral contouring; integral connection; complex-curve
series	SIGRADI
email
last changed	2016/03/10 09:52

_id	113caadria2004
id	113caadria2004
authors	Hong-Sheng Chen
year	2004
title	Case-Based Simulation As a Technique for Assisting Architectural Design
source	CAADRIA 2004 [Proceedings of the 9th International Conference on Computer Aided Architectural Design Research in Asia / ISBN 89-7141-648-3] Seoul Korea 28-30 April 2004, pp. 189-198
doi	https://doi.org/10.52842/conf.caadria.2004.189
summary	In this research, I propose a case-based simulation method for experimenting with a set of models aimed at analyzing the behavior of a dynamic system. Owing to the assistance of CBRWorks4 software, this idea is successfully tested and implemented on the Internet. A set of evacuation simulations, which model complex human behavior in a building in certain emergency situations, leads to some discoveries and conclusions.
series	CAADRIA
email
last changed	2022/06/07 07:50

_id	cf2011_p018
id	cf2011_p018
authors	Sokmenoglu, Ahu; Cagdas Gulen, Sariyildiz Sevil
year	2011
title	A Multi-dimensional Exploration of Urban Attributes by Data Mining
source	Computer Aided Architectural Design Futures 2011 [Proceedings of the 14th International Conference on Computer Aided Architectural Design Futures / ISBN 9782874561429] Liege (Belgium) 4-8 July 2011, pp. 333-350.
summary	The paper which is proposed here will introduce an ongoing research project aiming to research data mining as a methodology of knowledge discovery in urban feature analysis. To address the increasing multi-dimensional and relational complexity of urban environments requires a multidisciplinary approach to urban analysis. This research is an attempt to establish a link between knowledge discovery methodologies and automated urban feature analysis. Therefore, in the scope of this research we apply data mining methodologies for urban analysis. Data mining is defined as to extract important patterns and trends from raw data (Witten and Frank, 2005). When applied to discover relationships between urban attributes, data mining can constitute a methodology for the analysis of multi-dimensional relational complexity of urban environments (Gil, Montenegro, Beirao and Duarte, 2009) The theoretical motivation of the research is derived by the lack of explanatory urban knowledge which is an issue since 1970‚Äôs in the area of urban research. This situation is mostly associated with deductive methods of analysis. The analysis of urban system from the perspective of few interrelated factors, without considering the multi-dimensionality of the system in a deductive fashion was not been explanatory enough. (Jacobs, 1961, Lefebvre, 1970 Harvey, 1973) To address the multi-dimensional and relational complexity of urban environments requires the consideration of diverse spatial, social, economic, cultural, morphological, environmental, political etc. features of urban entities. The main claim is that, in urban analysis, there is a need to advance from traditional one dimensional (Marshall, 2004) description and classification of urban forms (e.g. Land-use maps, Density maps) to the consideration of the simultaneous multi-dimensionality of urban systems. For this purpose, this research proposes a methodology consisting of the application of data mining as a knowledge discovery method into a GIS based conceptual urban database built out of official real data of Beyoglu. Generally, the proposed methodology is a framework for representing and analyzing urban entities represented as objects with properties (attributes). It concerns the formulation of an urban entity‚Äôs database based on both available and non-available (constructed from available data) data, and then data mining of spatial and non-spatial attributes of the urban entities. Location or position is the primary reference basis for the data that is describing urban entities. Urban entities are; building floors, buildings, building blocks, streets, geographically defined districts and neighborhoods etc. Urban attributes are district properties of locations (such as land-use, land value, slope, view and so forth) that change from one location to another. Every basic urban entity is unique in terms of its attributes. All the available qualitative and quantitative attributes that is relavant (in the mind of the analyst) and appropriate for encoding, can be coded inside the computer representation of the basic urban entity. Our methodology is applied by using the real and official, the most complex, complete and up-to-dataset of Beyoglu (a historical neighborhood of Istanbul) that is provided by the Istanbul Metropolitan Municipality (IBB). Basically, in our research, data mining in the context of urban data is introduced as a computer based, data-driven, context-specific approach for supporting analysis of urban systems without relying on any existing theories. Data mining in the context of urban data; ‚Ä¢ Can help in the design process by providing site-specific insight through deeper understanding of urban data. ‚Ä¢ Can produce results that can assist architects and urban planners at design, policy and strategy levels. ‚Ä¢ Can constitute a robust scientific base for rule definition in urban simulation applications such as urban growth prediction systems, land-use simulation models etc. In the paper, firstly we will present the framework of our research with an emphasis on its theoretical background. Afterwards we will introduce our methodology in detail and finally we will present some of important results of data mining analysis processed in Rapid Miner open-source software. Specifically, our research define a general framework for knowledge discovery in urban feature analysis and enable the usage of GIS and data mining as complementary applications in urban feature analysis. Acknowledgments I would like to thank to Nuffic, the Netherlands Organization for International Cooperation in Higher Education, for funding of this research. I would like to thank Ceyhun Burak Akgul for his support in Data Mining and to H. Serdar Kaya for his support in GIS.
keywords	urban feature analysis, data mining, urban database, urban complexity, GIS
series	CAAD Futures
email
last changed	2012/02/11 19:21

_id	acadia04_282
id	acadia04_282
authors	Anders, Peter
year	2004
title	Arch-OS: An Implementation of Cybrid Strategies
source	Fabrication: Examining the Digital Practice of Architecture [Proceedings of the 23rd Annual Conference of the Association for Computer Aided Design in Architecture and the 2004 Conference of the AIA Technology in Architectural Practice Knowledge Community / ISBN 0-9696665-2-7] Cambridge (Ontario) 8-14 November, 2004, 282-293
doi	https://doi.org/10.52842/conf.acadia.2004.282
summary	A review of the literature on Intelligent Buildings suggests an ideal of a building as an autonomous system that controls its internal and external environments. The model, whose origin lies with early models of artificial intelligence, effectively treats the building as a slave to human needs, and appears to invest more intelligence in the building than in its occupants. This paper proposes that automated environments be understood as extensions of human sense and awareness. It describes an operating system, Arch-OS, that exemplifies this approach by increasing building occupants’ consciousness of their environment.
keywords	Cybrid, Mixed Reality, Responsive Environment, Planetary Collegium
series	ACADIA
email
last changed	2022/06/07 07:54

_id	acadia04_186
id	acadia04_186
authors	Bell, Bradley
year	2004
title	Digital Tectonics: Structural Patterning of Surface Morphology
source	Fabrication: Examining the Digital Practice of Architecture [Proceedings of the 23rd Annual Conference of the Association for Computer Aided Design in Architecture and the 2004 Conference of the AIA Technology in Architectural Practice Knowledge Community / ISBN 0-9696665-2-7] Cambridge (Ontario) 8-14 November, 2004, 186-201
doi	https://doi.org/10.52842/conf.acadia.2004.186
summary	The computer in architectural design has shifted from its role as a merely representational device to that of a tool for instrumentalized simulation and fabrication. The desire to make buildings look like a rendering, or to produce photo-realistic images and walkthroughs has given way to an opening of the potentials of software to assist the designer with managing complex geometries, parametric organizational diagrams, structural analysis, and integrated building systems. Simulation has become the means by which virtual space becomes more than just a mirror of reality. It becomes the space within which different potential realities can be tested and evaluated before they are materially implemented. In architecture, information derived from material constraints to site conditions can be constantly fed into the computer models to provide an accurate update, which in turn introduces feedback into the overall design, and change can then be registered in the detail.
keywords	surface, patterns, structure, CAD/CAM, fabrication
series	ACADIA
email
last changed	2022/06/07 07:54

_id	acadia11_138
id	acadia11_138
authors	Buell, Samantha; Shaban, Ryan; Corte, Daniel; Beorkrem, Christopher
year	2011
title	Zero-waste, Flat Pack Truss Work: An Investigation of Responsive Structuralism
source	ACADIA 11: Integration through Computation [Proceedings of the 31st Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA)] [ISBN 978-1-6136-4595-6] Banff (Alberta) 13-16 October, 2011, pp. 138-143
doi	https://doi.org/10.52842/conf.acadia.2011.138
summary	The direct and rapid connections between scripting, modeling and prototyping allow for investigations of computation in fabrication. The manipulation of planar materials with two-dimensional CNC cuts can easily create complex and varied forms, volumes, and surfaces. However, the bulk of research on folding using CNC fabrication tools is focused upon surfaces, self-supporting walls and shell structures, which do not integrate well into more conventional building construction models.This paper attempts to explain the potential for using folding methodologies to develop structural members through a design-build process. Conventional building practice consists of the assembly of off-the-shelf parts. Many times, the plinth, skeleton, and skin are independently designed and fabricated, integrating multiple industries. Using this method of construction as an operative status quo, this investigation focused on a single structural component: the truss. A truss is defined as: “A triangulated arrangement of structural members that reduces nonaxial external forces to a set of axial forces in its members.” (Allen and Iano 2004)Using folding methodologies and sheet steel to create a truss, this design investigation employed a recyclable and prolific building material to redefine the fabrication of a conventional structural member. The potential for using digital design and two-dimensional CNC fabrication tools in the design of a foldable truss from sheet steel is viable in the creation of a flat-packed, minimal waste structural member that can adapt to a variety of aesthetic and structural conditions. Applying new methods to a component of the conventional ‘kit of parts’ allowed for a novel investigation that recombines zero waste goals, flat-packing potential, structural expression and computational processes.
series	ACADIA
type	normal paper
email
last changed	2022/06/07 07:54

_id	ijac20075402
id	ijac20075402
authors	Burry, Jane R.
year	2007
title	Mindful Spaces: Computational Geometry and the Conceptual Spaces in which Designers Operate
source	International Journal of Architectural Computing vol. 5 - no. 4, pp. 611-624
summary	Combinatorial computational geometry, while dealing with geometric objects as discrete entities, provides the means both to analyse and to construct relationships between these objects and relate them to other non-geometrical entities. This paper explores some ways in which this may be used in design through a review of six, one-semester-long design explorations by undergraduate and postgraduate students in the Flexible Modeling for Design and Prototyping course between 2004 and 2007. The course focuses on using computational geometry firstly to construct topologically defined design models based on graphs of relationships between objects (parametric design,) and concurrently to output physical prototypes from these "flexible models"(an application of numerical computational geometry). It supports students to make early design explorations. Many have built flexible models to explore design iterations for a static spatial outcome. Some have built models of real time responsive dynamic systems. In this educational context, computational geometry has enabled a range of design iterations that would have been challenging to uncover through physical analogue means alone. It has, perhaps more significantly, extended the students' own concept of the space in which they design.
series	journal
email
last changed	2008/02/25 20:30

_id	0131
id	0131
authors	Chiarella, Mauro
year	2004
title	GEOMETRY AND ARCHITECTURE: NURBS, DESIGN AND CONSTRUCTION
source	Proceedings of the Fourth International Conference of Mathematics & Design, Special Edition of the Journal of Mathematics & Design, Volume 4, No.1, pp. 135-139.
summary	Geometry regarded as a tool for understanding is perhaps the part of Mathematics which is the most intuitive, concrete and linked to reality. From its roots as a tool to describe and measure shapes, geometry as ‘the space science’ , has grown towards a theory of ideas and methods by means of which it is possible to build and study idealised models, not only from the physical world but also from the real world. In graphic architecture thought, geometry usually appears as an instrumental support for project speculation. Geometric procedures are presented as representational resources for the graphic testing of reflection and for the exposition of ideas in order to build a logical order as regards representation and formal prefiguration. The fast rise of computing in the last decades has made it possible for architects to work massively and in a graphic and intuitive way with mathematical representations of tridimensional geometry, such as the NURBS . These organic surfaces of free shapes defined by vectorial curves have allowed access to a rapid generation of complex shapes with a minumum amount of data and of specific knowledge. The great development of modelling achieved by the digital media and the limitations in the technical and building areas and in the existence of materials which are coherent with the resultant shapes reveal a considerable distance between the systems of ideation and simulation characteristic of the computing era and the analogous systems of production inherited from the slow industrial development. This distance has been shortened by CAD/CAM systems, which are, however, not very accessible to the architectural field. If we incorporate to the development of these divergent media the limitations which are distinctive of the material resources and procedures of the existent local technology, the aforementioned distance seems even greater. Assuming the metaphor of living at the threshold of two ages (industrial-computing, analogical-digital, material-virtual) and the challenge of the new conceptual and operational tools in our field, we work in the mixture, with no exclusions or substitutions, proposing (by means of the development of informational complements) some alternatives of work to approach the issue under discussion from the Architecture Workshop.
keywords	Geometry, Design, NURBS, Unfolding, Pedagogy
series	other
type	normal paper
email
last changed	2005/04/07 12:51

_id	disschoo
id	disschoo
authors	Choo, Seung Yeon
year	2004
title	STUDY ON COMPUTER-AIDED DESIGN SUPPORT OF TRADITIONAL ARCHITECTURAL THEORIES
source	Technische Universität München
summary	The research presented in this thesis describes a computer-aided design support of traditional architectural theories. Traditional architectural theories in western architecture have been considered as a basis for answering the fundamental questions of architecture: proportion, symmetry, colour, harmony and so on. In particular, the aesthetic aspect of these theories has been one of many important architectural aspects, and which is concerned with the field of architecture in determining the beauty of architectural form. The most significant role of the traditional theories in architecture is to maintain unity, to avoid chaos and then to achieve harmony in a design, using some specific design principles. However, current technology-guided constructions tend to neglect often the importance of these theories due to the standardization of building elements, due to mechanically-prepared construction and the reducing completion costs, etc. Thus, this research proposes a design support system as a design assistant that gives an intelligent advice on architectural design, using analytical design- and ordering- principles of traditional theories for the optimization of the architectural design from the aesthetic perspective. To evaluate the aesthetic quality of an architectural design, this system is implemented in the AutoCAD environment, using the AutoLISP. It is applied so as to explain and develop aesthetic qualities of a design. Designs proposed by this system include optimum designs, which are based on the traditional architectural theories, and new ones which can be in future connected to information models. To do this, the definition of information about building elements is accomplished by using the neutral format EXPRESS and EXPRESS-G for such application systems. The results of the application system are presented, such as the easily generating and quickly conceptualising of an object model, the checking of the aesthetic value of the design during the various design phases, the helping to find direction during rational searching for a solution. The user can easily appreciate the usefulness of the proposed system as a set of tools for searching for rational architectural aesthetics and formal solutions at different design-stages. It is to be hoped that a new "traditional" fundamental of architecture, such as the proposed system, incorporating CAAD systems, will find its place among new technological methods in the AEC industry and so help to bridge the gap between the value of traditional architecture and CAAD systems.
keywords	Aesthetics, Design Theory, Order Principle, Product Model, IFC, AutoCAD/AutoLISP
series	thesis:PhD
type	normal paper
email
more	http://tumb1.biblio.tu-muenchen.de/publ/diss/ar/2004/choo.html
last changed	2004/05/23 07:05

_id	506b
id	506b
authors	Christenson, Mike
year	2009
title	Testing the relevance of parameterization to architectural epistemology
source	Architectural Science Review, Volume 52.2: 135-141
summary	Advances in building information modeling (BIM) deeply impact the production of new architecture; its benefits are obvious and its acceptance widespread. But how does BIM impact the study of existing architecture? Can BIM be assumed to operate as a neutral framework, equally applicable to the study of architecture anywhere? Using as a point of departure a recent outline of the conceptual structure of parametric modeling prepared by Sacks, Eastman, and Lee (2004), this paper compares parametric models of two existing works of architecture: Mies van der Rohe’s Crown Hall and Peter Zumthor’s St. Benedict Chapel. The processes of parametrically modeling each building are specifically compared in two ways: first, parameters are established for each model; second, each model is "flexed" as a means of disclosing possible semantic relationships within each work of architecture. Because each building demands a different parameter-establishment strategy, and because the models permit different degrees of flexibility, the comparison illustrates the shortcomings of a "neutral framework" assumption to an architectural epistemology.
keywords	Existing architecture, Parametric modeling, Representation
series	journal paper
type	normal paper
email
more	http://www.earthscanjournals.com/asre/052/asre0520135.htm
last changed	2009/06/18 14:24

_id	507caadria2004
id	507caadria2004
authors	Christiane M. Herr, Thomas Fischer
year	2004
title	Using Hardware Cellular Automata to Simulate Use in Adaptive Architecture
source	CAADRIA 2004 [Proceedings of the 9th International Conference on Computer Aided Architectural Design Research in Asia / ISBN 89-7141-648-3] Seoul Korea 28-30 April 2004, pp. 815-828
doi	https://doi.org/10.52842/conf.caadria.2004.815
summary	In this paper we give an account of our development of a hardware machine-readable cellular automata model for simulating dynamic patterns of use and adaptation in vernacular high-density architecture. In a hypothetical architectural setting that draws its formal expression from illegal façade extensions in Hong Kong and its conceptual framework from the Open Building movement, we examine state evolutions in monotonous matrices of adaptable residential units. The primary objective is to gain a better understanding not only of architectural form but also of dynamic processes in the built environment and hence of the factors that cause adaptive architectures to tend towards different types of overall attractor states. The paper gives a discussion of the project’s theoretical background as well as a detailed description of the hardware model and its modes of application.
series	CAADRIA
email
last changed	2022/06/07 07:56

_id	ddss2004_ra-145
id	ddss2004_ra-145
authors	Devisch, O.T.J., H.J.P. Timmermans, T.A. Arentze, and A.W.J. Borgers
year	2004
title	Towards a Generic MultiAgent Engine for the Simulation of Spatial Behavioural Processes
source	Van Leeuwen, J.P. and H.J.P. Timmermans (eds.) Recent Advances in Design & Decision Support Systems in Architecture and Urban Planning, Dordrecht: Kluwer Academic Publishers, ISBN: 1-4020-2408-8, p. 145-160
summary	SwarmCity is being developed as a micro-simulation model, simulating the location-choice behaviour of a population of households, retailers, firms, developers, etc. reacting to an urban plan. The focus of SwarmCity lies –in a first phase- on the decision-making procedures of households, conceptualised as a series of three processes: awakening, search and choice. The methodology used to implement these processes makes use of life-time utility and decisionanalysis trees. The final model should work as a scenario-analysis tool, allowing planners, developers, retailers and municipalities to test interventionproposals, to evaluate legislations, to measure the attractiveness of services, to quantify residential mobility, etc. This paper illustrates the state of the art in household location-choice modelling and introduces a first attempt in developing a conceptual framework.
keywords	Micro Simulation, Multi-Agent Systems, Spatial Simulation Models, Scenario Analysis, Heuristic Decision-Making, Location-Choice Behaviour, DecisionAnalysis Trees, Residential Mobility, Lifetime Utility
series	DDSS
last changed	2004/07/03 22:13

_id	ascaad2004_paper19
id	ascaad2004_paper19
authors	Donath, Dirk; Christian Tonn
year	2004
title	Plausibility in Architectural Design: Software Support for the Architect-Oriented Design of Colour Schemes for Interiors and Buildings
source	eDesign in Architecture: ASCAAD's First International Conference on Computer Aided Architectural Design, 7-9 December 2004, KFUPM, Saudi Arabia
summary	The approach discussed here is part of research into an overall concept for digital instruments which support the entire planning process and help in enabling planning decisions to be based upon clear reasoning and plausible arguments. The paper describes a plausibility instrument for the formulation of colour scheme proposals for building interiors and elevations. With the help of intuitively usable light simulations, colour, material and spatial concepts can be assessed realistically. The software prototype “Coloured Architecture” is conceived as a professional extension to conventional design tools for the modelling of buildings. As such it can be used by the architect in the earliest design phases of the planning process as well as for colour implementation on location.
series	ASCAAD
email
last changed	2007/04/08 19:47

For more results click below: