Cumincad : CUMINCAD Papers : Search Results

CumInCAD is a Cumulative Index about publications in Computer Aided Architectural Design
supported by the sibling associations ACADIA, CAADRIA, eCAADe, SIGraDi, ASCAAD and CAAD futures

PDF papers
References

Hits 1 to 20 of 572

Reformat results as: short short into frame detailed detailed into frame

_id	eaea2003_0
id	eaea2003_0
authors	Kardos, P. and Urland, U. (Eds.)
year	2004
title	SPATIAL SIMULATION AND EVALUATION - NEW TOOLS IN ARCHITECTURAL AND URBAN DESIGN
source	Proceedings of the 6th European Architectural Endoscopy Association Conference / ISBN 80-227-2088-7, 144 p.
summary	The 5th eaea Conference in Essen yielded four principal findings: • After having been limited to endoscopic picture and film renderings of analog scaled models, the european architectural endoscopy association (eaea) first bridged the gap to digital environmental simulations at this conference. It is not about a better or correct method, but a suitable method of representing the planned reality of a particular project using ways that make sense. The combination of digital and analog simulation media is a source of impetus to the user of both methods. The future belongs to the casespecific application and the numerous integration possibilities of the two different media. • In investigating the perception of pictures produced in both analog and digital form, it was ascertained that it was only after greater effort that the same level of pleasing qualities were achieved in the digital world, compared to pictures of analog scaled models. It seems that for many planning phases model-based pictures are superior to digital photos – with regards to economy, quality of representation and imaginative attributes. This last point seems to be especially important in the draft planning stages: the less sharp a picture is, the more remaining room for viewer interpretation there is. In particular, the high degree of precision characteristic of digital simulations no longer allows room for imagination in the individual viewer. • 3D environmental simulations will increasingly be incorporated with success in architecture and urban design courses at universities and colleges both here in Germany as well as abroad. The further spread of these techniques to other universities and colleges is desirable. Over and above application as a pedagogic tool, the use of these simulations by architects and city planners, private planning agencies and municipal planning administrators will also be in evidence in the future – for checking designs, for informing the involved parties, for establishing the decisions of government bodies, for marketing the project. • Also, the interactive use of endoscopic simulation facilities continually opens new fields of research – whether it be for registering subjective distance perception, whether it be for determining orientation possibilities in open spaces.
series	EAEA
type	normal paper
email
more	http://info.tuwien.ac.at/eaea
last changed	2005/09/09 10:43

_id	ascaad2004_paper6
id	ascaad2004_paper6
authors	Petzold, Frank and Dirk Donath
year	2004
title	Digital Building Surveying and Planning in Existing Building
source	eDesign in Architecture: ASCAAD's First International Conference on Computer Aided Architectural Design, 7-9 December 2004, KFUPM, Saudi Arabia
summary	For planning in existing built contexts, the building survey is the starting point for initial planning proposals, for the diagnosis and documentation of building damages, for the creation of objectives catalogues, for the detailed design of renovation and conversion measures and for ensuring fulfilment of building legislation, particularly by change of use and refitting. An examination of currently available IT-tools shows insufficient support for planning within existing contexts, most notably a deficit with regard to information capture and administration. In ongoing research at the Bauhaus-Universität Weimar (SFB524- Collaborative research center 524 “Materials and Structure in Revitalization of Buildings”) methods and techniques of revitalisation are being investigated (SFB 524, 2004). A special branch of SFB524- D2 entitled “Planning-Relevant Digital Building Surveying and Information Systems” is investigating possibilities of computer-aided building survey and communication platforms for architects and civil engineers. This paper discusses the concept for a modular surveying system (basic concept, structuring of collected data, separation of geometry from semantic data, and separation into sub-systems) and the prototypical realisation of a system for the complete support of the entire building surveying process for existing buildings. The project aims to contribute to the development of a planning system for existing buildings.
series	ASCAAD
email
last changed	2007/04/08 19:47

_id	cf2011_p157
id	cf2011_p157
authors	Boton, Conrad; Kubicki Sylvain, Halin Gilles
year	2011
title	Understanding Pre-Construction Simulation Activities to Adapt Visualization in 4D CAD Collaborative Tools
source	Computer Aided Architectural Design Futures 2011 [Proceedings of the 14th International Conference on Computer Aided Architectural Design Futures / ISBN 9782874561429] Liege (Belgium) 4-8 July 2011, pp. 477-492.
summary	Increasing productivity and efficiency is an important issue in the AEC field. This area is mainly characterized by fragmentation, heterogeneous teams with low lifetimes and many uncertainties. 4D CAD is one of the greatest innovations in recent years. It consists in linking a 3D model of the building with the works planning in order to simulate the construction evolution over time. 4D CAD can fill several needs from design to project management through constructivity analysis and tasks planning (Tommelein 2003). The literature shows that several applications have been proposed to improve the 4D CAD use (Chau et al. 2004; Lu et al. 2007; Seok & al. 2009). In addition, studies have shown the real impact of 4D CAD use in construction projects (Staub-French & Khanzode 2007; Dawood & Sika 2007). More recently, Mahalingam et al. (2010) showed that the collaborative use of 4D CAD is particularly useful during the pre-construction phase for comparing the constructability of working methods, for visually identifying conflicts and clashes (overlaps), and as visual tool for practitioners to discuss and to plan project progress. So the advantage of the 4D CAD collaborative use is demonstrated. Moreover, several studies have been conducted both in the scientific community and in the industrial world to improve it (Zhou et al. 2009; Kang et al. 2007). But an important need that remains in collaborative 4D CAD use in construction projects is about the adaptation of visualization to the users business needs. Indeed, construction projects have very specific characteristics (fragmentation, variable team, different roles from one project to another). Moreover, in the AEC field several visualization techniques can represent the same concept and actors choose one or another of these techniques according to their specific needs related to the task they have to perform. For example, the tasks planning may be represented by a Gantt chart or by a PERT network and the building elements can be depicted with a 3D model or a 2D plan. The classical view (3D + Gantt) proposed to all practitioners in the available 4D tools seems therefore not suiting the needs of all. So, our research is based on the hypothesis that adapting the visualization to individual business needs could significantly improve the collaboration. This work relies on previous ones and aim to develop a method 1) to choose the best suited views for performed tasks and 2) to compose adapted multiple views for each actor, that we call ‚Äúbusiness views‚Äù. We propose a 4 steps-method to compose business views. The first step identifies the users‚Äô business needs, defining the individual practices performed by each actor, identifying his business tasks and his information needs. The second step identifies the visualization needs related to the identified business needs. For this purpose, the user‚Äôs interactions and visualization tasks are described. This enables choosing the most appropriate visualization techniques for each need (step 3). At this step, it is important to describe the visualization techniques and to be able to compare them. Therefore, we proposed a business view metamodel. The final step (step 4) selects the adapted views, defines the coordination mechanisms and the interaction principles in order to compose coordinated visualizations. A final step consists in a validation work to ensure that the composed views really match to the described business needs. This paper presents the latest version of the method and especially presents our latest works about its first and second steps. These include making more generic the business tasks description in order to be applicable within most of construction projects and enabling to make correspondence with visualization tasks.
keywords	Pre-construction, Simulation, 4D CAD, Collaboration, Computer Supported Cooperative Work, Human-Computer Interface, Information visualization, Business view, Model driven engineering
series	CAAD Futures
email
last changed	2012/02/11 19:21

_id	2004_426
id	2004_426
authors	Carrara, Gianfranco and Fioravanti, Antonio
year	2004
title	How to Construct an Audience in Collaborative Design - The Relationship Among which Actors in the Design Process
source	Architecture in the Network Society [22nd eCAADe Conference Proceedings / ISBN 0-9541183-2-4] Copenhagen (Denmark) 15-18 September 2004, pp. 426-434
doi	https://doi.org/10.52842/conf.ecaade.2004.426
summary	The features of complexity in architectural design have now been clarified. Complexity, intrinsic in architectural work, has increased in recent years as in all other fields of human endeavour – social, economic and cultural. In the specific case of architectural design, the most significant factors in this regard consist of the large number of actors, the numerous disciplines involved, technological innovation, regulations and rules governing the design process and the various different design aims. In order to address this complex of problems, long-term research based on the Collaborative Design paradigm, CD, is now being carried out. In it, thanks to the reciprocal exchange of information, the complementary nature of the knowledge possessed by the various actors, and the contemporary nature of the design action by the various actors on the same components, positive effects are exerted on the design as a whole. The latter thus gains in coherence and in improved integration among the design solutions proposed by the various actors. In CD all the actors are involved from the outset of the design work and are helped by distributed Knowledge Bases (KBs) and Intelligent Assistants (IAs). In this case it may happen that information and knowledge automatically exchanged among KBs (through the IAs) are excessive and/or not addressed to the right actors. How can information redundancy be avoided, and how can the flow of information sent over the network be controlled? The present paper introduces and defines the concept of „Audience“, that is, the group of actors to which it is permitted to send information concerning non respected requirements and the „reduced Audience“ to which to send the knowledge needed to overcome the difficulties encountered.
keywords	Collaborative Architectural Design, Complexity, Intelligent Assistant, Context, Audience
series	eCAADe
last changed	2022/06/07 07:55

_id	ddss2008-33
id	ddss2008-33
authors	Charlton, James A.; Bob Giddings and Margaret Horne
year	2008
title	A survey of computer software for the urban designprocess
source	H.J.P. Timmermans, B. de Vries (eds.) 2008, Design & Decision Support Systems in Architecture and Urban Planning, ISBN 978-90-6814-173-3, University of Technology Eindhoven, published on CD
summary	Urban design is concerned with the shape, the surface and the physical arrangement of all kinds of urban elements, the basic components that make up the built environment, at the level of buildings, spaces and human activities. It is also concerned with the non-visual aspects of the environment, such as noise, wind and temperature and humidity. The city square is a particular urban element which can take many forms and its geometrical relationships such as maximum dimensions, ratio of width to length and building height to length have been analysed for centuries (Alberti 1475), (Vitruvius 1550), (Sitte 1889), (Corbett 2004). Within the current urban design process there are increasing examples of three dimensional computer representations which allow the user to experience a visual sense of the geometry of city squares in an urban landscape. Computer-aided design and Virtual Reality technologies have recently contributed to this visual assessment, but there have been limited attempts at 3D computer representations which allow the user to experience a greater sense of the urban space. This paper will describe a survey of computer tools which could support a more holistic approach to urban design and which could be used to simulate a number of urban texture and urban quality aspects. It will provide a systematic overview of currently available software that could support the simulation of building density, height, colour and style as well as conditions relating to noise, shading, heat, natural and artificial light. It will describe a methodology for the selection and filtering of appropriate computer applications and offer an initial evaluation of these tools for the analysis and representation of the three-dimensional geometry, urban texture and urban quality of city centre spaces. The paper is structured to include an introduction to the design criteria relating to city centre spaces which underpins this research. Next the systematic review of computer software will be described, and selected tools will undergo initial evaluation. Finally conclusions will be drawn and areas for future research identified.
keywords	Urban design, Software identification, 3D modelling, Pedestrian modelling, Wind modelling, Noise mapping, Thermal comfort, VR Engine
series	DDSS
last changed	2008/09/01 17:06

_id	112caadria2004
id	112caadria2004
authors	Chun Yu Hsieh
year	2004
title	The Emergence of Creativity in Digital Development of Architecture
source	CAADRIA 2004 [Proceedings of the 9th International Conference on Computer Aided Architectural Design Research in Asia / ISBN 89-7141-648-3] Seoul Korea 28-30 April 2004, pp. 173-188
doi	https://doi.org/10.52842/conf.caadria.2004.173
summary	Research into the various forms and processes of creativity has been a topic of great interest in the design field for many years. However, most studies avoid questioning whether digital architecture is inherently creative in a larger social context. This study proposes to use the interacting creativity model of Csiksentmihalyi as the basic structure, to establish the major criteria of testing creativity in the digital era. There are two objectives: first, whether digital architecture can pass the test in society and culture to become an architecture that embodies creativity; second, to find out the role of digital media in Csiksentmihalyi’s interacting creativity model.
series	CAADRIA
email
last changed	2022/06/07 07:56

_id	acadia04_150
id	acadia04_150
authors	Clarke, Cory
year	2004
title	The Siren's Call
source	Fabrication: Examining the Digital Practice of Architecture [Proceedings of the 23rd Annual Conference of the Association for Computer Aided Design in Architecture and the 2004 Conference of the AIA Technology in Architectural Practice Knowledge Community / ISBN 0-9696665-2-7] Cambridge (Ontario) 8-14 November, 2004, 150-161
doi	https://doi.org/10.52842/conf.acadia.2004.150
summary	This paper presents an account of our research and development of processes providing seamless transition from design to fabrication. The narrative of our design, development, and prototyping experi¬ments spans seven years, including our current project, the Trusset software/structural system. Trusset is a combined building system and agent-based software design tool. The building system is based on a differential space-truss designed for fabrication entirely with computer numerically controlled (CNC) linear cutting devices, such as laser cut¬ters or three-axis mills. The software component is a set of agent-based design tools for developing surfaces and envelopes formally suitable to be built using the space-truss structure. Developed in parallel, the soft¬ware and building components combine within the Trusset system to provide a seamless pipeline from design to fabrication and assembly. The story of the development of software components and structural system, leading to the Trusset, act as a means of discussing the larger issues framing the research: the potential pitfalls and benefits of design and fabrication integration via the computer.
keywords	Fabrication, Space-truss, Structure
series	ACADIA
email
last changed	2022/06/07 07:56

_id	ddss2004_d-253
id	ddss2004_d-253
authors	Deshpande, N., B. de Vries, and J.P. van Leeuwen
year	2004
title	Collocated, Multi-Disciplinary, Collaborative Designspace
source	Van Leeuwen, J.P. and H.J.P. Timmermans (eds.) Developments in Design & Decision Support Systems in Architecture and Urban Planning, Eindhoven: Eindhoven University of Technology, ISBN 90-6814-155-4, p. 253-268
summary	This review identifies the research findings in the area of computer mediated, collocated, multi-disciplinary collaborative design. After a general look into this and related research areas, three influencing aspects of collaborative design are reviewed. Design activities, working together, and collaborative systems that fit into various work practices. Finally, we note missing points of research in the area of collocated, multi-disciplinary, collaborative design.
keywords	Collocated Multi-Disciplinary Collaborative Design (CMCD), Shared Understanding, Computer Supported Collaborative Work (CSCW), Group Activity, Design Space, Groupware
series	DDSS
last changed	2004/07/03 22:13

_id	ascaad2004_paper18
id	ascaad2004_paper18
authors	Garba, Shaibu B.
year	2004
title	Virtual Reality Implementation in the Architecture Curriculum: The experience of King Fahd University of Petroleum and Minerals
source	eDesign in Architecture: ASCAAD's First International Conference on Computer Aided Architectural Design, 7-9 December 2004, KFUPM, Saudi Arabia
summary	Following a recent curriculum revision, the Department of Architecture at the King Fahd University of Petroleum and Minerals (KFUPM) established a Virtual Reality (VR) laboratory to service its information technology courses and research. Two years after the establishment of the laboratory, utilization has not reached the level anticipated and the facility is yet to be fully integrated into teaching and research activities. The paper reviews the implementation of the laboratory with a view to identifying and examining the factors that account for its current utilization. Factors identified in the paper included inability to fully implement the proposal for the laboratory, inadequate implementation preparation, complicated procedure for producing visualization content, and computing resource compatibility problems. The paper concludes with general suggestions for schools trying to implement virtual reality in their curriculum and specific suggestions to improve the utilization of the KFUPM VR laboratory.
series	ASCAAD
type	normal paper
email
last changed	2021/07/16 10:40

_id	104caadria2004
id	104caadria2004
authors	Henry Iskandar Ong
year	2004
title	Role of Computer Visualization As a Support for Architect-Client Design Collaboration
source	CAADRIA 2004 [Proceedings of the 9th International Conference on Computer Aided Architectural Design Research in Asia / ISBN 89-7141-648-3] Seoul Korea 28-30 April 2004, pp. 65-78
doi	https://doi.org/10.52842/conf.caadria.2004.065
summary	This paper discusses the role of computer based visual simulations in the context of bridging the communication gap between client and design team, based on years of practising architecture in the Sumatra region, Indonesia. Its principal objective is to identify steps in design process to assess the design collaboration between bodies with different culture backgrounds, so that greater understanding and agreement can occur. It also attempts to facilitate and foster effective communication which will lead to improved design collaboration practise, in a region famous for its rich vernacular architecture. Two finished projects located at different sites in North Sumatra in which the author was involved, will be included as sample cases.
series	CAADRIA
email
last changed	2022/06/07 07:49

_id	109caadria2004
id	109caadria2004
authors	Hyun-Ah Choi, Han-Jong Jun
year	2004
title	A Fundamental Study on Analysis of Interaction By Sketches and Acts of Creative Design in Architectural Design Process - Focusing on Emergent Shapes
source	CAADRIA 2004 [Proceedings of the 9th International Conference on Computer Aided Architectural Design Research in Asia / ISBN 89-7141-648-3] Seoul Korea 28-30 April 2004, pp. 133-144
doi	https://doi.org/10.52842/conf.caadria.2004.133
summary	One of the characteristics of design process in the area of architectural design is the use of a number of different types of sketches. Designers place a great deal of emphasis on sketches often because it is thought to be associated with innovation and creativity. The emphasis has come to drive researchers to increasingly focus on sketch and its role in designing. Firstly, this paper is to review closely related researches that have looked at the role of sketches in design process. And then, this study is to review analogy and emergence that can be effective in facilitating creative design. Mutational emergent shapes are introduced in the last stage.
series	CAADRIA
email
last changed	2022/06/07 07:50

_id	ijac20032110
id	ijac20032110
authors	Kvan, Thomas
year	2004
title	The Dual Heritage of CAAD Research
source	International Journal of Architectural Computing vol. 2 - no. 1
summary	The development of research in computer aided architectural design has evolved in the context of architectural design. A review of Tom Maver's work is undertaken from the perspective of his shortest paper, CAAD's Seven Deadly Sins. In that paper cautions were given to researchers. Here these cautions are interpreted in the context of the dual heritage of our field in science and creative arts. An examination of Tom Maver's own work suggests that these sins are counterbalanced by a like number of virtues and it is suggested that these are demonstrated in the corpus of his work and the community he has fostered.
series	journal
email
more	http://www.multi-science.co.uk/ijac.htm
last changed	2007/03/04 07:08

_id	caadria2004_0
id	caadria2004_0
authors	Lee, Hyun Soo and Choi, Jin Won (Eds.)
year	2004
title	CAADRIA 2004
source	Proceedings of the 9th International Conference on Computer Aided Architectural Design Research in Asia / ISBN 89-7141-648-3 / Seoul (Korea) 28-30 April 2004, 983 p.
doi	https://doi.org/10.52842/conf.caadria.2004
summary	Having as topic for the conference the tile with keywords such as culture, technology, and architecture, we were expecting to find out the relationships among those three domains, and how they are interrelated in this fast growing information society. This triangular relationship has been established based on the increasingly noticeable paradigm shift from traditional computer-aided design research in architecture to research in diverse areas such as virtual environments and communities and interactive smart spaces, including the consideration of sociocultural aspects along with the technological issues. Making virtual environments focuses on creating a new, yet virtual world where people can inhabit or visit for diverse purposes. The virtual architecture becomes a medium for diverse communications as well as digital contents for the new media industry. For example, virtual heritage projects introduce a new way of preserving historic buildings and sites. At the same time, interactive smart spaces often combine two different worlds: real and virtual worlds. Growing digital technologies enables us to create intelligent physical spaces where computers are ubiquitous and invisible in space, and thus human beings can interact with architectural spaces, not necessarily with computers directly. At this point, issues on virtual reality (VR) and human computer interactions (HCI) become architects' and designers' concerns in socio-cultural aspects. The proceedings of the Nineth International Conference on Computer-Aided Architectural Design Research in Asia, presents 74 papers which were selected from the 131 submissions through a blind review of 58 international reviewers. Each submission was reviewed by three reviewers and the final acceptance was based on their recommendations.
series	CAADRIA
more	www.caadria.org
last changed	2022/06/07 07:49

_id	cf2015_421
id	cf2015_421
authors	Miyasaka, Elza Luli and Fabrício, Márcio Minto
year	2015
title	Digital Fabrication in Brazil: Academic Production in the last decade
source	The next city - New technologies and the future of the built environment [16th International Conference CAAD Futures 2015. Sao Paulo, July 8-10, 2015. Electronic Proceedings/ ISBN 978-85-85783-53-2] Sao Paulo, Brazil, July 8-10, 2015, pp. 421-433.
summary	This work aims to review the literature on digital fabrication verifying the Brazilian status on a general view. Concerning the methodology, the research was carried out from 2004 to 2014 analyzing three aspects: 1. the situational context of digital fabrication; 2. digital fabrication in the design process; 3. the Brazilian status. The findings revealed the use of digital fabrication is mainly focused on the design process. Also, the most common objects in the research are the development of models, furniture and pavilions. Moreover, digital fabrication is increasingly being inserted in the syllabus of architecture schools. Brazil strikes in object production both in quantities and interests throughout the country.
keywords	Digital Fabrication; design production, literature / review; CAD/ CAM architecture.
series	CAAD Futures
email
last changed	2015/06/29 07:55

_id	avocaad_2003_04
id	avocaad_2003_04
authors	Rob van Helvoort
year	2003
title	Mecano - when CAAD meets ICT
source	LOCAL VALUES in a NETWORKED DESIGN WORLD - ADDED VALUE OF COMPUTER AIDED ARCHITECTURAL DESIGN, Stellingwerff, Martijn and Verbeke, Johan (Eds.), (2004) DUP Science - Delft University Press, ISBN 90-407-2507-1.
summary	For some years ICT (Information and Communication Technology) has been worldwide a hot topic and, especially in the European academic environment, a very fashionable word. No matter where the road would lead to, almost any ICT related project was welcomed as the next step towards a brand new and even better system of education. In the meantime CAAD (Computer Aided Architectural Design) plays a role of utmost importance during a range of stages in the design process or building project.In this situation a research project is set up to develop an educational environment where CAAD meets ICT. The first application was turned down as the proposed (ICT) technology wasn’t available, according to committee judging. After proving them wrong, the second application was more successful. Even though the project was set up for local values, education in CAAD and related topics in Belgium, it was situated in a networked (internet) world.After running the project for a period of two years a list of pros and cons can be made up. Moreover, both local and on a global scale, ideas have changed.
keywords	Architecture, Local values, Globalisation, Computer Aided Architectural Design
series	AVOCAAD
email
last changed	2006/01/16 21:38

_id	508caadria2004
id	508caadria2004
authors	Tomas V. Dorta
year	2004
title	Drafted Virtual Reality - A New Paradigm to Design with Computers
source	CAADRIA 2004 [Proceedings of the 9th International Conference on Computer Aided Architectural Design Research in Asia / ISBN 89-7141-648-3] Seoul Korea 28-30 April 2004, pp. 829-844
doi	https://doi.org/10.52842/conf.caadria.2004.829
summary	This paper proposes a new technique for designing spaces, called Drafted Virtual Reality (DVR), to be used in interior, architectural or industrial design. It proposes the construction of virtual panoramic environments through the QuickTime VR (QTVR) Panorama platform (Apple), starting from sketches made by hand using traditional pen-on-paper techniques. To construct these drawings, the designer uses the computer to build a graphic panoramic template. Using this technique, the designer takes advantage of both approaches, the capacities and possibilities of the computer using VR (3D environments, interaction and real-time), and those of free-hand sketches (abstraction, inaccuracy and ambiguity). These last elements are essential for the first steps of the design process in contrast to the conventional techniques of 3D modeling interacting with mouse and menus. In the development of design computer solutions, it is important to know the user well. However, most researchers propose systems very different than how designers actually work. The DVR doesn’t try to simulate analog tools by computers (digital pens), but takes advantage of hand drawn sketches created using analog techniques that are already known by designers and improved by VR visualization. A review of the implication of this technique on the design process. Not only is the technique fast and easy to learn, the results show that the designer can express their individuality and the idiosyncrasies of their personal sketches; important elements hard to achieve with conventional 3D modeling techniques. Finally, this technique can be perceived as a new paradigm in the way we work with computers in design. The limitations of interfaces and usage of current technology are seen when the designer outputs information from the system to process using other analog techniques. The proposed solution marries the existing competencies and techniques of the designer with the advantages of the computer processing. The quality of the virtual experience of this technique is consistent with current designer’s intentions within the traditional design process.
series	CAADRIA
email
last changed	2022/06/07 07:58

_id	caadria2017_182
id	caadria2017_182
authors	Austin, Matthew
year	2017
title	The Other Digital - What is the Glitch in Architecture?
source	P. Janssen, P. Loh, A. Raonic, M. A. Schnabel (eds.), Protocols, Flows, and Glitches - Proceedings of the 22nd CAADRIA Conference, Xi'an Jiaotong-Liverpool University, Suzhou, China, 5-8 April 2017, pp. 551-559
doi	https://doi.org/10.52842/conf.caadria.2017.551
summary	This paper will discuss and investigate the issues with the concept of 'glitch' in architecture. There are currently two definitions that sit in a symbiotic relationship with each other; Moradi's (2004) and Menkman's (2011). This paper will explore the implications of these two approaches, while investigating the possibility of a third, unique definition (the encoded transform), and what effect they have on the possibility for a 'glitch architecture'. The paper will then focus on the glitches' capacity to be disruptive within the design process. In the context of architecture, it has been previously argued that the inclusion of glitches within a design process can easily create a process that does not 'converge' to a desired design outcome, but instead shifts haphazardly within a set of family resemblances (Austin & Perin 2015). Further to this, it will be revealed that this 'divergent' quality of glitches is due to the encoded nature of architectural production.
keywords	Glitch aesthetics; Theory; Algorithmic Design; Process.
series	CAADRIA
email
last changed	2022/06/07 07:54

_id	ecaade2010_054
id	ecaade2010_054
authors	Wurzer, Gabriel; Fioravanti, Antonio; Loffreda, Gianluigi; Trento, Armando
year	2010
title	Function & Action: Verifying a functional program in a game-oriented environment
source	FUTURE CITIES [28th eCAADe Conference Proceedings / ISBN 978-0-9541183-9-6] ETH Zurich (Switzerland) 15-18 September 2010, pp.389-394
doi	https://doi.org/10.52842/conf.ecaade.2010.389
wos	WOS:000340629400041
summary	The finding of a functional program for any kind of building involves a great amount of knowledge about the behavior of future building users. This knowledge can be gathered by looking at relevant building literature (Adler, 1999; Neufert and Neufert, 2000) or by investigating the actual processes taking place in similar environments, the latter being demonstrated e.g. by (Schütte-Lihotzky, 2004) or new functionalist approaches of the MVRDV group (Costanzo, 2006)). Both techniques have the disadvantage that the architect might assume a behavior which is seldom experienced in real life (either through lack of information or by failing to meet the building user’s expectations). What is needed is a verification step in which the design is tested on real users. We have devised a game-like environment (Figure 1a) in which it is possible to capture the behavior of future building users in order to verify the relevance of the design even at a very early stage. As result of applying our approach, we can find previously overlooked usage situations, which may be used to further adapt the design to the user’s needs.
keywords	Requirements checking; Participative design
series	eCAADe
email
last changed	2022/06/07 07:57

_id	ascaad2004_paper14
id	ascaad2004_paper14
authors	Abdel Mohsen, Ashraf M.
year	2004
title	Future Space Cities@Universe (Digi-City Vision)
source	eDesign in Architecture: ASCAAD's First International Conference on Computer Aided Architectural Design, 7-9 December 2004, KFUPM, Saudi Arabia
summary	A template for the future city has been carved into the heavens. Ever since the beginning of humankind, we have looked to the sky for the opportunity to make a new start in our imperfect world. Between the stars and the darkness we have imagined utopias beyond the reach of our travel technologies, colonizing space with our fantasies. Now we are in the first stages of an electronic revolution, but in the future 50 years later we will be in a mega-digital era which we have to predict, work and search for the reality of that future. Our planet is recently over loaded with different problems, such as pollution, population, nature disasters. Our vast speed of technology and the curiosity of discovering the invisible, leads to study and find out the nearest Future Space Architecture. With the vast acceleration of technology and digital life, we should start to predict the future architecture on, into or behind the Earth. This paper is one of many perceptions of life and architecture behind the Earth in the digital era, Digi-City Vision.
series	ASCAAD
email
last changed	2007/04/08 19:47

_id	ascaad2004_paper11
id	ascaad2004_paper11
authors	Abdelfattah, Hesham Khairy and Ali A. Raouf
year	2004
title	No More Fear or Doubt: Electronic Architecture in Architectural Education
source	eDesign in Architecture: ASCAAD's First International Conference on Computer Aided Architectural Design, 7-9 December 2004, KFUPM, Saudi Arabia
summary	Operating electronic and Internet worked tools for Architectural education is an important, and merely a prerequisite step toward creating powerful tele-collabortion and tele-research in our Architectural studios. The design studio, as physical place and pedagogical method, is the core of architectural education. The Carnegie Endowment report on architectural education, published in 1996, identified a comparably central role for studios in schools today. Advances in CAD and visualization, combined with technologies to communicate images, data, and “live” action, now enable virtual dimensions of studio experience. Students no longer need to gather at the same time and place to tackle the same design problem. Critics can comment over the network or by e-mail, and distinguished jurors can make virtual visits without being in the same room as the pin-up—if there is a pin-up (or a room). Virtual design studios (VDS) have the potential to support collaboration over competition, diversify student experiences, and redistribute the intellectual resources of architectural education across geographic and socioeconomic divisions. The challenge is to predict whether VDS will isolate students from a sense of place and materiality, or if it will provide future architects the tools to reconcile communication environments and physical space.
series	ASCAAD
email
last changed	2007/04/08 19:47

For more results click below: