Cumincad : CUMINCAD Papers : Search Results

CumInCAD is a Cumulative Index about publications in Computer Aided Architectural Design
supported by the sibling associations ACADIA, CAADRIA, eCAADe, SIGraDi, ASCAAD and CAAD futures

PDF papers
References

Hits 1 to 20 of 559

Reformat results as: short short into frame detailed detailed into frame

_id	acadia04_088
id	acadia04_088
authors	Bechthold, Martin
year	2004
title	Digital Design and Fabrication of Surface Structures
source	Fabrication: Examining the Digital Practice of Architecture [Proceedings of the 23rd Annual Conference of the Association for Computer Aidd Design in Architecture and the 2004 Conference of the AIA Technology in Architectural Practice Knowledge Community / ISBN 0-9696665-2-7] Cambridge (Ontario) 8-14 November, 2004, 88-99
doi	https://doi.org/10.52842/conf.acadia.2004.088
summary	This paper presents a study in digital design and manufacturing of shells, which are material-efficient systems that generate their load-bearing capacity through curvature. Their complex shapes are challenging to build, and the few current shell projects employ the same shape repetitively in order to reduce the cost of concrete formwork. Can digital design and manufacturing technology make these systems suitable for the needs of the 21st century? The research developed new digitally-driven fabrication processes for Wood-Foam Sandwich Shells and Ferrocement-Concrete Sandwich Shells. These are partially pre-fabricated in order to allow for the application of Computer-Numerically Controlled (CNC) technology. Sandwich systems offer advantages for the digitally-enabled construction of shells, while at the same time improving their structural and thermal performance. The research defines design and manufacturing processes that reduce the need for repetition in order to save costs. Wood-Foam Sandwich shells are made by laminating wood-strips over a CNC-milled foam mold that eventually becomes the structural sandwich core. For Ferrocement-Concrete sandwich shells, a two-stage process is presented: pre-fabricated ferrocement panels become the permanent formwork for a cast-in-place concrete shell. The design and engineering process is facilitated through the use of parametric solid modeling environments. Modeling macros and integrated Finite-Element Analysis tools streamline the design process. Accuracy in fabrication is maintained by using CNC techniques for the majority of the shaping processes. The digital design and manufacturing parameters for each process are verified through design and fabrication studies that include prototypes, mockups and physical scale models.
keywords	Shell, Pre-Fabrication, Prototype, Custom-Manufacturing, Simulation
series	ACADIA
email
last changed	2022/06/07 07:54

_id	acadia11_138
id	acadia11_138
authors	Buell, Samantha; Shaban, Ryan; Corte, Daniel; Beorkrem, Christopher
year	2011
title	Zero-waste, Flat Pack Truss Work: An Investigation of Responsive Structuralism
source	ACADIA 11: Integration through Computation [Proceedings of the 31st Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA)] [ISBN 978-1-6136-4595-6] Banff (Alberta) 13-16 October, 2011, pp. 138-143
doi	https://doi.org/10.52842/conf.acadia.2011.138
summary	The direct and rapid connections between scripting, modeling and prototyping allow for investigations of computation in fabrication. The manipulation of planar materials with two-dimensional CNC cuts can easily create complex and varied forms, volumes, and surfaces. However, the bulk of research on folding using CNC fabrication tools is focused upon surfaces, self-supporting walls and shell structures, which do not integrate well into more conventional building construction models.This paper attempts to explain the potential for using folding methodologies to develop structural members through a design-build process. Conventional building practice consists of the assembly of off-the-shelf parts. Many times, the plinth, skeleton, and skin are independently designed and fabricated, integrating multiple industries. Using this method of construction as an operative status quo, this investigation focused on a single structural component: the truss. A truss is defined as: “A triangulated arrangement of structural members that reduces nonaxial external forces to a set of axial forces in its members.” (Allen and Iano 2004)Using folding methodologies and sheet steel to create a truss, this design investigation employed a recyclable and prolific building material to redefine the fabrication of a conventional structural member. The potential for using digital design and two-dimensional CNC fabrication tools in the design of a foldable truss from sheet steel is viable in the creation of a flat-packed, minimal waste structural member that can adapt to a variety of aesthetic and structural conditions. Applying new methods to a component of the conventional ‘kit of parts’ allowed for a novel investigation that recombines zero waste goals, flat-packing potential, structural expression and computational processes.
series	ACADIA
type	normal paper
email
last changed	2022/06/07 07:54

_id	506b
id	506b
authors	Christenson, Mike
year	2009
title	Testing the relevance of parameterization to architectural epistemology
source	Architectural Science Review, Volume 52.2: 135-141
summary	Advances in building information modeling (BIM) deeply impact the production of new architecture; its benefits are obvious and its acceptance widespread. But how does BIM impact the study of existing architecture? Can BIM be assumed to operate as a neutral framework, equally applicable to the study of architecture anywhere? Using as a point of departure a recent outline of the conceptual structure of parametric modeling prepared by Sacks, Eastman, and Lee (2004), this paper compares parametric models of two existing works of architecture: Mies van der Rohe’s Crown Hall and Peter Zumthor’s St. Benedict Chapel. The processes of parametrically modeling each building are specifically compared in two ways: first, parameters are established for each model; second, each model is "flexed" as a means of disclosing possible semantic relationships within each work of architecture. Because each building demands a different parameter-establishment strategy, and because the models permit different degrees of flexibility, the comparison illustrates the shortcomings of a "neutral framework" assumption to an architectural epistemology.
keywords	Existing architecture, Parametric modeling, Representation
series	journal paper
type	normal paper
email
more	http://www.earthscanjournals.com/asre/052/asre0520135.htm
last changed	2009/06/18 14:24

_id	sigradi2006_e028c
id	sigradi2006_e028c
authors	Griffith, Kenfield; Sass, Larry and Michaud, Dennis
year	2006
title	A strategy for complex-curved building design:Design structure with Bi-lateral contouring as integrally connected ribs
source	SIGraDi 2006 - [Proceedings of the 10th Iberoamerican Congress of Digital Graphics] Santiago de Chile - Chile 21-23 November 2006, pp. 465-469
summary	Shapes in designs created by architects such as Gehry Partners (Shelden, 2002), Foster and Partners, and Kohn Peterson and Fox rely on computational processes for rationalizing complex geometry for building construction. Rationalization is the reduction of a complete geometric shape into discrete components. Unfortunately, for many architects the rationalization is limited reducing solid models to surfaces or data on spread sheets for contractors to follow. Rationalized models produced by the firms listed above do not offer strategies for construction or digital fabrication. For the physical production of CAD description an alternative to the rationalized description is needed. This paper examines the coupling of digital rationalization and digital fabrication with physical mockups (Rich, 1989). Our aim is to explore complex relationships found in early and mid stage design phases when digital fabrication is used to produce design outcomes. Results of our investigation will aid architects and engineers in addressing the complications found in the translation of design models embedded with precision to constructible geometries. We present an algorithmically based approach to design rationalization that supports physical production as well as surface production of desktop models. Our approach is an alternative to conventional rapid prototyping that builds objects by assembly of laterally sliced contours from a solid model. We explored an improved product description for rapid manufacture as bilateral contouring for structure and panelling for strength (Kolarevic, 2003). Infrastructure typically found within aerospace, automotive, and shipbuilding industries, bilateral contouring is an organized matrix of horizontal and vertical interlocking ribs evenly distributed along a surface. These structures are monocoque and semi-monocoque assemblies composed of structural ribs and skinning attached by rivets and adhesives. Alternative, bi-lateral contouring discussed is an interlocking matrix of plywood strips having integral joinery for assembly. Unlike traditional methods of building representations through malleable materials for creating tangible objects (Friedman, 2002), this approach constructs with the implication for building life-size solutions. Three algorithms are presented as examples of rationalized design production with physical results. The first algorithm [Figure 1] deconstructs an initial 2D curved form into ribbed slices to be assembled through integral connections constructed as part of the rib solution. The second algorithm [Figure 2] deconstructs curved forms of greater complexity. The algorithm walks along the surface extracting surface information along horizontal and vertical axes saving surface information resulting in a ribbed structure of slight double curvature. The final algorithm [Figure 3] is expressed as plug-in software for Rhino that deconstructs a design to components for assembly as rib structures. The plug-in also translates geometries to a flatten position for 2D fabrication. The software demonstrates the full scope of the research exploration. Studies published by Dodgson argued that innovation technology (IvT) (Dodgson, Gann, Salter, 2004) helped in solving projects like the Guggenheim in Bilbao, the leaning Tower of Pisa in Italy, and the Millennium Bridge in London. Similarly, the method discussed in this paper will aid in solving physical production problems with complex building forms. References Bentley, P.J. (Ed.). Evolutionary Design by Computers. Morgan Kaufman Publishers Inc. San Francisco, CA, 1-73 Celani, G, (2004) “From simple to complex: using AutoCAD to build generative design systems” in: L. Caldas and J. Duarte (org.) Implementations issues in generative design systems. First Intl. Conference on Design Computing and Cognition, July 2004 Dodgson M, Gann D.M., Salter A, (2004), “Impact of Innovation Technology on Engineering Problem Solving: Lessons from High Profile Public Projects,” Industrial Dynamics, Innovation and Development, 2004 Dristas, (2004) “Design Operators.” Thesis. Massachusetts Institute of Technology, Cambridge, MA, 2004 Friedman, M, (2002), Gehry Talks: Architecture + Practice, Universe Publishing, New York, NY, 2002 Kolarevic, B, (2003), Architecture in the Digital Age: Design and Manufacturing, Spon Press, London, UK, 2003 Opas J, Bochnick H, Tuomi J, (1994), “Manufacturability Analysis as a Part of CAD/CAM Integration”, Intelligent Systems in Design and Manufacturing, 261-292 Rudolph S, Alber R, (2002), “An Evolutionary Approach to the Inverse Problem in Rule-Based Design Representations”, Artificial Intelligence in Design ’02, 329-350 Rich M, (1989), Digital Mockup, American Institute of Aeronautics and Astronautics, Reston, VA, 1989 Schön, D., The Reflective Practitioner: How Professional Think in Action. Basic Books. 1983 Shelden, D, (2003), “Digital Surface Representation and the Constructability of Gehry’s Architecture.” Diss. Massachusetts Institute of Technology, Cambridge, MA, 2003 Smithers T, Conkie A, Doheny J, Logan B, Millington K, (1989), “Design as Intelligent Behaviour: An AI in Design Thesis Programme”, Artificial Intelligence in Design, 293-334 Smithers T, (2002), “Synthesis in Designing”, Artificial Intelligence in Design ’02, 3-24 Stiny, G, (1977), “Ice-ray: a note on the generation of Chinese lattice designs” Environmental and Planning B, volume 4, pp. 89-98
keywords	Digital fabrication; bilateral contouring; integral connection; complex-curve
series	SIGRADI
email
last changed	2016/03/10 09:52

_id	ijac20032207
id	ijac20032207
authors	Liapi, Katherine A.; Kim, Jinman
year	2004
title	A Parametric Approach to the Design of Vaulted Tensegrity Networks
source	International Journal of Architectural Computing vol. 2 - no. 2
summary	Significant new research in tensegrity theory and technology encourages tensegrity’s implementation in architecture. A recently developed technology makes possible the rapid modular assembly of deployable tensegrity units, and the construction of alternate curved configurations by re-using the same modules. Although a form exploration method for tensegrity structures already exists, estimating the structure’s new geometry remains a challenge due to difficulties designers encounter in understanding and following the method’s geometric construction process. Besides, the method doesn’t address the geometry of vaulted configurations. This paper presents algorithms that link together the geometric parameters that determine the shape of tensegrity vaults by addressing different design-construction scenarios, and a software code that generates parametric models of tensegrity vaulted structures.The application of the algorithms to the morphological study of a tensegrity vaulted dome, which constituted the main feature of an entry to arecent international architectural competition, is also presented.
series	other
type	normal paper
more	http://www.multi-science.co.uk/ijac.htm
last changed	2010/05/16 09:13

_id	041226_ribaudo-m
id	041226_ribaudo-m
authors	Ribaudo,
year	2004
title	Parametric Construction Stylesheets
source	ETH postgraduate studies final thesis, Zurich
summary	The present thesis is centred on the use of programmed tools as alternative or as support of the classical computer aided architectural design methods.This thesis shows among other things how were programmed/generated the mathematical descriptions of the frames, the joints and the production drawings using MEL (Maya Embedded Language).Further will be discussed pros and cons of the imported and exported digital data structures for their respective purpose like the generation of the joint details, the model visualizations, the different prototypes and the generation of the construction stylesheets.The result of this work will be shown by visualizations of digital models as well as by using rapid prototyping methods and CNC machines.Moreover this thesis will deal with the programming of stylesheets which were used to generate variants of constructions.The NDS2004 prototype represents such a variant and was produced with the above mentioned programmed tools.
series	thesis:MSc
last changed	2005/09/09 12:58

_id	ijac20075402
id	ijac20075402
authors	Burry, Jane R.
year	2007
title	Mindful Spaces: Computational Geometry and the Conceptual Spaces in which Designers Operate
source	International Journal of Architectural Computing vol. 5 - no. 4, pp. 611-624
summary	Combinatorial computational geometry, while dealing with geometric objects as discrete entities, provides the means both to analyse and to construct relationships between these objects and relate them to other non-geometrical entities. This paper explores some ways in which this may be used in design through a review of six, one-semester-long design explorations by undergraduate and postgraduate students in the Flexible Modeling for Design and Prototyping course between 2004 and 2007. The course focuses on using computational geometry firstly to construct topologically defined design models based on graphs of relationships between objects (parametric design,) and concurrently to output physical prototypes from these "flexible models"(an application of numerical computational geometry). It supports students to make early design explorations. Many have built flexible models to explore design iterations for a static spatial outcome. Some have built models of real time responsive dynamic systems. In this educational context, computational geometry has enabled a range of design iterations that would have been challenging to uncover through physical analogue means alone. It has, perhaps more significantly, extended the students' own concept of the space in which they design.
series	journal
email
last changed	2008/02/25 20:30

_id	2004_248
id	2004_248
authors	Chang, Teng-Wen and Woodbury, Robert F.
year	2004
title	GEOMETRY IN HIGHLY STRUCTURED DESIGN SPACES
source	Architecture in the Network Society [22nd eCAADe Conference Proceedings / ISBN 0-9541183-2-4] Copenhagen (Denmark) 15-18 September 2004, pp. 248-254
doi	https://doi.org/10.52842/conf.ecaade.2004.248
summary	The Australian branch of the SEED project created a new formalism for design spaces in which the fundamental structuring operator is information specificity, formally characterised as subsumption. Here design space navigation is composed as combinations of the primitive operators of resolution, unification, anti-unification, search, query and hysterical undo. The structures needed to support such a view are highly constrained in a mathematical sense and it is in these constraints that the problems for representation of geometry arise. The research challenge is to add the formal design space exploration constraints into an existing geometric representation scheme or alternatively to discover a new scheme in which the constraints are realized. Based on Typed Feature Structures (TFS), Geometric Typed Feature Structures (GTFS) are a representation scheme and method for performing the basic design space exploration operations on geometric objects. The crucial insight behind extending TFS to geometry is to discover useful algebraic structures of geometric objects affording the mathematics required of TFS. In this paper we describe Geometric Typed Feature Structures through one example of form: IOPSet. Our method of exposition is both mathematical and graphical: for each structure we will demonstrate both how it meets the necessary formal conditions as well as the sorts of form-sculpting operations it enables. An architectural example: insulated enclosure is used as a demonstration of subsumption operations over IOPSet. One alternative description of insulated enclosure using GTFS is also shown in the paper.
keywords	Geometric Typed Feature Structures, SEED, Design Space Explorer, Geometric Design Information
series	eCAADe
type	normal paper
email
last changed	2022/06/07 07:56

_id	ijac20032206
id	ijac20032206
authors	Cory Clarke; Phillip Anzalone
year	2004
title	Trusset: Parallel Development of Software and Construction Systems for Space-Truss Structures
source	International Journal of Architectural Computing vol. 2 - no. 2
summary	This paper documents our current progress on theparallel development of a building system andcorresponding agent-based software design tools;together the two produce a seamless pipeline fromdesign to fabrication and assembly. The building systemis a clad differential space-truss designed forfabrication entirely with computer numericallycontrolled (CNC) linear cutting devices such as CNClaser cutters or two-axis mills. The softwarecomponent is a set of agent-based design tools fordeveloping surfaces and envelopes formally suitable tobe built using our space-truss system.
series	journal
email
more	http://www.multi-science.co.uk/ijac.htm
last changed	2007/03/04 07:08

_id	acadia04_076
id	acadia04_076
authors	Hanna, Sean
year	2004
title	Modularity and Flexibility at the Small Scale: Evolving Continuous Material Variation with Stereolithography
source	Fabrication: Examining the Digital Practice of Architecture [Proceedings of the 23rd Annual Conference of the Association for Computer Aided Design in Architecture and the 2004 Conference of the AIA Technology in Architectural Practice Knowledge Community / ISBN 0-9696665-2-7] Cambridge (Ontario) 8-14 November, 2004, 76-87
doi	https://doi.org/10.52842/conf.acadia.2004.076
summary	In this paper, we introduce a technique by which the internal material properties of an object can be optimised at a microstructural level (5x10-5m) to counteract the forces that are applied to it. These can then be fabricated using the rapid prototyping method of stereolithography. The proposed technique is analogous to principles of mass customization and takes advantage of a flexible module to create complex structures in a manner that is computationally efficient and effective. The process is two-staged, in which a genetic algorithm evolves the topology of the microstructure and a second algorithm incorporating Finite Element Analysis then optimises the geometry. The examples shown are designed specifically for the fabrication technique, but the method and general principles are applicable to structural problems at any scale.
keywords	genetic algorithm, rapid prototyping, stereolithography, materials
series	ACADIA
email
last changed	2022/06/07 07:50

_id	acadia03_040
id	acadia03_040
authors	Katherine A. Liapi, Katherine A. and Kim, Jinman
year	2003
title	A Parametric Approach to the Design of a Tensegrity Vaulted Dome for an Ephemeral Structure for the 2004 Olympics
source	Connecting >> Crossroads of Digital Discourse [Proceedings of the 2003 Annual Conference of the Association for Computer Aided Design In Architecture / ISBN 1-880250-12-8] Indianapolis (Indiana) 24-27 October 2003, pp. 301-309
doi	https://doi.org/10.52842/conf.acadia.2003.301
summary	Tensegrity, defined as “tensional integrity,” is central to the design of a semi-open exhibition space that was submitted as an entry to the international competition for the design of “Ephemeral Structures for the City of Athens,” in the context of the 2004 Olympic Games. The main feature of the proposed exhibition space is a vaulted dome composed of interconnected detachable and deployable tensegrity units. The most challenging aspect in the design of the tensegrity vault was the generation of alternative spatial configurations for form exploration and study. For this purpose a mathematical code has been developed that links all the parameters that affect the design of tensegrity vaults. The code also allows for the parametric graphical generation of the vault by displaying geometric information in a 3D environment. This paper discusses the geometric basis of the code and its usefulness in the morphological study of the tensegrity vaulted dome for the proposed ephemeral structure. The mathematical code has been shown to significantly facilitate the study of various preliminary configurations of tensegrity vaulted structures.
series	ACADIA
email
last changed	2022/06/07 07:52

_id	acadia04_100
id	acadia04_100
authors	Liapi, Katherine
year	2004
title	A computer Based System for the Design and Fabrication of Tensegrity Structures
source	Fabrication: Examining the Digital Practice of Architecture [Proceedings of the 23rd Annual Conference of the Association for Computer Aided Design in Architecture and the 2004 Conference of the AIA Technology in Architectural Practice Knowledge Community / ISBN 0-9696665-2-7] Cambridge (Ontario) 8-14 November, 2004, 100-109
doi	https://doi.org/10.52842/conf.acadia.2004.100
summary	Tensegrity structures are composed of tension compression components, where the compression components (bars) are discontinuously enclosed within continuous tensile components (cables). From an engineering point of view, a tensegrity structure is characterized by geometric non-linearity and large displacements under loading. Therefore, its prestressed shape and deformation under loading are the result of the combined effect of the geometric parameters that determine the initial configuration of the structure, the level of prestress applied to cables, and the material properties of the component members of the structure. A method for generating the initial geometric configuration of tensegrity structures composed of tensegrity units and a parametric expression of this geometry have already been developed. A novel technology that makes possible the construction of tensegrity structures from the on-site assembly of deployable tensegrity units, which are furnished with a simple mechanism that permits bar-elongation, and, as a result, an increase of the prestress applied to the cables of each unit, is also under development. Also under development is a static analysis method that takes into account the above method for prestressing cables. This paper discusses the features of a system that supports the combined geometric and structural design of tensegrity structures, and integrates a graphical interface to display: a) models of initial geometry, b) geometry of the structure after prestress and loading are applied, and c) magnitude of forces applied to the structure’s component members (bars and cables). The system also provides numerical data to be used in component fabrication, and is therefore expected to become a very valuable tool for the design and construction of tensegrity structures.
series	ACADIA
last changed	2022/06/07 07:59

_id	sigradi2004_078
id	sigradi2004_078
authors	Luisa Rodrigues Félix; Adriane Borda Almeida da Silva; Neusa Mariza Rodrigues Félix
year	2004
title	Entre béziers e nurbs: Ensino de formas livres no contexto arquitetônico [Between Béziers and Nurbs: Teaching Free Forms in an Architectural Context]
source	SIGraDi 2004 - [Proceedings of the 8th Iberoamerican Congress of Digital Graphics] Porte Alegre - Brasil 10-12 november 2004
summary	This work intends to contribute to the use of techniques to represent free forms in didactic activities. It enlarges a previous study using only one technique to represent parametric curves and surfaces. It includes the NURBS technique, without discharging the BEZIER technique used before. Some exercises were structured using both techniques to model a representative example of Architecture: the Ronchamp Chapel . architect Le Corbusier. The tasks were compared to highlight the knowledge elements existing in both activities and its necessity of enlargement to move from one to another. Its is observed that the use of different techniques, as NURBS and Bezier, emphasize the specific characteristics of the geometric entities, establishing the control of parameters for free forms in the context of architectural graphics.
series	SIGRADI
email
last changed	2016/03/10 09:55

_id	ascaad2004_paper15
id	ascaad2004_paper15
authors	Mallasi, Z.
year	2004
title	Identification and Visualisation of Construction Activities’ Workspace Conflicts Utilising 4D CAD/VR Tools
source	eDesign in Architecture: ASCAAD's First International Conference on Computer Aided Architectural Design, 7-9 December 2004, KFUPM, Saudi Arabia
summary	This work addresses the problem arising on all construction sites: the occurrence of workspace interference between construction activities. From a site space planning context, this problem can lead to an inevitable roadblock to the progress of the scheduled construction operations. In real situations, when the spatial congestions occur, they could reduce productivity of workers sharing the same workspace and may cause health and safety hazard issues. The aim of this paper is on presenting a computer-based method and developed tool to assist site managers in the assignment and identification of workspace conflicts. The author focuses on the concept of ‘visualising space competition’ between the construction activities. The concept is based on a unique representation of the dynamic behaviour of activity workspace in 3D space and time. An innovative computer-based tool dubbed PECASO (Patterns Execution and Critical Analysis of Site-space Organisation) has been developed. The emerging technique of 4D (3D + time) visualisation has been chosen to yield an interesting 4D space planning and visualisation tool. A multi-criteria function for measuring the severity of the workspace congestions is designed, embedding the spatial and schedule related criteria. The paper evaluates the PECASO approach in order to minimise the workspace congestions, using a real case study. The paper concludes that the PECASO approach reduces the number of competing workspaces and the conflicting volumes between occupied workspace, which in turn produces better assessment to the execution strategy for a given project schedule. The system proves to be a promising tool for 4D space planning; in that it introduces a new way of communicating the programme of work.
series	ASCAAD
email
last changed	2007/04/08 19:47

_id	2004_292
id	2004_292
authors	Modeen, Thomas
year	2004
title	Using Solid Freeform Fabrication for the Conceptualization and Corporeal Actualization of Architecture
source	Architecture in the Network Society [22nd eCAADe Conference Proceedings / ISBN 0-9541183-2-4] Copenhagen (Denmark) 15-18 September 2004, pp. 292-301
doi	https://doi.org/10.52842/conf.ecaade.2004.292
summary	This paper forms an update to the paper presented ar eCAADe 2003, in Graz. It is a summary of a project which aim is to suggest an alternate methodology for utilizing additive Solid Freeform Fabrication (more commonly known as Rapid Prototyping), for the conceptualization and fabrication of design and architecture. It plans to do so by establishing a methodology that is innate and a direct reflection of the additive SFF production process. The project also aims to address the seemingly divisive discrepancy between the process of digitally conceiving a design and the intrinsically somatic way we perceive it. Whereas the paper in Graz introduced the conceptual foundations and the taxonomy of the project, the aim in this years paper is to present some of the realized designs and discuss, in brief, how what has been learnt could be furthered as the project proceeds. The three designs described in more detail in the paper, all catalyzed by a specific sensory notion, would have been very difficult, if not impossible, to fabricate by any other means than additive Solid Freeform Fabrication.
keywords	Architecture, Design, Solid Freefrom Fabrication, Senses
series	eCAADe
email
last changed	2022/06/07 07:58

_id	2004_318
id	2004_318
authors	Ng, Edward
year	2004
title	Optimise Urban Daylight Design Using Computational Simulations
source	Architecture in the Network Society [22nd eCAADe Conference Proceedings / ISBN 0-9541183-2-4] Copenhagen (Denmark) 15-18 September 2004, pp. 318-324
doi	https://doi.org/10.52842/conf.ecaade.2004.318
summary	Urban design is about providing an infrastructure for its inhabitants. An important consideration of design is to provide natural outdoor conditions that are pleasant and conductive to human activities. A well designed outdoor urban environment will also make the design of individual buildings within it easier. There are many design parameters, for example: Development Density, Plot ratio, Site Coverage, Skyline, Building to Space Ratio, Permeability, Building Shapes and so on. This paper reports a study based on „skylines“ as a design parameter, and how it affects daylight and natural ventilation provisions and performance. Experiments are conducted with physical models in artificial sky, as well as using computational lighting simulations. The study establishes that by varying the skylines of the city, the overall daylight performances could be improved when compared to a city with a uniform skyline - given the same density. The message of the paper is that: through better understanding and design, high density cities could be planned and optimised without losing the development efficacy of the land.
keywords	Daylight; Parametric Study; Urban Design; Density
series	eCAADe
email
last changed	2022/06/07 07:58

_id	acadia04_028
id	acadia04_028
authors	Riese, Martin and Simmons, Marc
year	2004
title	The Glass Office - SCL office and showroom in Brisbane, Australia
source	Fabrication: Examining the Digital Practice of Architecture [Proceedings of the 23rd Annual Conference of the Association for Computer Aided Design in Architecture and the 2004 Conference of the AIA Technology in Architectural Practice Knowledge Community / ISBN 0-9696665-2-7] Cambridge (Ontario) 8-14 November, 2004, 28-33
doi	https://doi.org/10.52842/conf.acadia.2004.028
summary	FRONT is a collaborative of Architects and Engineers based in New York City. Following is a brief description of an example project designed by Front which demonstrates the type of work that the firm is involved in.The project is an office and showroom adjacent to a glass manufacturing plant in Queensland, Australia. The client required a design vocabulary that would optimally demonstrate the production capabilities of the factory. The resultant design features a 70ft x 130ft continuous enclosure composed of overlapping, curved ribs of toughened, laminated glass. All the panels of the building envelope are composed of multiple layers of glass, fabricated in the adjacent factory, directly from digital shop drawings produced using Gehry Technologies’ CATIA/Digital Project.
series	ACADIA
type	normal paper
last changed	2022/06/07 07:56

_id	cf2011_p018
id	cf2011_p018
authors	Sokmenoglu, Ahu; Cagdas Gulen, Sariyildiz Sevil
year	2011
title	A Multi-dimensional Exploration of Urban Attributes by Data Mining
source	Computer Aided Architectural Design Futures 2011 [Proceedings of the 14th International Conference on Computer Aided Architectural Design Futures / ISBN 9782874561429] Liege (Belgium) 4-8 July 2011, pp. 333-350.
summary	The paper which is proposed here will introduce an ongoing research project aiming to research data mining as a methodology of knowledge discovery in urban feature analysis. To address the increasing multi-dimensional and relational complexity of urban environments requires a multidisciplinary approach to urban analysis. This research is an attempt to establish a link between knowledge discovery methodologies and automated urban feature analysis. Therefore, in the scope of this research we apply data mining methodologies for urban analysis. Data mining is defined as to extract important patterns and trends from raw data (Witten and Frank, 2005). When applied to discover relationships between urban attributes, data mining can constitute a methodology for the analysis of multi-dimensional relational complexity of urban environments (Gil, Montenegro, Beirao and Duarte, 2009) The theoretical motivation of the research is derived by the lack of explanatory urban knowledge which is an issue since 1970‚Äôs in the area of urban research. This situation is mostly associated with deductive methods of analysis. The analysis of urban system from the perspective of few interrelated factors, without considering the multi-dimensionality of the system in a deductive fashion was not been explanatory enough. (Jacobs, 1961, Lefebvre, 1970 Harvey, 1973) To address the multi-dimensional and relational complexity of urban environments requires the consideration of diverse spatial, social, economic, cultural, morphological, environmental, political etc. features of urban entities. The main claim is that, in urban analysis, there is a need to advance from traditional one dimensional (Marshall, 2004) description and classification of urban forms (e.g. Land-use maps, Density maps) to the consideration of the simultaneous multi-dimensionality of urban systems. For this purpose, this research proposes a methodology consisting of the application of data mining as a knowledge discovery method into a GIS based conceptual urban database built out of official real data of Beyoglu. Generally, the proposed methodology is a framework for representing and analyzing urban entities represented as objects with properties (attributes). It concerns the formulation of an urban entity‚Äôs database based on both available and non-available (constructed from available data) data, and then data mining of spatial and non-spatial attributes of the urban entities. Location or position is the primary reference basis for the data that is describing urban entities. Urban entities are; building floors, buildings, building blocks, streets, geographically defined districts and neighborhoods etc. Urban attributes are district properties of locations (such as land-use, land value, slope, view and so forth) that change from one location to another. Every basic urban entity is unique in terms of its attributes. All the available qualitative and quantitative attributes that is relavant (in the mind of the analyst) and appropriate for encoding, can be coded inside the computer representation of the basic urban entity. Our methodology is applied by using the real and official, the most complex, complete and up-to-dataset of Beyoglu (a historical neighborhood of Istanbul) that is provided by the Istanbul Metropolitan Municipality (IBB). Basically, in our research, data mining in the context of urban data is introduced as a computer based, data-driven, context-specific approach for supporting analysis of urban systems without relying on any existing theories. Data mining in the context of urban data; ‚Ä¢ Can help in the design process by providing site-specific insight through deeper understanding of urban data. ‚Ä¢ Can produce results that can assist architects and urban planners at design, policy and strategy levels. ‚Ä¢ Can constitute a robust scientific base for rule definition in urban simulation applications such as urban growth prediction systems, land-use simulation models etc. In the paper, firstly we will present the framework of our research with an emphasis on its theoretical background. Afterwards we will introduce our methodology in detail and finally we will present some of important results of data mining analysis processed in Rapid Miner open-source software. Specifically, our research define a general framework for knowledge discovery in urban feature analysis and enable the usage of GIS and data mining as complementary applications in urban feature analysis. Acknowledgments I would like to thank to Nuffic, the Netherlands Organization for International Cooperation in Higher Education, for funding of this research. I would like to thank Ceyhun Burak Akgul for his support in Data Mining and to H. Serdar Kaya for his support in GIS.
keywords	urban feature analysis, data mining, urban database, urban complexity, GIS
series	CAAD Futures
email
last changed	2012/02/11 19:21

_id	ascaad2004_paper4
id	ascaad2004_paper4
authors	Ahmad, Sumbul and Scott C. Chase
year	2004
title	Design Generation of the Central Asian Caravanserai
source	eDesign in Architecture: ASCAAD's First International Conference on Computer Aided Architectural Design, 7-9 December 2004, KFUPM, Saudi Arabia
summary	Challenges for the study of Islamic architecture include its abundance and diversity in expression and its classification based on distinct functional or stylistic types. We address these issues by presenting shape grammars as a methodology for the analysis and design generation of Islamic architecture, with a specific example in the form of a parametric shape grammar for central Asian caravanserais. The grammar is developed by identifying distinct design types. Shape rules are created based on a study of the spatial elements and their organisation in the designs. We illustrate the utility of the grammar by deriving an extant design and as well as, previously unknown designs. We conclude by discussing possible extensions to the current grammar and future work involving the development of a grammar based framework for the comparative analysis of medieval Islamic courtyard buildings.
series	ASCAAD
email
last changed	2007/04/08 19:47

_id	sigradi2004_120
id	sigradi2004_120
authors	Alfonso Corona Martínez; Libertad Vigo; Cristián Buacar; Sebastián Rubbo
year	2004
title	En el taller de proyecto, dónde está la arquitectura? [In the Design Studio, Where is the Architecture? ]
source	SIGraDi 2004 - [Proceedings of the 8th Iberoamerican Congress of Digital Graphics] Porte Alegre - Brasil 10-12 november 2004
summary	This study is placed on the research line of Pedagogical practice and formation of the educator, which theme is related to learning in virtual worlds. The article presents and discusses some aspects of the process of approaching subjects (teachers) to a Virtual World, at a first moment, in a level of exploration, experimentation, interaction as a user, and, at a second moment as a creator, an author of a Virtual World, AWSINOS. The present study takes part of a exploratory/experimental research of qualitative nature that looks for the creation of virtual worlds for the continued qualification online and focuses on the investigation of socio-cognitive behaviors of subjects during their organization as a group and during the activity of building and using these worlds.
keywords	Virtual worlds, learning, continued qualification, avatars
series	SIGRADI
email
last changed	2016/03/10 09:47

For more results click below: