CumInCAD is a Cumulative Index about publications in Computer Aided Architectural Design
supported by the sibling associations ACADIA, CAADRIA, eCAADe, SIGraDi, ASCAAD and CAAD futures

PDF papers
References

Hits 1 to 20 of 572

_id sigradi2004_415
id sigradi2004_415
authors Carmen Aroztegui
year 2004
title The solitary confinement cell of punta de rieles: A place with stories to tell
source SIGraDi 2004 - [Proceedings of the 8th Iberoamerican Congress of Digital Graphics] Porte Alegre - Brasil 10-12 november 2004
summary Different people remember the same place differently. The question posed by my research is about how to create a visualization of a place that presents different personal recollections. My research addresses this issue through a case study: the visualization of a women.s political prison, located in Punta de Rieles, Uruguay, during the Uruguayan dictatorship (1973-85). The visualization will be based on the memories recounted by these women. My research will result in a written report and an audiovisual installation. The installation will provide an immersive experience centered on the solitary confinement cell. The implementation suggests changes in lighting in the solitary confinement cell as the main formal expression of the variations in the women.s testimonies.
keywords Visualization, subjectivity, memories, immersion, prison
series SIGRADI
email
last changed 2016/03/10 09:48

_id acadia08_072
id acadia08_072
authors Frumar, Jerome
year 2008
title An Energy Centric Approach to Architecture: Abstracting the material to co-rationalize design and performance
doi https://doi.org/10.52842/conf.acadia.2008.072
source Silicon + Skin: Biological Processes and Computation, [Proceedings of the 28th Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) / ISBN 978-0-9789463-4-0] Minneapolis 16-19 October 2008, 72-81
summary This paper begins by exploring matter as an aggregated system of energy transactions and modulations. With this in mind, it examines the notion of energy driven form finding as a design methodology that can simultaneously negotiate physical, environmental and fabrication considerations. The digital workspace enables this notion of form finding to re-establish itself in the world of architecture through a range of analytic tools that algorithmically encode real world physics. Simulating the spatial and energetic characteristics of reality enables virtual “form generation models that recognize the laws of physics and are able to create ‘minimum’ surfaces for compression, bending [and] tension” (Cook 2004). The language of energy, common in engineering and materials science, enables a renewed trans-disciplinary dialogue that addresses significant historic disjunctions such as the professional divide between architects and engineers. Design becomes a science of exploring abstracted energy states to discover a suitable resonance with which to tune the built environment. ¶ A case study of one particular method of energy driven form finding is presented. Bi-directional Evolutionary Structural Optimization (BESO) is a generative engineering technique developed at RMIT University. It appropriates natural growth strategies to determine optimum forms that respond to structural criteria by reorganizing their topology. This dynamic topology response enables structural optimization to become an integrated component of design exploration. A sequence of investigations illustrates the flexibility and trans-disciplinary benefits of this approach. Using BESO as a tool for design rather than purely for structural optimization fuses the creative approach of the architect with the pragmatic approach of the engineer, enabling outcomes that neither profession could develop in isolation. The BESO case study alludes to future design processes that will facilitate a coherent unfolding of design logic comparable to morphogenesis.
keywords Energy; Form-Finding; Morphogenesis; Optimization; Structure
series ACADIA
last changed 2022/06/07 07:50

_id 2004_500
id 2004_500
authors Hanzl, Malgorzata and Wrona, Stefan
year 2004
title Visual Simulation as a Tool for Planning Education - Computer Aided Participation Support
doi https://doi.org/10.52842/conf.ecaade.2004.500
source Architecture in the Network Society [22nd eCAADe Conference Proceedings / ISBN 0-9541183-2-4] Copenhagen (Denmark) 15-18 September 2004, pp. 500-507
summary Contemporary computer techniques offer many new opportunities to engage citizens into the planning process. There are new possibilities of interaction, introducing an observer into the “game”. The research project presented in the paper assumes the use of a visual 3D language which consists of a series of schematic types of buildings. They form a language which is easy to understand both by professionals and by laymen. Understanding is the very first step towards getting convinced by the ideas presented. The next step is interaction - the user’s action induces the response of the system. The solution proposed by the user meets an evaluation from the part of the system which evokes the user’s interest - in the case presented here the evaluation introduces the simulation of future state of the site. The problem posed is to find out the best way to convince people that some places are less or more suitable for settlement, depending on the media present there, distance from the urban areas and the environment protection. The attempt to create a tool which could be helpful in an educational process is described in the paper. The idea is to prepare a form of a master plan record which uses the visual 3D language and may be accessed via World Wide Web pages. The paper formulates the assessments for the software described above and examines the possibility to create an application. The trial to prepare a web based service using the flash and shockwave technology is presented.
series eCAADe
email
last changed 2022/06/07 07:49

_id avocaad_2003_13
id avocaad_2003_13
authors John L. Heintz
year 2003
title Communication and Value in Networked Design Coalitions
source LOCAL VALUES in a NETWORKED DESIGN WORLD - ADDED VALUE OF COMPUTER AIDED ARCHITECTURAL DESIGN, Stellingwerff, Martijn and Verbeke, Johan (Eds.), (2004) DUP Science - Delft University Press, ISBN 90-407-2507-1.
summary The advent of the Internet has led us to believe that we live in an era of unprecedented globalization. In the field of building design, we now expect both that the local market for design services will be altered, and that many firms will take up the opportunity to pursue commissions beyond their local market. To some extent this is true, but it is instructive to recall that in the 19th century London based architectural firms and public works designers designed buildings throughout the Empire. Designing for projects beyond the local market is not new, what is new is our expectation that such a task is now fundamentally altered, made easier and more transparent, by the abundance of new communications technologies.It remains the case that working outside one’s local context is difficult and that when doing so, problems are likely to arise out of cultural differences. Distance too imposes its burdens, as the possibility to meet other members of the team face to face is reduced as the travel costs increase. This breaks down the possibilities of building informal networks among the individual designers working for the firms that are members of the design team. A re-instantiation of this informal network can only be done on the basis of a model of formal and informal communication in the design team. Many of the difficulties of collaborative work outside one’s local market are problems that have already been with us a long time. These problems arise out of the fact that buildings are designed by heterogeneous groups of people. The members of such groups must communicate with each other to share information and coordinate decisions and actions. Yet they are in different relations to the project at hand and have differing values arising out of their different backgrounds. This leads inevitably to conflict. Therefore, if we are to discuss communication and value then we must devote our attentions to conflict.
keywords Architecture, Local values, Globalisation, Computer Aided Architectural Design, Communication, values, informal communication, value resolution, design team, design coalition.
series AVOCAAD
email
last changed 2006/01/16 21:38

_id 408caadria2004
id 408caadria2004
authors Kuhn Park, Ramesh Krishnamurti
year 2004
title Flexible Design Representation for Construction
doi https://doi.org/10.52842/conf.caadria.2004.671
source CAADRIA 2004 [Proceedings of the 9th International Conference on Computer Aided Architectural Design Research in Asia / ISBN 89-7141-648-3] Seoul Korea 28-30 April 2004, pp. 671-680
summary A high percentage of overall defects in the built environment occurs during the construction period. Some of these relate to design and the others relate to construction. The detection and reasoning of defects requires involvement of multiple expertise. Researchers in the School of Architecture, the Robotics Institute, and the Department of Civil and Environmental Engineering at Carnegie Mellon University are investing ways to integrate suites of emerging evaluation technologies to help find, record, manage, and limit the impact of construction defects. As part of this effort, the researchers have conducted case studies on construction sites near Pittsburgh, Pennsylvania. Each case study serves as a test-bed to measure the feasibility of our approach and to discover problems. In this paper, we discuss the overall project work flow in which we emphasize the importance of a flexible representation for construction, and describe our solution using a concept of representational flexibility named sorts.
series CAADRIA
email
last changed 2022/06/07 07:52

_id 409caadria2004
id 409caadria2004
authors Masayuki Okada, Kazuhisa Iki, Sadayuki Shimoda
year 2004
title Development of CAFM System for LCM on Building Maintenance and Management
doi https://doi.org/10.52842/conf.caadria.2004.681
source CAADRIA 2004 [Proceedings of the 9th International Conference on Computer Aided Architectural Design Research in Asia / ISBN 89-7141-648-3] Seoul Korea 28-30 April 2004, pp. 681-692
summary The purpose of this study is to develop a Computer Aided Facility Management (CAFM) system to assist the optimal Life Cycle Management (LCM) business, especially in the repair and renewal planning works of the inhabited building Life Cycle Cost (LCC). This system is also useful for annual, mid and long term facility maintenance budget planning. Major steps of this study are as follows: (1) A Study on the actual process of the LCM business was undertaken to determine the required functions of the CAFM system. (2) We surveyed the calculation process of the LCC and examined the data processing method in order to determine an efficient LCC calculation method for the CAFM system. (3) Based on the above result, we developed each function required for the CAFM system. (4) The CAFM system was developed by unifying the above functions in a network browser environment such as data transaction management between database, LCC calculation and graphical representation applications. (5) We evaluate the CAFM system by using case studies of LCM works on actual buildings. This system contributes to the efficient maintenance works of the LCC, and is able to support the appropriate scheduling of LCM works.
series CAADRIA
email
last changed 2022/06/07 07:59

_id 2004_318
id 2004_318
authors Ng, Edward
year 2004
title Optimise Urban Daylight Design Using Computational Simulations
doi https://doi.org/10.52842/conf.ecaade.2004.318
source Architecture in the Network Society [22nd eCAADe Conference Proceedings / ISBN 0-9541183-2-4] Copenhagen (Denmark) 15-18 September 2004, pp. 318-324
summary Urban design is about providing an infrastructure for its inhabitants. An important consideration of design is to provide natural outdoor conditions that are pleasant and conductive to human activities. A well designed outdoor urban environment will also make the design of individual buildings within it easier. There are many design parameters, for example: Development Density, Plot ratio, Site Coverage, Skyline, Building to Space Ratio, Permeability, Building Shapes and so on. This paper reports a study based on „skylines“ as a design parameter, and how it affects daylight and natural ventilation provisions and performance. Experiments are conducted with physical models in artificial sky, as well as using computational lighting simulations. The study establishes that by varying the skylines of the city, the overall daylight performances could be improved when compared to a city with a uniform skyline - given the same density. The message of the paper is that: through better understanding and design, high density cities could be planned and optimised without losing the development efficacy of the land.
keywords Daylight; Parametric Study; Urban Design; Density
series eCAADe
email
last changed 2022/06/07 07:58

_id avocaad_2003_06
id avocaad_2003_06
authors Arturo F. Montagu and Juan Pablo Cieri
year 2003
title Urbamedia - Development of an urban database of fragments of some Argentinian and Latin-American cities using digital technology
source LOCAL VALUES in a NETWORKED DESIGN WORLD - ADDED VALUE OF COMPUTER AIDED ARCHITECTURAL DESIGN, Stellingwerff, Martijn and Verbeke, Johan (Eds.), (2004) DUP Science - Delft University Press, ISBN 90-407-2507-1.
summary The proposal of "Urbamedia" is to undertake the development of 3D virtual and interactive models of historical areas of Latin-American cities. The selected zone is the "Mayo Avenue" including the "Mayo Square", an historical place of the city of Buenos Aires, Argentina; this project is financed by the National Agency of Scientific and Technological Development of Argentina and the University of Buenos Aires.We are presenting the first experimental model of the "Mayo Square" that has been developed at ABACUS, Department of Architecture & Building Aids Computer Unit, University of Strathclyde UK. combined with a system analysis of urban activities using the “Atlas.ti” CAQDAS software.This particular use of the “Atlas.ti” software is under experimental applications to this type of urban analysis procedures; allowed us the possibility to analysed a set of activities by means of graph theory as result of a series of interviews to the people working in the area. We are also looking to include historical areas of three cities: Mar del Plata, Rosario and Santa Fe (Argentina) and eventually other cities from Latin América as Rio de Janeiro and Habana.Due that ABACUS has a strong experience in city modelling plus the powerful software and hardware used there, we must develop a VRML customized menu to be adapted to our low cost PC equipment. The 3D model will be used mainly in urban design simulation procedures and the idea is to extend to other type of simulations of the environmental parameters.
keywords Architecture, Local values, Globalisation, Computer Aided Architectural Design
series AVOCAAD
email
last changed 2006/01/16 21:38

_id 506b
id 506b
authors Christenson, Mike
year 2009
title Testing the relevance of parameterization to architectural epistemology
source Architectural Science Review, Volume 52.2: 135-141
summary Advances in building information modeling (BIM) deeply impact the production of new architecture; its benefits are obvious and its acceptance widespread. But how does BIM impact the study of existing architecture? Can BIM be assumed to operate as a neutral framework, equally applicable to the study of architecture anywhere? Using as a point of departure a recent outline of the conceptual structure of parametric modeling prepared by Sacks, Eastman, and Lee (2004), this paper compares parametric models of two existing works of architecture: Mies van der Rohe’s Crown Hall and Peter Zumthor’s St. Benedict Chapel. The processes of parametrically modeling each building are specifically compared in two ways: first, parameters are established for each model; second, each model is "flexed" as a means of disclosing possible semantic relationships within each work of architecture. Because each building demands a different parameter-establishment strategy, and because the models permit different degrees of flexibility, the comparison illustrates the shortcomings of a "neutral framework" assumption to an architectural epistemology.
keywords Existing architecture, Parametric modeling, Representation
series journal paper
type normal paper
email
more http://www.earthscanjournals.com/asre/052/asre0520135.htm
last changed 2009/06/18 14:24

_id sigradi2004_307
id sigradi2004_307
authors Eduardo Wagner Rogério
year 2004
title Utilização dos dados do programa de saúde da família como subsídio para a construção de um sistema geográfico de informações [The Use of Data from the "Family Health Program" to support a GIS Construction]
source SIGraDi 2004 - [Proceedings of the 8th Iberoamerican Congress of Digital Graphics] Porte Alegre - Brasil 10-12 november 2004
summary The objective of this paper is to develop a methodology in integrated municipal planning in Family Health, using tools such as the Geographic Information System and programs already implemented in towns, to provide the methodology of sustainable and participative urbanization derived from new federal, state and municipal legislations. By the end of the study it was possible to build a data model spacial oriented, located in Tubarão, Santa Catarina, at Dehon and Morrotes suburbs, achieving about 6 thousand people. The obtained results justify the implementaion of a Geographic Information System in health, in order to manage the daily collected data in Family Health Program, optimizing and helping in the application of public politics. Key words: Family Health, Geographic Information System, Public Politics, Daily Collection.
series SIGRADI
email
last changed 2016/03/10 09:51

_id sigradi2004_206
id sigradi2004_206
authors Felipe Carrara Moura Pussente
year 2004
title Interfaces digitais para processo de projeto participativo: Estudo de caso com mutirões [Digital Interfaces for a Participatory Project: The Case Study of mutirões]
source SIGraDi 2004 - [Proceedings of the 8th Iberoamerican Congress of Digital Graphics] Porte Alegre - Brasil 10-12 november 2004
summary This research is applied to self-managed building, objecting housing construction projects and identifying the self-managed particularities to achieve a better quality in the architectural project and a better quality of life for its users. The digital training of a group of homeless people can expanded through the distribution of interfaces over the internet, developing methodological procedures at the process of conception, implementation and enlargement of housing construction in self-managed building. The making of interactive interface is analyzed through experimentation and workshops done with homeless people having the goal to be totally friendly to its user, not letting him become confused or bored.
series SIGRADI
email
last changed 2016/03/10 09:51

_id ascaad2004_paper16
id ascaad2004_paper16
authors Hassan, R.; K. Jorgensen
year 2004
title Computer Visualizations in Planning
source eDesign in Architecture: ASCAAD's First International Conference on Computer Aided Architectural Design, 7-9 December 2004, KFUPM, Saudi Arabia
summary A wide range of visualizations have been developed and implemented as tools for urban simulations and visual impact assessment. These include: plans, diagrams, elevations, perspective sketches, renderings, modified photographs (photo renderings and photomontages), slide projections, scale models, movies, videotapes and computer graphics. In the last decade, graphical computer applications have proven to be an increasingly supportive tool in visualization and manipulation of graphical material. This study presents the state of the art of computer visualization in planning. More specifically, the use of web-based computerized visualizations for landscape visual simulation, with the aim to develop a system of visualization techniques as an aid to communicating planning and design scenarios for historically important landscapes and urban places, with particular attention to the city of Nablus in Palestine. This has led to the evaluation of possibilities and potentials of computer use in this field, and to the definition of the visual problems and challenges of the city of Nablus. This study will argue what extra one can draw from computerized visualizations, what is likely to be its impact on future planning and design research, and what this visualization experience really means for historical important locations as in Nablus. The study demonstrates that computerized visualizations can be a powerful tool in representing a cityscape in three-dimensions from different angels. Visualizations will allow better understanding of the components of the city, its landscapes, city features and the process of change. In this way it may provide new and better platforms for public participation in planning.
series ASCAAD
email
last changed 2007/04/08 19:47

_id 1959
id 1959
authors Heylighen, Ann; Martin, W Mike; Cavallin, Humberto
year 2004
title FROM REPOSITORY TO RESOURCE -- EXCHANGING STORIES OF AND FOR ARCHITECTURAL PRACTICE
source Journal of Design Research, Volume 4, Issue 1, 2004 [ISSN 1569-1551]
summary Central to Case-Based Reasoning (CBR) is the claim that knowledge in human memory takes the form of cases, i.e. interpreted representations of concrete experiences. The intimate relationship between knowledge and experience in design has inspired CBR researchers to develop various Case-Based Design tools, which try to support architects (and designers in general) in capitalizing on previous design experience. Typically, these tools is built around a case base, an indexed collection of concrete cases labeled by a set of characteristic features. In general, cases document buildings, i.e. design products. By contrast, Building Stories has chosen to complement product data by stories about the process that generated the product. Previous papers have documented and illustrated the ideas underlying Building Stories and situated the methodology with regard to other case study approaches. The present paper focuses on establishing the growing repository of building stories into a valuable resource of and for the profession.
series other
type normal paper
email
more http://jdr.tudelft.nl/articles/issue2004.01/Art3.html
last changed 2005/01/26 22:50

_id ddss2008-08
id ddss2008-08
authors Koshak, Nabeel A.; Abdullah Fouda
year 2008
title Analyzing Pedestrian Movement in Mataf Using GPSand GIS to Support Space Redesign
source H.J.P. Timmermans, B. de Vries (eds.) 2008, Design & Decision Support Systems in Architecture and Urban Planning, ISBN 978-90-6814-173-3, University of Technology Eindhoven, published on CD
summary Evaluating the use of architectural and urban spaces is an important issue for architects and urban designers who wish to enhance space usability. Space usability is crucial in crowded spaces such as Mataf areas. Millions of people come to the city of Makkah, Saudi Arabia every year to perform Hajj (Islamic Pilgrimage) and Umrah. A cornerstone of Hajj and Umrah spirituals is to perform Tawaf, which is the circumambulation of the Ka'bah in the center of the Holy Mosque in Makkah. The areas of performing Tawaf (called Mataf) become very crowded during Hajj and the last ten days of Ramadan. This paper demonstrates how we utilized Global Positioning Systems (GPS) and Geographic Information Systems (GIS) to analyze pedestrian movement while performing Tawaf. During the Hajj of 1424 H (2004 in the Georgian Calendar), several GPS devices were used to collect pedestrian movement coordinates at specific time intervals. Computer software for tracking analysis is used to visualize and analyze the pattern of pedestrian movement in Tawaf. The software allows users to view temporal data, which can be set up with past time windows for historical data analysis. The findings of this research show levels of service and flow rates throughout different zones and times of Mataf. They indicate the most critical zones and times for Tawaf during Hajj. They also visually demonstrate the track pattern of pedestrian movement at different locations in the Tawaf area. The paper concludes with some redesign recommendations to remove obstacles and facilitate pedestrian movement in Tawaf. The approach described in this paper can be implemented in architectural and urban design space modifications to improve pedestrian movement in open spaces.
keywords Pedestrian movement analysis, GPS, GIS, Hajj, Makkah, Tawaf
series DDSS
last changed 2008/09/01 17:06

_id ecaade2008_081
id ecaade2008_081
authors LaBelle, Guillaum; Nembrini, Julien; Huang , Jeffrey
year 2008
title Simulation-Driven Design System
doi https://doi.org/10.52842/conf.ecaade.2008.469
source Architecture in Computro [26th eCAADe Conference Proceedings / ISBN 978-0-9541183-7-2] Antwerpen (Belgium) 17-20 September 2008, pp. 469-476
summary This paper presents a design process efficiently involving parametric design, realistic physical simulation and rapid-prototyping fabrication for contextual shape adaptation. This case study focuses on lighting simulation for the specific problem of solar energy harvesting. Inspired by the phototropic mechanism, the ability of plants to grow according to the availability of light, an innovative design technique is defined, taking its root in the morphogenetic design school [Hensel, 2004].
keywords Parametric,Simulation, Generative Design, CAD, Phototropism
series eCAADe
email
last changed 2022/06/07 07:52

_id 2005_147
id 2005_147
authors Lai, Ih-Cheng
year 2005
title Infilling Time into Space - A Pedagogical Approach for Evolving Space Using Digital Media
doi https://doi.org/10.52842/conf.ecaade.2005.147
source Digital Design: The Quest for New Paradigms [23nd eCAADe Conference Proceedings / ISBN 0-9541183-3-2] Lisbon (Portugal) 21-24 September 2005, pp. 147-154
summary This paper presents a pedagogical approach to explore the relationships between time and space by using digital media. Based on a pedagogical model called e-Space proposed by Lai (2004), we apply motion as a spatial issue to approach this study. Through integrating with the characteristics of digital media, students are encouraged to evolve architectural space and form by decomposing, re-organizing, interpreting and realizing the spatial composition. Simultaneously, diverse digital media applications integrated with design thinking in a design process enables students to bridge two design spaces - physical and virtual. This process introduces the students to a new approach of design-creation and form finding. Finally, we use an advanced digital media course as an example to understand the impacts of the pedagogical approach. The students’ outcomes are also reported in this paper
keywords Digital Media, Pedagogy, Motion, Design Space, Design Learning
series eCAADe
email
last changed 2022/06/07 07:52

_id ijac20032109
id ijac20032109
authors Lang, Silke
year 2004
title Interactive Spaces for Advanced Communication using 3D Video
source International Journal of Architectural Computing vol. 2 - no. 1
summary Architects integrate more and more modern information technologies in their projects. Based on this background the use of 3D video in an architectural context is discussed. The combination of real-time 3D video and blue-c technology for a distributed shopping experience in shared virtual shops is described. IN: SHOP illustrates an approach to enhance physical environments in shopping areas and connects geographically distant persons. These technologies offer new architectural design possibilities. The traditional understanding of location, space, and time may be redefined. Interactive spaces are being designed, modified and experienced. We believe that information technologies have an impact on buildings and architecture.
series journal
email
more http://www.multi-science.co.uk/ijac.htm
last changed 2007/03/04 07:08

_id ijac20032207
id ijac20032207
authors Liapi, Katherine A.; Kim, Jinman
year 2004
title A Parametric Approach to the Design of Vaulted Tensegrity Networks
source International Journal of Architectural Computing vol. 2 - no. 2
summary Significant new research in tensegrity theory and technology encourages tensegrity’s implementation in architecture. A recently developed technology makes possible the rapid modular assembly of deployable tensegrity units, and the construction of alternate curved configurations by re-using the same modules. Although a form exploration method for tensegrity structures already exists, estimating the structure’s new geometry remains a challenge due to difficulties designers encounter in understanding and following the method’s geometric construction process. Besides, the method doesn’t address the geometry of vaulted configurations. This paper presents algorithms that link together the geometric parameters that determine the shape of tensegrity vaults by addressing different design-construction scenarios, and a software code that generates parametric models of tensegrity vaulted structures.The application of the algorithms to the morphological study of a tensegrity vaulted dome, which constituted the main feature of an entry to arecent international architectural competition, is also presented.
series other
type normal paper
more http://www.multi-science.co.uk/ijac.htm
last changed 2010/05/16 09:13

_id sigradi2004_036
id sigradi2004_036
authors Lucía Gómez; Lola Vico
year 2004
title Infografia aplicada al patrimonio cultural: El caso del ninfeo de campetti (Veio) [Infographics Applied to Cultural Heritage: The Case of "Ninfeo de Campetti (Veio)"]
source SIGraDi 2004 - [Proceedings of the 8th Iberoamerican Congress of Digital Graphics] Porte Alegre - Brasil 10-12 november 2004
summary This paper presents the results of an in-depth study and virtual reconstruction of the Nymphaeum of Veio, in the archaeological zone of Villa Campetti, Rome. The study consisted in analysing the vestiges and enlightening the findings with a thorough literature review about the Nymphaeum itself as well as about contemporary and similar constructions. A digital model was then elaborated, as an attempt to recreate the Nymphaeum of Veio as it may have stood during the Roman period. The Nymphaeum had been decorated with roman frescoes of the III style, now highly deteriorated. The virtual reconstruction intends to reproduce the harmony of volumes, structure and paintings of the chamber. It also helps to better understand its configuration. This kind of reconstruction, based on historical and architectural research, offers great possibilities in the world or architectonic and archaeological heritage, allows the recovery and analysis of spaces otherwise lost forever.
series SIGRADI
email
last changed 2016/03/10 09:55

_id ascaad2004_paper15
id ascaad2004_paper15
authors Mallasi, Z.
year 2004
title Identification and Visualisation of Construction Activities’ Workspace Conflicts Utilising 4D CAD/VR Tools
source eDesign in Architecture: ASCAAD's First International Conference on Computer Aided Architectural Design, 7-9 December 2004, KFUPM, Saudi Arabia
summary This work addresses the problem arising on all construction sites: the occurrence of workspace interference between construction activities. From a site space planning context, this problem can lead to an inevitable roadblock to the progress of the scheduled construction operations. In real situations, when the spatial congestions occur, they could reduce productivity of workers sharing the same workspace and may cause health and safety hazard issues. The aim of this paper is on presenting a computer-based method and developed tool to assist site managers in the assignment and identification of workspace conflicts. The author focuses on the concept of ‘visualising space competition’ between the construction activities. The concept is based on a unique representation of the dynamic behaviour of activity workspace in 3D space and time. An innovative computer-based tool dubbed PECASO (Patterns Execution and Critical Analysis of Site-space Organisation) has been developed. The emerging technique of 4D (3D + time) visualisation has been chosen to yield an interesting 4D space planning and visualisation tool. A multi-criteria function for measuring the severity of the workspace congestions is designed, embedding the spatial and schedule related criteria. The paper evaluates the PECASO approach in order to minimise the workspace congestions, using a real case study. The paper concludes that the PECASO approach reduces the number of competing workspaces and the conflicting volumes between occupied workspace, which in turn produces better assessment to the execution strategy for a given project schedule. The system proves to be a promising tool for 4D space planning; in that it introduces a new way of communicating the programme of work.
series ASCAAD
email
last changed 2007/04/08 19:47

For more results click below:

this is page 0show page 1show page 2show page 3show page 4show page 5... show page 28HOMELOGIN (you are user _anon_889895 from group guest) CUMINCAD Papers Powered by SciX Open Publishing Services 1.002