Cumincad : CUMINCAD Papers : Search Results

CumInCAD is a Cumulative Index about publications in Computer Aided Architectural Design
supported by the sibling associations ACADIA, CAADRIA, eCAADe, SIGraDi, ASCAAD and CAAD futures

PDF papers
References

Hits 1 to 20 of 572

Reformat results as: short short into frame detailed detailed into frame

_id	2004_312
id	2004_312
authors	Burry, J., Felicetti, P., Tang, J., Burry, M. and Xie, M.
year	2004
title	Dynamical Structural Modeling - A Collaborative Design Exploration
doi	https://doi.org/10.52842/conf.ecaade.2004.312
source	Architecture in the Network Society [22nd eCAADe Conference Proceedings / ISBN 0-9541183-2-4] Copenhagen (Denmark) 15-18 September 2004, pp. 312-317
summary	This paper will report on a generative performative modeling approach that engages architects and structural engineers in close dialog. We focus on knowledge shared between architects and engineers to apply the Finite Element Analysis based structural design technique Evolutionary Structural Optimization [ESO] as a way to understand or corroborate the performance factors that are significant in determining architectural form. ESO is very close conceptually to the dynamical system of matter and forces of growth itself. It has parallels both mathematical and metaphorical with natural evolution and morphogenesis so it has been poignant to apply the approach to a formal architectural case study in which the generative influence of these processes is inherent.
keywords	Evolutionary Structural Optimization; Finite Element Analysis; Architect Engineer Collaboration; Performance-Based Design; Form Finding
series	eCAADe
last changed	2022/06/07 07:54

_id	041029_duerr-c
id	041029_duerr-c
authors	Dürr, Christian
year	2004
title	MORPHOGENESIS – EVOLUTION OF SHAPE; IMAGINATION AMPLIFIER VERSION 1.0
source	ETH postgraduate studies final thesis, Zurich
summary	The advent of computer technologies in the design-processes has already taken place, is meanwhile ordinary. New design perspectives are opened, and an almost inexhaustable form repertoire is available, even buildable - ‘Nothing is impossible‘. This thesis work deals only with a small clip from there. Essentially it consists of two parts: » MORPHOGENESIS – Evolution of Shape « describes the present situation of generating shape with the help of computers. Some of the technologies that are used for, as comupter-morphing or evolutionary programming, are examined more closely here. »IMAGINATION AMPLIFIER Version 1.0« is an interactive Form-Generator for houses - a House-Machine. The program deals with the possibilities of interpolation and morphing between two, 3 dimensional, states (Startand Target-House) configured by the user. As an output–result, the generator depicts the put in number of steps in between, with characteristic values like cubical contents (V), surface quadrature (A) and the relation between V/A. All the results are stored in a database, where it is possible to select from for new morphing operations, to get in the end closer to a more optimized shape.
series	thesis:MSc
type	normal paper
last changed	2005/09/09 13:13

_id	acadia08_072
id	acadia08_072
authors	Frumar, Jerome
year	2008
title	An Energy Centric Approach to Architecture: Abstracting the material to co-rationalize design and performance
doi	https://doi.org/10.52842/conf.acadia.2008.072
source	Silicon + Skin: Biological Processes and Computation, [Proceedings of the 28th Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) / ISBN 978-0-9789463-4-0] Minneapolis 16-19 October 2008, 72-81
summary	This paper begins by exploring matter as an aggregated system of energy transactions and modulations. With this in mind, it examines the notion of energy driven form finding as a design methodology that can simultaneously negotiate physical, environmental and fabrication considerations. The digital workspace enables this notion of form finding to re-establish itself in the world of architecture through a range of analytic tools that algorithmically encode real world physics. Simulating the spatial and energetic characteristics of reality enables virtual “form generation models that recognize the laws of physics and are able to create ‘minimum’ surfaces for compression, bending [and] tension” (Cook 2004). The language of energy, common in engineering and materials science, enables a renewed trans-disciplinary dialogue that addresses significant historic disjunctions such as the professional divide between architects and engineers. Design becomes a science of exploring abstracted energy states to discover a suitable resonance with which to tune the built environment. ¶ A case study of one particular method of energy driven form finding is presented. Bi-directional Evolutionary Structural Optimization (BESO) is a generative engineering technique developed at RMIT University. It appropriates natural growth strategies to determine optimum forms that respond to structural criteria by reorganizing their topology. This dynamic topology response enables structural optimization to become an integrated component of design exploration. A sequence of investigations illustrates the flexibility and trans-disciplinary benefits of this approach. Using BESO as a tool for design rather than purely for structural optimization fuses the creative approach of the architect with the pragmatic approach of the engineer, enabling outcomes that neither profession could develop in isolation. The BESO case study alludes to future design processes that will facilitate a coherent unfolding of design logic comparable to morphogenesis.
keywords	Energy; Form-Finding; Morphogenesis; Optimization; Structure
series	ACADIA
last changed	2022/06/07 07:50

_id	6357
id	6357
authors	Bahman Kalantari
year	2004
title	POLYNOMIOGRAPHY IN ART AND DESIGN
source	Proceedings of the Fourth International Conference of Mathematics & Design, Special Edition of the Journal of Mathematics & Design, Volume 4, No.1, pp. 305-311.
summary	As polynomiography gains more recognition its potential applications in art and design will become more evident. Polynomiography is the art and science of visualization in the approximation of zeros of polynomials. In this paper we will demonstrate some of its applications in art and design and show that although its basis is mathematical, artists and designers can learn to work with it just as they do with any other artistic tool. Indeed polynomiography has enormous range of applications. Although the main products are two-dimensional images they could also inspire three-dimensional architectural deigns. The paper will demonstrate some particular applications of polynomiography, ranging from artistic designs, to carpet and fabric designs, to animation. Within the realm of art and design, polynomiography also finds many educational applications.
series	other
type	normal paper
email
last changed	2005/04/07 15:46

_id	5cf4
id	5cf4
authors	Barrionuevo, Luis F.
year	2004
title	LOS "SPIROSPACES"
source	Proceedings of the Fourth International Conference of Mathematics & Design, Special Edition of the Journal of Mathematics & Design, Volume 4, No.1, pp. 179-187.
summary	This paper deals with “Spirospaces”. These are a conversion to the third dimension of the two dimensional geometric entities called “Spirolaterals”. Abelson, Harold, diSessa and Andera (1968) gave the first rules concerning Spirolaterals. To obtain a Spirolateral from a set of straight lines, the first of them must be one unit long and the following must be incremented one unit at each step, at the same time that they turn in a constant direction. Odds (1973) establish the variation of the rotation direction, either to the left or the right. However, he did not give a mathematical relation able to calculate open Spirolaterals. Krawczyk (2001) developed a computer program that generates Spirolaterals following the method suggested by Abelson. These are Spirolaterals obtained by enumeration without a predictive mathematical formula. Krawczyc went farther proposing Spirolaterals based in curved lines. He pointed out that there are a variety of spirolateral forms that have architectural potentiality. Following this, the architectural potentiality of Spirolaterals is the basis of this paper. To take advantage of that potentiality a computer program was implemented to generate spatial configurations based in Spirolaterals. When a third dimension is given to the Spirolaterals they become Spirospaces. These new entities need spatial and design parameters to be useful for architectural purposes. Barrionuevo and Borsetti (2001) gave results about that work establishing the concept of Spirospaces. The aim of this paper is to describe a work directed to improve rules and procedures concerning Spirospaces. It is expected that these procedures governed by the proposed rules can be employed as tools during the early steps in the architectural design process. In this work some aspects concerning Spirospaces are considered. First, Spirolaterals are presented as the predecessors of Spirospaces. Second, Spirospaces are defined, together with their structural parameters. Architectural modeling is studied at the light of two special elements of the Spirospaces: Interstitial spaces and Object spaces. Next, a computer program is presented as the appropriate tool to model configurations having architectural potentiality. Finally, the results obtained running the computer program are analyzed to determine their possible use as architectural forms. Several graphic illustrations are presented showing steps going from the exploration of spatial alternatives to the selection of a specific configuration to be developed. It is expected that the described computer program could be employed as a design aid tool. As the operation of the program generates a variety of spaces able to dwell architectural objects, it eases the search of configurations suitable to specific functions. The results obtained have the possibility of being exported to computer graphic applications able to add materials, lights and cameras.
keywords	Spirolaterals, Spirospaces, architectural spaces, interstitial spaces, objectual spaces
series	other
type	normal paper
email
last changed	2005/04/07 15:34

_id	2004_248
id	2004_248
authors	Chang, Teng-Wen and Woodbury, Robert F.
year	2004
title	GEOMETRY IN HIGHLY STRUCTURED DESIGN SPACES
doi	https://doi.org/10.52842/conf.ecaade.2004.248
source	Architecture in the Network Society [22nd eCAADe Conference Proceedings / ISBN 0-9541183-2-4] Copenhagen (Denmark) 15-18 September 2004, pp. 248-254
summary	The Australian branch of the SEED project created a new formalism for design spaces in which the fundamental structuring operator is information specificity, formally characterised as subsumption. Here design space navigation is composed as combinations of the primitive operators of resolution, unification, anti-unification, search, query and hysterical undo. The structures needed to support such a view are highly constrained in a mathematical sense and it is in these constraints that the problems for representation of geometry arise. The research challenge is to add the formal design space exploration constraints into an existing geometric representation scheme or alternatively to discover a new scheme in which the constraints are realized. Based on Typed Feature Structures (TFS), Geometric Typed Feature Structures (GTFS) are a representation scheme and method for performing the basic design space exploration operations on geometric objects. The crucial insight behind extending TFS to geometry is to discover useful algebraic structures of geometric objects affording the mathematics required of TFS. In this paper we describe Geometric Typed Feature Structures through one example of form: IOPSet. Our method of exposition is both mathematical and graphical: for each structure we will demonstrate both how it meets the necessary formal conditions as well as the sorts of form-sculpting operations it enables. An architectural example: insulated enclosure is used as a demonstration of subsumption operations over IOPSet. One alternative description of insulated enclosure using GTFS is also shown in the paper.
keywords	Geometric Typed Feature Structures, SEED, Design Space Explorer, Geometric Design Information
series	eCAADe
type	normal paper
email
last changed	2022/06/07 07:56

_id	0131
id	0131
authors	Chiarella, Mauro
year	2004
title	GEOMETRY AND ARCHITECTURE: NURBS, DESIGN AND CONSTRUCTION
source	Proceedings of the Fourth International Conference of Mathematics & Design, Special Edition of the Journal of Mathematics & Design, Volume 4, No.1, pp. 135-139.
summary	Geometry regarded as a tool for understanding is perhaps the part of Mathematics which is the most intuitive, concrete and linked to reality. From its roots as a tool to describe and measure shapes, geometry as ‘the space science’ , has grown towards a theory of ideas and methods by means of which it is possible to build and study idealised models, not only from the physical world but also from the real world. In graphic architecture thought, geometry usually appears as an instrumental support for project speculation. Geometric procedures are presented as representational resources for the graphic testing of reflection and for the exposition of ideas in order to build a logical order as regards representation and formal prefiguration. The fast rise of computing in the last decades has made it possible for architects to work massively and in a graphic and intuitive way with mathematical representations of tridimensional geometry, such as the NURBS . These organic surfaces of free shapes defined by vectorial curves have allowed access to a rapid generation of complex shapes with a minumum amount of data and of specific knowledge. The great development of modelling achieved by the digital media and the limitations in the technical and building areas and in the existence of materials which are coherent with the resultant shapes reveal a considerable distance between the systems of ideation and simulation characteristic of the computing era and the analogous systems of production inherited from the slow industrial development. This distance has been shortened by CAD/CAM systems, which are, however, not very accessible to the architectural field. If we incorporate to the development of these divergent media the limitations which are distinctive of the material resources and procedures of the existent local technology, the aforementioned distance seems even greater. Assuming the metaphor of living at the threshold of two ages (industrial-computing, analogical-digital, material-virtual) and the challenge of the new conceptual and operational tools in our field, we work in the mixture, with no exclusions or substitutions, proposing (by means of the development of informational complements) some alternatives of work to approach the issue under discussion from the Architecture Workshop.
keywords	Geometry, Design, NURBS, Unfolding, Pedagogy
series	other
type	normal paper
email
last changed	2005/04/07 12:51

_id	112caadria2004
id	112caadria2004
authors	Chun Yu Hsieh
year	2004
title	The Emergence of Creativity in Digital Development of Architecture
doi	https://doi.org/10.52842/conf.caadria.2004.173
source	CAADRIA 2004 [Proceedings of the 9th International Conference on Computer Aided Architectural Design Research in Asia / ISBN 89-7141-648-3] Seoul Korea 28-30 April 2004, pp. 173-188
summary	Research into the various forms and processes of creativity has been a topic of great interest in the design field for many years. However, most studies avoid questioning whether digital architecture is inherently creative in a larger social context. This study proposes to use the interacting creativity model of Csiksentmihalyi as the basic structure, to establish the major criteria of testing creativity in the digital era. There are two objectives: first, whether digital architecture can pass the test in society and culture to become an architecture that embodies creativity; second, to find out the role of digital media in Csiksentmihalyi’s interacting creativity model.
series	CAADRIA
email
last changed	2022/06/07 07:56

_id	2836
id	2836
authors	Dunham, Douglas
year	2004
title	COMPUTER DESIGN OF REPEATING HYPERBOLIC PATTERNS
source	Proceedings of the Fourth International Conference of Mathematics & Design, Special Edition of the Journal of Mathematics & Design, Volume 4, No.1, pp. 83-90.
summary	From antiquity, humans have created 2-dimensional art on flat surfaces (the Euclidean plane) and on surfaces of spheres. However, it wasn't until about 50 years ago that designers have created art in the third "classical geometry", the hyperbolic plane. Inspired by a diagram from the mathematician H. S. M. Coxeter, the graphic artist M. C. Escher became the first person to design such patterns, performing all the needed constructions laboriously by hand. In order to exhibit the true hyperbolic nature of such art, the pattern must exhibit symmetry and repetition. It seems natural to use a computer to avoid the tedious hand constructions performed by Escher. This was our goal: to design and implement a computer program to create repeating hyperbolic patterns.
series	other
type	normal paper
email
last changed	2005/04/07 12:49

_id	sigradi2004_404
id	sigradi2004_404
authors	Eduardo Lyon
year	2004
title	Artificial intelligence and emergence in architecture: A multi-agent based model for design processes
source	SIGraDi 2004 - [Proceedings of the 8th Iberoamerican Congress of Digital Graphics] Porte Alegre - Brasil 10-12 november 2004
summary	The purpose of this paper is to provide an alternative approach to traditional design process formulation and elaboration. In contrast to traditional models of design process fundamentally defined by the abstract manipulation of objects, this study recognizes that the resources available for rethinking architecture are to be found in a reformulation of its theory and practice. This reformulation should be based on non-linear design processes in which dynamic emergence and invention take the place of a linear design process fixed on a particular object evolution. Design is possible to be defined in two different and commonly confused ways; one as the process of designing or design activity and the second as the product of designing. In this study, we are concerned with design as a process to emphasize the misconceptions, derived from studying design products solely. Therefore, we propose a change from a design knowledge based on objects to a one focused on design as a network of processes.
series	SIGRADI
email
last changed	2016/03/10 09:51

_id	fa6e
id	fa6e
authors	Escayola, Rosa María; Bauleo, Silvina A.; Diez, Leonardo Pablo
year	2004
title	DISTANCE TEACHING OF MATHEMATICS FOR STUDENTS OF ARCHITECTURE: IS IT POSSIBLE?
source	Proceedings of the Fourth International Conference of Mathematics & Design, Special Edition of the Journal of Mathematics & Design, Volume 4, No.1, pp. 105-109.
summary	On the basis of our experience as teachers of Mathematics in the School of Architecture of the University of Buenos Aires and with the support of an expert designer of image and sound, we undertook the task of distance teaching the subject Mathematics II for students of Architecture. The academic guidance of Ms Spinadel, PhD, the university’s authorization and the support of a computer platform provided by Nueva Internet S.A. have enabled the completion of this project. We were encouraged to set up the distance teaching of the subject by the many advantages the system offers, namely, the chance for students to work at home with a computer-based platform containing all of the subject’s contents and to integrate and apply all the knowledge acquired in architectural contexts; and the chance for teachers to offer on-line guidance and tutorials. Distance teaching is not to be understood or configured as an accumulation of calculus procedures. Rather, it should be thought of as having the major aim of promoting the full development of the students’ imagination for the solution of architectural design problems. For that purpose, students must become familiar with the interface to be used as the virtual classroom, read the theoretical introduction to every one of the units, solve application problems (the students are provided with all the material, which they can visualize on line or print), and send their tutor all the queries they may have so that the process of teaching and learning is facilitated and enriched. The solution to exercises is presented in a didactic manner and students can resort to additional bibliography, image and formula galleries and a technical help forum provided by the software firm. A virtual classroom has been set up where students and teachers interact all the time. Students must also submit integrative assignments, which are corrected by the tutor and will form part of the subject’s final assessment, together with an in-person exam at the end of the semester. Excellent results have been obtained so far, being that this is the first time a subject of the Architecture course is taught this way. This paper is intended to share this experience and show how, in spite of the modality of the subject, the interaction achieved between students and teachers has proved to be very enriching.
series	other
type	normal paper
email
last changed	2005/04/07 12:50

_id	e90c
id	e90c
authors	Greenfield, Gary R.
year	2004
title	AUTOMATED RECOLORING OF EVOLVED DESIGNS
source	Proceedings of the Fourth International Conference of Mathematics & Design, Special Edition of the Journal of Mathematics & Design, Volume 4, No.1, pp. 47-54.
summary	We consider the problem of automating the recoloring of designs whose “originals” are defined using color look-up tables. Given a digital image , we assume for each pixel of there exists an integer index such that . If is a color look-up table of size , we say image is colored by if each pixel is assigned color . Given a map from to itself, we recolor by assigning to each pixel the color . We are able to evolve the recoloring maps by representing them as -tuples. We automate their evolution by applying multi-objective optimization. Examples of recolorings of designs that were originally in color and originally in black and white are given. Keywords. Color look-up table, image recoloring, genetic algorithm, evolutionary multiobjective optimization.
series	other
type	normal paper
email
last changed	2005/04/07 12:47

_id	109caadria2004
id	109caadria2004
authors	Hyun-Ah Choi, Han-Jong Jun
year	2004
title	A Fundamental Study on Analysis of Interaction By Sketches and Acts of Creative Design in Architectural Design Process - Focusing on Emergent Shapes
doi	https://doi.org/10.52842/conf.caadria.2004.133
source	CAADRIA 2004 [Proceedings of the 9th International Conference on Computer Aided Architectural Design Research in Asia / ISBN 89-7141-648-3] Seoul Korea 28-30 April 2004, pp. 133-144
summary	One of the characteristics of design process in the area of architectural design is the use of a number of different types of sketches. Designers place a great deal of emphasis on sketches often because it is thought to be associated with innovation and creativity. The emphasis has come to drive researchers to increasingly focus on sketch and its role in designing. Firstly, this paper is to review closely related researches that have looked at the role of sketches in design process. And then, this study is to review analogy and emergence that can be effective in facilitating creative design. Mutational emergent shapes are introduced in the last stage.
series	CAADRIA
email
last changed	2022/06/07 07:50

_id	916b
id	916b
authors	Janusz Rebielak
year	2004
title	SHAPING OF STRUCTURAL SYSTEMS OF HIGH-RISE BUILDINGS
source	Proceedings of the Fourth International Conference of Mathematics & Design, Special Edition of the Journal of Mathematics & Design, Volume 4, No.1, pp. 341-350.
summary	Design of an efficient and suitably rigid support structure of a tall building is constantly a challenge for architects and engineers. Recently this challenge is enormously increased by the safety requirements conditioned by numerous emergency reasons. Among others one should mention here about effects of fire or a terrorist attack. The complex forms of structural systems have to be examined in many ways. Comprehensive analyses of these systems are carried out by application of suitable numerical models of these systems. The paper contains examples of shapes of structural systems proposed by the author together with definitions of their numerical models prepared in the programming language Formian.
series	other
type	normal paper
email
last changed	2005/04/07 15:47

_id	41f0
id	41f0
authors	Janusz Rebielak
year	2004
title	NUMERICAL MODELS OF CHOSEN TYPES OF DOME STRUCTURES
source	Proceedings of the Fourth International Conference of Mathematics & Design, Special Edition of the Journal of Mathematics & Design, Volume 4, No.1, pp. 239-249.
summary	The paper presents basic description of shaping processes of tension-strut structures developed by the author and proposed as lightweight structural systems for large span dome covers. In the paper are presented two basic types of the systems, which are built mainly by means of tetrahedral and octahedral modules with the V-shaped bar sets. For all the offered types of structures there are prepared suitable numerical models defined in the programming language Formian. Application of these numerical models considerably accelerates design process of these complex forms of spatial structures and makes possible an easier co-operation between all designers involved in this process.
series	other
type	normal paper
email
last changed	2005/04/08 17:17

_id	9e09
id	9e09
authors	June-Hao Hou
year	2004
title	SURF_TM: A SURFACE SYNTHESIZER FOR ARCHITECTURAL FORMS
source	Proceedings of the Fourth International Conference of Mathematics & Design, Special Edition of the Journal of Mathematics & Design, Volume 4, No.1, pp. 359-369.
summary	Parametric equation is one of the possible ways to generate free-form architecture in modern age. When working with mathematical software, designers need a way to bring surface mesh to CAD for further design. Surf_TM is an supplemental tool for AutoCAD to import and manipulate surface mesh data from Mathcad. Accompanying with a course taught in Harvard Design School, students gain knowledge in mathematics and use parametric equation as a design tool. This paper elaborates details of the course, the tool, how they work together, and example applications.
series	other
type	normal paper
email
last changed	2005/04/07 15:49

_id	59ff
id	59ff
authors	MacPherson, Deborah L.
year	2004
title	PERCEIVING DESIGN IN VIRTUAL SPACES
source	Proceedings of the Fourth International Conference of Mathematics & Design, Special Edition of the Journal of Mathematics & Design, Volume 4, No.1, pp. 271-281.
summary	People used to illustrate our ideas by hand and now we use machines. But we still can’t search through all the world’s drawings and ideas by proportion, aesthetic, and a list of measurements and space requirements. Suppose there was a new way to communicate with our machines that would allow design and other subtle relationships to be measured, compared and perceived using the design intent and viewers interpretations themselves as descriptions? In the future, using a system like this will eventually create so many designs, interpretations, patterns and spaces to choose from the questions become: how would design be perceived within these virtual spaces; and how might our aesthetics change due to this new dialogue with machines?
series	other
type	normal paper
email
last changed	2005/04/07 15:41

_id	bfa9
id	bfa9
authors	Mahiques, Myriam Beatriz
year	2004
title	BUENOS AIRES: URBAN QUADRILLE AND FRACTALITY UNDER THE LIGHT OF SOCIAL ASPECTS
source	Proceedings of the Fourth International Conference of Mathematics & Design, Special Edition of the Journal of Mathematics & Design, Volume 4, No.1, pp. 55-59.
summary	Investigations about urban form are developed in many directions, being the history branch the strongest. It is based on the importance of forms created by previous generations. So, urban morphologists must examine the inhabitants and the processes that originate the urban form. In our discipline, ´´epistemological physicalism´´ is studied through the theory of complex systems and chaos theory. The resultant shape is obtained by selecting some elements of the abstract structure considered (non Euclidean geometry) and simulation software is used for experimentation, like L Systems, Diffusion Limited Aggregated, Cellular Automata. Then we have to discover what is veiled at first sight and to reflect on the optimal model for the community.
series	other
type	normal paper
email
last changed	2005/04/07 12:48

_id	acadia05_024
id	acadia05_024
authors	Mathew, Anijo
year	2005
title	Smart Homes for the Rural Population: New Challenges and Opportunities
doi	https://doi.org/10.52842/conf.acadia.2005.024
source	Smart Architecture: Integration of Digital and Building Technologies [Proceedings of the 2005 Annual Conference of the Association for Computer Aided Design In Architecture / ISBN 0-9772832-0-8] Savannah (Georgia) 13-16 October 2005, pp. 24-35
summary	“Smart” Homes (domestic environments in which we are surrounded by interconnected technologies that are more or less responsive to our presence and actions) seem increasingly plausible with the emergence of powerful mobile computing devices and real time context aware computing (Edwards and Grinter, 2001). Research at premier technology universities have given birth to home “labs” that experiment with sensors, cameras and monitors to study physical, behavioral and social consequences of such technologies on occupants of such homes. One of the most important problems that “smart” homes will eventually help to address is that of spiraling costs of healthcare. Using ubiquitous technologies to motivate healthy decisions can help prevent the onset of myriad medical problems (Intille, 2004). Moving the focus of attention from the health centers and hospitals to the working home through such technology interventions would eventually lead to decreased financial pressure on the traditional healthcare system. This paper examines the challenges and opportunities in the design of “smart” technologies for preventive healthcare in rural homes. It summarizes findings from current ethnographic and demographic studies; and examines other contemporary research in the field of ubiquitous computing and “smart” homes. With the help of these studies, the paper lists different technical, social and functional challenges that we as designers may have to consider before designing “smart” homes for rural populations.
series	ACADIA
email
last changed	2022/06/07 07:58

_id	791e
id	791e
authors	Monreal, Amadeo; Jacas, Joan
year	2004
title	COMPUTER AIDED GENERATION OF ARCHITECTURAL TYPOLOGIES
source	Proceedings of the Fourth International Conference of Mathematics & Design, Special Edition of the Journal of Mathematics & Design, Volume 4, No.1, pp. 73-82.
summary	The work we present may be considered as the consolidation of a methodology that was already outlined in the paper presented in the second M&D congress held in San Sebastian (1998). We establish that, in architectural design, the computer is only used in the last step in order to achieve the traditional Euclidean design in a more precise and comfortable way and to improve the quality of the handmade designs. Our proposal consists in modifying the process from the very beginning of the creative act. That is, when the design conception is born. If we want to obtain the maximum benefit of the computer possibilities, we ought to support this conception by means of a language tuned with the mentioned tool. Due to the fact that the internal language used by the computer for producing graphics is mathematical, we must incorporate, in some way, this language in the codification of the creative process. In accordance with this setting, we propose a mathematical grammar for the design based on the construction of modulated standard mathematical functions. This grammar is developed independently from the graphical software and it is specified only when a particular computer program for the effective generation on the graphical objects is selected.
series	other
type	normal paper
email
last changed	2005/04/07 12:49

For more results click below: