Cumincad : CUMINCAD Papers : Search Results

CumInCAD is a Cumulative Index about publications in Computer Aided Architectural Design
supported by the sibling associations ACADIA, CAADRIA, eCAADe, SIGraDi, ASCAAD and CAAD futures

PDF papers
References

Hits 1 to 20 of 570

Reformat results as: short short into frame detailed detailed into frame

_id	sigradi2006_e028c
id	sigradi2006_e028c
authors	Griffith, Kenfield; Sass, Larry and Michaud, Dennis
year	2006
title	A strategy for complex-curved building design:Design structure with Bi-lateral contouring as integrally connected ribs
source	SIGraDi 2006 - [Proceedings of the 10th Iberoamerican Congress of Digital Graphics] Santiago de Chile - Chile 21-23 November 2006, pp. 465-469
summary	Shapes in designs created by architects such as Gehry Partners (Shelden, 2002), Foster and Partners, and Kohn Peterson and Fox rely on computational processes for rationalizing complex geometry for building construction. Rationalization is the reduction of a complete geometric shape into discrete components. Unfortunately, for many architects the rationalization is limited reducing solid models to surfaces or data on spread sheets for contractors to follow. Rationalized models produced by the firms listed above do not offer strategies for construction or digital fabrication. For the physical production of CAD description an alternative to the rationalized description is needed. This paper examines the coupling of digital rationalization and digital fabrication with physical mockups (Rich, 1989). Our aim is to explore complex relationships found in early and mid stage design phases when digital fabrication is used to produce design outcomes. Results of our investigation will aid architects and engineers in addressing the complications found in the translation of design models embedded with precision to constructible geometries. We present an algorithmically based approach to design rationalization that supports physical production as well as surface production of desktop models. Our approach is an alternative to conventional rapid prototyping that builds objects by assembly of laterally sliced contours from a solid model. We explored an improved product description for rapid manufacture as bilateral contouring for structure and panelling for strength (Kolarevic, 2003). Infrastructure typically found within aerospace, automotive, and shipbuilding industries, bilateral contouring is an organized matrix of horizontal and vertical interlocking ribs evenly distributed along a surface. These structures are monocoque and semi-monocoque assemblies composed of structural ribs and skinning attached by rivets and adhesives. Alternative, bi-lateral contouring discussed is an interlocking matrix of plywood strips having integral joinery for assembly. Unlike traditional methods of building representations through malleable materials for creating tangible objects (Friedman, 2002), this approach constructs with the implication for building life-size solutions. Three algorithms are presented as examples of rationalized design production with physical results. The first algorithm [Figure 1] deconstructs an initial 2D curved form into ribbed slices to be assembled through integral connections constructed as part of the rib solution. The second algorithm [Figure 2] deconstructs curved forms of greater complexity. The algorithm walks along the surface extracting surface information along horizontal and vertical axes saving surface information resulting in a ribbed structure of slight double curvature. The final algorithm [Figure 3] is expressed as plug-in software for Rhino that deconstructs a design to components for assembly as rib structures. The plug-in also translates geometries to a flatten position for 2D fabrication. The software demonstrates the full scope of the research exploration. Studies published by Dodgson argued that innovation technology (IvT) (Dodgson, Gann, Salter, 2004) helped in solving projects like the Guggenheim in Bilbao, the leaning Tower of Pisa in Italy, and the Millennium Bridge in London. Similarly, the method discussed in this paper will aid in solving physical production problems with complex building forms. References Bentley, P.J. (Ed.). Evolutionary Design by Computers. Morgan Kaufman Publishers Inc. San Francisco, CA, 1-73 Celani, G, (2004) “From simple to complex: using AutoCAD to build generative design systems” in: L. Caldas and J. Duarte (org.) Implementations issues in generative design systems. First Intl. Conference on Design Computing and Cognition, July 2004 Dodgson M, Gann D.M., Salter A, (2004), “Impact of Innovation Technology on Engineering Problem Solving: Lessons from High Profile Public Projects,” Industrial Dynamics, Innovation and Development, 2004 Dristas, (2004) “Design Operators.” Thesis. Massachusetts Institute of Technology, Cambridge, MA, 2004 Friedman, M, (2002), Gehry Talks: Architecture + Practice, Universe Publishing, New York, NY, 2002 Kolarevic, B, (2003), Architecture in the Digital Age: Design and Manufacturing, Spon Press, London, UK, 2003 Opas J, Bochnick H, Tuomi J, (1994), “Manufacturability Analysis as a Part of CAD/CAM Integration”, Intelligent Systems in Design and Manufacturing, 261-292 Rudolph S, Alber R, (2002), “An Evolutionary Approach to the Inverse Problem in Rule-Based Design Representations”, Artificial Intelligence in Design ’02, 329-350 Rich M, (1989), Digital Mockup, American Institute of Aeronautics and Astronautics, Reston, VA, 1989 Schön, D., The Reflective Practitioner: How Professional Think in Action. Basic Books. 1983 Shelden, D, (2003), “Digital Surface Representation and the Constructability of Gehry’s Architecture.” Diss. Massachusetts Institute of Technology, Cambridge, MA, 2003 Smithers T, Conkie A, Doheny J, Logan B, Millington K, (1989), “Design as Intelligent Behaviour: An AI in Design Thesis Programme”, Artificial Intelligence in Design, 293-334 Smithers T, (2002), “Synthesis in Designing”, Artificial Intelligence in Design ’02, 3-24 Stiny, G, (1977), “Ice-ray: a note on the generation of Chinese lattice designs” Environmental and Planning B, volume 4, pp. 89-98
keywords	Digital fabrication; bilateral contouring; integral connection; complex-curve
series	SIGRADI
email
last changed	2016/03/10 09:52

_id	acadia11_138
id	acadia11_138
authors	Buell, Samantha; Shaban, Ryan; Corte, Daniel; Beorkrem, Christopher
year	2011
title	Zero-waste, Flat Pack Truss Work: An Investigation of Responsive Structuralism
doi	https://doi.org/10.52842/conf.acadia.2011.138
source	ACADIA 11: Integration through Computation [Proceedings of the 31st Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA)] [ISBN 978-1-6136-4595-6] Banff (Alberta) 13-16 October, 2011, pp. 138-143
summary	The direct and rapid connections between scripting, modeling and prototyping allow for investigations of computation in fabrication. The manipulation of planar materials with two-dimensional CNC cuts can easily create complex and varied forms, volumes, and surfaces. However, the bulk of research on folding using CNC fabrication tools is focused upon surfaces, self-supporting walls and shell structures, which do not integrate well into more conventional building construction models.This paper attempts to explain the potential for using folding methodologies to develop structural members through a design-build process. Conventional building practice consists of the assembly of off-the-shelf parts. Many times, the plinth, skeleton, and skin are independently designed and fabricated, integrating multiple industries. Using this method of construction as an operative status quo, this investigation focused on a single structural component: the truss. A truss is defined as: “A triangulated arrangement of structural members that reduces nonaxial external forces to a set of axial forces in its members.” (Allen and Iano 2004)Using folding methodologies and sheet steel to create a truss, this design investigation employed a recyclable and prolific building material to redefine the fabrication of a conventional structural member. The potential for using digital design and two-dimensional CNC fabrication tools in the design of a foldable truss from sheet steel is viable in the creation of a flat-packed, minimal waste structural member that can adapt to a variety of aesthetic and structural conditions. Applying new methods to a component of the conventional ‘kit of parts’ allowed for a novel investigation that recombines zero waste goals, flat-packing potential, structural expression and computational processes.
series	ACADIA
type	normal paper
email
last changed	2022/06/07 07:54

_id	disschoo
id	disschoo
authors	Choo, Seung Yeon
year	2004
title	STUDY ON COMPUTER-AIDED DESIGN SUPPORT OF TRADITIONAL ARCHITECTURAL THEORIES
source	Technische Universität München
summary	The research presented in this thesis describes a computer-aided design support of traditional architectural theories. Traditional architectural theories in western architecture have been considered as a basis for answering the fundamental questions of architecture: proportion, symmetry, colour, harmony and so on. In particular, the aesthetic aspect of these theories has been one of many important architectural aspects, and which is concerned with the field of architecture in determining the beauty of architectural form. The most significant role of the traditional theories in architecture is to maintain unity, to avoid chaos and then to achieve harmony in a design, using some specific design principles. However, current technology-guided constructions tend to neglect often the importance of these theories due to the standardization of building elements, due to mechanically-prepared construction and the reducing completion costs, etc. Thus, this research proposes a design support system as a design assistant that gives an intelligent advice on architectural design, using analytical design- and ordering- principles of traditional theories for the optimization of the architectural design from the aesthetic perspective. To evaluate the aesthetic quality of an architectural design, this system is implemented in the AutoCAD environment, using the AutoLISP. It is applied so as to explain and develop aesthetic qualities of a design. Designs proposed by this system include optimum designs, which are based on the traditional architectural theories, and new ones which can be in future connected to information models. To do this, the definition of information about building elements is accomplished by using the neutral format EXPRESS and EXPRESS-G for such application systems. The results of the application system are presented, such as the easily generating and quickly conceptualising of an object model, the checking of the aesthetic value of the design during the various design phases, the helping to find direction during rational searching for a solution. The user can easily appreciate the usefulness of the proposed system as a set of tools for searching for rational architectural aesthetics and formal solutions at different design-stages. It is to be hoped that a new "traditional" fundamental of architecture, such as the proposed system, incorporating CAAD systems, will find its place among new technological methods in the AEC industry and so help to bridge the gap between the value of traditional architecture and CAAD systems.
keywords	Aesthetics, Design Theory, Order Principle, Product Model, IFC, AutoCAD/AutoLISP
series	thesis:PhD
type	normal paper
email
more	http://tumb1.biblio.tu-muenchen.de/publ/diss/ar/2004/choo.html
last changed	2004/05/23 07:05

_id	ijac20042405
id	ijac20042405
authors	Heitor, Teresa V.; Duarte, José P.; Pinto, Rafaela M.
year	2004
title	Combing Grammars and Space Syntax: Formulating, Generating and Evaluating Designs
source	International Journal of Architectural Computing vol. 2 - no. 4, 492-515
summary	This paper is concerned with how two different computational approaches to design – shape grammars and space syntax – can be combined into a single common framework for formulating, generating, and evaluating designs. The main goal is to explore how the formal principles applied in the design process interact with the spatial properties of the designed objects. Results suggest that space syntax is (1) useful in determining the universe of solutions generated by the grammar and (2) in evaluating the evolving designs in terms of spatial properties and, therefore, in guiding the generation of designs.
series	journal
email
more	http://www.multi-science.co.uk/ijac.htm
last changed	2007/03/04 07:08

_id	acadia04_230
id	acadia04_230
authors	Johnson, Scott
year	2004
title	Linking Analysis and Architectural Data: Why It's Harder than We Thought
doi	https://doi.org/10.52842/conf.acadia.2004.230
source	Fabrication: Examining the Digital Practice of Architecture [Proceedings of the 23rd Annual Conference of the Association for Computer Aided Design in Architecture and the 2004 Conference of the AIA Technology in Architectural Practice Knowledge Community / ISBN 0-9696665-2-7] Cambridge (Ontario) 8-14 November, 2004, 230-243
summary	This paper considers high-level, architecturally oriented representations, like Building Information Models (BIMs), and examines the difficulty of integrating analyses with such representations. Structural analysis is selected as a sample analysis domain, and is examined by integrating a structural analysis into the test implementation of a program that utilizes architecturally oriented elements. A fundamental problem is found to be that architecturally oriented elements are inappropriate for structural analysis. Methods for sequentially analyzing architectural elements are discussed, but are found to be inadequate. Accurate analysis requires analyzing the entire structure at once using a representation specific to structural analysis. A method for generating a structural representation based on the architectural representation is discussed, but the process is not simple. The process is complicated by the fact that architectural elements and structural elements do not correspond in a one-to-one or even a one-to-many manner. An accurate structural representation may even require semi-fictitious elements not corresponding to actual physical components. These findings are believed to be true for other analysis domains, as well.
keywords	Representations, Building Information Models, Proteus, structural analysis, finite elements
series	ACADIA
email
last changed	2022/06/07 07:52

_id	acadia07_284
id	acadia07_284
authors	Robinson, Kirsten; Gorbet, Robert; Beesley, Philip
year	2007
title	Evolving Cooperative Behaviour in a Reflexive Membrane
doi	https://doi.org/10.52842/conf.acadia.2007.284
source	Expanding Bodies: Art • Cities• Environment [Proceedings of the 27th Annual Conference of the Association for Computer Aided Design in Architecture / ISBN 978-0-9780978-6-8] Halifax (Nova Scotia) 1-7 October 2007, 284-293
summary	This paper describes the integration of machine intelligence into an immersive architectural sculpture that interacts dynamically with users and the environment. The system is conceived to function as an architectural envelope that might transfer air using a distributed array of components. The sculpture includes a large array of interconnected miniature structural and kinetic elements, each with local sensing, actuation, and machine intelligence. We demonstrate a model in which these autonomous, interconnected agents develop cooperative behaviour to maximize airflow. Agents have access to sensory data about their local environment and ‘learn’ to move air through the working of a genetic algorithm. Introducing distributed and responsive machine intelligence builds on work done on evolving embodied intelligence (Floreano et al. 2004) and architectural ‘geotextile’ sculptures by Philip Beesley and collaborators (Beesley et al. 1996-2006). The paper contributes to the general field of interactive art by demonstrating an application of machine intelligence as a design method. The objective is the development of coherent distributed kinetic building envelopes with environmental control functions. A cultural context is included, discussing dynamic paradigms in responsive architecture.
series	ACADIA
type	normal paper
email
last changed	2022/06/07 08:00

_id	ddss2004_ra-247
id	ddss2004_ra-247
authors	Bi, G. and B. Medjdoub
year	2004
title	Hybrid Approach to Solve Space Planning Problems in Building Services
source	Van Leeuwen, J.P. and H.J.P. Timmermans (eds.) Recent Advances in Design & Decision Support Systems in Architecture and Urban Planning, Dordrecht: Kluwer Academic Publishers, ISBN: 1-4020-2408-8, p. 247-261
summary	In this paper an object-based CAD programming is used to take advantage of standardization to handle the schematic design, sizing, layout for services in a building ceiling void. From the specification of the building 3D model, our software proceeds through different steps; from the determination of the standard number and size of fan coils to the generation of 3D solutions. In order to deal with more complex geometry and larger problems, we have used a hybrid approach: Case Based Reasoning (CBR) within Constraint Satisfaction Problem (CSP) approaches. In practice, engineers in building services use previous solutions and adapt them to new problems. CBR mirrors this practical approach and does help us to deal with increasingly complex geometry effectively, and meanwhile CSP has been used for layout adaptation. The results have shown that it is possible to define and implement standard solutions to produce designs comparable with current practice. The benchmarking exercise has underlined many advantages and made some suggestions for further development. This project is funded by The Engineering and Physical Sciences Research Council (EPSRC) in UK.
keywords	Case-Based Reasoning, Constraint Satisfaction Problem, Ceiling Voids Layout, Complex Geometry, Large Problem
series	DDSS
last changed	2004/07/03 22:13

_id	eaea2003_25-ws-breen
id	eaea2003_25-ws-breen
authors	Breen, J.
year	2004
title	Towards a Virtual Design Media Museum. Identifying, Structuring and Presenting Design and (Re) Presentation Media Artifacts
source	Spatial Simulation and Evaluation - New Tools in Architectural and Urban Design [Proceedings of the 6th European Architectural Endoscopy Association Conference / ISBN 80-227-2088-7], pp. 122-132
summary	Designing is largely a process of (inter)active imaging. The evolvement of a design concept from preliminary design proposal towards spatial and material environment generally follows an uncertain path through uncharted landscape; a journey of exploration which requires both rational and creative consideration, frequently involving the interchange of information within a design team and collaboration with representatives from different contributing disciplines. Designs are conceived, worked out and specified step by step (roughly speaking from ‘rough to fine’) in iterative design ‘loops’. All the time the designer tries to determine which ‘course’ should be taken, by considering reference material, by reflecting on conceptions developed previously and by generating specific options aimed at furthering the ‘concretisation’ of the end product. In the course of such a trajectory, visual information is continually being developed, selected, tested, and subsequently either discarded or perfected. From early times architects have been considered not only as knowledgeable ‘experts’ in the field of building as a craft, but also as ‘creative directors’ of such development processes. The architect should be capable of not only conjuring up visions of the future spatial and material form of the building, but also of conveying these to the other ‘actors’ involved in the initiation and building process. Such ‘sharing’ of information is necessary in order to generate sufficient understanding, consensus, enthusiasm, as well as means. To become more than ‘figments of the imagination’, the designer’s ideas need to be ‘pinned down’ (even if they are not yet entirely finished) and communicated by using some form of reliable – and preferably readable – ‘language’ for design development and communication.
series	EAEA
more	http://info.tuwien.ac.at/eaea
last changed	2005/09/09 10:43

_id	ecaaderis2018_103
id	ecaaderis2018_103
authors	Davidová, Marie and Prokop, Šimon
year	2018
title	TreeHugger - The Eco-Systemic Prototypical Urban Intervention
source	Odysseas Kontovourkis (ed.), Sustainable Computational Workflows [6th eCAADe Regional International Workshop Proceedings / ISBN 9789491207143], Department of Architecture, University of Cyprus, Nicosia, Cyprus, 24-25 May 2018, pp. 75-84
keywords	The paper discusses co-design, development, production, application of TreeHugger (see Figure 1). The co-design among community and trans-disciplinary participants with different expertise required scope of media mix, switching between analogue, digital and back again. This involves different degrees of physical and digital 'GIGA-Mapping' (Sevaldson, 2011, 2015), 'Grasshopper3d' (Davidson, 2017) scripting and mix of digital and analogue fabrication to address the real life world. The critical participation of this 'Time-Based Design' (Sevaldson, 2004, 2005) process is the interaction of the prototype with eco-systemic agency of the adjacent environment - the eco-systemic performance. The TreeHugger is a responsive solid wood insect hotel, generating habitats and edible landscaping (Creasy, 2004) on bio-tope in city centre of Prague. To extend the impact, the code was uploaded for communities to download, local-specifically edit and apply worldwide. Thus, the fusion of discussed processes is multi-scaled and multi-layered, utilised in emerging design field: Systemic Approach to Architectural Performance.
series	eCAADe
email
last changed	2018/05/29 14:33

_id	acadia04_076
id	acadia04_076
authors	Hanna, Sean
year	2004
title	Modularity and Flexibility at the Small Scale: Evolving Continuous Material Variation with Stereolithography
doi	https://doi.org/10.52842/conf.acadia.2004.076
source	Fabrication: Examining the Digital Practice of Architecture [Proceedings of the 23rd Annual Conference of the Association for Computer Aided Design in Architecture and the 2004 Conference of the AIA Technology in Architectural Practice Knowledge Community / ISBN 0-9696665-2-7] Cambridge (Ontario) 8-14 November, 2004, 76-87
summary	In this paper, we introduce a technique by which the internal material properties of an object can be optimised at a microstructural level (5x10-5m) to counteract the forces that are applied to it. These can then be fabricated using the rapid prototyping method of stereolithography. The proposed technique is analogous to principles of mass customization and takes advantage of a flexible module to create complex structures in a manner that is computationally efficient and effective. The process is two-staged, in which a genetic algorithm evolves the topology of the microstructure and a second algorithm incorporating Finite Element Analysis then optimises the geometry. The examples shown are designed specifically for the fabrication technique, but the method and general principles are applicable to structural problems at any scale.
keywords	genetic algorithm, rapid prototyping, stereolithography, materials
series	ACADIA
email
last changed	2022/06/07 07:50

_id	eaea2003_0
id	eaea2003_0
authors	Kardos, P. and Urland, U. (Eds.)
year	2004
title	SPATIAL SIMULATION AND EVALUATION - NEW TOOLS IN ARCHITECTURAL AND URBAN DESIGN
source	Proceedings of the 6th European Architectural Endoscopy Association Conference / ISBN 80-227-2088-7, 144 p.
summary	The 5th eaea Conference in Essen yielded four principal findings: • After having been limited to endoscopic picture and film renderings of analog scaled models, the european architectural endoscopy association (eaea) first bridged the gap to digital environmental simulations at this conference. It is not about a better or correct method, but a suitable method of representing the planned reality of a particular project using ways that make sense. The combination of digital and analog simulation media is a source of impetus to the user of both methods. The future belongs to the casespecific application and the numerous integration possibilities of the two different media. • In investigating the perception of pictures produced in both analog and digital form, it was ascertained that it was only after greater effort that the same level of pleasing qualities were achieved in the digital world, compared to pictures of analog scaled models. It seems that for many planning phases model-based pictures are superior to digital photos – with regards to economy, quality of representation and imaginative attributes. This last point seems to be especially important in the draft planning stages: the less sharp a picture is, the more remaining room for viewer interpretation there is. In particular, the high degree of precision characteristic of digital simulations no longer allows room for imagination in the individual viewer. • 3D environmental simulations will increasingly be incorporated with success in architecture and urban design courses at universities and colleges both here in Germany as well as abroad. The further spread of these techniques to other universities and colleges is desirable. Over and above application as a pedagogic tool, the use of these simulations by architects and city planners, private planning agencies and municipal planning administrators will also be in evidence in the future – for checking designs, for informing the involved parties, for establishing the decisions of government bodies, for marketing the project. • Also, the interactive use of endoscopic simulation facilities continually opens new fields of research – whether it be for registering subjective distance perception, whether it be for determining orientation possibilities in open spaces.
series	EAEA
type	normal paper
email
more	http://info.tuwien.ac.at/eaea
last changed	2005/09/09 10:43

_id	acadia04_100
id	acadia04_100
authors	Liapi, Katherine
year	2004
title	A computer Based System for the Design and Fabrication of Tensegrity Structures
doi	https://doi.org/10.52842/conf.acadia.2004.100
source	Fabrication: Examining the Digital Practice of Architecture [Proceedings of the 23rd Annual Conference of the Association for Computer Aided Design in Architecture and the 2004 Conference of the AIA Technology in Architectural Practice Knowledge Community / ISBN 0-9696665-2-7] Cambridge (Ontario) 8-14 November, 2004, 100-109
summary	Tensegrity structures are composed of tension compression components, where the compression components (bars) are discontinuously enclosed within continuous tensile components (cables). From an engineering point of view, a tensegrity structure is characterized by geometric non-linearity and large displacements under loading. Therefore, its prestressed shape and deformation under loading are the result of the combined effect of the geometric parameters that determine the initial configuration of the structure, the level of prestress applied to cables, and the material properties of the component members of the structure. A method for generating the initial geometric configuration of tensegrity structures composed of tensegrity units and a parametric expression of this geometry have already been developed. A novel technology that makes possible the construction of tensegrity structures from the on-site assembly of deployable tensegrity units, which are furnished with a simple mechanism that permits bar-elongation, and, as a result, an increase of the prestress applied to the cables of each unit, is also under development. Also under development is a static analysis method that takes into account the above method for prestressing cables. This paper discusses the features of a system that supports the combined geometric and structural design of tensegrity structures, and integrates a graphical interface to display: a) models of initial geometry, b) geometry of the structure after prestress and loading are applied, and c) magnitude of forces applied to the structure’s component members (bars and cables). The system also provides numerical data to be used in component fabrication, and is therefore expected to become a very valuable tool for the design and construction of tensegrity structures.
series	ACADIA
last changed	2022/06/07 07:59

_id	acadia04_176
id	acadia04_176
authors	Loukissas, Yanni and Sass, Lawrence
year	2004
title	RULEBUILDING (3D PRINTING: OPERATORS, CONSTRAINTS, SCRIPTS)
doi	https://doi.org/10.52842/conf.acadia.2004.176
source	Fabrication: Examining the Digital Practice of Architecture [Proceedings of the 23rd Annual Conference of the Association for Computer Aided Design in Architecture and the 2004 Conference of the AIA Technology in Architectural Practice Knowledge Community / ISBN 0-9696665-2-7] Cambridge (Ontario) 8-14 November, 2004, 176-185
summary	3-D printers alter the speed, cost, complexity, and consistency with which physical architecture models can be crafted. If architects are to harness the unique abilities of this modeling process, it is necessary to find a complementary means of conceptualizing designs and generating the geometric data necessary for 3-D printing. This paper introduces a novel combination of 3-D printing and scripting through three examples of architectural surface models. In these examples, VBScript is used to write generative scripts for execution within the Rhinoceros modeling environment. The scripts produce digital geometric models which, in turn, are exported to a Z-Corp 3-D printer. The merits of this methodology are demonstrated, in one example, through models of an architectural surface composed of light-modulating conical components. The design intent in this example is a grid of responsive components which ride on a complex curved surface and steer toward a light. The written script is an explicit representation of this intention. Methods in the script use external parameters to generate a digital geometric model. The form of the subsequent printed model is calculated as a function of the initial parameters, two boundary splines and a vector indicating the orientation of the light. By varying these parameters, a set of design options can be generated and 3-D printed for comparison. The combination of scripting and 3-D printing allows complex design intentions to be managed in a concise, sharable format and modeled iteratively without manual intervention.
keywords	Generative, Scripting, Rapid Prototyping, 3-D Printing, Architectural Design
series	ACADIA
type	normal paper
email
last changed	2022/06/07 07:59

_id	acadia16_140
id	acadia16_140
authors	Nejur, Andrei; Steinfeld, Kyle
year	2016
title	Ivy: Bringing a Weighted-Mesh Representations to Bear on Generative Architectural Design Applications
doi	https://doi.org/10.52842/conf.acadia.2016.140
source	ACADIA // 2016: POSTHUMAN FRONTIERS: Data, Designers, and Cognitive Machines [Proceedings of the 36th Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) ISBN 978-0-692-77095-5] Ann Arbor 27-29 October, 2016, pp. 140-151
summary	Mesh segmentation has become an important and well-researched topic in computational geometry in recent years (Agathos et al. 2008). As a result, a number of new approaches have been developed that have led to innovations in a diverse set of problems in computer graphics (CG) (Sharmir 2008). Specifically, a range of effective methods for the division of a mesh have recently been proposed, including by K-means (Shlafman et al. 2002), graph cuts (Golovinskiy and Funkhouser 2008; Katz and Tal 2003), hierarchical clustering (Garland et al. 2001; Gelfand and Guibas 2004; Golovinskiy and Funkhouser 2008), primitive fitting (Athene et al. 2004), random walks (Lai et al.), core extraction (Katz et al.) tubular multi-scale analysis (Mortara et al. 2004), spectral clustering (Liu and Zhang 2004), and critical point analysis (Lin et al. 20070, all of which depend upon a weighted graph representation, typically the dual of a given mesh (Sharmir 2008). While these approaches have been proven effective within the narrowly defined domains of application for which they have been developed (Chen 2009), they have not been brought to bear on wider classes of problems in fields outside of CG, specifically on problems relevant to generative architectural design. Given the widespread use of meshes and the utility of segmentation in GAD, by surveying the relevant and recently matured approaches to mesh segmentation in CG that share a common representation of the mesh dual, this paper identifies and takes steps to address a heretofore unrealized transfer of technology that would resolve a missed opportunity for both subject areas. Meshes are often employed by architectural designers for purposes that are distinct from and present a unique set of requirements in relation to similar applications that have enjoyed more focused study in computer science. This paper presents a survey of similar applications, including thin-sheet fabrication (Mitani and Suzuki 2004), rendering optimization (Garland et al. 2001), 3D mesh compression (Taubin et al. 1998), morphin (Shapira et al. 2008) and mesh simplification (Kalvin and Taylor 1996), and distinguish the requirements of these applications from those presented by GAD, including non-refinement in advance of the constraining of mesh geometry to planar-quad faces, and the ability to address a diversity of mesh features that may or may not be preserved. Following this survey of existing approaches and unmet needs, the authors assert that if a generalized framework for working with graph representations of meshes is developed, allowing for the interactive adjustment of edge weights, then the recent developments in mesh segmentation may be better brought to bear on GAD problems. This paper presents work toward the development of just such a framework, implemented as a plug-in for the visual programming environment Grasshopper.
keywords	tool-building, design simulation, fabrication, computation, megalith
series	ACADIA
type	paper
email
last changed	2022/06/07 07:58

_id	2004_318
id	2004_318
authors	Ng, Edward
year	2004
title	Optimise Urban Daylight Design Using Computational Simulations
doi	https://doi.org/10.52842/conf.ecaade.2004.318
source	Architecture in the Network Society [22nd eCAADe Conference Proceedings / ISBN 0-9541183-2-4] Copenhagen (Denmark) 15-18 September 2004, pp. 318-324
summary	Urban design is about providing an infrastructure for its inhabitants. An important consideration of design is to provide natural outdoor conditions that are pleasant and conductive to human activities. A well designed outdoor urban environment will also make the design of individual buildings within it easier. There are many design parameters, for example: Development Density, Plot ratio, Site Coverage, Skyline, Building to Space Ratio, Permeability, Building Shapes and so on. This paper reports a study based on „skylines“ as a design parameter, and how it affects daylight and natural ventilation provisions and performance. Experiments are conducted with physical models in artificial sky, as well as using computational lighting simulations. The study establishes that by varying the skylines of the city, the overall daylight performances could be improved when compared to a city with a uniform skyline - given the same density. The message of the paper is that: through better understanding and design, high density cities could be planned and optimised without losing the development efficacy of the land.
keywords	Daylight; Parametric Study; Urban Design; Density
series	eCAADe
email
last changed	2022/06/07 07:58

_id	sigradi2008_166
id	sigradi2008_166
authors	Papanikolaou, Dimitris
year	2008
title	Digital Fabrication Production System Theory: Towards an Integrated Environment for Design and Production of Assemblies
source	SIGraDi 2008 - [Proceedings of the 12th Iberoamerican Congress of Digital Graphics] La Habana - Cuba 1-5 December 2008
summary	A Digital Fabrication Production System (DFPS) is a concept describing a set of processes, tools, and resources that will be able to produce an artifact according to a design, fast, cheap, and easy, independently of location. A DFPS project is a complex assembly of custom parts that is delivered by a network of fabrication and assembly processes. This network is called the value chain. The workflow concept of a DFPS is the following: begin design process with a custom geometric form; decompose it into constructible parts; send the part files for fabrication to various locations; transport all parts at the construction site at the right time; finally, assemble the final artifact. Conceptually it means that based on a well structured value chain we could build anything we want, at anyplace, at controllable cost and quality. The goals of a DFPS are the following: custom shapes, controllable lead time, controllable quality, controllable cost, easiness of fabrication, and easiness of assembly. Simply stated this means to build any form, anywhere, accurately, cheap, fast, and easy. Unfortunately, the reality with current Digital Fabrication (DF) projects is rather disappointing: They take more time than what was planned, they get more expensive than what was expected, they involve great risk and uncertainty, and finally they are too complex to plan, understand, and manage. Moreover, most of these problems are discovered during production when it is already late for correction. However, there is currently no systematic approach to evaluate difficulty of production of DF projects in Architecture. Most of current risk assessment methods are based on experience gathered from previous similar cases. But it is the premise of mass customization that projects can be radically different. Assembly incompatibilities are currently addressed by building physical mockups. But physical mockups cause a significant loss in both time and cost. All these problems suggest that an introduction of a DFPS for mass customization in architecture needs first an integrated theory of assembly and management control. Evaluating feasibility of a DF project has two main problems: first, how to evaluate assemblability of the design; second, how to evaluate performance of the value chain. Assemblability is a system’s structure problem, while performance is a system’s dynamics problem. Structure of systems has been studied in the field of Systems Engineering by Network Analysis methods such as the Design Structure Matrix (DSM) (Steward 1981), and the liaison graph (Whitney 2004), while dynamics of systems have been studied by System Dynamics (Forrester 1961). Can we define a formal method to evaluate the difficulty of production of an artifact if we know the artifact’s design and the production system’s structure? This paper formulates Attribute Process Methodology (APM); a method for assessing feasibility of a DFPS project that combines Network Analysis to evaluate assemblability of the design with System Dynamics to evaluate performance of the value chain.
keywords	Digital Fabrication, Production System, System Dynamics, Network Analysis, Assembly
series	SIGRADI
email
last changed	2016/03/10 09:57

_id	2004_095
id	2004_095
authors	Sass, Larry
year	2004
title	Design for Self Assembly of Building Components using Rapid Prototyping
doi	https://doi.org/10.52842/conf.ecaade.2004.095
source	Architecture in the Network Society [22nd eCAADe Conference Proceedings / ISBN 0-9541183-2-4] Copenhagen (Denmark) 15-18 September 2004, pp. 95-104
summary	Design of assemblies will become an area of study when using rapid prototyping devices in the architectural design process becomes standard practice. This paper is a presentation of a design process study focused on understanding a method of working with rapid prototyping devices in a creative design process. This paper has an emphasis is on the creation of physically large models. These models are built from many layers of detail and are too large to print on a conventional 3D building device (3D printer). In response to this is a proposal to design assemblies as a means to create models of parts manufactured with rapid prototyping devices. Design for Assembly (DFA) becomes an exclusive process within this method of model making. Designing assemblies as part of a creative design enterprise offers greater knowledge of the building's construct at an early stage of the process. As an example, there are three physical models built from 3D CAD descriptions for this study. These models are manufactured from various rapid prototyping devices and differing processes of assembly. They are evidence of DFA as a necessary process in architectural design when using rapid prototyping devices.
keywords	Digital Fabrication, Design Methods, Design for Assembly
series	eCAADe
last changed	2022/06/07 07:57

_id	ascaad2004_paper7
id	ascaad2004_paper7
authors	Satti, Hassan M. and Robert J. Krawczyk
year	2004
title	Issues of Integrating Building Codes in CAD
source	eDesign in Architecture: ASCAAD's First International Conference on Computer Aided Architectural Design, 7-9 December 2004, KFUPM, Saudi Arabia
summary	In this age of information revolution, design professionals are looking forward to exploring new methods and tools that could help them in delivering better designs and particularly understanding and incorporating of code-compliant design provisions in their projects. Automation of building code analysis is a vital factor in leveraging building codes from what is as a textual legal document to more graphical interactive source of building criteria. The argument of the paper will be based on the International Building Code (IBC) which is issued by the International Code Council (ICC) and considered as the most comprehensive and coordinated national model code in the US and is currently commonly used and enforced in 44 states. The paper will also examine and report on the purpose, types, interpretation, understanding and use of building codes applied in the United States; evaluation of recent research activities on automation of building code analysis; evaluation of current building code analysis tools; and a conceptual framework of a Computer-Aided Analysis of Design (CAAnD) program for building codes that could assist design professionals during project design development.
series	ASCAAD
email
last changed	2007/04/08 19:47

_id	179e
id	179e
authors	Schnabel, Marc Aurel
year	2004
title	ARCHITECTURAL DESIGN IN VIRTUAL ENVIRONMENTS: EXPLORING COGNITION AND COMMUNICATION IN IMMERSIVE VIRTUAL ENVIRONMENTS
source	Department of Architecture, The University of Hong Kong
summary	There is a distance between the idea in the imagination of a design and its representation, communication and realisation. Architects use a variety of tools to bridge this gap. Each tool places different demands on the designer and each, through inherent characteristics and affordances, introduces reinterpretations of the design idea, thus imposing a divergence between the idea and the expression of the idea. Design is an activity that is greatly complex, influenced by numerous factors. The process may follow rules or established proceedings and traditions. Alternatively, the designer may choose to explore freely with no need to conventions. In all instances, the medium in which the exploration takes place will affect the act of designing to some degree. Tools are chosen, in part, to facilitate the chosen design process. Most researches on Virtual Environments (VE) have focused on their use as presentation or simulation environments. There has been inadequate research in the use of VE for designing. It has been suggested that this tool can empower designers to express, explore and convey their imagination more easily. For these reasons the very different nature of VE may allow architects to create designs that make use of the properties of VE that other tools do not offer in that way. As yet, barely any basic research has examined the use of VE to support the acts of designing. This thesis examines the implications of architectural design within VE. Perception and comprehension of spatial volumes within VE is examined by the comparison of representations using conventional architectural design method. A series of experiments was conducted to investigate the relative effectiveness of both immersive and non-immersive VE by looking at the creation, interpretation and communication of architectural design. The findings suggest why form comprehension and finding may be enhanced within VE activity. The thesis draws conclusions by comparing the results with conventional methods of two-dimensional depictions as they appear on paper or three-dimensional representations such as physical models.
keywords	Virtual Environments; Virtual Environment Design Studio; VeDS; Collaborative Design; Cognition; Communication
series	thesis:PhD
type	normal paper
email
last changed	2005/11/15 05:53

_id	avocaad_2003_10
id	avocaad_2003_10
authors	Sevil Sariyildiz, Ozer Ciftcioglu, Bige Tunçer and Rudi Stouffs
year	2003
title	Knowledge Model for Cultural Analogy in Design and Design Education
source	LOCAL VALUES in a NETWORKED DESIGN WORLD - ADDED VALUE OF COMPUTER AIDED ARCHITECTURAL DESIGN, Stellingwerff, Martijn and Verbeke, Johan (Eds.), (2004) DUP Science - Delft University Press, ISBN 90-407-2507-1.
summary	Almost every architect uses analogy while designing. The source of inspiration is nature, technology, geometry, etc., besides the influence of the work of other architects. Analogy in architecture has a close relationship with culture as well. Culture is a dynamic occurrence and evolves by the influence of many aspects such as technological, economical, environmental and social. In the process of design, architects built op knowledge from their own experience and designs, but also from the other designers work. Usually, architects develop this quality and ability during the education, and later by trial and error methodwhile practising the design. This is habitually done based on own conscience, intuition and experience.The developments in ICKT (Information, Communication and Knowledge Technology) as a part of broader technological developments and the ongoing globalisation, influences the culture as a dynamic process and therefore the architecture.. It is necessary to make these influences explicit for their embedding in architectural design education of young professionals. This can be achieved by transferring the resulting knowledge to a knowledge model by using intelligent modelling techniques. The operational aspects of design analogies to be implemented in education, research and the daily practice of designing architects need attention. This paper discusses the operational aspects of cultural analogy in design by using an intelligent computational modelling approach.
keywords	Architecture, Local values, Globalisation, Computer Aided Architectural Design, ICKT, Architectural Design, Analogy, Culture, Design Education, Multiculturalism, Intelligent Modelling Techniques
series	AVOCAAD
email
last changed	2006/01/16 21:38

For more results click below: