CumInCAD is a Cumulative Index about publications in Computer Aided Architectural Design
supported by the sibling associations ACADIA, CAADRIA, eCAADe, SIGraDi, ASCAAD and CAAD futures

PDF papers
References

Hits 1 to 20 of 572

_id ddss2004_d-283
id ddss2004_d-283
authors Van Bronswijk, J.E.M.H., L.G.H. Koren, and C.E.E. Pernot
year 2004
title Adapting Epidemiological Methodologies to the Prediction of Health Effects of Built Environment Interventions
source Van Leeuwen, J.P. and H.J.P. Timmermans (eds.) Developments in Design & Decision Support Systems in Architecture and Urban Planning, Eindhoven: Eindhoven University of Technology, ISBN 90-6814-155-4, p. 283-290
summary The influence of built environments on vitality and productivity of users is paramount. Since the introduction of Industrial, Flexible and Demountable Building, domotics, smart buildings, in general: mass-produced, intelligent and learning built environments, tailored built environments are within reach. This has resulted in the need for methodologies to predict short-term and long-term health effects of different built-environment constellations. Epidemiology has developed and validated methods to assess changes in prevalence of inflictions and other unhealthy conditions, as well as the number of healthy and vital years in a life span. After analysing the relationships among building (services) parts and its combinations, health determinants (exposures) and health outcomes, we could adapt the healthy years assessment (DALY) to changes in construction (insulation, air tightness) and building services engineering (ventilation, heating) for dwellings under Dutch conditions. The most important conclusion is that natural ventilation, mechanical ventilation and balanced ventilation not only differ in their average health effect, but even more so in the size of the ranges of these effects. Other systems, such as heat pumps or photo voltaic cells are expensive but will become economically applicable when healthcare costs are taken into account. These outcomes gave valuable clues for product innovation and opened the possibility to model health in relation to built environments. The method could also be applied to quality classification systems for dwellings.
keywords Health Prediction, Built Environment, Epidemiology, Modelling
series DDSS
last changed 2004/07/03 22:13

_id ddss2004_d-177
id ddss2004_d-177
authors Rafi, A., T. Hoai Nam, K. Jin Woo, and W. Lau
year 2004
title InnotiveBrowser
source Van Leeuwen, J.P. and H.J.P. Timmermans (eds.) Developments in Design & Decision Support Systems in Architecture and Urban Planning, Eindhoven: Eindhoven University of Technology, ISBN 90-6814-155-4, p. 177-191
summary This paper explains the results of a collaborative research project between Multimedia University (Malaysia) and Innotive Corporation (Korea) to manage, design a multimedia archiving system and visualising knowledge for the students or the users in the Faculty of Creative Multimedia, Multimedia University. This research introduces InnotiveBrowser technology, a high performance multimedia display software that enhances the ability of user to search and discover digital content. The unique result of this method is that the images to be viewed are not limited to available RAM, instead the content utilises the available storage directly from the disk (hard drives). In other words, the larger the size of the hard disk, the greater the number of content information can be stored and displayed. This system is employed with Virtual Reality (VR) techniques particularly imparting viewing technology (pixel-ondemand) and navigation strategy to increase the viewing speed of multimedia information in real-time over the Internet, broadband and even via PDA platforms. This research hopes to set the benchmark for multimedia archiving system that can be applied in other CAD, CAAD or most of the design or production-based teaching and learning environment. The early findings of this research have been patented and this paper will demonstrate the research ideas and explain how we implement and customise the technology and content development in the Faculty of Creative Multimedia, Multimedia University.
keywords InnotiveBrowser, Digital Asset Management, Multimedia Archiving, VR Technology
series DDSS
last changed 2004/07/03 22:13

_id ddss2004_d-269
id ddss2004_d-269
authors Beetz, J., J. van Leeuwen, and B. de Vries
year 2004
title Towards a Multi Agent System for the Support of Collaborative Design
source Van Leeuwen, J.P. and H.J.P. Timmermans (eds.) Developments in Design & Decision Support Systems in Architecture and Urban Planning, Eindhoven: Eindhoven University of Technology, ISBN 90-6814-155-4, p. 269-280
summary In this paper we are drafting the outline of a framework for a Multi Agent System (MAS) for the support of Collaborative Design in the architectural domain. The system we are proposing makes use of Machine Learning (ML) techniques to infer personalized knowledge from observing a users’ action in a generic working environment using standard tools such as CAD packages. We introduce and discuss possible strategies to combine Concept Modelling (CM)-based approaches using existing ontologies with statistical analysis of action sequences within a domain specific application. In a later step, Agent technologies will be used to gather additional related information from external resources such as examples of similar problems on the users hard disk, from corresponding work of team-members within an intranet or from advises of expert from different knowledge domains, themselves represented by agents. As users deny or reward resulting proposals offered by the agent(s) through an interface the system will be enhanced over time using methods like Reinforced Learning.
keywords Multi Agent Systems, Design & Decision Support Systems, Collaborative Design, Human Computer Interfaces, Machine learning, Data Mining
series DDSS
last changed 2004/07/03 22:13

_id 2004_530
id 2004_530
authors Breen, Jack
year 2004
title Changing Roles for (Multi)Media Tools in Design - Assessing Developments and Applications of (Multi)Media Techniques in Design Education, Practice and Research
source Architecture in the Network Society [22nd eCAADe Conference Proceedings / ISBN 0-9541183-2-4] Copenhagen (Denmark) 15-18 September 2004, pp. 530-539
doi https://doi.org/10.52842/conf.ecaade.2004.530
summary This contribution explores the continued evolvement of the instruments of design in relation to practice and education (and potentially: research) and attempts to characterize the effects brought about by recent media ‘shifts’. For this purpose a framework has been established to identify and ‘map’ relevant design media. The relationships between various ‘traditional’ media and computer based applications are scrutinized and characterized and the opportunities which they offer are compared. The underlying conceptual framework was recently put before a group of professionals in the in the course of an experimental workshop concerning the potentials of a virtual design media ‘museum’. In the following step an attempt is made to identify changing media roles, whereby the opportunities of the educational environment – as a ‘laboratory’ for emerging developments – is stressed. Some specific tendencies are identified, notably: the combined application of different sorts of design media; the surfacing of imaginative new working methods inspired by ‘classic’ media techniques and various new ways of escaping the serious limitations of traditional computer interfaces. These developments, making use of various types of computer platforms, may be expected to contribute to more structured – and imaginative – approaches to professional design as well as to architectural education and research.
keywords Computer Support For Learning; The Changing Role of the Design Studio; Educational Methodologies
series eCAADe
email j.l.h.breen@bk.tudelft.nl
last changed 2022/06/07 07:54

_id caadria2004_k-1
id caadria2004_k-1
authors Kalay, Yehuda E.
year 2004
title CONTEXTUALIZATION AND EMBODIMENT IN CYBERSPACE
source CAADRIA 2004 [Proceedings of the 9th International Conference on Computer Aided Architectural Design Research in Asia / ISBN 89-7141-648-3] Seoul Korea 28-30 April 2004, pp. 5-14
doi https://doi.org/10.52842/conf.caadria.2004.005
summary The introduction of VRML (Virtual Reality Markup Language) in 1994, and other similar web-enabled dynamic modeling software (such as SGI’s Open Inventor and WebSpace), have created a rush to develop on-line 3D virtual environments, with purposes ranging from art, to entertainment, to shopping, to culture and education. Some developers took their cues from the science fiction literature of Gibson (1984), Stephenson (1992), and others. Many were web-extensions to single-player video games. But most were created as a direct extension to our new-found ability to digitally model 3D spaces and to endow them with interactive control and pseudo-inhabitation. Surprisingly, this technologically-driven stampede paid little attention to the core principles of place-making and presence, derived from architecture and cognitive science, respectively: two principles that could and should inform the essence of the virtual place experience and help steer its development. Why are the principles of place-making and presence important for the development of virtual environments? Why not simply be content with our ability to create realistically-looking 3D worlds that we can visit remotely? What could we possibly learn about making these worlds better, had we understood the essence of place and presence? To answer these questions we cannot look at place-making (both physical and virtual) from a 3D space-making point of view alone, because places are not an end unto themselves. Rather, places must be considered a locus of contextualization and embodiment that ground human activities and give them meaning. In doing so, places acquire a meaning of their own, which facilitates, improves, and enriches many aspects of our lives. They provide us with a means to interpret the activities of others and to direct our own actions. Such meaning is comprised of the social and cultural conceptions and behaviors imprinted on the environment by the presence and activities of its inhabitants, who in turn, ‘read’ by them through their own corporeal embodiment of the same environment. This transactional relationship between the physical aspects of an environment, its social/cultural context, and our own embodiment of it, combine to create what is known as a sense of place: the psychological, physical, social, and cultural framework that helps us interpret the world around us, and directs our own behavior in it. In turn, it is our own (as well as others’) presence in that environment that gives it meaning, and shapes its social/cultural character. By understanding the essence of place-ness in general, and in cyberspace in particular, we can create virtual places that can better support Internet-based activities, and make them equal to, in some cases even better than their physical counterparts. One of the activities that stands to benefit most from understanding the concept of cyber-places is learning—an interpersonal activity that requires the co-presence of others (a teacher and/or fellow learners), who can point out the difference between what matters and what does not, and produce an emotional involvement that helps students learn. Thus, while many administrators and educators rush to develop webbased remote learning sites, to leverage the economic advantages of one-tomany learning modalities, these sites deprive learners of the contextualization and embodiment inherent in brick-and-mortar learning institutions, and which are needed to support the activity of learning. Can these qualities be achieved in virtual learning environments? If so, how? These are some of the questions this talk will try to answer by presenting a virtual place-making methodology and its experimental implementation, intended to create a sense of place through contextualization and embodiment in virtual learning environments.
series CAADRIA
type normal paper
last changed 2022/06/07 07:52

_id avocaad_2003_19
id avocaad_2003_19
authors Rudi Stouffs, Maia Engeli and Bige Tunçer
year 2003
title Mediated discourse as a form of architectonic intervention
source LOCAL VALUES in a NETWORKED DESIGN WORLD - ADDED VALUE OF COMPUTER AIDED ARCHITECTURAL DESIGN, Stellingwerff, Martijn and Verbeke, Johan (Eds.), (2004) DUP Science - Delft University Press, ISBN 90-407-2507-1.
summary We are currently exploring the concept of mediated discourse in relation to an architectonic intervention and urban transformation project in an educational project and elective course. Led by faculty and artists, students are offered the ability to experiment with various media in the design and development of a multidisciplinary discourse. A web-based elearning environment also allows the students’ activities to form part of a larger discourse that takes place among all participants, including the public. In this paper, we describe the concept of mediated discourse and the various dimensions we distinguish, we present the educational project and its various aspects and participants’ roles, we consider the internationalisation of this educational project in a future instance of the course, and we describe the characteristics of the web environment in the context of an educational and software development project for a multimedia learning environment to support group work and discourse.
keywords Architecture, Local values, Globalisation, Computer Aided Architectural Design
series AVOCAAD
email r.stouffs@bk.tudelft.nl
last changed 2006/01/16 21:38

_id 408caadria2004
id 408caadria2004
authors Kuhn Park, Ramesh Krishnamurti
year 2004
title Flexible Design Representation for Construction
source CAADRIA 2004 [Proceedings of the 9th International Conference on Computer Aided Architectural Design Research in Asia / ISBN 89-7141-648-3] Seoul Korea 28-30 April 2004, pp. 671-680
doi https://doi.org/10.52842/conf.caadria.2004.671
summary A high percentage of overall defects in the built environment occurs during the construction period. Some of these relate to design and the others relate to construction. The detection and reasoning of defects requires involvement of multiple expertise. Researchers in the School of Architecture, the Robotics Institute, and the Department of Civil and Environmental Engineering at Carnegie Mellon University are investing ways to integrate suites of emerging evaluation technologies to help find, record, manage, and limit the impact of construction defects. As part of this effort, the researchers have conducted case studies on construction sites near Pittsburgh, Pennsylvania. Each case study serves as a test-bed to measure the feasibility of our approach and to discover problems. In this paper, we discuss the overall project work flow in which we emphasize the importance of a flexible representation for construction, and describe our solution using a concept of representational flexibility named sorts.
series CAADRIA
email kuhnpark@cmu.edu
last changed 2022/06/07 07:52

_id ddss2004_ra-325
id ddss2004_ra-325
authors Rodrigues, D.S., L.C.L. Souza, and J.F.G. Mendes
year 2004
title Enhancing 3DSkyView Extension Performance
source Van Leeuwen, J.P. and H.J.P. Timmermans (eds.) Recent Advances in Design & Decision Support Systems in Architecture and Urban Planning, Dordrecht: Kluwer Academic Publishers, ISBN: 1-4020-24088, p. 325-340
summary This paper presents a second version of the 3DSkyView extension. The purpose of that extension was to implement a calculation algorithm for assessment and visualization of sky view factors (SVF) by means of tools available in a Geographical Information System (GIS). The sky view factor is a thermal and geometric parameter pointed out in the specialized literature as one of the main causes of urban heat islands. A 3D-GIS is a powerful tool for reaching the goal of this research because it allows the storage, treatment and analysis of tri-dimensional urban data, in addition to a high level of flexibility for incorporating calculation algorithms. The objective in the 3DSkyView extension is to optimize the determination of that factor, not only reducing its demanding calculation and graphical representation time, but also generating a simplified tool for replacing expensive photographic equipment usually applied on this matter. Enhancing functions of ArcView GIS 3.2, the first version of that extension showed a very good performance allowing the automatic delineation and determination of SVF. That performance was although limited to a single observer point. The simulation of SVF for several view points in urban canyons was only possible by applying the extension as many times as the number of observers considered. Therefore, this second version was now developed in order to allow simultaneous determination of SVF for many view points. In addition, the 3DSkyView new interface is more flexible, in a way that the user may choose the kind of output wanted (graphical and/or tabular). With this new feature it is then easier to create a continuous SVF map for an entire area.
keywords Sky View Factor, Urban Geometry, GIS Extension, Urban Heat Island
series DDSS
last changed 2004/07/03 22:13

_id 2004_248
id 2004_248
authors Chang, Teng-Wen and Woodbury, Robert F.
year 2004
title GEOMETRY IN HIGHLY STRUCTURED DESIGN SPACES
source Architecture in the Network Society [22nd eCAADe Conference Proceedings / ISBN 0-9541183-2-4] Copenhagen (Denmark) 15-18 September 2004, pp. 248-254
doi https://doi.org/10.52842/conf.ecaade.2004.248
summary The Australian branch of the SEED project created a new formalism for design spaces in which the fundamental structuring operator is information specificity, formally characterised as subsumption. Here design space navigation is composed as combinations of the primitive operators of resolution, unification, anti-unification, search, query and hysterical undo. The structures needed to support such a view are highly constrained in a mathematical sense and it is in these constraints that the problems for representation of geometry arise. The research challenge is to add the formal design space exploration constraints into an existing geometric representation scheme or alternatively to discover a new scheme in which the constraints are realized. Based on Typed Feature Structures (TFS), Geometric Typed Feature Structures (GTFS) are a representation scheme and method for performing the basic design space exploration operations on geometric objects. The crucial insight behind extending TFS to geometry is to discover useful algebraic structures of geometric objects affording the mathematics required of TFS. In this paper we describe Geometric Typed Feature Structures through one example of form: IOPSet. Our method of exposition is both mathematical and graphical: for each structure we will demonstrate both how it meets the necessary formal conditions as well as the sorts of form-sculpting operations it enables. An architectural example: insulated enclosure is used as a demonstration of subsumption operations over IOPSet. One alternative description of insulated enclosure using GTFS is also shown in the paper.
keywords Geometric Typed Feature Structures, SEED, Design Space Explorer, Geometric Design Information
series eCAADe
type normal paper
email tengwen@arch.nctu.edu.tw
last changed 2022/06/07 07:56

_id 2004_142
id 2004_142
authors Achten, Henri, Jessurun, Joran and de Vries, Bauke
year 2004
title The Desk-Cave - A Low-Cost Versatile Virtual Reality Design and Research Setup Between Desktop and CAVE
source Architecture in the Network Society [22nd eCAADe Conference Proceedings / ISBN 0-9541183-2-4] Copenhagen (Denmark) 15-18 September 2004, pp. 142-147
doi https://doi.org/10.52842/conf.ecaade.2004.142
summary Virtual Reality has become an almost ubiquitous technology in many applications, but it has seen limited success in design support. Reasons for this seem to lie in lack of easily available tools, high threshold for non-programmers, and high cost of equipment. In this paper we describe a Virtual Reality environment that is developed at Design Systems called the Desk-Cave. The Desk-Cave is a low-cost VR setup that combines principles of a CAVE system with a work desk. Architecture students with no specific training in VR technology use the Desk-Cave in design projects both in the early stage and the final presentation stage. The system allows quick transfer to the Desk-Cave and architectural evaluation of design proposals.
keywords Virtual Reality, Architectural Design, Design Process, Cel Shading
series eCAADe
email h.h.achten@bwk.tue.nl
last changed 2022/06/07 07:54

_id sigradi2006_e131c
id sigradi2006_e131c
authors Ataman, Osman
year 2006
title Toward New Wall Systems: Lighter, Stronger, Versatile
source SIGraDi 2006 - [Proceedings of the 10th Iberoamerican Congress of Digital Graphics] Santiago de Chile - Chile 21-23 November 2006, pp. 248-253
summary Recent developments in digital technologies and smart materials have created new opportunities and are suggesting significant changes in the way we design and build architecture. Traditionally, however, there has always been a gap between the new technologies and their applications into other areas. Even though, most technological innovations hold the promise to transform the building industry and the architecture within, and although, there have been some limited attempts in this area recently; to date architecture has failed to utilize the vast amount of accumulated technological knowledge and innovations to significantly transform the industry. Consequently, the applications of new technologies to architecture remain remote and inadequate. One of the main reasons of this problem is economical. Architecture is still seen and operated as a sub-service to the Construction industry and it does not seem to be feasible to apply recent innovations in Building Technology area. Another reason lies at the heart of architectural education. Architectural education does not follow technological innovations (Watson 1997), and that “design and technology issues are trivialized by their segregation from one another” (Fernandez 2004). The final reason is practicality and this one is partially related to the previous reasons. The history of architecture is full of visions for revolutionizing building technology, ideas that failed to achieve commercial practicality. Although, there have been some adaptations in this area recently, the improvements in architecture reflect only incremental progress, not the significant discoveries needed to transform the industry. However, architectural innovations and movements have often been generated by the advances of building materials, such as the impact of steel in the last and reinforced concrete in this century. There have been some scattered attempts of the creation of new materials and systems but currently they are mainly used for limited remote applications and mostly for aesthetic purposes. We believe a new architectural material class is needed which will merge digital and material technologies, embedded in architectural spaces and play a significant role in the way we use and experience architecture. As a principle element of architecture, technology has allowed for the wall to become an increasingly dynamic component of the built environment. The traditional connotations and objectives related to the wall are being redefined: static becomes fluid, opaque becomes transparent, barrier becomes filter and boundary becomes borderless. Combining smart materials, intelligent systems, engineering, and art can create a component that does not just support and define but significantly enhances the architectural space. This paper presents an ongoing research project about the development of new class of architectural wall system by incorporating distributed sensors and macroelectronics directly into the building environment. This type of composite, which is a representative example of an even broader class of smart architectural material, has the potential to change the design and function of an architectural structure or living environment. As of today, this kind of composite does not exist. Once completed, this will be the first technology on its own. We believe this study will lay the fundamental groundwork for a new paradigm in surface engineering that may be of considerable significance in architecture, building and construction industry, and materials science.
keywords Digital; Material; Wall; Electronics
series SIGRADI
email oataman@uiuc.edu
last changed 2016/03/10 09:47

_id ddss2004_ra-69
id ddss2004_ra-69
authors Barton, J., B. Parolin, and V. Weiley
year 2004
title A Spatial Decision Support System for the Management of Public Housing
source Van Leeuwen, J.P. and H.J.P. Timmermans (eds.) Recent Advances in Design & Decision Support Systems in Architecture and Urban Planning, Dordrecht: Kluwer Academic Publishers, ISBN: 1-4020-2408-8, p. 69-84
summary This paper is reporting on a research project undertaken jointly between the University of New South Wales (UNSW) and the NSW Department of Housing (DoH) to develop a Spatial Decision Support System (SDSS) to assist planning, management and evaluation in areas of high public housing concentration. In the paper we will describe the development of the SDSS, the specific spatial problems challenging the DoH and the potential for the system to incorporate a range of social, financial and physical data, both internal and from other sources, for interaction and presentation in a three dimensional environment. The prototype SDSS attempts to address the specific challenges of providing better service for clients of the DoH. An information audit and survey has been conducted of the department’s resources and needs. Issues identified include the management of high-rise and superlot areas, crime mapping, community interactivity, internal and intergovernmental information sharing, interoperability and maintaining confidentiality and security of data. Interactive 3D visualisation of the model is facilitated by use of the 3map free geospace platform. Use of open source code and open standards such as X3D for 3D graphics interchange allow the project to explore advanced visualisation techniques while ensuring interoperability and data longevity.
keywords Spatial Decision Support System, Public Housing, Community Renewal, Security, Open Source, Interoperability, Visualisation, 3D GIS, PPGIS, X3D
series DDSS
last changed 2004/07/03 22:13

_id acadia07_174
id acadia07_174
authors Bontemps, Arnaud; Potvin, André; Demers, Claude
year 2007
title The Dynamics of Physical Ambiences
source Expanding Bodies: Art • Cities• Environment [Proceedings of the 27th Annual Conference of the Association for Computer Aided Design in Architecture / ISBN 978-0-9780978-6-8] Halifax (Nova Scotia) 1-7 October 2007, 174-181
doi https://doi.org/10.52842/conf.acadia.2007.174
summary This research proposes to support the reading of physical ambiences by the development of a representational technique which compiles, in a numerical interface, two types of data: sensory and filmic. These data are recorded through the use of a portable array equipped with sensors (Potvin 1997, 2002, 2004) as well as the acquisition of Video information of the moving environment. The compilation of information is carried out through a multi-media approach, by means of a program converting the environmental data into dynamic diagrams, as well as the creation of an interactive interface allowing a possible diffusion on the Web. This technique, named APMAP/Video, makes it possible to read out simultaneously spatial and environmental diversity. It is demonstrated through surveys taken at various seasons and time of the day at the new Caisse de dépôt et de placement headquarters in Montreal which is also the corpus for a SSHRC (Social Sciences and Humanities Research Council) research grant on Environmental Adaptability in Architecture (Potvin et al. 2003-2007). This case study shows that the technique can prove of great relevance for POEs (Post Occupancy Evaluation) as well as for assistance in a new design project.
series ACADIA
email arnaudbontemps@hotmail.com
last changed 2022/06/07 07:54

_id ddss2004_ra-293
id ddss2004_ra-293
authors Chang, T.-W.
year 2004
title Supporting Design Learning with Design Puzzles
source Van Leeuwen, J.P. and H.J.P. Timmermans (eds.) Recent Advances in Design & Decision Support Systems in Architecture and Urban Planning, Dordrecht: Kluwer Academic Publishers, ISBN: 1-4020-2408-8, p. 293-307
summary The design process is a puzzle-solving process. Two groups of researches that share many similarities with Puzzle-solving design process are the process of game-playing and playful learning. The main argument is using the “playing” characteristics to amplify and explore the learning process, furthermore the design process. In addition, puzzles imply playful exploration that utilizes the characteristics of “playing a game” as “solving a puzzle”. Puzzle making and puzzle solving provides an incremental exploration mechanism that is more intuitive for design learning. For understanding and realizing puzzles in design learning, this research is divided into two stages of researches—manual design puzzles and interactive design puzzles. By analysing the outcome from manual design puzzles, this research proposes a framework called (interactive) “design puzzles”. The conceptual and implementation framework of this view of design is elaborated in this paper as well as a particular design puzzle called puzzle collage is described as the realization of design puzzles.
keywords Design Puzzles, Design Collage, Puzzle-Making, Andragogy, Game Play
series DDSS
last changed 2004/07/03 22:13

_id ddss2008-33
id ddss2008-33
authors Charlton, James A.; Bob Giddings and Margaret Horne
year 2008
title A survey of computer software for the urban designprocess
source H.J.P. Timmermans, B. de Vries (eds.) 2008, Design & Decision Support Systems in Architecture and Urban Planning, ISBN 978-90-6814-173-3, University of Technology Eindhoven, published on CD
summary Urban design is concerned with the shape, the surface and the physical arrangement of all kinds of urban elements, the basic components that make up the built environment, at the level of buildings, spaces and human activities. It is also concerned with the non-visual aspects of the environment, such as noise, wind and temperature and humidity. The city square is a particular urban element which can take many forms and its geometrical relationships such as maximum dimensions, ratio of width to length and building height to length have been analysed for centuries (Alberti 1475), (Vitruvius 1550), (Sitte 1889), (Corbett 2004). Within the current urban design process there are increasing examples of three dimensional computer representations which allow the user to experience a visual sense of the geometry of city squares in an urban landscape. Computer-aided design and Virtual Reality technologies have recently contributed to this visual assessment, but there have been limited attempts at 3D computer representations which allow the user to experience a greater sense of the urban space. This paper will describe a survey of computer tools which could support a more holistic approach to urban design and which could be used to simulate a number of urban texture and urban quality aspects. It will provide a systematic overview of currently available software that could support the simulation of building density, height, colour and style as well as conditions relating to noise, shading, heat, natural and artificial light. It will describe a methodology for the selection and filtering of appropriate computer applications and offer an initial evaluation of these tools for the analysis and representation of the three-dimensional geometry, urban texture and urban quality of city centre spaces. The paper is structured to include an introduction to the design criteria relating to city centre spaces which underpins this research. Next the systematic review of computer software will be described, and selected tools will undergo initial evaluation. Finally conclusions will be drawn and areas for future research identified.
keywords Urban design, Software identification, 3D modelling, Pedestrian modelling, Wind modelling, Noise mapping, Thermal comfort, VR Engine
series DDSS
last changed 2008/09/01 17:06

_id disschoo
id disschoo
authors Choo, Seung Yeon
year 2004
title STUDY ON COMPUTER-AIDED DESIGN SUPPORT OF TRADITIONAL ARCHITECTURAL THEORIES
source Technische Universität München
summary The research presented in this thesis describes a computer-aided design support of traditional architectural theories. Traditional architectural theories in western architecture have been considered as a basis for answering the fundamental questions of architecture: proportion, symmetry, colour, harmony and so on. In particular, the aesthetic aspect of these theories has been one of many important architectural aspects, and which is concerned with the field of architecture in determining the beauty of architectural form. The most significant role of the traditional theories in architecture is to maintain unity, to avoid chaos and then to achieve harmony in a design, using some specific design principles. However, current technology-guided constructions tend to neglect often the importance of these theories due to the standardization of building elements, due to mechanically-prepared construction and the reducing completion costs, etc. Thus, this research proposes a design support system as a design assistant that gives an intelligent advice on architectural design, using analytical design- and ordering- principles of traditional theories for the optimization of the architectural design from the aesthetic perspective. To evaluate the aesthetic quality of an architectural design, this system is implemented in the AutoCAD environment, using the AutoLISP. It is applied so as to explain and develop aesthetic qualities of a design. Designs proposed by this system include optimum designs, which are based on the traditional architectural theories, and new ones which can be in future connected to information models. To do this, the definition of information about building elements is accomplished by using the neutral format EXPRESS and EXPRESS-G for such application systems. The results of the application system are presented, such as the easily generating and quickly conceptualising of an object model, the checking of the aesthetic value of the design during the various design phases, the helping to find direction during rational searching for a solution. The user can easily appreciate the usefulness of the proposed system as a set of tools for searching for rational architectural aesthetics and formal solutions at different design-stages. It is to be hoped that a new "traditional" fundamental of architecture, such as the proposed system, incorporating CAAD systems, will find its place among new technological methods in the AEC industry and so help to bridge the gap between the value of traditional architecture and CAAD systems.
keywords Aesthetics, Design Theory, Order Principle, Product Model, IFC, AutoCAD/AutoLISP
series thesis:PhD
type normal paper
email skkaa2000@yahoo.de
more http://tumb1.biblio.tu-muenchen.de/publ/diss/ar/2004/choo.html
last changed 2004/05/23 07:05

_id sigradi2004_129
id sigradi2004_129
authors Clarissa Ribeiro; Anja Pratschke; Azael Camargo
year 2004
title [on]_ambiente para uma comunidade virtual ["[on]_ambiente" for a Virtual Community]
source SIGraDi 2004 - [Proceedings of the 8th Iberoamerican Congress of Digital Graphics] Porte Alegre - Brasil 10-12 november 2004
summary Inside of a public politics project . Comunidades Online . that considers the construction of a virtual community as intervention in a concrete community, the article considers some initial parameters capable to guide the design of a virtual environment of dialogue and interaction for this on-line community. The objective of this article is to trace the main lines that will direct the design process this environment in a boarding with approaches to the architecture, placing on questions to the space where this dialogue happens. The work develops from the discussions circa the concept of community; of interfaces examples that illustrate different ways to give quality support to the dialogue between users, and one more consistent representation of .I., as well as expression of the identity in the virtual environment; and of an alternative presentation for technological basement, the semantic web.
keywords Community; virtual communities; semantic web; virtual environment design
series SIGRADI
email complexus@complexus.com.br, anjaprat@sc.usp.br, azaelrca@sc.usp.br
last changed 2016/03/10 09:49

_id sigradi2004_240
id sigradi2004_240
authors Dora Castañé; Arturo F. Montagu
year 2004
title Mercedes: De lo sustentable al ecoproyecto en poblados con patrimonio histórico [Mercedes: A Sustainable Ecoproject in Towns with Historical Patrimony]
source SIGraDi 2004 - [Proceedings of the 8th Iberoamerican Congress of Digital Graphics] Porte Alegre - Brasil 10-12 november 2004
summary This proposal addresses the following topic of a doctoral thesis in progress: The Evolution and Development of Digitized Processes for the Research and Maintenance of Small Town Patrimonies, School and Architecture and Urban Design, University of Buenos Aires, co-directed by architects A. Montagu and R. Gutierrez. The research has been based on the town of Mercedes, Province of Buenos Aires, Argentina, symbols of Buenos Aires.s cultural heritage. At this stage, we are looking for alternative methods to support a project of patrimonial preservation that would help define future landscapes of small towns, and, at the same time, would have minimal or positive environmental impact. This analysis proposes reflexive studies of the paradigms affecting the environment and the feasibility of the project, with the intention of utilizing the concept of .ecoproject.. Therefore, the crucial assistance of specific digital systems, from which evolution is analyzed, supports and enhances the efficiency of the proposed goal. New and broad research opportunities are opening up in this field.
keywords Patrimony, research, virtual city, preservation
series SIGRADI
email dcastane@elsitio.net
last changed 2016/03/10 09:50

_id fa6e
id fa6e
authors Escayola, Rosa María; Bauleo, Silvina A.; Diez, Leonardo Pablo
year 2004
title DISTANCE TEACHING OF MATHEMATICS FOR STUDENTS OF ARCHITECTURE: IS IT POSSIBLE?
source Proceedings of the Fourth International Conference of Mathematics & Design, Special Edition of the Journal of Mathematics & Design, Volume 4, No.1, pp. 105-109.
summary On the basis of our experience as teachers of Mathematics in the School of Architecture of the University of Buenos Aires and with the support of an expert designer of image and sound, we undertook the task of distance teaching the subject Mathematics II for students of Architecture. The academic guidance of Ms Spinadel, PhD, the university’s authorization and the support of a computer platform provided by Nueva Internet S.A. have enabled the completion of this project. We were encouraged to set up the distance teaching of the subject by the many advantages the system offers, namely, the chance for students to work at home with a computer-based platform containing all of the subject’s contents and to integrate and apply all the knowledge acquired in architectural contexts; and the chance for teachers to offer on-line guidance and tutorials. Distance teaching is not to be understood or configured as an accumulation of calculus procedures. Rather, it should be thought of as having the major aim of promoting the full development of the students’ imagination for the solution of architectural design problems. For that purpose, students must become familiar with the interface to be used as the virtual classroom, read the theoretical introduction to every one of the units, solve application problems (the students are provided with all the material, which they can visualize on line or print), and send their tutor all the queries they may have so that the process of teaching and learning is facilitated and enriched. The solution to exercises is presented in a didactic manner and students can resort to additional bibliography, image and formula galleries and a technical help forum provided by the software firm. A virtual classroom has been set up where students and teachers interact all the time. Students must also submit integrative assignments, which are corrected by the tutor and will form part of the subject’s final assessment, together with an in-person exam at the end of the semester. Excellent results have been obtained so far, being that this is the first time a subject of the Architecture course is taught this way. This paper is intended to share this experience and show how, in spite of the modality of the subject, the interaction achieved between students and teachers has proved to be very enriching.
series other
type normal paper
email vspinade@fibertel.com.ar
last changed 2005/04/07 12:50

_id 2004_396
id 2004_396
authors Fischer, Thomas
year 2004
title Microcontroller - Enhanced Physical Models for Architectural and Product Design
source Architecture in the Network Society [22nd eCAADe Conference Proceedings / ISBN 0-9541183-2-4] Copenhagen (Denmark) 15-18 September 2004, pp. 396-403
doi https://doi.org/10.52842/conf.ecaade.2004.396
summary Electronic sensors, controllers, displays and actuators can significantly enhance the value of physical models as processes of use, interaction and transformation take center stage in various fields of design. These technologies allow the development of novel computer interfaces for new kinds of interaction with virtual models, and in the future they will allow new types of active building components and materials for automated construction and dynamic runtime adaptations of inhabitable environments. However, embedding programmed logic into physical objects seems to confront designers and model makers with a steep learning curve outside the domains of their traditional expertise. The variety of alternative technologies and development tools in this area has a particularly disorienting effect on novices. Some early experiences however suggest that mastery of this learning curve is easily within reach, given some basic introduction, guidance and support. It is the purpose of this paper to provide designers with a starting point for explorations into this area, to give orientation and to demonstrate some possible development approaches and results.
keywords Interaction, Process, High-Fidelity Models, Microcontrollers, Electronics
series eCAADe
last changed 2022/06/07 07:51

For more results click below:

this is page 0show page 1show page 2show page 3show page 4show page 5... show page 28HOMELOGIN (you are user _anon_893026 from group guest) CUMINCAD Papers Powered by SciX Open Publishing Services 1.002