Cumincad : CUMINCAD Papers : Search Results

CumInCAD is a Cumulative Index about publications in Computer Aided Architectural Design
supported by the sibling associations ACADIA, CAADRIA, eCAADe, SIGraDi, ASCAAD and CAAD futures

PDF papers
References

Hits 1 to 20 of 571

Reformat results as: short short into frame detailed detailed into frame

_id	acadia04_088
id	acadia04_088
authors	Bechthold, Martin
year	2004
title	Digital Design and Fabrication of Surface Structures
doi	https://doi.org/10.52842/conf.acadia.2004.088
source	Fabrication: Examining the Digital Practice of Architecture [Proceedings of the 23rd Annual Conference of the Association for Computer Aidd Design in Architecture and the 2004 Conference of the AIA Technology in Architectural Practice Knowledge Community / ISBN 0-9696665-2-7] Cambridge (Ontario) 8-14 November, 2004, 88-99
summary	This paper presents a study in digital design and manufacturing of shells, which are material-efficient systems that generate their load-bearing capacity through curvature. Their complex shapes are challenging to build, and the few current shell projects employ the same shape repetitively in order to reduce the cost of concrete formwork. Can digital design and manufacturing technology make these systems suitable for the needs of the 21st century? The research developed new digitally-driven fabrication processes for Wood-Foam Sandwich Shells and Ferrocement-Concrete Sandwich Shells. These are partially pre-fabricated in order to allow for the application of Computer-Numerically Controlled (CNC) technology. Sandwich systems offer advantages for the digitally-enabled construction of shells, while at the same time improving their structural and thermal performance. The research defines design and manufacturing processes that reduce the need for repetition in order to save costs. Wood-Foam Sandwich shells are made by laminating wood-strips over a CNC-milled foam mold that eventually becomes the structural sandwich core. For Ferrocement-Concrete sandwich shells, a two-stage process is presented: pre-fabricated ferrocement panels become the permanent formwork for a cast-in-place concrete shell. The design and engineering process is facilitated through the use of parametric solid modeling environments. Modeling macros and integrated Finite-Element Analysis tools streamline the design process. Accuracy in fabrication is maintained by using CNC techniques for the majority of the shaping processes. The digital design and manufacturing parameters for each process are verified through design and fabrication studies that include prototypes, mockups and physical scale models.
keywords	Shell, Pre-Fabrication, Prototype, Custom-Manufacturing, Simulation
series	ACADIA
email
last changed	2022/06/07 07:54

_id	2004_286
id	2004_286
authors	Datta, Sambit
year	2004
title	A Representational Construct for Sharing Knowledge in Design Exploration
doi	https://doi.org/10.52842/conf.ecaade.2004.286
source	Architecture in the Network Society [22nd eCAADe Conference Proceedings / ISBN 0-9541183-2-4] Copenhagen (Denmark) 15-18 September 2004, pp. 286-291
summary	Exploration with formal design systems comprise iterative processes for specifying problems, finding plausible and alternative solutions, judging the validity of solutions relative to problems and reformulating problems and solutions. These processes are knowledge intensive, collaborative and multidisciplinary in nature. Recent research efforts propose representational frameworks that allow for modeling of knowledge capture, knowledge sharing and knowledge reuse during designing. However, design remains a human enterprise: to be scalable and usable in design practice, formal symbolic representations need to be embedded within a broader framework of agent (human and computational) interaction. This paper argues that, for sharing and reusing knowledge between agents in design exploration, it is necessary to build an intermediary representational structure that bridges specialist interactions with exploration knowledge (the domain) and the symbol structures that represent them (the symbol substrate). The paper identifies the requirements of such an intermediary representation for the sharing of knowledge between design agents. These requirements are addressed through the development of a shared interaction construct, the feature node.
keywords	Exploration, Design Knowledge, Interaction Model, Mixed-Initiative
series	eCAADe
last changed	2022/06/07 07:55

_id	acadia04_162
id	acadia04_162
authors	Perez, Santiago R.
year	2004
title	The Synthetic Sublime
doi	https://doi.org/10.52842/conf.acadia.2004.162
source	Fabrication: Examining the Digital Practice of Architecture [Proceedings of the 23rd Annual Conference of the Association for Computer Aided Design in Architecture and the 2004 Conference of the AIA Technology in Architectural Practice Knowledge Community / ISBN 0-9696665-2-7] Cambridge (Ontario) 8-14 November, 2004, 162-175
summary	The distinction between the artificial and the natural has been increasingly challenged as a result of advances in genetics, microbiol¬ogy, and robotics. Beginning with the molecular assemblage of organic systems into complex micro-surfaces and structures, and expanding into the realm of the macro landscape, our understanding of the term Synthetic must be revised. What is the relationship between the component (or part) and the whole, when confronted with the Synthetic? Digitally mediated fabrication technologies, combined with a renewed interest in topology and (bio)logical form, serve to challenge our preconceived notions of space and form. This inquiry will attempt to explore the relationship between traditional assemblies produced by hand, and the production of complex forms through digital rapid prototyping. The impact of D'Arcy Thompson's On Growth and Form will be considered both as a historical juncture and a contemporary source of knowledge for the exploration of new assemblages inspired by topology and biology. In particular, the organic micro-surfaces depicted in France Bourély's Hidden Beauty will be explored, in comparison with the mathematical development of organic forms inspired by Periodic Minimal Surfaces. The analysis of emerging forms and assemblages based on the notion of the Synthetic will be compared with the Organic, and considered within the context of twentieth century art and sculpture. An attempt will be made to establish new modes of inquiry for combining digital and physical explorations of space and form, influenced by advances in micro-scale structures, complex surfaces, and the history of organic form in art.
keywords	landscape, form, surface, assemblage
series	ACADIA
email
last changed	2022/06/07 08:00

_id	sigradi2004_197
id	sigradi2004_197
authors	Anja Pratschke
year	2004
title	Pinhaldigital, estrutura mnemônica e processos multimídia nas fazendas de café: História, arquitetura e tecnologia [Pinhaldigital, Mnemonic Structure and Processes of Multimedia in Coffee Farms: History, Architecture and Technology]
source	SIGraDi 2004 - [Proceedings of the 8th Iberoamerican Congress of Digital Graphics] Porte Alegre - Brasil 10-12 november 2004
summary	This article has two aims, first to discuss the use of mnemonic structures in multimedia processes with complex contents in the example of the research project and activity PinhalDigital. Moreover it intends to describe the transdisciplinar method used for the production of the application, developing didactic extracurricular and interdisciplinary activities in the areas of history, architecture and technology through the use of multimedia construction processes. PinhalDigital was born of an initiative between the University of São Paulo, the Federal University of São Carlos and the Fazenda Pinhal, as objective to structuralize and to organize the diverse layers and the multiple aspects of the rich history of the Fazenda Pinhal in São Carlos. As a mnemonic basis was chosen a painting that represents the Fazenda Pinhal in 1900 by famous painter Benedicto Calixto de Jesus, which almost realistic portrays shows diverse objects and important and identification spaces of the diverse aspects and activities carried out through this plantation.
series	SIGRADI
email
last changed	2016/03/10 09:47

_id	ddss2004_ra-279
id	ddss2004_ra-279
authors	Bax, M.F.Th. and H.M.G.J. Trum
year	2004
title	On the Notion of Level in Architecture
source	Van Leeuwen, J.P. and H.J.P. Timmermans (eds.) Recent Advances in Design & Decision Support Systems in Architecture and Urban Planning, Dordrecht: Kluwer Academic Publishers, ISBN: 1-4020-2408-8, p. 279-292
summary	The notion of Level (in a scale of Levels) is probably the most authentic notion in Architecture. Already in the work of Vitruvius the notion is implicitly present in the triad ‘ordinatio – symmetria – eurythmia’. In more recent times, the notion always appears in relation with hierarchical organization as a means of control of quality. However used in drawings and in architectural discourse, the term lacks precision; there are many types of level like abstraction, specification, dependency, resolution levels etc., but no operational definition can be found as a notion that structures architectural objects and design processes simultaneously in a consistent way. Defining this notion of Level is the purpose of this paper. An example of application in an architectural decision-making process completes the paper.
keywords	Levels, Hierarchy, Architecture, Composition, Complexity, Control
series	DDSS
last changed	2004/07/03 22:13

_id	acadia11_138
id	acadia11_138
authors	Buell, Samantha; Shaban, Ryan; Corte, Daniel; Beorkrem, Christopher
year	2011
title	Zero-waste, Flat Pack Truss Work: An Investigation of Responsive Structuralism
doi	https://doi.org/10.52842/conf.acadia.2011.138
source	ACADIA 11: Integration through Computation [Proceedings of the 31st Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA)] [ISBN 978-1-6136-4595-6] Banff (Alberta) 13-16 October, 2011, pp. 138-143
summary	The direct and rapid connections between scripting, modeling and prototyping allow for investigations of computation in fabrication. The manipulation of planar materials with two-dimensional CNC cuts can easily create complex and varied forms, volumes, and surfaces. However, the bulk of research on folding using CNC fabrication tools is focused upon surfaces, self-supporting walls and shell structures, which do not integrate well into more conventional building construction models.This paper attempts to explain the potential for using folding methodologies to develop structural members through a design-build process. Conventional building practice consists of the assembly of off-the-shelf parts. Many times, the plinth, skeleton, and skin are independently designed and fabricated, integrating multiple industries. Using this method of construction as an operative status quo, this investigation focused on a single structural component: the truss. A truss is defined as: “A triangulated arrangement of structural members that reduces nonaxial external forces to a set of axial forces in its members.” (Allen and Iano 2004)Using folding methodologies and sheet steel to create a truss, this design investigation employed a recyclable and prolific building material to redefine the fabrication of a conventional structural member. The potential for using digital design and two-dimensional CNC fabrication tools in the design of a foldable truss from sheet steel is viable in the creation of a flat-packed, minimal waste structural member that can adapt to a variety of aesthetic and structural conditions. Applying new methods to a component of the conventional ‘kit of parts’ allowed for a novel investigation that recombines zero waste goals, flat-packing potential, structural expression and computational processes.
series	ACADIA
type	normal paper
email
last changed	2022/06/07 07:54

_id	2004_248
id	2004_248
authors	Chang, Teng-Wen and Woodbury, Robert F.
year	2004
title	GEOMETRY IN HIGHLY STRUCTURED DESIGN SPACES
doi	https://doi.org/10.52842/conf.ecaade.2004.248
source	Architecture in the Network Society [22nd eCAADe Conference Proceedings / ISBN 0-9541183-2-4] Copenhagen (Denmark) 15-18 September 2004, pp. 248-254
summary	The Australian branch of the SEED project created a new formalism for design spaces in which the fundamental structuring operator is information specificity, formally characterised as subsumption. Here design space navigation is composed as combinations of the primitive operators of resolution, unification, anti-unification, search, query and hysterical undo. The structures needed to support such a view are highly constrained in a mathematical sense and it is in these constraints that the problems for representation of geometry arise. The research challenge is to add the formal design space exploration constraints into an existing geometric representation scheme or alternatively to discover a new scheme in which the constraints are realized. Based on Typed Feature Structures (TFS), Geometric Typed Feature Structures (GTFS) are a representation scheme and method for performing the basic design space exploration operations on geometric objects. The crucial insight behind extending TFS to geometry is to discover useful algebraic structures of geometric objects affording the mathematics required of TFS. In this paper we describe Geometric Typed Feature Structures through one example of form: IOPSet. Our method of exposition is both mathematical and graphical: for each structure we will demonstrate both how it meets the necessary formal conditions as well as the sorts of form-sculpting operations it enables. An architectural example: insulated enclosure is used as a demonstration of subsumption operations over IOPSet. One alternative description of insulated enclosure using GTFS is also shown in the paper.
keywords	Geometric Typed Feature Structures, SEED, Design Space Explorer, Geometric Design Information
series	eCAADe
type	normal paper
email
last changed	2022/06/07 07:56

_id	sigradi2006_e028c
id	sigradi2006_e028c
authors	Griffith, Kenfield; Sass, Larry and Michaud, Dennis
year	2006
title	A strategy for complex-curved building design:Design structure with Bi-lateral contouring as integrally connected ribs
source	SIGraDi 2006 - [Proceedings of the 10th Iberoamerican Congress of Digital Graphics] Santiago de Chile - Chile 21-23 November 2006, pp. 465-469
summary	Shapes in designs created by architects such as Gehry Partners (Shelden, 2002), Foster and Partners, and Kohn Peterson and Fox rely on computational processes for rationalizing complex geometry for building construction. Rationalization is the reduction of a complete geometric shape into discrete components. Unfortunately, for many architects the rationalization is limited reducing solid models to surfaces or data on spread sheets for contractors to follow. Rationalized models produced by the firms listed above do not offer strategies for construction or digital fabrication. For the physical production of CAD description an alternative to the rationalized description is needed. This paper examines the coupling of digital rationalization and digital fabrication with physical mockups (Rich, 1989). Our aim is to explore complex relationships found in early and mid stage design phases when digital fabrication is used to produce design outcomes. Results of our investigation will aid architects and engineers in addressing the complications found in the translation of design models embedded with precision to constructible geometries. We present an algorithmically based approach to design rationalization that supports physical production as well as surface production of desktop models. Our approach is an alternative to conventional rapid prototyping that builds objects by assembly of laterally sliced contours from a solid model. We explored an improved product description for rapid manufacture as bilateral contouring for structure and panelling for strength (Kolarevic, 2003). Infrastructure typically found within aerospace, automotive, and shipbuilding industries, bilateral contouring is an organized matrix of horizontal and vertical interlocking ribs evenly distributed along a surface. These structures are monocoque and semi-monocoque assemblies composed of structural ribs and skinning attached by rivets and adhesives. Alternative, bi-lateral contouring discussed is an interlocking matrix of plywood strips having integral joinery for assembly. Unlike traditional methods of building representations through malleable materials for creating tangible objects (Friedman, 2002), this approach constructs with the implication for building life-size solutions. Three algorithms are presented as examples of rationalized design production with physical results. The first algorithm [Figure 1] deconstructs an initial 2D curved form into ribbed slices to be assembled through integral connections constructed as part of the rib solution. The second algorithm [Figure 2] deconstructs curved forms of greater complexity. The algorithm walks along the surface extracting surface information along horizontal and vertical axes saving surface information resulting in a ribbed structure of slight double curvature. The final algorithm [Figure 3] is expressed as plug-in software for Rhino that deconstructs a design to components for assembly as rib structures. The plug-in also translates geometries to a flatten position for 2D fabrication. The software demonstrates the full scope of the research exploration. Studies published by Dodgson argued that innovation technology (IvT) (Dodgson, Gann, Salter, 2004) helped in solving projects like the Guggenheim in Bilbao, the leaning Tower of Pisa in Italy, and the Millennium Bridge in London. Similarly, the method discussed in this paper will aid in solving physical production problems with complex building forms. References Bentley, P.J. (Ed.). Evolutionary Design by Computers. Morgan Kaufman Publishers Inc. San Francisco, CA, 1-73 Celani, G, (2004) “From simple to complex: using AutoCAD to build generative design systems” in: L. Caldas and J. Duarte (org.) Implementations issues in generative design systems. First Intl. Conference on Design Computing and Cognition, July 2004 Dodgson M, Gann D.M., Salter A, (2004), “Impact of Innovation Technology on Engineering Problem Solving: Lessons from High Profile Public Projects,” Industrial Dynamics, Innovation and Development, 2004 Dristas, (2004) “Design Operators.” Thesis. Massachusetts Institute of Technology, Cambridge, MA, 2004 Friedman, M, (2002), Gehry Talks: Architecture + Practice, Universe Publishing, New York, NY, 2002 Kolarevic, B, (2003), Architecture in the Digital Age: Design and Manufacturing, Spon Press, London, UK, 2003 Opas J, Bochnick H, Tuomi J, (1994), “Manufacturability Analysis as a Part of CAD/CAM Integration”, Intelligent Systems in Design and Manufacturing, 261-292 Rudolph S, Alber R, (2002), “An Evolutionary Approach to the Inverse Problem in Rule-Based Design Representations”, Artificial Intelligence in Design ’02, 329-350 Rich M, (1989), Digital Mockup, American Institute of Aeronautics and Astronautics, Reston, VA, 1989 Schön, D., The Reflective Practitioner: How Professional Think in Action. Basic Books. 1983 Shelden, D, (2003), “Digital Surface Representation and the Constructability of Gehry’s Architecture.” Diss. Massachusetts Institute of Technology, Cambridge, MA, 2003 Smithers T, Conkie A, Doheny J, Logan B, Millington K, (1989), “Design as Intelligent Behaviour: An AI in Design Thesis Programme”, Artificial Intelligence in Design, 293-334 Smithers T, (2002), “Synthesis in Designing”, Artificial Intelligence in Design ’02, 3-24 Stiny, G, (1977), “Ice-ray: a note on the generation of Chinese lattice designs” Environmental and Planning B, volume 4, pp. 89-98
keywords	Digital fabrication; bilateral contouring; integral connection; complex-curve
series	SIGRADI
email
last changed	2016/03/10 09:52

_id	acadia04_076
id	acadia04_076
authors	Hanna, Sean
year	2004
title	Modularity and Flexibility at the Small Scale: Evolving Continuous Material Variation with Stereolithography
doi	https://doi.org/10.52842/conf.acadia.2004.076
source	Fabrication: Examining the Digital Practice of Architecture [Proceedings of the 23rd Annual Conference of the Association for Computer Aided Design in Architecture and the 2004 Conference of the AIA Technology in Architectural Practice Knowledge Community / ISBN 0-9696665-2-7] Cambridge (Ontario) 8-14 November, 2004, 76-87
summary	In this paper, we introduce a technique by which the internal material properties of an object can be optimised at a microstructural level (5x10-5m) to counteract the forces that are applied to it. These can then be fabricated using the rapid prototyping method of stereolithography. The proposed technique is analogous to principles of mass customization and takes advantage of a flexible module to create complex structures in a manner that is computationally efficient and effective. The process is two-staged, in which a genetic algorithm evolves the topology of the microstructure and a second algorithm incorporating Finite Element Analysis then optimises the geometry. The examples shown are designed specifically for the fabrication technique, but the method and general principles are applicable to structural problems at any scale.
keywords	genetic algorithm, rapid prototyping, stereolithography, materials
series	ACADIA
email
last changed	2022/06/07 07:50

_id	acadia03_040
id	acadia03_040
authors	Katherine A. Liapi, Katherine A. and Kim, Jinman
year	2003
title	A Parametric Approach to the Design of a Tensegrity Vaulted Dome for an Ephemeral Structure for the 2004 Olympics
doi	https://doi.org/10.52842/conf.acadia.2003.301
source	Connecting >> Crossroads of Digital Discourse [Proceedings of the 2003 Annual Conference of the Association for Computer Aided Design In Architecture / ISBN 1-880250-12-8] Indianapolis (Indiana) 24-27 October 2003, pp. 301-309
summary	Tensegrity, defined as “tensional integrity,” is central to the design of a semi-open exhibition space that was submitted as an entry to the international competition for the design of “Ephemeral Structures for the City of Athens,” in the context of the 2004 Olympic Games. The main feature of the proposed exhibition space is a vaulted dome composed of interconnected detachable and deployable tensegrity units. The most challenging aspect in the design of the tensegrity vault was the generation of alternative spatial configurations for form exploration and study. For this purpose a mathematical code has been developed that links all the parameters that affect the design of tensegrity vaults. The code also allows for the parametric graphical generation of the vault by displaying geometric information in a 3D environment. This paper discusses the geometric basis of the code and its usefulness in the morphological study of the tensegrity vaulted dome for the proposed ephemeral structure. The mathematical code has been shown to significantly facilitate the study of various preliminary configurations of tensegrity vaulted structures.
series	ACADIA
email
last changed	2022/06/07 07:52

_id	ijac20032207
id	ijac20032207
authors	Liapi, Katherine A.; Kim, Jinman
year	2004
title	A Parametric Approach to the Design of Vaulted Tensegrity Networks
source	International Journal of Architectural Computing vol. 2 - no. 2
summary	Significant new research in tensegrity theory and technology encourages tensegrity’s implementation in architecture. A recently developed technology makes possible the rapid modular assembly of deployable tensegrity units, and the construction of alternate curved configurations by re-using the same modules. Although a form exploration method for tensegrity structures already exists, estimating the structure’s new geometry remains a challenge due to difficulties designers encounter in understanding and following the method’s geometric construction process. Besides, the method doesn’t address the geometry of vaulted configurations. This paper presents algorithms that link together the geometric parameters that determine the shape of tensegrity vaults by addressing different design-construction scenarios, and a software code that generates parametric models of tensegrity vaulted structures.The application of the algorithms to the morphological study of a tensegrity vaulted dome, which constituted the main feature of an entry to arecent international architectural competition, is also presented.
series	other
type	normal paper
more	http://www.multi-science.co.uk/ijac.htm
last changed	2010/05/16 09:13

_id	acadia04_100
id	acadia04_100
authors	Liapi, Katherine
year	2004
title	A computer Based System for the Design and Fabrication of Tensegrity Structures
doi	https://doi.org/10.52842/conf.acadia.2004.100
source	Fabrication: Examining the Digital Practice of Architecture [Proceedings of the 23rd Annual Conference of the Association for Computer Aided Design in Architecture and the 2004 Conference of the AIA Technology in Architectural Practice Knowledge Community / ISBN 0-9696665-2-7] Cambridge (Ontario) 8-14 November, 2004, 100-109
summary	Tensegrity structures are composed of tension compression components, where the compression components (bars) are discontinuously enclosed within continuous tensile components (cables). From an engineering point of view, a tensegrity structure is characterized by geometric non-linearity and large displacements under loading. Therefore, its prestressed shape and deformation under loading are the result of the combined effect of the geometric parameters that determine the initial configuration of the structure, the level of prestress applied to cables, and the material properties of the component members of the structure. A method for generating the initial geometric configuration of tensegrity structures composed of tensegrity units and a parametric expression of this geometry have already been developed. A novel technology that makes possible the construction of tensegrity structures from the on-site assembly of deployable tensegrity units, which are furnished with a simple mechanism that permits bar-elongation, and, as a result, an increase of the prestress applied to the cables of each unit, is also under development. Also under development is a static analysis method that takes into account the above method for prestressing cables. This paper discusses the features of a system that supports the combined geometric and structural design of tensegrity structures, and integrates a graphical interface to display: a) models of initial geometry, b) geometry of the structure after prestress and loading are applied, and c) magnitude of forces applied to the structure’s component members (bars and cables). The system also provides numerical data to be used in component fabrication, and is therefore expected to become a very valuable tool for the design and construction of tensegrity structures.
series	ACADIA
last changed	2022/06/07 07:59

_id	a0d4
id	a0d4
authors	Rosa Enrich, Andrea Carnicero, Gustavo Fornari & Pedro Orazzi
year	2004
title	ANALYSIS AND EVALUATION OF MATHEMATICAL LEARNING STRUCTURES
source	Proceedings of the Fourth International Conference of Mathematics & Design, Spetial Edition of the Journal of Mathematics & Design, Volume 4, No.1, pp. 13-21.
summary	Abstract: A series of practical tasks have been done under the general name of “Surfaces in invisible cities”. Each task was based on a story taken from the book The Invisible Cities by Italo Calvino. The research carried out allows to design a pedagogical project which makes evident , generates and connects several intentions, motivations and learning structures. It proposes the use of multi- level languages and readings. Therefore, each task takes more time than that of the proposed mathematical class. Its implementation generates a broader view than that seen at the time of design. From the detailed analysis of the results obtained, the following diverse pedagogical aspects of this work project arise: a. The use of several multiple intelligence: Howard Gardner (1985) found that a man has several distinct intelligence types among which Logical-Mathematical; Spatial; Linguistic -oriented; Musical; Intra-personal; Kinesthetic-Corporal; Interpersonal stand out. Only those types used in the task will be analyzed, making a brief description of each type. b. The architectonic-city planning aspects: architectonic-city planning interpretation of the space imagined after reading the text, with the purpose of identifying figures, shapes, volumes and colors which are expressed via an analogous space. They consist of visual, architectonic and territorial speculations without a rigorous spatial theory and it is pretended that they possess a technical precision at mathematical concept level. c. The mathematical contents: a study of the conical and square shapes present in the designs done and used in a creative manner in students’ compositions following the reading of the story chosen is carried out. An analysis of shapes is performed and mathematical problems are posed within the design context. Traditional sketching methods have been used in task solving and the possibilities offered by the virtual tools are analyzed. Emphasis has been put on the vertical and horizontal interchanges in the Chair, generating changes in knowledge transmission perspectives, thus allowing the sharing of contents, abilities and resources. The architectonic work imagined and created by the students will focus on these different working lines creating a harmonious and significant whole. The work is the result of multiple connections and creative proposals.
keywords	city, geometry, multiple intelligence
series	other
type	normal paper
email
last changed	2005/04/07 12:46

_id	2004_586
id	2004_586
authors	Voigt, A., Martens, B. and Linzer, H.
year	2004
title	City Simulator - A Multi-dimensional VR-Simulation Environment
doi	https://doi.org/10.52842/conf.ecaade.2004.586
source	Architecture in the Network Society [22nd eCAADe Conference Proceedings / ISBN 0-9541183-2-4] Copenhagen (Denmark) 15-18 September 2004, pp. 586-592
summary	Whether in splendid rural isolation or in an urban area, settlement and building structures always are exposed to the public. Questions as to the future design of our vital space basically always concern the public and thus call for a great deal of discussion. Launching a well-balanced debate between all those involved in the planning and design process requires clear exemplification of urban-spatial visions by means of simulation. A simulation device - called “City Simulator” - suited to conveying the multitude of spatial relations within the urban configuration and for developing urban-spatial ideas would fulfil such expectations. The complexity of the information required in this context can be coped with effectively by means of computer-aided simulation techniques focusing on digital city models. Thus the implementation of a “City Simulator” may be regarded as a decisive tool for the purpose. As those involved in the process normally consider themselves absolute novices within the context of complex planning processes, the simulator will to some extent act as a “translation machine”. This paper is based on a project proposal which has been submitted by the authors aimed at the acquisition of a “City Simulator” at Vienna University of Technology in the near future.
keywords	3D City Models; Simulation; Virtual Reality; Visualization; Communication
series	eCAADe
email
last changed	2022/06/07 07:58

_id	2004_553
id	2004_553
authors	Wojtowicz, J., Shakarchi, A. and Takeyama, M.
year	2004
title	dWall – Case of VDS Baghdad
doi	https://doi.org/10.52842/conf.ecaade.2004.553
source	Architecture in the Network Society [22nd eCAADe Conference Proceedings / ISBN 0-9541183-2-4] Copenhagen (Denmark) 15-18 September 2004, pp. 553-557
summary	Virtual Design Studio students and teachers of architecture in Canada, Japan and United Arab Emirates worked on the central area of University of Baghdad and examined its main square by proposing designs ideas and projects while sharing dynamic web portal. The narrative aspect of the digital media redefines the nature of design practice by making the creative process more democratic and transparent. Communicating design progress across temporal and geographic borders we can publish it instantly and make design accessible at different stages of its development for the benefit of distant collaborators, as well as general public. Baghdad remains site of traumatic conflict. Approaching aftermath of this war, creates unique opportunity to challenge the role of students of design. Among issues raised by this studio were: While apart - we will share and design for the betterment of the future condition of man people. We will consider not only possible futures, but also importance of the tradition while constructing our proposals in hope for both peace and democracy. However, the ongoing Globalization patterns are subject to the growing reassessment by many. What is the role of the central square in the campus of University of Baghdad in the XXI century? How can architecture and new media contribute to the peace making under such a circumstance as Iraq is facing at present? These were fundamental questions that the students needed to deal with. This paper presents the dynamic collaborative environment as well as diverse Digital Democracy Wall projects formulated in this distributed situation.
keywords	Virtual Design Studio; VDS; Baghdad; Architecture; Democracy
series	eCAADe
last changed	2022/06/07 07:57

_id	050224_li-a
id	050224_li-a
authors	Yeh, Li-Hsuen
year	2004
title	Bubble - Trouble
source	ETH postgraduate studies final thesis, Zurich
summary	In this thesis I would like to explore the bubble structure, seek a possibility to use computer programming to reinterpret soap bubble structure. Architecture today is not only built by concrete, steel and glasses anymore. Our power of the new tools will help us to discover the variety of prototypes. Beside a data-driven structure can change shape and define itself by the users. Wherefore structures will be able to adapt themselves physically to changing circumstances, instead of collecting sudden circumstances to enhance the architecture itself.
series	thesis:MSc
last changed	2005/09/09 12:58

_id	2004_228
id	2004_228
authors	Özener, Ozan Önder, Akleman, Ergun and Srinivasan, Vinod
year	2004
title	Interactive Rind Modeling for Architectural Design
doi	https://doi.org/10.52842/conf.ecaade.2004.228
source	Architecture in the Network Society [22nd eCAADe Conference Proceedings / ISBN 0-9541183-2-4] Copenhagen (Denmark) 15-18 September 2004, pp. 228-237
summary	The paper presents a new modeling technique for architectural design. Rind modeling provides for the easy creation of surfaces resembling peeled and punctured rinds. We show how the method‘s two main steps of 1) creation of a shell or crust 2) opening holes in the crust by punching or peeling can be encapsulated into a real time semi-automatic interactive algorithm. We include a number of worked examples, some by students in a special modeling workshop that demonstrate the ease with which a large variety of intricate rind shapes can be created. Rind modeling method allows us developing a user-friendly tool for designers and architects. The new tool extends the abilities of polygonal modeling and allows designers to work on structured and consistent models for architectural design purposes. Rind modeling gives architects and designers a processing flexibility. It can be used in conceptual modeling during the early design phase. It can also be efficiently used for creating variety of shell structures for architectural design.
keywords	CAAD, Digital Design, 3D Modeling, Subdivision Surfaces
series	eCAADe
last changed	2022/06/07 07:57

_id	ddss2004_ra-293
id	ddss2004_ra-293
authors	Chang, T.-W.
year	2004
title	Supporting Design Learning with Design Puzzles
source	Van Leeuwen, J.P. and H.J.P. Timmermans (eds.) Recent Advances in Design & Decision Support Systems in Architecture and Urban Planning, Dordrecht: Kluwer Academic Publishers, ISBN: 1-4020-2408-8, p. 293-307
summary	The design process is a puzzle-solving process. Two groups of researches that share many similarities with Puzzle-solving design process are the process of game-playing and playful learning. The main argument is using the “playing” characteristics to amplify and explore the learning process, furthermore the design process. In addition, puzzles imply playful exploration that utilizes the characteristics of “playing a game” as “solving a puzzle”. Puzzle making and puzzle solving provides an incremental exploration mechanism that is more intuitive for design learning. For understanding and realizing puzzles in design learning, this research is divided into two stages of researches—manual design puzzles and interactive design puzzles. By analysing the outcome from manual design puzzles, this research proposes a framework called (interactive) “design puzzles”. The conceptual and implementation framework of this view of design is elaborated in this paper as well as a particular design puzzle called puzzle collage is described as the realization of design puzzles.
keywords	Design Puzzles, Design Collage, Puzzle-Making, Andragogy, Game Play
series	DDSS
last changed	2004/07/03 22:13

_id	20ff
id	20ff
authors	Derix, Christian
year	2004
title	Building a Synthetic Cognizer
source	Design Computation Cognition conference 2004, MIT
summary	Understanding ‘space’ as a structured and dynamic system can provide us with insight into the central concept in the architectural discourse that so far has proven to withstand theoretical framing (McLuhan 1964). The basis for this theoretical assumption is that space is not a void left by solid matter but instead an emergent quality of action and interaction between individuals and groups with a physical environment (Hillier 1996). In this way it can be described as a parallel distributed system, a self-organising entity. Extrapolating from Luhmann’s theory of social systems (Luhmann 1984), a spatial system is autonomous from its progenitors, people, but remains intangible to a human observer due to its abstract nature and therefore has to be analysed by computed entities, synthetic cognisers, with the capacity to perceive. This poster shows an attempt to use another complex system, a distributed connected algorithm based on Kohonen’s self-organising feature maps – SOM (Kohonen 1997), as a “perceptual aid” for creating geometric mappings of these spatial systems that will shed light on our understanding of space by not representing space through our usual mechanics but by constructing artificial spatial cognisers with abilities to make spatial representations of their own. This allows us to be shown novel representations that can help us to see new differences and similarities in spatial configurations.
keywords	architectural design, neural networks, cognition, representation
series	other
type	poster
email
more	http://www.springer.com/computer/ai/book/978-1-4020-2392-7
last changed	2012/09/17 21:13

_id	ascaad2004_paper14
id	ascaad2004_paper14
authors	Abdel Mohsen, Ashraf M.
year	2004
title	Future Space Cities@Universe (Digi-City Vision)
source	eDesign in Architecture: ASCAAD's First International Conference on Computer Aided Architectural Design, 7-9 December 2004, KFUPM, Saudi Arabia
summary	A template for the future city has been carved into the heavens. Ever since the beginning of humankind, we have looked to the sky for the opportunity to make a new start in our imperfect world. Between the stars and the darkness we have imagined utopias beyond the reach of our travel technologies, colonizing space with our fantasies. Now we are in the first stages of an electronic revolution, but in the future 50 years later we will be in a mega-digital era which we have to predict, work and search for the reality of that future. Our planet is recently over loaded with different problems, such as pollution, population, nature disasters. Our vast speed of technology and the curiosity of discovering the invisible, leads to study and find out the nearest Future Space Architecture. With the vast acceleration of technology and digital life, we should start to predict the future architecture on, into or behind the Earth. This paper is one of many perceptions of life and architecture behind the Earth in the digital era, Digi-City Vision.
series	ASCAAD
email
last changed	2007/04/08 19:47

For more results click below: