Cumincad : CUMINCAD Papers : Search Results

CumInCAD is a Cumulative Index about publications in Computer Aided Architectural Design
supported by the sibling associations ACADIA, CAADRIA, eCAADe, SIGraDi, ASCAAD and CAAD futures

PDF papers
References

Hits 1 to 20 of 564

Reformat results as: short short into frame detailed detailed into frame

_id	ascaad2004_paper3
id	ascaad2004_paper3
authors	Pratini, Edison
year	2004
title	Modeling with Gestures: Sketching 3D Virtual Surfaces and Objects Using Hands Formation and Movements
source	eDesign in Architecture: ASCAAD's First International Conference on Computer Aided Architectural Design, 7-9 December 2004, KFUPM, Saudi Arabia
summary	The 3D SketchMaker project has developed two prototypes for a gestural 3D sketching system to be used in the earliest phases of the design process. The goal of this ongoing research is to provide architects, and other designers involved in object conception, with a 3D gestural instrument that takes advantage of new virtual reality resources and is more natural than using the mouse, less difficult than learning complex software and less abstract than manipulating 2D entities on orthogonal projections. The system was conceived to assist or replace the first 2D drawing steps in the design process, generating rough 3D sketches that can be refined later using any 3D package. It is, in essence, a 3D modelling system directed to do sketching with hand movements and gestures in a virtual reality environment.
series	ASCAAD
email
last changed	2007/04/08 19:47

_id	2004_366
id	2004_366
authors	García Alvarado, Rodrigo and Monedero Isorna, Javier
year	2004
title	The Fragmented Eye - Cinematographic Techniques for Architectural Animations
doi	https://doi.org/10.52842/conf.ecaade.2004.366
source	Architecture in the Network Society [22nd eCAADe Conference Proceedings / ISBN 0-9541183-2-4] Copenhagen (Denmark) 15-18 September 2004, pp. 366-373
summary	In order to contribute to the elaboration of more expressive architectural animations, some famous films, documentaries of buildings and award-winning animations were analyzed. This was carried out examining the cinematographic techniques used at three levels of filming language; image setting, shot movements and montage, according to concepts described in theoretical texts. The analysis revealed an extensive use of techniques, in particular in movies, that give graphic diversity and perceptual stability. Based on that, it proposes some ideas for the planning of an architectural animation and a computer implementation of some filmic concepts, in particular related to movements of the point-of-view. This study suggest a fragmented view of building designs, to get an appealing moving presentation, with visual interest and continuity, as such should be also in architecture.
keywords	Animation, Film, Image, Movement, Montage
series	eCAADe
last changed	2022/06/07 07:50

_id	ddss2004_d-111
id	ddss2004_d-111
authors	Kitazawa, K. and M. Batty
year	2004
title	Pedestrian Behaviour Modelling
source	Van Leeuwen, J.P. and H.J.P. Timmermans (eds.) Developments in Design & Decision Support Systems in Architecture and Urban Planning, Eindhoven: Eindhoven University of Technology, ISBN 90-6814-155-4, p. 111-126
summary	This paper introduces a study of pedestrian behaviour modelling which incorporates ideas about agent-based systems and the traffic models based on the utility-maximization theory. The aim of this study is to examine the applicable scope of one of the basic assumptions in existing spatial behaviour models; the route with shortest distance maximizes the utility of each pedestrian’s travel. Although shortest-path models have been widely used in the field of Traffic management to predict routing behaviour, there can be seen a lot of erratic behaviour in urban areas, shopping migration behaviour for instance, which can not be explained by them. Thus, it is important to identify other possible influential factors on their utility maximization process in order to develop more explicable models of pedestrian movements. In this study, we implemented a simulation model using the shortest-path model as one of evaluation criteria of Genetic Algorithms (GA) to computationally emulate retail movements of shoppers in a big shopping centre and to test the accuracy of the model by comparison between the routes estimated by the model and actual trajectories of shoppers. This simulation system will be used as a platform for further modelling.
keywords	Pedestrian Modelling, Retail Movement, Shortest-Path, Genetic Algorithms
series	DDSS
last changed	2004/07/03 22:13

_id	ijac20032205
id	ijac20032205
authors	Yi-Luen Do, Ellen; Gross, Mark D.
year	2004
title	Let There be Light! Knowledge-Based 3-D Sketching Design Tools
source	International Journal of Architectural Computing vol. 2 - no. 2
summary	This paper presents a framework for 3D knowledgebasedsketching tools for lighting design and twosoftware prototypes built to illustrate sketch-basedinteraction with intelligent systems in 3-D domains.Spot supports direct sunlight simulation andvisualization in a selected time period and Light Pensupports placement of electric lighting designs to lightan intended area in space. In both examples, a 3-Dsketching front-end is coupled with a back-endknowledge-based system. This enables a designer topose a problem by drawing onto a 3-D model towhich the knowledge-based system offers a solution –in one case by providing quantitative data analysis; inthe other by modifying the 3-D model. Spot and LightPen’s specific domain of architectural lighting designexemplifies a more general class of 3-D interactionwith intelligent systems.
series	journal
email
more	http://www.multi-science.co.uk/ijac.htm
last changed	2007/03/04 07:08

_id	2004_142
id	2004_142
authors	Achten, Henri, Jessurun, Joran and de Vries, Bauke
year	2004
title	The Desk-Cave - A Low-Cost Versatile Virtual Reality Design and Research Setup Between Desktop and CAVE
doi	https://doi.org/10.52842/conf.ecaade.2004.142
source	Architecture in the Network Society [22nd eCAADe Conference Proceedings / ISBN 0-9541183-2-4] Copenhagen (Denmark) 15-18 September 2004, pp. 142-147
summary	Virtual Reality has become an almost ubiquitous technology in many applications, but it has seen limited success in design support. Reasons for this seem to lie in lack of easily available tools, high threshold for non-programmers, and high cost of equipment. In this paper we describe a Virtual Reality environment that is developed at Design Systems called the Desk-Cave. The Desk-Cave is a low-cost VR setup that combines principles of a CAVE system with a work desk. Architecture students with no specific training in VR technology use the Desk-Cave in design projects both in the early stage and the final presentation stage. The system allows quick transfer to the Desk-Cave and architectural evaluation of design proposals.
keywords	Virtual Reality, Architectural Design, Design Process, Cel Shading
series	eCAADe
email
last changed	2022/06/07 07:54

_id	avocaad_2003_05
id	avocaad_2003_05
authors	Alexander Koutamanis
year	2003
title	Autonomous mechanisms in architectural design systems
source	LOCAL VALUES in a NETWORKED DESIGN WORLD - ADDED VALUE OF COMPUTER AIDED ARCHITECTURAL DESIGN, Stellingwerff, Martijn and Verbeke, Johan (Eds.), (2004) DUP Science - Delft University Press, ISBN 90-407-2507-1.
summary	The development of architectural design systems that describe fully the form, structure and behaviour of a design relies heavily on the incorporation of intelligence in the representations, analyses, transformations and transactions used by the computer. Traditionally such intelligence takes either of two forms. The first is a methodical framework that guides actions supported by the design system (usually in a top-down fashion). The second is local, intelligence mechanisms that resolve discrete, relatively well-defined subproblems (often with limited if any user intervention). Local intelligent mechanisms offer the means for adaptability and transformability in architectural design systems, including the localization of global tendencies. This refers both to the digital design technologies and to the historical, cultural and contextual modifications of design styles and approaches.
keywords	Architecture, Local values, Globalisation, Computer Aided Architectural Design
series	AVOCAAD
email
last changed	2006/01/16 21:38

_id	acadia04_282
id	acadia04_282
authors	Anders, Peter
year	2004
title	Arch-OS: An Implementation of Cybrid Strategies
doi	https://doi.org/10.52842/conf.acadia.2004.282
source	Fabrication: Examining the Digital Practice of Architecture [Proceedings of the 23rd Annual Conference of the Association for Computer Aided Design in Architecture and the 2004 Conference of the AIA Technology in Architectural Practice Knowledge Community / ISBN 0-9696665-2-7] Cambridge (Ontario) 8-14 November, 2004, 282-293
summary	A review of the literature on Intelligent Buildings suggests an ideal of a building as an autonomous system that controls its internal and external environments. The model, whose origin lies with early models of artificial intelligence, effectively treats the building as a slave to human needs, and appears to invest more intelligence in the building than in its occupants. This paper proposes that automated environments be understood as extensions of human sense and awareness. It describes an operating system, Arch-OS, that exemplifies this approach by increasing building occupants’ consciousness of their environment.
keywords	Cybrid, Mixed Reality, Responsive Environment, Planetary Collegium
series	ACADIA
email
last changed	2022/06/07 07:54

_id	sigradi2006_e131c
id	sigradi2006_e131c
authors	Ataman, Osman
year	2006
title	Toward New Wall Systems: Lighter, Stronger, Versatile
source	SIGraDi 2006 - [Proceedings of the 10th Iberoamerican Congress of Digital Graphics] Santiago de Chile - Chile 21-23 November 2006, pp. 248-253
summary	Recent developments in digital technologies and smart materials have created new opportunities and are suggesting significant changes in the way we design and build architecture. Traditionally, however, there has always been a gap between the new technologies and their applications into other areas. Even though, most technological innovations hold the promise to transform the building industry and the architecture within, and although, there have been some limited attempts in this area recently; to date architecture has failed to utilize the vast amount of accumulated technological knowledge and innovations to significantly transform the industry. Consequently, the applications of new technologies to architecture remain remote and inadequate. One of the main reasons of this problem is economical. Architecture is still seen and operated as a sub-service to the Construction industry and it does not seem to be feasible to apply recent innovations in Building Technology area. Another reason lies at the heart of architectural education. Architectural education does not follow technological innovations (Watson 1997), and that “design and technology issues are trivialized by their segregation from one another” (Fernandez 2004). The final reason is practicality and this one is partially related to the previous reasons. The history of architecture is full of visions for revolutionizing building technology, ideas that failed to achieve commercial practicality. Although, there have been some adaptations in this area recently, the improvements in architecture reflect only incremental progress, not the significant discoveries needed to transform the industry. However, architectural innovations and movements have often been generated by the advances of building materials, such as the impact of steel in the last and reinforced concrete in this century. There have been some scattered attempts of the creation of new materials and systems but currently they are mainly used for limited remote applications and mostly for aesthetic purposes. We believe a new architectural material class is needed which will merge digital and material technologies, embedded in architectural spaces and play a significant role in the way we use and experience architecture. As a principle element of architecture, technology has allowed for the wall to become an increasingly dynamic component of the built environment. The traditional connotations and objectives related to the wall are being redefined: static becomes fluid, opaque becomes transparent, barrier becomes filter and boundary becomes borderless. Combining smart materials, intelligent systems, engineering, and art can create a component that does not just support and define but significantly enhances the architectural space. This paper presents an ongoing research project about the development of new class of architectural wall system by incorporating distributed sensors and macroelectronics directly into the building environment. This type of composite, which is a representative example of an even broader class of smart architectural material, has the potential to change the design and function of an architectural structure or living environment. As of today, this kind of composite does not exist. Once completed, this will be the first technology on its own. We believe this study will lay the fundamental groundwork for a new paradigm in surface engineering that may be of considerable significance in architecture, building and construction industry, and materials science.
keywords	Digital; Material; Wall; Electronics
series	SIGRADI
email
last changed	2016/03/10 09:47

_id	ddss2004_ra-177
id	ddss2004_ra-177
authors	Ballas, D., R. Kingston, and J. Stillwell
year	2004
title	Using a Spatial Microsimulation Decision Support System for Policy Scenario Analysis
source	Van Leeuwen, J.P. and H.J.P. Timmermans (eds.) Recent Advances in Design & Decision Support Systems in Architecture and Urban Planning, Dordrecht: Kluwer Academic Publishers, ISBN: 1-4020-2408-8, p. 177-191
summary	This paper discusses the potential of a spatial microsimulation-based decision support system for policy analysis. The system can be used to describe current conditions and issues in neighbourhoods, predict future trends in the composition and health of neighbourhoods and conduct modelling and predictive analysis to measure the likely impact of policy interventions at the local level. A large dynamic spatial micro-simulation model is being constructed for the population of Leeds (approximately 715,000 individuals) based on spatial microsimulation techniques in conjunction with a range of data, including 2001 Census data for Output Areas and sample data from the British Household Panel Survey. The project has three main aims as follows: (i) to develop a static microsimulation model to describe current conditions in Leeds; (ii) to enable the performance of ‘What if?’ analysis on a range of policy scenarios; and (iii) to develop a dynamic microsimulation model to predict future conditions in Leeds under different policy scenarios. The paper reports progress in meeting the above aims and outlines the associated difficulties and data issues. One of the significant advantages of the spatial microsimulation approach adopted by this project is that it enables the user to query any combination of variables that is deemed desirable for policy analysis. The paper will illustrate the software tool being developed in the context of this project that is capable of carrying out queries of this type and of mapping their results. The decision support tool is being developed to support policy-makers concerned with urban regeneration and neighbourhood renewal.
keywords	Spatial Microsimulation, Spatial Decision Support Systems, Geotools
series	DDSS
last changed	2004/07/03 22:13

_id	ddss2004_d-269
id	ddss2004_d-269
authors	Beetz, J., J. van Leeuwen, and B. de Vries
year	2004
title	Towards a Multi Agent System for the Support of Collaborative Design
source	Van Leeuwen, J.P. and H.J.P. Timmermans (eds.) Developments in Design & Decision Support Systems in Architecture and Urban Planning, Eindhoven: Eindhoven University of Technology, ISBN 90-6814-155-4, p. 269-280
summary	In this paper we are drafting the outline of a framework for a Multi Agent System (MAS) for the support of Collaborative Design in the architectural domain. The system we are proposing makes use of Machine Learning (ML) techniques to infer personalized knowledge from observing a users’ action in a generic working environment using standard tools such as CAD packages. We introduce and discuss possible strategies to combine Concept Modelling (CM)-based approaches using existing ontologies with statistical analysis of action sequences within a domain specific application. In a later step, Agent technologies will be used to gather additional related information from external resources such as examples of similar problems on the users hard disk, from corresponding work of team-members within an intranet or from advises of expert from different knowledge domains, themselves represented by agents. As users deny or reward resulting proposals offered by the agent(s) through an interface the system will be enhanced over time using methods like Reinforced Learning.
keywords	Multi Agent Systems, Design & Decision Support Systems, Collaborative Design, Human Computer Interfaces, Machine learning, Data Mining
series	DDSS
last changed	2004/07/03 22:13

_id	eaea2003_15-breen
id	eaea2003_15-breen
authors	Breen, J. and Giro, H.
year	2004
title	The DXI Experience. Ten Years of Design Visualization Developments in an Educational Laboratory Context
source	Spatial Simulation and Evaluation - New Tools in Architectural and Urban Design [Proceedings of the 6th European Architectural Endoscopy Association Conference / ISBN 80-227-2088-7], pp. 71-77
summary	Design visualisation is an essential aspect of virtually every form of design enquiry. The effects of potential environmental interventions may be simulated in order to gain the types of insights, which cannot be acquired easily from two-dimensional notations. Three-dimensional representations may be generated for very different reasons. The most direct form of design imaging is traditionally for the benefit of the designer him/herself, in order to test whether the working concepts offer fitting solutions to the complex array of design conditions such as context, programme and feasibility. Alternately, images may be generated for the benefit of communication, in order to offer insights into the expected workings of a particular proposal (possibly including alternatives). This may lead to greater understanding and possibly to reaching consensus amongst different ‘actors’ involved in the design and realisation process. In many cases the results of such visualisation studies contribute to ‘bridging the gap’ between the professionals and other parties involved more indirectly in design decision-making or the appraisal of the proposals. Designers can use distinctly different methods when going about such imaging procedures. Their choices for particular techniques may depend on their familiarity or the availability of certain media devices. Being confronted with new modelling and/or visualisation instruments can stimulate the interest in fresh approaches. In this respect, the design education environment can play an important role in not only teaching ‘proven’ applications to future designers, but also in creating a platform for the active development of innovative approaches to the design visualisation practices: education as a ‘laboratory’ for new insights and potentially a ‘breeding ground’ for the extension of the designer’s instrumentation. This contribution documents the experiences gained in some ten years within an educational application, involving active use of design driven media applications. The emphasis lies on the evolvement of techniques for eye-level imaging, whereby use can be made of different types of models: physical scale models as well as digital, virtual models. Changing attitudes towards dynamic and serial vision are considered, whereby storyboard approaches on the level of integral presentation are considered. By analysing a selection of cases and their underlying approaches an indication is given of the changing attitudes and combinations of multimedia techniques, which offer opportunities to design visualisation and communication.
series	EAEA
more	http://info.tuwien.ac.at/eaea
last changed	2005/09/09 10:43

_id	sigradi2004_357
id	sigradi2004_357
authors	Carlos Calderon and Nicholas Worley
year	2004
title	An automatic real-time camera control engine for the exploration of architectural designs
source	SIGraDi 2004 - [Proceedings of the 8th Iberoamerican Congress of Digital Graphics] Porte Alegre - Brasil 10-12 november 2004
summary	This paper is concerned with the use of real-time camera engines in architectural virtual environments as a method of enhancing the user.s experience and as a way of facilitating the understanding of architectural concepts. This paper reports on an initial prototype of a real-time cinematic control camera engine for dynamic virtual environments in the architectural domain. The paper discusses the potential of the system to convey architectural concepts using well known architectural concepts such as rhythm and proposes a series of future improvements to address those limitations. Keywords: virtual environments, camera control, design process, filmaking.
series	SIGRADI
email
last changed	2016/03/10 09:48

_id	2004_387
id	2004_387
authors	Cheng, Nancy
year	2004
title	Stroke Sequence in Digital Sketching
doi	https://doi.org/10.52842/conf.ecaade.2004.387
source	Architecture in the Network Society [22nd eCAADe Conference Proceedings / ISBN 0-9541183-2-4] Copenhagen (Denmark) 15-18 September 2004, pp. 387-393
summary	This paper explains how to use animated drawings created with a commercial portable pen to understand and teach design process. By recording and replaying pen strokes, the Logitech Io digital pen allows us to examine the drawing process. We have been using the pen to collect expert drawings, analyse the techniques and then teach drawing strategies. The software’s animation timeline engages viewers by giving narrative sequence to a drawing, revealing sub-steps of the design or drawing process for interactive examination and discussion. The timeline allows viewers to pull apart layers of information, revealing initial strokes of complicated drawings, separating overlaid corrections and facilitating stroke counting for protocol analysis. In the classroom, students can see a variety of expert drawing techniques, use the pen in class and then immediately compare animated versions of their own efforts and expert examples. The ease of collecting new examples makes it possible to widen the range of examples to unconventional techniques.
keywords	Drawing, Design Process And Media, Digital Design Tools, Teaching
series	eCAADe
type	normal paper
email
last changed	2022/06/07 07:55

_id	301caadria2004
id	301caadria2004
authors	Chia-Yu Wang, Teng-Wen Chang
year	2004
title	Information Sharing for Small Design Studios - Ubiquitous Information Flow Approaches
doi	https://doi.org/10.52842/conf.caadria.2004.391
source	CAADRIA 2004 [Proceedings of the 9th International Conference on Computer Aided Architectural Design Research in Asia / ISBN 89-7141-648-3] Seoul Korea 28-30 April 2004, pp. 391-404
summary	While balancing the feasibility of management as well as design quality, design offices with strong focus on design are getting smaller and more compact. Mobility and dynamic information flow are two key issues for information sharing in design studio. In this research, we discussions about these concepts of ubiquitous computing, workflow and information model on small design studio. The goal of this research is trying to use available digital equipments as a ubiquitous device for sharing information dynamically no matter where and when they are. Use such digital equipments as well as server to store information and improve human interaction to achieve better interaction between human and technology. For these issues, we analyze three components of our system—the types of information, the interactive behaviors using roles as a metaphor, and ubiquitous devices that are available for small design studio. Within this research, we propose a system call Ubiquitous Information Flow Tool (UIFO) based on Java and Web technology for testing and reifying the concepts of ubiquitous information flow.
series	CAADRIA
email
last changed	2022/06/07 07:55

_id	410caadria2004
id	410caadria2004
authors	Chiung-Hui Chen, Hui-Tin Lin, Mao-Lin Chiu
year	2004
title	A Scenario-Based Agent System for Digital City Interaction
doi	https://doi.org/10.52842/conf.caadria.2004.693
source	CAADRIA 2004 [Proceedings of the 9th International Conference on Computer Aided Architectural Design Research in Asia / ISBN 89-7141-648-3] Seoul Korea 28-30 April 2004, pp. 693-706
summary	Urban design involves coordination and communication for collecting consensus among citizens and developing the design strategy and spatial program. While these are web-based systems for representing the real world actions, there is lack of human interaction for receiving feedbacks during the process. Therefore, the purpose of this study is to introduce the agents into the participatory design process (PDP) based on scenarios. This paper has developed a webbased system prototype to demonstrate how the agent can interact with users and how the interface facilitates incremental design. We present a participatory design project in an old street to illustrate how the Scenario-Based Agent System (SBAS) model functions in a real application. Meanwhile, four issues will be discussed in regarding with building a learning interaction agent as an actor.
series	CAADRIA
email
last changed	2022/06/07 07:56

_id	disschoo
id	disschoo
authors	Choo, Seung Yeon
year	2004
title	STUDY ON COMPUTER-AIDED DESIGN SUPPORT OF TRADITIONAL ARCHITECTURAL THEORIES
source	Technische Universität München
summary	The research presented in this thesis describes a computer-aided design support of traditional architectural theories. Traditional architectural theories in western architecture have been considered as a basis for answering the fundamental questions of architecture: proportion, symmetry, colour, harmony and so on. In particular, the aesthetic aspect of these theories has been one of many important architectural aspects, and which is concerned with the field of architecture in determining the beauty of architectural form. The most significant role of the traditional theories in architecture is to maintain unity, to avoid chaos and then to achieve harmony in a design, using some specific design principles. However, current technology-guided constructions tend to neglect often the importance of these theories due to the standardization of building elements, due to mechanically-prepared construction and the reducing completion costs, etc. Thus, this research proposes a design support system as a design assistant that gives an intelligent advice on architectural design, using analytical design- and ordering- principles of traditional theories for the optimization of the architectural design from the aesthetic perspective. To evaluate the aesthetic quality of an architectural design, this system is implemented in the AutoCAD environment, using the AutoLISP. It is applied so as to explain and develop aesthetic qualities of a design. Designs proposed by this system include optimum designs, which are based on the traditional architectural theories, and new ones which can be in future connected to information models. To do this, the definition of information about building elements is accomplished by using the neutral format EXPRESS and EXPRESS-G for such application systems. The results of the application system are presented, such as the easily generating and quickly conceptualising of an object model, the checking of the aesthetic value of the design during the various design phases, the helping to find direction during rational searching for a solution. The user can easily appreciate the usefulness of the proposed system as a set of tools for searching for rational architectural aesthetics and formal solutions at different design-stages. It is to be hoped that a new "traditional" fundamental of architecture, such as the proposed system, incorporating CAAD systems, will find its place among new technological methods in the AEC industry and so help to bridge the gap between the value of traditional architecture and CAAD systems.
keywords	Aesthetics, Design Theory, Order Principle, Product Model, IFC, AutoCAD/AutoLISP
series	thesis:PhD
type	normal paper
email
more	http://tumb1.biblio.tu-muenchen.de/publ/diss/ar/2004/choo.html
last changed	2004/05/23 07:05

_id	512caadria2004
id	512caadria2004
authors	Chyi-Gang Kuo, Hsuan-Cheng Lin, Yang-Ting Shen, Tay-Sheng Jeng
year	2004
title	Mobile Augmented Reality for Spatial Information Exploration
doi	https://doi.org/10.52842/conf.caadria.2004.891
source	CAADRIA 2004 [Proceedings of the 9th International Conference on Computer Aided Architectural Design Research in Asia / ISBN 89-7141-648-3] Seoul Korea 28-30 April 2004, pp. 891-900
summary	In this paper, we present an augmented reality system that integrates real and virtual worlds for outdoor sustainable education in campus. We develop a mobile spatially-aware computational device as a visualization aid to students learning outdoors. We apply the mobile augmented reality technology to a newly constructed ecological garden in our campus. Users can virtually see the underlying water cycling system outdoors and map the virtual objects to physical reality through embodied interaction with the computational device. The objective is to make invisible information visible to users to extend interactions with our “living” environment. Keywords : Augmented Reality, Mixed Reality, Mobil Computing, Information Exploration.
series	CAADRIA
email
last changed	2022/06/07 07:56

_id	acadia04_150
id	acadia04_150
authors	Clarke, Cory
year	2004
title	The Siren's Call
doi	https://doi.org/10.52842/conf.acadia.2004.150
source	Fabrication: Examining the Digital Practice of Architecture [Proceedings of the 23rd Annual Conference of the Association for Computer Aided Design in Architecture and the 2004 Conference of the AIA Technology in Architectural Practice Knowledge Community / ISBN 0-9696665-2-7] Cambridge (Ontario) 8-14 November, 2004, 150-161
summary	This paper presents an account of our research and development of processes providing seamless transition from design to fabrication. The narrative of our design, development, and prototyping experi¬ments spans seven years, including our current project, the Trusset software/structural system. Trusset is a combined building system and agent-based software design tool. The building system is based on a differential space-truss designed for fabrication entirely with computer numerically controlled (CNC) linear cutting devices, such as laser cut¬ters or three-axis mills. The software component is a set of agent-based design tools for developing surfaces and envelopes formally suitable to be built using the space-truss structure. Developed in parallel, the soft¬ware and building components combine within the Trusset system to provide a seamless pipeline from design to fabrication and assembly. The story of the development of software components and structural system, leading to the Trusset, act as a means of discussing the larger issues framing the research: the potential pitfalls and benefits of design and fabrication integration via the computer.
keywords	Fabrication, Space-truss, Structure
series	ACADIA
email
last changed	2022/06/07 07:56

_id	ijac20032206
id	ijac20032206
authors	Cory Clarke; Phillip Anzalone
year	2004
title	Trusset: Parallel Development of Software and Construction Systems for Space-Truss Structures
source	International Journal of Architectural Computing vol. 2 - no. 2
summary	This paper documents our current progress on theparallel development of a building system andcorresponding agent-based software design tools;together the two produce a seamless pipeline fromdesign to fabrication and assembly. The building systemis a clad differential space-truss designed forfabrication entirely with computer numericallycontrolled (CNC) linear cutting devices such as CNClaser cutters or two-axis mills. The softwarecomponent is a set of agent-based design tools fordeveloping surfaces and envelopes formally suitable tobe built using our space-truss system.
series	journal
email
more	http://www.multi-science.co.uk/ijac.htm
last changed	2007/03/04 07:08

_id	20ff
id	20ff
authors	Derix, Christian
year	2004
title	Building a Synthetic Cognizer
source	Design Computation Cognition conference 2004, MIT
summary	Understanding ‘space’ as a structured and dynamic system can provide us with insight into the central concept in the architectural discourse that so far has proven to withstand theoretical framing (McLuhan 1964). The basis for this theoretical assumption is that space is not a void left by solid matter but instead an emergent quality of action and interaction between individuals and groups with a physical environment (Hillier 1996). In this way it can be described as a parallel distributed system, a self-organising entity. Extrapolating from Luhmann’s theory of social systems (Luhmann 1984), a spatial system is autonomous from its progenitors, people, but remains intangible to a human observer due to its abstract nature and therefore has to be analysed by computed entities, synthetic cognisers, with the capacity to perceive. This poster shows an attempt to use another complex system, a distributed connected algorithm based on Kohonen’s self-organising feature maps – SOM (Kohonen 1997), as a “perceptual aid” for creating geometric mappings of these spatial systems that will shed light on our understanding of space by not representing space through our usual mechanics but by constructing artificial spatial cognisers with abilities to make spatial representations of their own. This allows us to be shown novel representations that can help us to see new differences and similarities in spatial configurations.
keywords	architectural design, neural networks, cognition, representation
series	other
type	poster
email
more	http://www.springer.com/computer/ai/book/978-1-4020-2392-7
last changed	2012/09/17 21:13

For more results click below: