Cumincad : CUMINCAD Papers : Search Results

CumInCAD is a Cumulative Index about publications in Computer Aided Architectural Design
supported by the sibling associations ACADIA, CAADRIA, eCAADe, SIGraDi, ASCAAD and CAAD futures

PDF papers
References

Hits 1 to 20 of 572

Reformat results as: short short into frame detailed detailed into frame

_id	ascaad2004_paper10
id	ascaad2004_paper10
authors	Khaled, Sherbini and Krawczyk, Robert
year	2004
title	Overview of Intelligent Architecture
source	eDesign in Architecture: ASCAAD's First International Conference on Computer Aided Architectural Design, 7-9 December 2004, KFUPM, Saudi Arabia
summary	The concept of intelligent architecture started as an interest in the latest integrated building systems operating a single building or facility, so that systems can communicate and exchange information. The communication among these systems allows the right responses and decisions to operate buildings in a productive, economical and convenient way. Communication and information sharing prevents decisions from interfering with other systems’ responses or operation. Systems’ decisions and responses form the responsive architecture that is represented by systems outputs. If intelligent buildings need to receive, analyze, and react according to such processes, responsive ones are required only to receive and react to only one input parameter. Technology and communication systems make it possible to combine several parameters by using system integration and computerization. Technology and computerized systems have enhanced and changed the manner of responses and provided a variety of decisions according to different sources of information. Receiving, analyzing, and reacting are the key criteria of intelligent building that this paper will explore. The input (reception) category covers information detection devices such as temperature sensors. The second category will be the category of analysing devices. The third category, decisions and outputs, will cover both output of sensory devices and forms of reaction and response that emanate from these systems. As a result of the third category, this paper will survey the forms of responses to determine whether or not the kinetic response is a viable choice. The paper will discuss if these three criteria are the only criteria creating intelligent building or if there are others. The paper will give an overview on intelligent architecture and explore in the main criteria determining intelligent building. The paper will then discuss when “responsive” and "kinetic" architecture becomes “intelligent”. The paper will also redefine the intelligent architecture in the light of available technology.
series	ASCAAD
email
last changed	2007/04/08 19:47

_id	eaea2003_11-bremer-sander
id	eaea2003_11-bremer-sander
authors	Bremer, S. and Sander, H.
year	2004
title	View from the Road: Environmental Simulation for the Fractal City of Rhine Ruhr
source	Spatial Simulation and Evaluation - New Tools in Architectural and Urban Design [Proceedings of the 6th European Architectural Endoscopy Association Conference / ISBN 80-227-2088-7], pp. 43-47
summary	Highway seems to be more an issue of traffic planning than of urban design. But the highway can be a very important factor for the modern city pattern. Highways shape the spatial form of the fractal city. The modern highway can define new cores outside and “interior edges” within the city. Seen as a planning tool, highways are the great neglected opportunity in city and regional design. The 1st Architecture Biennial, 1ab, taking place from May 2003 to July 2003 in Rotterdam, explores the creative potentials of modern highways worldwide. An international research team discovered the spatial functions of highways in modern agglomerations. This lecture will give an overview of the results of the worldwide analyses and the design projects that had been undertaken. Both authors are members of the German research team. The German team examined the A 42 running through the Ruhrgebiet, a former coal and steal area in western Germany. The Ruhr Area is converting from an industrially orientated region to an agglomeration of high technology and science. But the regional image remains the same due to the fact that the changes cannot be seen, neither physically, nor from the road. Here, the highway could be used as a catalyst supporting and structuring the spatial changes to make them more legible for the people of Rhine-Ruhr. The nature becomes the most important tool of highway design. Landscape forms a linkage between the different cities of the region. Together with the A 40 and other local highways the region becomes the most important (and largest) public space of the new Rhine-Ruhr. The highway seen as a work of urban art can be designed only from the perspective of the driving car.
series	EAEA
more	http://info.tuwien.ac.at/eaea
last changed	2005/09/09 10:43

_id	ddss2008-33
id	ddss2008-33
authors	Charlton, James A.; Bob Giddings and Margaret Horne
year	2008
title	A survey of computer software for the urban designprocess
source	H.J.P. Timmermans, B. de Vries (eds.) 2008, Design & Decision Support Systems in Architecture and Urban Planning, ISBN 978-90-6814-173-3, University of Technology Eindhoven, published on CD
summary	Urban design is concerned with the shape, the surface and the physical arrangement of all kinds of urban elements, the basic components that make up the built environment, at the level of buildings, spaces and human activities. It is also concerned with the non-visual aspects of the environment, such as noise, wind and temperature and humidity. The city square is a particular urban element which can take many forms and its geometrical relationships such as maximum dimensions, ratio of width to length and building height to length have been analysed for centuries (Alberti 1475), (Vitruvius 1550), (Sitte 1889), (Corbett 2004). Within the current urban design process there are increasing examples of three dimensional computer representations which allow the user to experience a visual sense of the geometry of city squares in an urban landscape. Computer-aided design and Virtual Reality technologies have recently contributed to this visual assessment, but there have been limited attempts at 3D computer representations which allow the user to experience a greater sense of the urban space. This paper will describe a survey of computer tools which could support a more holistic approach to urban design and which could be used to simulate a number of urban texture and urban quality aspects. It will provide a systematic overview of currently available software that could support the simulation of building density, height, colour and style as well as conditions relating to noise, shading, heat, natural and artificial light. It will describe a methodology for the selection and filtering of appropriate computer applications and offer an initial evaluation of these tools for the analysis and representation of the three-dimensional geometry, urban texture and urban quality of city centre spaces. The paper is structured to include an introduction to the design criteria relating to city centre spaces which underpins this research. Next the systematic review of computer software will be described, and selected tools will undergo initial evaluation. Finally conclusions will be drawn and areas for future research identified.
keywords	Urban design, Software identification, 3D modelling, Pedestrian modelling, Wind modelling, Noise mapping, Thermal comfort, VR Engine
series	DDSS
last changed	2008/09/01 17:06

_id	2004_148
id	2004_148
authors	Fatah gen. Schieck, A., Penn, A., Mottram, C., Strothmann, C., Ohlenburg, J., Broll, W. and Aish, F.
year	2004
title	Interactive Space Generation through Play - Exploring Form Creation and the Role of Simulation on the Design Table
doi	https://doi.org/10.52842/conf.ecaade.2004.148
source	Architecture in the Network Society [22nd eCAADe Conference Proceedings / ISBN 0-9541183-2-4] Copenhagen (Denmark) 15-18 September 2004, pp. 148-158
summary	In this paper we report on recent developments in ARTHUR: an approach to support complex design and planning decisions for architects together with the simulation of pedestrian movement and the integration of existing CAD tools on the design table. Following a brief introduction, past and current work that has taken a similar approach will be reviewed. Next we describe a scenario that integrates agent-based simulations of pedestrian movement with space creation, and then give an overview of the system before finally discussing findings related to recent user evaluation studies of the system. This paper suggests that the integration of simulated pedestrian movement on the design table, while going through a cycle of reflection-in-action, plays a vital role in exploring possible design solutions and encourages new and different ways of thinking about design problems.
keywords	Tangible User Interface, Pedestrian Simulation, Collaboration, Augmented Reality (AR), CAD Integration
series	eCAADe
last changed	2022/06/07 07:55

_id	2004_262
id	2004_262
authors	Martens, Bob
year	2004
title	CAAD-Repositories for Scientific Information Exchange - An Overview on SciX-Pilots Related to CAAD
doi	https://doi.org/10.52842/conf.ecaade.2004.262
source	Architecture in the Network Society [22nd eCAADe Conference Proceedings / ISBN 0-9541183-2-4] Copenhagen (Denmark) 15-18 September 2004, pp. 262-268
summary	Academic publishing started in the hands and under the control of learned societies. Open access to digital publications has the potential of returning control to these associations again. In this paper CAAD-related digital library pilots, which were developed in the framework of the SciX-project (“Open, Self Organising Repository for Scientific Information Exchange”) will be elaborated. SciX focused its work on the infrastructure and business models for subject-specific repositories. Electronic publishing can re-establish the central role of scientific communities and associations in the scientific publishing process.
keywords	Database Systems; Scientific Knowledge Management; Retrospective CAAD Research; Web-Based Bibliographic Database
series	eCAADe
email
last changed	2022/06/07 07:59

_id	ascaad2007_036
id	ascaad2007_036
authors	Pratini, E.F.
year	2007
title	Experimental Tools for the Teaching of Technical Graphics and Improving Visualization
source	Em‘body’ing Virtual Architecture: The Third International Conference of the Arab Society for Computer Aided Architectural Design (ASCAAD 2007), 28-30 November 2007, Alexandria, Egypt, pp. 457-468
summary	This paper presents an updated evaluation of an experience of applying computer graphics, virtual reality and Internet resources in the teaching of technical graphics at the University of Brasilia, Brazil. It differs from a previous paper (Pratini, 2004) for the addition of an overview of the course, the context and the new teaching methodology. It is an extended, more detailed paper, which includes examples, and closes with some results of surveys on the didactic material and the methodology. Our motivation for this experiment is the fact that most of the students have a lack of previous knowledge on the basis of drawings, resulting difficulties in both understanding and visualizing technical drawings. In this experiment, we introduced VRML 3D modeling in addition to CAD and regular pencil-and-paper drawings study and practice. To support the learning of this broad knowledge not present in the technical graphics bibliography, we first provided a website with animations and virtual reality resources. Since 2003 we are providing a CD-ROM containing all the former website material which is updated each semester. At the present time, the CD-ROM contains almost all the needed didactic material and software for the one semester technical graphics course. This experience was intended to improve and to support learning in a way that motivates the students, young people who are used to play video and computer games. Classes, website and CD-ROM material were conceived to take advantage of computers´ interactivity and animated resources. The use of computers´ technology and new media to support the learning resulted a new methodology and several new unanswered questions.
series	ASCAAD
email
last changed	2008/01/21 22:00

_id	2004_325
id	2004_325
authors	Sarawgi, Tina
year	2004
title	Using Computers as a Spatial Visualization and Design Exploration Medium
doi	https://doi.org/10.52842/conf.ecaade.2004.325
source	Architecture in the Network Society [22nd eCAADe Conference Proceedings / ISBN 0-9541183-2-4] Copenhagen (Denmark) 15-18 September 2004, pp. 325-332
summary	The constant advances in the use of computers to simulate light over the past few decades, has led computer-aided rendering to become increasingly photorealistic. However, the rendering is still processor-intensive and time-consuming, difficult to generate in real time. Design students need to be well versed in the depiction of the effects of light in an environment, crucial to spatial visualization. With increasing computing power, advanced algorithms and increased realism, the central pedagogical issue in their use is not what computers can do for us today, but what and how we can make them do what we do better. We have to be careful in not getting seduced by the advancing technology but use it innovatively to build students into better designers. This paper discusses a project demonstrating the apparent potential of computers for spatial visualization and design exploration of light and space, in their present stage. The project shows a departure from the traditional methods of using computers or of teaching lighting in a design school. Computers are used by students to especially create flashy imagery. On the other hand, lighting is explained in clinical terms without exploration of its experiential qualities. This exercise helped the students to develop a better understanding of the physics of light from the method most familiar and expected of students – visual. The project deems it more important to have a quick means to produce an overview of the implication of the design choices than to provide precise information regarding a hypothetical final solution. Hence, after creating the lighting in the space based on the desired experiential qualities, the illumination can be conveyed to a lighting expert for detailed quantitative computations. The project results are shown and outcomes discussed.
keywords	Visualization, Light, Space, Digital Technology, Pedagogy
series	eCAADe
last changed	2022/06/07 07:57

_id	avocaad_2003_05
id	avocaad_2003_05
authors	Alexander Koutamanis
year	2003
title	Autonomous mechanisms in architectural design systems
source	LOCAL VALUES in a NETWORKED DESIGN WORLD - ADDED VALUE OF COMPUTER AIDED ARCHITECTURAL DESIGN, Stellingwerff, Martijn and Verbeke, Johan (Eds.), (2004) DUP Science - Delft University Press, ISBN 90-407-2507-1.
summary	The development of architectural design systems that describe fully the form, structure and behaviour of a design relies heavily on the incorporation of intelligence in the representations, analyses, transformations and transactions used by the computer. Traditionally such intelligence takes either of two forms. The first is a methodical framework that guides actions supported by the design system (usually in a top-down fashion). The second is local, intelligence mechanisms that resolve discrete, relatively well-defined subproblems (often with limited if any user intervention). Local intelligent mechanisms offer the means for adaptability and transformability in architectural design systems, including the localization of global tendencies. This refers both to the digital design technologies and to the historical, cultural and contextual modifications of design styles and approaches.
keywords	Architecture, Local values, Globalisation, Computer Aided Architectural Design
series	AVOCAAD
email
last changed	2006/01/16 21:38

_id	acadia04_282
id	acadia04_282
authors	Anders, Peter
year	2004
title	Arch-OS: An Implementation of Cybrid Strategies
doi	https://doi.org/10.52842/conf.acadia.2004.282
source	Fabrication: Examining the Digital Practice of Architecture [Proceedings of the 23rd Annual Conference of the Association for Computer Aided Design in Architecture and the 2004 Conference of the AIA Technology in Architectural Practice Knowledge Community / ISBN 0-9696665-2-7] Cambridge (Ontario) 8-14 November, 2004, 282-293
summary	A review of the literature on Intelligent Buildings suggests an ideal of a building as an autonomous system that controls its internal and external environments. The model, whose origin lies with early models of artificial intelligence, effectively treats the building as a slave to human needs, and appears to invest more intelligence in the building than in its occupants. This paper proposes that automated environments be understood as extensions of human sense and awareness. It describes an operating system, Arch-OS, that exemplifies this approach by increasing building occupants’ consciousness of their environment.
keywords	Cybrid, Mixed Reality, Responsive Environment, Planetary Collegium
series	ACADIA
email
last changed	2022/06/07 07:54

_id	sigradi2006_e131c
id	sigradi2006_e131c
authors	Ataman, Osman
year	2006
title	Toward New Wall Systems: Lighter, Stronger, Versatile
source	SIGraDi 2006 - [Proceedings of the 10th Iberoamerican Congress of Digital Graphics] Santiago de Chile - Chile 21-23 November 2006, pp. 248-253
summary	Recent developments in digital technologies and smart materials have created new opportunities and are suggesting significant changes in the way we design and build architecture. Traditionally, however, there has always been a gap between the new technologies and their applications into other areas. Even though, most technological innovations hold the promise to transform the building industry and the architecture within, and although, there have been some limited attempts in this area recently; to date architecture has failed to utilize the vast amount of accumulated technological knowledge and innovations to significantly transform the industry. Consequently, the applications of new technologies to architecture remain remote and inadequate. One of the main reasons of this problem is economical. Architecture is still seen and operated as a sub-service to the Construction industry and it does not seem to be feasible to apply recent innovations in Building Technology area. Another reason lies at the heart of architectural education. Architectural education does not follow technological innovations (Watson 1997), and that “design and technology issues are trivialized by their segregation from one another” (Fernandez 2004). The final reason is practicality and this one is partially related to the previous reasons. The history of architecture is full of visions for revolutionizing building technology, ideas that failed to achieve commercial practicality. Although, there have been some adaptations in this area recently, the improvements in architecture reflect only incremental progress, not the significant discoveries needed to transform the industry. However, architectural innovations and movements have often been generated by the advances of building materials, such as the impact of steel in the last and reinforced concrete in this century. There have been some scattered attempts of the creation of new materials and systems but currently they are mainly used for limited remote applications and mostly for aesthetic purposes. We believe a new architectural material class is needed which will merge digital and material technologies, embedded in architectural spaces and play a significant role in the way we use and experience architecture. As a principle element of architecture, technology has allowed for the wall to become an increasingly dynamic component of the built environment. The traditional connotations and objectives related to the wall are being redefined: static becomes fluid, opaque becomes transparent, barrier becomes filter and boundary becomes borderless. Combining smart materials, intelligent systems, engineering, and art can create a component that does not just support and define but significantly enhances the architectural space. This paper presents an ongoing research project about the development of new class of architectural wall system by incorporating distributed sensors and macroelectronics directly into the building environment. This type of composite, which is a representative example of an even broader class of smart architectural material, has the potential to change the design and function of an architectural structure or living environment. As of today, this kind of composite does not exist. Once completed, this will be the first technology on its own. We believe this study will lay the fundamental groundwork for a new paradigm in surface engineering that may be of considerable significance in architecture, building and construction industry, and materials science.
keywords	Digital; Material; Wall; Electronics
series	SIGRADI
email
last changed	2016/03/10 09:47

_id	2004_426
id	2004_426
authors	Carrara, Gianfranco and Fioravanti, Antonio
year	2004
title	How to Construct an Audience in Collaborative Design - The Relationship Among which Actors in the Design Process
doi	https://doi.org/10.52842/conf.ecaade.2004.426
source	Architecture in the Network Society [22nd eCAADe Conference Proceedings / ISBN 0-9541183-2-4] Copenhagen (Denmark) 15-18 September 2004, pp. 426-434
summary	The features of complexity in architectural design have now been clarified. Complexity, intrinsic in architectural work, has increased in recent years as in all other fields of human endeavour – social, economic and cultural. In the specific case of architectural design, the most significant factors in this regard consist of the large number of actors, the numerous disciplines involved, technological innovation, regulations and rules governing the design process and the various different design aims. In order to address this complex of problems, long-term research based on the Collaborative Design paradigm, CD, is now being carried out. In it, thanks to the reciprocal exchange of information, the complementary nature of the knowledge possessed by the various actors, and the contemporary nature of the design action by the various actors on the same components, positive effects are exerted on the design as a whole. The latter thus gains in coherence and in improved integration among the design solutions proposed by the various actors. In CD all the actors are involved from the outset of the design work and are helped by distributed Knowledge Bases (KBs) and Intelligent Assistants (IAs). In this case it may happen that information and knowledge automatically exchanged among KBs (through the IAs) are excessive and/or not addressed to the right actors. How can information redundancy be avoided, and how can the flow of information sent over the network be controlled? The present paper introduces and defines the concept of „Audience“, that is, the group of actors to which it is permitted to send information concerning non respected requirements and the „reduced Audience“ to which to send the knowledge needed to overcome the difficulties encountered.
keywords	Collaborative Architectural Design, Complexity, Intelligent Assistant, Context, Audience
series	eCAADe
last changed	2022/06/07 07:55

_id	disschoo
id	disschoo
authors	Choo, Seung Yeon
year	2004
title	STUDY ON COMPUTER-AIDED DESIGN SUPPORT OF TRADITIONAL ARCHITECTURAL THEORIES
source	Technische Universität München
summary	The research presented in this thesis describes a computer-aided design support of traditional architectural theories. Traditional architectural theories in western architecture have been considered as a basis for answering the fundamental questions of architecture: proportion, symmetry, colour, harmony and so on. In particular, the aesthetic aspect of these theories has been one of many important architectural aspects, and which is concerned with the field of architecture in determining the beauty of architectural form. The most significant role of the traditional theories in architecture is to maintain unity, to avoid chaos and then to achieve harmony in a design, using some specific design principles. However, current technology-guided constructions tend to neglect often the importance of these theories due to the standardization of building elements, due to mechanically-prepared construction and the reducing completion costs, etc. Thus, this research proposes a design support system as a design assistant that gives an intelligent advice on architectural design, using analytical design- and ordering- principles of traditional theories for the optimization of the architectural design from the aesthetic perspective. To evaluate the aesthetic quality of an architectural design, this system is implemented in the AutoCAD environment, using the AutoLISP. It is applied so as to explain and develop aesthetic qualities of a design. Designs proposed by this system include optimum designs, which are based on the traditional architectural theories, and new ones which can be in future connected to information models. To do this, the definition of information about building elements is accomplished by using the neutral format EXPRESS and EXPRESS-G for such application systems. The results of the application system are presented, such as the easily generating and quickly conceptualising of an object model, the checking of the aesthetic value of the design during the various design phases, the helping to find direction during rational searching for a solution. The user can easily appreciate the usefulness of the proposed system as a set of tools for searching for rational architectural aesthetics and formal solutions at different design-stages. It is to be hoped that a new "traditional" fundamental of architecture, such as the proposed system, incorporating CAAD systems, will find its place among new technological methods in the AEC industry and so help to bridge the gap between the value of traditional architecture and CAAD systems.
keywords	Aesthetics, Design Theory, Order Principle, Product Model, IFC, AutoCAD/AutoLISP
series	thesis:PhD
type	normal paper
email
more	http://tumb1.biblio.tu-muenchen.de/publ/diss/ar/2004/choo.html
last changed	2004/05/23 07:05

_id	sigradi2006_e028c
id	sigradi2006_e028c
authors	Griffith, Kenfield; Sass, Larry and Michaud, Dennis
year	2006
title	A strategy for complex-curved building design:Design structure with Bi-lateral contouring as integrally connected ribs
source	SIGraDi 2006 - [Proceedings of the 10th Iberoamerican Congress of Digital Graphics] Santiago de Chile - Chile 21-23 November 2006, pp. 465-469
summary	Shapes in designs created by architects such as Gehry Partners (Shelden, 2002), Foster and Partners, and Kohn Peterson and Fox rely on computational processes for rationalizing complex geometry for building construction. Rationalization is the reduction of a complete geometric shape into discrete components. Unfortunately, for many architects the rationalization is limited reducing solid models to surfaces or data on spread sheets for contractors to follow. Rationalized models produced by the firms listed above do not offer strategies for construction or digital fabrication. For the physical production of CAD description an alternative to the rationalized description is needed. This paper examines the coupling of digital rationalization and digital fabrication with physical mockups (Rich, 1989). Our aim is to explore complex relationships found in early and mid stage design phases when digital fabrication is used to produce design outcomes. Results of our investigation will aid architects and engineers in addressing the complications found in the translation of design models embedded with precision to constructible geometries. We present an algorithmically based approach to design rationalization that supports physical production as well as surface production of desktop models. Our approach is an alternative to conventional rapid prototyping that builds objects by assembly of laterally sliced contours from a solid model. We explored an improved product description for rapid manufacture as bilateral contouring for structure and panelling for strength (Kolarevic, 2003). Infrastructure typically found within aerospace, automotive, and shipbuilding industries, bilateral contouring is an organized matrix of horizontal and vertical interlocking ribs evenly distributed along a surface. These structures are monocoque and semi-monocoque assemblies composed of structural ribs and skinning attached by rivets and adhesives. Alternative, bi-lateral contouring discussed is an interlocking matrix of plywood strips having integral joinery for assembly. Unlike traditional methods of building representations through malleable materials for creating tangible objects (Friedman, 2002), this approach constructs with the implication for building life-size solutions. Three algorithms are presented as examples of rationalized design production with physical results. The first algorithm [Figure 1] deconstructs an initial 2D curved form into ribbed slices to be assembled through integral connections constructed as part of the rib solution. The second algorithm [Figure 2] deconstructs curved forms of greater complexity. The algorithm walks along the surface extracting surface information along horizontal and vertical axes saving surface information resulting in a ribbed structure of slight double curvature. The final algorithm [Figure 3] is expressed as plug-in software for Rhino that deconstructs a design to components for assembly as rib structures. The plug-in also translates geometries to a flatten position for 2D fabrication. The software demonstrates the full scope of the research exploration. Studies published by Dodgson argued that innovation technology (IvT) (Dodgson, Gann, Salter, 2004) helped in solving projects like the Guggenheim in Bilbao, the leaning Tower of Pisa in Italy, and the Millennium Bridge in London. Similarly, the method discussed in this paper will aid in solving physical production problems with complex building forms. References Bentley, P.J. (Ed.). Evolutionary Design by Computers. Morgan Kaufman Publishers Inc. San Francisco, CA, 1-73 Celani, G, (2004) “From simple to complex: using AutoCAD to build generative design systems” in: L. Caldas and J. Duarte (org.) Implementations issues in generative design systems. First Intl. Conference on Design Computing and Cognition, July 2004 Dodgson M, Gann D.M., Salter A, (2004), “Impact of Innovation Technology on Engineering Problem Solving: Lessons from High Profile Public Projects,” Industrial Dynamics, Innovation and Development, 2004 Dristas, (2004) “Design Operators.” Thesis. Massachusetts Institute of Technology, Cambridge, MA, 2004 Friedman, M, (2002), Gehry Talks: Architecture + Practice, Universe Publishing, New York, NY, 2002 Kolarevic, B, (2003), Architecture in the Digital Age: Design and Manufacturing, Spon Press, London, UK, 2003 Opas J, Bochnick H, Tuomi J, (1994), “Manufacturability Analysis as a Part of CAD/CAM Integration”, Intelligent Systems in Design and Manufacturing, 261-292 Rudolph S, Alber R, (2002), “An Evolutionary Approach to the Inverse Problem in Rule-Based Design Representations”, Artificial Intelligence in Design ’02, 329-350 Rich M, (1989), Digital Mockup, American Institute of Aeronautics and Astronautics, Reston, VA, 1989 Schön, D., The Reflective Practitioner: How Professional Think in Action. Basic Books. 1983 Shelden, D, (2003), “Digital Surface Representation and the Constructability of Gehry’s Architecture.” Diss. Massachusetts Institute of Technology, Cambridge, MA, 2003 Smithers T, Conkie A, Doheny J, Logan B, Millington K, (1989), “Design as Intelligent Behaviour: An AI in Design Thesis Programme”, Artificial Intelligence in Design, 293-334 Smithers T, (2002), “Synthesis in Designing”, Artificial Intelligence in Design ’02, 3-24 Stiny, G, (1977), “Ice-ray: a note on the generation of Chinese lattice designs” Environmental and Planning B, volume 4, pp. 89-98
keywords	Digital fabrication; bilateral contouring; integral connection; complex-curve
series	SIGRADI
email
last changed	2016/03/10 09:52

_id	caadria2004_0
id	caadria2004_0
authors	Lee, Hyun Soo and Choi, Jin Won (Eds.)
year	2004
title	CAADRIA 2004
doi	https://doi.org/10.52842/conf.caadria.2004
source	Proceedings of the 9th International Conference on Computer Aided Architectural Design Research in Asia / ISBN 89-7141-648-3 / Seoul (Korea) 28-30 April 2004, 983 p.
summary	Having as topic for the conference the tile with keywords such as culture, technology, and architecture, we were expecting to find out the relationships among those three domains, and how they are interrelated in this fast growing information society. This triangular relationship has been established based on the increasingly noticeable paradigm shift from traditional computer-aided design research in architecture to research in diverse areas such as virtual environments and communities and interactive smart spaces, including the consideration of sociocultural aspects along with the technological issues. Making virtual environments focuses on creating a new, yet virtual world where people can inhabit or visit for diverse purposes. The virtual architecture becomes a medium for diverse communications as well as digital contents for the new media industry. For example, virtual heritage projects introduce a new way of preserving historic buildings and sites. At the same time, interactive smart spaces often combine two different worlds: real and virtual worlds. Growing digital technologies enables us to create intelligent physical spaces where computers are ubiquitous and invisible in space, and thus human beings can interact with architectural spaces, not necessarily with computers directly. At this point, issues on virtual reality (VR) and human computer interactions (HCI) become architects' and designers' concerns in socio-cultural aspects. The proceedings of the Nineth International Conference on Computer-Aided Architectural Design Research in Asia, presents 74 papers which were selected from the 131 submissions through a blind review of 58 international reviewers. Each submission was reviewed by three reviewers and the final acceptance was based on their recommendations.
series	CAADRIA
more	www.caadria.org
last changed	2022/06/07 07:49

_id	cf2009_poster_43
id	cf2009_poster_43
authors	Oh, Yeonjoo; Ellen Yi-Luen Do, Mark D Gross, and Suguru Ishizaki
year	2009
title	Delivery Types And Communication Modalities In The Flat-Pack Furniture Design Critic
source	T. Tidafi and T. Dorta (eds) Joining Languages Cultures and Visions: CAADFutures 2009 CD-Rom
summary	A computer-based design critiquing system analyzes a proposed solution and offers critiques (Robbins 1998). Critiques help designers identify problems as well as opportunities to improve their designs. Compared with human critics, today’s computer-based critiquing systems deliver feedback in quite restricted manner. Most systems provide only negative evaluations in text; whereas studio teachers critique by interpreting the student’s design, introducing new ideas, demonstrating and giving examples, and offering evaluations (Bailey 2004; Uluoglu 2000) using speech, writing, and drawing to communicate (Anthony 1991; Schön 1983). This article presents a computer-based critiquing system, Flat-pack Furniture Design Critic (FFDC). This system supports multiple delivery types and modalities, adapting the typical system architecture of constraint-based intelligent tutors (Mitrovic et al. 2007).
keywords	Critiquing system, design critiquing
series	CAAD Futures
type	poster
email
last changed	2009/07/08 22:12

_id	2004_404
id	2004_404
authors	Pellitteri, P., Colajanni, B. and Concialdi, S.
year	2004
title	The Architectural Envelope: an Assistant for Components Design Choices
doi	https://doi.org/10.52842/conf.ecaade.2004.404
source	Architecture in the Network Society [22nd eCAADe Conference Proceedings / ISBN 0-9541183-2-4] Copenhagen (Denmark) 15-18 September 2004, pp. 404-409
summary	The global envelope to day focuses on it a lot of attention from architects, progressively replacing the classical concepts of wall and roof. It is a complex component, entrusted with the delicate goal of mediating between exterior and interior space, between a space boundary and a bearing structure. Its main parts are the glass wall, a substructure resisting the loads and transmitting them to the bearing structure, and the connection of the two. The latter, in turn, comprises a fitting and a bracket. The set of relationships between these components and sub-components needs the control of many conditions of consistency. The tool presented is an Assistant performing just this task helping the designer to select in each project situation the best couple of two main envelope components: fitting and bracket. The Assistant structure lends itself to implement an intelligent commercial product catalog. It seems also fit to manage component selections strongly conditioned by consistency constrains between collaborating elements.
keywords	Design Assistant, Envelope, Product Selection
series	eCAADe
email
last changed	2022/06/07 08:00

_id	sigradi2004_370
id	sigradi2004_370
authors	Saulo Popov Zambiasi; Lizandra G. Lupi Vergara
year	2004
title	Ambientes inteligentes computacionais aliados à arquitetura [Intelligent Computational Environments Allied to Architecture]
source	SIGraDi 2004 - [Proceedings of the 8th Iberoamerican Congress of Digital Graphics] Porte Alegre - Brasil 10-12 november 2004
summary	This work proposes a intelligent environment model to peoples with special needs. So that this intelligent environment . implemented in computer . it is efficient, a multi-level hierarchical model based on Distributed Artificial Intelligence is used, that can be applicable to any it environment or group of environments to be automated. As result, (i) it is joined computer technology to architecture; (ii) competitiveness is added to the companies of civil building construction; and (iii) it offers better life quality for the population.
keywords	Distributed Artificial Intelligence, Intelligent Environments, Architecture, People with special needs
series	SIGRADI
email
last changed	2016/03/10 09:59

_id	avocaad_2003_10
id	avocaad_2003_10
authors	Sevil Sariyildiz, Ozer Ciftcioglu, Bige Tunçer and Rudi Stouffs
year	2003
title	Knowledge Model for Cultural Analogy in Design and Design Education
source	LOCAL VALUES in a NETWORKED DESIGN WORLD - ADDED VALUE OF COMPUTER AIDED ARCHITECTURAL DESIGN, Stellingwerff, Martijn and Verbeke, Johan (Eds.), (2004) DUP Science - Delft University Press, ISBN 90-407-2507-1.
summary	Almost every architect uses analogy while designing. The source of inspiration is nature, technology, geometry, etc., besides the influence of the work of other architects. Analogy in architecture has a close relationship with culture as well. Culture is a dynamic occurrence and evolves by the influence of many aspects such as technological, economical, environmental and social. In the process of design, architects built op knowledge from their own experience and designs, but also from the other designers work. Usually, architects develop this quality and ability during the education, and later by trial and error methodwhile practising the design. This is habitually done based on own conscience, intuition and experience.The developments in ICKT (Information, Communication and Knowledge Technology) as a part of broader technological developments and the ongoing globalisation, influences the culture as a dynamic process and therefore the architecture.. It is necessary to make these influences explicit for their embedding in architectural design education of young professionals. This can be achieved by transferring the resulting knowledge to a knowledge model by using intelligent modelling techniques. The operational aspects of design analogies to be implemented in education, research and the daily practice of designing architects need attention. This paper discusses the operational aspects of cultural analogy in design by using an intelligent computational modelling approach.
keywords	Architecture, Local values, Globalisation, Computer Aided Architectural Design, ICKT, Architectural Design, Analogy, Culture, Design Education, Multiculturalism, Intelligent Modelling Techniques
series	AVOCAAD
email
last changed	2006/01/16 21:38

_id	ddss2004_d-283
id	ddss2004_d-283
authors	Van Bronswijk, J.E.M.H., L.G.H. Koren, and C.E.E. Pernot
year	2004
title	Adapting Epidemiological Methodologies to the Prediction of Health Effects of Built Environment Interventions
source	Van Leeuwen, J.P. and H.J.P. Timmermans (eds.) Developments in Design & Decision Support Systems in Architecture and Urban Planning, Eindhoven: Eindhoven University of Technology, ISBN 90-6814-155-4, p. 283-290
summary	The influence of built environments on vitality and productivity of users is paramount. Since the introduction of Industrial, Flexible and Demountable Building, domotics, smart buildings, in general: mass-produced, intelligent and learning built environments, tailored built environments are within reach. This has resulted in the need for methodologies to predict short-term and long-term health effects of different built-environment constellations. Epidemiology has developed and validated methods to assess changes in prevalence of inflictions and other unhealthy conditions, as well as the number of healthy and vital years in a life span. After analysing the relationships among building (services) parts and its combinations, health determinants (exposures) and health outcomes, we could adapt the healthy years assessment (DALY) to changes in construction (insulation, air tightness) and building services engineering (ventilation, heating) for dwellings under Dutch conditions. The most important conclusion is that natural ventilation, mechanical ventilation and balanced ventilation not only differ in their average health effect, but even more so in the size of the ranges of these effects. Other systems, such as heat pumps or photo voltaic cells are expensive but will become economically applicable when healthcare costs are taken into account. These outcomes gave valuable clues for product innovation and opened the possibility to model health in relation to built environments. The method could also be applied to quality classification systems for dwellings.
keywords	Health Prediction, Built Environment, Epidemiology, Modelling
series	DDSS
last changed	2004/07/03 22:13

_id	ascaad2004_paper14
id	ascaad2004_paper14
authors	Abdel Mohsen, Ashraf M.
year	2004
title	Future Space Cities@Universe (Digi-City Vision)
source	eDesign in Architecture: ASCAAD's First International Conference on Computer Aided Architectural Design, 7-9 December 2004, KFUPM, Saudi Arabia
summary	A template for the future city has been carved into the heavens. Ever since the beginning of humankind, we have looked to the sky for the opportunity to make a new start in our imperfect world. Between the stars and the darkness we have imagined utopias beyond the reach of our travel technologies, colonizing space with our fantasies. Now we are in the first stages of an electronic revolution, but in the future 50 years later we will be in a mega-digital era which we have to predict, work and search for the reality of that future. Our planet is recently over loaded with different problems, such as pollution, population, nature disasters. Our vast speed of technology and the curiosity of discovering the invisible, leads to study and find out the nearest Future Space Architecture. With the vast acceleration of technology and digital life, we should start to predict the future architecture on, into or behind the Earth. This paper is one of many perceptions of life and architecture behind the Earth in the digital era, Digi-City Vision.
series	ASCAAD
email
last changed	2007/04/08 19:47

For more results click below: