Cumincad : CUMINCAD Papers : Search Results

CumInCAD is a Cumulative Index about publications in Computer Aided Architectural Design
supported by the sibling associations ACADIA, CAADRIA, eCAADe, SIGraDi, ASCAAD and CAAD futures

PDF papers
References

Hits 1 to 20 of 480

Reformat results as: short short into frame detailed detailed into frame

_id	ascaad2004_paper12
id	ascaad2004_paper12
authors	Al-Qawasmi, Jamal
year	2004
title	Reflections on e-Design: The e-Studio Experience
source	eDesign in Architecture: ASCAAD's First International Conference on Computer Aided Architectural Design, 7-9 December 2004, KFUPM, Saudi Arabia
summary	The influence of digital media and information technology on architectural design education and practice is increasingly evident. The practice and learning of architecture is increasingly aided by and dependant on digital media. Digital technologies not only provide new production methods, but also expand our abilities to create, explore, manipulate and compose space. In contemporary design education, there is a continuous demand to deliver new skills in digital media and to rethink architectural design education in the light of the new developments in digital technology. During the academic years 2001-2003, I had the chance to lead the efforts to promote an effective use of digital media for design education at Department of Architecture, Jordan University of Science and Technology (JUST). Architectural curriculum at JUST dedicated much time for teaching computing skills. However, in this curriculum, digital media was taught in the form of "software use" education. In this context, digital media is perceived and used mainly as a presentation tool. Furthermore, Computer Aided Architectural Design and architectural design are taught in separate courses without interactions between the two.
series	ASCAAD
email
last changed	2007/04/08 19:47

_id	acadia07_174
id	acadia07_174
authors	Bontemps, Arnaud; Potvin, André; Demers, Claude
year	2007
title	The Dynamics of Physical Ambiences
doi	https://doi.org/10.52842/conf.acadia.2007.174
source	Expanding Bodies: Art • Cities• Environment [Proceedings of the 27th Annual Conference of the Association for Computer Aided Design in Architecture / ISBN 978-0-9780978-6-8] Halifax (Nova Scotia) 1-7 October 2007, 174-181
summary	This research proposes to support the reading of physical ambiences by the development of a representational technique which compiles, in a numerical interface, two types of data: sensory and filmic. These data are recorded through the use of a portable array equipped with sensors (Potvin 1997, 2002, 2004) as well as the acquisition of Video information of the moving environment. The compilation of information is carried out through a multi-media approach, by means of a program converting the environmental data into dynamic diagrams, as well as the creation of an interactive interface allowing a possible diffusion on the Web. This technique, named APMAP/Video, makes it possible to read out simultaneously spatial and environmental diversity. It is demonstrated through surveys taken at various seasons and time of the day at the new Caisse de dépôt et de placement headquarters in Montreal which is also the corpus for a SSHRC (Social Sciences and Humanities Research Council) research grant on Environmental Adaptability in Architecture (Potvin et al. 2003-2007). This case study shows that the technique can prove of great relevance for POEs (Post Occupancy Evaluation) as well as for assistance in a new design project.
series	ACADIA
email
last changed	2022/06/07 07:54

_id	eaea2003_15-breen
id	eaea2003_15-breen
authors	Breen, J. and Giro, H.
year	2004
title	The DXI Experience. Ten Years of Design Visualization Developments in an Educational Laboratory Context
source	Spatial Simulation and Evaluation - New Tools in Architectural and Urban Design [Proceedings of the 6th European Architectural Endoscopy Association Conference / ISBN 80-227-2088-7], pp. 71-77
summary	Design visualisation is an essential aspect of virtually every form of design enquiry. The effects of potential environmental interventions may be simulated in order to gain the types of insights, which cannot be acquired easily from two-dimensional notations. Three-dimensional representations may be generated for very different reasons. The most direct form of design imaging is traditionally for the benefit of the designer him/herself, in order to test whether the working concepts offer fitting solutions to the complex array of design conditions such as context, programme and feasibility. Alternately, images may be generated for the benefit of communication, in order to offer insights into the expected workings of a particular proposal (possibly including alternatives). This may lead to greater understanding and possibly to reaching consensus amongst different ‘actors’ involved in the design and realisation process. In many cases the results of such visualisation studies contribute to ‘bridging the gap’ between the professionals and other parties involved more indirectly in design decision-making or the appraisal of the proposals. Designers can use distinctly different methods when going about such imaging procedures. Their choices for particular techniques may depend on their familiarity or the availability of certain media devices. Being confronted with new modelling and/or visualisation instruments can stimulate the interest in fresh approaches. In this respect, the design education environment can play an important role in not only teaching ‘proven’ applications to future designers, but also in creating a platform for the active development of innovative approaches to the design visualisation practices: education as a ‘laboratory’ for new insights and potentially a ‘breeding ground’ for the extension of the designer’s instrumentation. This contribution documents the experiences gained in some ten years within an educational application, involving active use of design driven media applications. The emphasis lies on the evolvement of techniques for eye-level imaging, whereby use can be made of different types of models: physical scale models as well as digital, virtual models. Changing attitudes towards dynamic and serial vision are considered, whereby storyboard approaches on the level of integral presentation are considered. By analysing a selection of cases and their underlying approaches an indication is given of the changing attitudes and combinations of multimedia techniques, which offer opportunities to design visualisation and communication.
series	EAEA
more	http://info.tuwien.ac.at/eaea
last changed	2005/09/09 10:43

_id	eaea2003_25-ws-breen
id	eaea2003_25-ws-breen
authors	Breen, J.
year	2004
title	Towards a Virtual Design Media Museum. Identifying, Structuring and Presenting Design and (Re) Presentation Media Artifacts
source	Spatial Simulation and Evaluation - New Tools in Architectural and Urban Design [Proceedings of the 6th European Architectural Endoscopy Association Conference / ISBN 80-227-2088-7], pp. 122-132
summary	Designing is largely a process of (inter)active imaging. The evolvement of a design concept from preliminary design proposal towards spatial and material environment generally follows an uncertain path through uncharted landscape; a journey of exploration which requires both rational and creative consideration, frequently involving the interchange of information within a design team and collaboration with representatives from different contributing disciplines. Designs are conceived, worked out and specified step by step (roughly speaking from ‘rough to fine’) in iterative design ‘loops’. All the time the designer tries to determine which ‘course’ should be taken, by considering reference material, by reflecting on conceptions developed previously and by generating specific options aimed at furthering the ‘concretisation’ of the end product. In the course of such a trajectory, visual information is continually being developed, selected, tested, and subsequently either discarded or perfected. From early times architects have been considered not only as knowledgeable ‘experts’ in the field of building as a craft, but also as ‘creative directors’ of such development processes. The architect should be capable of not only conjuring up visions of the future spatial and material form of the building, but also of conveying these to the other ‘actors’ involved in the initiation and building process. Such ‘sharing’ of information is necessary in order to generate sufficient understanding, consensus, enthusiasm, as well as means. To become more than ‘figments of the imagination’, the designer’s ideas need to be ‘pinned down’ (even if they are not yet entirely finished) and communicated by using some form of reliable – and preferably readable – ‘language’ for design development and communication.
series	EAEA
more	http://info.tuwien.ac.at/eaea
last changed	2005/09/09 10:43

_id	2004_530
id	2004_530
authors	Breen, Jack
year	2004
title	Changing Roles for (Multi)Media Tools in Design - Assessing Developments and Applications of (Multi)Media Techniques in Design Education, Practice and Research
doi	https://doi.org/10.52842/conf.ecaade.2004.530
source	Architecture in the Network Society [22nd eCAADe Conference Proceedings / ISBN 0-9541183-2-4] Copenhagen (Denmark) 15-18 September 2004, pp. 530-539
summary	This contribution explores the continued evolvement of the instruments of design in relation to practice and education (and potentially: research) and attempts to characterize the effects brought about by recent media ‘shifts’. For this purpose a framework has been established to identify and ‘map’ relevant design media. The relationships between various ‘traditional’ media and computer based applications are scrutinized and characterized and the opportunities which they offer are compared. The underlying conceptual framework was recently put before a group of professionals in the in the course of an experimental workshop concerning the potentials of a virtual design media ‘museum’. In the following step an attempt is made to identify changing media roles, whereby the opportunities of the educational environment – as a ‘laboratory’ for emerging developments – is stressed. Some specific tendencies are identified, notably: the combined application of different sorts of design media; the surfacing of imaginative new working methods inspired by ‘classic’ media techniques and various new ways of escaping the serious limitations of traditional computer interfaces. These developments, making use of various types of computer platforms, may be expected to contribute to more structured – and imaginative – approaches to professional design as well as to architectural education and research.
keywords	Computer Support For Learning; The Changing Role of the Design Studio; Educational Methodologies
series	eCAADe
email
last changed	2022/06/07 07:54

_id	2004_387
id	2004_387
authors	Cheng, Nancy
year	2004
title	Stroke Sequence in Digital Sketching
doi	https://doi.org/10.52842/conf.ecaade.2004.387
source	Architecture in the Network Society [22nd eCAADe Conference Proceedings / ISBN 0-9541183-2-4] Copenhagen (Denmark) 15-18 September 2004, pp. 387-393
summary	This paper explains how to use animated drawings created with a commercial portable pen to understand and teach design process. By recording and replaying pen strokes, the Logitech Io digital pen allows us to examine the drawing process. We have been using the pen to collect expert drawings, analyse the techniques and then teach drawing strategies. The software’s animation timeline engages viewers by giving narrative sequence to a drawing, revealing sub-steps of the design or drawing process for interactive examination and discussion. The timeline allows viewers to pull apart layers of information, revealing initial strokes of complicated drawings, separating overlaid corrections and facilitating stroke counting for protocol analysis. In the classroom, students can see a variety of expert drawing techniques, use the pen in class and then immediately compare animated versions of their own efforts and expert examples. The ease of collecting new examples makes it possible to widen the range of examples to unconventional techniques.
keywords	Drawing, Design Process And Media, Digital Design Tools, Teaching
series	eCAADe
type	normal paper
email
last changed	2022/06/07 07:55

_id	0131
id	0131
authors	Chiarella, Mauro
year	2004
title	GEOMETRY AND ARCHITECTURE: NURBS, DESIGN AND CONSTRUCTION
source	Proceedings of the Fourth International Conference of Mathematics & Design, Special Edition of the Journal of Mathematics & Design, Volume 4, No.1, pp. 135-139.
summary	Geometry regarded as a tool for understanding is perhaps the part of Mathematics which is the most intuitive, concrete and linked to reality. From its roots as a tool to describe and measure shapes, geometry as ‘the space science’ , has grown towards a theory of ideas and methods by means of which it is possible to build and study idealised models, not only from the physical world but also from the real world. In graphic architecture thought, geometry usually appears as an instrumental support for project speculation. Geometric procedures are presented as representational resources for the graphic testing of reflection and for the exposition of ideas in order to build a logical order as regards representation and formal prefiguration. The fast rise of computing in the last decades has made it possible for architects to work massively and in a graphic and intuitive way with mathematical representations of tridimensional geometry, such as the NURBS . These organic surfaces of free shapes defined by vectorial curves have allowed access to a rapid generation of complex shapes with a minumum amount of data and of specific knowledge. The great development of modelling achieved by the digital media and the limitations in the technical and building areas and in the existence of materials which are coherent with the resultant shapes reveal a considerable distance between the systems of ideation and simulation characteristic of the computing era and the analogous systems of production inherited from the slow industrial development. This distance has been shortened by CAD/CAM systems, which are, however, not very accessible to the architectural field. If we incorporate to the development of these divergent media the limitations which are distinctive of the material resources and procedures of the existent local technology, the aforementioned distance seems even greater. Assuming the metaphor of living at the threshold of two ages (industrial-computing, analogical-digital, material-virtual) and the challenge of the new conceptual and operational tools in our field, we work in the mixture, with no exclusions or substitutions, proposing (by means of the development of informational complements) some alternatives of work to approach the issue under discussion from the Architecture Workshop.
keywords	Geometry, Design, NURBS, Unfolding, Pedagogy
series	other
type	normal paper
email
last changed	2005/04/07 12:51

_id	2004_459
id	2004_459
authors	Cinelis, Gintaris and Scevinskas, Kestutis
year	2004
title	Education of Professional Computing Competence in University
doi	https://doi.org/10.52842/conf.ecaade.2004.459
source	Architecture in the Network Society [22nd eCAADe Conference Proceedings / ISBN 0-9541183-2-4] Copenhagen (Denmark) 15-18 September 2004, pp. 459-465
summary	Developments in the field of computer science and architecture are leading to the new relationships between these two areas, which influence architectural education, and practice. The contemporary architectural design process in its individuality and uncertainty is characterized by the integration of different media and design instruments. There is an urgent need for architecture schools to recognize the value and use of the computer as an essential tool in the teaching and practicing architects’ activities. This paper describes the results of experiment, which concerns new policy and objectives for teaching CAAD. The experiment also outlines relationship between the lecturing in CAAD and the use of CAAD in architectural projects. We discuss the problems and opportunities in teaching architecture students the CAAD and with the CAAD.
keywords	Computer Aided Architectural Design, Architectural Education, Professional Computing Competence
series	eCAADe
last changed	2022/06/07 07:52

_id	sigradi2004_185
id	sigradi2004_185
authors	Fábio Araújo; Jose dos Santos Cabral Filho
year	2004
title	Espacialização de ambientes virtuais de imersão ñ convergência entre arquitetura real e digital [Spatialization of Immersive Virtual Environments - The Convergence between Real and Digital Architecture]
source	SIGraDi 2004 - [Proceedings of the 8th Iberoamerican Congress of Digital Graphics] Porte Alegre - Brasil 10-12 november 2004
summary	This research paper deals with the Information Technology and its close and increasing relation with the dwelling spaces in search for new and more accurate environments in real, tectonics spaces in architecture promoting new ways of living and dealing with space. This work has great importance since it is generally noticed straight convergence between architecture and the state of the art digital medias. Working through interactive digital media system attached to physical environments the paper also discuss the real sense of production and insertion of these new medias in the architecture environs and which kind of qualification is gained in these spaces through out this event.
keywords	Information technology, physical (real) spaces, interactivity
series	SIGRADI
email
last changed	2016/03/10 09:52

_id	sigradi2004_339
id	sigradi2004_339
authors	Guto Requena
year	2004
title	Habitação e novas mídias: Equipamentos e seus usos no habitar contemporâneo [Dwelling and New Media: Equipment and its Uses in Contemporary Dwelling]
source	SIGraDi 2004 - [Proceedings of the 8th Iberoamerican Congress of Digital Graphics] Porte Alegre - Brasil 10-12 november 2004
summary	The residential automation seems to be one more of the characteristics from the influence of new media in the domestic daily. The research .Habitation and New Medias: Equipment and its uses in contemporary dwelling. searched to understand the situation of the residential automation in Brazil, looking for indications of transformations in the space of the habitation contemporary and in the society.s ways of life, establishing a critical vision on the technological euphoria and new happened paradigms of the conceptual universe of the virtuality.
keywords	Residential automation, domestic space, virtuality, new media
series	SIGRADI
email
last changed	2016/03/10 09:53

_id	2004_500
id	2004_500
authors	Hanzl, Malgorzata and Wrona, Stefan
year	2004
title	Visual Simulation as a Tool for Planning Education - Computer Aided Participation Support
doi	https://doi.org/10.52842/conf.ecaade.2004.500
source	Architecture in the Network Society [22nd eCAADe Conference Proceedings / ISBN 0-9541183-2-4] Copenhagen (Denmark) 15-18 September 2004, pp. 500-507
summary	Contemporary computer techniques offer many new opportunities to engage citizens into the planning process. There are new possibilities of interaction, introducing an observer into the “game”. The research project presented in the paper assumes the use of a visual 3D language which consists of a series of schematic types of buildings. They form a language which is easy to understand both by professionals and by laymen. Understanding is the very first step towards getting convinced by the ideas presented. The next step is interaction - the user’s action induces the response of the system. The solution proposed by the user meets an evaluation from the part of the system which evokes the user’s interest - in the case presented here the evaluation introduces the simulation of future state of the site. The problem posed is to find out the best way to convince people that some places are less or more suitable for settlement, depending on the media present there, distance from the urban areas and the environment protection. The attempt to create a tool which could be helpful in an educational process is described in the paper. The idea is to prepare a form of a master plan record which uses the visual 3D language and may be accessed via World Wide Web pages. The paper formulates the assessments for the software described above and examines the possibility to create an application. The trial to prepare a web based service using the flash and shockwave technology is presented.
series	eCAADe
email
last changed	2022/06/07 07:49

_id	cf2009_poster_09
id	cf2009_poster_09
authors	Hsu, Yin-Cheng
year	2009
title	Lego Free-Form? Towards a Modularized Free-Form Construction
source	T. Tidafi and T. Dorta (eds) Joining Languages Cultures and Visions: CAADFutures 2009 CD-Rom
summary	Design Media is the tool designers use for concept realization (Schon and Wiggins, 1992; Liu, 1996). Design thinking of designers is deeply effected by the media they tend to use (Zevi, 1981; Liu, 1996; Lim, 2003). Historically, architecture is influenced by the design media that were available within that era (Liu, 1996; Porter and Neale, 2000; Smith, 2004). From the 2D plans first used in ancient egypt, to the 3D physical models that came about during the Renaissance period, architecture reflects the media used for design. When breakthroughs in CAD/CAM technologies were brought to the world in the twentieth century, new possibilities opened up for architects.
keywords	CAD/CAM free-form construction, modularization
series	CAAD Futures
type	poster
last changed	2009/07/08 22:12

_id	acadia04_270
id	acadia04_270
authors	Iwamoto, Lisa
year	2004
title	Embodied Fabrication: Computer Aided Spacemaking
doi	https://doi.org/10.52842/conf.acadia.2004.270
source	Fabrication: Examining the Digital Practice of Architecture [Proceedings of the 23rd Annual Conference of the Association for Computer Aided Design in Architecture and the 2004 Conference of the AIA Technology in Architectural Practice Knowledge Community / ISBN 0-9696665-2-7] Cambridge (Ontario) 8-14 November, 2004, 270-281
summary	This paper discusses work from two digital fabrication seminars taught at the University of California Berkeley: Fabricating Space and Thick Skinned. The full-scale installations explore relationships among the body, digital design, and making. They combine investigations of perceptual and spatial effects with digital modeling processes and full-scale CNC fabrication, focusing in particular on how new media practices forge alternative methods of representing and constructing corporeal and sensorial experience.
keywords	CAD/CAM, body, perception
series	ACADIA
email
last changed	2022/06/07 07:50

_id	eaea2003_0
id	eaea2003_0
authors	Kardos, P. and Urland, U. (Eds.)
year	2004
title	SPATIAL SIMULATION AND EVALUATION - NEW TOOLS IN ARCHITECTURAL AND URBAN DESIGN
source	Proceedings of the 6th European Architectural Endoscopy Association Conference / ISBN 80-227-2088-7, 144 p.
summary	The 5th eaea Conference in Essen yielded four principal findings: • After having been limited to endoscopic picture and film renderings of analog scaled models, the european architectural endoscopy association (eaea) first bridged the gap to digital environmental simulations at this conference. It is not about a better or correct method, but a suitable method of representing the planned reality of a particular project using ways that make sense. The combination of digital and analog simulation media is a source of impetus to the user of both methods. The future belongs to the casespecific application and the numerous integration possibilities of the two different media. • In investigating the perception of pictures produced in both analog and digital form, it was ascertained that it was only after greater effort that the same level of pleasing qualities were achieved in the digital world, compared to pictures of analog scaled models. It seems that for many planning phases model-based pictures are superior to digital photos – with regards to economy, quality of representation and imaginative attributes. This last point seems to be especially important in the draft planning stages: the less sharp a picture is, the more remaining room for viewer interpretation there is. In particular, the high degree of precision characteristic of digital simulations no longer allows room for imagination in the individual viewer. • 3D environmental simulations will increasingly be incorporated with success in architecture and urban design courses at universities and colleges both here in Germany as well as abroad. The further spread of these techniques to other universities and colleges is desirable. Over and above application as a pedagogic tool, the use of these simulations by architects and city planners, private planning agencies and municipal planning administrators will also be in evidence in the future – for checking designs, for informing the involved parties, for establishing the decisions of government bodies, for marketing the project. • Also, the interactive use of endoscopic simulation facilities continually opens new fields of research – whether it be for registering subjective distance perception, whether it be for determining orientation possibilities in open spaces.
series	EAEA
type	normal paper
email
more	http://info.tuwien.ac.at/eaea
last changed	2005/09/09 10:43

_id	2005_147
id	2005_147
authors	Lai, Ih-Cheng
year	2005
title	Infilling Time into Space - A Pedagogical Approach for Evolving Space Using Digital Media
doi	https://doi.org/10.52842/conf.ecaade.2005.147
source	Digital Design: The Quest for New Paradigms [23nd eCAADe Conference Proceedings / ISBN 0-9541183-3-2] Lisbon (Portugal) 21-24 September 2005, pp. 147-154
summary	This paper presents a pedagogical approach to explore the relationships between time and space by using digital media. Based on a pedagogical model called e-Space proposed by Lai (2004), we apply motion as a spatial issue to approach this study. Through integrating with the characteristics of digital media, students are encouraged to evolve architectural space and form by decomposing, re-organizing, interpreting and realizing the spatial composition. Simultaneously, diverse digital media applications integrated with design thinking in a design process enables students to bridge two design spaces - physical and virtual. This process introduces the students to a new approach of design-creation and form finding. Finally, we use an advanced digital media course as an example to understand the impacts of the pedagogical approach. The students’ outcomes are also reported in this paper
keywords	Digital Media, Pedagogy, Motion, Design Space, Design Learning
series	eCAADe
email
last changed	2022/06/07 07:52

_id	caadria2004_0
id	caadria2004_0
authors	Lee, Hyun Soo and Choi, Jin Won (Eds.)
year	2004
title	CAADRIA 2004
doi	https://doi.org/10.52842/conf.caadria.2004
source	Proceedings of the 9th International Conference on Computer Aided Architectural Design Research in Asia / ISBN 89-7141-648-3 / Seoul (Korea) 28-30 April 2004, 983 p.
summary	Having as topic for the conference the tile with keywords such as culture, technology, and architecture, we were expecting to find out the relationships among those three domains, and how they are interrelated in this fast growing information society. This triangular relationship has been established based on the increasingly noticeable paradigm shift from traditional computer-aided design research in architecture to research in diverse areas such as virtual environments and communities and interactive smart spaces, including the consideration of sociocultural aspects along with the technological issues. Making virtual environments focuses on creating a new, yet virtual world where people can inhabit or visit for diverse purposes. The virtual architecture becomes a medium for diverse communications as well as digital contents for the new media industry. For example, virtual heritage projects introduce a new way of preserving historic buildings and sites. At the same time, interactive smart spaces often combine two different worlds: real and virtual worlds. Growing digital technologies enables us to create intelligent physical spaces where computers are ubiquitous and invisible in space, and thus human beings can interact with architectural spaces, not necessarily with computers directly. At this point, issues on virtual reality (VR) and human computer interactions (HCI) become architects' and designers' concerns in socio-cultural aspects. The proceedings of the Nineth International Conference on Computer-Aided Architectural Design Research in Asia, presents 74 papers which were selected from the 131 submissions through a blind review of 58 international reviewers. Each submission was reviewed by three reviewers and the final acceptance was based on their recommendations.
series	CAADRIA
more	www.caadria.org
last changed	2022/06/07 07:49

_id	caadria2005_b_5c_b
id	caadria2005_b_5c_b
authors	Martin Tamke
year	2005
title	Crossing The Media
doi	https://doi.org/10.52842/conf.caadria.2005.364
source	CAADRIA 2005 [Proceedings of the 10th International Conference on Computer Aided Architectural Design Research in Asia / ISBN 89-7141-648-3] New Delhi (India) 28-30 April 2005, vol. 2, pp. 364-374
summary	An open-ended, diversified and critical approach of architectural design, using different form of ideas representation might offer best chances to gain new spatial solutions. Today’s most forward architects and designer are aware of this and make full use of physical and digital media during the process of design. During the summer term 2004 the experiment ‘Crossing the Media’ took place at the Technical University of Braunschweig. The main goal of this practical oriented seminar has been the exploration of the interface between analogue and digital Media within the design process. Both techniques, analogue and digital, were used in an experimental way and their interaction and adaptability in the field of architecture was analyzed. The work examines the possibility of a consistent integration of digital and physical representation in a design process and the individual benefits of each. In order to achieve this, we made up a stringent line of digital-analogue and analogue-digital (DA-AD) Technologies for our design experiment. During the examination we focused especially on the creative potential of the techniques used, their interaction and adaptability in the field of architecture. Hence one of the goals of the occupation with the digital analogue interfaces was the examination of the emerging shift within the structure during the process, the imprints of technology. This paper describes the workflow and tools that were used, our practical experiences with analogue digital interface and the emerging questions and impulses to architects future work and theory. The discovered limitations and consequences of interfaces between the analogue and digital realm of design and their creative chances will be revealed. We share results which we think are helpful to others, and we highlight areas where further research is necessary.
series	CAADRIA
email
last changed	2022/06/07 07:59

_id	sigradi2004_387
id	sigradi2004_387
authors	Patricia Laura Muñoz
year	2004
title	El sentido de los recursos didácticos digitales [The Meaning of Digital Didactic Resources]
source	SIGraDi 2004 - [Proceedings of the 8th Iberoamerican Congress of Digital Graphics] Porte Alegre - Brasil 10-12 november 2004
summary	The purpose of this work was to delineate the sense of using instructional applications with digital media, not to replace but to support the activities of the courses of morphology for Industrial Design. On this occasion we concentrated only on explanatory material. We found out that there are two main features that justify the application of these new media. They are constituent aspects of them: density and flexibility. Density is obtained through the multiple representations that digital media enable. Flexibility allows us to bring these representations together in alternative narrations, according to the different requirements of our teaching activities. An educational application, in order to be educational, should be dynamic and changing, defying the idea of an optimized and unique way of reaching comprehension. So, an intentional use of digital media becomes a powerful and accessible tool to make this happen.
keywords	Flexibility, Morphology, Hybridity
series	SIGRADI
email
last changed	2016/03/10 09:57

_id	acadia07_074
id	acadia07_074
authors	Peters, Brady
year	2007
title	The Smithsonian Courtyard Enclosure: A Case-Study of Digital Design Processes
doi	https://doi.org/10.52842/conf.acadia.2007.074
source	Expanding Bodies: Art • Cities• Environment [Proceedings of the 27th Annual Conference of the Association for Computer Aided Design in Architecture / ISBN 978-0-9780978-6-8] Halifax (Nova Scotia) 1-7 October 2007, 74-83
summary	This paper outlines the processes involved in the design of the Smithsonian Institution’s Patent Office Building’s new courtyard enclosure. In 2004, Foster + Partners won an invited international competition to design the new courtyard enclosure in Washington, D.C. Early in the project, the Specialist Modelling Group (SMG), an internal research and design consultancy, was brought in to advise the project team on computer modelling techniques, develop new digital design tools, and help solve the complex geometric issues involved. Throughout the project, computer programming was used as one of the primary tools to explore design options. The design constraints were encoded within a system of associated geometries. This set-out geometry performed as a mechanism to control the parameters of a generative script. The design evolution involved the use of many different media and techniques and there was an intense dialog between a large team and many consultants. The computer script was a synthesis of the design ideas and was constantly modified and adapted during the design process. The close collaboration between architects, consultants, and fabricators was of key importance to the success of the project. This project, now named The Robert and Arlene Kogod Courtyard, will complete in late 2007.
series	ACADIA
email
last changed	2022/06/07 08:00

_id	ascaad2007_036
id	ascaad2007_036
authors	Pratini, E.F.
year	2007
title	Experimental Tools for the Teaching of Technical Graphics and Improving Visualization
source	Em‘body’ing Virtual Architecture: The Third International Conference of the Arab Society for Computer Aided Architectural Design (ASCAAD 2007), 28-30 November 2007, Alexandria, Egypt, pp. 457-468
summary	This paper presents an updated evaluation of an experience of applying computer graphics, virtual reality and Internet resources in the teaching of technical graphics at the University of Brasilia, Brazil. It differs from a previous paper (Pratini, 2004) for the addition of an overview of the course, the context and the new teaching methodology. It is an extended, more detailed paper, which includes examples, and closes with some results of surveys on the didactic material and the methodology. Our motivation for this experiment is the fact that most of the students have a lack of previous knowledge on the basis of drawings, resulting difficulties in both understanding and visualizing technical drawings. In this experiment, we introduced VRML 3D modeling in addition to CAD and regular pencil-and-paper drawings study and practice. To support the learning of this broad knowledge not present in the technical graphics bibliography, we first provided a website with animations and virtual reality resources. Since 2003 we are providing a CD-ROM containing all the former website material which is updated each semester. At the present time, the CD-ROM contains almost all the needed didactic material and software for the one semester technical graphics course. This experience was intended to improve and to support learning in a way that motivates the students, young people who are used to play video and computer games. Classes, website and CD-ROM material were conceived to take advantage of computers´ interactivity and animated resources. The use of computers´ technology and new media to support the learning resulted a new methodology and several new unanswered questions.
series	ASCAAD
email
last changed	2008/01/21 22:00

For more results click below: