Cumincad : CUMINCAD Papers : Search Results

CumInCAD is a Cumulative Index about publications in Computer Aided Architectural Design
supported by the sibling associations ACADIA, CAADRIA, eCAADe, SIGraDi, ASCAAD and CAAD futures

PDF papers
References

Hits 1 to 20 of 465

Reformat results as: short short into frame detailed detailed into frame

_id	ddss2004_ra-325
id	ddss2004_ra-325
authors	Rodrigues, D.S., L.C.L. Souza, and J.F.G. Mendes
year	2004
title	Enhancing 3DSkyView Extension Performance
source	Van Leeuwen, J.P. and H.J.P. Timmermans (eds.) Recent Advances in Design & Decision Support Systems in Architecture and Urban Planning, Dordrecht: Kluwer Academic Publishers, ISBN: 1-4020-24088, p. 325-340
summary	This paper presents a second version of the 3DSkyView extension. The purpose of that extension was to implement a calculation algorithm for assessment and visualization of sky view factors (SVF) by means of tools available in a Geographical Information System (GIS). The sky view factor is a thermal and geometric parameter pointed out in the specialized literature as one of the main causes of urban heat islands. A 3D-GIS is a powerful tool for reaching the goal of this research because it allows the storage, treatment and analysis of tri-dimensional urban data, in addition to a high level of flexibility for incorporating calculation algorithms. The objective in the 3DSkyView extension is to optimize the determination of that factor, not only reducing its demanding calculation and graphical representation time, but also generating a simplified tool for replacing expensive photographic equipment usually applied on this matter. Enhancing functions of ArcView GIS 3.2, the first version of that extension showed a very good performance allowing the automatic delineation and determination of SVF. That performance was although limited to a single observer point. The simulation of SVF for several view points in urban canyons was only possible by applying the extension as many times as the number of observers considered. Therefore, this second version was now developed in order to allow simultaneous determination of SVF for many view points. In addition, the 3DSkyView new interface is more flexible, in a way that the user may choose the kind of output wanted (graphical and/or tabular). With this new feature it is then easier to create a continuous SVF map for an entire area.
keywords	Sky View Factor, Urban Geometry, GIS Extension, Urban Heat Island
series	DDSS
last changed	2004/07/03 22:13

_id	acadia20_38
id	acadia20_38
authors	Mueller, Stephen
year	2020
title	Irradiated Shade
source	ACADIA 2020: Distributed Proximities / Volume I: Technical Papers [Proceedings of the 40th Annual Conference of the Association of Computer Aided Design in Architecture (ACADIA) ISBN 978-0-578-95213-0]. Online and Global. 24-30 October 2020. edited by B. Slocum, V. Ago, S. Doyle, A. Marcus, M. Yablonina, and M. del Campo. 38-46.
doi	https://doi.org/10.52842/conf.acadia.2020.1.038
summary	The paper details computational mapping and modeling techniques from an ongoing design research project titled Irradiated Shade, which endeavors to develop and calibrate a computational toolset to uncover, represent, and design for the unseen dangers of ultraviolet radiation, a growing yet underexplored threat to cities, buildings, and the bodies that inhabit them. While increased shade in public spaces has been advocated as a strategy for “mitigation [of] climate change” (Kapelos and Patterson 2014), it is not a panacea to the threat. Even in apparent shade, the body is still exposed to harmful, ambient, or “scattered” UVB radiation. The study region is a binational metroplex, a territory in which significant atmospheric pollution and the effects of climate change (reduced cloud cover and more “still days” of stagnant air) amplify the “scatter” of ultraviolet wavelengths and UV exposure within shade, which exacerbates urban conditions of shade as an “index of inequality” (Bloch 2019) and threatens public health. Exposure to indirect radiation correlates to the amount of sky visible from the position of an observer (Gies and Mackay 2004). The overall size of a shade structure, as well as the design of openings along its sides, can greatly impact the UV protection factor (UPF) (Turnbull and Parisi 2005). Shade, therefore, is more complex than ubiquitous urban and architectural “sun” and “shadow studies” are capable of representing, as such analyses flatten the three-dimensional nature of radiation exposure and are “blind” to the ultraviolet spectrum. “Safe shade” is contingent on the nuances of the surrounding built environment, and designers must be empowered to observe and respond to a wider context than current representational tools allow.
series	ACADIA
type	paper
email
last changed	2023/10/22 12:06

_id	eaea2003_11-bremer-sander
id	eaea2003_11-bremer-sander
authors	Bremer, S. and Sander, H.
year	2004
title	View from the Road: Environmental Simulation for the Fractal City of Rhine Ruhr
source	Spatial Simulation and Evaluation - New Tools in Architectural and Urban Design [Proceedings of the 6th European Architectural Endoscopy Association Conference / ISBN 80-227-2088-7], pp. 43-47
summary	Highway seems to be more an issue of traffic planning than of urban design. But the highway can be a very important factor for the modern city pattern. Highways shape the spatial form of the fractal city. The modern highway can define new cores outside and “interior edges” within the city. Seen as a planning tool, highways are the great neglected opportunity in city and regional design. The 1st Architecture Biennial, 1ab, taking place from May 2003 to July 2003 in Rotterdam, explores the creative potentials of modern highways worldwide. An international research team discovered the spatial functions of highways in modern agglomerations. This lecture will give an overview of the results of the worldwide analyses and the design projects that had been undertaken. Both authors are members of the German research team. The German team examined the A 42 running through the Ruhrgebiet, a former coal and steal area in western Germany. The Ruhr Area is converting from an industrially orientated region to an agglomeration of high technology and science. But the regional image remains the same due to the fact that the changes cannot be seen, neither physically, nor from the road. Here, the highway could be used as a catalyst supporting and structuring the spatial changes to make them more legible for the people of Rhine-Ruhr. The nature becomes the most important tool of highway design. Landscape forms a linkage between the different cities of the region. Together with the A 40 and other local highways the region becomes the most important (and largest) public space of the new Rhine-Ruhr. The highway seen as a work of urban art can be designed only from the perspective of the driving car.
series	EAEA
more	http://info.tuwien.ac.at/eaea
last changed	2005/09/09 10:43

_id	ddss2008-08
id	ddss2008-08
authors	Koshak, Nabeel A.; Abdullah Fouda
year	2008
title	Analyzing Pedestrian Movement in Mataf Using GPSand GIS to Support Space Redesign
source	H.J.P. Timmermans, B. de Vries (eds.) 2008, Design & Decision Support Systems in Architecture and Urban Planning, ISBN 978-90-6814-173-3, University of Technology Eindhoven, published on CD
summary	Evaluating the use of architectural and urban spaces is an important issue for architects and urban designers who wish to enhance space usability. Space usability is crucial in crowded spaces such as Mataf areas. Millions of people come to the city of Makkah, Saudi Arabia every year to perform Hajj (Islamic Pilgrimage) and Umrah. A cornerstone of Hajj and Umrah spirituals is to perform Tawaf, which is the circumambulation of the Ka'bah in the center of the Holy Mosque in Makkah. The areas of performing Tawaf (called Mataf) become very crowded during Hajj and the last ten days of Ramadan. This paper demonstrates how we utilized Global Positioning Systems (GPS) and Geographic Information Systems (GIS) to analyze pedestrian movement while performing Tawaf. During the Hajj of 1424 H (2004 in the Georgian Calendar), several GPS devices were used to collect pedestrian movement coordinates at specific time intervals. Computer software for tracking analysis is used to visualize and analyze the pattern of pedestrian movement in Tawaf. The software allows users to view temporal data, which can be set up with past time windows for historical data analysis. The findings of this research show levels of service and flow rates throughout different zones and times of Mataf. They indicate the most critical zones and times for Tawaf during Hajj. They also visually demonstrate the track pattern of pedestrian movement at different locations in the Tawaf area. The paper concludes with some redesign recommendations to remove obstacles and facilitate pedestrian movement in Tawaf. The approach described in this paper can be implemented in architectural and urban design space modifications to improve pedestrian movement in open spaces.
keywords	Pedestrian movement analysis, GPS, GIS, Hajj, Makkah, Tawaf
series	DDSS
last changed	2008/09/01 17:06

_id	sigradi2004_342
id	sigradi2004_342
authors	Marcela Pizzi; Andrés Cavieres; Eleonor Pérez
year	2004
title	Hacia una semiótica de la hiperciudad [Towards a Semiotics of the Hypercity]
source	SIGraDi 2004 - [Proceedings of the 8th Iberoamerican Congress of Digital Graphics] Porte Alegre - Brasil 10-12 november 2004
summary	This research is the summing up of an investigation carried out within the frame of a undergraduated architectural seminary at Facultad de Arquitectura y Urbanismo de la Universidad de Chile. During one semester, the research focused on finding the most relevant and recognizable features related with the globalization phenomena and the new technologies of communication that are taking place in the city. Inquiring new types of relationships which might be generating between citizens and their territory is the main achievement. More specifically, we want to explore new meanings that the contemporary city might have for people, from their different social, economical and cultural conditions. The analysis considers three points of view or definitions: Capitalist Definition, Political Definition and Sociological Definition.
keywords	Hypercity, urban image, territory, citizens
series	SIGRADI
email
last changed	2016/03/10 09:55

_id	cf2011_p018
id	cf2011_p018
authors	Sokmenoglu, Ahu; Cagdas Gulen, Sariyildiz Sevil
year	2011
title	A Multi-dimensional Exploration of Urban Attributes by Data Mining
source	Computer Aided Architectural Design Futures 2011 [Proceedings of the 14th International Conference on Computer Aided Architectural Design Futures / ISBN 9782874561429] Liege (Belgium) 4-8 July 2011, pp. 333-350.
summary	The paper which is proposed here will introduce an ongoing research project aiming to research data mining as a methodology of knowledge discovery in urban feature analysis. To address the increasing multi-dimensional and relational complexity of urban environments requires a multidisciplinary approach to urban analysis. This research is an attempt to establish a link between knowledge discovery methodologies and automated urban feature analysis. Therefore, in the scope of this research we apply data mining methodologies for urban analysis. Data mining is defined as to extract important patterns and trends from raw data (Witten and Frank, 2005). When applied to discover relationships between urban attributes, data mining can constitute a methodology for the analysis of multi-dimensional relational complexity of urban environments (Gil, Montenegro, Beirao and Duarte, 2009) The theoretical motivation of the research is derived by the lack of explanatory urban knowledge which is an issue since 1970‚Äôs in the area of urban research. This situation is mostly associated with deductive methods of analysis. The analysis of urban system from the perspective of few interrelated factors, without considering the multi-dimensionality of the system in a deductive fashion was not been explanatory enough. (Jacobs, 1961, Lefebvre, 1970 Harvey, 1973) To address the multi-dimensional and relational complexity of urban environments requires the consideration of diverse spatial, social, economic, cultural, morphological, environmental, political etc. features of urban entities. The main claim is that, in urban analysis, there is a need to advance from traditional one dimensional (Marshall, 2004) description and classification of urban forms (e.g. Land-use maps, Density maps) to the consideration of the simultaneous multi-dimensionality of urban systems. For this purpose, this research proposes a methodology consisting of the application of data mining as a knowledge discovery method into a GIS based conceptual urban database built out of official real data of Beyoglu. Generally, the proposed methodology is a framework for representing and analyzing urban entities represented as objects with properties (attributes). It concerns the formulation of an urban entity‚Äôs database based on both available and non-available (constructed from available data) data, and then data mining of spatial and non-spatial attributes of the urban entities. Location or position is the primary reference basis for the data that is describing urban entities. Urban entities are; building floors, buildings, building blocks, streets, geographically defined districts and neighborhoods etc. Urban attributes are district properties of locations (such as land-use, land value, slope, view and so forth) that change from one location to another. Every basic urban entity is unique in terms of its attributes. All the available qualitative and quantitative attributes that is relavant (in the mind of the analyst) and appropriate for encoding, can be coded inside the computer representation of the basic urban entity. Our methodology is applied by using the real and official, the most complex, complete and up-to-dataset of Beyoglu (a historical neighborhood of Istanbul) that is provided by the Istanbul Metropolitan Municipality (IBB). Basically, in our research, data mining in the context of urban data is introduced as a computer based, data-driven, context-specific approach for supporting analysis of urban systems without relying on any existing theories. Data mining in the context of urban data; ‚Ä¢ Can help in the design process by providing site-specific insight through deeper understanding of urban data. ‚Ä¢ Can produce results that can assist architects and urban planners at design, policy and strategy levels. ‚Ä¢ Can constitute a robust scientific base for rule definition in urban simulation applications such as urban growth prediction systems, land-use simulation models etc. In the paper, firstly we will present the framework of our research with an emphasis on its theoretical background. Afterwards we will introduce our methodology in detail and finally we will present some of important results of data mining analysis processed in Rapid Miner open-source software. Specifically, our research define a general framework for knowledge discovery in urban feature analysis and enable the usage of GIS and data mining as complementary applications in urban feature analysis. Acknowledgments I would like to thank to Nuffic, the Netherlands Organization for International Cooperation in Higher Education, for funding of this research. I would like to thank Ceyhun Burak Akgul for his support in Data Mining and to H. Serdar Kaya for his support in GIS.
keywords	urban feature analysis, data mining, urban database, urban complexity, GIS
series	CAAD Futures
email
last changed	2012/02/11 19:21

_id	ddss2008-33
id	ddss2008-33
authors	Charlton, James A.; Bob Giddings and Margaret Horne
year	2008
title	A survey of computer software for the urban designprocess
source	H.J.P. Timmermans, B. de Vries (eds.) 2008, Design & Decision Support Systems in Architecture and Urban Planning, ISBN 978-90-6814-173-3, University of Technology Eindhoven, published on CD
summary	Urban design is concerned with the shape, the surface and the physical arrangement of all kinds of urban elements, the basic components that make up the built environment, at the level of buildings, spaces and human activities. It is also concerned with the non-visual aspects of the environment, such as noise, wind and temperature and humidity. The city square is a particular urban element which can take many forms and its geometrical relationships such as maximum dimensions, ratio of width to length and building height to length have been analysed for centuries (Alberti 1475), (Vitruvius 1550), (Sitte 1889), (Corbett 2004). Within the current urban design process there are increasing examples of three dimensional computer representations which allow the user to experience a visual sense of the geometry of city squares in an urban landscape. Computer-aided design and Virtual Reality technologies have recently contributed to this visual assessment, but there have been limited attempts at 3D computer representations which allow the user to experience a greater sense of the urban space. This paper will describe a survey of computer tools which could support a more holistic approach to urban design and which could be used to simulate a number of urban texture and urban quality aspects. It will provide a systematic overview of currently available software that could support the simulation of building density, height, colour and style as well as conditions relating to noise, shading, heat, natural and artificial light. It will describe a methodology for the selection and filtering of appropriate computer applications and offer an initial evaluation of these tools for the analysis and representation of the three-dimensional geometry, urban texture and urban quality of city centre spaces. The paper is structured to include an introduction to the design criteria relating to city centre spaces which underpins this research. Next the systematic review of computer software will be described, and selected tools will undergo initial evaluation. Finally conclusions will be drawn and areas for future research identified.
keywords	Urban design, Software identification, 3D modelling, Pedestrian modelling, Wind modelling, Noise mapping, Thermal comfort, VR Engine
series	DDSS
last changed	2008/09/01 17:06

_id	2004_480
id	2004_480
authors	Mark, Earl
year	2004
title	Inter-related Scaled Models of the Built and Natural Environment: Merging CAD with Satellite Image Viewing
source	Architecture in the Network Society [22nd eCAADe Conference Proceedings / ISBN 0-9541183-2-4] Copenhagen (Denmark) 15-18 September 2004, pp. 480-488
doi	https://doi.org/10.52842/conf.ecaade.2004.480
summary	By inter-relating CAD and satellite image earth-viewing tools at building specific, city-wide and larger global scales, a wider framework of observation yields insight into the connectedness between built environments and tracking influences between them. The technologies for visualization and analysis at distinct scales are moving towards greater integration. This project demonstrates integration through three case studies, each at a different scale of application, and considers performance issues and implications for more general use. More specifically, CAD, GIS and now Satellite Image Based Earth Viewing systems all have found separate application within Architecture, Urban Planning and Strategic Regional Analysis This paper reports on an effort to test the tighter coupling of these systems on three projects, each at a different scale: (1) urban and regional scale, (2) continental scale, and (3) hemispheric analysis scale.
keywords	CAD, Earth Viewer, Digital Terrain Model, Comprehensive Plan, Architectural Review Board, Computer Animation
series	eCAADe
email
last changed	2022/06/07 07:59

_id	2004_136
id	2004_136
authors	Mullins, Michael and Zupancic Strojan, Tadeja
year	2004
title	Depth Perception in CAVE and Panorama
source	Architecture in the Network Society [22nd eCAADe Conference Proceedings / ISBN 0-9541183-2-4] Copenhagen (Denmark) 15-18 September 2004, pp. 136-141
doi	https://doi.org/10.52842/conf.ecaade.2004.136
summary	This study compares aspects of spatial perception in a physical environment and its virtual representations in a CAVE and Panorama, derived from recent research. To measure accuracy of spatial perception, participants in an experiment were asked to look at identical objects in the three environments and then locate them and identify their shape on scaled drawings. Results are presented together with statistical analysis. In a discussion of the results, the paper addresses the two hypothetical assertions – that depth perception in physical reality and its virtual representations in CAVE and Panorama are quantifiably different, and that differences are attributable to prior contextual experience of the viewer. The role of prior or tacit knowledge in these environments is established from the empirical data. It is concluded that the CAVE offers a higher potential for spatial experience and learning than the Panorama. The results also suggests that knowledge gained in physical contexts is more readily transferred to its virtual simulation, while that gained in virtual experience is not reliably transferred to its equivalent physical context. The paper discusses implications for spatial ability, learning and training in virtual environments; in architectural education; and participatory design processes, in which the dialogue between real and imagined space may take place in virtual reality techniques.
keywords	Virtual Reality; Perception; Spatial Ability; Learning; Virtual Context
series	eCAADe
email
last changed	2022/06/07 07:59

_id	2004_318
id	2004_318
authors	Ng, Edward
year	2004
title	Optimise Urban Daylight Design Using Computational Simulations
source	Architecture in the Network Society [22nd eCAADe Conference Proceedings / ISBN 0-9541183-2-4] Copenhagen (Denmark) 15-18 September 2004, pp. 318-324
doi	https://doi.org/10.52842/conf.ecaade.2004.318
summary	Urban design is about providing an infrastructure for its inhabitants. An important consideration of design is to provide natural outdoor conditions that are pleasant and conductive to human activities. A well designed outdoor urban environment will also make the design of individual buildings within it easier. There are many design parameters, for example: Development Density, Plot ratio, Site Coverage, Skyline, Building to Space Ratio, Permeability, Building Shapes and so on. This paper reports a study based on „skylines“ as a design parameter, and how it affects daylight and natural ventilation provisions and performance. Experiments are conducted with physical models in artificial sky, as well as using computational lighting simulations. The study establishes that by varying the skylines of the city, the overall daylight performances could be improved when compared to a city with a uniform skyline - given the same density. The message of the paper is that: through better understanding and design, high density cities could be planned and optimised without losing the development efficacy of the land.
keywords	Daylight; Parametric Study; Urban Design; Density
series	eCAADe
email
last changed	2022/06/07 07:58

_id	sigradi2004_349
id	sigradi2004_349
authors	Adriana Simeone; Roberto Segre; José Ripper Kós
year	2004
title	O processo de desenvolvimento da ferramenta cidade interativa [The Developmental Process of an Interactive City Tool]
source	SIGraDi 2004 - [Proceedings of the 8th Iberoamerican Congress of Digital Graphics] Porte Alegre - Brasil 10-12 november 2004
summary	This paper exposes site .Cidade Interativa. development process, based on: a reflection about importance of users. points of view.s incorporation for space remodelling; a study about theoretical and practical experiences which, in different ways, approached potencialities of participation of a community.s members in a project; and, finally, a investigation of propagation alternatives of individual readings as information source for urban project, trying to enhance points of view that generally remain occult in the form of invisible practices of anonymous users. This site must be understood as concretion of an idea: creating a vehicle from which is possible to become individual readings public, so that these are shared and, also, make them available to people responsible for urban projects as information source.
series	SIGRADI
email
last changed	2016/03/10 09:47

_id	ascaad2004_paper17
id	ascaad2004_paper17
authors	Al-Attili, Aghlab A. and Richard D. Coyne
year	2004
title	Embodiment and Illusion: The Implications of Scale as a Cue for Immersion in Virtual Environments
source	eDesign in Architecture: ASCAAD's First International Conference on Computer Aided Architectural Design, 7-9 December 2004, KFUPM, Saudi Arabia
summary	This paper examines the extent to which the issue of scale impinges on our sense of immersion in virtual environments. We consider perception from the point of view of Merleau-Ponty's phenomenology, and describe a study involving extended interviews of a small number of subjects who were presented with static, moving and interactive images of spaces. We test a series of propositions about scale cues, and speculate on the wider phenomenological issues of expectation, metaphor and play.
series	ASCAAD
email
last changed	2007/04/08 19:47

_id	ascaad2004_paper9
id	ascaad2004_paper9
authors	Bennadji, A.; H. Ahriz, and P. Alastair
year	2004
title	Computer Aided Sustainable Design
source	eDesign in Architecture: ASCAAD's First International Conference on Computer Aided Architectural Design, 7-9 December 2004, KFUPM, Saudi Arabia
summary	One of the most important aspects architects need to consider fairly early on is that of energy saving, cost, thermal comfort and the effect on the environment in terms of CO2 emissions. At present, during the early design stage of a building, different options are assessed using simple tools (tables, graphs and software) that contain a large number of assumptions the very nature of which can bias choice or possibly lead to an inappropriate solution. It can be argued that the only way to provide a rational assessment of options is to use calculation methods that represent in detail the physical processes involved; this usually involves the use of dynamic thermal models. Furthermore if this tool is also used during detailed design it would introduce a consistency that is normally absent from the analytical design process. Many designers are of the opinion that, because not all details are known, then such tools are not suitable for application at early stages in the design. This view can be challenged because, even at the concept stage, a great deal is known about a building. This paper aims to show that a general description of a building can be used to generate sufficient data to drive a valid analysis using a detailed thermal model at the early sketch stage of the design process. The paper describes the philosophy, methodology and the interface developed to achieve this aim. The interface guides the user through the input process using a series of screens giving options for keywords used to describe the building; comprehensive default data built into the software are then attached to these keywords. The resulting data file is a building description that is the best possible interpretation of the design intent. This can then be used to assess options and guide towards a final design.
series	ASCAAD
email
last changed	2007/04/08 19:47

_id	cf2011_p157
id	cf2011_p157
authors	Boton, Conrad; Kubicki Sylvain, Halin Gilles
year	2011
title	Understanding Pre-Construction Simulation Activities to Adapt Visualization in 4D CAD Collaborative Tools
source	Computer Aided Architectural Design Futures 2011 [Proceedings of the 14th International Conference on Computer Aided Architectural Design Futures / ISBN 9782874561429] Liege (Belgium) 4-8 July 2011, pp. 477-492.
summary	Increasing productivity and efficiency is an important issue in the AEC field. This area is mainly characterized by fragmentation, heterogeneous teams with low lifetimes and many uncertainties. 4D CAD is one of the greatest innovations in recent years. It consists in linking a 3D model of the building with the works planning in order to simulate the construction evolution over time. 4D CAD can fill several needs from design to project management through constructivity analysis and tasks planning (Tommelein 2003). The literature shows that several applications have been proposed to improve the 4D CAD use (Chau et al. 2004; Lu et al. 2007; Seok & al. 2009). In addition, studies have shown the real impact of 4D CAD use in construction projects (Staub-French & Khanzode 2007; Dawood & Sika 2007). More recently, Mahalingam et al. (2010) showed that the collaborative use of 4D CAD is particularly useful during the pre-construction phase for comparing the constructability of working methods, for visually identifying conflicts and clashes (overlaps), and as visual tool for practitioners to discuss and to plan project progress. So the advantage of the 4D CAD collaborative use is demonstrated. Moreover, several studies have been conducted both in the scientific community and in the industrial world to improve it (Zhou et al. 2009; Kang et al. 2007). But an important need that remains in collaborative 4D CAD use in construction projects is about the adaptation of visualization to the users business needs. Indeed, construction projects have very specific characteristics (fragmentation, variable team, different roles from one project to another). Moreover, in the AEC field several visualization techniques can represent the same concept and actors choose one or another of these techniques according to their specific needs related to the task they have to perform. For example, the tasks planning may be represented by a Gantt chart or by a PERT network and the building elements can be depicted with a 3D model or a 2D plan. The classical view (3D + Gantt) proposed to all practitioners in the available 4D tools seems therefore not suiting the needs of all. So, our research is based on the hypothesis that adapting the visualization to individual business needs could significantly improve the collaboration. This work relies on previous ones and aim to develop a method 1) to choose the best suited views for performed tasks and 2) to compose adapted multiple views for each actor, that we call ‚Äúbusiness views‚Äù. We propose a 4 steps-method to compose business views. The first step identifies the users‚Äô business needs, defining the individual practices performed by each actor, identifying his business tasks and his information needs. The second step identifies the visualization needs related to the identified business needs. For this purpose, the user‚Äôs interactions and visualization tasks are described. This enables choosing the most appropriate visualization techniques for each need (step 3). At this step, it is important to describe the visualization techniques and to be able to compare them. Therefore, we proposed a business view metamodel. The final step (step 4) selects the adapted views, defines the coordination mechanisms and the interaction principles in order to compose coordinated visualizations. A final step consists in a validation work to ensure that the composed views really match to the described business needs. This paper presents the latest version of the method and especially presents our latest works about its first and second steps. These include making more generic the business tasks description in order to be applicable within most of construction projects and enabling to make correspondence with visualization tasks.
keywords	Pre-construction, Simulation, 4D CAD, Collaboration, Computer Supported Cooperative Work, Human-Computer Interface, Information visualization, Business view, Model driven engineering
series	CAAD Futures
email
last changed	2012/02/11 19:21

_id	ddss2004_ra-293
id	ddss2004_ra-293
authors	Chang, T.-W.
year	2004
title	Supporting Design Learning with Design Puzzles
source	Van Leeuwen, J.P. and H.J.P. Timmermans (eds.) Recent Advances in Design & Decision Support Systems in Architecture and Urban Planning, Dordrecht: Kluwer Academic Publishers, ISBN: 1-4020-2408-8, p. 293-307
summary	The design process is a puzzle-solving process. Two groups of researches that share many similarities with Puzzle-solving design process are the process of game-playing and playful learning. The main argument is using the “playing” characteristics to amplify and explore the learning process, furthermore the design process. In addition, puzzles imply playful exploration that utilizes the characteristics of “playing a game” as “solving a puzzle”. Puzzle making and puzzle solving provides an incremental exploration mechanism that is more intuitive for design learning. For understanding and realizing puzzles in design learning, this research is divided into two stages of researches—manual design puzzles and interactive design puzzles. By analysing the outcome from manual design puzzles, this research proposes a framework called (interactive) “design puzzles”. The conceptual and implementation framework of this view of design is elaborated in this paper as well as a particular design puzzle called puzzle collage is described as the realization of design puzzles.
keywords	Design Puzzles, Design Collage, Puzzle-Making, Andragogy, Game Play
series	DDSS
last changed	2004/07/03 22:13

_id	204caadria2004
id	204caadria2004
authors	Chieh-Jen Lin, Mao-Lin Chiu
year	2004
title	Design Knowledge Discovery in Cases - The Machine View Vs. the Human View
source	CAADRIA 2004 [Proceedings of the 9th International Conference on Computer Aided Architectural Design Research in Asia / ISBN 89-7141-648-3] Seoul Korea 28-30 April 2004, pp. 265-274
doi	https://doi.org/10.52842/conf.caadria.2004.265
summary	In the previous study, we had applied the data mining techniques and ontology methodology to develop a keyword-based schema to extract and represent the implicit information within a case library, Case Base for Architecture (CBA). To improve the ability of our keyword-based schema on extracting and representing design knowledge within cases, we proceeded some experiments to understand the design’s mental behaviors in extracting knowledge from cases. Through protocol analysis, we attempted to establish a knowledge discovery model of extracting design knowledge from cases, and to propose methods to apply this model to improve our keyword-based schema. Through collecting adjective keywords to restructure our design dictionary, we attempt to make our system more sensitive to design knowledge, and more sensitive to user’s intensions by extending the ontology of our keyword list.
series	CAADRIA
email
last changed	2022/06/07 07:55

_id	2004_366
id	2004_366
authors	García Alvarado, Rodrigo and Monedero Isorna, Javier
year	2004
title	The Fragmented Eye - Cinematographic Techniques for Architectural Animations
source	Architecture in the Network Society [22nd eCAADe Conference Proceedings / ISBN 0-9541183-2-4] Copenhagen (Denmark) 15-18 September 2004, pp. 366-373
doi	https://doi.org/10.52842/conf.ecaade.2004.366
summary	In order to contribute to the elaboration of more expressive architectural animations, some famous films, documentaries of buildings and award-winning animations were analyzed. This was carried out examining the cinematographic techniques used at three levels of filming language; image setting, shot movements and montage, according to concepts described in theoretical texts. The analysis revealed an extensive use of techniques, in particular in movies, that give graphic diversity and perceptual stability. Based on that, it proposes some ideas for the planning of an architectural animation and a computer implementation of some filmic concepts, in particular related to movements of the point-of-view. This study suggest a fragmented view of building designs, to get an appealing moving presentation, with visual interest and continuity, as such should be also in architecture.
keywords	Animation, Film, Image, Movement, Montage
series	eCAADe
last changed	2022/06/07 07:50

_id	2004
authors	Hendricx, A.
year	2000
title	A Core Object Model for Architectural Design
source	Katholieke Universiteit Leuven
summary	A core object model apt to describe architectural objects and their functionality is one of the keystones to an integrated digital design environment for architecture. The object model presented in this thesis is based on a conceptual framework for computer aided architectural design (CAAD) and aims to assist the architect designer right from the early stages in the design process. For its development the object-oriented analysis method MERODE (Model-based Existence-dependency Relationship Object-oriented Development) is used. After a survey on the role of computers in the architectural design process and on particular Product Modelling initiatives, the model is elaborated in two phases: the enterprise-modelling phase and the higher functionality-modelling phase. Actual design cases and test implementations help to establish the conceptual model and illustrate its concepts. The appendices provide a detailed description of both the object model and one of the case studies. The architect’s point of view and the specific nature of the architectural design process are the basic considerations, thus leading to a unique model that hopes to make a valuable contribution to the research area of integrated design environments.
series	thesis:PhD
email
last changed	2003/02/12 22:37

_id	acadia04_100
id	acadia04_100
authors	Liapi, Katherine
year	2004
title	A computer Based System for the Design and Fabrication of Tensegrity Structures
source	Fabrication: Examining the Digital Practice of Architecture [Proceedings of the 23rd Annual Conference of the Association for Computer Aided Design in Architecture and the 2004 Conference of the AIA Technology in Architectural Practice Knowledge Community / ISBN 0-9696665-2-7] Cambridge (Ontario) 8-14 November, 2004, 100-109
doi	https://doi.org/10.52842/conf.acadia.2004.100
summary	Tensegrity structures are composed of tension compression components, where the compression components (bars) are discontinuously enclosed within continuous tensile components (cables). From an engineering point of view, a tensegrity structure is characterized by geometric non-linearity and large displacements under loading. Therefore, its prestressed shape and deformation under loading are the result of the combined effect of the geometric parameters that determine the initial configuration of the structure, the level of prestress applied to cables, and the material properties of the component members of the structure. A method for generating the initial geometric configuration of tensegrity structures composed of tensegrity units and a parametric expression of this geometry have already been developed. A novel technology that makes possible the construction of tensegrity structures from the on-site assembly of deployable tensegrity units, which are furnished with a simple mechanism that permits bar-elongation, and, as a result, an increase of the prestress applied to the cables of each unit, is also under development. Also under development is a static analysis method that takes into account the above method for prestressing cables. This paper discusses the features of a system that supports the combined geometric and structural design of tensegrity structures, and integrates a graphical interface to display: a) models of initial geometry, b) geometry of the structure after prestress and loading are applied, and c) magnitude of forces applied to the structure’s component members (bars and cables). The system also provides numerical data to be used in component fabrication, and is therefore expected to become a very valuable tool for the design and construction of tensegrity structures.
series	ACADIA
last changed	2022/06/07 07:59

_id	sigradi2005_075
id	sigradi2005_075
authors	Müller, Milagros
year	2005
title	Perception of representation space for present forms of art
source	SIGraDi 2005 - [Proceedings of the 9th Iberoamerican Congress of Digital Graphics] Lima - Peru 21-24 november 2005, vol. 1, pp. 75-79
summary	Contemporaneus art constructs its own space: interactive, multiple, eidetic, heterogenous, discontinuous and subjective: essence, forms and idea of a heterotopic at the same time atopic space, that arises at the moment of the intelligible apprehension of the work. This work sets out to study the construction codes of that space from the spectator point of view, for whom the history is the sum of histories narrated by the space, the scenery, stage scene, choreography, dances, hairdos, accessories, make-up, clothes, illumination, music, sounds, songs, word, performance, gestures etc., for which sets out the analysis from the perceived, analyzed and interpreted images by the spectator. It will be exemplified from the Dogville film, of Lars Von Traer (2004), using the qualitative research method, where the speaker meaning is introduced: the creator intentionality of those spaces, but is inescapable who arises the “interpretation” from the observer. [Full paper in Spanish]
series	SIGRADI
email
last changed	2016/03/10 09:55

For more results click below: