Cumincad : CUMINCAD Papers : Search Results

CumInCAD is a Cumulative Index about publications in Computer Aided Architectural Design
supported by the sibling associations ACADIA, CAADRIA, eCAADe, SIGraDi, ASCAAD and CAAD futures

PDF papers
References

Hits 1 to 20 of 572

Reformat results as: short short into frame detailed detailed into frame

_id	2004_350
id	2004_350
authors	Asanowicz, Alexander
year	2004
title	Computer, Creativity and Unpredictability
doi	https://doi.org/10.52842/conf.ecaade.2004.350
source	Architecture in the Network Society [22nd eCAADe Conference Proceedings / ISBN 0-9541183-2-4] Copenhagen (Denmark) 15-18 September 2004, pp. 350-357
summary	Computers in designing are usually considered as a tool for preparing technical documentation, storage and managing information, coordinating of flow of design process, modelling and all kind of visualisations (renderings, animation, VR models). At the early design stages, when an idea of the form is created, computer is not used very often. The reason for this is that traditional computer drawing is too completed to be used at this stage. In new methods of supporting creativity, computer should be used for creation of less precise, unpredictable but more inspiring images. This method are based on the thesis that emotional elements have a great affect on the decision making process in designing. Intuition, unpredictability and no logic are the essence of creativity in the selection of associations. Confirmation of this statement we may find in many theories of creativity (theory of incubation elaborated by Wallas, genploration (Finke, Ward and Smith), redundant generation (Lem), synectics (Gordon)). All these theories emphasize the role of unpredictable associations and metaphors in creativity. Process of metaphorisation is characteristic for our era and plays important role in creative process. That’s why we need the new methods of graphic computer and non-computer transformation, which allows us a fuller exploration of design metaphors. The final conclusion is built on the thesis that too precise tools promote cause to decrease differences.
keywords	Creativity; Design Theory; Metaphors
series	eCAADe
email
last changed	2022/06/07 07:54

_id	ascaad2004_paper4
id	ascaad2004_paper4
authors	Ahmad, Sumbul and Scott C. Chase
year	2004
title	Design Generation of the Central Asian Caravanserai
source	eDesign in Architecture: ASCAAD's First International Conference on Computer Aided Architectural Design, 7-9 December 2004, KFUPM, Saudi Arabia
summary	Challenges for the study of Islamic architecture include its abundance and diversity in expression and its classification based on distinct functional or stylistic types. We address these issues by presenting shape grammars as a methodology for the analysis and design generation of Islamic architecture, with a specific example in the form of a parametric shape grammar for central Asian caravanserais. The grammar is developed by identifying distinct design types. Shape rules are created based on a study of the spatial elements and their organisation in the designs. We illustrate the utility of the grammar by deriving an extant design and as well as, previously unknown designs. We conclude by discussing possible extensions to the current grammar and future work involving the development of a grammar based framework for the comparative analysis of medieval Islamic courtyard buildings.
series	ASCAAD
email
last changed	2007/04/08 19:47

_id	sigradi2004_333
id	sigradi2004_333
authors	Andrés S. Rodríguez
year	2004
title	Exploración de relaciones entre analogías y bocetos durante la generación de ideas en diseño industrial como elicitación de requerimientos para CAD [Exploration of Relations between Analogies and Sketches During the Generation of Ideas in Industrial Design for Eliciting CAD Requirements]
source	SIGraDi 2004 - [Proceedings of the 8th Iberoamerican Congress of Digital Graphics] Porte Alegre - Brasil 10-12 november 2004
summary	An exploration on the analogy-based idea generation process in industrial design is reported. In particular we try to identify relationships between the sketching process and the analogy building in order to elicit requirements for a supporting software. We use concurrent think aloud protocols to obtain experimental data and an extension of a proved content oriented schema to analyze them. Statistical analysis on segments containing .analogical chains. found relations between analogical and design actions that allow us to support the hypothesis that the sketch seems to be more useful for helping the analytical aspects of the analogical making (i.e. to code a situation in terms of higher order relations) than the synthetic ones (i.e. to identify an analogy source). Results were interpreted as software requirements for a Computer Aided Design Application.
keywords	Sketching, Analogy, CAD, Industrial design, Protocol analysis
series	SIGRADI
email
last changed	2016/03/10 09:47

_id	ascaad2004_paper2
id	ascaad2004_paper2
authors	Barrionuevo, Luis F.; Roberto Gómez López, and Roberto Serrentino
year	2004
title	Spirospaces in Architectural Design
source	eDesign in Architecture: ASCAAD's First International Conference on Computer Aided Architectural Design, 7-9 December 2004, KFUPM, Saudi Arabia
summary	The proposal of this paper is to present "Spirospaces" and their utility in Architectural Design, exploring their relation with other geometrical disciplines such as knot theory, tiling and patterns generation. A spirospace is a geometrical entity generated from the spatial interpretation of a "Spirolateral", a well known bidimentional entity. A computer program to generate spirospaces configurations is presented and demonstrated with several examples. This is complemented with the exposition of the mathematical framework that supports closed spirospaces generation.
series	ASCAAD
email
last changed	2007/04/08 19:47

_id	ddss2004_ra-247
id	ddss2004_ra-247
authors	Bi, G. and B. Medjdoub
year	2004
title	Hybrid Approach to Solve Space Planning Problems in Building Services
source	Van Leeuwen, J.P. and H.J.P. Timmermans (eds.) Recent Advances in Design & Decision Support Systems in Architecture and Urban Planning, Dordrecht: Kluwer Academic Publishers, ISBN: 1-4020-2408-8, p. 247-261
summary	In this paper an object-based CAD programming is used to take advantage of standardization to handle the schematic design, sizing, layout for services in a building ceiling void. From the specification of the building 3D model, our software proceeds through different steps; from the determination of the standard number and size of fan coils to the generation of 3D solutions. In order to deal with more complex geometry and larger problems, we have used a hybrid approach: Case Based Reasoning (CBR) within Constraint Satisfaction Problem (CSP) approaches. In practice, engineers in building services use previous solutions and adapt them to new problems. CBR mirrors this practical approach and does help us to deal with increasingly complex geometry effectively, and meanwhile CSP has been used for layout adaptation. The results have shown that it is possible to define and implement standard solutions to produce designs comparable with current practice. The benchmarking exercise has underlined many advantages and made some suggestions for further development. This project is funded by The Engineering and Physical Sciences Research Council (EPSRC) in UK.
keywords	Case-Based Reasoning, Constraint Satisfaction Problem, Ceiling Voids Layout, Complex Geometry, Large Problem
series	DDSS
last changed	2004/07/03 22:13

_id	sigradi2004_213
id	sigradi2004_213
authors	Carlos Roberto Barrios Hernandez
year	2004
title	Parametric Gaudi
source	SIGraDi 2004 - [Proceedings of the 8th Iberoamerican Congress of Digital Graphics] Porte Alegre - Brasil 10-12 november 2004
summary	This research is a work in progress in the development of parametric systems for modeling of complex shapes. The research takes on the fundamental rules for form generation of column knots of the Expiatory Temple of the Sagrada Familia in Barcelona. Designed by the Spanish Architect, Antonio Gaudi, the forms of the Sagrada Familia represent a synthesis of manipulation of simple geometrical rules and the use of basic procedures which result in a rich language with no precedents in architecture.
keywords	Parametric modeling, design variations, evaluation of designs
series	SIGRADI
email
last changed	2016/03/10 09:48

_id	0131
id	0131
authors	Chiarella, Mauro
year	2004
title	GEOMETRY AND ARCHITECTURE: NURBS, DESIGN AND CONSTRUCTION
source	Proceedings of the Fourth International Conference of Mathematics & Design, Special Edition of the Journal of Mathematics & Design, Volume 4, No.1, pp. 135-139.
summary	Geometry regarded as a tool for understanding is perhaps the part of Mathematics which is the most intuitive, concrete and linked to reality. From its roots as a tool to describe and measure shapes, geometry as ‘the space science’ , has grown towards a theory of ideas and methods by means of which it is possible to build and study idealised models, not only from the physical world but also from the real world. In graphic architecture thought, geometry usually appears as an instrumental support for project speculation. Geometric procedures are presented as representational resources for the graphic testing of reflection and for the exposition of ideas in order to build a logical order as regards representation and formal prefiguration. The fast rise of computing in the last decades has made it possible for architects to work massively and in a graphic and intuitive way with mathematical representations of tridimensional geometry, such as the NURBS . These organic surfaces of free shapes defined by vectorial curves have allowed access to a rapid generation of complex shapes with a minumum amount of data and of specific knowledge. The great development of modelling achieved by the digital media and the limitations in the technical and building areas and in the existence of materials which are coherent with the resultant shapes reveal a considerable distance between the systems of ideation and simulation characteristic of the computing era and the analogous systems of production inherited from the slow industrial development. This distance has been shortened by CAD/CAM systems, which are, however, not very accessible to the architectural field. If we incorporate to the development of these divergent media the limitations which are distinctive of the material resources and procedures of the existent local technology, the aforementioned distance seems even greater. Assuming the metaphor of living at the threshold of two ages (industrial-computing, analogical-digital, material-virtual) and the challenge of the new conceptual and operational tools in our field, we work in the mixture, with no exclusions or substitutions, proposing (by means of the development of informational complements) some alternatives of work to approach the issue under discussion from the Architecture Workshop.
keywords	Geometry, Design, NURBS, Unfolding, Pedagogy
series	other
type	normal paper
email
last changed	2005/04/07 12:51

_id	316caadria2004
id	316caadria2004
authors	Chor-Kheng Lim
year	2004
title	A Revolution of the Design Process
doi	https://doi.org/10.52842/conf.caadria.2004.571
source	CAADRIA 2004 [Proceedings of the 9th International Conference on Computer Aided Architectural Design Research in Asia / ISBN 89-7141-648-3] Seoul Korea 28-30 April 2004, pp. 571-583
summary	Along with the development of computer technologies and CAD/CAM, digital tools are increasingly adapted in architectural design. Developed thus far, functions of digital tools are no long limited to two-dimensional drafting or final presentation; they have become tools that can assist design thinking. Because of the involvement of digital tools, the design process has been greatly affected; or, one may say that digital tools liberated the confines of forms and structuring of architectures. This research aims to explore the procedures in the design process using digital tools. In the conclusion, we found that in an attempt to abridge the gap between design ideas and actual implementation, the designer used the digital reality simulation function very frequently to assist in decision making, and in order to process more complex and freer forms, the designer relied on the 3D design environment to carry out his thinking process and amendments. In addition, the digital design process is mainly conducted through the methods of 1, 3D modeling, 2, Simulation, 3, Generation, and 4, Fabrication. The steps and methods in the digital design process are obviously different from the traditional ones, which focus mainly on mass-production of 2D drawings; therefore, it is certain that the new tools will change the outcome of the designs.
series	CAADRIA
email
last changed	2022/06/07 07:56

_id	sigradi2004_360
id	sigradi2004_360
authors	Eleanna Cadalso Vera
year	2004
title	Hmo: hibridos entre la maquina y el organismo. Procesos de aproximación a la realidad material [Hmo: Hybrids Between Machine and Organism. Processes to Approach Material Reality]
source	SIGraDi 2004 - [Proceedings of the 8th Iberoamerican Congress of Digital Graphics] Porte Alegre - Brasil 10-12 november 2004
summary	How do we imagine the future of accessories? Will they be made of metals such as gold, silver, bronze and precious stones? Or will they be conceived from new synthetic ergonomic and intelligent materials such as titanium, carbon, plastics and elastometers? HMO is an experimental project that investigates this area of design and science. Interested in the balance between technology and nature, this project seeks to participate in the new generation of accessories, conceived as artifacts made of smart material that will amplify our human senses and natural capacities in the near future.
series	SIGRADI
email
last changed	2016/03/10 09:51

_id	2004_148
id	2004_148
authors	Fatah gen. Schieck, A., Penn, A., Mottram, C., Strothmann, C., Ohlenburg, J., Broll, W. and Aish, F.
year	2004
title	Interactive Space Generation through Play - Exploring Form Creation and the Role of Simulation on the Design Table
doi	https://doi.org/10.52842/conf.ecaade.2004.148
source	Architecture in the Network Society [22nd eCAADe Conference Proceedings / ISBN 0-9541183-2-4] Copenhagen (Denmark) 15-18 September 2004, pp. 148-158
summary	In this paper we report on recent developments in ARTHUR: an approach to support complex design and planning decisions for architects together with the simulation of pedestrian movement and the integration of existing CAD tools on the design table. Following a brief introduction, past and current work that has taken a similar approach will be reviewed. Next we describe a scenario that integrates agent-based simulations of pedestrian movement with space creation, and then give an overview of the system before finally discussing findings related to recent user evaluation studies of the system. This paper suggests that the integration of simulated pedestrian movement on the design table, while going through a cycle of reflection-in-action, plays a vital role in exploring possible design solutions and encourages new and different ways of thinking about design problems.
keywords	Tangible User Interface, Pedestrian Simulation, Collaboration, Augmented Reality (AR), CAD Integration
series	eCAADe
last changed	2022/06/07 07:55

_id	2004_184
id	2004_184
authors	Fatah gen. Schieck, Ava
year	2004
title	Using Multiple Input Devices
doi	https://doi.org/10.52842/conf.ecaade.2004.184
source	Architecture in the Network Society [22nd eCAADe Conference Proceedings / ISBN 0-9541183-2-4] Copenhagen (Denmark) 15-18 September 2004, pp. 184-194
summary	The field of computer graphics has developed significantly over the last decade. However, most current CAD systems support only the two most common input devices: a mouse and a keyboard. In addition to that few, if any, systems make it easy for the user or the programmer to add and use new input devices. People tend to use both hands to manipulate 3D real world objects; one hand is used to orient the object while the other hand is used to perform some operation on it. The same thing could be applied to computer modelling in the conceptual phase of the design process. Accordingly, the 3D object can be easily and intuitively changed through interactive manipulation of both hands. This paper investigates the manipulation and creation of free form geometries through the use of interactive interfaces with multiple input devices. It demonstrates that using multiple input devices can offer many opportunities for form generation resulting in visually rich forms. However, the experimental results demonstrated that regulations are needed to avoid developing inefficient two-handed interfaces.
keywords	Modelling Interactively, Architectural Design Tools at the Conceptual Phase, Affordable Low-Cost Solution, Multiple Input Devices MID
series	eCAADe
last changed	2022/06/07 07:55

_id	acadia08_072
id	acadia08_072
authors	Frumar, Jerome
year	2008
title	An Energy Centric Approach to Architecture: Abstracting the material to co-rationalize design and performance
doi	https://doi.org/10.52842/conf.acadia.2008.072
source	Silicon + Skin: Biological Processes and Computation, [Proceedings of the 28th Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) / ISBN 978-0-9789463-4-0] Minneapolis 16-19 October 2008, 72-81
summary	This paper begins by exploring matter as an aggregated system of energy transactions and modulations. With this in mind, it examines the notion of energy driven form finding as a design methodology that can simultaneously negotiate physical, environmental and fabrication considerations. The digital workspace enables this notion of form finding to re-establish itself in the world of architecture through a range of analytic tools that algorithmically encode real world physics. Simulating the spatial and energetic characteristics of reality enables virtual “form generation models that recognize the laws of physics and are able to create ‘minimum’ surfaces for compression, bending [and] tension” (Cook 2004). The language of energy, common in engineering and materials science, enables a renewed trans-disciplinary dialogue that addresses significant historic disjunctions such as the professional divide between architects and engineers. Design becomes a science of exploring abstracted energy states to discover a suitable resonance with which to tune the built environment. ¶ A case study of one particular method of energy driven form finding is presented. Bi-directional Evolutionary Structural Optimization (BESO) is a generative engineering technique developed at RMIT University. It appropriates natural growth strategies to determine optimum forms that respond to structural criteria by reorganizing their topology. This dynamic topology response enables structural optimization to become an integrated component of design exploration. A sequence of investigations illustrates the flexibility and trans-disciplinary benefits of this approach. Using BESO as a tool for design rather than purely for structural optimization fuses the creative approach of the architect with the pragmatic approach of the engineer, enabling outcomes that neither profession could develop in isolation. The BESO case study alludes to future design processes that will facilitate a coherent unfolding of design logic comparable to morphogenesis.
keywords	Energy; Form-Finding; Morphogenesis; Optimization; Structure
series	ACADIA
last changed	2022/06/07 07:50

_id	sigradi2006_e028c
id	sigradi2006_e028c
authors	Griffith, Kenfield; Sass, Larry and Michaud, Dennis
year	2006
title	A strategy for complex-curved building design:Design structure with Bi-lateral contouring as integrally connected ribs
source	SIGraDi 2006 - [Proceedings of the 10th Iberoamerican Congress of Digital Graphics] Santiago de Chile - Chile 21-23 November 2006, pp. 465-469
summary	Shapes in designs created by architects such as Gehry Partners (Shelden, 2002), Foster and Partners, and Kohn Peterson and Fox rely on computational processes for rationalizing complex geometry for building construction. Rationalization is the reduction of a complete geometric shape into discrete components. Unfortunately, for many architects the rationalization is limited reducing solid models to surfaces or data on spread sheets for contractors to follow. Rationalized models produced by the firms listed above do not offer strategies for construction or digital fabrication. For the physical production of CAD description an alternative to the rationalized description is needed. This paper examines the coupling of digital rationalization and digital fabrication with physical mockups (Rich, 1989). Our aim is to explore complex relationships found in early and mid stage design phases when digital fabrication is used to produce design outcomes. Results of our investigation will aid architects and engineers in addressing the complications found in the translation of design models embedded with precision to constructible geometries. We present an algorithmically based approach to design rationalization that supports physical production as well as surface production of desktop models. Our approach is an alternative to conventional rapid prototyping that builds objects by assembly of laterally sliced contours from a solid model. We explored an improved product description for rapid manufacture as bilateral contouring for structure and panelling for strength (Kolarevic, 2003). Infrastructure typically found within aerospace, automotive, and shipbuilding industries, bilateral contouring is an organized matrix of horizontal and vertical interlocking ribs evenly distributed along a surface. These structures are monocoque and semi-monocoque assemblies composed of structural ribs and skinning attached by rivets and adhesives. Alternative, bi-lateral contouring discussed is an interlocking matrix of plywood strips having integral joinery for assembly. Unlike traditional methods of building representations through malleable materials for creating tangible objects (Friedman, 2002), this approach constructs with the implication for building life-size solutions. Three algorithms are presented as examples of rationalized design production with physical results. The first algorithm [Figure 1] deconstructs an initial 2D curved form into ribbed slices to be assembled through integral connections constructed as part of the rib solution. The second algorithm [Figure 2] deconstructs curved forms of greater complexity. The algorithm walks along the surface extracting surface information along horizontal and vertical axes saving surface information resulting in a ribbed structure of slight double curvature. The final algorithm [Figure 3] is expressed as plug-in software for Rhino that deconstructs a design to components for assembly as rib structures. The plug-in also translates geometries to a flatten position for 2D fabrication. The software demonstrates the full scope of the research exploration. Studies published by Dodgson argued that innovation technology (IvT) (Dodgson, Gann, Salter, 2004) helped in solving projects like the Guggenheim in Bilbao, the leaning Tower of Pisa in Italy, and the Millennium Bridge in London. Similarly, the method discussed in this paper will aid in solving physical production problems with complex building forms. References Bentley, P.J. (Ed.). Evolutionary Design by Computers. Morgan Kaufman Publishers Inc. San Francisco, CA, 1-73 Celani, G, (2004) “From simple to complex: using AutoCAD to build generative design systems” in: L. Caldas and J. Duarte (org.) Implementations issues in generative design systems. First Intl. Conference on Design Computing and Cognition, July 2004 Dodgson M, Gann D.M., Salter A, (2004), “Impact of Innovation Technology on Engineering Problem Solving: Lessons from High Profile Public Projects,” Industrial Dynamics, Innovation and Development, 2004 Dristas, (2004) “Design Operators.” Thesis. Massachusetts Institute of Technology, Cambridge, MA, 2004 Friedman, M, (2002), Gehry Talks: Architecture + Practice, Universe Publishing, New York, NY, 2002 Kolarevic, B, (2003), Architecture in the Digital Age: Design and Manufacturing, Spon Press, London, UK, 2003 Opas J, Bochnick H, Tuomi J, (1994), “Manufacturability Analysis as a Part of CAD/CAM Integration”, Intelligent Systems in Design and Manufacturing, 261-292 Rudolph S, Alber R, (2002), “An Evolutionary Approach to the Inverse Problem in Rule-Based Design Representations”, Artificial Intelligence in Design ’02, 329-350 Rich M, (1989), Digital Mockup, American Institute of Aeronautics and Astronautics, Reston, VA, 1989 Schön, D., The Reflective Practitioner: How Professional Think in Action. Basic Books. 1983 Shelden, D, (2003), “Digital Surface Representation and the Constructability of Gehry’s Architecture.” Diss. Massachusetts Institute of Technology, Cambridge, MA, 2003 Smithers T, Conkie A, Doheny J, Logan B, Millington K, (1989), “Design as Intelligent Behaviour: An AI in Design Thesis Programme”, Artificial Intelligence in Design, 293-334 Smithers T, (2002), “Synthesis in Designing”, Artificial Intelligence in Design ’02, 3-24 Stiny, G, (1977), “Ice-ray: a note on the generation of Chinese lattice designs” Environmental and Planning B, volume 4, pp. 89-98
keywords	Digital fabrication; bilateral contouring; integral connection; complex-curve
series	SIGRADI
email
last changed	2016/03/10 09:52

_id	ijac20042405
id	ijac20042405
authors	Heitor, Teresa V.; Duarte, José P.; Pinto, Rafaela M.
year	2004
title	Combing Grammars and Space Syntax: Formulating, Generating and Evaluating Designs
source	International Journal of Architectural Computing vol. 2 - no. 4, 492-515
summary	This paper is concerned with how two different computational approaches to design – shape grammars and space syntax – can be combined into a single common framework for formulating, generating, and evaluating designs. The main goal is to explore how the formal principles applied in the design process interact with the spatial properties of the designed objects. Results suggest that space syntax is (1) useful in determining the universe of solutions generated by the grammar and (2) in evaluating the evolving designs in terms of spatial properties and, therefore, in guiding the generation of designs.
series	journal
email
more	http://www.multi-science.co.uk/ijac.htm
last changed	2007/03/04 07:08

_id	sigradi2004_162
id	sigradi2004_162
authors	Isabel Amalia Medero Rocha
year	2004
title	A concepção arquitetônica em ambiente computacional, a ferramenta como fator interveniente durante a geração de idéias Paavi-projeto de arquitetura em ambientes virtuais interativos [The Conception of Architecture in a Computational Environment - The Tool as an Intervening Factor during the Generation of Ideas (Paavi- Architectural Project in Interactive Virtual Environments)]
source	SIGraDi 2004 - [Proceedings of the 8th Iberoamerican Congress of Digital Graphics] Porte Alegre - Brasil 10-12 november 2004
summary	This study presents the results obtained as of the teaching of architectural project at a digital workshop using the WEB environment and its graphic and textual interaction tools. Sketches and external and internal 3D modeling of the architectural object formed the corpus of this investigation. The architectural concept phase (generation of ideas) was given pedagogical emphasis, based on a core concept established by conceptual images and to which space, software and formal construction elements are subordinated. The computational tool was seen to become one of the agents in the idea generation process by assisting in the arrangement of the designer.s initial ideas and by establishing project procedures that use computer-based operations. These project procedures reconstruct the object perceived as architectural concept. The central notion in the architectural proposition is the decisive element in the choice and use of the graphic software in the design process, considering its different steps.
series	SIGRADI
email
last changed	2016/03/10 09:53

_id	108caadria2004
id	108caadria2004
authors	Jin Baek Kim, Yongwook Jeong
year	2004
title	Collaborative Caad: State-of-the-Art and the Future - A Comparative Study of CAAD, Product Development, and Group Support Systems
doi	https://doi.org/10.52842/conf.caadria.2004.117
source	CAADRIA 2004 [Proceedings of the 9th International Conference on Computer Aided Architectural Design Research in Asia / ISBN 89-7141-648-3] Seoul Korea 28-30 April 2004, pp. 117-132
summary	In this paper, we identify requirements of the design collaboration systems through a comparative study of CAAD, product development, and group support systems. Compared with the architectural design domain, we identify that research on productdevelopment systems has made strong point in systematic concept generation and selection, reflecting customer needs into design decisions, and analyzing their influence on the overall cost. We also find immediately applicable research result on the coordination structure from the group support systems domain. Based on this observation, we propose functional requirements of the next generation collaborative CAAD systems.
series	CAADRIA
email
last changed	2022/06/07 07:52

_id	eaea2003_24-ws-joklova-kosco
id	eaea2003_24-ws-joklova-kosco
authors	Joklova, V., Kosco, I.
year	2004
title	Virtual Communication and IT in Architectural Education and Practice
source	Spatial Simulation and Evaluation - New Tools in Architectural and Urban Design [Proceedings of the 6th European Architectural Endoscopy Association Conference / ISBN 80-227-2088-7], pp. 116-121
summary	Research and innovation in the field of IT and communication facilities and technologies represents a new dimension, characteristic for the end of 20th and beginning of 21st century. Information technologies provide great opportunities in the process of architectural and urban design creation and spatial evaluation. They are very powerful tools for the architect, either in practice or still student, to express his thoughts, work, design. Information technologies also present strong means for communication in the process of generation of architectural and urban design. Main target in the educational activity of the Department of Computer Aided Architectural Design at the Faculty of Architecture is to train students in making the most efficient choices for software methods and technologies, which they use in their studio project works in architecture, landscape design, interior or industrial design. The aspects of teaching, research activity and own architectural practice creativity is in many way stressed.
series	EAEA
more	http://info.tuwien.ac.at/eaea
last changed	2005/09/09 10:43

_id	acadia03_040
id	acadia03_040
authors	Katherine A. Liapi, Katherine A. and Kim, Jinman
year	2003
title	A Parametric Approach to the Design of a Tensegrity Vaulted Dome for an Ephemeral Structure for the 2004 Olympics
doi	https://doi.org/10.52842/conf.acadia.2003.301
source	Connecting >> Crossroads of Digital Discourse [Proceedings of the 2003 Annual Conference of the Association for Computer Aided Design In Architecture / ISBN 1-880250-12-8] Indianapolis (Indiana) 24-27 October 2003, pp. 301-309
summary	Tensegrity, defined as “tensional integrity,” is central to the design of a semi-open exhibition space that was submitted as an entry to the international competition for the design of “Ephemeral Structures for the City of Athens,” in the context of the 2004 Olympic Games. The main feature of the proposed exhibition space is a vaulted dome composed of interconnected detachable and deployable tensegrity units. The most challenging aspect in the design of the tensegrity vault was the generation of alternative spatial configurations for form exploration and study. For this purpose a mathematical code has been developed that links all the parameters that affect the design of tensegrity vaults. The code also allows for the parametric graphical generation of the vault by displaying geometric information in a 3D environment. This paper discusses the geometric basis of the code and its usefulness in the morphological study of the tensegrity vaulted dome for the proposed ephemeral structure. The mathematical code has been shown to significantly facilitate the study of various preliminary configurations of tensegrity vaulted structures.
series	ACADIA
email
last changed	2022/06/07 07:52

_id	502caadria2004
id	502caadria2004
authors	Kirsty A. Beilharz
year	2004
title	Designing Generative Sound for Responsive 3D Digital Environment Interaction
doi	https://doi.org/10.52842/conf.caadria.2004.741
source	CAADRIA 2004 [Proceedings of the 9th International Conference on Computer Aided Architectural Design Research in Asia / ISBN 89-7141-648-3] Seoul Korea 28-30 April 2004, pp. 741-758
summary	This paper examines three key areas of responsive sound interaction in 3D Digital Environments: designing generative sound that derives its composition and relevance from social and physical human interaction within a digital environment; the relation of sonic structure to the digital visual and spatial experience; and responsive, reactive real time sound generation activated by environmental conditions and human behaviours. The primary purposes for responsive sound design are: (1) to provide navigational cues supporting way-finding and spatial orientation; and (2) to provide realtime generative environmental sound that reflects social behaviour in a way that is meaningful and recognisable. The applied contexts for navigational cues and environmental generative sound include online (multi-user), synchronous Virtual Environments and Digital Installation Spaces (e.g. intelligent rooms, virtual reality and immersive environments). Outcomes of responsive sound design include: a trigger system of aural alerts, warnings and guidance; a computational system for generating sound in real time activated by spatial location and social interaction; and an audio (non-visual) tool aiding spatial orientation and way-finding interaction in 3D immersive Digital Environments.
series	CAADRIA
email
last changed	2022/06/07 07:51

_id	315caadria2004
id	315caadria2004
authors	Kuo-Chung Wen, Wei-Lung Chen
year	2004
title	Application of Genetic Algorithms to Establish Flooding Evacuation Path Model in Metropolitan Area
doi	https://doi.org/10.52842/conf.caadria.2004.557
source	CAADRIA 2004 [Proceedings of the 9th International Conference on Computer Aided Architectural Design Research in Asia / ISBN 89-7141-648-3] Seoul Korea 28-30 April 2004, pp. 557-570
summary	This research has shown the difficulties associated with the GIS and the flooding evacuation path search through the huge searching space generated during the network analysis process. This research also presents an approach to these problems by utilizing a search process whose concept is derived from natural genetics. Genetic algorithms (GAs) have been introduced in the optimization problem solving area by Holland (1975) and Goldberg (1989) and have shown their usefulness through numerous applications. We apply GA and GIS to choice flooding evacuation path in metropolitan area in this study. We take the region of Shiji city in Taiwan for case. That could be divided into four parts. First, is to set the population of GA operation. Second, is to choose crossover and mutation. Third, is to calculate the fitness function of each generation and to select the better gene arrangement. Fourth, is to reproduce, after evolution, we can establish Flooding Evacuation Path that more reflect really human action and choice when flood takes place. However we can apply GA to calculate different evacuation path in different time series. Final, we compare and establish real model of evacuation path model to choosing flooding evacuation path.
series	CAADRIA
email
last changed	2022/06/07 07:52

For more results click below: