Cumincad : CUMINCAD Papers : Search Results

CumInCAD is a Cumulative Index about publications in Computer Aided Architectural Design
supported by the sibling associations ACADIA, CAADRIA, eCAADe, SIGraDi, ASCAAD and CAAD futures

PDF papers
References

Hits 1 to 20 of 572

Reformat results as: short short into frame detailed detailed into frame

_id	ddss2004_ra-177
id	ddss2004_ra-177
authors	Ballas, D., R. Kingston, and J. Stillwell
year	2004
title	Using a Spatial Microsimulation Decision Support System for Policy Scenario Analysis
source	Van Leeuwen, J.P. and H.J.P. Timmermans (eds.) Recent Advances in Design & Decision Support Systems in Architecture and Urban Planning, Dordrecht: Kluwer Academic Publishers, ISBN: 1-4020-2408-8, p. 177-191
summary	This paper discusses the potential of a spatial microsimulation-based decision support system for policy analysis. The system can be used to describe current conditions and issues in neighbourhoods, predict future trends in the composition and health of neighbourhoods and conduct modelling and predictive analysis to measure the likely impact of policy interventions at the local level. A large dynamic spatial micro-simulation model is being constructed for the population of Leeds (approximately 715,000 individuals) based on spatial microsimulation techniques in conjunction with a range of data, including 2001 Census data for Output Areas and sample data from the British Household Panel Survey. The project has three main aims as follows: (i) to develop a static microsimulation model to describe current conditions in Leeds; (ii) to enable the performance of ‘What if?’ analysis on a range of policy scenarios; and (iii) to develop a dynamic microsimulation model to predict future conditions in Leeds under different policy scenarios. The paper reports progress in meeting the above aims and outlines the associated difficulties and data issues. One of the significant advantages of the spatial microsimulation approach adopted by this project is that it enables the user to query any combination of variables that is deemed desirable for policy analysis. The paper will illustrate the software tool being developed in the context of this project that is capable of carrying out queries of this type and of mapping their results. The decision support tool is being developed to support policy-makers concerned with urban regeneration and neighbourhood renewal.
keywords	Spatial Microsimulation, Spatial Decision Support Systems, Geotools
series	DDSS
last changed	2004/07/03 22:13

_id	ddss2004_ra-129
id	ddss2004_ra-129
authors	Ma, L., Th. Arentze, A. Borgers, and H. Timmermans
year	2004
title	Using Bayesian Decision Networks for Knowledge Representation under Conditions of Uncertainty in Multi-Agent Land Use Simulation Models
source	Van Leeuwen, J.P. and H.J.P. Timmermans (eds.) Recent Advances in Design & Decision Support Systems in Architecture and Urban Planning, Dordrecht: Kluwer Academic Publishers, ISBN 1-4020-24088, p. 129-144
summary	Land suitability analysis typically involves the assessment of the suitability of land units without knowing the future spatial distribution of land use. Traditional planning techniques have used “algebraic equations” to express land suitability as a weighted function of suitability scores across multiple criteria. However, the existing multi-criteria evaluation methods do not systematically account for uncertainty about the land use in adjacent and other cells. This paper proposes an alternative approach to land suitability analysis that does address the problem of uncertainty. In particular, Bayesian decision networks are suggested as a means of knowledge representation for agents in a multi-agent land use simulation system. Bayesian decision networks model the uncertainty in terms of probabilities specified in the network representing the expertise of specialists with respect to specific land uses. This paper discusses the approach and illustrates its use in the context of a retail agent.
keywords	Land Suitability Analysis, Multi-Agents, Knowledge Representation, Bayesian Decision Networks
series	DDSS
last changed	2004/07/03 22:13

_id	ecaade2007_187
id	ecaade2007_187
authors	Pratschke, Anja; Tramontano, Marcelo
year	2007
title	No Man is an Island (Even in the Virtual World): The Online_Communities Project
source	Predicting the Future [25th eCAADe Conference Proceedings / ISBN 978-0-9541183-6-5] Frankfurt am Main (Germany) 26-29 September 2007, pp. 703-709
doi	https://doi.org/10.52842/conf.ecaade.2007.703
summary	This article is based on the results of various research projects on the use of Information and Communication Technologies (ICT) to reduce the digital divide in poor neighborhoods at Nomads.usp Research Center (Center for Studies on Interactive Living, www.eesc.usp.br/nomads). Among them is the Online_Communities project, which has been financed by the São Paulo State Research Funding Agency - FAPESP since 2004 involving four research groups from both the Architecture and Computer Science departments at the University of São Paulo and various public and non-governmental organizations. The Online_Communities project proposes a diversified approach in order to cover the different aspects of the conception and implementation of a specific geographical complex communication system in a mixed reality scenario. It includes its network, the requalification of a local telecenter, meta-recycling activities, setting-up a graphic interface and presenting some workshops.
keywords	Public policies, Brazil, digital divide, collaborative network, interface
series	eCAADe
email
last changed	2022/06/07 08:00

_id	ijac20032205
id	ijac20032205
authors	Yi-Luen Do, Ellen; Gross, Mark D.
year	2004
title	Let There be Light! Knowledge-Based 3-D Sketching Design Tools
source	International Journal of Architectural Computing vol. 2 - no. 2
summary	This paper presents a framework for 3D knowledgebasedsketching tools for lighting design and twosoftware prototypes built to illustrate sketch-basedinteraction with intelligent systems in 3-D domains.Spot supports direct sunlight simulation andvisualization in a selected time period and Light Pensupports placement of electric lighting designs to lightan intended area in space. In both examples, a 3-Dsketching front-end is coupled with a back-endknowledge-based system. This enables a designer topose a problem by drawing onto a 3-D model towhich the knowledge-based system offers a solution –in one case by providing quantitative data analysis; inthe other by modifying the 3-D model. Spot and LightPen’s specific domain of architectural lighting designexemplifies a more general class of 3-D interactionwith intelligent systems.
series	journal
email
more	http://www.multi-science.co.uk/ijac.htm
last changed	2007/03/04 07:08

_id	ascaad2004_paper11
id	ascaad2004_paper11
authors	Abdelfattah, Hesham Khairy and Ali A. Raouf
year	2004
title	No More Fear or Doubt: Electronic Architecture in Architectural Education
source	eDesign in Architecture: ASCAAD's First International Conference on Computer Aided Architectural Design, 7-9 December 2004, KFUPM, Saudi Arabia
summary	Operating electronic and Internet worked tools for Architectural education is an important, and merely a prerequisite step toward creating powerful tele-collabortion and tele-research in our Architectural studios. The design studio, as physical place and pedagogical method, is the core of architectural education. The Carnegie Endowment report on architectural education, published in 1996, identified a comparably central role for studios in schools today. Advances in CAD and visualization, combined with technologies to communicate images, data, and “live” action, now enable virtual dimensions of studio experience. Students no longer need to gather at the same time and place to tackle the same design problem. Critics can comment over the network or by e-mail, and distinguished jurors can make virtual visits without being in the same room as the pin-up—if there is a pin-up (or a room). Virtual design studios (VDS) have the potential to support collaboration over competition, diversify student experiences, and redistribute the intellectual resources of architectural education across geographic and socioeconomic divisions. The challenge is to predict whether VDS will isolate students from a sense of place and materiality, or if it will provide future architects the tools to reconcile communication environments and physical space.
series	ASCAAD
email
last changed	2007/04/08 19:47

_id	ascaad2004_paper4
id	ascaad2004_paper4
authors	Ahmad, Sumbul and Scott C. Chase
year	2004
title	Design Generation of the Central Asian Caravanserai
source	eDesign in Architecture: ASCAAD's First International Conference on Computer Aided Architectural Design, 7-9 December 2004, KFUPM, Saudi Arabia
summary	Challenges for the study of Islamic architecture include its abundance and diversity in expression and its classification based on distinct functional or stylistic types. We address these issues by presenting shape grammars as a methodology for the analysis and design generation of Islamic architecture, with a specific example in the form of a parametric shape grammar for central Asian caravanserais. The grammar is developed by identifying distinct design types. Shape rules are created based on a study of the spatial elements and their organisation in the designs. We illustrate the utility of the grammar by deriving an extant design and as well as, previously unknown designs. We conclude by discussing possible extensions to the current grammar and future work involving the development of a grammar based framework for the comparative analysis of medieval Islamic courtyard buildings.
series	ASCAAD
email
last changed	2007/04/08 19:47

_id	avocaad_2003_06
id	avocaad_2003_06
authors	Arturo F. Montagu and Juan Pablo Cieri
year	2003
title	Urbamedia - Development of an urban database of fragments of some Argentinian and Latin-American cities using digital technology
source	LOCAL VALUES in a NETWORKED DESIGN WORLD - ADDED VALUE OF COMPUTER AIDED ARCHITECTURAL DESIGN, Stellingwerff, Martijn and Verbeke, Johan (Eds.), (2004) DUP Science - Delft University Press, ISBN 90-407-2507-1.
summary	The proposal of "Urbamedia" is to undertake the development of 3D virtual and interactive models of historical areas of Latin-American cities. The selected zone is the "Mayo Avenue" including the "Mayo Square", an historical place of the city of Buenos Aires, Argentina; this project is financed by the National Agency of Scientific and Technological Development of Argentina and the University of Buenos Aires.We are presenting the first experimental model of the "Mayo Square" that has been developed at ABACUS, Department of Architecture & Building Aids Computer Unit, University of Strathclyde UK. combined with a system analysis of urban activities using the “Atlas.ti” CAQDAS software.This particular use of the “Atlas.ti” software is under experimental applications to this type of urban analysis procedures; allowed us the possibility to analysed a set of activities by means of graph theory as result of a series of interviews to the people working in the area. We are also looking to include historical areas of three cities: Mar del Plata, Rosario and Santa Fe (Argentina) and eventually other cities from Latin América as Rio de Janeiro and Habana.Due that ABACUS has a strong experience in city modelling plus the powerful software and hardware used there, we must develop a VRML customized menu to be adapted to our low cost PC equipment. The 3D model will be used mainly in urban design simulation procedures and the idea is to extend to other type of simulations of the environmental parameters.
keywords	Architecture, Local values, Globalisation, Computer Aided Architectural Design
series	AVOCAAD
email
last changed	2006/01/16 21:38

_id	sigradi2006_e131c
id	sigradi2006_e131c
authors	Ataman, Osman
year	2006
title	Toward New Wall Systems: Lighter, Stronger, Versatile
source	SIGraDi 2006 - [Proceedings of the 10th Iberoamerican Congress of Digital Graphics] Santiago de Chile - Chile 21-23 November 2006, pp. 248-253
summary	Recent developments in digital technologies and smart materials have created new opportunities and are suggesting significant changes in the way we design and build architecture. Traditionally, however, there has always been a gap between the new technologies and their applications into other areas. Even though, most technological innovations hold the promise to transform the building industry and the architecture within, and although, there have been some limited attempts in this area recently; to date architecture has failed to utilize the vast amount of accumulated technological knowledge and innovations to significantly transform the industry. Consequently, the applications of new technologies to architecture remain remote and inadequate. One of the main reasons of this problem is economical. Architecture is still seen and operated as a sub-service to the Construction industry and it does not seem to be feasible to apply recent innovations in Building Technology area. Another reason lies at the heart of architectural education. Architectural education does not follow technological innovations (Watson 1997), and that “design and technology issues are trivialized by their segregation from one another” (Fernandez 2004). The final reason is practicality and this one is partially related to the previous reasons. The history of architecture is full of visions for revolutionizing building technology, ideas that failed to achieve commercial practicality. Although, there have been some adaptations in this area recently, the improvements in architecture reflect only incremental progress, not the significant discoveries needed to transform the industry. However, architectural innovations and movements have often been generated by the advances of building materials, such as the impact of steel in the last and reinforced concrete in this century. There have been some scattered attempts of the creation of new materials and systems but currently they are mainly used for limited remote applications and mostly for aesthetic purposes. We believe a new architectural material class is needed which will merge digital and material technologies, embedded in architectural spaces and play a significant role in the way we use and experience architecture. As a principle element of architecture, technology has allowed for the wall to become an increasingly dynamic component of the built environment. The traditional connotations and objectives related to the wall are being redefined: static becomes fluid, opaque becomes transparent, barrier becomes filter and boundary becomes borderless. Combining smart materials, intelligent systems, engineering, and art can create a component that does not just support and define but significantly enhances the architectural space. This paper presents an ongoing research project about the development of new class of architectural wall system by incorporating distributed sensors and macroelectronics directly into the building environment. This type of composite, which is a representative example of an even broader class of smart architectural material, has the potential to change the design and function of an architectural structure or living environment. As of today, this kind of composite does not exist. Once completed, this will be the first technology on its own. We believe this study will lay the fundamental groundwork for a new paradigm in surface engineering that may be of considerable significance in architecture, building and construction industry, and materials science.
keywords	Digital; Material; Wall; Electronics
series	SIGRADI
email
last changed	2016/03/10 09:47

_id	sigradi2005_225
id	sigradi2005_225
authors	Bianchi, Alejandra S.
year	2005
title	Education and innovation: present and future of teacher’s practice in digital graphic
source	SIGraDi 2005 - [Proceedings of the 9th Iberoamerican Congress of Digital Graphics] Lima - Peru 21-24 november 2005, vol. 1, pp. 225-229
summary	This is a qualitative research about the “educative training process” of Digital Graphic students, in the Architectural Department of Nordeste University- Argentina. The specific aim is “to know in depth the elements that influence in the educative training process in digital graphics”, to guide the propose of new teaching strategies to make better the teaching- learning process. The studied universe includes two architecture -students groups that are coursing first and second year of the career, since 2004. The first analysis categories, allow us to find out the meaning that pupils give to the facts, to build the training process dialectic. [Full paper in Spanish]
series	SIGRADI
email
last changed	2016/03/10 09:47

_id	ddss2008-33
id	ddss2008-33
authors	Charlton, James A.; Bob Giddings and Margaret Horne
year	2008
title	A survey of computer software for the urban designprocess
source	H.J.P. Timmermans, B. de Vries (eds.) 2008, Design & Decision Support Systems in Architecture and Urban Planning, ISBN 978-90-6814-173-3, University of Technology Eindhoven, published on CD
summary	Urban design is concerned with the shape, the surface and the physical arrangement of all kinds of urban elements, the basic components that make up the built environment, at the level of buildings, spaces and human activities. It is also concerned with the non-visual aspects of the environment, such as noise, wind and temperature and humidity. The city square is a particular urban element which can take many forms and its geometrical relationships such as maximum dimensions, ratio of width to length and building height to length have been analysed for centuries (Alberti 1475), (Vitruvius 1550), (Sitte 1889), (Corbett 2004). Within the current urban design process there are increasing examples of three dimensional computer representations which allow the user to experience a visual sense of the geometry of city squares in an urban landscape. Computer-aided design and Virtual Reality technologies have recently contributed to this visual assessment, but there have been limited attempts at 3D computer representations which allow the user to experience a greater sense of the urban space. This paper will describe a survey of computer tools which could support a more holistic approach to urban design and which could be used to simulate a number of urban texture and urban quality aspects. It will provide a systematic overview of currently available software that could support the simulation of building density, height, colour and style as well as conditions relating to noise, shading, heat, natural and artificial light. It will describe a methodology for the selection and filtering of appropriate computer applications and offer an initial evaluation of these tools for the analysis and representation of the three-dimensional geometry, urban texture and urban quality of city centre spaces. The paper is structured to include an introduction to the design criteria relating to city centre spaces which underpins this research. Next the systematic review of computer software will be described, and selected tools will undergo initial evaluation. Finally conclusions will be drawn and areas for future research identified.
keywords	Urban design, Software identification, 3D modelling, Pedestrian modelling, Wind modelling, Noise mapping, Thermal comfort, VR Engine
series	DDSS
last changed	2008/09/01 17:06

_id	ddss2004_ra-145
id	ddss2004_ra-145
authors	Devisch, O.T.J., H.J.P. Timmermans, T.A. Arentze, and A.W.J. Borgers
year	2004
title	Towards a Generic MultiAgent Engine for the Simulation of Spatial Behavioural Processes
source	Van Leeuwen, J.P. and H.J.P. Timmermans (eds.) Recent Advances in Design & Decision Support Systems in Architecture and Urban Planning, Dordrecht: Kluwer Academic Publishers, ISBN: 1-4020-2408-8, p. 145-160
summary	SwarmCity is being developed as a micro-simulation model, simulating the location-choice behaviour of a population of households, retailers, firms, developers, etc. reacting to an urban plan. The focus of SwarmCity lies –in a first phase- on the decision-making procedures of households, conceptualised as a series of three processes: awakening, search and choice. The methodology used to implement these processes makes use of life-time utility and decisionanalysis trees. The final model should work as a scenario-analysis tool, allowing planners, developers, retailers and municipalities to test interventionproposals, to evaluate legislations, to measure the attractiveness of services, to quantify residential mobility, etc. This paper illustrates the state of the art in household location-choice modelling and introduces a first attempt in developing a conceptual framework.
keywords	Micro Simulation, Multi-Agent Systems, Spatial Simulation Models, Scenario Analysis, Heuristic Decision-Making, Location-Choice Behaviour, DecisionAnalysis Trees, Residential Mobility, Lifetime Utility
series	DDSS
last changed	2004/07/03 22:13

_id	sigradi2004_240
id	sigradi2004_240
authors	Dora Castañé; Arturo F. Montagu
year	2004
title	Mercedes: De lo sustentable al ecoproyecto en poblados con patrimonio histórico [Mercedes: A Sustainable Ecoproject in Towns with Historical Patrimony]
source	SIGraDi 2004 - [Proceedings of the 8th Iberoamerican Congress of Digital Graphics] Porte Alegre - Brasil 10-12 november 2004
summary	This proposal addresses the following topic of a doctoral thesis in progress: The Evolution and Development of Digitized Processes for the Research and Maintenance of Small Town Patrimonies, School and Architecture and Urban Design, University of Buenos Aires, co-directed by architects A. Montagu and R. Gutierrez. The research has been based on the town of Mercedes, Province of Buenos Aires, Argentina, symbols of Buenos Aires.s cultural heritage. At this stage, we are looking for alternative methods to support a project of patrimonial preservation that would help define future landscapes of small towns, and, at the same time, would have minimal or positive environmental impact. This analysis proposes reflexive studies of the paradigms affecting the environment and the feasibility of the project, with the intention of utilizing the concept of .ecoproject.. Therefore, the crucial assistance of specific digital systems, from which evolution is analyzed, supports and enhances the efficiency of the proposed goal. New and broad research opportunities are opening up in this field.
keywords	Patrimony, research, virtual city, preservation
series	SIGRADI
email
last changed	2016/03/10 09:50

_id	sigradi2004_360
id	sigradi2004_360
authors	Eleanna Cadalso Vera
year	2004
title	Hmo: hibridos entre la maquina y el organismo. Procesos de aproximación a la realidad material [Hmo: Hybrids Between Machine and Organism. Processes to Approach Material Reality]
source	SIGraDi 2004 - [Proceedings of the 8th Iberoamerican Congress of Digital Graphics] Porte Alegre - Brasil 10-12 november 2004
summary	How do we imagine the future of accessories? Will they be made of metals such as gold, silver, bronze and precious stones? Or will they be conceived from new synthetic ergonomic and intelligent materials such as titanium, carbon, plastics and elastometers? HMO is an experimental project that investigates this area of design and science. Interested in the balance between technology and nature, this project seeks to participate in the new generation of accessories, conceived as artifacts made of smart material that will amplify our human senses and natural capacities in the near future.
series	SIGRADI
email
last changed	2016/03/10 09:51

_id	acadia08_072
id	acadia08_072
authors	Frumar, Jerome
year	2008
title	An Energy Centric Approach to Architecture: Abstracting the material to co-rationalize design and performance
source	Silicon + Skin: Biological Processes and Computation, [Proceedings of the 28th Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) / ISBN 978-0-9789463-4-0] Minneapolis 16-19 October 2008, 72-81
doi	https://doi.org/10.52842/conf.acadia.2008.072
summary	This paper begins by exploring matter as an aggregated system of energy transactions and modulations. With this in mind, it examines the notion of energy driven form finding as a design methodology that can simultaneously negotiate physical, environmental and fabrication considerations. The digital workspace enables this notion of form finding to re-establish itself in the world of architecture through a range of analytic tools that algorithmically encode real world physics. Simulating the spatial and energetic characteristics of reality enables virtual “form generation models that recognize the laws of physics and are able to create ‘minimum’ surfaces for compression, bending [and] tension” (Cook 2004). The language of energy, common in engineering and materials science, enables a renewed trans-disciplinary dialogue that addresses significant historic disjunctions such as the professional divide between architects and engineers. Design becomes a science of exploring abstracted energy states to discover a suitable resonance with which to tune the built environment. ¶ A case study of one particular method of energy driven form finding is presented. Bi-directional Evolutionary Structural Optimization (BESO) is a generative engineering technique developed at RMIT University. It appropriates natural growth strategies to determine optimum forms that respond to structural criteria by reorganizing their topology. This dynamic topology response enables structural optimization to become an integrated component of design exploration. A sequence of investigations illustrates the flexibility and trans-disciplinary benefits of this approach. Using BESO as a tool for design rather than purely for structural optimization fuses the creative approach of the architect with the pragmatic approach of the engineer, enabling outcomes that neither profession could develop in isolation. The BESO case study alludes to future design processes that will facilitate a coherent unfolding of design logic comparable to morphogenesis.
keywords	Energy; Form-Finding; Morphogenesis; Optimization; Structure
series	ACADIA
last changed	2022/06/07 07:50

_id	avocaad_2003_08
id	avocaad_2003_08
authors	Gernot Pittioni
year	2003
title	A World of Networks - Global and Local Impacts
source	LOCAL VALUES in a NETWORKED DESIGN WORLD - ADDED VALUE OF COMPUTER AIDED ARCHITECTURAL DESIGN, Stellingwerff, Martijn and Verbeke, Johan (Eds.), (2004) DUP Science - Delft University Press, ISBN 90-407-2507-1.
summary	As a couple of years ago the use of computers slowly entered studios of architecture, the development of operating systems actually enables everybody to control even bigger networks within studios or offices. Recently these local networks started to get networked themselves. Interactions between local design partners involve a large variety of problems• different CAD-systems• different versions of the same CAD-system• different methods of transfer• different security ideas• different levels of technical knowledge In the course of extension to a global level these problems in the first approach have been growing dramatically, involving additionally language and mentality problems. But in the outcome the exchange of documents and ideas improves in speed, quality and accuracy or this will at least happen in the near future.Global networking offers a great challenge, we have to give this matter a big deal of efforts to earn the values and results, which may be achieved.
keywords	Architecture, Local values, Globalisation, Computer Aided Architectural Design
series	AVOCAAD
email
last changed	2006/01/16 21:38

_id	2004_418
id	2004_418
authors	Gilles, H., Damien, H., Benoît, O. and Bignon, J.-C.
year	2004
title	A Scenario Approach to Validate and Demonstrate the Tool Usefulness in Cooperative Design
source	Architecture in the Network Society [22nd eCAADe Conference Proceedings / ISBN 0-9541183-2-4] Copenhagen (Denmark) 15-18 September 2004, pp. 418-425
doi	https://doi.org/10.52842/conf.ecaade.2004.418
summary	The social and economic context of architectural co-operative projects does not support the experimentations with dedicated tools. Therefore, we chose to achieve functional validations and operations of communication about tools usefulness with the use of scenarios. The scenario techniques are usually used in computer science to capture user’s needs and to validate software specifications. After having analyzed the different contexts of scenario usage in computer science, we characterize the specific context of the use of tools in cooperative activities. Then, we report some experiences of functional validation, of tool demonstration and of usefulness validation based on the use of scenarios. We explain in each experience the objectives and their implication in the scenario definition.
keywords	Scenario, Experimentation, Cooperation, Collaborative Tools
series	eCAADe
email
last changed	2022/06/07 07:50

_id	sigradi2006_e028c
id	sigradi2006_e028c
authors	Griffith, Kenfield; Sass, Larry and Michaud, Dennis
year	2006
title	A strategy for complex-curved building design:Design structure with Bi-lateral contouring as integrally connected ribs
source	SIGraDi 2006 - [Proceedings of the 10th Iberoamerican Congress of Digital Graphics] Santiago de Chile - Chile 21-23 November 2006, pp. 465-469
summary	Shapes in designs created by architects such as Gehry Partners (Shelden, 2002), Foster and Partners, and Kohn Peterson and Fox rely on computational processes for rationalizing complex geometry for building construction. Rationalization is the reduction of a complete geometric shape into discrete components. Unfortunately, for many architects the rationalization is limited reducing solid models to surfaces or data on spread sheets for contractors to follow. Rationalized models produced by the firms listed above do not offer strategies for construction or digital fabrication. For the physical production of CAD description an alternative to the rationalized description is needed. This paper examines the coupling of digital rationalization and digital fabrication with physical mockups (Rich, 1989). Our aim is to explore complex relationships found in early and mid stage design phases when digital fabrication is used to produce design outcomes. Results of our investigation will aid architects and engineers in addressing the complications found in the translation of design models embedded with precision to constructible geometries. We present an algorithmically based approach to design rationalization that supports physical production as well as surface production of desktop models. Our approach is an alternative to conventional rapid prototyping that builds objects by assembly of laterally sliced contours from a solid model. We explored an improved product description for rapid manufacture as bilateral contouring for structure and panelling for strength (Kolarevic, 2003). Infrastructure typically found within aerospace, automotive, and shipbuilding industries, bilateral contouring is an organized matrix of horizontal and vertical interlocking ribs evenly distributed along a surface. These structures are monocoque and semi-monocoque assemblies composed of structural ribs and skinning attached by rivets and adhesives. Alternative, bi-lateral contouring discussed is an interlocking matrix of plywood strips having integral joinery for assembly. Unlike traditional methods of building representations through malleable materials for creating tangible objects (Friedman, 2002), this approach constructs with the implication for building life-size solutions. Three algorithms are presented as examples of rationalized design production with physical results. The first algorithm [Figure 1] deconstructs an initial 2D curved form into ribbed slices to be assembled through integral connections constructed as part of the rib solution. The second algorithm [Figure 2] deconstructs curved forms of greater complexity. The algorithm walks along the surface extracting surface information along horizontal and vertical axes saving surface information resulting in a ribbed structure of slight double curvature. The final algorithm [Figure 3] is expressed as plug-in software for Rhino that deconstructs a design to components for assembly as rib structures. The plug-in also translates geometries to a flatten position for 2D fabrication. The software demonstrates the full scope of the research exploration. Studies published by Dodgson argued that innovation technology (IvT) (Dodgson, Gann, Salter, 2004) helped in solving projects like the Guggenheim in Bilbao, the leaning Tower of Pisa in Italy, and the Millennium Bridge in London. Similarly, the method discussed in this paper will aid in solving physical production problems with complex building forms. References Bentley, P.J. (Ed.). Evolutionary Design by Computers. Morgan Kaufman Publishers Inc. San Francisco, CA, 1-73 Celani, G, (2004) “From simple to complex: using AutoCAD to build generative design systems” in: L. Caldas and J. Duarte (org.) Implementations issues in generative design systems. First Intl. Conference on Design Computing and Cognition, July 2004 Dodgson M, Gann D.M., Salter A, (2004), “Impact of Innovation Technology on Engineering Problem Solving: Lessons from High Profile Public Projects,” Industrial Dynamics, Innovation and Development, 2004 Dristas, (2004) “Design Operators.” Thesis. Massachusetts Institute of Technology, Cambridge, MA, 2004 Friedman, M, (2002), Gehry Talks: Architecture + Practice, Universe Publishing, New York, NY, 2002 Kolarevic, B, (2003), Architecture in the Digital Age: Design and Manufacturing, Spon Press, London, UK, 2003 Opas J, Bochnick H, Tuomi J, (1994), “Manufacturability Analysis as a Part of CAD/CAM Integration”, Intelligent Systems in Design and Manufacturing, 261-292 Rudolph S, Alber R, (2002), “An Evolutionary Approach to the Inverse Problem in Rule-Based Design Representations”, Artificial Intelligence in Design ’02, 329-350 Rich M, (1989), Digital Mockup, American Institute of Aeronautics and Astronautics, Reston, VA, 1989 Schön, D., The Reflective Practitioner: How Professional Think in Action. Basic Books. 1983 Shelden, D, (2003), “Digital Surface Representation and the Constructability of Gehry’s Architecture.” Diss. Massachusetts Institute of Technology, Cambridge, MA, 2003 Smithers T, Conkie A, Doheny J, Logan B, Millington K, (1989), “Design as Intelligent Behaviour: An AI in Design Thesis Programme”, Artificial Intelligence in Design, 293-334 Smithers T, (2002), “Synthesis in Designing”, Artificial Intelligence in Design ’02, 3-24 Stiny, G, (1977), “Ice-ray: a note on the generation of Chinese lattice designs” Environmental and Planning B, volume 4, pp. 89-98
keywords	Digital fabrication; bilateral contouring; integral connection; complex-curve
series	SIGRADI
email
last changed	2016/03/10 09:52

_id	205caadria2004
id	205caadria2004
authors	Guan-Ye Mivo Chen
year	2004
title	What Is Intention Structure? - Represent Invisible Information of Spatial Depicts
source	CAADRIA 2004 [Proceedings of the 9th International Conference on Computer Aided Architectural Design Research in Asia / ISBN 89-7141-648-3] Seoul Korea 28-30 April 2004, pp. 275-286
doi	https://doi.org/10.52842/conf.caadria.2004.275
summary	The significant problem of this paper is how we convey spatial information to represent concrete meaning of mental imagery. For replying the above problem, we are developing a spatial information structure called "Intention Structure". Intention structure is used to represent some spatial experience of a particular person and awareness of the aura into some spatial depicts at that physical place. The meaning of “intention” is implied into a sequential relation when a navigator moves and gazes something in a place. This sequential relation can be described into two ways of spatial representation: one is the action of human body including “moving the body” and “moving the head”; another is converting the visual information into spatial memories through the behavior of gaze, including “the sight focus” and “the snapshot glance”. Otherwise, we also consider the limitation of topology at that physical place. Based on the above ideas, we use XML technologies in Java language to represent spatial data of intention structure for the describable usages of invisible information. we implemented this idea on a project of spatial analysis with Taiwanese traditional garden, the Lin family garden in Banciao, Taipei County, Taiwan.
series	CAADRIA
email
last changed	2022/06/07 07:51

_id	2004_500
id	2004_500
authors	Hanzl, Malgorzata and Wrona, Stefan
year	2004
title	Visual Simulation as a Tool for Planning Education - Computer Aided Participation Support
source	Architecture in the Network Society [22nd eCAADe Conference Proceedings / ISBN 0-9541183-2-4] Copenhagen (Denmark) 15-18 September 2004, pp. 500-507
doi	https://doi.org/10.52842/conf.ecaade.2004.500
summary	Contemporary computer techniques offer many new opportunities to engage citizens into the planning process. There are new possibilities of interaction, introducing an observer into the “game”. The research project presented in the paper assumes the use of a visual 3D language which consists of a series of schematic types of buildings. They form a language which is easy to understand both by professionals and by laymen. Understanding is the very first step towards getting convinced by the ideas presented. The next step is interaction - the user’s action induces the response of the system. The solution proposed by the user meets an evaluation from the part of the system which evokes the user’s interest - in the case presented here the evaluation introduces the simulation of future state of the site. The problem posed is to find out the best way to convince people that some places are less or more suitable for settlement, depending on the media present there, distance from the urban areas and the environment protection. The attempt to create a tool which could be helpful in an educational process is described in the paper. The idea is to prepare a form of a master plan record which uses the visual 3D language and may be accessed via World Wide Web pages. The paper formulates the assessments for the software described above and examines the possibility to create an application. The trial to prepare a web based service using the flash and shockwave technology is presented.
series	eCAADe
email
last changed	2022/06/07 07:49

_id	avocaad_2003_21
id	avocaad_2003_21
authors	Jaroslaw Szewczyk
year	2003
title	Technology and Local Values; Computer – Aided Acting with Regional Heritage
source	LOCAL VALUES in a NETWORKED DESIGN WORLD - ADDED VALUE OF COMPUTER AIDED ARCHITECTURAL DESIGN, Stellingwerff, Martijn and Verbeke, Johan (Eds.), (2004) DUP Science - Delft University Press, ISBN 90-407-2507-1.
summary	The problems of storage of local cultural heritage in digital databases, are reported in the paper. An exemplar case of RuralXML framework is presented. Three main groups of challenges relating to “culturally rich” databases are recognised:1. Estimation of the significance of digital databases for supporting design process, educational needs and scientific investigations;2. The conceptual problems with digital representation of “the paper heritage”3. The technical problems related to the architectural databases.The most important aspects of the problem are mentioned, as a background to a discussion about the reciprocal dependencies between technology and local values, i.e. how technology supports acting with the local architectural heritage, and how “cultural significance” values technology. We claim that digital technology not only enables storage and management of such data, but it also adds a new dimension to the design, making it “locally-sensitive” and oriented towards context by means of employing digitally archived architectural data. The accessibility to information about the “local” architecture heritage is important for local as well as global design. The premises for such statements, are presented.
keywords	Architecture, Local values, Globalisation, Computer Aided Architectural Design
series	AVOCAAD
email
last changed	2006/01/16 21:38

For more results click below: