Cumincad : CUMINCAD Papers : Search Results

CumInCAD is a Cumulative Index about publications in Computer Aided Architectural Design
supported by the sibling associations ACADIA, CAADRIA, eCAADe, SIGraDi, ASCAAD and CAAD futures

PDF papers
References

Hits 1 to 20 of 567

Reformat results as: short short into frame detailed detailed into frame

_id	404caadria2004
id	404caadria2004
authors	Naai-Jung Shih, Pin-Hung Wang
year	2004
title	Study on Construction Inaccuracies Between Pointcloud and Building Construction Models
doi	https://doi.org/10.52842/conf.caadria.2004.623
source	CAADRIA 2004 [Proceedings of the 9th International Conference on Computer Aided Architectural Design Research in Asia / ISBN 89-7141-648-3] Seoul Korea 28-30 April 2004, pp. 623-632
summary	This research uses a 3D scanner to scan the construction process at a building construction site in order to produce point-cloud information to compare with the 3D-computer model from a shop drawing. In the check process, we can find construction inaccuracy, and measure the value of the inaccuracy. This will help us determine the precision of the construction methods.
series	CAADRIA
email
last changed	2022/06/07 07:59

_id	disschoo
id	disschoo
authors	Choo, Seung Yeon
year	2004
title	STUDY ON COMPUTER-AIDED DESIGN SUPPORT OF TRADITIONAL ARCHITECTURAL THEORIES
source	Technische Universität München
summary	The research presented in this thesis describes a computer-aided design support of traditional architectural theories. Traditional architectural theories in western architecture have been considered as a basis for answering the fundamental questions of architecture: proportion, symmetry, colour, harmony and so on. In particular, the aesthetic aspect of these theories has been one of many important architectural aspects, and which is concerned with the field of architecture in determining the beauty of architectural form. The most significant role of the traditional theories in architecture is to maintain unity, to avoid chaos and then to achieve harmony in a design, using some specific design principles. However, current technology-guided constructions tend to neglect often the importance of these theories due to the standardization of building elements, due to mechanically-prepared construction and the reducing completion costs, etc. Thus, this research proposes a design support system as a design assistant that gives an intelligent advice on architectural design, using analytical design- and ordering- principles of traditional theories for the optimization of the architectural design from the aesthetic perspective. To evaluate the aesthetic quality of an architectural design, this system is implemented in the AutoCAD environment, using the AutoLISP. It is applied so as to explain and develop aesthetic qualities of a design. Designs proposed by this system include optimum designs, which are based on the traditional architectural theories, and new ones which can be in future connected to information models. To do this, the definition of information about building elements is accomplished by using the neutral format EXPRESS and EXPRESS-G for such application systems. The results of the application system are presented, such as the easily generating and quickly conceptualising of an object model, the checking of the aesthetic value of the design during the various design phases, the helping to find direction during rational searching for a solution. The user can easily appreciate the usefulness of the proposed system as a set of tools for searching for rational architectural aesthetics and formal solutions at different design-stages. It is to be hoped that a new "traditional" fundamental of architecture, such as the proposed system, incorporating CAAD systems, will find its place among new technological methods in the AEC industry and so help to bridge the gap between the value of traditional architecture and CAAD systems.
keywords	Aesthetics, Design Theory, Order Principle, Product Model, IFC, AutoCAD/AutoLISP
series	thesis:PhD
type	normal paper
email
more	http://tumb1.biblio.tu-muenchen.de/publ/diss/ar/2004/choo.html
last changed	2004/05/23 07:05

_id	sigradi2006_e131c
id	sigradi2006_e131c
authors	Ataman, Osman
year	2006
title	Toward New Wall Systems: Lighter, Stronger, Versatile
source	SIGraDi 2006 - [Proceedings of the 10th Iberoamerican Congress of Digital Graphics] Santiago de Chile - Chile 21-23 November 2006, pp. 248-253
summary	Recent developments in digital technologies and smart materials have created new opportunities and are suggesting significant changes in the way we design and build architecture. Traditionally, however, there has always been a gap between the new technologies and their applications into other areas. Even though, most technological innovations hold the promise to transform the building industry and the architecture within, and although, there have been some limited attempts in this area recently; to date architecture has failed to utilize the vast amount of accumulated technological knowledge and innovations to significantly transform the industry. Consequently, the applications of new technologies to architecture remain remote and inadequate. One of the main reasons of this problem is economical. Architecture is still seen and operated as a sub-service to the Construction industry and it does not seem to be feasible to apply recent innovations in Building Technology area. Another reason lies at the heart of architectural education. Architectural education does not follow technological innovations (Watson 1997), and that “design and technology issues are trivialized by their segregation from one another” (Fernandez 2004). The final reason is practicality and this one is partially related to the previous reasons. The history of architecture is full of visions for revolutionizing building technology, ideas that failed to achieve commercial practicality. Although, there have been some adaptations in this area recently, the improvements in architecture reflect only incremental progress, not the significant discoveries needed to transform the industry. However, architectural innovations and movements have often been generated by the advances of building materials, such as the impact of steel in the last and reinforced concrete in this century. There have been some scattered attempts of the creation of new materials and systems but currently they are mainly used for limited remote applications and mostly for aesthetic purposes. We believe a new architectural material class is needed which will merge digital and material technologies, embedded in architectural spaces and play a significant role in the way we use and experience architecture. As a principle element of architecture, technology has allowed for the wall to become an increasingly dynamic component of the built environment. The traditional connotations and objectives related to the wall are being redefined: static becomes fluid, opaque becomes transparent, barrier becomes filter and boundary becomes borderless. Combining smart materials, intelligent systems, engineering, and art can create a component that does not just support and define but significantly enhances the architectural space. This paper presents an ongoing research project about the development of new class of architectural wall system by incorporating distributed sensors and macroelectronics directly into the building environment. This type of composite, which is a representative example of an even broader class of smart architectural material, has the potential to change the design and function of an architectural structure or living environment. As of today, this kind of composite does not exist. Once completed, this will be the first technology on its own. We believe this study will lay the fundamental groundwork for a new paradigm in surface engineering that may be of considerable significance in architecture, building and construction industry, and materials science.
keywords	Digital; Material; Wall; Electronics
series	SIGRADI
email
last changed	2016/03/10 09:47

_id	0131
id	0131
authors	Chiarella, Mauro
year	2004
title	GEOMETRY AND ARCHITECTURE: NURBS, DESIGN AND CONSTRUCTION
source	Proceedings of the Fourth International Conference of Mathematics & Design, Special Edition of the Journal of Mathematics & Design, Volume 4, No.1, pp. 135-139.
summary	Geometry regarded as a tool for understanding is perhaps the part of Mathematics which is the most intuitive, concrete and linked to reality. From its roots as a tool to describe and measure shapes, geometry as ‘the space science’ , has grown towards a theory of ideas and methods by means of which it is possible to build and study idealised models, not only from the physical world but also from the real world. In graphic architecture thought, geometry usually appears as an instrumental support for project speculation. Geometric procedures are presented as representational resources for the graphic testing of reflection and for the exposition of ideas in order to build a logical order as regards representation and formal prefiguration. The fast rise of computing in the last decades has made it possible for architects to work massively and in a graphic and intuitive way with mathematical representations of tridimensional geometry, such as the NURBS . These organic surfaces of free shapes defined by vectorial curves have allowed access to a rapid generation of complex shapes with a minumum amount of data and of specific knowledge. The great development of modelling achieved by the digital media and the limitations in the technical and building areas and in the existence of materials which are coherent with the resultant shapes reveal a considerable distance between the systems of ideation and simulation characteristic of the computing era and the analogous systems of production inherited from the slow industrial development. This distance has been shortened by CAD/CAM systems, which are, however, not very accessible to the architectural field. If we incorporate to the development of these divergent media the limitations which are distinctive of the material resources and procedures of the existent local technology, the aforementioned distance seems even greater. Assuming the metaphor of living at the threshold of two ages (industrial-computing, analogical-digital, material-virtual) and the challenge of the new conceptual and operational tools in our field, we work in the mixture, with no exclusions or substitutions, proposing (by means of the development of informational complements) some alternatives of work to approach the issue under discussion from the Architecture Workshop.
keywords	Geometry, Design, NURBS, Unfolding, Pedagogy
series	other
type	normal paper
email
last changed	2005/04/07 12:51

_id	ijac20032203
id	ijac20032203
authors	Elvin, George
year	2004
title	Integrating Design and Construction with Wearable Computers
source	International Journal of Architectural Computing vol. 2 - no. 2
summary	Wearable computers can help bridge the gap betweendesign and construction. They can integrate thesetraditionally separate cultures by improving the flowof information between them. Using a wearablecomputer, design and construction personnel can nowexchange design information quickly and continuouslybetween the point of work on the construction siteand the remote design office. The improved iterationbetween design and construction and much strongerconnection between design personnel andconstruction site afforded by wearable computers maypoint the way to a new kind of integratedarchitectural process. In this study, the goal was todetermine the value of wearable computers inintegrating design and construction by measuringspecific performance characteristics.The resultsinclude findings on productivity, rework andcommunication quality. They reveal that wearablecomputers can improve communication quality andreduce rework, but may have an initially negativeimpact on productivity. These findings suggest thatwearable computers may play a key role in futurebuilding projects, helping to bridge the current dividebetween design and construction.
series	journal
more	http://www.multi-science.co.uk/ijac.htm
last changed	2007/03/04 07:08

_id	9968
id	9968
authors	Tinnirello, A.; Voget, R.; De Federico, S.
year	2004
title	MATHEMATICS FORMATION AND CREATIVE DESIGN
source	Proceedings of the Fourth International Conference of Mathematics & Design, Special Edition of the Journal of Mathematics & Design, Volume 4, No.1, pp. 225-229.
summary	One of the earliest human beings desires has been to inhabit a place that may assemble beauty and functionality. Architecture and Design have been the disciplines in charge to formalize it. Their study, as well as the way they are taught have been adapted to fit the needs; and the velocity of their transformation is even greater as well as the link between design, art and technology. Creativity, in it basic generic entity, is the capability to solve appropriately and originally phrased architectural problems which involves not only space, act, environment and semiotics but with everything related to make the project able to be constructed and inhabitable. New technologies are based on complex algorithms which, by the use of simulators, achieve to produce complexity works that would have been unbelievable twenty year ago. These algorithms have a strong mathematical basis and allow to generate other working methods so as to create wonderful geometrical objects. The study of this New Geometry requires to explore and expand this field of knowledge in the Architecture studies. In order to analyze and use complex design systems to generate non linear experimental models, it is necessary the Mathematical contribution, not only at the University education stage but also at the professional life. This New Mathematics adequately focused, is able and must be an essential ally to creative design which is born with an exercised imagination in the formation stage; therefore it must aid to establish a space where knowledge and ability for architectural work can be created, synthesized and experimented. This work tries to encourage students and in relation to Geometry promotes the following aspects: (i) Inspection of new architectural spaces, (ii)Comprehension of the geometrical structure, (iii) Originality and common sense, (iv) Relation between Geometry and design of construction constitutive elements,(v) Insertion of man in the space, (vi) Conditioning of design to human body dimensions, (vii) Fractal geometries. According to what has been expressed, this proposition acquires a fundamental significance to develop a spatial vision of geometrical shapes in students, in order to stimulate the understanding of the existing relation between abstract geometrical elements and their real applications in Architecture, Geometry and Design and Art. Besides, the purpose of this work has the aim to approach knowledge at the architectural design process and to the study of shapes and mathematical models that such designs sustain , and ultimately demonstrate the importance of an academic organization that involve teachers from different disciplines.
series	other
type	normal paper
email
last changed	2005/04/07 15:37

_id	acadia11_138
id	acadia11_138
authors	Buell, Samantha; Shaban, Ryan; Corte, Daniel; Beorkrem, Christopher
year	2011
title	Zero-waste, Flat Pack Truss Work: An Investigation of Responsive Structuralism
doi	https://doi.org/10.52842/conf.acadia.2011.138
source	ACADIA 11: Integration through Computation [Proceedings of the 31st Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA)] [ISBN 978-1-6136-4595-6] Banff (Alberta) 13-16 October, 2011, pp. 138-143
summary	The direct and rapid connections between scripting, modeling and prototyping allow for investigations of computation in fabrication. The manipulation of planar materials with two-dimensional CNC cuts can easily create complex and varied forms, volumes, and surfaces. However, the bulk of research on folding using CNC fabrication tools is focused upon surfaces, self-supporting walls and shell structures, which do not integrate well into more conventional building construction models.This paper attempts to explain the potential for using folding methodologies to develop structural members through a design-build process. Conventional building practice consists of the assembly of off-the-shelf parts. Many times, the plinth, skeleton, and skin are independently designed and fabricated, integrating multiple industries. Using this method of construction as an operative status quo, this investigation focused on a single structural component: the truss. A truss is defined as: “A triangulated arrangement of structural members that reduces nonaxial external forces to a set of axial forces in its members.” (Allen and Iano 2004)Using folding methodologies and sheet steel to create a truss, this design investigation employed a recyclable and prolific building material to redefine the fabrication of a conventional structural member. The potential for using digital design and two-dimensional CNC fabrication tools in the design of a foldable truss from sheet steel is viable in the creation of a flat-packed, minimal waste structural member that can adapt to a variety of aesthetic and structural conditions. Applying new methods to a component of the conventional ‘kit of parts’ allowed for a novel investigation that recombines zero waste goals, flat-packing potential, structural expression and computational processes.
series	ACADIA
type	normal paper
email
last changed	2022/06/07 07:54

_id	sigradi2004_050
id	sigradi2004_050
authors	Filiz Ozel
year	2004
title	Standardization of building information management
source	SIGraDi 2004 - [Proceedings of the 8th Iberoamerican Congress of Digital Graphics] Porte Alegre - Brasil 10-12 november 2004
summary	This article summarizes the history of the standardization efforts in the architectural, engineering and construction industry and focuses on the three phases of the life cycle of a building, namely design, construction and use phases. Data and information needs of each phase tends to be quite different than one another, thus leading to difficulty in seamless exchange and integration between different constituents of the AEC industry. Downstream data users expect the architect to generate digital design information that is usable in the construction and use phases of a building.s life cycle. Recently American Institute of Architects have assembled a congress in Washington DC, bringing together representatives from the AEC/FM industry, government agencies, software industry and academic institutions. This paper is a summary of the presentation this author gave at this congress in April, 2004.
keywords	CAD standards, data models, information models, standards development
series	SIGRADI
last changed	2016/03/10 09:51

_id	2004_396
id	2004_396
authors	Fischer, Thomas
year	2004
title	Microcontroller - Enhanced Physical Models for Architectural and Product Design
doi	https://doi.org/10.52842/conf.ecaade.2004.396
source	Architecture in the Network Society [22nd eCAADe Conference Proceedings / ISBN 0-9541183-2-4] Copenhagen (Denmark) 15-18 September 2004, pp. 396-403
summary	Electronic sensors, controllers, displays and actuators can significantly enhance the value of physical models as processes of use, interaction and transformation take center stage in various fields of design. These technologies allow the development of novel computer interfaces for new kinds of interaction with virtual models, and in the future they will allow new types of active building components and materials for automated construction and dynamic runtime adaptations of inhabitable environments. However, embedding programmed logic into physical objects seems to confront designers and model makers with a steep learning curve outside the domains of their traditional expertise. The variety of alternative technologies and development tools in this area has a particularly disorienting effect on novices. Some early experiences however suggest that mastery of this learning curve is easily within reach, given some basic introduction, guidance and support. It is the purpose of this paper to provide designers with a starting point for explorations into this area, to give orientation and to demonstrate some possible development approaches and results.
keywords	Interaction, Process, High-Fidelity Models, Microcontrollers, Electronics
series	eCAADe
last changed	2022/06/07 07:51

_id	ijac20032204
id	ijac20032204
authors	Harfmann, Anton C.; Bauser, Paul J.
year	2004
title	Component-Based Design: A Summary and Scheme for Implementation
source	International Journal of Architectural Computing vol. 2 - no. 2
summary	This paper summarizes the major advantages ofcomponent-based design as a paradigm for handling alldesign and construction information about a buildingat every stage of design. The paper reviews some ofthe current issues that plague the building design andconstruction industry. The component-based paradigmis reviewed as a model that reunites the fragmentedbuilding industry and as a solution for dealing withvast amounts of information that accretes during thedesign-construction process. Based on interviews witharchitects, engineers, contractors and fabricators aswell as on-site documentation of construction wefeature the design and construction of the main stairin the Rosenthal Center for Contemporary Artdesigned by Zaha Hadid as a specific case study toillustrate the viability of component-based design andto highlight the obstacles challenging itsimplementation.
series	journal
more	http://www.multi-science.co.uk/ijac.htm
last changed	2007/03/04 07:08

_id	ascaad2004_paper15
id	ascaad2004_paper15
authors	Mallasi, Z.
year	2004
title	Identification and Visualisation of Construction Activities’ Workspace Conflicts Utilising 4D CAD/VR Tools
source	eDesign in Architecture: ASCAAD's First International Conference on Computer Aided Architectural Design, 7-9 December 2004, KFUPM, Saudi Arabia
summary	This work addresses the problem arising on all construction sites: the occurrence of workspace interference between construction activities. From a site space planning context, this problem can lead to an inevitable roadblock to the progress of the scheduled construction operations. In real situations, when the spatial congestions occur, they could reduce productivity of workers sharing the same workspace and may cause health and safety hazard issues. The aim of this paper is on presenting a computer-based method and developed tool to assist site managers in the assignment and identification of workspace conflicts. The author focuses on the concept of ‘visualising space competition’ between the construction activities. The concept is based on a unique representation of the dynamic behaviour of activity workspace in 3D space and time. An innovative computer-based tool dubbed PECASO (Patterns Execution and Critical Analysis of Site-space Organisation) has been developed. The emerging technique of 4D (3D + time) visualisation has been chosen to yield an interesting 4D space planning and visualisation tool. A multi-criteria function for measuring the severity of the workspace congestions is designed, embedding the spatial and schedule related criteria. The paper evaluates the PECASO approach in order to minimise the workspace congestions, using a real case study. The paper concludes that the PECASO approach reduces the number of competing workspaces and the conflicting volumes between occupied workspace, which in turn produces better assessment to the execution strategy for a given project schedule. The system proves to be a promising tool for 4D space planning; in that it introduces a new way of communicating the programme of work.
series	ASCAAD
email
last changed	2007/04/08 19:47

_id	cedf
id	cedf
authors	Min Ming Cheng
year	2004
title	TOWARDS AN INTEGRATIVE PARADIGM OF DIGITALLY PROCURED ARCHITECTURE: A CASE STUDY OF SINGAPORE’S CONSTRUCTION 21 INITIATIVE AND ITS EFFECTS ON ARCHITECTURAL PRACTICES
source	Faculty of Architecture, Building and Planning The University of Melbourne Australia
summary	The thesis investigates Singapore’s C21 policy as an example of an integrated paradigm for digitally procuring buildings, together with various implications of this policy, and their impacts on the architectural practices that currently operate under this policy in Singapore.
series	thesis:MSc
type	normal paper
email
last changed	2005/03/21 23:14

_id	2004_630
id	2004_630
authors	Naai-Jung Shih, Chen-Yan Lin, and Chai-Yuan Liau
year	2004
title	A 3D Information System for the Digital Preservation of Historical Architecture
doi	https://doi.org/10.52842/conf.ecaade.2004.630
source	Architecture in the Network Society [22nd eCAADe Conference Proceedings / ISBN 0-9541183-2-4] Copenhagen (Denmark) 15-18 September 2004, pp. 630-637
summary	The purpose of this study is to build 3D models for the digital preservation of Chinese architecture. A historical architecture, the main hall of the Pao-An Temple, was scanned with a long-range 3D laser scanner. This temple is 19.68 meters wide, 18.2 meters wide, and 15.7 meters high. In total, the exterior and interior were registered into 1958 scans in order to cover the main hall. Scanned point clouds were converted into 3D computer models, sections, and boundary projections. Digital models were used as references for chronological records and comparison. Scanned components included the roof ridge, wood structure, dragon column, and a hanging flower. This research, which was sponsored by the National Science Council, created a two-way construction process, integrated geometric and image data, and established a digital reservation work process. Web pages were made to display 3D color components by using a plug-in to enable browsing of large files.
keywords	3D Laser Scanner; Historical Preservation
series	eCAADe
email
last changed	2022/06/07 07:59

_id	105caadria2004
id	105caadria2004
authors	Sheng-Cheng Shih
year	2004
title	Interoperable Co-Design System
doi	https://doi.org/10.52842/conf.caadria.2004.079
source	CAADRIA 2004 [Proceedings of the 9th International Conference on Computer Aided Architectural Design Research in Asia / ISBN 89-7141-648-3] Seoul Korea 28-30 April 2004, pp. 79-90
summary	Project Alliances is a new alternative to A/E/C traditional project delivery systems, especially in the commercial building sector. The interoperable model of Co-design process and systems characteristics that is required to reduce the adversarial nature of most construction projects. Interoperable Co-Design System was just used successfully to complete the Si-soft Research Center of Taiwan. This project-alliancing project was analyzed as a case study to evaluate the validity of the system. Three key paradigms of the Co-Design were reviewed and numerous examples from the management of this project were cited that support the theoretical recommendations of this model. It was concluded that the system use wild client/server network architecture embedded with peer-to-peer agent technology to provide an open, familiar and easily extended co-design system.
series	CAADRIA
email
last changed	2022/06/07 07:56

_id	sigradi2006_e028c
id	sigradi2006_e028c
authors	Griffith, Kenfield; Sass, Larry and Michaud, Dennis
year	2006
title	A strategy for complex-curved building design:Design structure with Bi-lateral contouring as integrally connected ribs
source	SIGraDi 2006 - [Proceedings of the 10th Iberoamerican Congress of Digital Graphics] Santiago de Chile - Chile 21-23 November 2006, pp. 465-469
summary	Shapes in designs created by architects such as Gehry Partners (Shelden, 2002), Foster and Partners, and Kohn Peterson and Fox rely on computational processes for rationalizing complex geometry for building construction. Rationalization is the reduction of a complete geometric shape into discrete components. Unfortunately, for many architects the rationalization is limited reducing solid models to surfaces or data on spread sheets for contractors to follow. Rationalized models produced by the firms listed above do not offer strategies for construction or digital fabrication. For the physical production of CAD description an alternative to the rationalized description is needed. This paper examines the coupling of digital rationalization and digital fabrication with physical mockups (Rich, 1989). Our aim is to explore complex relationships found in early and mid stage design phases when digital fabrication is used to produce design outcomes. Results of our investigation will aid architects and engineers in addressing the complications found in the translation of design models embedded with precision to constructible geometries. We present an algorithmically based approach to design rationalization that supports physical production as well as surface production of desktop models. Our approach is an alternative to conventional rapid prototyping that builds objects by assembly of laterally sliced contours from a solid model. We explored an improved product description for rapid manufacture as bilateral contouring for structure and panelling for strength (Kolarevic, 2003). Infrastructure typically found within aerospace, automotive, and shipbuilding industries, bilateral contouring is an organized matrix of horizontal and vertical interlocking ribs evenly distributed along a surface. These structures are monocoque and semi-monocoque assemblies composed of structural ribs and skinning attached by rivets and adhesives. Alternative, bi-lateral contouring discussed is an interlocking matrix of plywood strips having integral joinery for assembly. Unlike traditional methods of building representations through malleable materials for creating tangible objects (Friedman, 2002), this approach constructs with the implication for building life-size solutions. Three algorithms are presented as examples of rationalized design production with physical results. The first algorithm [Figure 1] deconstructs an initial 2D curved form into ribbed slices to be assembled through integral connections constructed as part of the rib solution. The second algorithm [Figure 2] deconstructs curved forms of greater complexity. The algorithm walks along the surface extracting surface information along horizontal and vertical axes saving surface information resulting in a ribbed structure of slight double curvature. The final algorithm [Figure 3] is expressed as plug-in software for Rhino that deconstructs a design to components for assembly as rib structures. The plug-in also translates geometries to a flatten position for 2D fabrication. The software demonstrates the full scope of the research exploration. Studies published by Dodgson argued that innovation technology (IvT) (Dodgson, Gann, Salter, 2004) helped in solving projects like the Guggenheim in Bilbao, the leaning Tower of Pisa in Italy, and the Millennium Bridge in London. Similarly, the method discussed in this paper will aid in solving physical production problems with complex building forms. References Bentley, P.J. (Ed.). Evolutionary Design by Computers. Morgan Kaufman Publishers Inc. San Francisco, CA, 1-73 Celani, G, (2004) “From simple to complex: using AutoCAD to build generative design systems” in: L. Caldas and J. Duarte (org.) Implementations issues in generative design systems. First Intl. Conference on Design Computing and Cognition, July 2004 Dodgson M, Gann D.M., Salter A, (2004), “Impact of Innovation Technology on Engineering Problem Solving: Lessons from High Profile Public Projects,” Industrial Dynamics, Innovation and Development, 2004 Dristas, (2004) “Design Operators.” Thesis. Massachusetts Institute of Technology, Cambridge, MA, 2004 Friedman, M, (2002), Gehry Talks: Architecture + Practice, Universe Publishing, New York, NY, 2002 Kolarevic, B, (2003), Architecture in the Digital Age: Design and Manufacturing, Spon Press, London, UK, 2003 Opas J, Bochnick H, Tuomi J, (1994), “Manufacturability Analysis as a Part of CAD/CAM Integration”, Intelligent Systems in Design and Manufacturing, 261-292 Rudolph S, Alber R, (2002), “An Evolutionary Approach to the Inverse Problem in Rule-Based Design Representations”, Artificial Intelligence in Design ’02, 329-350 Rich M, (1989), Digital Mockup, American Institute of Aeronautics and Astronautics, Reston, VA, 1989 Schön, D., The Reflective Practitioner: How Professional Think in Action. Basic Books. 1983 Shelden, D, (2003), “Digital Surface Representation and the Constructability of Gehry’s Architecture.” Diss. Massachusetts Institute of Technology, Cambridge, MA, 2003 Smithers T, Conkie A, Doheny J, Logan B, Millington K, (1989), “Design as Intelligent Behaviour: An AI in Design Thesis Programme”, Artificial Intelligence in Design, 293-334 Smithers T, (2002), “Synthesis in Designing”, Artificial Intelligence in Design ’02, 3-24 Stiny, G, (1977), “Ice-ray: a note on the generation of Chinese lattice designs” Environmental and Planning B, volume 4, pp. 89-98
keywords	Digital fabrication; bilateral contouring; integral connection; complex-curve
series	SIGRADI
email
last changed	2016/03/10 09:52

_id	acadia04_100
id	acadia04_100
authors	Liapi, Katherine
year	2004
title	A computer Based System for the Design and Fabrication of Tensegrity Structures
doi	https://doi.org/10.52842/conf.acadia.2004.100
source	Fabrication: Examining the Digital Practice of Architecture [Proceedings of the 23rd Annual Conference of the Association for Computer Aided Design in Architecture and the 2004 Conference of the AIA Technology in Architectural Practice Knowledge Community / ISBN 0-9696665-2-7] Cambridge (Ontario) 8-14 November, 2004, 100-109
summary	Tensegrity structures are composed of tension compression components, where the compression components (bars) are discontinuously enclosed within continuous tensile components (cables). From an engineering point of view, a tensegrity structure is characterized by geometric non-linearity and large displacements under loading. Therefore, its prestressed shape and deformation under loading are the result of the combined effect of the geometric parameters that determine the initial configuration of the structure, the level of prestress applied to cables, and the material properties of the component members of the structure. A method for generating the initial geometric configuration of tensegrity structures composed of tensegrity units and a parametric expression of this geometry have already been developed. A novel technology that makes possible the construction of tensegrity structures from the on-site assembly of deployable tensegrity units, which are furnished with a simple mechanism that permits bar-elongation, and, as a result, an increase of the prestress applied to the cables of each unit, is also under development. Also under development is a static analysis method that takes into account the above method for prestressing cables. This paper discusses the features of a system that supports the combined geometric and structural design of tensegrity structures, and integrates a graphical interface to display: a) models of initial geometry, b) geometry of the structure after prestress and loading are applied, and c) magnitude of forces applied to the structure’s component members (bars and cables). The system also provides numerical data to be used in component fabrication, and is therefore expected to become a very valuable tool for the design and construction of tensegrity structures.
series	ACADIA
last changed	2022/06/07 07:59

_id	ijac20032208
id	ijac20032208
authors	Talbott, Kyle W.
year	2004
title	Divergent Thinking in the Construction of Architectural Models
source	International Journal of Architectural Computing vol. 2 - no. 2
summary	The article examines one little understood butubiquitous form of divergent thinking achievedintermittently during the act of drawing or modeling.It is argued that this phenomenon, here calledintermittent divergence, is rooted in a special kind ofinteraction between perception and imagination, andthat this interaction has specific experientialrequirements. Three requirements are defined. Theresulting new theory then provides a framework forthe critical analysis of conventional digital modelingand parametric modeling. Conventional modelingmethods are shown to satisfy the requirements forintermittent divergence, while parametric modelingmethods are shown to undermine them. The articleconcludes that parametric systems, as currentlydeveloped, could inhibit rather than augment thisimportant route to creativity. Additionally, the articlequestions prevailing beliefs about the computersupport of creativity, including the premise thatsketching is an ideal creative medium and the premisethat ambiguity in graphical depictions is key to thesupport of creativity. The theory offers an alternativeview on these issues.
series	journal
email
more	http://www.multi-science.co.uk/ijac.htm
last changed	2007/03/04 07:08

_id	2004_573
id	2004_573
authors	Shih, Naai-Jung and Wang, Pin-Hung
year	2004
title	Using Point Cloud to Inspect the Construction Quality of Wall Finish
doi	https://doi.org/10.52842/conf.ecaade.2004.573
source	Architecture in the Network Society [22nd eCAADe Conference Proceedings / ISBN 0-9541183-2-4] Copenhagen (Denmark) 15-18 September 2004, pp. 573-578
summary	This research used a 3D scanner to scan mortar finish of a wall during building construction, via recorded 3D point cloud information to inspect the wall’s smoothness. The scanner was considered as an objective science instrument to inspect the quality of the finish job in order to assure better construction quality.
keywords	3D Scanner, Point Cloud, Wall Finish
series	eCAADe
email
last changed	2022/06/07 07:59

_id	acadia04_088
id	acadia04_088
authors	Bechthold, Martin
year	2004
title	Digital Design and Fabrication of Surface Structures
doi	https://doi.org/10.52842/conf.acadia.2004.088
source	Fabrication: Examining the Digital Practice of Architecture [Proceedings of the 23rd Annual Conference of the Association for Computer Aidd Design in Architecture and the 2004 Conference of the AIA Technology in Architectural Practice Knowledge Community / ISBN 0-9696665-2-7] Cambridge (Ontario) 8-14 November, 2004, 88-99
summary	This paper presents a study in digital design and manufacturing of shells, which are material-efficient systems that generate their load-bearing capacity through curvature. Their complex shapes are challenging to build, and the few current shell projects employ the same shape repetitively in order to reduce the cost of concrete formwork. Can digital design and manufacturing technology make these systems suitable for the needs of the 21st century? The research developed new digitally-driven fabrication processes for Wood-Foam Sandwich Shells and Ferrocement-Concrete Sandwich Shells. These are partially pre-fabricated in order to allow for the application of Computer-Numerically Controlled (CNC) technology. Sandwich systems offer advantages for the digitally-enabled construction of shells, while at the same time improving their structural and thermal performance. The research defines design and manufacturing processes that reduce the need for repetition in order to save costs. Wood-Foam Sandwich shells are made by laminating wood-strips over a CNC-milled foam mold that eventually becomes the structural sandwich core. For Ferrocement-Concrete sandwich shells, a two-stage process is presented: pre-fabricated ferrocement panels become the permanent formwork for a cast-in-place concrete shell. The design and engineering process is facilitated through the use of parametric solid modeling environments. Modeling macros and integrated Finite-Element Analysis tools streamline the design process. Accuracy in fabrication is maintained by using CNC techniques for the majority of the shaping processes. The digital design and manufacturing parameters for each process are verified through design and fabrication studies that include prototypes, mockups and physical scale models.
keywords	Shell, Pre-Fabrication, Prototype, Custom-Manufacturing, Simulation
series	ACADIA
email
last changed	2022/06/07 07:54

_id	506b
id	506b
authors	Christenson, Mike
year	2009
title	Testing the relevance of parameterization to architectural epistemology
source	Architectural Science Review, Volume 52.2: 135-141
summary	Advances in building information modeling (BIM) deeply impact the production of new architecture; its benefits are obvious and its acceptance widespread. But how does BIM impact the study of existing architecture? Can BIM be assumed to operate as a neutral framework, equally applicable to the study of architecture anywhere? Using as a point of departure a recent outline of the conceptual structure of parametric modeling prepared by Sacks, Eastman, and Lee (2004), this paper compares parametric models of two existing works of architecture: Mies van der Rohe’s Crown Hall and Peter Zumthor’s St. Benedict Chapel. The processes of parametrically modeling each building are specifically compared in two ways: first, parameters are established for each model; second, each model is "flexed" as a means of disclosing possible semantic relationships within each work of architecture. Because each building demands a different parameter-establishment strategy, and because the models permit different degrees of flexibility, the comparison illustrates the shortcomings of a "neutral framework" assumption to an architectural epistemology.
keywords	Existing architecture, Parametric modeling, Representation
series	journal paper
type	normal paper
email
more	http://www.earthscanjournals.com/asre/052/asre0520135.htm
last changed	2009/06/18 14:24

For more results click below: