Cumincad : CUMINCAD Papers : Search Results

CumInCAD is a Cumulative Index about publications in Computer Aided Architectural Design
supported by the sibling associations ACADIA, CAADRIA, eCAADe, SIGraDi, ASCAAD and CAAD futures

PDF papers
References

Hits 1 to 20 of 562

Reformat results as: short short into frame detailed detailed into frame

_id	ascaad2004_paper11
id	ascaad2004_paper11
authors	Abdelfattah, Hesham Khairy and Ali A. Raouf
year	2004
title	No More Fear or Doubt: Electronic Architecture in Architectural Education
source	eDesign in Architecture: ASCAAD's First International Conference on Computer Aided Architectural Design, 7-9 December 2004, KFUPM, Saudi Arabia
summary	Operating electronic and Internet worked tools for Architectural education is an important, and merely a prerequisite step toward creating powerful tele-collabortion and tele-research in our Architectural studios. The design studio, as physical place and pedagogical method, is the core of architectural education. The Carnegie Endowment report on architectural education, published in 1996, identified a comparably central role for studios in schools today. Advances in CAD and visualization, combined with technologies to communicate images, data, and “live” action, now enable virtual dimensions of studio experience. Students no longer need to gather at the same time and place to tackle the same design problem. Critics can comment over the network or by e-mail, and distinguished jurors can make virtual visits without being in the same room as the pin-up—if there is a pin-up (or a room). Virtual design studios (VDS) have the potential to support collaboration over competition, diversify student experiences, and redistribute the intellectual resources of architectural education across geographic and socioeconomic divisions. The challenge is to predict whether VDS will isolate students from a sense of place and materiality, or if it will provide future architects the tools to reconcile communication environments and physical space.
series	ASCAAD
email
last changed	2007/04/08 19:47

_id	2004_580
id	2004_580
authors	Dokonal, W., Martens, B. and Plösch, R.
year	2004
title	Creating and Using Virtual Cities
doi	https://doi.org/10.52842/conf.ecaade.2004.580
source	Architecture in the Network Society [22nd eCAADe Conference Proceedings / ISBN 0-9541183-2-4] Copenhagen (Denmark) 15-18 September 2004, pp. 580-585
summary	City modelling is a topic which has been on the agenda for a long time and two main approaches from different angles in this field can be identified. GIS experts have attempted over the years (in collaboration with programmers) to build information systems for cities by means of combining graphical information with related metadata. Architects also started to get involved in this field. However, they were mainly interested in the spatial aspects of a city model and created their own “city models” for different purposes. Today crucial questions concerning the creation itself are resolved, the vision of implementation into daily work becomes more and more important. In other words: “what to do” with the accumulated data. This paper intends to identify the core role of the architect in the field of 3D-city modelling.
keywords	Urban Modelling, 3D Modelling, GIS, Virtual Worlds, City Model
series	eCAADe
email
last changed	2022/06/07 07:55

_id	ddss2004_ra-85
id	ddss2004_ra-85
authors	Shen, Z.J. and M. Kawakami
year	2004
title	Visualization of Usable Building Space According to Planning Permission Ordinances for Public Participation in District Plan in Japan
source	Van Leeuwen, J.P. and H.J.P. Timmermans (eds.) Recent Advances in Design & DecisionSupport Systems in Architecture and Urban Planning, Dordrecht: Kluwer Academic Publishers, ISBN: 1-4020-2408-8, p. 85-98
summary	The district plan in Japan is designed and implemented through public participation, which is based on the zone restrictions of land use system. The usable space of a building can be generated according to the zone restrictions implemented in a district plan, which include the planning controls of high altitude, oblique line and so on. Residents can choose control items as their preference in order to control the urban physical environment of the district. In this paper, we discuss how to generate the virtual world according to the data set of GIS including planning control items and how it can work for net participation. In the future, we would like to conduct an Internet social experiment with the cooperation of a city government and residents in order to support the district plan in a local city.
keywords	WEBGIS, JAVA3d, Planning restrictions, Public participation
series	DDSS
last changed	2004/07/03 22:13

_id	2004_082
id	2004_082
authors	Rona, Cagri and M. Saleh Uddin
year	2004
title	Surround Digital Audio in Architectural Animation and VR Environment
doi	https://doi.org/10.52842/conf.ecaade.2004.082
source	Architecture in the Network Society [22nd eCAADe Conference Proceedings / ISBN 0-9541183-2-4] Copenhagen (Denmark) 15-18 September 2004, pp. 82-88
summary	To stimulate all five senses through a realistic representation, audio plays a significant role. Architectural representation in digital media primarily falls in the area of visualization. Recent developments in simulation of 3d animation, lighting effect, material options and texture quality demonstrate that technology has come to a satisfactory level for representing realistic environments. But, at the same time, designers may not have paid due attention in regards to simulation of quality audio in architectural representation, particularly in 3D animation. “Surround Sound” or technically, the Dolby Digital and DTS technology has been used for entertainment purposes in film and movie production for a long time. As realistic materials and lighting increases the value of reality, sounds and sound effects too can add value to represented virtual reality architectural environments. Surround Sound technology simply delivers different signals from a 360-degree range. The reason beneath this is to break the sense of looking towards a single direction. Ideally, the audio should come from the direction of the visuals on the scene. Synchronization of both visual and Dolby Digital audio can enhance the experiential quality of an audio-visual representation. At the same time, it can break the notion of audio coming from a single direction. This paper suggests and demonstrates the technique of combining surround sound in digital 3D architectural animation for the purpose of enhancing its visual and sensory quality.
keywords	Architecture, Animations, 3D Surround Audio
series	eCAADe
last changed	2022/06/07 07:56

_id	sigradi2004_307
id	sigradi2004_307
authors	Eduardo Wagner Rogério
year	2004
title	Utilização dos dados do programa de saúde da família como subsídio para a construção de um sistema geográfico de informações [The Use of Data from the "Family Health Program" to support a GIS Construction]
source	SIGraDi 2004 - [Proceedings of the 8th Iberoamerican Congress of Digital Graphics] Porte Alegre - Brasil 10-12 november 2004
summary	The objective of this paper is to develop a methodology in integrated municipal planning in Family Health, using tools such as the Geographic Information System and programs already implemented in towns, to provide the methodology of sustainable and participative urbanization derived from new federal, state and municipal legislations. By the end of the study it was possible to build a data model spacial oriented, located in Tubarão, Santa Catarina, at Dehon and Morrotes suburbs, achieving about 6 thousand people. The obtained results justify the implementaion of a Geographic Information System in health, in order to manage the daily collected data in Family Health Program, optimizing and helping in the application of public politics. Key words: Family Health, Geographic Information System, Public Politics, Daily Collection.
series	SIGRADI
email
last changed	2016/03/10 09:51

_id	ddss2004_ra-99
id	ddss2004_ra-99
authors	Göttig, R., J. Newton, and S. Kaufmann
year	2004
title	A COMPARISON OF 3D VISUALIZATION TECHNOLOGIES AND THEIR USER INTERFACES WITH DATA SPECIFIC TO ARCHITECTURE
source	Van Leeuwen, J.P. and H.J.P. Timmermans (eds.) Recent Advances in Design & Decision Support Systems in Architecture and Urban Planning, Dordrecht: Kluwer Academic Publishers, ISBN: 1-4020-2408-8, p. 99-111
summary	Contemporary advanced virtual reality systems use different stereoscopic 3D visualization technologies. In this study, VR systems from one projection wall up to VR systems with six projection walls have been evaluated. Besides the optical properties tested with architectural 3D models, the user interfaces have been analyzed with reference to exact and intuitive control abilities. Additionally, the workflow of an early architectural design process with CAAD generated 3D models and VR visualization techniques was analyzed. It turns out that current VR systems exhibit shortcomings in visual and spatial representations, as well as tools for an early design process.
keywords	3D-Systems, Virtual Reality, Powerwall, Holobench, HMD, CAVE, User Interfaces, Visual Display Qualities, Design Process
series	DDSS
type	normal paper
last changed	2004/07/03 23:02

_id	2004_374
id	2004_374
authors	Hannibal, C., Brown, A. and Knight, M.
year	2004
title	How Useful is the Digital Sketch?
doi	https://doi.org/10.52842/conf.ecaade.2004.374
source	Architecture in the Network Society [22nd eCAADe Conference Proceedings / ISBN 0-9541183-2-4] Copenhagen (Denmark) 15-18 September 2004, pp. 374-379
summary	This paper presents an experimental approach that examines human response to three virtual representations (sketchy line, non-photorealistic and near-photorealistic) of three similar architectural schemes (in terms of concept, context and scale) within a non-immersive large-screen projected virtual environment. Participant response is recorded utilising the factors of detail, spatial understanding, character and presence. By comparing data it should be possible to draw conclusions about aspects particular to non-immersive Virtual Reality (VR) activity as a means of architectural representation.
keywords	Non-Immersive Virtual Environments, Digital Sketching, Non-Photorealism
series	eCAADe
last changed	2022/06/07 07:50

_id	504caadria2004
id	504caadria2004
authors	Kia-Tzu Lu
year	2004
title	Navigating 3D Information Space with 6 Degree of Freedom Devices
doi	https://doi.org/10.52842/conf.caadria.2004.777
source	CAADRIA 2004 [Proceedings of the 9th International Conference on Computer Aided Architectural Design Research in Asia / ISBN 89-7141-648-3] Seoul Korea 28-30 April 2004, pp. 777-786
summary	The purpose of this research is to identify how to intuitively operate 6 DOF Input Devices for interactive data storage in 3D virtual environments through the virtual Internet world generated by Image, Text, Animation, Model, under the condition that the role of the computer is to simulate the way people sense the real space, so users may instinctively utilize this simple device to explore the possibility of data recurrence and reorganization, and designers may receive timely inspiration in the process of architectural design.
series	CAADRIA
email
last changed	2022/06/07 07:52

_id	ddss2008-08
id	ddss2008-08
authors	Koshak, Nabeel A.; Abdullah Fouda
year	2008
title	Analyzing Pedestrian Movement in Mataf Using GPSand GIS to Support Space Redesign
source	H.J.P. Timmermans, B. de Vries (eds.) 2008, Design & Decision Support Systems in Architecture and Urban Planning, ISBN 978-90-6814-173-3, University of Technology Eindhoven, published on CD
summary	Evaluating the use of architectural and urban spaces is an important issue for architects and urban designers who wish to enhance space usability. Space usability is crucial in crowded spaces such as Mataf areas. Millions of people come to the city of Makkah, Saudi Arabia every year to perform Hajj (Islamic Pilgrimage) and Umrah. A cornerstone of Hajj and Umrah spirituals is to perform Tawaf, which is the circumambulation of the Ka'bah in the center of the Holy Mosque in Makkah. The areas of performing Tawaf (called Mataf) become very crowded during Hajj and the last ten days of Ramadan. This paper demonstrates how we utilized Global Positioning Systems (GPS) and Geographic Information Systems (GIS) to analyze pedestrian movement while performing Tawaf. During the Hajj of 1424 H (2004 in the Georgian Calendar), several GPS devices were used to collect pedestrian movement coordinates at specific time intervals. Computer software for tracking analysis is used to visualize and analyze the pattern of pedestrian movement in Tawaf. The software allows users to view temporal data, which can be set up with past time windows for historical data analysis. The findings of this research show levels of service and flow rates throughout different zones and times of Mataf. They indicate the most critical zones and times for Tawaf during Hajj. They also visually demonstrate the track pattern of pedestrian movement at different locations in the Tawaf area. The paper concludes with some redesign recommendations to remove obstacles and facilitate pedestrian movement in Tawaf. The approach described in this paper can be implemented in architectural and urban design space modifications to improve pedestrian movement in open spaces.
keywords	Pedestrian movement analysis, GPS, GIS, Hajj, Makkah, Tawaf
series	DDSS
last changed	2008/09/01 17:06

_id	2004_136
id	2004_136
authors	Mullins, Michael and Zupancic Strojan, Tadeja
year	2004
title	Depth Perception in CAVE and Panorama
doi	https://doi.org/10.52842/conf.ecaade.2004.136
source	Architecture in the Network Society [22nd eCAADe Conference Proceedings / ISBN 0-9541183-2-4] Copenhagen (Denmark) 15-18 September 2004, pp. 136-141
summary	This study compares aspects of spatial perception in a physical environment and its virtual representations in a CAVE and Panorama, derived from recent research. To measure accuracy of spatial perception, participants in an experiment were asked to look at identical objects in the three environments and then locate them and identify their shape on scaled drawings. Results are presented together with statistical analysis. In a discussion of the results, the paper addresses the two hypothetical assertions – that depth perception in physical reality and its virtual representations in CAVE and Panorama are quantifiably different, and that differences are attributable to prior contextual experience of the viewer. The role of prior or tacit knowledge in these environments is established from the empirical data. It is concluded that the CAVE offers a higher potential for spatial experience and learning than the Panorama. The results also suggests that knowledge gained in physical contexts is more readily transferred to its virtual simulation, while that gained in virtual experience is not reliably transferred to its equivalent physical context. The paper discusses implications for spatial ability, learning and training in virtual environments; in architectural education; and participatory design processes, in which the dialogue between real and imagined space may take place in virtual reality techniques.
keywords	Virtual Reality; Perception; Spatial Ability; Learning; Virtual Context
series	eCAADe
email
last changed	2022/06/07 07:59

_id	ecaade2015_161
id	ecaade2015_161
authors	Papasarantou, Chrissa; Kalaouzis, Giorgos, Pentazou, Ioulia and Bourdakis, Vassilis
year	2015
title	A Spatio-Temporal 3D Representation of a Historic Dataset
doi	https://doi.org/10.52842/conf.ecaade.2015.1.701
source	Martens, B, Wurzer, G, Grasl T, Lorenz, WE and Schaffranek, R (eds.), Real Time - Proceedings of the 33rd eCAADe Conference - Volume 1, Vienna University of Technology, Vienna, Austria, 16-18 September 2015, pp. 701-708
summary	Previous research (Bourdakis et al, 2012; Papasarantou et al, 2013) dealt with the problem of creating information visualisation systems capable of combining historical data of MUCIV's database and developing strategies that embed the non-spatial data in spatial models. The database was primarily designed as an experimental flexible spatio-temporal configuration of dynamic visual structures generating a variety of narrations through interaction.The attempt of producing a legible configuration driven by a number of criteria, led to the proposition of two different arrangements, namely the linear and radial array. The aim of this paper is to present the next step on the visualization after redefining both the way that thematic axes and data are visualized and arranged/scattered. Alternate configurations are investigated, based also on theoretical analysis on the conceptualization and perception of information visualization systems (Card et al 1999, Ware, 2004).
wos	WOS:000372317300076
series	eCAADe
email
more	https://mh-engage.ltcc.tuwien.ac.at/engage/ui/watch.html?id=74178dba-702a-11e5-aa5b-67bfe1e6502f
last changed	2022/06/07 08:00

_id	sigradi2004_329
id	sigradi2004_329
authors	Ravi S. Srinivasan; Ali M. Malkawi
year	2004
title	The use of learning algorithms for real-time immersive data visualization in buildings
source	SIGraDi 2004 - [Proceedings of the 8th Iberoamerican Congress of Digital Graphics] Porte Alegre - Brasil 10-12 november 2004
summary	Computational Fluid Dynamic (CFD) simulations are used to predict indoor thermal environments and assess their response to specific internal/external conditions. Although computing power has increased exponentially in the past decade, CFD simulations are time consuming and their prediction results cannot be used for real-time immersive visualization in buildings. A method that can bypass the time consuming simulations and generate .acceptable. results will allow such visualization to be constructed. This paper discusses a project that utilizes Artificial Neural Network (ANN) as a learning algorithm to predict post-processed CFD data to ensure rapid data visualization. The technique has been integrated with an immersive Augmented Reality (AR) system to visualize CFD results in buildings. ANN was also evaluated against a linear regression model. Both models were tested and validated with datasets to determine their degree of accuracy. Initial tests, conducted to evaluate the user.s experience of the system, indicated satisfactory results.
series	SIGRADI
email
last changed	2016/03/10 09:58

_id	ddss2004_ra-325
id	ddss2004_ra-325
authors	Rodrigues, D.S., L.C.L. Souza, and J.F.G. Mendes
year	2004
title	Enhancing 3DSkyView Extension Performance
source	Van Leeuwen, J.P. and H.J.P. Timmermans (eds.) Recent Advances in Design & Decision Support Systems in Architecture and Urban Planning, Dordrecht: Kluwer Academic Publishers, ISBN: 1-4020-24088, p. 325-340
summary	This paper presents a second version of the 3DSkyView extension. The purpose of that extension was to implement a calculation algorithm for assessment and visualization of sky view factors (SVF) by means of tools available in a Geographical Information System (GIS). The sky view factor is a thermal and geometric parameter pointed out in the specialized literature as one of the main causes of urban heat islands. A 3D-GIS is a powerful tool for reaching the goal of this research because it allows the storage, treatment and analysis of tri-dimensional urban data, in addition to a high level of flexibility for incorporating calculation algorithms. The objective in the 3DSkyView extension is to optimize the determination of that factor, not only reducing its demanding calculation and graphical representation time, but also generating a simplified tool for replacing expensive photographic equipment usually applied on this matter. Enhancing functions of ArcView GIS 3.2, the first version of that extension showed a very good performance allowing the automatic delineation and determination of SVF. That performance was although limited to a single observer point. The simulation of SVF for several view points in urban canyons was only possible by applying the extension as many times as the number of observers considered. Therefore, this second version was now developed in order to allow simultaneous determination of SVF for many view points. In addition, the 3DSkyView new interface is more flexible, in a way that the user may choose the kind of output wanted (graphical and/or tabular). With this new feature it is then easier to create a continuous SVF map for an entire area.
keywords	Sky View Factor, Urban Geometry, GIS Extension, Urban Heat Island
series	DDSS
last changed	2004/07/03 22:13

_id	cf2011_p018
id	cf2011_p018
authors	Sokmenoglu, Ahu; Cagdas Gulen, Sariyildiz Sevil
year	2011
title	A Multi-dimensional Exploration of Urban Attributes by Data Mining
source	Computer Aided Architectural Design Futures 2011 [Proceedings of the 14th International Conference on Computer Aided Architectural Design Futures / ISBN 9782874561429] Liege (Belgium) 4-8 July 2011, pp. 333-350.
summary	The paper which is proposed here will introduce an ongoing research project aiming to research data mining as a methodology of knowledge discovery in urban feature analysis. To address the increasing multi-dimensional and relational complexity of urban environments requires a multidisciplinary approach to urban analysis. This research is an attempt to establish a link between knowledge discovery methodologies and automated urban feature analysis. Therefore, in the scope of this research we apply data mining methodologies for urban analysis. Data mining is defined as to extract important patterns and trends from raw data (Witten and Frank, 2005). When applied to discover relationships between urban attributes, data mining can constitute a methodology for the analysis of multi-dimensional relational complexity of urban environments (Gil, Montenegro, Beirao and Duarte, 2009) The theoretical motivation of the research is derived by the lack of explanatory urban knowledge which is an issue since 1970‚Äôs in the area of urban research. This situation is mostly associated with deductive methods of analysis. The analysis of urban system from the perspective of few interrelated factors, without considering the multi-dimensionality of the system in a deductive fashion was not been explanatory enough. (Jacobs, 1961, Lefebvre, 1970 Harvey, 1973) To address the multi-dimensional and relational complexity of urban environments requires the consideration of diverse spatial, social, economic, cultural, morphological, environmental, political etc. features of urban entities. The main claim is that, in urban analysis, there is a need to advance from traditional one dimensional (Marshall, 2004) description and classification of urban forms (e.g. Land-use maps, Density maps) to the consideration of the simultaneous multi-dimensionality of urban systems. For this purpose, this research proposes a methodology consisting of the application of data mining as a knowledge discovery method into a GIS based conceptual urban database built out of official real data of Beyoglu. Generally, the proposed methodology is a framework for representing and analyzing urban entities represented as objects with properties (attributes). It concerns the formulation of an urban entity‚Äôs database based on both available and non-available (constructed from available data) data, and then data mining of spatial and non-spatial attributes of the urban entities. Location or position is the primary reference basis for the data that is describing urban entities. Urban entities are; building floors, buildings, building blocks, streets, geographically defined districts and neighborhoods etc. Urban attributes are district properties of locations (such as land-use, land value, slope, view and so forth) that change from one location to another. Every basic urban entity is unique in terms of its attributes. All the available qualitative and quantitative attributes that is relavant (in the mind of the analyst) and appropriate for encoding, can be coded inside the computer representation of the basic urban entity. Our methodology is applied by using the real and official, the most complex, complete and up-to-dataset of Beyoglu (a historical neighborhood of Istanbul) that is provided by the Istanbul Metropolitan Municipality (IBB). Basically, in our research, data mining in the context of urban data is introduced as a computer based, data-driven, context-specific approach for supporting analysis of urban systems without relying on any existing theories. Data mining in the context of urban data; ‚Ä¢ Can help in the design process by providing site-specific insight through deeper understanding of urban data. ‚Ä¢ Can produce results that can assist architects and urban planners at design, policy and strategy levels. ‚Ä¢ Can constitute a robust scientific base for rule definition in urban simulation applications such as urban growth prediction systems, land-use simulation models etc. In the paper, firstly we will present the framework of our research with an emphasis on its theoretical background. Afterwards we will introduce our methodology in detail and finally we will present some of important results of data mining analysis processed in Rapid Miner open-source software. Specifically, our research define a general framework for knowledge discovery in urban feature analysis and enable the usage of GIS and data mining as complementary applications in urban feature analysis. Acknowledgments I would like to thank to Nuffic, the Netherlands Organization for International Cooperation in Higher Education, for funding of this research. I would like to thank Ceyhun Burak Akgul for his support in Data Mining and to H. Serdar Kaya for his support in GIS.
keywords	urban feature analysis, data mining, urban database, urban complexity, GIS
series	CAAD Futures
email
last changed	2012/02/11 19:21

_id	sigradi2004_175
id	sigradi2004_175
authors	Diana Rodríguez Barros
year	2004
title	Modelos urbanos virtuales y lecturas hipermediales [Virtual Urban Models and Hypermedia Readings]
source	SIGraDi 2004 - [Proceedings of the 8th Iberoamerican Congress of Digital Graphics] Porte Alegre - Brasil 10-12 november 2004
summary	The urban virtual models are complex environments where interactive modelization and visualization systems have developed high advances, making possible they applications in many different purposes, by expert and non-expert users. Is interesting, in hypermedial reading, to recognise and to evaluate the advantages and obstacles to examine a 2D-3D-4D-5D model. In that direction is presented an exploratory study of preexperimental design, in which is investigated the impacts and influences in non-expert users, that the presence and use of interactive strategies of navigation, selection and manipulation, produces in the results and affects the attitudes with regard to the possibilities of understanding and integration of information and in the confusion and cognitive overflow. The objective is to contribute in the definition and systematization of methodologys and design patterns about interfaces and interactions in three-dimensional hypermedia, from theoretical, operating and pedagogical approach.
keywords	Hypermedial / virtual model /interaction/ interface / exploratory study
series	SIGRADI
email
last changed	2016/03/10 09:50

_id	2004_435
id	2004_435
authors	Jemtrud, Michael
year	2004
title	Between Mediation and Making CIMSp: A Technoètic Modus Operandi
doi	https://doi.org/10.52842/conf.ecaade.2004.435
source	Architecture in the Network Society [22nd eCAADe Conference Proceedings / ISBN 0-9541183-2-4] Copenhagen (Denmark) 15-18 September 2004, pp. 435-442
summary	The following paper describes an ongoing research project whose goal is to define a scalable, hybrid production and deployment protocol (CIMSp) for the creation of virtual environments (VE). Ultimately, the aim is to establish a creative workflow and infrastructure that embodies architectural and urban design activity as practiced by the research unit. The objective of the present paper is to schematically outline the current state of the research and its practical and theoretical context for further development. A theoretical position will be stated which assumes that the content, tool, epistemological, and speculative realms are consubstantial (technoèsis). The practical endeavour is to create the informational and embodied temporal--spatial condition of possibility for the imaginative production of cultural artifacts. It must accommodate varying individual and collaborative forms and styles of making and no presumption of a self-enclosed and referential system is made. A critical position is particularly compelling when this production is immersed in technological modalities of making where information and embodiment are inextricably intertwined. CIMSp is based on the workflow from acquisition and creation to output and storage. The work environment is comprised of a select set of software applications and visualization technologies. Secondly, an XML-based content and information management system is under construction to ensure project quality control, rigorous documentation practices, and bi-directional knowledge feedback procedures to enable an effective and resource-full workflow. Lastly, scalability of output modalities for use in the design process and for final presentation from WWW deployment to a high-resolution collaborative work environment (CWE) is being developed. The protocol is a multiuser mode of creation and production that aims to transform the technologies and their interrelation, thus dramatically impacting the creative process and intended content. It is a digital production workflow that embodies intensive visualization criteria demanded by the end users. The theoretical and practical intention of CIMSp is to provisionally structure the collaborative creative process and enable a choreographed movement between the realms of the technologically mediated and made in the pursuit of significant digital content creation.
series	eCAADe
last changed	2022/06/07 07:52

_id	2004_480
id	2004_480
authors	Mark, Earl
year	2004
title	Inter-related Scaled Models of the Built and Natural Environment: Merging CAD with Satellite Image Viewing
doi	https://doi.org/10.52842/conf.ecaade.2004.480
source	Architecture in the Network Society [22nd eCAADe Conference Proceedings / ISBN 0-9541183-2-4] Copenhagen (Denmark) 15-18 September 2004, pp. 480-488
summary	By inter-relating CAD and satellite image earth-viewing tools at building specific, city-wide and larger global scales, a wider framework of observation yields insight into the connectedness between built environments and tracking influences between them. The technologies for visualization and analysis at distinct scales are moving towards greater integration. This project demonstrates integration through three case studies, each at a different scale of application, and considers performance issues and implications for more general use. More specifically, CAD, GIS and now Satellite Image Based Earth Viewing systems all have found separate application within Architecture, Urban Planning and Strategic Regional Analysis This paper reports on an effort to test the tighter coupling of these systems on three projects, each at a different scale: (1) urban and regional scale, (2) continental scale, and (3) hemispheric analysis scale.
keywords	CAD, Earth Viewer, Digital Terrain Model, Comprehensive Plan, Architectural Review Board, Computer Animation
series	eCAADe
email
last changed	2022/06/07 07:59

_id	508caadria2004
id	508caadria2004
authors	Tomas V. Dorta
year	2004
title	Drafted Virtual Reality - A New Paradigm to Design with Computers
doi	https://doi.org/10.52842/conf.caadria.2004.829
source	CAADRIA 2004 [Proceedings of the 9th International Conference on Computer Aided Architectural Design Research in Asia / ISBN 89-7141-648-3] Seoul Korea 28-30 April 2004, pp. 829-844
summary	This paper proposes a new technique for designing spaces, called Drafted Virtual Reality (DVR), to be used in interior, architectural or industrial design. It proposes the construction of virtual panoramic environments through the QuickTime VR (QTVR) Panorama platform (Apple), starting from sketches made by hand using traditional pen-on-paper techniques. To construct these drawings, the designer uses the computer to build a graphic panoramic template. Using this technique, the designer takes advantage of both approaches, the capacities and possibilities of the computer using VR (3D environments, interaction and real-time), and those of free-hand sketches (abstraction, inaccuracy and ambiguity). These last elements are essential for the first steps of the design process in contrast to the conventional techniques of 3D modeling interacting with mouse and menus. In the development of design computer solutions, it is important to know the user well. However, most researchers propose systems very different than how designers actually work. The DVR doesn’t try to simulate analog tools by computers (digital pens), but takes advantage of hand drawn sketches created using analog techniques that are already known by designers and improved by VR visualization. A review of the implication of this technique on the design process. Not only is the technique fast and easy to learn, the results show that the designer can express their individuality and the idiosyncrasies of their personal sketches; important elements hard to achieve with conventional 3D modeling techniques. Finally, this technique can be perceived as a new paradigm in the way we work with computers in design. The limitations of interfaces and usage of current technology are seen when the designer outputs information from the system to process using other analog techniques. The proposed solution marries the existing competencies and techniques of the designer with the advantages of the computer processing. The quality of the virtual experience of this technique is consistent with current designer’s intentions within the traditional design process.
series	CAADRIA
email
last changed	2022/06/07 07:58

_id	sigradi2004_057
id	sigradi2004_057
authors	Themis Fagundes; Eliane Schlemmer; Clarice Maraschin
year	2004
title	Cidades virtuais: projetos de aprendizagem em arquitetura e urbanismo [Virtual Cities: Architecture and Urbanism Learning Projects]
source	SIGraDi 2004 - [Proceedings of the 8th Iberoamerican Congress of Digital Graphics] Porte Alegre - Brasil 10-12 november 2004
summary	This paper discuss partial findings concerning academic research on Virtual Cities and Virtual Learning Environments, applied to the learning process in Architecture and Urbanism. We approach the paradigmatic shift on the conception of space and time, related to Informational Technology in the global context (WWW). This implies changes in the notion of city, space and place within the network society, which are raw material for architects. We use case study methodology to build partial digital models of the city of Porto Alegre, Brazil, based on basic 3D modelling and GIS technology. They composed computer places that are our digital base for the future development of virtual cities. They are operated as learning objects by the community of students and teachers, within Virtual Learning Environments (AVA). We argue that this process might enhance the development of autonomy, solidarity and cooperation, which are relevant cognitive abilities to the profile of young architects.
keywords	Virtual Cities, Network Society, Informational Technology, Virtual Learning Environments
series	SIGRADI
email
last changed	2016/03/10 10:01

_id	avocaad_2003_17
id	avocaad_2003_17
authors	Anna Maria Chrabin, Jaroslaw Szewczyk and Herman Neuckermans
year	2003
title	A Critical Evaluation of Early Stages Software in its Capacity of Coping with Contextual Issues
source	LOCAL VALUES in a NETWORKED DESIGN WORLD - ADDED VALUE OF COMPUTER AIDED ARCHITECTURAL DESIGN, Stellingwerff, Martijn and Verbeke, Johan (Eds.), (2004) DUP Science - Delft University Press, ISBN 90-407-2507-1.
summary	In this paper we analyse critically early design stages software in its capacity of coping with contextual data at large (i.e. representing cultural, aesthetical context, etc.). We identified 5 categories of early stages software: geometry based graphic editors, evaluation architectural software, generative and shape-grammar based systems, evolutionary systems and other systems. Calling the object under creation during of the early stages a CAD conceptual model, we will investigate to what extend this software allows the architect to experience and represent the context in which a design is situated. Especially we will focus on its capacity to allow interaction, playful interaction on our way to the design. Designers, and particularly architects, interact with the local context similarly to interacting in a game: the context influences the users’ decisions, surprises them and causes permanent changes to their ways of thinking. On the other hand, architects permanently shape and reshape the context, and reduce the context to a protean point of reference. Such behaviour characterises creative thinking that is crucial for the early stage of design. The investigation led us to the conclusions that the effective interactivity with the context needs simple rules, a plain interface and data reduced as simple as possible, especially when interaction with the context is performed during the early stages of a design process. The findings can be used in organising computer environments for early-stage design.
keywords	Architecture, Local values, Globalisation, Computer Aided Architectural Design
series	AVOCAAD
email
last changed	2006/01/16 21:38

For more results click below: