Cumincad : CUMINCAD Papers : Search Results

CumInCAD is a Cumulative Index about publications in Computer Aided Architectural Design
supported by the sibling associations ACADIA, CAADRIA, eCAADe, SIGraDi, ASCAAD and CAAD futures

PDF papers
References

Hits 1 to 20 of 572

Reformat results as: short short into frame detailed detailed into frame

_id	sigradi2004_240
id	sigradi2004_240
authors	Dora Castañé; Arturo F. Montagu
year	2004
title	Mercedes: De lo sustentable al ecoproyecto en poblados con patrimonio histórico [Mercedes: A Sustainable Ecoproject in Towns with Historical Patrimony]
source	SIGraDi 2004 - [Proceedings of the 8th Iberoamerican Congress of Digital Graphics] Porte Alegre - Brasil 10-12 november 2004
summary	This proposal addresses the following topic of a doctoral thesis in progress: The Evolution and Development of Digitized Processes for the Research and Maintenance of Small Town Patrimonies, School and Architecture and Urban Design, University of Buenos Aires, co-directed by architects A. Montagu and R. Gutierrez. The research has been based on the town of Mercedes, Province of Buenos Aires, Argentina, symbols of Buenos Aires.s cultural heritage. At this stage, we are looking for alternative methods to support a project of patrimonial preservation that would help define future landscapes of small towns, and, at the same time, would have minimal or positive environmental impact. This analysis proposes reflexive studies of the paradigms affecting the environment and the feasibility of the project, with the intention of utilizing the concept of .ecoproject.. Therefore, the crucial assistance of specific digital systems, from which evolution is analyzed, supports and enhances the efficiency of the proposed goal. New and broad research opportunities are opening up in this field.
keywords	Patrimony, research, virtual city, preservation
series	SIGRADI
email
last changed	2016/03/10 09:50

_id	sigradi2006_e028c
id	sigradi2006_e028c
authors	Griffith, Kenfield; Sass, Larry and Michaud, Dennis
year	2006
title	A strategy for complex-curved building design:Design structure with Bi-lateral contouring as integrally connected ribs
source	SIGraDi 2006 - [Proceedings of the 10th Iberoamerican Congress of Digital Graphics] Santiago de Chile - Chile 21-23 November 2006, pp. 465-469
summary	Shapes in designs created by architects such as Gehry Partners (Shelden, 2002), Foster and Partners, and Kohn Peterson and Fox rely on computational processes for rationalizing complex geometry for building construction. Rationalization is the reduction of a complete geometric shape into discrete components. Unfortunately, for many architects the rationalization is limited reducing solid models to surfaces or data on spread sheets for contractors to follow. Rationalized models produced by the firms listed above do not offer strategies for construction or digital fabrication. For the physical production of CAD description an alternative to the rationalized description is needed. This paper examines the coupling of digital rationalization and digital fabrication with physical mockups (Rich, 1989). Our aim is to explore complex relationships found in early and mid stage design phases when digital fabrication is used to produce design outcomes. Results of our investigation will aid architects and engineers in addressing the complications found in the translation of design models embedded with precision to constructible geometries. We present an algorithmically based approach to design rationalization that supports physical production as well as surface production of desktop models. Our approach is an alternative to conventional rapid prototyping that builds objects by assembly of laterally sliced contours from a solid model. We explored an improved product description for rapid manufacture as bilateral contouring for structure and panelling for strength (Kolarevic, 2003). Infrastructure typically found within aerospace, automotive, and shipbuilding industries, bilateral contouring is an organized matrix of horizontal and vertical interlocking ribs evenly distributed along a surface. These structures are monocoque and semi-monocoque assemblies composed of structural ribs and skinning attached by rivets and adhesives. Alternative, bi-lateral contouring discussed is an interlocking matrix of plywood strips having integral joinery for assembly. Unlike traditional methods of building representations through malleable materials for creating tangible objects (Friedman, 2002), this approach constructs with the implication for building life-size solutions. Three algorithms are presented as examples of rationalized design production with physical results. The first algorithm [Figure 1] deconstructs an initial 2D curved form into ribbed slices to be assembled through integral connections constructed as part of the rib solution. The second algorithm [Figure 2] deconstructs curved forms of greater complexity. The algorithm walks along the surface extracting surface information along horizontal and vertical axes saving surface information resulting in a ribbed structure of slight double curvature. The final algorithm [Figure 3] is expressed as plug-in software for Rhino that deconstructs a design to components for assembly as rib structures. The plug-in also translates geometries to a flatten position for 2D fabrication. The software demonstrates the full scope of the research exploration. Studies published by Dodgson argued that innovation technology (IvT) (Dodgson, Gann, Salter, 2004) helped in solving projects like the Guggenheim in Bilbao, the leaning Tower of Pisa in Italy, and the Millennium Bridge in London. Similarly, the method discussed in this paper will aid in solving physical production problems with complex building forms. References Bentley, P.J. (Ed.). Evolutionary Design by Computers. Morgan Kaufman Publishers Inc. San Francisco, CA, 1-73 Celani, G, (2004) “From simple to complex: using AutoCAD to build generative design systems” in: L. Caldas and J. Duarte (org.) Implementations issues in generative design systems. First Intl. Conference on Design Computing and Cognition, July 2004 Dodgson M, Gann D.M., Salter A, (2004), “Impact of Innovation Technology on Engineering Problem Solving: Lessons from High Profile Public Projects,” Industrial Dynamics, Innovation and Development, 2004 Dristas, (2004) “Design Operators.” Thesis. Massachusetts Institute of Technology, Cambridge, MA, 2004 Friedman, M, (2002), Gehry Talks: Architecture + Practice, Universe Publishing, New York, NY, 2002 Kolarevic, B, (2003), Architecture in the Digital Age: Design and Manufacturing, Spon Press, London, UK, 2003 Opas J, Bochnick H, Tuomi J, (1994), “Manufacturability Analysis as a Part of CAD/CAM Integration”, Intelligent Systems in Design and Manufacturing, 261-292 Rudolph S, Alber R, (2002), “An Evolutionary Approach to the Inverse Problem in Rule-Based Design Representations”, Artificial Intelligence in Design ’02, 329-350 Rich M, (1989), Digital Mockup, American Institute of Aeronautics and Astronautics, Reston, VA, 1989 Schön, D., The Reflective Practitioner: How Professional Think in Action. Basic Books. 1983 Shelden, D, (2003), “Digital Surface Representation and the Constructability of Gehry’s Architecture.” Diss. Massachusetts Institute of Technology, Cambridge, MA, 2003 Smithers T, Conkie A, Doheny J, Logan B, Millington K, (1989), “Design as Intelligent Behaviour: An AI in Design Thesis Programme”, Artificial Intelligence in Design, 293-334 Smithers T, (2002), “Synthesis in Designing”, Artificial Intelligence in Design ’02, 3-24 Stiny, G, (1977), “Ice-ray: a note on the generation of Chinese lattice designs” Environmental and Planning B, volume 4, pp. 89-98
keywords	Digital fabrication; bilateral contouring; integral connection; complex-curve
series	SIGRADI
email
last changed	2016/03/10 09:52

_id	2004_248
id	2004_248
authors	Chang, Teng-Wen and Woodbury, Robert F.
year	2004
title	GEOMETRY IN HIGHLY STRUCTURED DESIGN SPACES
doi	https://doi.org/10.52842/conf.ecaade.2004.248
source	Architecture in the Network Society [22nd eCAADe Conference Proceedings / ISBN 0-9541183-2-4] Copenhagen (Denmark) 15-18 September 2004, pp. 248-254
summary	The Australian branch of the SEED project created a new formalism for design spaces in which the fundamental structuring operator is information specificity, formally characterised as subsumption. Here design space navigation is composed as combinations of the primitive operators of resolution, unification, anti-unification, search, query and hysterical undo. The structures needed to support such a view are highly constrained in a mathematical sense and it is in these constraints that the problems for representation of geometry arise. The research challenge is to add the formal design space exploration constraints into an existing geometric representation scheme or alternatively to discover a new scheme in which the constraints are realized. Based on Typed Feature Structures (TFS), Geometric Typed Feature Structures (GTFS) are a representation scheme and method for performing the basic design space exploration operations on geometric objects. The crucial insight behind extending TFS to geometry is to discover useful algebraic structures of geometric objects affording the mathematics required of TFS. In this paper we describe Geometric Typed Feature Structures through one example of form: IOPSet. Our method of exposition is both mathematical and graphical: for each structure we will demonstrate both how it meets the necessary formal conditions as well as the sorts of form-sculpting operations it enables. An architectural example: insulated enclosure is used as a demonstration of subsumption operations over IOPSet. One alternative description of insulated enclosure using GTFS is also shown in the paper.
keywords	Geometric Typed Feature Structures, SEED, Design Space Explorer, Geometric Design Information
series	eCAADe
type	normal paper
email
last changed	2022/06/07 07:56

_id	2004_050
id	2004_050
authors	Chiu, Mao-Lin
year	2004
title	Curious Agents in Virtual Exhibitive Environments Simulative Human-Computer Interaction
doi	https://doi.org/10.52842/conf.ecaade.2004.050
source	Architecture in the Network Society [22nd eCAADe Conference Proceedings / ISBN 0-9541183-2-4] Copenhagen (Denmark) 15-18 September 2004, pp. 50-57
summary	The creation of virtual environments is becoming the alternative for spatial design, while what can be expanded from the real environment is often questioned. This paper proposes the agent interface based on curiosity to create human computer interaction in virtual exhibitive environments. From a social and behavioral point of view, this research explores the use of places as metaphors and simulative human-computer interactions in virtual environments by reactive agents and proactive curious agents based on situation detection. The process is demonstrated by a museum exhibition project. Both the physical and the virtual environment are built, and studied the human behaviors and experiences from their presence at both environments. Agent interfaces are adopted in the virtual environment to enhance people-to-people and people-to-place interactions. The development process, the observation, the interface agent, and discussion based on the findings are presented.
keywords	Virtual Environment; Digital Design; Agent; Curiosity; Interfaces
series	eCAADe
email
last changed	2022/06/07 07:56

_id	sigradi2004_129
id	sigradi2004_129
authors	Clarissa Ribeiro; Anja Pratschke; Azael Camargo
year	2004
title	[on]_ambiente para uma comunidade virtual ["[on]_ambiente" for a Virtual Community]
source	SIGraDi 2004 - [Proceedings of the 8th Iberoamerican Congress of Digital Graphics] Porte Alegre - Brasil 10-12 november 2004
summary	Inside of a public politics project . Comunidades Online . that considers the construction of a virtual community as intervention in a concrete community, the article considers some initial parameters capable to guide the design of a virtual environment of dialogue and interaction for this on-line community. The objective of this article is to trace the main lines that will direct the design process this environment in a boarding with approaches to the architecture, placing on questions to the space where this dialogue happens. The work develops from the discussions circa the concept of community; of interfaces examples that illustrate different ways to give quality support to the dialogue between users, and one more consistent representation of .I., as well as expression of the identity in the virtual environment; and of an alternative presentation for technological basement, the semantic web.
keywords	Community; virtual communities; semantic web; virtual environment design
series	SIGRADI
email
last changed	2016/03/10 09:49

_id	2004_286
id	2004_286
authors	Datta, Sambit
year	2004
title	A Representational Construct for Sharing Knowledge in Design Exploration
doi	https://doi.org/10.52842/conf.ecaade.2004.286
source	Architecture in the Network Society [22nd eCAADe Conference Proceedings / ISBN 0-9541183-2-4] Copenhagen (Denmark) 15-18 September 2004, pp. 286-291
summary	Exploration with formal design systems comprise iterative processes for specifying problems, finding plausible and alternative solutions, judging the validity of solutions relative to problems and reformulating problems and solutions. These processes are knowledge intensive, collaborative and multidisciplinary in nature. Recent research efforts propose representational frameworks that allow for modeling of knowledge capture, knowledge sharing and knowledge reuse during designing. However, design remains a human enterprise: to be scalable and usable in design practice, formal symbolic representations need to be embedded within a broader framework of agent (human and computational) interaction. This paper argues that, for sharing and reusing knowledge between agents in design exploration, it is necessary to build an intermediary representational structure that bridges specialist interactions with exploration knowledge (the domain) and the symbol structures that represent them (the symbol substrate). The paper identifies the requirements of such an intermediary representation for the sharing of knowledge between design agents. These requirements are addressed through the development of a shared interaction construct, the feature node.
keywords	Exploration, Design Knowledge, Interaction Model, Mixed-Initiative
series	eCAADe
last changed	2022/06/07 07:55

_id	sigradi2004_404
id	sigradi2004_404
authors	Eduardo Lyon
year	2004
title	Artificial intelligence and emergence in architecture: A multi-agent based model for design processes
source	SIGraDi 2004 - [Proceedings of the 8th Iberoamerican Congress of Digital Graphics] Porte Alegre - Brasil 10-12 november 2004
summary	The purpose of this paper is to provide an alternative approach to traditional design process formulation and elaboration. In contrast to traditional models of design process fundamentally defined by the abstract manipulation of objects, this study recognizes that the resources available for rethinking architecture are to be found in a reformulation of its theory and practice. This reformulation should be based on non-linear design processes in which dynamic emergence and invention take the place of a linear design process fixed on a particular object evolution. Design is possible to be defined in two different and commonly confused ways; one as the process of designing or design activity and the second as the product of designing. In this study, we are concerned with design as a process to emphasize the misconceptions, derived from studying design products solely. Therefore, we propose a change from a design knowledge based on objects to a one focused on design as a network of processes.
series	SIGRADI
email
last changed	2016/03/10 09:51

_id	2004_396
id	2004_396
authors	Fischer, Thomas
year	2004
title	Microcontroller - Enhanced Physical Models for Architectural and Product Design
doi	https://doi.org/10.52842/conf.ecaade.2004.396
source	Architecture in the Network Society [22nd eCAADe Conference Proceedings / ISBN 0-9541183-2-4] Copenhagen (Denmark) 15-18 September 2004, pp. 396-403
summary	Electronic sensors, controllers, displays and actuators can significantly enhance the value of physical models as processes of use, interaction and transformation take center stage in various fields of design. These technologies allow the development of novel computer interfaces for new kinds of interaction with virtual models, and in the future they will allow new types of active building components and materials for automated construction and dynamic runtime adaptations of inhabitable environments. However, embedding programmed logic into physical objects seems to confront designers and model makers with a steep learning curve outside the domains of their traditional expertise. The variety of alternative technologies and development tools in this area has a particularly disorienting effect on novices. Some early experiences however suggest that mastery of this learning curve is easily within reach, given some basic introduction, guidance and support. It is the purpose of this paper to provide designers with a starting point for explorations into this area, to give orientation and to demonstrate some possible development approaches and results.
keywords	Interaction, Process, High-Fidelity Models, Microcontrollers, Electronics
series	eCAADe
last changed	2022/06/07 07:51

_id	2004_269
id	2004_269
authors	Gowans, Scott and Wright, Richard M.
year	2004
title	Developing Architectonic Language Through Digital Observation
doi	https://doi.org/10.52842/conf.ecaade.2004.269
source	Architecture in the Network Society [22nd eCAADe Conference Proceedings / ISBN 0-9541183-2-4] Copenhagen (Denmark) 15-18 September 2004, pp. 269-277
summary	The question for architects is always how to begin. This proposal attempts to illustrate a design methodology that is characterised by its attention to non-traditional generators. The focus of the paper is the definition of an innovative design process characterised by the production of an architectonic language through the observation of the ephemeral and the transitory (the quanta of place), and which pays cognisance to the realization of a three-dimensional narrative, placing value upon the products of investigation as well as the resultant design. As the title suggests the process outlined concerns itself with the examination of the ephemeral, the transitory and the unobserved. The overriding concern is with the recording of fragments of a chosen environment (site) and, the collation and depiction of these findings in an alternative three-dimensional environment (virtual space). This process is only made possible by the advent of computer applications capable of generating the complexity of three-dimensional environments needed to explore the plethora of forms generated by the initial recordings. This process is concerned with the nascence of architectural expression and the formalising of architectural propositions composed from an individual’s interpretation of the ‘space between’, the obvious and the immaterial, and the phenomena that exist there. The generators are the things beyond immediate perception. They are the quanta of place. It is this process of capturing fixed moments in time and space and, translating imperceptible nanomoments and nanoevents, that allows for the development of exploratory diagrams constructed over a backdrop of credible analysis. These make apparent the infinite possibilities for further transition whilst illustrating the conceptual lineage that links each instance to its antecedents. The resultant physical forms embody the essence of something transformed. They possess cultural and emotional syntax. They become mementos in the landscape.
series	eCAADe
last changed	2022/06/07 07:51

_id	acadia04_270
id	acadia04_270
authors	Iwamoto, Lisa
year	2004
title	Embodied Fabrication: Computer Aided Spacemaking
doi	https://doi.org/10.52842/conf.acadia.2004.270
source	Fabrication: Examining the Digital Practice of Architecture [Proceedings of the 23rd Annual Conference of the Association for Computer Aided Design in Architecture and the 2004 Conference of the AIA Technology in Architectural Practice Knowledge Community / ISBN 0-9696665-2-7] Cambridge (Ontario) 8-14 November, 2004, 270-281
summary	This paper discusses work from two digital fabrication seminars taught at the University of California Berkeley: Fabricating Space and Thick Skinned. The full-scale installations explore relationships among the body, digital design, and making. They combine investigations of perceptual and spatial effects with digital modeling processes and full-scale CNC fabrication, focusing in particular on how new media practices forge alternative methods of representing and constructing corporeal and sensorial experience.
keywords	CAD/CAM, body, perception
series	ACADIA
email
last changed	2022/06/07 07:50

_id	acadia03_040
id	acadia03_040
authors	Katherine A. Liapi, Katherine A. and Kim, Jinman
year	2003
title	A Parametric Approach to the Design of a Tensegrity Vaulted Dome for an Ephemeral Structure for the 2004 Olympics
doi	https://doi.org/10.52842/conf.acadia.2003.301
source	Connecting >> Crossroads of Digital Discourse [Proceedings of the 2003 Annual Conference of the Association for Computer Aided Design In Architecture / ISBN 1-880250-12-8] Indianapolis (Indiana) 24-27 October 2003, pp. 301-309
summary	Tensegrity, defined as “tensional integrity,” is central to the design of a semi-open exhibition space that was submitted as an entry to the international competition for the design of “Ephemeral Structures for the City of Athens,” in the context of the 2004 Olympic Games. The main feature of the proposed exhibition space is a vaulted dome composed of interconnected detachable and deployable tensegrity units. The most challenging aspect in the design of the tensegrity vault was the generation of alternative spatial configurations for form exploration and study. For this purpose a mathematical code has been developed that links all the parameters that affect the design of tensegrity vaults. The code also allows for the parametric graphical generation of the vault by displaying geometric information in a 3D environment. This paper discusses the geometric basis of the code and its usefulness in the morphological study of the tensegrity vaulted dome for the proposed ephemeral structure. The mathematical code has been shown to significantly facilitate the study of various preliminary configurations of tensegrity vaulted structures.
series	ACADIA
email
last changed	2022/06/07 07:52

_id	ddss2004_ra-129
id	ddss2004_ra-129
authors	Ma, L., Th. Arentze, A. Borgers, and H. Timmermans
year	2004
title	Using Bayesian Decision Networks for Knowledge Representation under Conditions of Uncertainty in Multi-Agent Land Use Simulation Models
source	Van Leeuwen, J.P. and H.J.P. Timmermans (eds.) Recent Advances in Design & Decision Support Systems in Architecture and Urban Planning, Dordrecht: Kluwer Academic Publishers, ISBN 1-4020-24088, p. 129-144
summary	Land suitability analysis typically involves the assessment of the suitability of land units without knowing the future spatial distribution of land use. Traditional planning techniques have used “algebraic equations” to express land suitability as a weighted function of suitability scores across multiple criteria. However, the existing multi-criteria evaluation methods do not systematically account for uncertainty about the land use in adjacent and other cells. This paper proposes an alternative approach to land suitability analysis that does address the problem of uncertainty. In particular, Bayesian decision networks are suggested as a means of knowledge representation for agents in a multi-agent land use simulation system. Bayesian decision networks model the uncertainty in terms of probabilities specified in the network representing the expertise of specialists with respect to specific land uses. This paper discusses the approach and illustrates its use in the context of a retail agent.
keywords	Land Suitability Analysis, Multi-Agents, Knowledge Representation, Bayesian Decision Networks
series	DDSS
last changed	2004/07/03 22:13

_id	201caadria2004
id	201caadria2004
authors	Marc Aurel Schnabel, Steve K S Kuan and Weidong Li
year	2004
title	3D Transformations - 3D Scanning, Digital Modelling, Rapid Prototyping and Physical Depiction
doi	https://doi.org/10.52842/conf.caadria.2004.227
source	CAADRIA 2004 [Proceedings of the 9th International Conference on Computer Aided Architectural Design Research in Asia / ISBN 89-7141-648-3] Seoul Korea 28-30 April 2004, pp. 227-238
summary	We investigate the creation and reinterpretation of an architectural design process using a variety of digital and physical media. We study how tools for design influence perception, comprehension and creation of spatial volumes within both Virtual Environments (VE) and physical realms. We explain how designers translate spatial volumes and communicate architectural design ideas by using VE and conventional models. In a series of reinterpretation of architectural meanings we examine the translation of threedimensional design from virtual to tangible depictions and vice versa. We conduct a design-studio in order to explore issues of quality, understanding, communication and building of architectural compositions. VE can be an environment for design distinguishable and facilitating reality. We test this statement by interchanging both realms to that extent that the boundaries of each one are nearly dismantled. Virtuality and reality are both used in alternative formand design-finding exercises in order to gain an overall conclusive design.
series	CAADRIA
email
last changed	2022/06/07 07:59

_id	3ade
id	3ade
authors	Martens, B. and Jabi, W. (Eds.)
year	2004
title	SPECIAL ISSUE ON „DIGITAL MEDIA LIBRARIES“
source	ITcon Vol. 9 (2004), pp. 97-174
summary	There are numerous commercial digital asset management systems, but most of them are relatively expensive and meant for in-house management. In the meanwhile alternative solutions have been developed for searchable interactive repositories of media for professional use, education and research. Web-based digital libraries and indexes of literature have been available on the internet for a few years now. In many cases a focus on specified areas is given and published information is disseminated in this way. However, researchers, educators and practitioners in architecture and civil engineering also depend on various sources of information that are stored and delivered in a multitude of media formats. Some of that information is case-based and built incrementally from previous experiences.
type	normal paper
email
more	http://www.itcon.org/cgi-bin/papers/Show?2004_6
last changed	2004/08/17 07:46

_id	eaea2003_19-martens
id	eaea2003_19-martens
authors	Martens, B. and Tschuppik, W.-M.
year	2004
title	Displaying Spatially Complex Constellations. An Endoscopic Exploration Implementing the CUBIC-VR Technique
source	Spatial Simulation and Evaluation - New Tools in Architectural and Urban Design [Proceedings of the 6th European Architectural Endoscopy Association Conference / ISBN 80-227-2088-7], pp. 101-107
summary	This paper presents a research project on approaching the possibilities of an “alternative” utilization of the Cubic-VR technique as a form of digital endoscopy. Exemplified by a meaningful exploration of the Viennese American Bar (Architect Adolf Loos) the potential for conveying spatial complex constellations is illustrated.
series	EAEA
email
more	http://info.tuwien.ac.at/eaea
last changed	2005/09/09 10:43

_id	518caadria2004
id	518caadria2004
authors	Mary Lou Maher and Mijeong Kim
year	2004
title	Supporting Design Using Self-Organizing Design Knowledge
doi	https://doi.org/10.52842/conf.caadria.2004.957
source	CAADRIA 2004 [Proceedings of the 9th International Conference on Computer Aided Architectural Design Research in Asia / ISBN 89-7141-648-3] Seoul Korea 28-30 April 2004, pp. 957-968
summary	This paper presents the potential of swarm intelligence models as an alternative to cognitive models in the representation of design knowledge to develop a model of a self-organizing design environment. The presented framework for design knowledge provides the basis for an incremental development of swarm intelligence models for responding to design changes.
series	CAADRIA
email
last changed	2022/06/07 07:59

_id	eaea2003_12-matalasov
id	eaea2003_12-matalasov
authors	Matalasov, M. and Matalasov, E.
year	2004
title	Our Views on Actual Researches of 3D-modelling in Architecture
source	Spatial Simulation and Evaluation - New Tools in Architectural and Urban Design [Proceedings of the 6th European Architectural Endoscopy Association Conference / ISBN 80-227-2088-7], pp. 48-58
summary	This contribution is devoted to the brief description of the basic directions and tendencies of researches of the laboratory of video systems MARCHI. In connection with development of hardware-software computer means and their practically absolute, not alternative application in the practice of architectural designing, nowadays (not always is proved) the sphere of application of the former traditional methods of physical modeling and their connection to the endoscopic methods has been narrowed. We consider some new probable directions of development of scientific and educational work within the framework of activity of our laboratory, allowing a more balanced approach to these problems. As we have discussed, our theoretical researches and practical works must reassume an existing non-standard and controversial situation in Russia, such as established substantial intellectual potentials in scientific- and methodological researches within study processes. In addition to that, what we can use are affordable and limited physical and financial recourses and capability for technical development of works for modeling perception in designing architectural and town planning space. These initiated searches in the field of non-standard thinking, derive from our contacts with EAEA colleagues. Below we will try briefly to explain our basic principles of work development. (To be clear, some time we dismiss references and notes into exact reports from our conferences supposing that interested colleagues may get further and detailed information from already published past events).
series	EAEA
more	http://info.tuwien.ac.at/eaea
last changed	2005/09/09 10:43

_id	caadria2020_363
id	caadria2020_363
authors	Pal, Abhipsa, Chan, Wi Leen, Tan, Ying Yi, Chia, Pei Zhi and Tracy, Kenneth Joseph
year	2020
title	Knit Concrete Formwork
doi	https://doi.org/10.52842/conf.caadria.2020.1.213
source	D. Holzer, W. Nakapan, A. Globa, I. Koh (eds.), RE: Anthropocene, Design in the Age of Humans - Proceedings of the 25th CAADRIA Conference - Volume 1, Chulalongkorn University, Bangkok, Thailand, 5-6 August 2020, pp. 213-222
summary	The manufacture of concrete funicular shells often relies on traditional formwork construction techniques to provide a sculptured cavity for the fluid material to occupy (Bechthold, 2004). While this enables a predictable geometric outcome, the extensive use of timber and/or steel to construct these formworks account for up to 60% of the total production cost of concrete and are discarded after the casting is complete (Lloret et al. 2014). Thus, we propose an alternative method to create prefabricated modular systems out of concrete casted in customised tubular knitted membranes. These perform as a network of struts that can be affixed onto 3D printed nodes of a singular design. Altogether, these components serve as a kit-of-parts that can be transported to site and assembled together to create shell geometries.
keywords	Knitted Textile; Fabric Formwork; Concrete Casting
series	CAADRIA
email
last changed	2022/06/07 08:00

_id	sigradi2004_387
id	sigradi2004_387
authors	Patricia Laura Muñoz
year	2004
title	El sentido de los recursos didácticos digitales [The Meaning of Digital Didactic Resources]
source	SIGraDi 2004 - [Proceedings of the 8th Iberoamerican Congress of Digital Graphics] Porte Alegre - Brasil 10-12 november 2004
summary	The purpose of this work was to delineate the sense of using instructional applications with digital media, not to replace but to support the activities of the courses of morphology for Industrial Design. On this occasion we concentrated only on explanatory material. We found out that there are two main features that justify the application of these new media. They are constituent aspects of them: density and flexibility. Density is obtained through the multiple representations that digital media enable. Flexibility allows us to bring these representations together in alternative narrations, according to the different requirements of our teaching activities. An educational application, in order to be educational, should be dynamic and changing, defying the idea of an optimized and unique way of reaching comprehension. So, an intentional use of digital media becomes a powerful and accessible tool to make this happen.
keywords	Flexibility, Morphology, Hybridity
series	SIGRADI
email
last changed	2016/03/10 09:57

_id	ddss2004_d-95
id	ddss2004_d-95
authors	Saarloos, D., Th. Arentze, A. Borgers, and H. Timmermans
year	2004
title	Multi-Agents Generating Alternative Plans in Local Land-Use Planning
source	Van Leeuwen, J.P. and H.J.P. Timmermans (eds.) Developments in Design & Decision Support Systems in Architecture and Urban Planning, Eindhoven: Eindhoven University of Technology, ISBN 90-6814-155-4, p. 95-110
summary	This paper addresses the MASQUE multi-agent framework for generating alternative plans in local land-use planning, In this framework agents represent land-use experts and initiate the development of plan proposals and request each other to express their claims in order to incrementally draw up these proposals. Presented is a probabilistic approach to the implementation of those agents to enable them to make decisions under uncertainty. It is described what personal and collective beliefs they construct and use in order to strategically choose their actions. Negotiation takes place between the initiating agent and the others in order to reach agreement on the incorporation of the claims. The negotiation is organized as an iterative process in which both parties consider conciliatory adjustments of their strategies, and thus their decisions, in order to try to find mutually accepted solutions.
keywords	Multi-Agents, Local Land-Use Planning, Alternative Plan Generation, Reasoning, and Interaction
series	DDSS
last changed	2004/07/03 22:13

For more results click below: