Cumincad : CUMINCAD Papers : Search Results

CumInCAD is a Cumulative Index about publications in Computer Aided Architectural Design
supported by the sibling associations ACADIA, CAADRIA, eCAADe, SIGraDi, ASCAAD and CAAD futures

PDF papers
References

Hits 1 to 20 of 572

Reformat results as: short short into frame detailed detailed into frame

_id	acadia16_140
id	acadia16_140
authors	Nejur, Andrei; Steinfeld, Kyle
year	2016
title	Ivy: Bringing a Weighted-Mesh Representations to Bear on Generative Architectural Design Applications
doi	https://doi.org/10.52842/conf.acadia.2016.140
source	ACADIA // 2016: POSTHUMAN FRONTIERS: Data, Designers, and Cognitive Machines [Proceedings of the 36th Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) ISBN 978-0-692-77095-5] Ann Arbor 27-29 October, 2016, pp. 140-151
summary	Mesh segmentation has become an important and well-researched topic in computational geometry in recent years (Agathos et al. 2008). As a result, a number of new approaches have been developed that have led to innovations in a diverse set of problems in computer graphics (CG) (Sharmir 2008). Specifically, a range of effective methods for the division of a mesh have recently been proposed, including by K-means (Shlafman et al. 2002), graph cuts (Golovinskiy and Funkhouser 2008; Katz and Tal 2003), hierarchical clustering (Garland et al. 2001; Gelfand and Guibas 2004; Golovinskiy and Funkhouser 2008), primitive fitting (Athene et al. 2004), random walks (Lai et al.), core extraction (Katz et al.) tubular multi-scale analysis (Mortara et al. 2004), spectral clustering (Liu and Zhang 2004), and critical point analysis (Lin et al. 20070, all of which depend upon a weighted graph representation, typically the dual of a given mesh (Sharmir 2008). While these approaches have been proven effective within the narrowly defined domains of application for which they have been developed (Chen 2009), they have not been brought to bear on wider classes of problems in fields outside of CG, specifically on problems relevant to generative architectural design. Given the widespread use of meshes and the utility of segmentation in GAD, by surveying the relevant and recently matured approaches to mesh segmentation in CG that share a common representation of the mesh dual, this paper identifies and takes steps to address a heretofore unrealized transfer of technology that would resolve a missed opportunity for both subject areas. Meshes are often employed by architectural designers for purposes that are distinct from and present a unique set of requirements in relation to similar applications that have enjoyed more focused study in computer science. This paper presents a survey of similar applications, including thin-sheet fabrication (Mitani and Suzuki 2004), rendering optimization (Garland et al. 2001), 3D mesh compression (Taubin et al. 1998), morphin (Shapira et al. 2008) and mesh simplification (Kalvin and Taylor 1996), and distinguish the requirements of these applications from those presented by GAD, including non-refinement in advance of the constraining of mesh geometry to planar-quad faces, and the ability to address a diversity of mesh features that may or may not be preserved. Following this survey of existing approaches and unmet needs, the authors assert that if a generalized framework for working with graph representations of meshes is developed, allowing for the interactive adjustment of edge weights, then the recent developments in mesh segmentation may be better brought to bear on GAD problems. This paper presents work toward the development of just such a framework, implemented as a plug-in for the visual programming environment Grasshopper.
keywords	tool-building, design simulation, fabrication, computation, megalith
series	ACADIA
type	paper
email
last changed	2022/06/07 07:58

_id	ddss2004_ra-247
id	ddss2004_ra-247
authors	Bi, G. and B. Medjdoub
year	2004
title	Hybrid Approach to Solve Space Planning Problems in Building Services
source	Van Leeuwen, J.P. and H.J.P. Timmermans (eds.) Recent Advances in Design & Decision Support Systems in Architecture and Urban Planning, Dordrecht: Kluwer Academic Publishers, ISBN: 1-4020-2408-8, p. 247-261
summary	In this paper an object-based CAD programming is used to take advantage of standardization to handle the schematic design, sizing, layout for services in a building ceiling void. From the specification of the building 3D model, our software proceeds through different steps; from the determination of the standard number and size of fan coils to the generation of 3D solutions. In order to deal with more complex geometry and larger problems, we have used a hybrid approach: Case Based Reasoning (CBR) within Constraint Satisfaction Problem (CSP) approaches. In practice, engineers in building services use previous solutions and adapt them to new problems. CBR mirrors this practical approach and does help us to deal with increasingly complex geometry effectively, and meanwhile CSP has been used for layout adaptation. The results have shown that it is possible to define and implement standard solutions to produce designs comparable with current practice. The benchmarking exercise has underlined many advantages and made some suggestions for further development. This project is funded by The Engineering and Physical Sciences Research Council (EPSRC) in UK.
keywords	Case-Based Reasoning, Constraint Satisfaction Problem, Ceiling Voids Layout, Complex Geometry, Large Problem
series	DDSS
last changed	2004/07/03 22:13

_id	sigradi2006_e028c
id	sigradi2006_e028c
authors	Griffith, Kenfield; Sass, Larry and Michaud, Dennis
year	2006
title	A strategy for complex-curved building design:Design structure with Bi-lateral contouring as integrally connected ribs
source	SIGraDi 2006 - [Proceedings of the 10th Iberoamerican Congress of Digital Graphics] Santiago de Chile - Chile 21-23 November 2006, pp. 465-469
summary	Shapes in designs created by architects such as Gehry Partners (Shelden, 2002), Foster and Partners, and Kohn Peterson and Fox rely on computational processes for rationalizing complex geometry for building construction. Rationalization is the reduction of a complete geometric shape into discrete components. Unfortunately, for many architects the rationalization is limited reducing solid models to surfaces or data on spread sheets for contractors to follow. Rationalized models produced by the firms listed above do not offer strategies for construction or digital fabrication. For the physical production of CAD description an alternative to the rationalized description is needed. This paper examines the coupling of digital rationalization and digital fabrication with physical mockups (Rich, 1989). Our aim is to explore complex relationships found in early and mid stage design phases when digital fabrication is used to produce design outcomes. Results of our investigation will aid architects and engineers in addressing the complications found in the translation of design models embedded with precision to constructible geometries. We present an algorithmically based approach to design rationalization that supports physical production as well as surface production of desktop models. Our approach is an alternative to conventional rapid prototyping that builds objects by assembly of laterally sliced contours from a solid model. We explored an improved product description for rapid manufacture as bilateral contouring for structure and panelling for strength (Kolarevic, 2003). Infrastructure typically found within aerospace, automotive, and shipbuilding industries, bilateral contouring is an organized matrix of horizontal and vertical interlocking ribs evenly distributed along a surface. These structures are monocoque and semi-monocoque assemblies composed of structural ribs and skinning attached by rivets and adhesives. Alternative, bi-lateral contouring discussed is an interlocking matrix of plywood strips having integral joinery for assembly. Unlike traditional methods of building representations through malleable materials for creating tangible objects (Friedman, 2002), this approach constructs with the implication for building life-size solutions. Three algorithms are presented as examples of rationalized design production with physical results. The first algorithm [Figure 1] deconstructs an initial 2D curved form into ribbed slices to be assembled through integral connections constructed as part of the rib solution. The second algorithm [Figure 2] deconstructs curved forms of greater complexity. The algorithm walks along the surface extracting surface information along horizontal and vertical axes saving surface information resulting in a ribbed structure of slight double curvature. The final algorithm [Figure 3] is expressed as plug-in software for Rhino that deconstructs a design to components for assembly as rib structures. The plug-in also translates geometries to a flatten position for 2D fabrication. The software demonstrates the full scope of the research exploration. Studies published by Dodgson argued that innovation technology (IvT) (Dodgson, Gann, Salter, 2004) helped in solving projects like the Guggenheim in Bilbao, the leaning Tower of Pisa in Italy, and the Millennium Bridge in London. Similarly, the method discussed in this paper will aid in solving physical production problems with complex building forms. References Bentley, P.J. (Ed.). Evolutionary Design by Computers. Morgan Kaufman Publishers Inc. San Francisco, CA, 1-73 Celani, G, (2004) “From simple to complex: using AutoCAD to build generative design systems” in: L. Caldas and J. Duarte (org.) Implementations issues in generative design systems. First Intl. Conference on Design Computing and Cognition, July 2004 Dodgson M, Gann D.M., Salter A, (2004), “Impact of Innovation Technology on Engineering Problem Solving: Lessons from High Profile Public Projects,” Industrial Dynamics, Innovation and Development, 2004 Dristas, (2004) “Design Operators.” Thesis. Massachusetts Institute of Technology, Cambridge, MA, 2004 Friedman, M, (2002), Gehry Talks: Architecture + Practice, Universe Publishing, New York, NY, 2002 Kolarevic, B, (2003), Architecture in the Digital Age: Design and Manufacturing, Spon Press, London, UK, 2003 Opas J, Bochnick H, Tuomi J, (1994), “Manufacturability Analysis as a Part of CAD/CAM Integration”, Intelligent Systems in Design and Manufacturing, 261-292 Rudolph S, Alber R, (2002), “An Evolutionary Approach to the Inverse Problem in Rule-Based Design Representations”, Artificial Intelligence in Design ’02, 329-350 Rich M, (1989), Digital Mockup, American Institute of Aeronautics and Astronautics, Reston, VA, 1989 Schön, D., The Reflective Practitioner: How Professional Think in Action. Basic Books. 1983 Shelden, D, (2003), “Digital Surface Representation and the Constructability of Gehry’s Architecture.” Diss. Massachusetts Institute of Technology, Cambridge, MA, 2003 Smithers T, Conkie A, Doheny J, Logan B, Millington K, (1989), “Design as Intelligent Behaviour: An AI in Design Thesis Programme”, Artificial Intelligence in Design, 293-334 Smithers T, (2002), “Synthesis in Designing”, Artificial Intelligence in Design ’02, 3-24 Stiny, G, (1977), “Ice-ray: a note on the generation of Chinese lattice designs” Environmental and Planning B, volume 4, pp. 89-98
keywords	Digital fabrication; bilateral contouring; integral connection; complex-curve
series	SIGRADI
email
last changed	2016/03/10 09:52

_id	sigradi2006_e131c
id	sigradi2006_e131c
authors	Ataman, Osman
year	2006
title	Toward New Wall Systems: Lighter, Stronger, Versatile
source	SIGraDi 2006 - [Proceedings of the 10th Iberoamerican Congress of Digital Graphics] Santiago de Chile - Chile 21-23 November 2006, pp. 248-253
summary	Recent developments in digital technologies and smart materials have created new opportunities and are suggesting significant changes in the way we design and build architecture. Traditionally, however, there has always been a gap between the new technologies and their applications into other areas. Even though, most technological innovations hold the promise to transform the building industry and the architecture within, and although, there have been some limited attempts in this area recently; to date architecture has failed to utilize the vast amount of accumulated technological knowledge and innovations to significantly transform the industry. Consequently, the applications of new technologies to architecture remain remote and inadequate. One of the main reasons of this problem is economical. Architecture is still seen and operated as a sub-service to the Construction industry and it does not seem to be feasible to apply recent innovations in Building Technology area. Another reason lies at the heart of architectural education. Architectural education does not follow technological innovations (Watson 1997), and that “design and technology issues are trivialized by their segregation from one another” (Fernandez 2004). The final reason is practicality and this one is partially related to the previous reasons. The history of architecture is full of visions for revolutionizing building technology, ideas that failed to achieve commercial practicality. Although, there have been some adaptations in this area recently, the improvements in architecture reflect only incremental progress, not the significant discoveries needed to transform the industry. However, architectural innovations and movements have often been generated by the advances of building materials, such as the impact of steel in the last and reinforced concrete in this century. There have been some scattered attempts of the creation of new materials and systems but currently they are mainly used for limited remote applications and mostly for aesthetic purposes. We believe a new architectural material class is needed which will merge digital and material technologies, embedded in architectural spaces and play a significant role in the way we use and experience architecture. As a principle element of architecture, technology has allowed for the wall to become an increasingly dynamic component of the built environment. The traditional connotations and objectives related to the wall are being redefined: static becomes fluid, opaque becomes transparent, barrier becomes filter and boundary becomes borderless. Combining smart materials, intelligent systems, engineering, and art can create a component that does not just support and define but significantly enhances the architectural space. This paper presents an ongoing research project about the development of new class of architectural wall system by incorporating distributed sensors and macroelectronics directly into the building environment. This type of composite, which is a representative example of an even broader class of smart architectural material, has the potential to change the design and function of an architectural structure or living environment. As of today, this kind of composite does not exist. Once completed, this will be the first technology on its own. We believe this study will lay the fundamental groundwork for a new paradigm in surface engineering that may be of considerable significance in architecture, building and construction industry, and materials science.
keywords	Digital; Material; Wall; Electronics
series	SIGRADI
email
last changed	2016/03/10 09:47

_id	eaea2003_15-breen
id	eaea2003_15-breen
authors	Breen, J. and Giro, H.
year	2004
title	The DXI Experience. Ten Years of Design Visualization Developments in an Educational Laboratory Context
source	Spatial Simulation and Evaluation - New Tools in Architectural and Urban Design [Proceedings of the 6th European Architectural Endoscopy Association Conference / ISBN 80-227-2088-7], pp. 71-77
summary	Design visualisation is an essential aspect of virtually every form of design enquiry. The effects of potential environmental interventions may be simulated in order to gain the types of insights, which cannot be acquired easily from two-dimensional notations. Three-dimensional representations may be generated for very different reasons. The most direct form of design imaging is traditionally for the benefit of the designer him/herself, in order to test whether the working concepts offer fitting solutions to the complex array of design conditions such as context, programme and feasibility. Alternately, images may be generated for the benefit of communication, in order to offer insights into the expected workings of a particular proposal (possibly including alternatives). This may lead to greater understanding and possibly to reaching consensus amongst different ‘actors’ involved in the design and realisation process. In many cases the results of such visualisation studies contribute to ‘bridging the gap’ between the professionals and other parties involved more indirectly in design decision-making or the appraisal of the proposals. Designers can use distinctly different methods when going about such imaging procedures. Their choices for particular techniques may depend on their familiarity or the availability of certain media devices. Being confronted with new modelling and/or visualisation instruments can stimulate the interest in fresh approaches. In this respect, the design education environment can play an important role in not only teaching ‘proven’ applications to future designers, but also in creating a platform for the active development of innovative approaches to the design visualisation practices: education as a ‘laboratory’ for new insights and potentially a ‘breeding ground’ for the extension of the designer’s instrumentation. This contribution documents the experiences gained in some ten years within an educational application, involving active use of design driven media applications. The emphasis lies on the evolvement of techniques for eye-level imaging, whereby use can be made of different types of models: physical scale models as well as digital, virtual models. Changing attitudes towards dynamic and serial vision are considered, whereby storyboard approaches on the level of integral presentation are considered. By analysing a selection of cases and their underlying approaches an indication is given of the changing attitudes and combinations of multimedia techniques, which offer opportunities to design visualisation and communication.
series	EAEA
more	http://info.tuwien.ac.at/eaea
last changed	2005/09/09 10:43

_id	2004_530
id	2004_530
authors	Breen, Jack
year	2004
title	Changing Roles for (Multi)Media Tools in Design - Assessing Developments and Applications of (Multi)Media Techniques in Design Education, Practice and Research
doi	https://doi.org/10.52842/conf.ecaade.2004.530
source	Architecture in the Network Society [22nd eCAADe Conference Proceedings / ISBN 0-9541183-2-4] Copenhagen (Denmark) 15-18 September 2004, pp. 530-539
summary	This contribution explores the continued evolvement of the instruments of design in relation to practice and education (and potentially: research) and attempts to characterize the effects brought about by recent media ‘shifts’. For this purpose a framework has been established to identify and ‘map’ relevant design media. The relationships between various ‘traditional’ media and computer based applications are scrutinized and characterized and the opportunities which they offer are compared. The underlying conceptual framework was recently put before a group of professionals in the in the course of an experimental workshop concerning the potentials of a virtual design media ‘museum’. In the following step an attempt is made to identify changing media roles, whereby the opportunities of the educational environment – as a ‘laboratory’ for emerging developments – is stressed. Some specific tendencies are identified, notably: the combined application of different sorts of design media; the surfacing of imaginative new working methods inspired by ‘classic’ media techniques and various new ways of escaping the serious limitations of traditional computer interfaces. These developments, making use of various types of computer platforms, may be expected to contribute to more structured – and imaginative – approaches to professional design as well as to architectural education and research.
keywords	Computer Support For Learning; The Changing Role of the Design Studio; Educational Methodologies
series	eCAADe
email
last changed	2022/06/07 07:54

_id	sigradi2006_e183a
id	sigradi2006_e183a
authors	Costa Couceiro, Mauro
year	2006
title	La Arquitectura como Extensión Fenotípica Humana - Un Acercamiento Basado en Análisis Computacionales [Architecture as human phenotypic extension – An approach based on computational explorations]
source	SIGraDi 2006 - [Proceedings of the 10th Iberoamerican Congress of Digital Graphics] Santiago de Chile - Chile 21-23 November 2006, pp. 56-60
summary	The study describes some of the aspects tackled within a current Ph.D. research where architectural applications of constructive, structural and organization processes existing in biological systems are considered. The present information processing capacity of computers and the specific software development have allowed creating a bridge between two holistic nature disciplines: architecture and biology. The crossover between those disciplines entails a methodological paradigm change towards a new one based on the dynamical aspects of forms and compositions. Recent studies about artificial-natural intelligence (Hawkins, 2004) and developmental-evolutionary biology (Maturana, 2004) have added fundamental knowledge about the role of the analogy in the creative process and the relationship between forms and functions. The dimensions and restrictions of the Evo-Devo concepts are analyzed, developed and tested by software that combines parametric geometries, L-systems (Lindenmayer, 1990), shape-grammars (Stiny and Gips, 1971) and evolutionary algorithms (Holland, 1975) as a way of testing new architectural solutions within computable environments. It is pondered Lamarck´s (1744-1829) and Weismann (1834-1914) theoretical approaches to evolution where can be found significant opposing views. Lamarck´s theory assumes that an individual effort towards a specific evolutionary goal can cause change to descendents. On the other hand, Weismann defended that the germ cells are not affected by anything the body learns or any ability it acquires during its life, and cannot pass this information on to the next generation; this is called the Weismann barrier. Lamarck’s widely rejected theory has recently found a new place in artificial and natural intelligence researches as a valid explanation to some aspects of the human knowledge evolution phenomena, that is, the deliberate change of paradigms in the intentional research of solutions. As well as the analogy between genetics and architecture (Estévez and Shu, 2000) is useful in order to understand and program emergent complexity phenomena (Hopfield, 1982) for architectural solutions, also the consideration of architecture as a product of a human extended phenotype can help us to understand better its cultural dimension.
keywords	evolutionary computation; genetic architectures; artificial/natural intelligence
series	SIGRADI
email
last changed	2016/03/10 09:49

_id	ascaad2004_paper1
id	ascaad2004_paper1
authors	Eldin, Neil N. and K.A. Eldrandaly
year	2004
title	A Computer-Aided System for Site Selection of Major Capital Investments
source	eDesign in Architecture: ASCAAD's First International Conference on Computer Aided Architectural Design, 7-9 December 2004, KFUPM, Saudi Arabia
summary	Site selection for capital investments is a crucial complex decision for owners and analysts. Difficulties are caused by the inclusion of the numerous possible sites that may qualify, multiple objectives that could also contradict each other, intangible objectives that are difficult to quantify, diversity of interest groups, uncertainties regarding external factors such as government legislations, uncertainties regarding the timing required for permitting the sites in question, and unknown construction challenges for the different sites. As such, these exercises are multi-facetted and necessitate the employment of analysts who possess in-depth knowledge in a number of fields. More importantly, a solution must satisfy a number of physical suitability criteria, as well as, meeting a number of social, economical, environmental and political requirements. Consequently, a number of specialized tools is frequently utilized to ensure reaching an optimal decision. This paper presents a new system that integrates Analytic Hierarchy Process (AHP) operations within a Geographic Information System (GIS) application to determine the optimum site for a specified facility. The system was validated through a facility for a selected metropolitan area.
series	ASCAAD
last changed	2007/04/08 19:47

_id	eaea2003_27-firsov
id	eaea2003_27-firsov
authors	Firsov, A.I.
year	2004
title	Using Video and Computer Technologies for the Appreciation of the Integral Beauty of Architectural Objects
source	Spatial Simulation and Evaluation - New Tools in Architectural and Urban Design [Proceedings of the 6th European Architectural Endoscopy Association Conference / ISBN 80-227-2088-7], pp. 135-137
summary	The paper is devoted to finding the aesthetic value of architectural objects and it is the continuation of works /1/ and /2/ executed before. In those the following concepts had been developed: a) dot estimation of beauty of an architectural object; b) function of beauty, c) integrated estimation of beauty of an architectural object. // The integrated estimation of beauty doesn t depend upon the choice of a point of observation and can serve as an objective measure of beauty of an architectural object.
series	EAEA
more	http://info.tuwien.ac.at/eaea
last changed	2005/09/09 10:43

_id	2004_396
id	2004_396
authors	Fischer, Thomas
year	2004
title	Microcontroller - Enhanced Physical Models for Architectural and Product Design
doi	https://doi.org/10.52842/conf.ecaade.2004.396
source	Architecture in the Network Society [22nd eCAADe Conference Proceedings / ISBN 0-9541183-2-4] Copenhagen (Denmark) 15-18 September 2004, pp. 396-403
summary	Electronic sensors, controllers, displays and actuators can significantly enhance the value of physical models as processes of use, interaction and transformation take center stage in various fields of design. These technologies allow the development of novel computer interfaces for new kinds of interaction with virtual models, and in the future they will allow new types of active building components and materials for automated construction and dynamic runtime adaptations of inhabitable environments. However, embedding programmed logic into physical objects seems to confront designers and model makers with a steep learning curve outside the domains of their traditional expertise. The variety of alternative technologies and development tools in this area has a particularly disorienting effect on novices. Some early experiences however suggest that mastery of this learning curve is easily within reach, given some basic introduction, guidance and support. It is the purpose of this paper to provide designers with a starting point for explorations into this area, to give orientation and to demonstrate some possible development approaches and results.
keywords	Interaction, Process, High-Fidelity Models, Microcontrollers, Electronics
series	eCAADe
last changed	2022/06/07 07:51

_id	2004_500
id	2004_500
authors	Hanzl, Malgorzata and Wrona, Stefan
year	2004
title	Visual Simulation as a Tool for Planning Education - Computer Aided Participation Support
doi	https://doi.org/10.52842/conf.ecaade.2004.500
source	Architecture in the Network Society [22nd eCAADe Conference Proceedings / ISBN 0-9541183-2-4] Copenhagen (Denmark) 15-18 September 2004, pp. 500-507
summary	Contemporary computer techniques offer many new opportunities to engage citizens into the planning process. There are new possibilities of interaction, introducing an observer into the “game”. The research project presented in the paper assumes the use of a visual 3D language which consists of a series of schematic types of buildings. They form a language which is easy to understand both by professionals and by laymen. Understanding is the very first step towards getting convinced by the ideas presented. The next step is interaction - the user’s action induces the response of the system. The solution proposed by the user meets an evaluation from the part of the system which evokes the user’s interest - in the case presented here the evaluation introduces the simulation of future state of the site. The problem posed is to find out the best way to convince people that some places are less or more suitable for settlement, depending on the media present there, distance from the urban areas and the environment protection. The attempt to create a tool which could be helpful in an educational process is described in the paper. The idea is to prepare a form of a master plan record which uses the visual 3D language and may be accessed via World Wide Web pages. The paper formulates the assessments for the software described above and examines the possibility to create an application. The trial to prepare a web based service using the flash and shockwave technology is presented.
series	eCAADe
email
last changed	2022/06/07 07:49

_id	ascaad2004_paper16
id	ascaad2004_paper16
authors	Hassan, R.; K. Jorgensen
year	2004
title	Computer Visualizations in Planning
source	eDesign in Architecture: ASCAAD's First International Conference on Computer Aided Architectural Design, 7-9 December 2004, KFUPM, Saudi Arabia
summary	A wide range of visualizations have been developed and implemented as tools for urban simulations and visual impact assessment. These include: plans, diagrams, elevations, perspective sketches, renderings, modified photographs (photo renderings and photomontages), slide projections, scale models, movies, videotapes and computer graphics. In the last decade, graphical computer applications have proven to be an increasingly supportive tool in visualization and manipulation of graphical material. This study presents the state of the art of computer visualization in planning. More specifically, the use of web-based computerized visualizations for landscape visual simulation, with the aim to develop a system of visualization techniques as an aid to communicating planning and design scenarios for historically important landscapes and urban places, with particular attention to the city of Nablus in Palestine. This has led to the evaluation of possibilities and potentials of computer use in this field, and to the definition of the visual problems and challenges of the city of Nablus. This study will argue what extra one can draw from computerized visualizations, what is likely to be its impact on future planning and design research, and what this visualization experience really means for historical important locations as in Nablus. The study demonstrates that computerized visualizations can be a powerful tool in representing a cityscape in three-dimensions from different angels. Visualizations will allow better understanding of the components of the city, its landscapes, city features and the process of change. In this way it may provide new and better platforms for public participation in planning.
series	ASCAAD
email
last changed	2007/04/08 19:47

_id	2004_024
id	2004_024
authors	Holmgren, S., Rüdiger, B., Storgaard, K. and Tournay, B.
year	2004
title	The Electronic Neighbourhood - A New Urban Space
doi	https://doi.org/10.52842/conf.ecaade.2004.024
source	Architecture in the Network Society [22nd eCAADe Conference Proceedings / ISBN 0-9541183-2-4] Copenhagen (Denmark) 15-18 September 2004, pp. 24-34
summary	During the event Cultural Market Days on 23 and 24 August 2003 at Noerrebro Park in Copenhagen, visitors could also enter the marketplace from their home via the Internet, as a digital 3D model had been constructed that showed the marketplace with all its information booths and activities. This virtual marketplace functioned as an extension of the urban space, allowing you to take part in the flow of information, activities and experiences that were offered in the marketplace. And this just by a click on the Internet address: http://www.e-kvarter.dk. Furthermore at certain times of the day you could chat with people from some of the many working groups of the urban regeneration project in Noerrebro. The digital 3D model is similar to the marketplace, but it creates its own universe in the green surroundings of Noerrebro Park. And now, when the Cultural Market Days are finished and the booths and people have gone, the Electronic Marketplace still remains on the Internet, with a potential for developing a new public space for information, dialogue and cooperation between the actors of the urban regeneration project. This paper presents the results of a 3-year research project, The Electronic Neighbourhood (2000-2004). Researchers have developed and tested a digital model of the urban area and other digital tools for supporting the dialogue and cooperation between professionals and citizens in an urban regeneration project in Copenhagen. The Danish Agency for Enterprise and Housing, the Ministry for Refugees, Immigration and Integration and Copenhagen Municipality have financed the research, which is planned to be published 2004. The results can also be followed on the Internet www.e-kvarter.dk.
keywords	3D Modelling; Virtual Environments; Design Process; Human-Computer Interaction; Collaborative Design; Urban Planning
series	eCAADe
last changed	2022/06/07 07:50

_id	avocaad_2003_21
id	avocaad_2003_21
authors	Jaroslaw Szewczyk
year	2003
title	Technology and Local Values; Computer – Aided Acting with Regional Heritage
source	LOCAL VALUES in a NETWORKED DESIGN WORLD - ADDED VALUE OF COMPUTER AIDED ARCHITECTURAL DESIGN, Stellingwerff, Martijn and Verbeke, Johan (Eds.), (2004) DUP Science - Delft University Press, ISBN 90-407-2507-1.
summary	The problems of storage of local cultural heritage in digital databases, are reported in the paper. An exemplar case of RuralXML framework is presented. Three main groups of challenges relating to “culturally rich” databases are recognised:1. Estimation of the significance of digital databases for supporting design process, educational needs and scientific investigations;2. The conceptual problems with digital representation of “the paper heritage”3. The technical problems related to the architectural databases.The most important aspects of the problem are mentioned, as a background to a discussion about the reciprocal dependencies between technology and local values, i.e. how technology supports acting with the local architectural heritage, and how “cultural significance” values technology. We claim that digital technology not only enables storage and management of such data, but it also adds a new dimension to the design, making it “locally-sensitive” and oriented towards context by means of employing digitally archived architectural data. The accessibility to information about the “local” architecture heritage is important for local as well as global design. The premises for such statements, are presented.
keywords	Architecture, Local values, Globalisation, Computer Aided Architectural Design
series	AVOCAAD
email
last changed	2006/01/16 21:38

_id	sigradi2004_493
id	sigradi2004_493
authors	Jean-Pierre Chupin
year	2004
title	The "tectonic bug" (The fall of the body in cyberspace)
source	SIGraDi 2004 - [Proceedings of the 8th Iberoamerican Congress of Digital Graphics] Porte Alegre - Brasil 10-12 november 2004
summary	Architects have been opening up onto cyberspace for more than a decade now. In terms of disciplinary issues, at stake is our ability to inhabit this new space as .designers. and not just as spectators. In the mid 90s, two theories engaged in a major confrontation. The first valued the virtual dimension of architectural space (W. J. Mitchell, City of Bits, 1995), the other valued the tectonic dimension and its constructive poiesis (K. Frampton, Studies in Tectonic Culture, 1995). Although divergent in their view of architecture.s role in the future of our technological societies, both theories revealed aspects of our relationship to the contemporary body that were, and today remain, inseparable. Where Mitchell.s book clearly intends to establish cyberspace as a new playground for architects, giving convincing examples of the programmatic mutations of modern spatiality, Kenneth Frampton.s work, Studies in Tectonic Culture, reexamines the constructive culture underlying the modern conception of space. Neither a simple history text nor a collection of technical poetry, this latter work is a manifesto developing a set of materialist ethics for the discipline of architecture. This "rappel à lordre" to resist the increasing dematerialization of architecture closes tentatively with Le Corbusier.s classic metaphor of the acrobat: The architect, he said, must not look for truth in extremes. Rather, he must struggle constantly to maintain balance. .Nobody asked him to do this. Nobody owes him any thanks. He lives in the extraordinary world of the acrobat.. Following Le Corbusier.s advice, and in consideration of current and recurrent tensions between the virtual and the tectonic, what can we say today of such a delicate equilibrium?
series	SIGRADI
email
last changed	2016/03/10 09:53

_id	sigradi2004_367
id	sigradi2004_367
authors	Khaled K. Tarazi
year	2004
title	The fifth elevation: Effects of digital graphic design and printing technologies on the urban fabric in developing countries
source	SIGraDi 2004 - [Proceedings of the 8th Iberoamerican Congress of Digital Graphics] Porte Alegre - Brasil 10-12 november 2004
summary	The paper reports on a study that identifies the effects of current advertising and printing technologies on urban spaces in developing countries. The complexities of these advertising applications form a complicated hierarchical web that requires an investigation of surface- volume-context relationships to minimize the tension between the graphical message and the urban fabric. Regressive application of technology-based graphic design and advertisement in the form of billboards and signage, form a new layer identified as the fifth elevation. The study endeavors for positive consequences of such elevations and differentiates between chaos and complexity. Consequently, the study categorizes various advertising schemes and recommends short-term guidelines to reduce chaotic amalgamation. Several design factors and new advertising schemes are proposed to sustain cultural and visual coherency of urban spaces. When applied, these recommendations could prove useful for many cities in the Middle East due to planning, cultural, economical, and religious, similarities.
keywords	Graphic design, printing technologies, urban fabric, advertising concepts, billboards
series	SIGRADI
email
last changed	2016/03/10 09:53

_id	ascaad2004_paper15
id	ascaad2004_paper15
authors	Mallasi, Z.
year	2004
title	Identification and Visualisation of Construction Activities’ Workspace Conflicts Utilising 4D CAD/VR Tools
source	eDesign in Architecture: ASCAAD's First International Conference on Computer Aided Architectural Design, 7-9 December 2004, KFUPM, Saudi Arabia
summary	This work addresses the problem arising on all construction sites: the occurrence of workspace interference between construction activities. From a site space planning context, this problem can lead to an inevitable roadblock to the progress of the scheduled construction operations. In real situations, when the spatial congestions occur, they could reduce productivity of workers sharing the same workspace and may cause health and safety hazard issues. The aim of this paper is on presenting a computer-based method and developed tool to assist site managers in the assignment and identification of workspace conflicts. The author focuses on the concept of ‘visualising space competition’ between the construction activities. The concept is based on a unique representation of the dynamic behaviour of activity workspace in 3D space and time. An innovative computer-based tool dubbed PECASO (Patterns Execution and Critical Analysis of Site-space Organisation) has been developed. The emerging technique of 4D (3D + time) visualisation has been chosen to yield an interesting 4D space planning and visualisation tool. A multi-criteria function for measuring the severity of the workspace congestions is designed, embedding the spatial and schedule related criteria. The paper evaluates the PECASO approach in order to minimise the workspace congestions, using a real case study. The paper concludes that the PECASO approach reduces the number of competing workspaces and the conflicting volumes between occupied workspace, which in turn produces better assessment to the execution strategy for a given project schedule. The system proves to be a promising tool for 4D space planning; in that it introduces a new way of communicating the programme of work.
series	ASCAAD
email
last changed	2007/04/08 19:47

_id	eaea2003_08-ohno
id	eaea2003_08-ohno
authors	Ohno, R., Soeda, M. and Nakashima, K.
year	2004
title	The Effectiveness of Design Guideline Regulations for Improving Streetscapes
source	Spatial Simulation and Evaluation - New Tools in Architectural and Urban Design [Proceedings of the 6th European Architectural Endoscopy Association Conference / ISBN 80-227-2088-7], pp. 21-27
summary	Municipal governments or developers make design guidelines to create harmonious streetscapes in new towns. The regulations, however, are often based on arbitrary decisions without any empirical research. The present study employed a visual simulation system to test the effects of such physical features of the buildings as color, height, flatness of the building façade and its recess from the street on pedestrians’ impressions of the place. Thirty subjects were asked to rate their impressions of “order”, “simple”, and to evaluate the atmosphere after experiencing the simulated scenes. The results revealed some relations between the physical features and the pedestrians’ responses.
series	EAEA
more	http://info.tuwien.ac.at/eaea
last changed	2005/09/09 10:43

_id	acadia04_052
id	acadia04_052
authors	Sliwka, Ryszard
year	2004
title	Untimely Fabrications
doi	https://doi.org/10.52842/conf.acadia.2004.052
source	Fabrication: Examining the Digital Practice of Architecture [Proceedings of the 23rd Annual Conference of the Association for Computer Aided Design in Architecture and the 2004 Conference of the AIA Technology in Architectural Practice Knowledge Community / ISBN 0-9696665-2-7] Cambridge (Ontario) 8-14 November, 2004, 52-65
summary	The value of material in architectural practice is determined not by its character but by functional performance and economy. In early modernist thought, part of this motivation was to liberate construction from the ‘burden’ of aesthetic speculations and return it simply to the concerns of building. Any artistic agenda became embedded in the economic and productive processes of the project. Authenticity emerged out of the need to focus on the essentials and reject the superfluous. However, this demand for truth in materials has long since been compromised by the climatic requirements of building enclosure. Most contemporary practice in architecture is derived from principles of cladding where the ‘essential nature’ of a complex building requires concealment. The communication of the building is expressed in the refinement of the layers that make up the surface. This shift from the emphasis on making and the idea of ‘material’ in architecture, to one of perception and ‘materiality,’ has an important corporeal dimension that parallels the material aesthetic practices developed in art and sculpture in the 1960s. In this sense, Fabrication carries an ‘untimely’ dimension. This paper proposes to look at the work of a broad range of architects, both well-known and not so well-known, in light of these artistic-based approaches to materiality. Digital fabrication opens a new chapter on this debate and it remains to be seen how this economically useful approach to construction changes, once architects investigate the visual characteristics of materials and methods of fabrication.
keywords	material, materiality, embodiment, fabrication
series	ACADIA
email
last changed	2022/06/07 07:56

_id	ascaad2004_paper8
id	ascaad2004_paper8
authors	Taha, Dina; Samir Hosni, Hisham Sueyllam, Bernd Streich and Michael Richter
year	2004
title	A Case Based Architectural Design Application for Residential Units
source	eDesign in Architecture: ASCAAD's First International Conference on Computer Aided Architectural Design, 7-9 December 2004, KFUPM, Saudi Arabia
summary	Case Based Reasoning (CBR) is an AI approach that is widely used in many fields. When it’s applied in the design field, it is frequently called Case Based Design (CBD). Its main idea resides in drawing analogies between past cases and the new case to be solved so that the user can make use of past experiences when solving a new problem. The work presented here describes a prototype application under development that makes use of CBR in the field of architectural design. The application is to act as a helping tool for architects in the pre-design phase by supplying them with an adequate number of similar past architectural cases to the design problem they have at hand. The different modules of the application will be presented and discussed, as well as the tools used to develop them.
series	ASCAAD
type	normal paper
email
last changed	2021/07/16 10:33

For more results click below: