Cumincad : CUMINCAD Papers : Search Results

CumInCAD is a Cumulative Index about publications in Computer Aided Architectural Design
supported by the sibling associations ACADIA, CAADRIA, eCAADe, SIGraDi, ASCAAD and CAAD futures

PDF papers
References

Hits 1 to 20 of 572

Reformat results as: short short into frame detailed detailed into frame

_id	acadia16_140
id	acadia16_140
authors	Nejur, Andrei; Steinfeld, Kyle
year	2016
title	Ivy: Bringing a Weighted-Mesh Representations to Bear on Generative Architectural Design Applications
doi	https://doi.org/10.52842/conf.acadia.2016.140
source	ACADIA // 2016: POSTHUMAN FRONTIERS: Data, Designers, and Cognitive Machines [Proceedings of the 36th Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) ISBN 978-0-692-77095-5] Ann Arbor 27-29 October, 2016, pp. 140-151
summary	Mesh segmentation has become an important and well-researched topic in computational geometry in recent years (Agathos et al. 2008). As a result, a number of new approaches have been developed that have led to innovations in a diverse set of problems in computer graphics (CG) (Sharmir 2008). Specifically, a range of effective methods for the division of a mesh have recently been proposed, including by K-means (Shlafman et al. 2002), graph cuts (Golovinskiy and Funkhouser 2008; Katz and Tal 2003), hierarchical clustering (Garland et al. 2001; Gelfand and Guibas 2004; Golovinskiy and Funkhouser 2008), primitive fitting (Athene et al. 2004), random walks (Lai et al.), core extraction (Katz et al.) tubular multi-scale analysis (Mortara et al. 2004), spectral clustering (Liu and Zhang 2004), and critical point analysis (Lin et al. 20070, all of which depend upon a weighted graph representation, typically the dual of a given mesh (Sharmir 2008). While these approaches have been proven effective within the narrowly defined domains of application for which they have been developed (Chen 2009), they have not been brought to bear on wider classes of problems in fields outside of CG, specifically on problems relevant to generative architectural design. Given the widespread use of meshes and the utility of segmentation in GAD, by surveying the relevant and recently matured approaches to mesh segmentation in CG that share a common representation of the mesh dual, this paper identifies and takes steps to address a heretofore unrealized transfer of technology that would resolve a missed opportunity for both subject areas. Meshes are often employed by architectural designers for purposes that are distinct from and present a unique set of requirements in relation to similar applications that have enjoyed more focused study in computer science. This paper presents a survey of similar applications, including thin-sheet fabrication (Mitani and Suzuki 2004), rendering optimization (Garland et al. 2001), 3D mesh compression (Taubin et al. 1998), morphin (Shapira et al. 2008) and mesh simplification (Kalvin and Taylor 1996), and distinguish the requirements of these applications from those presented by GAD, including non-refinement in advance of the constraining of mesh geometry to planar-quad faces, and the ability to address a diversity of mesh features that may or may not be preserved. Following this survey of existing approaches and unmet needs, the authors assert that if a generalized framework for working with graph representations of meshes is developed, allowing for the interactive adjustment of edge weights, then the recent developments in mesh segmentation may be better brought to bear on GAD problems. This paper presents work toward the development of just such a framework, implemented as a plug-in for the visual programming environment Grasshopper.
keywords	tool-building, design simulation, fabrication, computation, megalith
series	ACADIA
type	paper
email
last changed	2022/06/07 07:58

_id	ascaad2004_paper4
id	ascaad2004_paper4
authors	Ahmad, Sumbul and Scott C. Chase
year	2004
title	Design Generation of the Central Asian Caravanserai
source	eDesign in Architecture: ASCAAD's First International Conference on Computer Aided Architectural Design, 7-9 December 2004, KFUPM, Saudi Arabia
summary	Challenges for the study of Islamic architecture include its abundance and diversity in expression and its classification based on distinct functional or stylistic types. We address these issues by presenting shape grammars as a methodology for the analysis and design generation of Islamic architecture, with a specific example in the form of a parametric shape grammar for central Asian caravanserais. The grammar is developed by identifying distinct design types. Shape rules are created based on a study of the spatial elements and their organisation in the designs. We illustrate the utility of the grammar by deriving an extant design and as well as, previously unknown designs. We conclude by discussing possible extensions to the current grammar and future work involving the development of a grammar based framework for the comparative analysis of medieval Islamic courtyard buildings.
series	ASCAAD
email
last changed	2007/04/08 19:47

_id	2004_489
id	2004_489
authors	Bille, Pia
year	2004
title	CityScape - Analysing Modern Urbanism
doi	https://doi.org/10.52842/conf.ecaade.2004.489
source	Architecture in the Network Society [22nd eCAADe Conference Proceedings / ISBN 0-9541183-2-4] Copenhagen (Denmark) 15-18 September 2004, pp. 489-494
summary	Understanding scale is a major concern and a condition of working in the field of architecture and urban design. The project described in this case origins from Blauwe Koffer, a method developed in the 80’s by the Dutch architects Dolf Dobbelaar and Paul de Vroom. The method is devoted to analysis of form and function of important architectural and urban design projects in the last century and is a flexible model for searching architectural solutions at an early stage of a project. In the paper I will describe how a group of faculty transformed the Blauwe Koffer into a digital method serving as an introduction to urban design in the second year curriculum. The project introduced topics of modern urbanism defined as cityscapes. Through a series of mapping analysis the students studied variations of scale, extension, volume, density, borders, overlaps, bricollage, diversity etc. The students were required to do analysis in the form of a matrix of 6 x 7 cells. Categories in the analysis were three scales of figure / ground studies, bricollage and studies of the urban raster. DataTown was a particular category inspired by MVRDV. The project data derived from digital maps, and project presentations in books and magazines. At second year the students are assigned to do digital projects as a part of the curriculum and the students are required to have their own computer. The project was the first digital assignment in studio and previous computer courses and skills were limited to a one-week course in desktop publishing. The CityScape project was a successful experience in integrating computation in studio, in group work and in analysis of modern urbanism. The paper will show some of the projects and discuss the assignment as a part of the implementation of an IT-strategy.
keywords	CAAD-Curriculum; Urban Morphology; Mapping; Education and Practise
series	eCAADe
email
last changed	2022/06/07 07:54

_id	2004_366
id	2004_366
authors	García Alvarado, Rodrigo and Monedero Isorna, Javier
year	2004
title	The Fragmented Eye - Cinematographic Techniques for Architectural Animations
doi	https://doi.org/10.52842/conf.ecaade.2004.366
source	Architecture in the Network Society [22nd eCAADe Conference Proceedings / ISBN 0-9541183-2-4] Copenhagen (Denmark) 15-18 September 2004, pp. 366-373
summary	In order to contribute to the elaboration of more expressive architectural animations, some famous films, documentaries of buildings and award-winning animations were analyzed. This was carried out examining the cinematographic techniques used at three levels of filming language; image setting, shot movements and montage, according to concepts described in theoretical texts. The analysis revealed an extensive use of techniques, in particular in movies, that give graphic diversity and perceptual stability. Based on that, it proposes some ideas for the planning of an architectural animation and a computer implementation of some filmic concepts, in particular related to movements of the point-of-view. This study suggest a fragmented view of building designs, to get an appealing moving presentation, with visual interest and continuity, as such should be also in architecture.
keywords	Animation, Film, Image, Movement, Montage
series	eCAADe
last changed	2022/06/07 07:50

_id	acadia04_076
id	acadia04_076
authors	Hanna, Sean
year	2004
title	Modularity and Flexibility at the Small Scale: Evolving Continuous Material Variation with Stereolithography
doi	https://doi.org/10.52842/conf.acadia.2004.076
source	Fabrication: Examining the Digital Practice of Architecture [Proceedings of the 23rd Annual Conference of the Association for Computer Aided Design in Architecture and the 2004 Conference of the AIA Technology in Architectural Practice Knowledge Community / ISBN 0-9696665-2-7] Cambridge (Ontario) 8-14 November, 2004, 76-87
summary	In this paper, we introduce a technique by which the internal material properties of an object can be optimised at a microstructural level (5x10-5m) to counteract the forces that are applied to it. These can then be fabricated using the rapid prototyping method of stereolithography. The proposed technique is analogous to principles of mass customization and takes advantage of a flexible module to create complex structures in a manner that is computationally efficient and effective. The process is two-staged, in which a genetic algorithm evolves the topology of the microstructure and a second algorithm incorporating Finite Element Analysis then optimises the geometry. The examples shown are designed specifically for the fabrication technique, but the method and general principles are applicable to structural problems at any scale.
keywords	genetic algorithm, rapid prototyping, stereolithography, materials
series	ACADIA
email
last changed	2022/06/07 07:50

_id	315caadria2004
id	315caadria2004
authors	Kuo-Chung Wen, Wei-Lung Chen
year	2004
title	Application of Genetic Algorithms to Establish Flooding Evacuation Path Model in Metropolitan Area
doi	https://doi.org/10.52842/conf.caadria.2004.557
source	CAADRIA 2004 [Proceedings of the 9th International Conference on Computer Aided Architectural Design Research in Asia / ISBN 89-7141-648-3] Seoul Korea 28-30 April 2004, pp. 557-570
summary	This research has shown the difficulties associated with the GIS and the flooding evacuation path search through the huge searching space generated during the network analysis process. This research also presents an approach to these problems by utilizing a search process whose concept is derived from natural genetics. Genetic algorithms (GAs) have been introduced in the optimization problem solving area by Holland (1975) and Goldberg (1989) and have shown their usefulness through numerous applications. We apply GA and GIS to choice flooding evacuation path in metropolitan area in this study. We take the region of Shiji city in Taiwan for case. That could be divided into four parts. First, is to set the population of GA operation. Second, is to choose crossover and mutation. Third, is to calculate the fitness function of each generation and to select the better gene arrangement. Fourth, is to reproduce, after evolution, we can establish Flooding Evacuation Path that more reflect really human action and choice when flood takes place. However we can apply GA to calculate different evacuation path in different time series. Final, we compare and establish real model of evacuation path model to choosing flooding evacuation path.
series	CAADRIA
email
last changed	2022/06/07 07:52

_id	sigradi2004_320
id	sigradi2004_320
authors	Rodrigo García Alvarado; Gino Alvarez; Juan Carlos Parra; Cristían Berrios
year	2004
title	Geometria del movimiento: Desplazamientos del punto de vista en animaciones arquitectónicas [Geometry of Movement: Displacements of the Viewpoint in Architectural Animations]
source	SIGraDi 2004 - [Proceedings of the 8th Iberoamerican Congress of Digital Graphics] Porte Alegre - Brasil 10-12 november 2004
summary	It proposes geometrical characteristics of point-of-view displacements in architectural animations, based on analysis of camera movements in filmic presentations of buildings. Suggesting types, paths and velocities of movements to do expressive visualizations of architectural models. It mentions also a general method, computer programming and examples of the principles studied, those demonstrate geometrical regularities of movements related to meaningful understanding of space.
series	SIGRADI
email
last changed	2016/03/10 09:59

_id	041123sowa-a
id	041123sowa-a
authors	Sowa, Agnieszka
year	2004
title	Generation and optimization of complex and irregular construction/structure on example of NDS2004 final project
source	ETH postgraduate studies final thesis, Zurich
summary	During the postgraduate studies in CAAD at ETH the research is mainly focused on computer based architectural design and its automatic production. Usually the way from an architectural idea to production starts with creating of a digital model of the structure which is than transformed into data which can be used by CNC machines. The final group work of NDS 2004students also follows this schema. This thesis is centered on its first element–computer aided architectural design.The aim of the research was to create a programming tool which generate linear construction grids for a cubic form and then optimize them according to given parameters. The data produced during this process is then visualized by digital models which can be evaluated by a designer as ready for production or can be changed in a further design process. Eventually, this data is an input for scripting tools creating production drawings for CNC machines. The thesis contains information about the mathematical description of the structure, methods of its generation, analysis and optimization. It deals also with problems connected with data exchange and storage. The effect of the work is presented by visualizations of digital models as well as by using rapid prototyping methods. Moreover, the most spectacular result of using tools presented in this thesis is the NDS2004 exhibition structure.
series	thesis:MSc
email
last changed	2005/09/09 12:58

_id	ddss2004_d-63
id	ddss2004_d-63
authors	Wen, K.-C. and W.-L. Chen
year	2004
title	Applying Genetic Algorithms to Establish Disaster Decision Support System for Flooding Evacuation Path of Hsichih Area in Taiwan
source	Van Leeuwen, J.P. and H.J.P. Timmermans (eds.) Developments in Design & Decision Support Systems in Architecture and Urban Planning, Eindhoven: Eindhoven University of Technology, ISBN 90-6814-155-4, p. 63-75
summary	Because of the special geography features and subtropics weather in Taiwan, we need to provide correct information to help people making decision when they are in disaster. So the disaster decision support system must offer proper information of evacuation path to people. This research has shown the difficulties associated with the GIS and the flooding evacuation path search through the huge searching space generated during the network analysis process. This research also presents an approach to these problems by utilizing a search process whose concept is derived from natural genetics. Genetic algorithms (GAs) have been introduced in the optimization problem solving area by Holland (1975) and Goldberg (1989) and have shown their usefulness through numerous applications. We apply GA and GIS to choice flooding evacuation path in metropolitan area in this study. We take the region of Shiji city in Taiwan for case. Firstly, we establish the node relationship of GA calculation, the level of the weight is the standard of the date that is exported by Disaster Database. Secondly, we apply GA to calculate different evacuation path in different time series. Finally, we build the model of choosing flooding evacuation path.
keywords	Genetic Algorithms, Decision Support System, GIS, Evacuation Path
series	DDSS
last changed	2004/07/03 22:13

_id	sigradi2004_333
id	sigradi2004_333
authors	Andrés S. Rodríguez
year	2004
title	Exploración de relaciones entre analogías y bocetos durante la generación de ideas en diseño industrial como elicitación de requerimientos para CAD [Exploration of Relations between Analogies and Sketches During the Generation of Ideas in Industrial Design for Eliciting CAD Requirements]
source	SIGraDi 2004 - [Proceedings of the 8th Iberoamerican Congress of Digital Graphics] Porte Alegre - Brasil 10-12 november 2004
summary	An exploration on the analogy-based idea generation process in industrial design is reported. In particular we try to identify relationships between the sketching process and the analogy building in order to elicit requirements for a supporting software. We use concurrent think aloud protocols to obtain experimental data and an extension of a proved content oriented schema to analyze them. Statistical analysis on segments containing .analogical chains. found relations between analogical and design actions that allow us to support the hypothesis that the sketch seems to be more useful for helping the analytical aspects of the analogical making (i.e. to code a situation in terms of higher order relations) than the synthetic ones (i.e. to identify an analogy source). Results were interpreted as software requirements for a Computer Aided Design Application.
keywords	Sketching, Analogy, CAD, Industrial design, Protocol analysis
series	SIGRADI
email
last changed	2016/03/10 09:47

_id	avocaad_2003_06
id	avocaad_2003_06
authors	Arturo F. Montagu and Juan Pablo Cieri
year	2003
title	Urbamedia - Development of an urban database of fragments of some Argentinian and Latin-American cities using digital technology
source	LOCAL VALUES in a NETWORKED DESIGN WORLD - ADDED VALUE OF COMPUTER AIDED ARCHITECTURAL DESIGN, Stellingwerff, Martijn and Verbeke, Johan (Eds.), (2004) DUP Science - Delft University Press, ISBN 90-407-2507-1.
summary	The proposal of "Urbamedia" is to undertake the development of 3D virtual and interactive models of historical areas of Latin-American cities. The selected zone is the "Mayo Avenue" including the "Mayo Square", an historical place of the city of Buenos Aires, Argentina; this project is financed by the National Agency of Scientific and Technological Development of Argentina and the University of Buenos Aires.We are presenting the first experimental model of the "Mayo Square" that has been developed at ABACUS, Department of Architecture & Building Aids Computer Unit, University of Strathclyde UK. combined with a system analysis of urban activities using the “Atlas.ti” CAQDAS software.This particular use of the “Atlas.ti” software is under experimental applications to this type of urban analysis procedures; allowed us the possibility to analysed a set of activities by means of graph theory as result of a series of interviews to the people working in the area. We are also looking to include historical areas of three cities: Mar del Plata, Rosario and Santa Fe (Argentina) and eventually other cities from Latin América as Rio de Janeiro and Habana.Due that ABACUS has a strong experience in city modelling plus the powerful software and hardware used there, we must develop a VRML customized menu to be adapted to our low cost PC equipment. The 3D model will be used mainly in urban design simulation procedures and the idea is to extend to other type of simulations of the environmental parameters.
keywords	Architecture, Local values, Globalisation, Computer Aided Architectural Design
series	AVOCAAD
email
last changed	2006/01/16 21:38

_id	ddss2004_ra-161
id	ddss2004_ra-161
authors	Bandini, S., S. Manzoni, and G. Vizzari
year	2004
title	Crowd Modeling and Simulation
source	Van Leeuwen, J.P. and H.J.P. Timmermans (eds.) Recent Advances in Design & Decision Support Systems in Architecture and Urban Planning, Dordrecht: Kluwer Academic Publishers, ISBN: 1-4020-2408-8, p. 161-175
summary	The paper introduces a Multi Agent Systems (MAS) approach to crowd modelling and simulation, based on the Situated Cellular Agents (SCA) model. This is a special class of Multilayered Multi Agent Situated System (MMASS), exploiting basic elements of Cellular Automata. In particular SCA model provides an explicit spatial representation and the definition of adjacency geometries, but also a concept of autonomous agent, provided with an internal architecture, an individual state and behaviour. The latter provides different means of space-mediated interaction among agents: synchronous, between adjacent agents, and asynchronous among at-a-distance entities. Heterogeneous entities may be modelled through the specification of different agent types, defining different behaviours and perceptive capabilities. After a brief description of the model, its application to simple crowd behaviours will be given, and an application providing the integration of a bidimensional simulator based on this model and a 3D modelling application (3D Studio) will also be described. The adoption of this kind of system allows the specification and simulation of an architectural design with reference to the behaviour of entities that will act in it. The system is also able to easily produce a realistic visualization of the simulation, in order to facilitate the evaluation of the design and the communication with involved decision-makers. In fact, while experts often require only abstract and analytical results deriving from a quantitative analysis of simulation results, other people involved in the decision-making process related to the design may be helped by qualitative aspects better represented by other forms of graphical visualization.
keywords	Multi-Agent Systems, 3D modelling, Simulation
series	DDSS
last changed	2004/07/03 22:13

_id	eaea2003_28-barchougova
id	eaea2003_28-barchougova
authors	Bartchougova, E. and Rochegova, N.
year	2004
title	About Virtual Spatial Modeling in Architectural Education
source	Spatial Simulation and Evaluation - New Tools in Architectural and Urban Design [Proceedings of the 6th European Architectural Endoscopy Association Conference / ISBN 80-227-2088-7], pp. 138-142
summary	The professional perception of the architectural space characterizes the most advanced level of the architect’s mastership. In the article the virtual modeling is regarded as an effective way of forming the professional perception of integrity of architectural space. Computer technologies bring together bi-dimensional and three-dimensional languages of modeling and thus they help the procedure of movement of consciousness from the plane to volumetric images and back to the visual and mobile. They help to carry out the level-by-level analysis of the multilevel structure of an architectural reality in the mode of active dialogue. The process of interaction of consciousness with the model becomes accessible to studying. There appears an opportunity to manage this process with the aim of forming perception.
series	EAEA
more	http://info.tuwien.ac.at/eaea
last changed	2005/09/09 10:43

_id	ddss2004_d-269
id	ddss2004_d-269
authors	Beetz, J., J. van Leeuwen, and B. de Vries
year	2004
title	Towards a Multi Agent System for the Support of Collaborative Design
source	Van Leeuwen, J.P. and H.J.P. Timmermans (eds.) Developments in Design & Decision Support Systems in Architecture and Urban Planning, Eindhoven: Eindhoven University of Technology, ISBN 90-6814-155-4, p. 269-280
summary	In this paper we are drafting the outline of a framework for a Multi Agent System (MAS) for the support of Collaborative Design in the architectural domain. The system we are proposing makes use of Machine Learning (ML) techniques to infer personalized knowledge from observing a users’ action in a generic working environment using standard tools such as CAD packages. We introduce and discuss possible strategies to combine Concept Modelling (CM)-based approaches using existing ontologies with statistical analysis of action sequences within a domain specific application. In a later step, Agent technologies will be used to gather additional related information from external resources such as examples of similar problems on the users hard disk, from corresponding work of team-members within an intranet or from advises of expert from different knowledge domains, themselves represented by agents. As users deny or reward resulting proposals offered by the agent(s) through an interface the system will be enhanced over time using methods like Reinforced Learning.
keywords	Multi Agent Systems, Design & Decision Support Systems, Collaborative Design, Human Computer Interfaces, Machine learning, Data Mining
series	DDSS
last changed	2004/07/03 22:13

_id	acadia04_186
id	acadia04_186
authors	Bell, Bradley
year	2004
title	Digital Tectonics: Structural Patterning of Surface Morphology
doi	https://doi.org/10.52842/conf.acadia.2004.186
source	Fabrication: Examining the Digital Practice of Architecture [Proceedings of the 23rd Annual Conference of the Association for Computer Aided Design in Architecture and the 2004 Conference of the AIA Technology in Architectural Practice Knowledge Community / ISBN 0-9696665-2-7] Cambridge (Ontario) 8-14 November, 2004, 186-201
summary	The computer in architectural design has shifted from its role as a merely representational device to that of a tool for instrumentalized simulation and fabrication. The desire to make buildings look like a rendering, or to produce photo-realistic images and walkthroughs has given way to an opening of the potentials of software to assist the designer with managing complex geometries, parametric organizational diagrams, structural analysis, and integrated building systems. Simulation has become the means by which virtual space becomes more than just a mirror of reality. It becomes the space within which different potential realities can be tested and evaluated before they are materially implemented. In architecture, information derived from material constraints to site conditions can be constantly fed into the computer models to provide an accurate update, which in turn introduces feedback into the overall design, and change can then be registered in the detail.
keywords	surface, patterns, structure, CAD/CAM, fabrication
series	ACADIA
email
last changed	2022/06/07 07:54

_id	ascaad2004_paper9
id	ascaad2004_paper9
authors	Bennadji, A.; H. Ahriz, and P. Alastair
year	2004
title	Computer Aided Sustainable Design
source	eDesign in Architecture: ASCAAD's First International Conference on Computer Aided Architectural Design, 7-9 December 2004, KFUPM, Saudi Arabia
summary	One of the most important aspects architects need to consider fairly early on is that of energy saving, cost, thermal comfort and the effect on the environment in terms of CO2 emissions. At present, during the early design stage of a building, different options are assessed using simple tools (tables, graphs and software) that contain a large number of assumptions the very nature of which can bias choice or possibly lead to an inappropriate solution. It can be argued that the only way to provide a rational assessment of options is to use calculation methods that represent in detail the physical processes involved; this usually involves the use of dynamic thermal models. Furthermore if this tool is also used during detailed design it would introduce a consistency that is normally absent from the analytical design process. Many designers are of the opinion that, because not all details are known, then such tools are not suitable for application at early stages in the design. This view can be challenged because, even at the concept stage, a great deal is known about a building. This paper aims to show that a general description of a building can be used to generate sufficient data to drive a valid analysis using a detailed thermal model at the early sketch stage of the design process. The paper describes the philosophy, methodology and the interface developed to achieve this aim. The interface guides the user through the input process using a series of screens giving options for keywords used to describe the building; comprehensive default data built into the software are then attached to these keywords. The resulting data file is a building description that is the best possible interpretation of the design intent. This can then be used to assess options and guide towards a final design.
series	ASCAAD
email
last changed	2007/04/08 19:47

_id	ddss2004_ra-247
id	ddss2004_ra-247
authors	Bi, G. and B. Medjdoub
year	2004
title	Hybrid Approach to Solve Space Planning Problems in Building Services
source	Van Leeuwen, J.P. and H.J.P. Timmermans (eds.) Recent Advances in Design & Decision Support Systems in Architecture and Urban Planning, Dordrecht: Kluwer Academic Publishers, ISBN: 1-4020-2408-8, p. 247-261
summary	In this paper an object-based CAD programming is used to take advantage of standardization to handle the schematic design, sizing, layout for services in a building ceiling void. From the specification of the building 3D model, our software proceeds through different steps; from the determination of the standard number and size of fan coils to the generation of 3D solutions. In order to deal with more complex geometry and larger problems, we have used a hybrid approach: Case Based Reasoning (CBR) within Constraint Satisfaction Problem (CSP) approaches. In practice, engineers in building services use previous solutions and adapt them to new problems. CBR mirrors this practical approach and does help us to deal with increasingly complex geometry effectively, and meanwhile CSP has been used for layout adaptation. The results have shown that it is possible to define and implement standard solutions to produce designs comparable with current practice. The benchmarking exercise has underlined many advantages and made some suggestions for further development. This project is funded by The Engineering and Physical Sciences Research Council (EPSRC) in UK.
keywords	Case-Based Reasoning, Constraint Satisfaction Problem, Ceiling Voids Layout, Complex Geometry, Large Problem
series	DDSS
last changed	2004/07/03 22:13

_id	acadia07_174
id	acadia07_174
authors	Bontemps, Arnaud; Potvin, André; Demers, Claude
year	2007
title	The Dynamics of Physical Ambiences
doi	https://doi.org/10.52842/conf.acadia.2007.174
source	Expanding Bodies: Art • Cities• Environment [Proceedings of the 27th Annual Conference of the Association for Computer Aided Design in Architecture / ISBN 978-0-9780978-6-8] Halifax (Nova Scotia) 1-7 October 2007, 174-181
summary	This research proposes to support the reading of physical ambiences by the development of a representational technique which compiles, in a numerical interface, two types of data: sensory and filmic. These data are recorded through the use of a portable array equipped with sensors (Potvin 1997, 2002, 2004) as well as the acquisition of Video information of the moving environment. The compilation of information is carried out through a multi-media approach, by means of a program converting the environmental data into dynamic diagrams, as well as the creation of an interactive interface allowing a possible diffusion on the Web. This technique, named APMAP/Video, makes it possible to read out simultaneously spatial and environmental diversity. It is demonstrated through surveys taken at various seasons and time of the day at the new Caisse de dépôt et de placement headquarters in Montreal which is also the corpus for a SSHRC (Social Sciences and Humanities Research Council) research grant on Environmental Adaptability in Architecture (Potvin et al. 2003-2007). This case study shows that the technique can prove of great relevance for POEs (Post Occupancy Evaluation) as well as for assistance in a new design project.
series	ACADIA
email
last changed	2022/06/07 07:54

_id	cf2011_p157
id	cf2011_p157
authors	Boton, Conrad; Kubicki Sylvain, Halin Gilles
year	2011
title	Understanding Pre-Construction Simulation Activities to Adapt Visualization in 4D CAD Collaborative Tools
source	Computer Aided Architectural Design Futures 2011 [Proceedings of the 14th International Conference on Computer Aided Architectural Design Futures / ISBN 9782874561429] Liege (Belgium) 4-8 July 2011, pp. 477-492.
summary	Increasing productivity and efficiency is an important issue in the AEC field. This area is mainly characterized by fragmentation, heterogeneous teams with low lifetimes and many uncertainties. 4D CAD is one of the greatest innovations in recent years. It consists in linking a 3D model of the building with the works planning in order to simulate the construction evolution over time. 4D CAD can fill several needs from design to project management through constructivity analysis and tasks planning (Tommelein 2003). The literature shows that several applications have been proposed to improve the 4D CAD use (Chau et al. 2004; Lu et al. 2007; Seok & al. 2009). In addition, studies have shown the real impact of 4D CAD use in construction projects (Staub-French & Khanzode 2007; Dawood & Sika 2007). More recently, Mahalingam et al. (2010) showed that the collaborative use of 4D CAD is particularly useful during the pre-construction phase for comparing the constructability of working methods, for visually identifying conflicts and clashes (overlaps), and as visual tool for practitioners to discuss and to plan project progress. So the advantage of the 4D CAD collaborative use is demonstrated. Moreover, several studies have been conducted both in the scientific community and in the industrial world to improve it (Zhou et al. 2009; Kang et al. 2007). But an important need that remains in collaborative 4D CAD use in construction projects is about the adaptation of visualization to the users business needs. Indeed, construction projects have very specific characteristics (fragmentation, variable team, different roles from one project to another). Moreover, in the AEC field several visualization techniques can represent the same concept and actors choose one or another of these techniques according to their specific needs related to the task they have to perform. For example, the tasks planning may be represented by a Gantt chart or by a PERT network and the building elements can be depicted with a 3D model or a 2D plan. The classical view (3D + Gantt) proposed to all practitioners in the available 4D tools seems therefore not suiting the needs of all. So, our research is based on the hypothesis that adapting the visualization to individual business needs could significantly improve the collaboration. This work relies on previous ones and aim to develop a method 1) to choose the best suited views for performed tasks and 2) to compose adapted multiple views for each actor, that we call ‚Äúbusiness views‚Äù. We propose a 4 steps-method to compose business views. The first step identifies the users‚Äô business needs, defining the individual practices performed by each actor, identifying his business tasks and his information needs. The second step identifies the visualization needs related to the identified business needs. For this purpose, the user‚Äôs interactions and visualization tasks are described. This enables choosing the most appropriate visualization techniques for each need (step 3). At this step, it is important to describe the visualization techniques and to be able to compare them. Therefore, we proposed a business view metamodel. The final step (step 4) selects the adapted views, defines the coordination mechanisms and the interaction principles in order to compose coordinated visualizations. A final step consists in a validation work to ensure that the composed views really match to the described business needs. This paper presents the latest version of the method and especially presents our latest works about its first and second steps. These include making more generic the business tasks description in order to be applicable within most of construction projects and enabling to make correspondence with visualization tasks.
keywords	Pre-construction, Simulation, 4D CAD, Collaboration, Computer Supported Cooperative Work, Human-Computer Interface, Information visualization, Business view, Model driven engineering
series	CAAD Futures
email
last changed	2012/02/11 19:21

_id	sigradi2004_286
id	sigradi2004_286
authors	Bruno Massara Rocha
year	2004
title	Diagramas e cidades: Tecnologia digital aplicada na construção de interfaces gráficas e diagramas de análise para dinâmicas territoriais em grande escala [Diagrams and Cities: Digital Technology Applied to the Construction of Graphic Interfaces and Diagrams for the Analysis for Large-Scale Territorial Dynamics]
source	SIGraDi 2004 - [Proceedings of the 8th Iberoamerican Congress of Digital Graphics] Porte Alegre - Brasil 10-12 november 2004
summary	This research has a goal to verify the applicability of the new multimídia authoring tool as a usefull resource for architects and urban planners in analyzing large virtual processes that intervene in the production of the urban space. The Macromedia Director has shown an important device for crossing informationg and processes visualization. As a digital interactive interface the software Macromedia Director offers possibilities to particular accesses of the most various kinds of files and formats, and has great potential for architecture as an agent discipline.
keywords	Interactive Digital Interface, Territorial Urban Dynamics
series	SIGRADI
email
last changed	2016/03/10 09:47

For more results click below: