Cumincad : CUMINCAD Papers : Search Results

CumInCAD is a Cumulative Index about publications in Computer Aided Architectural Design
supported by the sibling associations ACADIA, CAADRIA, eCAADe, SIGraDi, ASCAAD and CAAD futures

PDF papers
References

Hits 1 to 20 of 566

Reformat results as: short short into frame detailed detailed into frame

_id	2004_396
id	2004_396
authors	Fischer, Thomas
year	2004
title	Microcontroller - Enhanced Physical Models for Architectural and Product Design
doi	https://doi.org/10.52842/conf.ecaade.2004.396
source	Architecture in the Network Society [22nd eCAADe Conference Proceedings / ISBN 0-9541183-2-4] Copenhagen (Denmark) 15-18 September 2004, pp. 396-403
summary	Electronic sensors, controllers, displays and actuators can significantly enhance the value of physical models as processes of use, interaction and transformation take center stage in various fields of design. These technologies allow the development of novel computer interfaces for new kinds of interaction with virtual models, and in the future they will allow new types of active building components and materials for automated construction and dynamic runtime adaptations of inhabitable environments. However, embedding programmed logic into physical objects seems to confront designers and model makers with a steep learning curve outside the domains of their traditional expertise. The variety of alternative technologies and development tools in this area has a particularly disorienting effect on novices. Some early experiences however suggest that mastery of this learning curve is easily within reach, given some basic introduction, guidance and support. It is the purpose of this paper to provide designers with a starting point for explorations into this area, to give orientation and to demonstrate some possible development approaches and results.
keywords	Interaction, Process, High-Fidelity Models, Microcontrollers, Electronics
series	eCAADe
last changed	2022/06/07 07:51

_id	ddss2004_ra-19
id	ddss2004_ra-19
authors	Akamine, A. and A. Nélson Rodrigues da Silva
year	2004
title	An Evaluation of Neural Spatial Interaction Models Based on a Practical Application
source	Van Leeuwen, J.P. and H.J.P. Timmermans (eds.) Recent Advances in Design & Decision Support Systems in Architecture and Urban Planning, Dordrecht: Kluwer Academic Publishers, ISBN: 1-4020-2408-8, p. 19-32
summary	One of the serious problems faced by the Brazilian municipalities is the scarcity of resources for building education infrastructure. This asks for an optimal allocation of the available resources that includes, among other things, a rational spatial arrangement of the supply points (i.e., schools) in order to increase the demand coverage (i.e., students). If it is possible to foresee the regions where the demand is going to be concentrated, it is then possible to plan the location of new facilities and to assess the impact on the future level of service of the entire system. Considering that one of the consequences of the location-allocation process is the distribution of trips from demand points to supply points throughout the city, therefore affecting the overall intraurban accessibility conditions to essential services such as education, there is a strong need of models that planners can rely on to predict the future trip distribution patterns. As a result, the objective of this work was to evaluate the performance of Artificial Neural Networks (ANN) when applied to spatial interaction models, the so-called Neural Spatial Interaction Models. This was done in a practical context, in contrast to the more theoretical works commonly found in literature. The practical application showed that the neural spatial interaction model had different performances when compared to the traditional gravity models. In one case the neural models outperformed the gravity models, while on the other case it was just the opposite. The explanation for this may be in the data or in the ANN model formulation, as discussed in the conclusions.
keywords	Artificial Neural Networks, Spatial Interaction Models, Education Infrastructure
series	DDSS
last changed	2004/07/03 22:13

_id	sigradi2004_120
id	sigradi2004_120
authors	Alfonso Corona Martínez; Libertad Vigo; Cristián Buacar; Sebastián Rubbo
year	2004
title	En el taller de proyecto, dónde está la arquitectura? [In the Design Studio, Where is the Architecture? ]
source	SIGraDi 2004 - [Proceedings of the 8th Iberoamerican Congress of Digital Graphics] Porte Alegre - Brasil 10-12 november 2004
summary	This study is placed on the research line of Pedagogical practice and formation of the educator, which theme is related to learning in virtual worlds. The article presents and discusses some aspects of the process of approaching subjects (teachers) to a Virtual World, at a first moment, in a level of exploration, experimentation, interaction as a user, and, at a second moment as a creator, an author of a Virtual World, AWSINOS. The present study takes part of a exploratory/experimental research of qualitative nature that looks for the creation of virtual worlds for the continued qualification online and focuses on the investigation of socio-cognitive behaviors of subjects during their organization as a group and during the activity of building and using these worlds.
keywords	Virtual worlds, learning, continued qualification, avatars
series	SIGRADI
email
last changed	2016/03/10 09:47

_id	acadia04_282
id	acadia04_282
authors	Anders, Peter
year	2004
title	Arch-OS: An Implementation of Cybrid Strategies
doi	https://doi.org/10.52842/conf.acadia.2004.282
source	Fabrication: Examining the Digital Practice of Architecture [Proceedings of the 23rd Annual Conference of the Association for Computer Aided Design in Architecture and the 2004 Conference of the AIA Technology in Architectural Practice Knowledge Community / ISBN 0-9696665-2-7] Cambridge (Ontario) 8-14 November, 2004, 282-293
summary	A review of the literature on Intelligent Buildings suggests an ideal of a building as an autonomous system that controls its internal and external environments. The model, whose origin lies with early models of artificial intelligence, effectively treats the building as a slave to human needs, and appears to invest more intelligence in the building than in its occupants. This paper proposes that automated environments be understood as extensions of human sense and awareness. It describes an operating system, Arch-OS, that exemplifies this approach by increasing building occupants’ consciousness of their environment.
keywords	Cybrid, Mixed Reality, Responsive Environment, Planetary Collegium
series	ACADIA
email
last changed	2022/06/07 07:54

_id	ascaad2006_paper29
id	ascaad2006_paper29
authors	Bennadji, A. and A. Bellakha
year	2006
title	Evaluation of a Higher Education Self-learning Interface
source	Computing in Architecture / Re-Thinking the Discourse: The Second International Conference of the Arab Society for Computer Aided Architectural Design (ASCAAD 2006), 25-27 April 2006, Sharjah, United Arab Emirates
summary	This paper is a follow-up to a previous paper published in ASCAAD 2004 (A. Bennadji et al 2005). The latter reported on CASD (Computer Aided Sustainable Design) a self-learning educational interface which assists the various building’s actors in their design with a particular attention to the aspect of energy saving. This paper focuses on the importance of software evaluation and how the testing is done to achieve a better human-machine interaction. The paper will go through the summative evaluation of CASD, presents the output of this evaluation and addresses the challenge facing software developers: how to make an interface accessible to all users and specifically students in higher education.
series	ASCAAD
email
last changed	2007/04/08 19:47

_id	cf2011_p157
id	cf2011_p157
authors	Boton, Conrad; Kubicki Sylvain, Halin Gilles
year	2011
title	Understanding Pre-Construction Simulation Activities to Adapt Visualization in 4D CAD Collaborative Tools
source	Computer Aided Architectural Design Futures 2011 [Proceedings of the 14th International Conference on Computer Aided Architectural Design Futures / ISBN 9782874561429] Liege (Belgium) 4-8 July 2011, pp. 477-492.
summary	Increasing productivity and efficiency is an important issue in the AEC field. This area is mainly characterized by fragmentation, heterogeneous teams with low lifetimes and many uncertainties. 4D CAD is one of the greatest innovations in recent years. It consists in linking a 3D model of the building with the works planning in order to simulate the construction evolution over time. 4D CAD can fill several needs from design to project management through constructivity analysis and tasks planning (Tommelein 2003). The literature shows that several applications have been proposed to improve the 4D CAD use (Chau et al. 2004; Lu et al. 2007; Seok & al. 2009). In addition, studies have shown the real impact of 4D CAD use in construction projects (Staub-French & Khanzode 2007; Dawood & Sika 2007). More recently, Mahalingam et al. (2010) showed that the collaborative use of 4D CAD is particularly useful during the pre-construction phase for comparing the constructability of working methods, for visually identifying conflicts and clashes (overlaps), and as visual tool for practitioners to discuss and to plan project progress. So the advantage of the 4D CAD collaborative use is demonstrated. Moreover, several studies have been conducted both in the scientific community and in the industrial world to improve it (Zhou et al. 2009; Kang et al. 2007). But an important need that remains in collaborative 4D CAD use in construction projects is about the adaptation of visualization to the users business needs. Indeed, construction projects have very specific characteristics (fragmentation, variable team, different roles from one project to another). Moreover, in the AEC field several visualization techniques can represent the same concept and actors choose one or another of these techniques according to their specific needs related to the task they have to perform. For example, the tasks planning may be represented by a Gantt chart or by a PERT network and the building elements can be depicted with a 3D model or a 2D plan. The classical view (3D + Gantt) proposed to all practitioners in the available 4D tools seems therefore not suiting the needs of all. So, our research is based on the hypothesis that adapting the visualization to individual business needs could significantly improve the collaboration. This work relies on previous ones and aim to develop a method 1) to choose the best suited views for performed tasks and 2) to compose adapted multiple views for each actor, that we call ‚Äúbusiness views‚Äù. We propose a 4 steps-method to compose business views. The first step identifies the users‚Äô business needs, defining the individual practices performed by each actor, identifying his business tasks and his information needs. The second step identifies the visualization needs related to the identified business needs. For this purpose, the user‚Äôs interactions and visualization tasks are described. This enables choosing the most appropriate visualization techniques for each need (step 3). At this step, it is important to describe the visualization techniques and to be able to compare them. Therefore, we proposed a business view metamodel. The final step (step 4) selects the adapted views, defines the coordination mechanisms and the interaction principles in order to compose coordinated visualizations. A final step consists in a validation work to ensure that the composed views really match to the described business needs. This paper presents the latest version of the method and especially presents our latest works about its first and second steps. These include making more generic the business tasks description in order to be applicable within most of construction projects and enabling to make correspondence with visualization tasks.
keywords	Pre-construction, Simulation, 4D CAD, Collaboration, Computer Supported Cooperative Work, Human-Computer Interface, Information visualization, Business view, Model driven engineering
series	CAAD Futures
email
last changed	2012/02/11 19:21

_id	410caadria2004
id	410caadria2004
authors	Chiung-Hui Chen, Hui-Tin Lin, Mao-Lin Chiu
year	2004
title	A Scenario-Based Agent System for Digital City Interaction
doi	https://doi.org/10.52842/conf.caadria.2004.693
source	CAADRIA 2004 [Proceedings of the 9th International Conference on Computer Aided Architectural Design Research in Asia / ISBN 89-7141-648-3] Seoul Korea 28-30 April 2004, pp. 693-706
summary	Urban design involves coordination and communication for collecting consensus among citizens and developing the design strategy and spatial program. While these are web-based systems for representing the real world actions, there is lack of human interaction for receiving feedbacks during the process. Therefore, the purpose of this study is to introduce the agents into the participatory design process (PDP) based on scenarios. This paper has developed a webbased system prototype to demonstrate how the agent can interact with users and how the interface facilitates incremental design. We present a participatory design project in an old street to illustrate how the Scenario-Based Agent System (SBAS) model functions in a real application. Meanwhile, four issues will be discussed in regarding with building a learning interaction agent as an actor.
series	CAADRIA
email
last changed	2022/06/07 07:56

_id	20ff
id	20ff
authors	Derix, Christian
year	2004
title	Building a Synthetic Cognizer
source	Design Computation Cognition conference 2004, MIT
summary	Understanding ‘space’ as a structured and dynamic system can provide us with insight into the central concept in the architectural discourse that so far has proven to withstand theoretical framing (McLuhan 1964). The basis for this theoretical assumption is that space is not a void left by solid matter but instead an emergent quality of action and interaction between individuals and groups with a physical environment (Hillier 1996). In this way it can be described as a parallel distributed system, a self-organising entity. Extrapolating from Luhmann’s theory of social systems (Luhmann 1984), a spatial system is autonomous from its progenitors, people, but remains intangible to a human observer due to its abstract nature and therefore has to be analysed by computed entities, synthetic cognisers, with the capacity to perceive. This poster shows an attempt to use another complex system, a distributed connected algorithm based on Kohonen’s self-organising feature maps – SOM (Kohonen 1997), as a “perceptual aid” for creating geometric mappings of these spatial systems that will shed light on our understanding of space by not representing space through our usual mechanics but by constructing artificial spatial cognisers with abilities to make spatial representations of their own. This allows us to be shown novel representations that can help us to see new differences and similarities in spatial configurations.
keywords	architectural design, neural networks, cognition, representation
series	other
type	poster
email
more	http://www.springer.com/computer/ai/book/978-1-4020-2392-7
last changed	2012/09/17 21:13

_id	acadia04_138
id	acadia04_138
authors	Surjan, Terry
year	2004
title	Appealing to the Masses, or Serious Play with Blocks
doi	https://doi.org/10.52842/conf.acadia.2004.138
source	Fabrication: Examining the Digital Practice of Architecture [Proceedings of the 23rd Annual Conference of the Association for Computer Aided Design in Architecture and the 2004 Conference of the AIA Technology in Architectural Practice Knowledge Community / ISBN 0-9696665-2-7] Cambridge (Ontario) 8-14 November, 2004, 138-149
summary	With a certain budget and limited access to a Computer-Numerically-Controlled mill, fourth year architecture students were charged with the problem of designing a full-scale architectural space that could be assembled and re-assembled in various contexts and configurations. As the constraints for the design studio, an economy of capital ($150 per student) and an economy of means were devel¬oped to create and produce over 600 units of a flexible architectural component, and many variations, into a building system that could be assembled to create multiple formal and spatial configurations push¬ing the concept of Mass-Customization towards MASS-Appeal. After choosing a unit-multiple method as the most practical parti for designing a space which can be disassembled and reassembled in multiple configurations and contexts, the students developed the economy of their block unit based on a maximization of blocks per sheet of 4'x 4' Medium Density Fiberboard. 4' x 4' was the maximum size that could be cut on the CNC mill at the school of architecture. The cut sheet was developed such that less than 3% of the board would go to waste. The exploration of assembly with these components produced multiple block types and multiple connection types that gave flexibility to the designed system.
keywords	STL Blocks
series	ACADIA
email
last changed	2022/06/07 07:56

_id	ddss2004_d-283
id	ddss2004_d-283
authors	Van Bronswijk, J.E.M.H., L.G.H. Koren, and C.E.E. Pernot
year	2004
title	Adapting Epidemiological Methodologies to the Prediction of Health Effects of Built Environment Interventions
source	Van Leeuwen, J.P. and H.J.P. Timmermans (eds.) Developments in Design & Decision Support Systems in Architecture and Urban Planning, Eindhoven: Eindhoven University of Technology, ISBN 90-6814-155-4, p. 283-290
summary	The influence of built environments on vitality and productivity of users is paramount. Since the introduction of Industrial, Flexible and Demountable Building, domotics, smart buildings, in general: mass-produced, intelligent and learning built environments, tailored built environments are within reach. This has resulted in the need for methodologies to predict short-term and long-term health effects of different built-environment constellations. Epidemiology has developed and validated methods to assess changes in prevalence of inflictions and other unhealthy conditions, as well as the number of healthy and vital years in a life span. After analysing the relationships among building (services) parts and its combinations, health determinants (exposures) and health outcomes, we could adapt the healthy years assessment (DALY) to changes in construction (insulation, air tightness) and building services engineering (ventilation, heating) for dwellings under Dutch conditions. The most important conclusion is that natural ventilation, mechanical ventilation and balanced ventilation not only differ in their average health effect, but even more so in the size of the ranges of these effects. Other systems, such as heat pumps or photo voltaic cells are expensive but will become economically applicable when healthcare costs are taken into account. These outcomes gave valuable clues for product innovation and opened the possibility to model health in relation to built environments. The method could also be applied to quality classification systems for dwellings.
keywords	Health Prediction, Built Environment, Epidemiology, Modelling
series	DDSS
last changed	2004/07/03 22:13

_id	caadria2018_016
id	caadria2018_016
authors	Zahedi, Ata and Petzold, Frank
year	2018
title	Utilization of Simulation Tools in Early Design Phases Through Adaptive Detailing Strategies
doi	https://doi.org/10.52842/conf.caadria.2018.2.011
source	T. Fukuda, W. Huang, P. Janssen, K. Crolla, S. Alhadidi (eds.), Learning, Adapting and Prototyping - Proceedings of the 23rd CAADRIA Conference - Volume 2, Tsinghua University, Beijing, China, 17-19 May 2018, pp. 11-20
summary	Decisions taken at early stages of building design have a significant effect on the planning steps for the entire lifetime of the project as well as the performance of the building throughout its lifecycle (MacLeamy 2004). Building Information Modelling (BIM) could bring forward and enhance the planning and decision-making processes by enabling the direct reuse of data hold by the model for diverse analysis and simulation tasks (Borrmann et al. 2015). The architect today besides a couple of simplified simulation tools almost exclusively uses his know-how for evaluating and comparing design variants in the early stages of design. This paper focuses on finding new ways to facilitate the use of analytical and simulation tools during the important early phases of conceptual building design, where the models are partially incomplete. The necessary enrichment and proper detailing of the design model could be achieved by means of dialogue-based interaction concepts with analytical and simulation tools through adaptive detailing strategies. This concept is explained using an example scenario for design process. A generic description of the aimed dialog-based interface to various simulation tools will also be discussed in this paper using an example scenario.
keywords	BIM; Early Design Stages; Adaptive Detailing ; Communication Protocols; Design Variants
series	CAADRIA
email
last changed	2022/06/07 07:57

_id	caadria2007_675
id	caadria2007_675
authors	Huang, Joseph Chuen-Huei
year	2007
title	Decision Support System for Modular Houses
doi	https://doi.org/10.52842/conf.caadria.2007.x.x9q
source	CAADRIA 2007 [Proceedings of the 12th International Conference on Computer Aided Architectural Design Research in Asia] Nanjing (China) 19-21 April 2007
summary	Presently, only a small percentage of people in the world typically hire an architect to design and build a home which is tailored to their preference. Besides the architect’s fee, clients also need to wait an interminable time for design and construction. Factory-made prefabricated housing systems tried to solve this problem previously. However, most pioneers failed to address the issues of variability and individual needs (Kieran & Timberlake, 2004). Plants closed because they produced more than the market demand, and prefabricated housing provided less flexibility than the traditional stick-built housing. The advanced digital technology makes it possible to communicate design ideas and concepts to others more effectively. The project delivery process leads itself to customization, embodying principles of lean production (Pine, 1993), flexible computer-integrated design interaction with clients, and reduced cycle times; all effecting rapid response between consumers and producers.
series	CAADRIA
email
last changed	2022/06/07 07:50

_id	sigradi2004_333
id	sigradi2004_333
authors	Andrés S. Rodríguez
year	2004
title	Exploración de relaciones entre analogías y bocetos durante la generación de ideas en diseño industrial como elicitación de requerimientos para CAD [Exploration of Relations between Analogies and Sketches During the Generation of Ideas in Industrial Design for Eliciting CAD Requirements]
source	SIGraDi 2004 - [Proceedings of the 8th Iberoamerican Congress of Digital Graphics] Porte Alegre - Brasil 10-12 november 2004
summary	An exploration on the analogy-based idea generation process in industrial design is reported. In particular we try to identify relationships between the sketching process and the analogy building in order to elicit requirements for a supporting software. We use concurrent think aloud protocols to obtain experimental data and an extension of a proved content oriented schema to analyze them. Statistical analysis on segments containing .analogical chains. found relations between analogical and design actions that allow us to support the hypothesis that the sketch seems to be more useful for helping the analytical aspects of the analogical making (i.e. to code a situation in terms of higher order relations) than the synthetic ones (i.e. to identify an analogy source). Results were interpreted as software requirements for a Computer Aided Design Application.
keywords	Sketching, Analogy, CAD, Industrial design, Protocol analysis
series	SIGRADI
email
last changed	2016/03/10 09:47

_id	sigradi2006_e131c
id	sigradi2006_e131c
authors	Ataman, Osman
year	2006
title	Toward New Wall Systems: Lighter, Stronger, Versatile
source	SIGraDi 2006 - [Proceedings of the 10th Iberoamerican Congress of Digital Graphics] Santiago de Chile - Chile 21-23 November 2006, pp. 248-253
summary	Recent developments in digital technologies and smart materials have created new opportunities and are suggesting significant changes in the way we design and build architecture. Traditionally, however, there has always been a gap between the new technologies and their applications into other areas. Even though, most technological innovations hold the promise to transform the building industry and the architecture within, and although, there have been some limited attempts in this area recently; to date architecture has failed to utilize the vast amount of accumulated technological knowledge and innovations to significantly transform the industry. Consequently, the applications of new technologies to architecture remain remote and inadequate. One of the main reasons of this problem is economical. Architecture is still seen and operated as a sub-service to the Construction industry and it does not seem to be feasible to apply recent innovations in Building Technology area. Another reason lies at the heart of architectural education. Architectural education does not follow technological innovations (Watson 1997), and that “design and technology issues are trivialized by their segregation from one another” (Fernandez 2004). The final reason is practicality and this one is partially related to the previous reasons. The history of architecture is full of visions for revolutionizing building technology, ideas that failed to achieve commercial practicality. Although, there have been some adaptations in this area recently, the improvements in architecture reflect only incremental progress, not the significant discoveries needed to transform the industry. However, architectural innovations and movements have often been generated by the advances of building materials, such as the impact of steel in the last and reinforced concrete in this century. There have been some scattered attempts of the creation of new materials and systems but currently they are mainly used for limited remote applications and mostly for aesthetic purposes. We believe a new architectural material class is needed which will merge digital and material technologies, embedded in architectural spaces and play a significant role in the way we use and experience architecture. As a principle element of architecture, technology has allowed for the wall to become an increasingly dynamic component of the built environment. The traditional connotations and objectives related to the wall are being redefined: static becomes fluid, opaque becomes transparent, barrier becomes filter and boundary becomes borderless. Combining smart materials, intelligent systems, engineering, and art can create a component that does not just support and define but significantly enhances the architectural space. This paper presents an ongoing research project about the development of new class of architectural wall system by incorporating distributed sensors and macroelectronics directly into the building environment. This type of composite, which is a representative example of an even broader class of smart architectural material, has the potential to change the design and function of an architectural structure or living environment. As of today, this kind of composite does not exist. Once completed, this will be the first technology on its own. We believe this study will lay the fundamental groundwork for a new paradigm in surface engineering that may be of considerable significance in architecture, building and construction industry, and materials science.
keywords	Digital; Material; Wall; Electronics
series	SIGRADI
email
last changed	2016/03/10 09:47

_id	acadia04_186
id	acadia04_186
authors	Bell, Bradley
year	2004
title	Digital Tectonics: Structural Patterning of Surface Morphology
doi	https://doi.org/10.52842/conf.acadia.2004.186
source	Fabrication: Examining the Digital Practice of Architecture [Proceedings of the 23rd Annual Conference of the Association for Computer Aided Design in Architecture and the 2004 Conference of the AIA Technology in Architectural Practice Knowledge Community / ISBN 0-9696665-2-7] Cambridge (Ontario) 8-14 November, 2004, 186-201
summary	The computer in architectural design has shifted from its role as a merely representational device to that of a tool for instrumentalized simulation and fabrication. The desire to make buildings look like a rendering, or to produce photo-realistic images and walkthroughs has given way to an opening of the potentials of software to assist the designer with managing complex geometries, parametric organizational diagrams, structural analysis, and integrated building systems. Simulation has become the means by which virtual space becomes more than just a mirror of reality. It becomes the space within which different potential realities can be tested and evaluated before they are materially implemented. In architecture, information derived from material constraints to site conditions can be constantly fed into the computer models to provide an accurate update, which in turn introduces feedback into the overall design, and change can then be registered in the detail.
keywords	surface, patterns, structure, CAD/CAM, fabrication
series	ACADIA
email
last changed	2022/06/07 07:54

_id	ascaad2004_paper9
id	ascaad2004_paper9
authors	Bennadji, A.; H. Ahriz, and P. Alastair
year	2004
title	Computer Aided Sustainable Design
source	eDesign in Architecture: ASCAAD's First International Conference on Computer Aided Architectural Design, 7-9 December 2004, KFUPM, Saudi Arabia
summary	One of the most important aspects architects need to consider fairly early on is that of energy saving, cost, thermal comfort and the effect on the environment in terms of CO2 emissions. At present, during the early design stage of a building, different options are assessed using simple tools (tables, graphs and software) that contain a large number of assumptions the very nature of which can bias choice or possibly lead to an inappropriate solution. It can be argued that the only way to provide a rational assessment of options is to use calculation methods that represent in detail the physical processes involved; this usually involves the use of dynamic thermal models. Furthermore if this tool is also used during detailed design it would introduce a consistency that is normally absent from the analytical design process. Many designers are of the opinion that, because not all details are known, then such tools are not suitable for application at early stages in the design. This view can be challenged because, even at the concept stage, a great deal is known about a building. This paper aims to show that a general description of a building can be used to generate sufficient data to drive a valid analysis using a detailed thermal model at the early sketch stage of the design process. The paper describes the philosophy, methodology and the interface developed to achieve this aim. The interface guides the user through the input process using a series of screens giving options for keywords used to describe the building; comprehensive default data built into the software are then attached to these keywords. The resulting data file is a building description that is the best possible interpretation of the design intent. This can then be used to assess options and guide towards a final design.
series	ASCAAD
email
last changed	2007/04/08 19:47

_id	ddss2004_ra-247
id	ddss2004_ra-247
authors	Bi, G. and B. Medjdoub
year	2004
title	Hybrid Approach to Solve Space Planning Problems in Building Services
source	Van Leeuwen, J.P. and H.J.P. Timmermans (eds.) Recent Advances in Design & Decision Support Systems in Architecture and Urban Planning, Dordrecht: Kluwer Academic Publishers, ISBN: 1-4020-2408-8, p. 247-261
summary	In this paper an object-based CAD programming is used to take advantage of standardization to handle the schematic design, sizing, layout for services in a building ceiling void. From the specification of the building 3D model, our software proceeds through different steps; from the determination of the standard number and size of fan coils to the generation of 3D solutions. In order to deal with more complex geometry and larger problems, we have used a hybrid approach: Case Based Reasoning (CBR) within Constraint Satisfaction Problem (CSP) approaches. In practice, engineers in building services use previous solutions and adapt them to new problems. CBR mirrors this practical approach and does help us to deal with increasingly complex geometry effectively, and meanwhile CSP has been used for layout adaptation. The results have shown that it is possible to define and implement standard solutions to produce designs comparable with current practice. The benchmarking exercise has underlined many advantages and made some suggestions for further development. This project is funded by The Engineering and Physical Sciences Research Council (EPSRC) in UK.
keywords	Case-Based Reasoning, Constraint Satisfaction Problem, Ceiling Voids Layout, Complex Geometry, Large Problem
series	DDSS
last changed	2004/07/03 22:13

_id	eaea2003_25-ws-breen
id	eaea2003_25-ws-breen
authors	Breen, J.
year	2004
title	Towards a Virtual Design Media Museum. Identifying, Structuring and Presenting Design and (Re) Presentation Media Artifacts
source	Spatial Simulation and Evaluation - New Tools in Architectural and Urban Design [Proceedings of the 6th European Architectural Endoscopy Association Conference / ISBN 80-227-2088-7], pp. 122-132
summary	Designing is largely a process of (inter)active imaging. The evolvement of a design concept from preliminary design proposal towards spatial and material environment generally follows an uncertain path through uncharted landscape; a journey of exploration which requires both rational and creative consideration, frequently involving the interchange of information within a design team and collaboration with representatives from different contributing disciplines. Designs are conceived, worked out and specified step by step (roughly speaking from ‘rough to fine’) in iterative design ‘loops’. All the time the designer tries to determine which ‘course’ should be taken, by considering reference material, by reflecting on conceptions developed previously and by generating specific options aimed at furthering the ‘concretisation’ of the end product. In the course of such a trajectory, visual information is continually being developed, selected, tested, and subsequently either discarded or perfected. From early times architects have been considered not only as knowledgeable ‘experts’ in the field of building as a craft, but also as ‘creative directors’ of such development processes. The architect should be capable of not only conjuring up visions of the future spatial and material form of the building, but also of conveying these to the other ‘actors’ involved in the initiation and building process. Such ‘sharing’ of information is necessary in order to generate sufficient understanding, consensus, enthusiasm, as well as means. To become more than ‘figments of the imagination’, the designer’s ideas need to be ‘pinned down’ (even if they are not yet entirely finished) and communicated by using some form of reliable – and preferably readable – ‘language’ for design development and communication.
series	EAEA
more	http://info.tuwien.ac.at/eaea
last changed	2005/09/09 10:43

_id	acadia11_138
id	acadia11_138
authors	Buell, Samantha; Shaban, Ryan; Corte, Daniel; Beorkrem, Christopher
year	2011
title	Zero-waste, Flat Pack Truss Work: An Investigation of Responsive Structuralism
doi	https://doi.org/10.52842/conf.acadia.2011.138
source	ACADIA 11: Integration through Computation [Proceedings of the 31st Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA)] [ISBN 978-1-6136-4595-6] Banff (Alberta) 13-16 October, 2011, pp. 138-143
summary	The direct and rapid connections between scripting, modeling and prototyping allow for investigations of computation in fabrication. The manipulation of planar materials with two-dimensional CNC cuts can easily create complex and varied forms, volumes, and surfaces. However, the bulk of research on folding using CNC fabrication tools is focused upon surfaces, self-supporting walls and shell structures, which do not integrate well into more conventional building construction models.This paper attempts to explain the potential for using folding methodologies to develop structural members through a design-build process. Conventional building practice consists of the assembly of off-the-shelf parts. Many times, the plinth, skeleton, and skin are independently designed and fabricated, integrating multiple industries. Using this method of construction as an operative status quo, this investigation focused on a single structural component: the truss. A truss is defined as: “A triangulated arrangement of structural members that reduces nonaxial external forces to a set of axial forces in its members.” (Allen and Iano 2004)Using folding methodologies and sheet steel to create a truss, this design investigation employed a recyclable and prolific building material to redefine the fabrication of a conventional structural member. The potential for using digital design and two-dimensional CNC fabrication tools in the design of a foldable truss from sheet steel is viable in the creation of a flat-packed, minimal waste structural member that can adapt to a variety of aesthetic and structural conditions. Applying new methods to a component of the conventional ‘kit of parts’ allowed for a novel investigation that recombines zero waste goals, flat-packing potential, structural expression and computational processes.
series	ACADIA
type	normal paper
email
last changed	2022/06/07 07:54

_id	ddss2008-33
id	ddss2008-33
authors	Charlton, James A.; Bob Giddings and Margaret Horne
year	2008
title	A survey of computer software for the urban designprocess
source	H.J.P. Timmermans, B. de Vries (eds.) 2008, Design & Decision Support Systems in Architecture and Urban Planning, ISBN 978-90-6814-173-3, University of Technology Eindhoven, published on CD
summary	Urban design is concerned with the shape, the surface and the physical arrangement of all kinds of urban elements, the basic components that make up the built environment, at the level of buildings, spaces and human activities. It is also concerned with the non-visual aspects of the environment, such as noise, wind and temperature and humidity. The city square is a particular urban element which can take many forms and its geometrical relationships such as maximum dimensions, ratio of width to length and building height to length have been analysed for centuries (Alberti 1475), (Vitruvius 1550), (Sitte 1889), (Corbett 2004). Within the current urban design process there are increasing examples of three dimensional computer representations which allow the user to experience a visual sense of the geometry of city squares in an urban landscape. Computer-aided design and Virtual Reality technologies have recently contributed to this visual assessment, but there have been limited attempts at 3D computer representations which allow the user to experience a greater sense of the urban space. This paper will describe a survey of computer tools which could support a more holistic approach to urban design and which could be used to simulate a number of urban texture and urban quality aspects. It will provide a systematic overview of currently available software that could support the simulation of building density, height, colour and style as well as conditions relating to noise, shading, heat, natural and artificial light. It will describe a methodology for the selection and filtering of appropriate computer applications and offer an initial evaluation of these tools for the analysis and representation of the three-dimensional geometry, urban texture and urban quality of city centre spaces. The paper is structured to include an introduction to the design criteria relating to city centre spaces which underpins this research. Next the systematic review of computer software will be described, and selected tools will undergo initial evaluation. Finally conclusions will be drawn and areas for future research identified.
keywords	Urban design, Software identification, 3D modelling, Pedestrian modelling, Wind modelling, Noise mapping, Thermal comfort, VR Engine
series	DDSS
last changed	2008/09/01 17:06

For more results click below: