Cumincad : CUMINCAD Papers : Search Results

CumInCAD is a Cumulative Index about publications in Computer Aided Architectural Design
supported by the sibling associations ACADIA, CAADRIA, eCAADe, SIGraDi, ASCAAD and CAAD futures

PDF papers
References

Hits 1 to 20 of 570

Reformat results as: short short into frame detailed detailed into frame

_id	5cf4
id	5cf4
authors	Barrionuevo, Luis F.
year	2004
title	LOS "SPIROSPACES"
source	Proceedings of the Fourth International Conference of Mathematics & Design, Special Edition of the Journal of Mathematics & Design, Volume 4, No.1, pp. 179-187.
summary	This paper deals with “Spirospaces”. These are a conversion to the third dimension of the two dimensional geometric entities called “Spirolaterals”. Abelson, Harold, diSessa and Andera (1968) gave the first rules concerning Spirolaterals. To obtain a Spirolateral from a set of straight lines, the first of them must be one unit long and the following must be incremented one unit at each step, at the same time that they turn in a constant direction. Odds (1973) establish the variation of the rotation direction, either to the left or the right. However, he did not give a mathematical relation able to calculate open Spirolaterals. Krawczyk (2001) developed a computer program that generates Spirolaterals following the method suggested by Abelson. These are Spirolaterals obtained by enumeration without a predictive mathematical formula. Krawczyc went farther proposing Spirolaterals based in curved lines. He pointed out that there are a variety of spirolateral forms that have architectural potentiality. Following this, the architectural potentiality of Spirolaterals is the basis of this paper. To take advantage of that potentiality a computer program was implemented to generate spatial configurations based in Spirolaterals. When a third dimension is given to the Spirolaterals they become Spirospaces. These new entities need spatial and design parameters to be useful for architectural purposes. Barrionuevo and Borsetti (2001) gave results about that work establishing the concept of Spirospaces. The aim of this paper is to describe a work directed to improve rules and procedures concerning Spirospaces. It is expected that these procedures governed by the proposed rules can be employed as tools during the early steps in the architectural design process. In this work some aspects concerning Spirospaces are considered. First, Spirolaterals are presented as the predecessors of Spirospaces. Second, Spirospaces are defined, together with their structural parameters. Architectural modeling is studied at the light of two special elements of the Spirospaces: Interstitial spaces and Object spaces. Next, a computer program is presented as the appropriate tool to model configurations having architectural potentiality. Finally, the results obtained running the computer program are analyzed to determine their possible use as architectural forms. Several graphic illustrations are presented showing steps going from the exploration of spatial alternatives to the selection of a specific configuration to be developed. It is expected that the described computer program could be employed as a design aid tool. As the operation of the program generates a variety of spaces able to dwell architectural objects, it eases the search of configurations suitable to specific functions. The results obtained have the possibility of being exported to computer graphic applications able to add materials, lights and cameras.
keywords	Spirolaterals, Spirospaces, architectural spaces, interstitial spaces, objectual spaces
series	other
type	normal paper
email
last changed	2005/04/07 15:34

_id	ijac20075402
id	ijac20075402
authors	Burry, Jane R.
year	2007
title	Mindful Spaces: Computational Geometry and the Conceptual Spaces in which Designers Operate
source	International Journal of Architectural Computing vol. 5 - no. 4, pp. 611-624
summary	Combinatorial computational geometry, while dealing with geometric objects as discrete entities, provides the means both to analyse and to construct relationships between these objects and relate them to other non-geometrical entities. This paper explores some ways in which this may be used in design through a review of six, one-semester-long design explorations by undergraduate and postgraduate students in the Flexible Modeling for Design and Prototyping course between 2004 and 2007. The course focuses on using computational geometry firstly to construct topologically defined design models based on graphs of relationships between objects (parametric design,) and concurrently to output physical prototypes from these "flexible models"(an application of numerical computational geometry). It supports students to make early design explorations. Many have built flexible models to explore design iterations for a static spatial outcome. Some have built models of real time responsive dynamic systems. In this educational context, computational geometry has enabled a range of design iterations that would have been challenging to uncover through physical analogue means alone. It has, perhaps more significantly, extended the students' own concept of the space in which they design.
series	journal
email
last changed	2008/02/25 20:30

_id	2004_248
id	2004_248
authors	Chang, Teng-Wen and Woodbury, Robert F.
year	2004
title	GEOMETRY IN HIGHLY STRUCTURED DESIGN SPACES
doi	https://doi.org/10.52842/conf.ecaade.2004.248
source	Architecture in the Network Society [22nd eCAADe Conference Proceedings / ISBN 0-9541183-2-4] Copenhagen (Denmark) 15-18 September 2004, pp. 248-254
summary	The Australian branch of the SEED project created a new formalism for design spaces in which the fundamental structuring operator is information specificity, formally characterised as subsumption. Here design space navigation is composed as combinations of the primitive operators of resolution, unification, anti-unification, search, query and hysterical undo. The structures needed to support such a view are highly constrained in a mathematical sense and it is in these constraints that the problems for representation of geometry arise. The research challenge is to add the formal design space exploration constraints into an existing geometric representation scheme or alternatively to discover a new scheme in which the constraints are realized. Based on Typed Feature Structures (TFS), Geometric Typed Feature Structures (GTFS) are a representation scheme and method for performing the basic design space exploration operations on geometric objects. The crucial insight behind extending TFS to geometry is to discover useful algebraic structures of geometric objects affording the mathematics required of TFS. In this paper we describe Geometric Typed Feature Structures through one example of form: IOPSet. Our method of exposition is both mathematical and graphical: for each structure we will demonstrate both how it meets the necessary formal conditions as well as the sorts of form-sculpting operations it enables. An architectural example: insulated enclosure is used as a demonstration of subsumption operations over IOPSet. One alternative description of insulated enclosure using GTFS is also shown in the paper.
keywords	Geometric Typed Feature Structures, SEED, Design Space Explorer, Geometric Design Information
series	eCAADe
type	normal paper
email
last changed	2022/06/07 07:56

_id	0131
id	0131
authors	Chiarella, Mauro
year	2004
title	GEOMETRY AND ARCHITECTURE: NURBS, DESIGN AND CONSTRUCTION
source	Proceedings of the Fourth International Conference of Mathematics & Design, Special Edition of the Journal of Mathematics & Design, Volume 4, No.1, pp. 135-139.
summary	Geometry regarded as a tool for understanding is perhaps the part of Mathematics which is the most intuitive, concrete and linked to reality. From its roots as a tool to describe and measure shapes, geometry as ‘the space science’ , has grown towards a theory of ideas and methods by means of which it is possible to build and study idealised models, not only from the physical world but also from the real world. In graphic architecture thought, geometry usually appears as an instrumental support for project speculation. Geometric procedures are presented as representational resources for the graphic testing of reflection and for the exposition of ideas in order to build a logical order as regards representation and formal prefiguration. The fast rise of computing in the last decades has made it possible for architects to work massively and in a graphic and intuitive way with mathematical representations of tridimensional geometry, such as the NURBS . These organic surfaces of free shapes defined by vectorial curves have allowed access to a rapid generation of complex shapes with a minumum amount of data and of specific knowledge. The great development of modelling achieved by the digital media and the limitations in the technical and building areas and in the existence of materials which are coherent with the resultant shapes reveal a considerable distance between the systems of ideation and simulation characteristic of the computing era and the analogous systems of production inherited from the slow industrial development. This distance has been shortened by CAD/CAM systems, which are, however, not very accessible to the architectural field. If we incorporate to the development of these divergent media the limitations which are distinctive of the material resources and procedures of the existent local technology, the aforementioned distance seems even greater. Assuming the metaphor of living at the threshold of two ages (industrial-computing, analogical-digital, material-virtual) and the challenge of the new conceptual and operational tools in our field, we work in the mixture, with no exclusions or substitutions, proposing (by means of the development of informational complements) some alternatives of work to approach the issue under discussion from the Architecture Workshop.
keywords	Geometry, Design, NURBS, Unfolding, Pedagogy
series	other
type	normal paper
email
last changed	2005/04/07 12:51

_id	sigradi2004_317
id	sigradi2004_317
authors	Christina Araujo Paim Cardoso
year	2004
title	Formas arquitetônicas em ambiente computacional [Architectural Forms in a Computational Environment]
source	SIGraDi 2004 - [Proceedings of the 8th Iberoamerican Congress of Digital Graphics] Porte Alegre - Brasil 10-12 november 2004
summary	This article presents a proposal of analysis of the architectural formal production accomplished in computing environment, putting emphasis on the most recent experimental production found in specialized publications. This analysis shows how the introduction of the computing tools may interfere with the design process, mainly when it is the production of complex forms, non-conventional. Thus, besides the recent architectural production of several offices and / or architecture companies of international renown, architectural experiences which have been developed by architects since the introduction of the CAD systems in there production are also presented Next, it presents the possibilities of the three-dimensional modeling, by making an analysis of the current possibilities, the geometric and the procedural ones, putting enphasis on the modeling of splines, NURBS and metaballs, which proved to be appropriate for the architectural production of complex forms.
keywords	CAD technology, design, three-dimensional modeling
series	SIGRADI
email
last changed	2016/03/10 09:49

_id	20ff
id	20ff
authors	Derix, Christian
year	2004
title	Building a Synthetic Cognizer
source	Design Computation Cognition conference 2004, MIT
summary	Understanding ‘space’ as a structured and dynamic system can provide us with insight into the central concept in the architectural discourse that so far has proven to withstand theoretical framing (McLuhan 1964). The basis for this theoretical assumption is that space is not a void left by solid matter but instead an emergent quality of action and interaction between individuals and groups with a physical environment (Hillier 1996). In this way it can be described as a parallel distributed system, a self-organising entity. Extrapolating from Luhmann’s theory of social systems (Luhmann 1984), a spatial system is autonomous from its progenitors, people, but remains intangible to a human observer due to its abstract nature and therefore has to be analysed by computed entities, synthetic cognisers, with the capacity to perceive. This poster shows an attempt to use another complex system, a distributed connected algorithm based on Kohonen’s self-organising feature maps – SOM (Kohonen 1997), as a “perceptual aid” for creating geometric mappings of these spatial systems that will shed light on our understanding of space by not representing space through our usual mechanics but by constructing artificial spatial cognisers with abilities to make spatial representations of their own. This allows us to be shown novel representations that can help us to see new differences and similarities in spatial configurations.
keywords	architectural design, neural networks, cognition, representation
series	other
type	poster
email
more	http://www.springer.com/computer/ai/book/978-1-4020-2392-7
last changed	2012/09/17 21:13

_id	sigradi2006_e028c
id	sigradi2006_e028c
authors	Griffith, Kenfield; Sass, Larry and Michaud, Dennis
year	2006
title	A strategy for complex-curved building design:Design structure with Bi-lateral contouring as integrally connected ribs
source	SIGraDi 2006 - [Proceedings of the 10th Iberoamerican Congress of Digital Graphics] Santiago de Chile - Chile 21-23 November 2006, pp. 465-469
summary	Shapes in designs created by architects such as Gehry Partners (Shelden, 2002), Foster and Partners, and Kohn Peterson and Fox rely on computational processes for rationalizing complex geometry for building construction. Rationalization is the reduction of a complete geometric shape into discrete components. Unfortunately, for many architects the rationalization is limited reducing solid models to surfaces or data on spread sheets for contractors to follow. Rationalized models produced by the firms listed above do not offer strategies for construction or digital fabrication. For the physical production of CAD description an alternative to the rationalized description is needed. This paper examines the coupling of digital rationalization and digital fabrication with physical mockups (Rich, 1989). Our aim is to explore complex relationships found in early and mid stage design phases when digital fabrication is used to produce design outcomes. Results of our investigation will aid architects and engineers in addressing the complications found in the translation of design models embedded with precision to constructible geometries. We present an algorithmically based approach to design rationalization that supports physical production as well as surface production of desktop models. Our approach is an alternative to conventional rapid prototyping that builds objects by assembly of laterally sliced contours from a solid model. We explored an improved product description for rapid manufacture as bilateral contouring for structure and panelling for strength (Kolarevic, 2003). Infrastructure typically found within aerospace, automotive, and shipbuilding industries, bilateral contouring is an organized matrix of horizontal and vertical interlocking ribs evenly distributed along a surface. These structures are monocoque and semi-monocoque assemblies composed of structural ribs and skinning attached by rivets and adhesives. Alternative, bi-lateral contouring discussed is an interlocking matrix of plywood strips having integral joinery for assembly. Unlike traditional methods of building representations through malleable materials for creating tangible objects (Friedman, 2002), this approach constructs with the implication for building life-size solutions. Three algorithms are presented as examples of rationalized design production with physical results. The first algorithm [Figure 1] deconstructs an initial 2D curved form into ribbed slices to be assembled through integral connections constructed as part of the rib solution. The second algorithm [Figure 2] deconstructs curved forms of greater complexity. The algorithm walks along the surface extracting surface information along horizontal and vertical axes saving surface information resulting in a ribbed structure of slight double curvature. The final algorithm [Figure 3] is expressed as plug-in software for Rhino that deconstructs a design to components for assembly as rib structures. The plug-in also translates geometries to a flatten position for 2D fabrication. The software demonstrates the full scope of the research exploration. Studies published by Dodgson argued that innovation technology (IvT) (Dodgson, Gann, Salter, 2004) helped in solving projects like the Guggenheim in Bilbao, the leaning Tower of Pisa in Italy, and the Millennium Bridge in London. Similarly, the method discussed in this paper will aid in solving physical production problems with complex building forms. References Bentley, P.J. (Ed.). Evolutionary Design by Computers. Morgan Kaufman Publishers Inc. San Francisco, CA, 1-73 Celani, G, (2004) “From simple to complex: using AutoCAD to build generative design systems” in: L. Caldas and J. Duarte (org.) Implementations issues in generative design systems. First Intl. Conference on Design Computing and Cognition, July 2004 Dodgson M, Gann D.M., Salter A, (2004), “Impact of Innovation Technology on Engineering Problem Solving: Lessons from High Profile Public Projects,” Industrial Dynamics, Innovation and Development, 2004 Dristas, (2004) “Design Operators.” Thesis. Massachusetts Institute of Technology, Cambridge, MA, 2004 Friedman, M, (2002), Gehry Talks: Architecture + Practice, Universe Publishing, New York, NY, 2002 Kolarevic, B, (2003), Architecture in the Digital Age: Design and Manufacturing, Spon Press, London, UK, 2003 Opas J, Bochnick H, Tuomi J, (1994), “Manufacturability Analysis as a Part of CAD/CAM Integration”, Intelligent Systems in Design and Manufacturing, 261-292 Rudolph S, Alber R, (2002), “An Evolutionary Approach to the Inverse Problem in Rule-Based Design Representations”, Artificial Intelligence in Design ’02, 329-350 Rich M, (1989), Digital Mockup, American Institute of Aeronautics and Astronautics, Reston, VA, 1989 Schön, D., The Reflective Practitioner: How Professional Think in Action. Basic Books. 1983 Shelden, D, (2003), “Digital Surface Representation and the Constructability of Gehry’s Architecture.” Diss. Massachusetts Institute of Technology, Cambridge, MA, 2003 Smithers T, Conkie A, Doheny J, Logan B, Millington K, (1989), “Design as Intelligent Behaviour: An AI in Design Thesis Programme”, Artificial Intelligence in Design, 293-334 Smithers T, (2002), “Synthesis in Designing”, Artificial Intelligence in Design ’02, 3-24 Stiny, G, (1977), “Ice-ray: a note on the generation of Chinese lattice designs” Environmental and Planning B, volume 4, pp. 89-98
keywords	Digital fabrication; bilateral contouring; integral connection; complex-curve
series	SIGRADI
email
last changed	2016/03/10 09:52

_id	acadia03_040
id	acadia03_040
authors	Katherine A. Liapi, Katherine A. and Kim, Jinman
year	2003
title	A Parametric Approach to the Design of a Tensegrity Vaulted Dome for an Ephemeral Structure for the 2004 Olympics
doi	https://doi.org/10.52842/conf.acadia.2003.301
source	Connecting >> Crossroads of Digital Discourse [Proceedings of the 2003 Annual Conference of the Association for Computer Aided Design In Architecture / ISBN 1-880250-12-8] Indianapolis (Indiana) 24-27 October 2003, pp. 301-309
summary	Tensegrity, defined as “tensional integrity,” is central to the design of a semi-open exhibition space that was submitted as an entry to the international competition for the design of “Ephemeral Structures for the City of Athens,” in the context of the 2004 Olympic Games. The main feature of the proposed exhibition space is a vaulted dome composed of interconnected detachable and deployable tensegrity units. The most challenging aspect in the design of the tensegrity vault was the generation of alternative spatial configurations for form exploration and study. For this purpose a mathematical code has been developed that links all the parameters that affect the design of tensegrity vaults. The code also allows for the parametric graphical generation of the vault by displaying geometric information in a 3D environment. This paper discusses the geometric basis of the code and its usefulness in the morphological study of the tensegrity vaulted dome for the proposed ephemeral structure. The mathematical code has been shown to significantly facilitate the study of various preliminary configurations of tensegrity vaulted structures.
series	ACADIA
email
last changed	2022/06/07 07:52

_id	999e
id	999e
authors	KOUZELEAS Stelios
year	2004
title	APPLICATIONS OF ACOUSTIC AND GEOMETRIC SIMULATION OF HALLS WITH THE AID OF WITH THE AID OF ACOUSTIC SIMULATION PLATE-FORM ADAPTABLE IN A CAD SYSTEM. - (EFARMOGES AKOUSTIKHS KAI GEWMETRIKHS PROSOMOIOSHS AITHOUSWN ME TH BOHTHEIA PLATFORMAS AKOYSTIKHS PROSOMOIOSHS PROSARMOSMENHS SE SYSTHMA CAD)
source	Acoustics 2004, Hellenic Institute of Acoustics (HELINA), Aristotle University of Thessaloniki, 27-28 September 2004, Greece
summary	(pdf file in greek)- With the aid of the acoustic simulation plate-form named « CAD-Acoustic » which is developed in the context of PhD and adapted on the AutoCAD system, this paper presents the halls acoustic results (RT60) of Elmia (Sweden) and Opera of Bordeaux (France) in relation to acoustic measurements and results of other acoustic simulation software (Odeon, Epidaure). In parallel, it presents geometrical simulations of the modelised halls’ acoustic behavior, such as the 3D reflections of the acoustic rays from selected surface, the 3D view of the materials’ arrangements through surfaces’ coloring, the measurement of the selected absorbing / reflecting surfaces in m2 and the individual or massive absorption coefficients’ assignment to the surfaces. Finally, with the aid of « CAD-Acoustic » the acoustic results are compared in a graphic manner in relation to the ideal acoustic rates, a presentation which is a kind of an “ architectural translation of the acoustic results” taking into account several architectural elements.
keywords	CAD modeling, "CAD-Acoustic" software developement, Architectural acoustic simulation
series	other
type	normal paper
email
more	http://www.helina.gr/
last changed	2005/10/25 11:22

_id	ijac20032207
id	ijac20032207
authors	Liapi, Katherine A.; Kim, Jinman
year	2004
title	A Parametric Approach to the Design of Vaulted Tensegrity Networks
source	International Journal of Architectural Computing vol. 2 - no. 2
summary	Significant new research in tensegrity theory and technology encourages tensegrity’s implementation in architecture. A recently developed technology makes possible the rapid modular assembly of deployable tensegrity units, and the construction of alternate curved configurations by re-using the same modules. Although a form exploration method for tensegrity structures already exists, estimating the structure’s new geometry remains a challenge due to difficulties designers encounter in understanding and following the method’s geometric construction process. Besides, the method doesn’t address the geometry of vaulted configurations. This paper presents algorithms that link together the geometric parameters that determine the shape of tensegrity vaults by addressing different design-construction scenarios, and a software code that generates parametric models of tensegrity vaulted structures.The application of the algorithms to the morphological study of a tensegrity vaulted dome, which constituted the main feature of an entry to arecent international architectural competition, is also presented.
series	other
type	normal paper
more	http://www.multi-science.co.uk/ijac.htm
last changed	2010/05/16 09:13

_id	acadia04_100
id	acadia04_100
authors	Liapi, Katherine
year	2004
title	A computer Based System for the Design and Fabrication of Tensegrity Structures
doi	https://doi.org/10.52842/conf.acadia.2004.100
source	Fabrication: Examining the Digital Practice of Architecture [Proceedings of the 23rd Annual Conference of the Association for Computer Aided Design in Architecture and the 2004 Conference of the AIA Technology in Architectural Practice Knowledge Community / ISBN 0-9696665-2-7] Cambridge (Ontario) 8-14 November, 2004, 100-109
summary	Tensegrity structures are composed of tension compression components, where the compression components (bars) are discontinuously enclosed within continuous tensile components (cables). From an engineering point of view, a tensegrity structure is characterized by geometric non-linearity and large displacements under loading. Therefore, its prestressed shape and deformation under loading are the result of the combined effect of the geometric parameters that determine the initial configuration of the structure, the level of prestress applied to cables, and the material properties of the component members of the structure. A method for generating the initial geometric configuration of tensegrity structures composed of tensegrity units and a parametric expression of this geometry have already been developed. A novel technology that makes possible the construction of tensegrity structures from the on-site assembly of deployable tensegrity units, which are furnished with a simple mechanism that permits bar-elongation, and, as a result, an increase of the prestress applied to the cables of each unit, is also under development. Also under development is a static analysis method that takes into account the above method for prestressing cables. This paper discusses the features of a system that supports the combined geometric and structural design of tensegrity structures, and integrates a graphical interface to display: a) models of initial geometry, b) geometry of the structure after prestress and loading are applied, and c) magnitude of forces applied to the structure’s component members (bars and cables). The system also provides numerical data to be used in component fabrication, and is therefore expected to become a very valuable tool for the design and construction of tensegrity structures.
series	ACADIA
last changed	2022/06/07 07:59

_id	acadia04_176
id	acadia04_176
authors	Loukissas, Yanni and Sass, Lawrence
year	2004
title	RULEBUILDING (3D PRINTING: OPERATORS, CONSTRAINTS, SCRIPTS)
doi	https://doi.org/10.52842/conf.acadia.2004.176
source	Fabrication: Examining the Digital Practice of Architecture [Proceedings of the 23rd Annual Conference of the Association for Computer Aided Design in Architecture and the 2004 Conference of the AIA Technology in Architectural Practice Knowledge Community / ISBN 0-9696665-2-7] Cambridge (Ontario) 8-14 November, 2004, 176-185
summary	3-D printers alter the speed, cost, complexity, and consistency with which physical architecture models can be crafted. If architects are to harness the unique abilities of this modeling process, it is necessary to find a complementary means of conceptualizing designs and generating the geometric data necessary for 3-D printing. This paper introduces a novel combination of 3-D printing and scripting through three examples of architectural surface models. In these examples, VBScript is used to write generative scripts for execution within the Rhinoceros modeling environment. The scripts produce digital geometric models which, in turn, are exported to a Z-Corp 3-D printer. The merits of this methodology are demonstrated, in one example, through models of an architectural surface composed of light-modulating conical components. The design intent in this example is a grid of responsive components which ride on a complex curved surface and steer toward a light. The written script is an explicit representation of this intention. Methods in the script use external parameters to generate a digital geometric model. The form of the subsequent printed model is calculated as a function of the initial parameters, two boundary splines and a vector indicating the orientation of the light. By varying these parameters, a set of design options can be generated and 3-D printed for comparison. The combination of scripting and 3-D printing allows complex design intentions to be managed in a concise, sharable format and modeled iteratively without manual intervention.
keywords	Generative, Scripting, Rapid Prototyping, 3-D Printing, Architectural Design
series	ACADIA
type	normal paper
email
last changed	2022/06/07 07:59

_id	sigradi2004_078
id	sigradi2004_078
authors	Luisa Rodrigues Félix; Adriane Borda Almeida da Silva; Neusa Mariza Rodrigues Félix
year	2004
title	Entre béziers e nurbs: Ensino de formas livres no contexto arquitetônico [Between Béziers and Nurbs: Teaching Free Forms in an Architectural Context]
source	SIGraDi 2004 - [Proceedings of the 8th Iberoamerican Congress of Digital Graphics] Porte Alegre - Brasil 10-12 november 2004
summary	This work intends to contribute to the use of techniques to represent free forms in didactic activities. It enlarges a previous study using only one technique to represent parametric curves and surfaces. It includes the NURBS technique, without discharging the BEZIER technique used before. Some exercises were structured using both techniques to model a representative example of Architecture: the Ronchamp Chapel . architect Le Corbusier. The tasks were compared to highlight the knowledge elements existing in both activities and its necessity of enlargement to move from one to another. Its is observed that the use of different techniques, as NURBS and Bezier, emphasize the specific characteristics of the geometric entities, establishing the control of parameters for free forms in the context of architectural graphics.
series	SIGRADI
email
last changed	2016/03/10 09:55

_id	781d
id	781d
authors	Mayer, Rosirene; Turkienicz, Benamy
year	2005
title	Generative Process of Oskar Niemeyer‘s Style
source	2005 Aesthetics and Architectural Composition. Proceedings of the Dresden International Symposium of Architecture 2004 (to appear in "pro Literatur Verlag", D-82291 Mammendorf ISBN: 3-86611-022-7 / Editors: Ralf Weber/Matthias Albrecht Amann/ TU Dresden
summary	The aim of this study is to outline the structure of a possible grammar of Oscar Niemeyer’s architectural language, focusing on the so-called “free forms.” The idea is to assess the extent to which it is possible to shed some light on the discussion of architectural freedom as used by many authors when describing the work of the Brazilian architect. The investigation associates geometric relations present in Niemeyer’s buildings to the Shape Grammar model as proposed by Stiny & Gips (1975). The model made possible the depiction of consistencies in vocabulary, rules and operations deployed by Niemeyer. This eventually led to the description of an original architectural language present in Niemeyer’s buildings.
keywords	Shape Grammars, Oskar Niemeyer, Generative process
series	other
type	symposium
email
last changed	2006/10/01 08:39

_id	2004_630
id	2004_630
authors	Naai-Jung Shih, Chen-Yan Lin, and Chai-Yuan Liau
year	2004
title	A 3D Information System for the Digital Preservation of Historical Architecture
doi	https://doi.org/10.52842/conf.ecaade.2004.630
source	Architecture in the Network Society [22nd eCAADe Conference Proceedings / ISBN 0-9541183-2-4] Copenhagen (Denmark) 15-18 September 2004, pp. 630-637
summary	The purpose of this study is to build 3D models for the digital preservation of Chinese architecture. A historical architecture, the main hall of the Pao-An Temple, was scanned with a long-range 3D laser scanner. This temple is 19.68 meters wide, 18.2 meters wide, and 15.7 meters high. In total, the exterior and interior were registered into 1958 scans in order to cover the main hall. Scanned point clouds were converted into 3D computer models, sections, and boundary projections. Digital models were used as references for chronological records and comparison. Scanned components included the roof ridge, wood structure, dragon column, and a hanging flower. This research, which was sponsored by the National Science Council, created a two-way construction process, integrated geometric and image data, and established a digital reservation work process. Web pages were made to display 3D color components by using a plug-in to enable browsing of large files.
keywords	3D Laser Scanner; Historical Preservation
series	eCAADe
email
last changed	2022/06/07 07:59

_id	sigradi2004_313
id	sigradi2004_313
authors	Natalie Johanna Groetelaars; Arivaldo Leão de Amorim
year	2004
title	Levantamento fotogramétrico digital da capela de nossa senhora da escada [Digital Fotogrammetric Levantamento Does not Give Capela of Nossa Senhora Escada???]
source	SIGraDi 2004 - [Proceedings of the 8th Iberoamerican Congress of Digital Graphics] Porte Alegre - Brasil 10-12 november 2004
summary	This article describes the use of digital photogrammetric techniques for the survey of Chapel Nossa Senhora da Escada, declared heritage by IPHAN . Institute for National Artistic and Historical Heritage . in 1962. It is one of the firsts chapels built in Brazil, in the middle of sixteenth century. In this paper, we present and discuss the procedures used in this building surveying, since the planning of the measurements until the creation of the photorealistic model in PhotoModeler software. Finally, the accuracy of the 3D model is verified using control points measured by topographical methods.
keywords	Heritage documentation, digital photogrammetry, surveying, 3D geometric modeling
series	SIGRADI
email
last changed	2016/03/10 09:56

_id	11cb
id	11cb
authors	Oguzhan Özcan
year	2004
title	MATHEMATICS AND DESIGN EDUCATION
source	Proceedings of the Fourth International Conference of Mathematics & Design, Special Edition of the Journal of Mathematics & Design, Volume 4, No.1, pp. 199-203.
summary	Many people believe that mathematical thought is an essential element of creativity. The origin of this idea in art dates back to Plato. Asserting that aesthetics is based on logical and mathematical rules, Plato had noticed that geometrical forms were “forms of beauty” in his late years. Unlike his contemporaries, he had stressed that the use of geometrical forms such as lines, circles, planes, cubes in a composition would aid to form an aesthetics. The rational forms of Plato and the rules of geometry have formed the basis of antique Greek art, sculpture and architecture and have influenced art and design throughout history in varying degrees. This emphasis on geometry has continued in modern design, reflected prominently by Kandinsky’s geometric classifications . Mathematics and especially geometry have found increasing application in the computer-based design environment of our day. The computer has become the central tool in the modern design environment, replacing the brush, the paints, the pens and pencils of the artist. However, if the artist does not master the internal working of this new tool thoroughly, he can neither develop nor express his creativity. If the designer merely learns how to use a computer-based tool, he risks producing designs that appear to be created by a computer. From this perspective, many design schools have included computer courses, which teach not only the use of application programs but also programming to modify and create computer-based tools. In the current academic educational structure, different techniques are used to show the interrelationship of design and programming to students. One of the best examples in this area is an application program that attempts to teach the programming logic to design students in a simple way. One of the earliest examples of such programs is the Topdown Programming Shell developed by Mitchell, Liggett and Tan in 1988 . The Topdown system is an educational CAD tool for architectural applications, where students program in Pascal to create architectural objects. Different examples of such educational programs have appeared since then. A recent fine example of these is the book and program called “Design by Number” by John Maeda . In that book, students are led to learn programming by coding in a simple programming language to create various graphical primitives. However, visual programming is based largely on geometry and one cannot master the use of computer-based tools without a through understanding of the mathematical principles involved. Therefore, in a model for design education, computer-based application and creativity classes should be supported by "mathematics for design" courses. The definition of such a course and its application in the multimedia design program is the subject of this article.
series	other
type	normal paper
email
last changed	2005/04/07 15:36

_id	sigradi2004_033
id	sigradi2004_033
authors	Olga Maria Almeida da Silva; Adriane Borda Almeida da Silva; Neusa Mariza Rodrigues Félix
year	2004
title	Modelagem geométrica como instrumento de análise e representação de mobiliário [Geometric Modeling as Instrument for Furniture Analysis and Representation]
source	SIGraDi 2004 - [Proceedings of the 8th Iberoamerican Congress of Digital Graphics] Porte Alegre - Brasil 10-12 november 2004
summary	This work explores the Geometric Modeling possibilities as a tool for professional use to the Furniture Design by Interior Architecture professionals. It is considered that the modeling process contributes to the characterization of furniture, since it is necessary the definition of the geometric procedures to generate and control the represented form. Searching for evidences of the kind of contribution, some experiments were developed using chairs from different periods as the object for representation. Three chairs were selected to model, from three different historical periods. The modeling processes were based on the use of 3D Studio Max, registered, analyzed and compared. The results defined references to the use of Digital Graphics to support the representation and also to studies of the furniture form.
series	SIGRADI
email
last changed	2016/03/10 09:56

_id	sigradi2004_216
id	sigradi2004_216
authors	Pablo C. Grazziotin; Benamy Turkienicz; Luciano Sclovsky; Carla M. D. S. Freitas
year	2004
title	Cityzoom - A tool for the visualization of the impact of urban regulations
source	SIGraDi 2004 - [Proceedings of the 8th Iberoamerican Congress of Digital Graphics] Porte Alegre - Brasil 10-12 november 2004
summary	Visualization has been used for many years as an important way of presenting architectural design and projects. However, beyond design, planning urban areas requires the analysis of different factors. Urban regulations are planning tools used to control and/or stimulate changes in the urban structure and to reproduce a certain level of quality of the urban milieu. Land area, built area, plot rate, average building height, and other important attributes can be easily obtained from the geometric objects in the city model or explicitly associated to them. This paper presents a system, CityZoom, which integrates several performance tools that allow the simulation of different attributes related to a planned or existing city. These attributes are shown in different ways either as tables of attribute values estimated from model evaluation, or 3D scenarios where the user can navigate and observe realistic shadows and daylighting estimation based on the concept of solar envelope.
series	SIGRADI
email
last changed	2016/03/10 09:57

_id	caadria2020_363
id	caadria2020_363
authors	Pal, Abhipsa, Chan, Wi Leen, Tan, Ying Yi, Chia, Pei Zhi and Tracy, Kenneth Joseph
year	2020
title	Knit Concrete Formwork
doi	https://doi.org/10.52842/conf.caadria.2020.1.213
source	D. Holzer, W. Nakapan, A. Globa, I. Koh (eds.), RE: Anthropocene, Design in the Age of Humans - Proceedings of the 25th CAADRIA Conference - Volume 1, Chulalongkorn University, Bangkok, Thailand, 5-6 August 2020, pp. 213-222
summary	The manufacture of concrete funicular shells often relies on traditional formwork construction techniques to provide a sculptured cavity for the fluid material to occupy (Bechthold, 2004). While this enables a predictable geometric outcome, the extensive use of timber and/or steel to construct these formworks account for up to 60% of the total production cost of concrete and are discarded after the casting is complete (Lloret et al. 2014). Thus, we propose an alternative method to create prefabricated modular systems out of concrete casted in customised tubular knitted membranes. These perform as a network of struts that can be affixed onto 3D printed nodes of a singular design. Altogether, these components serve as a kit-of-parts that can be transported to site and assembled together to create shell geometries.
keywords	Knitted Textile; Fabric Formwork; Concrete Casting
series	CAADRIA
email
last changed	2022/06/07 08:00

For more results click below: