Cumincad : CUMINCAD Papers : Search Results

CumInCAD is a Cumulative Index about publications in Computer Aided Architectural Design
supported by the sibling associations ACADIA, CAADRIA, eCAADe, SIGraDi, ASCAAD and CAAD futures

PDF papers
References

Hits 1 to 20 of 506

Reformat results as: short short into frame detailed detailed into frame

_id	ascaad2004_paper9
id	ascaad2004_paper9
authors	Bennadji, A.; H. Ahriz, and P. Alastair
year	2004
title	Computer Aided Sustainable Design
source	eDesign in Architecture: ASCAAD's First International Conference on Computer Aided Architectural Design, 7-9 December 2004, KFUPM, Saudi Arabia
summary	One of the most important aspects architects need to consider fairly early on is that of energy saving, cost, thermal comfort and the effect on the environment in terms of CO2 emissions. At present, during the early design stage of a building, different options are assessed using simple tools (tables, graphs and software) that contain a large number of assumptions the very nature of which can bias choice or possibly lead to an inappropriate solution. It can be argued that the only way to provide a rational assessment of options is to use calculation methods that represent in detail the physical processes involved; this usually involves the use of dynamic thermal models. Furthermore if this tool is also used during detailed design it would introduce a consistency that is normally absent from the analytical design process. Many designers are of the opinion that, because not all details are known, then such tools are not suitable for application at early stages in the design. This view can be challenged because, even at the concept stage, a great deal is known about a building. This paper aims to show that a general description of a building can be used to generate sufficient data to drive a valid analysis using a detailed thermal model at the early sketch stage of the design process. The paper describes the philosophy, methodology and the interface developed to achieve this aim. The interface guides the user through the input process using a series of screens giving options for keywords used to describe the building; comprehensive default data built into the software are then attached to these keywords. The resulting data file is a building description that is the best possible interpretation of the design intent. This can then be used to assess options and guide towards a final design.
series	ASCAAD
email
last changed	2007/04/08 19:47

_id	cf2011_p157
id	cf2011_p157
authors	Boton, Conrad; Kubicki Sylvain, Halin Gilles
year	2011
title	Understanding Pre-Construction Simulation Activities to Adapt Visualization in 4D CAD Collaborative Tools
source	Computer Aided Architectural Design Futures 2011 [Proceedings of the 14th International Conference on Computer Aided Architectural Design Futures / ISBN 9782874561429] Liege (Belgium) 4-8 July 2011, pp. 477-492.
summary	Increasing productivity and efficiency is an important issue in the AEC field. This area is mainly characterized by fragmentation, heterogeneous teams with low lifetimes and many uncertainties. 4D CAD is one of the greatest innovations in recent years. It consists in linking a 3D model of the building with the works planning in order to simulate the construction evolution over time. 4D CAD can fill several needs from design to project management through constructivity analysis and tasks planning (Tommelein 2003). The literature shows that several applications have been proposed to improve the 4D CAD use (Chau et al. 2004; Lu et al. 2007; Seok & al. 2009). In addition, studies have shown the real impact of 4D CAD use in construction projects (Staub-French & Khanzode 2007; Dawood & Sika 2007). More recently, Mahalingam et al. (2010) showed that the collaborative use of 4D CAD is particularly useful during the pre-construction phase for comparing the constructability of working methods, for visually identifying conflicts and clashes (overlaps), and as visual tool for practitioners to discuss and to plan project progress. So the advantage of the 4D CAD collaborative use is demonstrated. Moreover, several studies have been conducted both in the scientific community and in the industrial world to improve it (Zhou et al. 2009; Kang et al. 2007). But an important need that remains in collaborative 4D CAD use in construction projects is about the adaptation of visualization to the users business needs. Indeed, construction projects have very specific characteristics (fragmentation, variable team, different roles from one project to another). Moreover, in the AEC field several visualization techniques can represent the same concept and actors choose one or another of these techniques according to their specific needs related to the task they have to perform. For example, the tasks planning may be represented by a Gantt chart or by a PERT network and the building elements can be depicted with a 3D model or a 2D plan. The classical view (3D + Gantt) proposed to all practitioners in the available 4D tools seems therefore not suiting the needs of all. So, our research is based on the hypothesis that adapting the visualization to individual business needs could significantly improve the collaboration. This work relies on previous ones and aim to develop a method 1) to choose the best suited views for performed tasks and 2) to compose adapted multiple views for each actor, that we call ‚Äúbusiness views‚Äù. We propose a 4 steps-method to compose business views. The first step identifies the users‚Äô business needs, defining the individual practices performed by each actor, identifying his business tasks and his information needs. The second step identifies the visualization needs related to the identified business needs. For this purpose, the user‚Äôs interactions and visualization tasks are described. This enables choosing the most appropriate visualization techniques for each need (step 3). At this step, it is important to describe the visualization techniques and to be able to compare them. Therefore, we proposed a business view metamodel. The final step (step 4) selects the adapted views, defines the coordination mechanisms and the interaction principles in order to compose coordinated visualizations. A final step consists in a validation work to ensure that the composed views really match to the described business needs. This paper presents the latest version of the method and especially presents our latest works about its first and second steps. These include making more generic the business tasks description in order to be applicable within most of construction projects and enabling to make correspondence with visualization tasks.
keywords	Pre-construction, Simulation, 4D CAD, Collaboration, Computer Supported Cooperative Work, Human-Computer Interface, Information visualization, Business view, Model driven engineering
series	CAAD Futures
email
last changed	2012/02/11 19:21

_id	acadia04_150
id	acadia04_150
authors	Clarke, Cory
year	2004
title	The Siren's Call
doi	https://doi.org/10.52842/conf.acadia.2004.150
source	Fabrication: Examining the Digital Practice of Architecture [Proceedings of the 23rd Annual Conference of the Association for Computer Aided Design in Architecture and the 2004 Conference of the AIA Technology in Architectural Practice Knowledge Community / ISBN 0-9696665-2-7] Cambridge (Ontario) 8-14 November, 2004, 150-161
summary	This paper presents an account of our research and development of processes providing seamless transition from design to fabrication. The narrative of our design, development, and prototyping experi¬ments spans seven years, including our current project, the Trusset software/structural system. Trusset is a combined building system and agent-based software design tool. The building system is based on a differential space-truss designed for fabrication entirely with computer numerically controlled (CNC) linear cutting devices, such as laser cut¬ters or three-axis mills. The software component is a set of agent-based design tools for developing surfaces and envelopes formally suitable to be built using the space-truss structure. Developed in parallel, the soft¬ware and building components combine within the Trusset system to provide a seamless pipeline from design to fabrication and assembly. The story of the development of software components and structural system, leading to the Trusset, act as a means of discussing the larger issues framing the research: the potential pitfalls and benefits of design and fabrication integration via the computer.
keywords	Fabrication, Space-truss, Structure
series	ACADIA
email
last changed	2022/06/07 07:56

_id	406caadria2004
id	406caadria2004
authors	Hyun-Young Yeon, Uk Kim, Young-Kyou Soung
year	2004
title	A Structural Planning Modeler of Informal Shape Building Design
doi	https://doi.org/10.52842/conf.caadria.2004.647
source	CAADRIA 2004 [Proceedings of the 9th International Conference on Computer Aided Architectural Design Research in Asia / ISBN 89-7141-648-3] Seoul Korea 28-30 April 2004, pp. 647-654
summary	This study aims to implement a design tool that can help architects predict space configuration along with structural member location in complex shape buildings. Architects can use the tool to confirm spatial allocations and configurations as they apply structural members to building shape. The modeler is based on the object hierarchy of structural members in order to grab and to edit them conveniently.
series	CAADRIA
email
last changed	2022/06/07 07:50

_id	ddss2004_ra-263
id	ddss2004_ra-263
authors	Lindekens, J.
year	2004
title	REDUCTION MECHANISMS EXPLORED IN ARCHITECTURAL RE-DESIGN
source	Van Leeuwen, J.P. and H.J.P. Timmermans (eds.) Recent Advances in Design & Decision Support Systems in Architecture and Urban Planning, Dordrecht: Kluwer Academic Publishers, ISBN: 1-4020-2408-8, p. 263-278
summary	Observation of the design process of an architect shows that, while building up an argumentation for taking a design decision, different mechanisms of data transformation are used. The paper argues that this transformation is a key element in understanding architectural design processes. A theoretical description of these mechanisms forms the framework to discus a sequence of design decisions derived from a real-world design situation. After outlining how this can be implemented in a case-based design supporting tool, the paper concludes with a discussion of advantages and downsides the use of the tool might entail.
keywords	Architectural Re-Design, Design Process, Case-Based Design, Reduction Mechanisms
series	DDSS
type	normal paper
last changed	2004/07/03 23:20

_id	ddss2004_ra-193
id	ddss2004_ra-193
authors	Ohgai, A., Y. Gohnai, S. Ikaruga, M. Murakami, and K. Watanabe
year	2004
title	Japan Cellular Automata Modeling for Fire Spreading as a Tool to Aid CommunityBased Planning for Disaster Mitigation
source	Van Leeuwen, J.P. and H.J.P. Timmermans (eds.) Recent Advances in Design & Decision Support Systems in Architecture and Urban Planning, Dordrecht: Kluwer Academic Publishers, ISBN: 1-4020-2408-8, p. 193-209
summary	As a tool to support collaboration in community-based planning for disaster mitigation in Japanese old wooden built-up areas, we attempt to develop a fire spreading simulation model incorporated a fire fighting activity using Cellular Automata (CA). The proposed model can deal with the process of fire spreading in a building that traditional models can not represent. Whether or not fire can spread is based on a stochastic calculation process to reproduce uncertain fire spreading. The errors caused by the stochastic factor are analyzed by carrying out simulation two or more times under the same condition. Moreover, the reproductivity of the model is examined by comparing simulation results with actual fire records.
keywords	Community-Based Planning for Disaster Mitigation, Fire Spreading, Fire Fighting Activity, Cellular Automata Modeling, Planning Support Tool
series	DDSS
last changed	2004/07/03 22:13

_id	sigradi2004_216
id	sigradi2004_216
authors	Pablo C. Grazziotin; Benamy Turkienicz; Luciano Sclovsky; Carla M. D. S. Freitas
year	2004
title	Cityzoom - A tool for the visualization of the impact of urban regulations
source	SIGraDi 2004 - [Proceedings of the 8th Iberoamerican Congress of Digital Graphics] Porte Alegre - Brasil 10-12 november 2004
summary	Visualization has been used for many years as an important way of presenting architectural design and projects. However, beyond design, planning urban areas requires the analysis of different factors. Urban regulations are planning tools used to control and/or stimulate changes in the urban structure and to reproduce a certain level of quality of the urban milieu. Land area, built area, plot rate, average building height, and other important attributes can be easily obtained from the geometric objects in the city model or explicitly associated to them. This paper presents a system, CityZoom, which integrates several performance tools that allow the simulation of different attributes related to a planned or existing city. These attributes are shown in different ways either as tables of attribute values estimated from model evaluation, or 3D scenarios where the user can navigate and observe realistic shadows and daylighting estimation based on the concept of solar envelope.
series	SIGRADI
email
last changed	2016/03/10 09:57

_id	sigradi2008_166
id	sigradi2008_166
authors	Papanikolaou, Dimitris
year	2008
title	Digital Fabrication Production System Theory: Towards an Integrated Environment for Design and Production of Assemblies
source	SIGraDi 2008 - [Proceedings of the 12th Iberoamerican Congress of Digital Graphics] La Habana - Cuba 1-5 December 2008
summary	A Digital Fabrication Production System (DFPS) is a concept describing a set of processes, tools, and resources that will be able to produce an artifact according to a design, fast, cheap, and easy, independently of location. A DFPS project is a complex assembly of custom parts that is delivered by a network of fabrication and assembly processes. This network is called the value chain. The workflow concept of a DFPS is the following: begin design process with a custom geometric form; decompose it into constructible parts; send the part files for fabrication to various locations; transport all parts at the construction site at the right time; finally, assemble the final artifact. Conceptually it means that based on a well structured value chain we could build anything we want, at anyplace, at controllable cost and quality. The goals of a DFPS are the following: custom shapes, controllable lead time, controllable quality, controllable cost, easiness of fabrication, and easiness of assembly. Simply stated this means to build any form, anywhere, accurately, cheap, fast, and easy. Unfortunately, the reality with current Digital Fabrication (DF) projects is rather disappointing: They take more time than what was planned, they get more expensive than what was expected, they involve great risk and uncertainty, and finally they are too complex to plan, understand, and manage. Moreover, most of these problems are discovered during production when it is already late for correction. However, there is currently no systematic approach to evaluate difficulty of production of DF projects in Architecture. Most of current risk assessment methods are based on experience gathered from previous similar cases. But it is the premise of mass customization that projects can be radically different. Assembly incompatibilities are currently addressed by building physical mockups. But physical mockups cause a significant loss in both time and cost. All these problems suggest that an introduction of a DFPS for mass customization in architecture needs first an integrated theory of assembly and management control. Evaluating feasibility of a DF project has two main problems: first, how to evaluate assemblability of the design; second, how to evaluate performance of the value chain. Assemblability is a system’s structure problem, while performance is a system’s dynamics problem. Structure of systems has been studied in the field of Systems Engineering by Network Analysis methods such as the Design Structure Matrix (DSM) (Steward 1981), and the liaison graph (Whitney 2004), while dynamics of systems have been studied by System Dynamics (Forrester 1961). Can we define a formal method to evaluate the difficulty of production of an artifact if we know the artifact’s design and the production system’s structure? This paper formulates Attribute Process Methodology (APM); a method for assessing feasibility of a DFPS project that combines Network Analysis to evaluate assemblability of the design with System Dynamics to evaluate performance of the value chain.
keywords	Digital Fabrication, Production System, System Dynamics, Network Analysis, Assembly
series	SIGRADI
email
last changed	2016/03/10 09:57

_id	sigradi2004_310
id	sigradi2004_310
authors	Sharad Sharma; James A. Turner
year	2004
title	An object oriented approach to simulating agent-based behavior
source	SIGraDi 2004 - [Proceedings of the 8th Iberoamerican Congress of Digital Graphics] Porte Alegre - Brasil 10-12 november 2004
summary	In this paper, we present an object-oriented approach for simulating agent-based egress behavior. The tool can be used when planners or designers need to assess the implications of their design or planning decisions. The tool is a web-based application that is being developed using standard protocols and technologies such as HTTP, HTML, and Java. It also demonstrates the effect of new building designs by simulating human evacuation behavior and relates the behavior of people. The existing models to describe the behavior of crowds usually deal with macroscopic variables like the average speed or the flow. Our aim is to model crowds as a malleable, moving masses, hoping that a more refined simulation might be achieved by considering each avatars behavior.
keywords	Agent based simulation, Egress behavior
series	SIGRADI
email
last changed	2016/03/10 10:00

_id	acadia04_138
id	acadia04_138
authors	Surjan, Terry
year	2004
title	Appealing to the Masses, or Serious Play with Blocks
doi	https://doi.org/10.52842/conf.acadia.2004.138
source	Fabrication: Examining the Digital Practice of Architecture [Proceedings of the 23rd Annual Conference of the Association for Computer Aided Design in Architecture and the 2004 Conference of the AIA Technology in Architectural Practice Knowledge Community / ISBN 0-9696665-2-7] Cambridge (Ontario) 8-14 November, 2004, 138-149
summary	With a certain budget and limited access to a Computer-Numerically-Controlled mill, fourth year architecture students were charged with the problem of designing a full-scale architectural space that could be assembled and re-assembled in various contexts and configurations. As the constraints for the design studio, an economy of capital ($150 per student) and an economy of means were devel¬oped to create and produce over 600 units of a flexible architectural component, and many variations, into a building system that could be assembled to create multiple formal and spatial configurations push¬ing the concept of Mass-Customization towards MASS-Appeal. After choosing a unit-multiple method as the most practical parti for designing a space which can be disassembled and reassembled in multiple configurations and contexts, the students developed the economy of their block unit based on a maximization of blocks per sheet of 4'x 4' Medium Density Fiberboard. 4' x 4' was the maximum size that could be cut on the CNC mill at the school of architecture. The cut sheet was developed such that less than 3% of the board would go to waste. The exploration of assembly with these components produced multiple block types and multiple connection types that gave flexibility to the designed system.
keywords	STL Blocks
series	ACADIA
email
last changed	2022/06/07 07:56

_id	2004_586
id	2004_586
authors	Voigt, A., Martens, B. and Linzer, H.
year	2004
title	City Simulator - A Multi-dimensional VR-Simulation Environment
doi	https://doi.org/10.52842/conf.ecaade.2004.586
source	Architecture in the Network Society [22nd eCAADe Conference Proceedings / ISBN 0-9541183-2-4] Copenhagen (Denmark) 15-18 September 2004, pp. 586-592
summary	Whether in splendid rural isolation or in an urban area, settlement and building structures always are exposed to the public. Questions as to the future design of our vital space basically always concern the public and thus call for a great deal of discussion. Launching a well-balanced debate between all those involved in the planning and design process requires clear exemplification of urban-spatial visions by means of simulation. A simulation device - called “City Simulator” - suited to conveying the multitude of spatial relations within the urban configuration and for developing urban-spatial ideas would fulfil such expectations. The complexity of the information required in this context can be coped with effectively by means of computer-aided simulation techniques focusing on digital city models. Thus the implementation of a “City Simulator” may be regarded as a decisive tool for the purpose. As those involved in the process normally consider themselves absolute novices within the context of complex planning processes, the simulator will to some extent act as a “translation machine”. This paper is based on a project proposal which has been submitted by the authors aimed at the acquisition of a “City Simulator” at Vienna University of Technology in the near future.
keywords	3D City Models; Simulation; Virtual Reality; Visualization; Communication
series	eCAADe
email
last changed	2022/06/07 07:58

_id	ascaad2004_paper16
id	ascaad2004_paper16
authors	Hassan, R.; K. Jorgensen
year	2004
title	Computer Visualizations in Planning
source	eDesign in Architecture: ASCAAD's First International Conference on Computer Aided Architectural Design, 7-9 December 2004, KFUPM, Saudi Arabia
summary	A wide range of visualizations have been developed and implemented as tools for urban simulations and visual impact assessment. These include: plans, diagrams, elevations, perspective sketches, renderings, modified photographs (photo renderings and photomontages), slide projections, scale models, movies, videotapes and computer graphics. In the last decade, graphical computer applications have proven to be an increasingly supportive tool in visualization and manipulation of graphical material. This study presents the state of the art of computer visualization in planning. More specifically, the use of web-based computerized visualizations for landscape visual simulation, with the aim to develop a system of visualization techniques as an aid to communicating planning and design scenarios for historically important landscapes and urban places, with particular attention to the city of Nablus in Palestine. This has led to the evaluation of possibilities and potentials of computer use in this field, and to the definition of the visual problems and challenges of the city of Nablus. This study will argue what extra one can draw from computerized visualizations, what is likely to be its impact on future planning and design research, and what this visualization experience really means for historical important locations as in Nablus. The study demonstrates that computerized visualizations can be a powerful tool in representing a cityscape in three-dimensions from different angels. Visualizations will allow better understanding of the components of the city, its landscapes, city features and the process of change. In this way it may provide new and better platforms for public participation in planning.
series	ASCAAD
email
last changed	2007/04/08 19:47

_id	ascaad2004_paper15
id	ascaad2004_paper15
authors	Mallasi, Z.
year	2004
title	Identification and Visualisation of Construction Activities’ Workspace Conflicts Utilising 4D CAD/VR Tools
source	eDesign in Architecture: ASCAAD's First International Conference on Computer Aided Architectural Design, 7-9 December 2004, KFUPM, Saudi Arabia
summary	This work addresses the problem arising on all construction sites: the occurrence of workspace interference between construction activities. From a site space planning context, this problem can lead to an inevitable roadblock to the progress of the scheduled construction operations. In real situations, when the spatial congestions occur, they could reduce productivity of workers sharing the same workspace and may cause health and safety hazard issues. The aim of this paper is on presenting a computer-based method and developed tool to assist site managers in the assignment and identification of workspace conflicts. The author focuses on the concept of ‘visualising space competition’ between the construction activities. The concept is based on a unique representation of the dynamic behaviour of activity workspace in 3D space and time. An innovative computer-based tool dubbed PECASO (Patterns Execution and Critical Analysis of Site-space Organisation) has been developed. The emerging technique of 4D (3D + time) visualisation has been chosen to yield an interesting 4D space planning and visualisation tool. A multi-criteria function for measuring the severity of the workspace congestions is designed, embedding the spatial and schedule related criteria. The paper evaluates the PECASO approach in order to minimise the workspace congestions, using a real case study. The paper concludes that the PECASO approach reduces the number of competing workspaces and the conflicting volumes between occupied workspace, which in turn produces better assessment to the execution strategy for a given project schedule. The system proves to be a promising tool for 4D space planning; in that it introduces a new way of communicating the programme of work.
series	ASCAAD
email
last changed	2007/04/08 19:47

_id	ddss2004_ra-19
id	ddss2004_ra-19
authors	Akamine, A. and A. Nélson Rodrigues da Silva
year	2004
title	An Evaluation of Neural Spatial Interaction Models Based on a Practical Application
source	Van Leeuwen, J.P. and H.J.P. Timmermans (eds.) Recent Advances in Design & Decision Support Systems in Architecture and Urban Planning, Dordrecht: Kluwer Academic Publishers, ISBN: 1-4020-2408-8, p. 19-32
summary	One of the serious problems faced by the Brazilian municipalities is the scarcity of resources for building education infrastructure. This asks for an optimal allocation of the available resources that includes, among other things, a rational spatial arrangement of the supply points (i.e., schools) in order to increase the demand coverage (i.e., students). If it is possible to foresee the regions where the demand is going to be concentrated, it is then possible to plan the location of new facilities and to assess the impact on the future level of service of the entire system. Considering that one of the consequences of the location-allocation process is the distribution of trips from demand points to supply points throughout the city, therefore affecting the overall intraurban accessibility conditions to essential services such as education, there is a strong need of models that planners can rely on to predict the future trip distribution patterns. As a result, the objective of this work was to evaluate the performance of Artificial Neural Networks (ANN) when applied to spatial interaction models, the so-called Neural Spatial Interaction Models. This was done in a practical context, in contrast to the more theoretical works commonly found in literature. The practical application showed that the neural spatial interaction model had different performances when compared to the traditional gravity models. In one case the neural models outperformed the gravity models, while on the other case it was just the opposite. The explanation for this may be in the data or in the ANN model formulation, as discussed in the conclusions.
keywords	Artificial Neural Networks, Spatial Interaction Models, Education Infrastructure
series	DDSS
last changed	2004/07/03 22:13

_id	sigradi2004_333
id	sigradi2004_333
authors	Andrés S. Rodríguez
year	2004
title	Exploración de relaciones entre analogías y bocetos durante la generación de ideas en diseño industrial como elicitación de requerimientos para CAD [Exploration of Relations between Analogies and Sketches During the Generation of Ideas in Industrial Design for Eliciting CAD Requirements]
source	SIGraDi 2004 - [Proceedings of the 8th Iberoamerican Congress of Digital Graphics] Porte Alegre - Brasil 10-12 november 2004
summary	An exploration on the analogy-based idea generation process in industrial design is reported. In particular we try to identify relationships between the sketching process and the analogy building in order to elicit requirements for a supporting software. We use concurrent think aloud protocols to obtain experimental data and an extension of a proved content oriented schema to analyze them. Statistical analysis on segments containing .analogical chains. found relations between analogical and design actions that allow us to support the hypothesis that the sketch seems to be more useful for helping the analytical aspects of the analogical making (i.e. to code a situation in terms of higher order relations) than the synthetic ones (i.e. to identify an analogy source). Results were interpreted as software requirements for a Computer Aided Design Application.
keywords	Sketching, Analogy, CAD, Industrial design, Protocol analysis
series	SIGRADI
email
last changed	2016/03/10 09:47

_id	acadia04_186
id	acadia04_186
authors	Bell, Bradley
year	2004
title	Digital Tectonics: Structural Patterning of Surface Morphology
doi	https://doi.org/10.52842/conf.acadia.2004.186
source	Fabrication: Examining the Digital Practice of Architecture [Proceedings of the 23rd Annual Conference of the Association for Computer Aided Design in Architecture and the 2004 Conference of the AIA Technology in Architectural Practice Knowledge Community / ISBN 0-9696665-2-7] Cambridge (Ontario) 8-14 November, 2004, 186-201
summary	The computer in architectural design has shifted from its role as a merely representational device to that of a tool for instrumentalized simulation and fabrication. The desire to make buildings look like a rendering, or to produce photo-realistic images and walkthroughs has given way to an opening of the potentials of software to assist the designer with managing complex geometries, parametric organizational diagrams, structural analysis, and integrated building systems. Simulation has become the means by which virtual space becomes more than just a mirror of reality. It becomes the space within which different potential realities can be tested and evaluated before they are materially implemented. In architecture, information derived from material constraints to site conditions can be constantly fed into the computer models to provide an accurate update, which in turn introduces feedback into the overall design, and change can then be registered in the detail.
keywords	surface, patterns, structure, CAD/CAM, fabrication
series	ACADIA
email
last changed	2022/06/07 07:54

_id	ddss2004_ra-247
id	ddss2004_ra-247
authors	Bi, G. and B. Medjdoub
year	2004
title	Hybrid Approach to Solve Space Planning Problems in Building Services
source	Van Leeuwen, J.P. and H.J.P. Timmermans (eds.) Recent Advances in Design & Decision Support Systems in Architecture and Urban Planning, Dordrecht: Kluwer Academic Publishers, ISBN: 1-4020-2408-8, p. 247-261
summary	In this paper an object-based CAD programming is used to take advantage of standardization to handle the schematic design, sizing, layout for services in a building ceiling void. From the specification of the building 3D model, our software proceeds through different steps; from the determination of the standard number and size of fan coils to the generation of 3D solutions. In order to deal with more complex geometry and larger problems, we have used a hybrid approach: Case Based Reasoning (CBR) within Constraint Satisfaction Problem (CSP) approaches. In practice, engineers in building services use previous solutions and adapt them to new problems. CBR mirrors this practical approach and does help us to deal with increasingly complex geometry effectively, and meanwhile CSP has been used for layout adaptation. The results have shown that it is possible to define and implement standard solutions to produce designs comparable with current practice. The benchmarking exercise has underlined many advantages and made some suggestions for further development. This project is funded by The Engineering and Physical Sciences Research Council (EPSRC) in UK.
keywords	Case-Based Reasoning, Constraint Satisfaction Problem, Ceiling Voids Layout, Complex Geometry, Large Problem
series	DDSS
last changed	2004/07/03 22:13

_id	acadia11_138
id	acadia11_138
authors	Buell, Samantha; Shaban, Ryan; Corte, Daniel; Beorkrem, Christopher
year	2011
title	Zero-waste, Flat Pack Truss Work: An Investigation of Responsive Structuralism
doi	https://doi.org/10.52842/conf.acadia.2011.138
source	ACADIA 11: Integration through Computation [Proceedings of the 31st Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA)] [ISBN 978-1-6136-4595-6] Banff (Alberta) 13-16 October, 2011, pp. 138-143
summary	The direct and rapid connections between scripting, modeling and prototyping allow for investigations of computation in fabrication. The manipulation of planar materials with two-dimensional CNC cuts can easily create complex and varied forms, volumes, and surfaces. However, the bulk of research on folding using CNC fabrication tools is focused upon surfaces, self-supporting walls and shell structures, which do not integrate well into more conventional building construction models.This paper attempts to explain the potential for using folding methodologies to develop structural members through a design-build process. Conventional building practice consists of the assembly of off-the-shelf parts. Many times, the plinth, skeleton, and skin are independently designed and fabricated, integrating multiple industries. Using this method of construction as an operative status quo, this investigation focused on a single structural component: the truss. A truss is defined as: “A triangulated arrangement of structural members that reduces nonaxial external forces to a set of axial forces in its members.” (Allen and Iano 2004)Using folding methodologies and sheet steel to create a truss, this design investigation employed a recyclable and prolific building material to redefine the fabrication of a conventional structural member. The potential for using digital design and two-dimensional CNC fabrication tools in the design of a foldable truss from sheet steel is viable in the creation of a flat-packed, minimal waste structural member that can adapt to a variety of aesthetic and structural conditions. Applying new methods to a component of the conventional ‘kit of parts’ allowed for a novel investigation that recombines zero waste goals, flat-packing potential, structural expression and computational processes.
series	ACADIA
type	normal paper
email
last changed	2022/06/07 07:54

_id	ddss2008-33
id	ddss2008-33
authors	Charlton, James A.; Bob Giddings and Margaret Horne
year	2008
title	A survey of computer software for the urban designprocess
source	H.J.P. Timmermans, B. de Vries (eds.) 2008, Design & Decision Support Systems in Architecture and Urban Planning, ISBN 978-90-6814-173-3, University of Technology Eindhoven, published on CD
summary	Urban design is concerned with the shape, the surface and the physical arrangement of all kinds of urban elements, the basic components that make up the built environment, at the level of buildings, spaces and human activities. It is also concerned with the non-visual aspects of the environment, such as noise, wind and temperature and humidity. The city square is a particular urban element which can take many forms and its geometrical relationships such as maximum dimensions, ratio of width to length and building height to length have been analysed for centuries (Alberti 1475), (Vitruvius 1550), (Sitte 1889), (Corbett 2004). Within the current urban design process there are increasing examples of three dimensional computer representations which allow the user to experience a visual sense of the geometry of city squares in an urban landscape. Computer-aided design and Virtual Reality technologies have recently contributed to this visual assessment, but there have been limited attempts at 3D computer representations which allow the user to experience a greater sense of the urban space. This paper will describe a survey of computer tools which could support a more holistic approach to urban design and which could be used to simulate a number of urban texture and urban quality aspects. It will provide a systematic overview of currently available software that could support the simulation of building density, height, colour and style as well as conditions relating to noise, shading, heat, natural and artificial light. It will describe a methodology for the selection and filtering of appropriate computer applications and offer an initial evaluation of these tools for the analysis and representation of the three-dimensional geometry, urban texture and urban quality of city centre spaces. The paper is structured to include an introduction to the design criteria relating to city centre spaces which underpins this research. Next the systematic review of computer software will be described, and selected tools will undergo initial evaluation. Finally conclusions will be drawn and areas for future research identified.
keywords	Urban design, Software identification, 3D modelling, Pedestrian modelling, Wind modelling, Noise mapping, Thermal comfort, VR Engine
series	DDSS
last changed	2008/09/01 17:06

_id	0131
id	0131
authors	Chiarella, Mauro
year	2004
title	GEOMETRY AND ARCHITECTURE: NURBS, DESIGN AND CONSTRUCTION
source	Proceedings of the Fourth International Conference of Mathematics & Design, Special Edition of the Journal of Mathematics & Design, Volume 4, No.1, pp. 135-139.
summary	Geometry regarded as a tool for understanding is perhaps the part of Mathematics which is the most intuitive, concrete and linked to reality. From its roots as a tool to describe and measure shapes, geometry as ‘the space science’ , has grown towards a theory of ideas and methods by means of which it is possible to build and study idealised models, not only from the physical world but also from the real world. In graphic architecture thought, geometry usually appears as an instrumental support for project speculation. Geometric procedures are presented as representational resources for the graphic testing of reflection and for the exposition of ideas in order to build a logical order as regards representation and formal prefiguration. The fast rise of computing in the last decades has made it possible for architects to work massively and in a graphic and intuitive way with mathematical representations of tridimensional geometry, such as the NURBS . These organic surfaces of free shapes defined by vectorial curves have allowed access to a rapid generation of complex shapes with a minumum amount of data and of specific knowledge. The great development of modelling achieved by the digital media and the limitations in the technical and building areas and in the existence of materials which are coherent with the resultant shapes reveal a considerable distance between the systems of ideation and simulation characteristic of the computing era and the analogous systems of production inherited from the slow industrial development. This distance has been shortened by CAD/CAM systems, which are, however, not very accessible to the architectural field. If we incorporate to the development of these divergent media the limitations which are distinctive of the material resources and procedures of the existent local technology, the aforementioned distance seems even greater. Assuming the metaphor of living at the threshold of two ages (industrial-computing, analogical-digital, material-virtual) and the challenge of the new conceptual and operational tools in our field, we work in the mixture, with no exclusions or substitutions, proposing (by means of the development of informational complements) some alternatives of work to approach the issue under discussion from the Architecture Workshop.
keywords	Geometry, Design, NURBS, Unfolding, Pedagogy
series	other
type	normal paper
email
last changed	2005/04/07 12:51

For more results click below: