Cumincad : CUMINCAD Papers : Search Results

CumInCAD is a Cumulative Index about publications in Computer Aided Architectural Design
supported by the sibling associations ACADIA, CAADRIA, eCAADe, SIGraDi, ASCAAD and CAAD futures

PDF papers
References

Hits 1 to 20 of 395

Reformat results as: short short into frame detailed detailed into frame

_id	sigradi2006_e131c
id	sigradi2006_e131c
authors	Ataman, Osman
year	2006
title	Toward New Wall Systems: Lighter, Stronger, Versatile
source	SIGraDi 2006 - [Proceedings of the 10th Iberoamerican Congress of Digital Graphics] Santiago de Chile - Chile 21-23 November 2006, pp. 248-253
summary	Recent developments in digital technologies and smart materials have created new opportunities and are suggesting significant changes in the way we design and build architecture. Traditionally, however, there has always been a gap between the new technologies and their applications into other areas. Even though, most technological innovations hold the promise to transform the building industry and the architecture within, and although, there have been some limited attempts in this area recently; to date architecture has failed to utilize the vast amount of accumulated technological knowledge and innovations to significantly transform the industry. Consequently, the applications of new technologies to architecture remain remote and inadequate. One of the main reasons of this problem is economical. Architecture is still seen and operated as a sub-service to the Construction industry and it does not seem to be feasible to apply recent innovations in Building Technology area. Another reason lies at the heart of architectural education. Architectural education does not follow technological innovations (Watson 1997), and that “design and technology issues are trivialized by their segregation from one another” (Fernandez 2004). The final reason is practicality and this one is partially related to the previous reasons. The history of architecture is full of visions for revolutionizing building technology, ideas that failed to achieve commercial practicality. Although, there have been some adaptations in this area recently, the improvements in architecture reflect only incremental progress, not the significant discoveries needed to transform the industry. However, architectural innovations and movements have often been generated by the advances of building materials, such as the impact of steel in the last and reinforced concrete in this century. There have been some scattered attempts of the creation of new materials and systems but currently they are mainly used for limited remote applications and mostly for aesthetic purposes. We believe a new architectural material class is needed which will merge digital and material technologies, embedded in architectural spaces and play a significant role in the way we use and experience architecture. As a principle element of architecture, technology has allowed for the wall to become an increasingly dynamic component of the built environment. The traditional connotations and objectives related to the wall are being redefined: static becomes fluid, opaque becomes transparent, barrier becomes filter and boundary becomes borderless. Combining smart materials, intelligent systems, engineering, and art can create a component that does not just support and define but significantly enhances the architectural space. This paper presents an ongoing research project about the development of new class of architectural wall system by incorporating distributed sensors and macroelectronics directly into the building environment. This type of composite, which is a representative example of an even broader class of smart architectural material, has the potential to change the design and function of an architectural structure or living environment. As of today, this kind of composite does not exist. Once completed, this will be the first technology on its own. We believe this study will lay the fundamental groundwork for a new paradigm in surface engineering that may be of considerable significance in architecture, building and construction industry, and materials science.
keywords	Digital; Material; Wall; Electronics
series	SIGRADI
email
last changed	2016/03/10 09:47

_id	ddss2004_ra-177
id	ddss2004_ra-177
authors	Ballas, D., R. Kingston, and J. Stillwell
year	2004
title	Using a Spatial Microsimulation Decision Support System for Policy Scenario Analysis
source	Van Leeuwen, J.P. and H.J.P. Timmermans (eds.) Recent Advances in Design & Decision Support Systems in Architecture and Urban Planning, Dordrecht: Kluwer Academic Publishers, ISBN: 1-4020-2408-8, p. 177-191
summary	This paper discusses the potential of a spatial microsimulation-based decision support system for policy analysis. The system can be used to describe current conditions and issues in neighbourhoods, predict future trends in the composition and health of neighbourhoods and conduct modelling and predictive analysis to measure the likely impact of policy interventions at the local level. A large dynamic spatial micro-simulation model is being constructed for the population of Leeds (approximately 715,000 individuals) based on spatial microsimulation techniques in conjunction with a range of data, including 2001 Census data for Output Areas and sample data from the British Household Panel Survey. The project has three main aims as follows: (i) to develop a static microsimulation model to describe current conditions in Leeds; (ii) to enable the performance of ‘What if?’ analysis on a range of policy scenarios; and (iii) to develop a dynamic microsimulation model to predict future conditions in Leeds under different policy scenarios. The paper reports progress in meeting the above aims and outlines the associated difficulties and data issues. One of the significant advantages of the spatial microsimulation approach adopted by this project is that it enables the user to query any combination of variables that is deemed desirable for policy analysis. The paper will illustrate the software tool being developed in the context of this project that is capable of carrying out queries of this type and of mapping their results. The decision support tool is being developed to support policy-makers concerned with urban regeneration and neighbourhood renewal.
keywords	Spatial Microsimulation, Spatial Decision Support Systems, Geotools
series	DDSS
last changed	2004/07/03 22:13

_id	ddss2004_d-127
id	ddss2004_d-127
authors	Dijkstra, J., H.J.P. Timmermans, and B. de Vries
year	2004
title	Data Requirements for the Amanda Model System
source	Van Leeuwen, J.P. and H.J.P. Timmermans (eds.) Developments in Design & Decision Support Systems in Architecture and Urban Planning, Eindhoven: Eindhoven University of Technology, ISBN 90-6814-1554, p. 127-139
summary	The Amanda model system uses a multi-agent approach in an attempt to simulate pedestrian dynamic destination and route choice. Data collecting efforts are needed to calibrate the model. This paper discusses these data requirements.
keywords	Multi-Agent Systems, Activity Modelling, Pedestrian Behaviour
series	DDSS
last changed	2004/07/03 22:13

_id	1366
id	1366
authors	Heylighen, Ann; Neuckermans, Herman; Casaer, Mathias
year	2004
title	ICT REVISITED - FROM INFORMATION & COMMUNICATION TO INTEGRATING CURRICULA?
source	ITcon Vol. 9, Special Issue Digital Media Libraries, pg. 101-120, [ISSN 1400-6529]
summary	The paper presents a longitudinal study on the iterative implementation and testing of a support tool for precedent-based design. DYNAMO—Dynamic Architectural Memory On-line—was originally conceived as an interactive workhouse to stimulate and support student and professional architects in learning from previous design experience as encapsulated by concrete design projects. Five years after its baptism of fire, the paper looks back on how DYNAMO’s role has gradually evolved from an information and communication platform to an instrument for improving curriculum integration through a process of cumulative knowledge development. After briefly recalling the underlying ideas of DYNAMO and their stepwise implementation as an operational platform, a series of case studies documents how the platform has been brought into action in different contexts—within, across and beyond architecture schools. Besides valuable feedback on DYNAMO’s prototype, these case studies have generated more general insights regarding design and design tool support, which largely transcend the platform as such.
keywords	architecture, ICT, design support, digital media libraries
series	other
type	normal paper
email
more	http://www.itcon.org/2004/7
last changed	2005/01/26 22:46

_id	ddss2004_d-225
id	ddss2004_d-225
authors	Lai, I.-C.
year	2004
title	Dynamic Linkages between Ideas and Cases
source	Van Leeuwen, J.P. and H.J.P. Timmermans (eds.) Developments in Design & Decision Support Systems in Architecture and Urban Planning, Eindhoven: Eindhoven University of Technology, ISBN 90-6814-155-4, p. 225-238
summary	This research makes use of a cognitive study to explore a mechanism for associating ideas in a brainstorming session. Firstly, we propose a linking model integrating three principles of idea association (similarity, contrast and contiguity) with two processes of case-based reasoning (retrieval and adaptation). For identifying the types and mechanisms of linkages within the linking model, a design experiment and its protocol analysis was conducted. Finally, a framework for case-based reasoning to support idea association called Dynamic Idea-Maps (DIM) is proposed, and its components and mechanisms are elucidated.
keywords	Idea Association, Case-Based Reasoning, Retrieval, Adaptation, Protocol Analysis
series	DDSS
last changed	2004/07/03 22:13

_id	ascaad2004_paper13
id	ascaad2004_paper13
authors	Mandour, Mohamed Alaa
year	2004
title	From “Hard Architecture” to “Soft Architecture”: Architecture Form in the 21st Century
source	eDesign in Architecture: ASCAAD's First International Conference on Computer Aided Architectural Design, 7-9 December 2004, KFUPM, Saudi Arabia
summary	The digital revolution is affecting not only the way we produce drawings, but also the way we think about architecture. Such expressionistic, neo-baroque forms would have been unthinkable without higher technology, which allows for customization at a massive scale. Three dimensional computation extends the architect's range, permitting a wealth of experimentation, any form seems possible, the architecture language, the vocabulary changed, and the way design thinking has various dimensions. Within a short space of time the computer has become a widely accepted feature of architecture, both in the design process and in the everyday operation of buildings, and we are constantly aware that the computer's introductions into architecture will eventually have farreaching consequences. After all, the current revolution is not just about the computer as a tool but about its role and effect on the form of architecture and thinking This paper will discuss what form will architecture take in the next years? Will every future problem be anticipated, developing more efficient solutions? Will projects reflect meaningful architecture, for dynamic and contemplative environments and for aesthetic quality? And, how we will stand this unavoidable futurism?
series	ASCAAD
email
last changed	2007/04/08 19:47

_id	sigradi2004_195
id	sigradi2004_195
authors	Marcelo Iserhardt Ritzel; Gabriel Fontanet Nadal
year	2004
title	Uso de inteligencia artificial en las interacciones a partir de las representaciones gráficas en las interfaces [Using Artificial Intelligence in interactions based on interface graphic representations]
source	SIGraDi 2004 - [Proceedings of the 8th Iberoamerican Congress of Digital Graphics] Porte Alegre - Brasil 10-12 november 2004
summary	The agent's modelling, starting from the conception of Systems Intelligent Tutors (SIT), it is shown, in several application areas, an interesting and solid solution to the development of environments that they are more adapted your users, as well as to growing evolution of the Technologies of Information and Communication (TIC). The use of the agents. technology in projects of SIT propitiates the exploration of the domain in a more dynamic way, allowing your more complex representation with smaller cost of the computation and using more representative interfaces in the than he refers to the movements of elements (objects) and your interrelations, as in the case of simulations of phenomena physical, chemical and biological.
keywords	Systems Intelligent Tutors, Interface, Artificial Intelligence, Graphics Representations
series	SIGRADI
email
last changed	2016/03/10 09:55

_id	sigradi2004_393
id	sigradi2004_393
authors	Mauro Chiarella
year	2004
title	Superficies paramétricas y arquitectura: Conceptos, ideación y desarrollo [Parametric Surfaces and Architecture: Concepts, Ideation and Development]
source	SIGraDi 2004 - [Proceedings of the 8th Iberoamerican Congress of Digital Graphics] Porte Alegre - Brasil 10-12 november 2004
summary	By incorporating parametric surfaces and spline entities into the shape modeling computer systems, new design and production graphic tools have been created in the conceptual and poetic field of architecture; thus allowing an intuitive approach to the fast production of complex shapes with a minimum amount of data and specific knowledge. The analogous production systems (constrained by the material resources and constructive procedures present in the local existing technologies) are challenged by design and virtual simulation systems, suggesting new relationships between the architectural features and their representation: the creation of a symbolic and dynamic information space where the representation affects the identity of what is being represented. Taking into account this current challenge mentioned above, we have decided to work in the mixture, without reciprocal exclusions or substitutions, proposing some work alternatives to approach the issue under discussion in the Architecture Workshop.
keywords	Design, Geometry, NURBS, Unfolding, Pedagogy
series	SIGRADI
email
last changed	2016/03/10 09:55

_id	ddss2004_d-33
id	ddss2004_d-33
authors	Pelizaro, C., T.A. Arentze, and H.J.P. Timmermans
year	2004
title	A Spatial Decision Support System for Provision and Monitoring of Urban Green Space
source	Van Leeuwen, J.P. and H.J.P. Timmermans (eds.) Developments in Design & Decision Support Systems in Architecture and Urban Planning, Eindhoven: Eindhoven University of Technology, ISBN 90-6814-155-4, p. 33-48
summary	A spatial decision support system for the planning, design and maintenance of urban green space is presented. The objective of the system under development is to assist local authorities and green space administrators to strategically enhance the supply of urban greening with the right type and variety of green space that maximizes public welfare. The system is being developed starting from a modelling perspective and GIS functionalities are added conform the needed analysis and subroutines within the system. The system has been written in the C++ Borland Builder 5 programming environment. GIS capabilities and dynamic mapping are added using MapObjects 2.0.
keywords	Design & Decision Support Systems, Integrated Urban Models, Urban Planning, Urban Green Space
series	DDSS
last changed	2004/07/03 22:13

_id	ddss2004_d-49
id	ddss2004_d-49
authors	Polidori, M. and R. Krafta
year	2004
title	Environment – Urban Interface within Urban Growth
source	Van Leeuwen, J.P. and H.J.P. Timmermans (eds.) Developments in Design & Decision Support Systems in Architecture and Urban Planning, Eindhoven: Eindhoven University of Technology, ISBN 90-6814-155-4, p. 49-62
summary	This work presents the synthesis of a model of urban growth dedicated to accomplish simulations of urban spatial dynamics, based on integrated urban and environmental factors and promoting simultaneity among external and internal growth. The city and surrounding environment are captured and modeled in computational ambient, by application of the centrality / potential model (Krafta, 1994 and 1999), with support of graph theory, cellular automata, GIS and geocomputation. The model assumes the city as a field of opportunities for obtaining income, mediated by the space, which is composed of urban and environmental attributes, that work as attractors or as resistances for the urban growth. The space configuration and the distribution of those attributes generate tensions that differentiate qualitatively and quantitatively the space, through the centrality measure (built with the support of graphs techniques), coming to provoke growth in places with larger potential of development (built with the help of techniques of CA – cellular automata). Growths above environmental thresholds are considered problems, generated and overcome in the same process of production of the urban space. Iterations of that process offer a dynamic behaviour to the model, allowing to observe the growth process along the time. The model presents several possibilities: a) urban - natural environment integration; b) internal and external growth integration; c) variety in the scale; d) GIS integration and geocomputation; e) user interface; f) calibration; g) theoretical possibilities; and h) practical possibilities.
keywords	Environment, Urban Growth, Urban Morphology, Simulation
series	DDSS
last changed	2004/07/03 22:13

_id	ddss2004_d-141
id	ddss2004_d-141
authors	Tabak, V., B. de Vries, and J. Dijkstra
year	2004
title	User Behaviour Modelling
source	Van Leeuwen, J.P. and H.J.P. Timmermans (eds.) Developments in Design & Decision Support Systems in Architecture and Urban Planning, Eindhoven: Eindhoven University of Technology, ISBN 90-6814-155-4, p. 141-156
summary	The aim of the proposed project is to develop methods for the simulation of space utilisation. Up to now no methods for building performance evaluation are available which involve the occupants of the building. Instead, assumptions are made about people’s movement through space and their responses to the environment. These assumptions are input for important design decisions (e.g. capacity of elevators, width of corridors, escape routing) sophisticated calculations (e.g. cooling and lighting calculations) and simulations (e.g. airflow simulation, evacuation simulation). Reliable data on human movement are very scarce and can be valuable input to research in other research areas. New computer technologies allow for dynamic simulations that will provide insight into the building to be built. The research project builds upon existing methods that need to be tailored and/or extended to apply them to the building domain and to support real-time simulation.
keywords	Building Simulation, Decision Support Systems, User Behaviour, Petri-nets, Activity Based Modelling
series	DDSS
last changed	2004/07/03 22:13

_id	2004_553
id	2004_553
authors	Wojtowicz, J., Shakarchi, A. and Takeyama, M.
year	2004
title	dWall – Case of VDS Baghdad
doi	https://doi.org/10.52842/conf.ecaade.2004.553
source	Architecture in the Network Society [22nd eCAADe Conference Proceedings / ISBN 0-9541183-2-4] Copenhagen (Denmark) 15-18 September 2004, pp. 553-557
summary	Virtual Design Studio students and teachers of architecture in Canada, Japan and United Arab Emirates worked on the central area of University of Baghdad and examined its main square by proposing designs ideas and projects while sharing dynamic web portal. The narrative aspect of the digital media redefines the nature of design practice by making the creative process more democratic and transparent. Communicating design progress across temporal and geographic borders we can publish it instantly and make design accessible at different stages of its development for the benefit of distant collaborators, as well as general public. Baghdad remains site of traumatic conflict. Approaching aftermath of this war, creates unique opportunity to challenge the role of students of design. Among issues raised by this studio were: While apart - we will share and design for the betterment of the future condition of man people. We will consider not only possible futures, but also importance of the tradition while constructing our proposals in hope for both peace and democracy. However, the ongoing Globalization patterns are subject to the growing reassessment by many. What is the role of the central square in the campus of University of Baghdad in the XXI century? How can architecture and new media contribute to the peace making under such a circumstance as Iraq is facing at present? These were fundamental questions that the students needed to deal with. This paper presents the dynamic collaborative environment as well as diverse Digital Democracy Wall projects formulated in this distributed situation.
keywords	Virtual Design Studio; VDS; Baghdad; Architecture; Democracy
series	eCAADe
last changed	2022/06/07 07:57

_id	2004_142
id	2004_142
authors	Achten, Henri, Jessurun, Joran and de Vries, Bauke
year	2004
title	The Desk-Cave - A Low-Cost Versatile Virtual Reality Design and Research Setup Between Desktop and CAVE
doi	https://doi.org/10.52842/conf.ecaade.2004.142
source	Architecture in the Network Society [22nd eCAADe Conference Proceedings / ISBN 0-9541183-2-4] Copenhagen (Denmark) 15-18 September 2004, pp. 142-147
summary	Virtual Reality has become an almost ubiquitous technology in many applications, but it has seen limited success in design support. Reasons for this seem to lie in lack of easily available tools, high threshold for non-programmers, and high cost of equipment. In this paper we describe a Virtual Reality environment that is developed at Design Systems called the Desk-Cave. The Desk-Cave is a low-cost VR setup that combines principles of a CAVE system with a work desk. Architecture students with no specific training in VR technology use the Desk-Cave in design projects both in the early stage and the final presentation stage. The system allows quick transfer to the Desk-Cave and architectural evaluation of design proposals.
keywords	Virtual Reality, Architectural Design, Design Process, Cel Shading
series	eCAADe
email
last changed	2022/06/07 07:54

_id	acadia04_088
id	acadia04_088
authors	Bechthold, Martin
year	2004
title	Digital Design and Fabrication of Surface Structures
doi	https://doi.org/10.52842/conf.acadia.2004.088
source	Fabrication: Examining the Digital Practice of Architecture [Proceedings of the 23rd Annual Conference of the Association for Computer Aidd Design in Architecture and the 2004 Conference of the AIA Technology in Architectural Practice Knowledge Community / ISBN 0-9696665-2-7] Cambridge (Ontario) 8-14 November, 2004, 88-99
summary	This paper presents a study in digital design and manufacturing of shells, which are material-efficient systems that generate their load-bearing capacity through curvature. Their complex shapes are challenging to build, and the few current shell projects employ the same shape repetitively in order to reduce the cost of concrete formwork. Can digital design and manufacturing technology make these systems suitable for the needs of the 21st century? The research developed new digitally-driven fabrication processes for Wood-Foam Sandwich Shells and Ferrocement-Concrete Sandwich Shells. These are partially pre-fabricated in order to allow for the application of Computer-Numerically Controlled (CNC) technology. Sandwich systems offer advantages for the digitally-enabled construction of shells, while at the same time improving their structural and thermal performance. The research defines design and manufacturing processes that reduce the need for repetition in order to save costs. Wood-Foam Sandwich shells are made by laminating wood-strips over a CNC-milled foam mold that eventually becomes the structural sandwich core. For Ferrocement-Concrete sandwich shells, a two-stage process is presented: pre-fabricated ferrocement panels become the permanent formwork for a cast-in-place concrete shell. The design and engineering process is facilitated through the use of parametric solid modeling environments. Modeling macros and integrated Finite-Element Analysis tools streamline the design process. Accuracy in fabrication is maintained by using CNC techniques for the majority of the shaping processes. The digital design and manufacturing parameters for each process are verified through design and fabrication studies that include prototypes, mockups and physical scale models.
keywords	Shell, Pre-Fabrication, Prototype, Custom-Manufacturing, Simulation
series	ACADIA
email
last changed	2022/06/07 07:54

_id	ddss2004_d-193
id	ddss2004_d-193
authors	Burkhard, R.
year	2004
title	Visual Knowledge Transfer between Planners and Business Decision Makers
source	Van Leeuwen, J.P. and H.J.P. Timmermans (eds.) Developments in Design & Decision Support Systems in Architecture and Urban Planning, Eindhoven: Eindhoven University of Technology, ISBN 90-6814-155-4, p. 193-208
summary	The transfer of knowledge between planners and business decision makers can be improved when planners combine traditional visualizations with business knowledge visualizations. Today architects and urban planners use visualization methods such as sketches, diagrams, drawings, renderings, models and animations to illustrate their projects. While spending an enormous amount of time to illustrate a project, almost no time is used to illustrate business relevant information that decision makers need (i.e., revenue models, risks, return on investments, project phases). Consequences are information overload, misinterpretation or even misuse of information. Juxtaposing the visualizations that planners and decision makers use reveals a major gap: Both groups use different visualization types and are not familiar with the visualization types of each other. This paper stresses the importance to expand the visualization types of planners with business knowledge visualizations. First, it discusses the functioning of visual representations for the transfer of knowledge. Second, it introduces a general knowledge visualization framework. Third, it illustrates examples from an innovative office that improved knowledge transfer with decision makers in urban planning projects. We found that combining traditional visualizations with business knowledge visualizations reduces the information overload, prevents misinterpretation, increases the information quality, improves communication and as a consequence improves decision making. We found that decision makers pay extra for these visualization types, which therefore is a new source of income for planners. The results have implications for the education of future architects.
keywords	Decision Making, Knowledge Transfer, Visualization Types, Interfunctional Communication, Business Knowledge Visualization, Information Visualization
series	DDSS
last changed	2004/07/03 22:13

_id	ddss2004_d-21
id	ddss2004_d-21
authors	Fantini, F., U. Schiavoni, and B. Barboni
year	2004
title	Urban Planning as Project Management
source	Van Leeuwen, J.P. and H.J.P. Timmermans (eds.) Developments in Design & Decision Support Systems in Architecture and Urban Planning, Eindhoven: Eindhoven University of Technology, ISBN 90-6814-155-4, p. 21-32
summary	We consider program proposals as separate projects and use an incremental decision process (Incremental Functional Formulation) backed by methods of optimisation through incremental and interactive decision processes which have been developed in operations research. These methods fit the illstructured problems in planning better than the conventional optimisation methods. We'll conclude showing one of the possible concrete applications of our model to a real-life case, where one of the main results was a suggested expense of € 4 millions leading to the 90% of the result possible with the cost of € 10 millions (but with just a 40% expenditure).
keywords	Urban Planning, Models, Operations Research, Project Management
series	DDSS
last changed	2004/07/03 22:13

_id	sigradi2006_e028c
id	sigradi2006_e028c
authors	Griffith, Kenfield; Sass, Larry and Michaud, Dennis
year	2006
title	A strategy for complex-curved building design:Design structure with Bi-lateral contouring as integrally connected ribs
source	SIGraDi 2006 - [Proceedings of the 10th Iberoamerican Congress of Digital Graphics] Santiago de Chile - Chile 21-23 November 2006, pp. 465-469
summary	Shapes in designs created by architects such as Gehry Partners (Shelden, 2002), Foster and Partners, and Kohn Peterson and Fox rely on computational processes for rationalizing complex geometry for building construction. Rationalization is the reduction of a complete geometric shape into discrete components. Unfortunately, for many architects the rationalization is limited reducing solid models to surfaces or data on spread sheets for contractors to follow. Rationalized models produced by the firms listed above do not offer strategies for construction or digital fabrication. For the physical production of CAD description an alternative to the rationalized description is needed. This paper examines the coupling of digital rationalization and digital fabrication with physical mockups (Rich, 1989). Our aim is to explore complex relationships found in early and mid stage design phases when digital fabrication is used to produce design outcomes. Results of our investigation will aid architects and engineers in addressing the complications found in the translation of design models embedded with precision to constructible geometries. We present an algorithmically based approach to design rationalization that supports physical production as well as surface production of desktop models. Our approach is an alternative to conventional rapid prototyping that builds objects by assembly of laterally sliced contours from a solid model. We explored an improved product description for rapid manufacture as bilateral contouring for structure and panelling for strength (Kolarevic, 2003). Infrastructure typically found within aerospace, automotive, and shipbuilding industries, bilateral contouring is an organized matrix of horizontal and vertical interlocking ribs evenly distributed along a surface. These structures are monocoque and semi-monocoque assemblies composed of structural ribs and skinning attached by rivets and adhesives. Alternative, bi-lateral contouring discussed is an interlocking matrix of plywood strips having integral joinery for assembly. Unlike traditional methods of building representations through malleable materials for creating tangible objects (Friedman, 2002), this approach constructs with the implication for building life-size solutions. Three algorithms are presented as examples of rationalized design production with physical results. The first algorithm [Figure 1] deconstructs an initial 2D curved form into ribbed slices to be assembled through integral connections constructed as part of the rib solution. The second algorithm [Figure 2] deconstructs curved forms of greater complexity. The algorithm walks along the surface extracting surface information along horizontal and vertical axes saving surface information resulting in a ribbed structure of slight double curvature. The final algorithm [Figure 3] is expressed as plug-in software for Rhino that deconstructs a design to components for assembly as rib structures. The plug-in also translates geometries to a flatten position for 2D fabrication. The software demonstrates the full scope of the research exploration. Studies published by Dodgson argued that innovation technology (IvT) (Dodgson, Gann, Salter, 2004) helped in solving projects like the Guggenheim in Bilbao, the leaning Tower of Pisa in Italy, and the Millennium Bridge in London. Similarly, the method discussed in this paper will aid in solving physical production problems with complex building forms. References Bentley, P.J. (Ed.). Evolutionary Design by Computers. Morgan Kaufman Publishers Inc. San Francisco, CA, 1-73 Celani, G, (2004) “From simple to complex: using AutoCAD to build generative design systems” in: L. Caldas and J. Duarte (org.) Implementations issues in generative design systems. First Intl. Conference on Design Computing and Cognition, July 2004 Dodgson M, Gann D.M., Salter A, (2004), “Impact of Innovation Technology on Engineering Problem Solving: Lessons from High Profile Public Projects,” Industrial Dynamics, Innovation and Development, 2004 Dristas, (2004) “Design Operators.” Thesis. Massachusetts Institute of Technology, Cambridge, MA, 2004 Friedman, M, (2002), Gehry Talks: Architecture + Practice, Universe Publishing, New York, NY, 2002 Kolarevic, B, (2003), Architecture in the Digital Age: Design and Manufacturing, Spon Press, London, UK, 2003 Opas J, Bochnick H, Tuomi J, (1994), “Manufacturability Analysis as a Part of CAD/CAM Integration”, Intelligent Systems in Design and Manufacturing, 261-292 Rudolph S, Alber R, (2002), “An Evolutionary Approach to the Inverse Problem in Rule-Based Design Representations”, Artificial Intelligence in Design ’02, 329-350 Rich M, (1989), Digital Mockup, American Institute of Aeronautics and Astronautics, Reston, VA, 1989 Schön, D., The Reflective Practitioner: How Professional Think in Action. Basic Books. 1983 Shelden, D, (2003), “Digital Surface Representation and the Constructability of Gehry’s Architecture.” Diss. Massachusetts Institute of Technology, Cambridge, MA, 2003 Smithers T, Conkie A, Doheny J, Logan B, Millington K, (1989), “Design as Intelligent Behaviour: An AI in Design Thesis Programme”, Artificial Intelligence in Design, 293-334 Smithers T, (2002), “Synthesis in Designing”, Artificial Intelligence in Design ’02, 3-24 Stiny, G, (1977), “Ice-ray: a note on the generation of Chinese lattice designs” Environmental and Planning B, volume 4, pp. 89-98
keywords	Digital fabrication; bilateral contouring; integral connection; complex-curve
series	SIGRADI
email
last changed	2016/03/10 09:52

_id	3b25
id	3b25
authors	Kepczynska-Walczak, Anetta
year	2004
title	A model proposal for digitisation and recording data on architectural heritage in Poland based on European guidelines and best practices.
source	University of Strathclyde, Dept. of Architecture and Building Science, Glasgow UK
summary	The aim of the research is an adoption of digital technology in the recording and management of architectural heritage of Poland. The current documentation practice does not fit to the present needs. The existing system of built heritage recording and protection in Poland was developed during the 1960s and the 1970s. It is based on a database of paper fiches. Although the documenting template allows the collection of comprehensive information on historic buildings, the whole system of heritage protection remains petrified. The database verification and upgrade is usually delayed, and moreover, the records do not include some information crucial for successful protection and regeneration of historical buildings. The lack of computer aided documentation system causes, furthermore, inadequate management of the heritage. Central to the research methodology is the belief that a computer aided documentation system for built heritage in Poland should be compatible and harmonised with similar European projects as a response to the needs of the emerging Information Society. To achieve that standards and best practices in Europe were identified, analysed and compared with the current Polish system of heritage protection and management. Activities of Scottish organisations from the cultural heritage sector, being in the forefront of European achievements, were studied in detail. It was observed that Scottish advancements might be a source of valuable lessons and guidelines for similar activities in Poland. The issues crucial to designing a framework model for digitisation and recording data on architectural heritage in Poland were given particular attention. These included aspects related to content, technology, legislation, and project organisation. As a result a number of recommendations were formulated and supported with necessary tables and diagrams. This specification is intended as a starting point for implementation of digital technology in recording and management of architectural heritage of Poland. It is believed that the research outcomes may become useful not only for the architectural heritage documentation and management, but also in the wider cultural heritage sector in Poland. The thesis concludes with a statement that the validity of any guidelines related to the digital technology has a limited lifespan, and therefore the proposed model for digitisation and recording data on architectural heritage in Poland, to be successful, requires constant, diligent review of the technology development.
keywords	ICT, architectural heritage, database systems
series	thesis:PhD
type	normal paper
email
last changed	2006/10/31 12:32

_id	ddss2004_d-209
id	ddss2004_d-209
authors	Lindekens, J. and A. Heylighen
year	2004
title	Re-Using Re-Design Knowledge
source	Van Leeuwen, J.P. and H.J.P. Timmermans (eds.) Developments in Design & Decision Support Systems in Architecture and Urban Planning, Eindhoven: Eindhoven University of Technology, ISBN 90-6814-155-4, p. 209-224
summary	Addressing the issue of building re-use, this paper reports on the development of a re-design tool, which aims at helping students and novices (and even experienced architects) in understanding design decisions that have steered existing re-design projects. Furthermore the tool tries to support designers in using this understanding in their own design projects. The paper starts by situating the re-design tool within the overall research setup, and continues by motivating the observations that have led to developing this tool. The core of the paper describes the re-design tool itself and illustrates it with a concrete example. Finally, the tool is framed within the wider context of (architectural) design research, so as to explore where the tool accords or collides with generally accepted design theories.
keywords	Design Process, Design Method, Design Strategy, Re-Design, Design Tool
series	DDSS
last changed	2004/07/03 22:13

_id	2004_480
id	2004_480
authors	Mark, Earl
year	2004
title	Inter-related Scaled Models of the Built and Natural Environment: Merging CAD with Satellite Image Viewing
doi	https://doi.org/10.52842/conf.ecaade.2004.480
source	Architecture in the Network Society [22nd eCAADe Conference Proceedings / ISBN 0-9541183-2-4] Copenhagen (Denmark) 15-18 September 2004, pp. 480-488
summary	By inter-relating CAD and satellite image earth-viewing tools at building specific, city-wide and larger global scales, a wider framework of observation yields insight into the connectedness between built environments and tracking influences between them. The technologies for visualization and analysis at distinct scales are moving towards greater integration. This project demonstrates integration through three case studies, each at a different scale of application, and considers performance issues and implications for more general use. More specifically, CAD, GIS and now Satellite Image Based Earth Viewing systems all have found separate application within Architecture, Urban Planning and Strategic Regional Analysis This paper reports on an effort to test the tighter coupling of these systems on three projects, each at a different scale: (1) urban and regional scale, (2) continental scale, and (3) hemispheric analysis scale.
keywords	CAD, Earth Viewer, Digital Terrain Model, Comprehensive Plan, Architectural Review Board, Computer Animation
series	eCAADe
email
last changed	2022/06/07 07:59

For more results click below: