Cumincad : CUMINCAD Papers : Search Results

CumInCAD is a Cumulative Index about publications in Computer Aided Architectural Design
supported by the sibling associations ACADIA, CAADRIA, eCAADe, SIGraDi, ASCAAD and CAAD futures

PDF papers
References

Hits 1 to 20 of 572

Reformat results as: short short into frame detailed detailed into frame

_id	avocaad_2003_10
id	avocaad_2003_10
authors	Sevil Sariyildiz, Ozer Ciftcioglu, Bige Tunçer and Rudi Stouffs
year	2003
title	Knowledge Model for Cultural Analogy in Design and Design Education
source	LOCAL VALUES in a NETWORKED DESIGN WORLD - ADDED VALUE OF COMPUTER AIDED ARCHITECTURAL DESIGN, Stellingwerff, Martijn and Verbeke, Johan (Eds.), (2004) DUP Science - Delft University Press, ISBN 90-407-2507-1.
summary	Almost every architect uses analogy while designing. The source of inspiration is nature, technology, geometry, etc., besides the influence of the work of other architects. Analogy in architecture has a close relationship with culture as well. Culture is a dynamic occurrence and evolves by the influence of many aspects such as technological, economical, environmental and social. In the process of design, architects built op knowledge from their own experience and designs, but also from the other designers work. Usually, architects develop this quality and ability during the education, and later by trial and error methodwhile practising the design. This is habitually done based on own conscience, intuition and experience.The developments in ICKT (Information, Communication and Knowledge Technology) as a part of broader technological developments and the ongoing globalisation, influences the culture as a dynamic process and therefore the architecture.. It is necessary to make these influences explicit for their embedding in architectural design education of young professionals. This can be achieved by transferring the resulting knowledge to a knowledge model by using intelligent modelling techniques. The operational aspects of design analogies to be implemented in education, research and the daily practice of designing architects need attention. This paper discusses the operational aspects of cultural analogy in design by using an intelligent computational modelling approach.
keywords	Architecture, Local values, Globalisation, Computer Aided Architectural Design, ICKT, Architectural Design, Analogy, Culture, Design Education, Multiculturalism, Intelligent Modelling Techniques
series	AVOCAAD
email
last changed	2006/01/16 21:38

_id	2004_312
id	2004_312
authors	Burry, J., Felicetti, P., Tang, J., Burry, M. and Xie, M.
year	2004
title	Dynamical Structural Modeling - A Collaborative Design Exploration
source	Architecture in the Network Society [22nd eCAADe Conference Proceedings / ISBN 0-9541183-2-4] Copenhagen (Denmark) 15-18 September 2004, pp. 312-317
doi	https://doi.org/10.52842/conf.ecaade.2004.312
summary	This paper will report on a generative performative modeling approach that engages architects and structural engineers in close dialog. We focus on knowledge shared between architects and engineers to apply the Finite Element Analysis based structural design technique Evolutionary Structural Optimization [ESO] as a way to understand or corroborate the performance factors that are significant in determining architectural form. ESO is very close conceptually to the dynamical system of matter and forces of growth itself. It has parallels both mathematical and metaphorical with natural evolution and morphogenesis so it has been poignant to apply the approach to a formal architectural case study in which the generative influence of these processes is inherent.
keywords	Evolutionary Structural Optimization; Finite Element Analysis; Architect Engineer Collaboration; Performance-Based Design; Form Finding
series	eCAADe
last changed	2022/06/07 07:54

_id	2004_426
id	2004_426
authors	Carrara, Gianfranco and Fioravanti, Antonio
year	2004
title	How to Construct an Audience in Collaborative Design - The Relationship Among which Actors in the Design Process
source	Architecture in the Network Society [22nd eCAADe Conference Proceedings / ISBN 0-9541183-2-4] Copenhagen (Denmark) 15-18 September 2004, pp. 426-434
doi	https://doi.org/10.52842/conf.ecaade.2004.426
summary	The features of complexity in architectural design have now been clarified. Complexity, intrinsic in architectural work, has increased in recent years as in all other fields of human endeavour – social, economic and cultural. In the specific case of architectural design, the most significant factors in this regard consist of the large number of actors, the numerous disciplines involved, technological innovation, regulations and rules governing the design process and the various different design aims. In order to address this complex of problems, long-term research based on the Collaborative Design paradigm, CD, is now being carried out. In it, thanks to the reciprocal exchange of information, the complementary nature of the knowledge possessed by the various actors, and the contemporary nature of the design action by the various actors on the same components, positive effects are exerted on the design as a whole. The latter thus gains in coherence and in improved integration among the design solutions proposed by the various actors. In CD all the actors are involved from the outset of the design work and are helped by distributed Knowledge Bases (KBs) and Intelligent Assistants (IAs). In this case it may happen that information and knowledge automatically exchanged among KBs (through the IAs) are excessive and/or not addressed to the right actors. How can information redundancy be avoided, and how can the flow of information sent over the network be controlled? The present paper introduces and defines the concept of „Audience“, that is, the group of actors to which it is permitted to send information concerning non respected requirements and the „reduced Audience“ to which to send the knowledge needed to overcome the difficulties encountered.
keywords	Collaborative Architectural Design, Complexity, Intelligent Assistant, Context, Audience
series	eCAADe
last changed	2022/06/07 07:55

_id	sigradi2006_e028c
id	sigradi2006_e028c
authors	Griffith, Kenfield; Sass, Larry and Michaud, Dennis
year	2006
title	A strategy for complex-curved building design:Design structure with Bi-lateral contouring as integrally connected ribs
source	SIGraDi 2006 - [Proceedings of the 10th Iberoamerican Congress of Digital Graphics] Santiago de Chile - Chile 21-23 November 2006, pp. 465-469
summary	Shapes in designs created by architects such as Gehry Partners (Shelden, 2002), Foster and Partners, and Kohn Peterson and Fox rely on computational processes for rationalizing complex geometry for building construction. Rationalization is the reduction of a complete geometric shape into discrete components. Unfortunately, for many architects the rationalization is limited reducing solid models to surfaces or data on spread sheets for contractors to follow. Rationalized models produced by the firms listed above do not offer strategies for construction or digital fabrication. For the physical production of CAD description an alternative to the rationalized description is needed. This paper examines the coupling of digital rationalization and digital fabrication with physical mockups (Rich, 1989). Our aim is to explore complex relationships found in early and mid stage design phases when digital fabrication is used to produce design outcomes. Results of our investigation will aid architects and engineers in addressing the complications found in the translation of design models embedded with precision to constructible geometries. We present an algorithmically based approach to design rationalization that supports physical production as well as surface production of desktop models. Our approach is an alternative to conventional rapid prototyping that builds objects by assembly of laterally sliced contours from a solid model. We explored an improved product description for rapid manufacture as bilateral contouring for structure and panelling for strength (Kolarevic, 2003). Infrastructure typically found within aerospace, automotive, and shipbuilding industries, bilateral contouring is an organized matrix of horizontal and vertical interlocking ribs evenly distributed along a surface. These structures are monocoque and semi-monocoque assemblies composed of structural ribs and skinning attached by rivets and adhesives. Alternative, bi-lateral contouring discussed is an interlocking matrix of plywood strips having integral joinery for assembly. Unlike traditional methods of building representations through malleable materials for creating tangible objects (Friedman, 2002), this approach constructs with the implication for building life-size solutions. Three algorithms are presented as examples of rationalized design production with physical results. The first algorithm [Figure 1] deconstructs an initial 2D curved form into ribbed slices to be assembled through integral connections constructed as part of the rib solution. The second algorithm [Figure 2] deconstructs curved forms of greater complexity. The algorithm walks along the surface extracting surface information along horizontal and vertical axes saving surface information resulting in a ribbed structure of slight double curvature. The final algorithm [Figure 3] is expressed as plug-in software for Rhino that deconstructs a design to components for assembly as rib structures. The plug-in also translates geometries to a flatten position for 2D fabrication. The software demonstrates the full scope of the research exploration. Studies published by Dodgson argued that innovation technology (IvT) (Dodgson, Gann, Salter, 2004) helped in solving projects like the Guggenheim in Bilbao, the leaning Tower of Pisa in Italy, and the Millennium Bridge in London. Similarly, the method discussed in this paper will aid in solving physical production problems with complex building forms. References Bentley, P.J. (Ed.). Evolutionary Design by Computers. Morgan Kaufman Publishers Inc. San Francisco, CA, 1-73 Celani, G, (2004) “From simple to complex: using AutoCAD to build generative design systems” in: L. Caldas and J. Duarte (org.) Implementations issues in generative design systems. First Intl. Conference on Design Computing and Cognition, July 2004 Dodgson M, Gann D.M., Salter A, (2004), “Impact of Innovation Technology on Engineering Problem Solving: Lessons from High Profile Public Projects,” Industrial Dynamics, Innovation and Development, 2004 Dristas, (2004) “Design Operators.” Thesis. Massachusetts Institute of Technology, Cambridge, MA, 2004 Friedman, M, (2002), Gehry Talks: Architecture + Practice, Universe Publishing, New York, NY, 2002 Kolarevic, B, (2003), Architecture in the Digital Age: Design and Manufacturing, Spon Press, London, UK, 2003 Opas J, Bochnick H, Tuomi J, (1994), “Manufacturability Analysis as a Part of CAD/CAM Integration”, Intelligent Systems in Design and Manufacturing, 261-292 Rudolph S, Alber R, (2002), “An Evolutionary Approach to the Inverse Problem in Rule-Based Design Representations”, Artificial Intelligence in Design ’02, 329-350 Rich M, (1989), Digital Mockup, American Institute of Aeronautics and Astronautics, Reston, VA, 1989 Schön, D., The Reflective Practitioner: How Professional Think in Action. Basic Books. 1983 Shelden, D, (2003), “Digital Surface Representation and the Constructability of Gehry’s Architecture.” Diss. Massachusetts Institute of Technology, Cambridge, MA, 2003 Smithers T, Conkie A, Doheny J, Logan B, Millington K, (1989), “Design as Intelligent Behaviour: An AI in Design Thesis Programme”, Artificial Intelligence in Design, 293-334 Smithers T, (2002), “Synthesis in Designing”, Artificial Intelligence in Design ’02, 3-24 Stiny, G, (1977), “Ice-ray: a note on the generation of Chinese lattice designs” Environmental and Planning B, volume 4, pp. 89-98
keywords	Digital fabrication; bilateral contouring; integral connection; complex-curve
series	SIGRADI
email
last changed	2016/03/10 09:52

_id	avocaad_2003_18
id	avocaad_2003_18
authors	Henri Achten, Jos van Leeuwen and Sverker Fridqvist
year	2003
title	Communicating Concepts for Shared Understanding: A Multi-Agent Approach
source	LOCAL VALUES in a NETWORKED DESIGN WORLD - ADDED VALUE OF COMPUTER AIDED ARCHITECTURAL DESIGN, Stellingwerff, Martijn and Verbeke, Johan (Eds.), (2004) DUP Science - Delft University Press, ISBN 90-407-2507-1.
summary	Capturing and sharing design concepts is necessary if we want to support the design process by means of Information & Communication Technology (ICT). Standardized concepts are important for support at the end of the design process when designs need to conform to set standards and norms, and in order to enable communication, but are less useful in the early design stages. We propose an approach that takes into account a more developmental attitude that will be better suited for design support and the sharing of design concepts. In this approach, design concepts are formalised by means of a technology called concept modelling. Capturing and exchange of concepts are based on a multi-agent approach. The whole of concepts that are used in a domain or for a design task can be considered a design ontology. In this paper we outline the motivations for the research, outline the basic approach in the research work, and identify the major challenges and research problems that need to be tackled.
keywords	Architecture, Local values, Globalisation, Computer Aided Architectural Design
series	AVOCAAD
email
last changed	2006/01/16 21:38

_id	ijac20032109
id	ijac20032109
authors	Lang, Silke
year	2004
title	Interactive Spaces for Advanced Communication using 3D Video
source	International Journal of Architectural Computing vol. 2 - no. 1
summary	Architects integrate more and more modern information technologies in their projects. Based on this background the use of 3D video in an architectural context is discussed. The combination of real-time 3D video and blue-c technology for a distributed shopping experience in shared virtual shops is described. IN: SHOP illustrates an approach to enhance physical environments in shopping areas and connects geographically distant persons. These technologies offer new architectural design possibilities. The traditional understanding of location, space, and time may be redefined. Interactive spaces are being designed, modified and experienced. We believe that information technologies have an impact on buildings and architecture.
series	journal
email
more	http://www.multi-science.co.uk/ijac.htm
last changed	2007/03/04 07:08

_id	103caadria2004
id	103caadria2004
authors	Martens, B., Jabi, W., Cerovsek, T. and Penttilä, H.
year	2004
title	Web-Based Platforms for Collaborative Submission and Review of Shared Information
source	CAADRIA 2004 [Proceedings of the 9th International Conference on Computer Aided Architectural Design Research in Asia / ISBN 89-7141-648-3] Seoul Korea 28-30 April 2004, pp. 49-63
doi	https://doi.org/10.52842/conf.caadria.2004.049
summary	The focus of this paper is the implementation of web-based data platforms for CAAD research and education. This review is based on three case studies that use different software environments for the creation of the specified data platforms: eCAADe/FileMakerdatabases, ACADIA/CAMEO-WebObjects environment and SciX/WODA-language.
series	CAADRIA
email
last changed	2022/06/07 07:59

_id	208caadria2004
id	208caadria2004
authors	Paul Murty and Terry Purcell
year	2004
title	Discoveries Throughout Conceptual Design
source	CAADRIA 2004 [Proceedings of the 9th International Conference on Computer Aided Architectural Design Research in Asia / ISBN 89-7141-648-3] Seoul Korea 28-30 April 2004, pp. 319-334
doi	https://doi.org/10.52842/conf.caadria.2004.319
summary	This paper describes current progress of an interview study of architects which considers how these individuals design, focusing on breakthroughs and unexpected discoveries made throughout conceptual design. The study considers creative outcomes that occur while these individuals are not intentionally designing, as well as when they are, with the intention of identifying and evaluating evidence of latent creative activity. While not described in this paper, issues of insightfulness, based on a Gestalt perspective, are also considered in the study. The completed interviews described in the paper suggest that, in order to achieve breakthroughs, designers adopt distinctive methods of disengaging from currently unproductive designing. These may be categorized by degree and type of disengagement, or subsequent re-engagement. In general, disengaging, instead of persisting in designing, when apparently stuck, appears to be the rule rather than the exception. Statements by the interviewees suggest that discoveries during, or just after, times when they are not actively designing, referred to as cold discoveries, are more important than is currently recognized, which is scarcely at all. Statements describing interviewee experiences of discovery and providing indications of the genesis of discoveries are included in the paper. The paper discusses implications of the wide range of perceptions and experiences of each individual. One interesting finding is that individuals appear to experience and appreciate cold discoveries regardless of differences in key aspects of the way they design, described in the paper. This suggests that the genesis of cold discoveries may be as complex as that of discoveries in general.
series	CAADRIA
email
last changed	2022/06/07 07:59

_id	106caadria2004
id	106caadria2004
authors	Yoke-Chin Lai
year	2004
title	Contribution of Semantic Web to Collaborative Design
source	CAADRIA 2004 [Proceedings of the 9th International Conference on Computer Aided Architectural Design Research in Asia / ISBN 89-7141-648-3] Seoul Korea 28-30 April 2004, pp. 91-106
doi	https://doi.org/10.52842/conf.caadria.2004.091
summary	This paper focuses on a lightweight ontology-based knowledge management system, which is a prototype that aims at enhancing the collaborative activities in the early building design phase. Technologies with respect to de facto standards proposed by industry group W3C are implemented to develop this knowledge management system. Resource Description Framework (RDF) associated with its Schema (RDFS) is selected as the ontology language used in the system. RDF(S) with its embedded reasoning techniques provides a rich set of constructs to facilitate the generation of ontologies so that the annotated information can be machine readable. Approaches of how the domain knowledge is represented in RDF(S)-based ontology, is shared and retrieved among stakeholders of building project will be described and illustrated in the paper. A proposition with respect to the contribution of this prototype system to collaborative activities undertaken in the early building design phase will also be discussed in the paper.
series	CAADRIA
email
last changed	2022/06/07 07:57

_id	2004_500
id	2004_500
authors	Hanzl, Malgorzata and Wrona, Stefan
year	2004
title	Visual Simulation as a Tool for Planning Education - Computer Aided Participation Support
source	Architecture in the Network Society [22nd eCAADe Conference Proceedings / ISBN 0-9541183-2-4] Copenhagen (Denmark) 15-18 September 2004, pp. 500-507
doi	https://doi.org/10.52842/conf.ecaade.2004.500
summary	Contemporary computer techniques offer many new opportunities to engage citizens into the planning process. There are new possibilities of interaction, introducing an observer into the “game”. The research project presented in the paper assumes the use of a visual 3D language which consists of a series of schematic types of buildings. They form a language which is easy to understand both by professionals and by laymen. Understanding is the very first step towards getting convinced by the ideas presented. The next step is interaction - the user’s action induces the response of the system. The solution proposed by the user meets an evaluation from the part of the system which evokes the user’s interest - in the case presented here the evaluation introduces the simulation of future state of the site. The problem posed is to find out the best way to convince people that some places are less or more suitable for settlement, depending on the media present there, distance from the urban areas and the environment protection. The attempt to create a tool which could be helpful in an educational process is described in the paper. The idea is to prepare a form of a master plan record which uses the visual 3D language and may be accessed via World Wide Web pages. The paper formulates the assessments for the software described above and examines the possibility to create an application. The trial to prepare a web based service using the flash and shockwave technology is presented.
series	eCAADe
email
last changed	2022/06/07 07:49

_id	107caadria2004
id	107caadria2004
authors	Monchai Bunyavipakul, Raktum Sallakachat and Ekasidh Charoensilp
year	2004
title	Integrating 3D Game Engine to Online Interactive Presentation for Collaborative Design Work On Pda - Collaborative Works Anytime, Anywhere
source	CAADRIA 2004 [Proceedings of the 9th International Conference on Computer Aided Architectural Design Research in Asia / ISBN 89-7141-648-3] Seoul Korea 28-30 April 2004, pp. 107-116
doi	https://doi.org/10.52842/conf.caadria.2004.107
summary	In this research, Quake Engine on PDA (Pocket Quake) is modified and developed to make an appropriate environment for collaborative design work in the representation phase for the architectural design teams. The system is being designed for working in the centralized environment by using central server, such as when the designing team has changed 3D Model Information and uploaded to the server then the PDA client will change the same 3D Model automatically. Game Engine will be used to develop this presentation’s tool by designing new user interface and functions for working in PDA. The trial project, The Victory Monument’s Area Development Project, will make the Online Interactive Presentation by using 3D Game Engine on PDA to reconstruct around The Victory Monument in Bangkok. Hopefully, this will make the Virtual World Online anywhere, anytime being more available and give the comparison between the site existing and the new architectural form which designed on the site for good understanding about what the design answers.
series	CAADRIA
email
last changed	2022/06/07 07:58

_id	ascaad2004_paper5
id	ascaad2004_paper5
authors	Abdelhameed, Wael A.
year	2004
title	A Java Program Model for Design-Idea Exploration in Three Dimensions
source	eDesign in Architecture: ASCAAD's First International Conference on Computer Aided Architectural Design, 7-9 December 2004, KFUPM, Saudi Arabia
summary	Visual Perception of depictions is the basis of the act of imagining employed in visual design thinking of design process, and consequently in design-idea exploration. Digital-media use plays a significantly important role in these exploration processes. The underlying assumption of the research is that Visual Perception affects Design-Idea Exploration processes. The research investigates and sheds more light on the processes of Visual Perception, which architects use in mass exploration of design ideas. The research is a part of a series that presents a Java program based on creating 3d shapes, in order for architects to explore initial shapes related to design ideas. The initial version of the program, which is a part of another research, creates 3d shapes through controlling their dimensions and insertion point. Functions of painting, controlling the light position, and shading are added to the program that is presented in this research. The research discusses Design-Idea Exploration and Visual Perception and their correlation. The added features of the program that is used as a design medium are also presented and linked to the investigated areas.
series	ASCAAD
email
last changed	2007/04/08 19:47

_id	sigradi2004_349
id	sigradi2004_349
authors	Adriana Simeone; Roberto Segre; José Ripper Kós
year	2004
title	O processo de desenvolvimento da ferramenta cidade interativa [The Developmental Process of an Interactive City Tool]
source	SIGraDi 2004 - [Proceedings of the 8th Iberoamerican Congress of Digital Graphics] Porte Alegre - Brasil 10-12 november 2004
summary	This paper exposes site .Cidade Interativa. development process, based on: a reflection about importance of users. points of view.s incorporation for space remodelling; a study about theoretical and practical experiences which, in different ways, approached potencialities of participation of a community.s members in a project; and, finally, a investigation of propagation alternatives of individual readings as information source for urban project, trying to enhance points of view that generally remain occult in the form of invisible practices of anonymous users. This site must be understood as concretion of an idea: creating a vehicle from which is possible to become individual readings public, so that these are shared and, also, make them available to people responsible for urban projects as information source.
series	SIGRADI
email
last changed	2016/03/10 09:47

_id	ascaad2004_paper4
id	ascaad2004_paper4
authors	Ahmad, Sumbul and Scott C. Chase
year	2004
title	Design Generation of the Central Asian Caravanserai
source	eDesign in Architecture: ASCAAD's First International Conference on Computer Aided Architectural Design, 7-9 December 2004, KFUPM, Saudi Arabia
summary	Challenges for the study of Islamic architecture include its abundance and diversity in expression and its classification based on distinct functional or stylistic types. We address these issues by presenting shape grammars as a methodology for the analysis and design generation of Islamic architecture, with a specific example in the form of a parametric shape grammar for central Asian caravanserais. The grammar is developed by identifying distinct design types. Shape rules are created based on a study of the spatial elements and their organisation in the designs. We illustrate the utility of the grammar by deriving an extant design and as well as, previously unknown designs. We conclude by discussing possible extensions to the current grammar and future work involving the development of a grammar based framework for the comparative analysis of medieval Islamic courtyard buildings.
series	ASCAAD
email
last changed	2007/04/08 19:47

_id	ddss2004_ra-19
id	ddss2004_ra-19
authors	Akamine, A. and A. Nélson Rodrigues da Silva
year	2004
title	An Evaluation of Neural Spatial Interaction Models Based on a Practical Application
source	Van Leeuwen, J.P. and H.J.P. Timmermans (eds.) Recent Advances in Design & Decision Support Systems in Architecture and Urban Planning, Dordrecht: Kluwer Academic Publishers, ISBN: 1-4020-2408-8, p. 19-32
summary	One of the serious problems faced by the Brazilian municipalities is the scarcity of resources for building education infrastructure. This asks for an optimal allocation of the available resources that includes, among other things, a rational spatial arrangement of the supply points (i.e., schools) in order to increase the demand coverage (i.e., students). If it is possible to foresee the regions where the demand is going to be concentrated, it is then possible to plan the location of new facilities and to assess the impact on the future level of service of the entire system. Considering that one of the consequences of the location-allocation process is the distribution of trips from demand points to supply points throughout the city, therefore affecting the overall intraurban accessibility conditions to essential services such as education, there is a strong need of models that planners can rely on to predict the future trip distribution patterns. As a result, the objective of this work was to evaluate the performance of Artificial Neural Networks (ANN) when applied to spatial interaction models, the so-called Neural Spatial Interaction Models. This was done in a practical context, in contrast to the more theoretical works commonly found in literature. The practical application showed that the neural spatial interaction model had different performances when compared to the traditional gravity models. In one case the neural models outperformed the gravity models, while on the other case it was just the opposite. The explanation for this may be in the data or in the ANN model formulation, as discussed in the conclusions.
keywords	Artificial Neural Networks, Spatial Interaction Models, Education Infrastructure
series	DDSS
last changed	2004/07/03 22:13

_id	sigradi2004_353
id	sigradi2004_353
authors	Alice Theresinha Cybis Pereira; Berenice Santos Gonçalves
year	2004
title	O ambiente virtual de aprendizagem em arquitetura e design da UFSC - Do projeto à realidade [The Virtual Learning Environment in Architecture and Design at UFSC – From Project to Reality]
source	SIGraDi 2004 - [Proceedings of the 8th Iberoamerican Congress of Digital Graphics] Porte Alegre - Brasil 10-12 november 2004
summary	This article presents the theoretical basis and the structure that supports the virtual learning process on a collaborative environment for Architecture and Design: VLE-AD. The virtual environment is modelled based on the presuppositions of the Problems Based Learning (PBL) and on the distance collaboration based with the fundamentals of constructivism and socio-interacionism. A specific environment for problems resolution is offered together with syncronic and assyncronic communication tools. The site is structured with learning activities in several modalities: contents, exercises and problems. The evaluation was preformed with the on-line course .Color applied in Graphical Design..The results has proven to be very positive for design and architecture distant learning in applying the tripod: Communication and Information Technology, Theoretical contents and Problems. The online participation and the resolution steps of the problems has been highlighted as a main factor to improve learning and avoid the ghost of loneliness pointed by students from some distant learning courses and responsible for the high number of abandonment.
series	SIGRADI
email
last changed	2016/03/10 09:47

_id	sigradi2004_333
id	sigradi2004_333
authors	Andrés S. Rodríguez
year	2004
title	Exploración de relaciones entre analogías y bocetos durante la generación de ideas en diseño industrial como elicitación de requerimientos para CAD [Exploration of Relations between Analogies and Sketches During the Generation of Ideas in Industrial Design for Eliciting CAD Requirements]
source	SIGraDi 2004 - [Proceedings of the 8th Iberoamerican Congress of Digital Graphics] Porte Alegre - Brasil 10-12 november 2004
summary	An exploration on the analogy-based idea generation process in industrial design is reported. In particular we try to identify relationships between the sketching process and the analogy building in order to elicit requirements for a supporting software. We use concurrent think aloud protocols to obtain experimental data and an extension of a proved content oriented schema to analyze them. Statistical analysis on segments containing .analogical chains. found relations between analogical and design actions that allow us to support the hypothesis that the sketch seems to be more useful for helping the analytical aspects of the analogical making (i.e. to code a situation in terms of higher order relations) than the synthetic ones (i.e. to identify an analogy source). Results were interpreted as software requirements for a Computer Aided Design Application.
keywords	Sketching, Analogy, CAD, Industrial design, Protocol analysis
series	SIGRADI
email
last changed	2016/03/10 09:47

_id	avocaad_2003_17
id	avocaad_2003_17
authors	Anna Maria Chrabin, Jaroslaw Szewczyk and Herman Neuckermans
year	2003
title	A Critical Evaluation of Early Stages Software in its Capacity of Coping with Contextual Issues
source	LOCAL VALUES in a NETWORKED DESIGN WORLD - ADDED VALUE OF COMPUTER AIDED ARCHITECTURAL DESIGN, Stellingwerff, Martijn and Verbeke, Johan (Eds.), (2004) DUP Science - Delft University Press, ISBN 90-407-2507-1.
summary	In this paper we analyse critically early design stages software in its capacity of coping with contextual data at large (i.e. representing cultural, aesthetical context, etc.). We identified 5 categories of early stages software: geometry based graphic editors, evaluation architectural software, generative and shape-grammar based systems, evolutionary systems and other systems. Calling the object under creation during of the early stages a CAD conceptual model, we will investigate to what extend this software allows the architect to experience and represent the context in which a design is situated. Especially we will focus on its capacity to allow interaction, playful interaction on our way to the design. Designers, and particularly architects, interact with the local context similarly to interacting in a game: the context influences the users’ decisions, surprises them and causes permanent changes to their ways of thinking. On the other hand, architects permanently shape and reshape the context, and reduce the context to a protean point of reference. Such behaviour characterises creative thinking that is crucial for the early stage of design. The investigation led us to the conclusions that the effective interactivity with the context needs simple rules, a plain interface and data reduced as simple as possible, especially when interaction with the context is performed during the early stages of a design process. The findings can be used in organising computer environments for early-stage design.
keywords	Architecture, Local values, Globalisation, Computer Aided Architectural Design
series	AVOCAAD
email
last changed	2006/01/16 21:38

_id	2004_350
id	2004_350
authors	Asanowicz, Alexander
year	2004
title	Computer, Creativity and Unpredictability
source	Architecture in the Network Society [22nd eCAADe Conference Proceedings / ISBN 0-9541183-2-4] Copenhagen (Denmark) 15-18 September 2004, pp. 350-357
doi	https://doi.org/10.52842/conf.ecaade.2004.350
summary	Computers in designing are usually considered as a tool for preparing technical documentation, storage and managing information, coordinating of flow of design process, modelling and all kind of visualisations (renderings, animation, VR models). At the early design stages, when an idea of the form is created, computer is not used very often. The reason for this is that traditional computer drawing is too completed to be used at this stage. In new methods of supporting creativity, computer should be used for creation of less precise, unpredictable but more inspiring images. This method are based on the thesis that emotional elements have a great affect on the decision making process in designing. Intuition, unpredictability and no logic are the essence of creativity in the selection of associations. Confirmation of this statement we may find in many theories of creativity (theory of incubation elaborated by Wallas, genploration (Finke, Ward and Smith), redundant generation (Lem), synectics (Gordon)). All these theories emphasize the role of unpredictable associations and metaphors in creativity. Process of metaphorisation is characteristic for our era and plays important role in creative process. That’s why we need the new methods of graphic computer and non-computer transformation, which allows us a fuller exploration of design metaphors. The final conclusion is built on the thesis that too precise tools promote cause to decrease differences.
keywords	Creativity; Design Theory; Metaphors
series	eCAADe
email
last changed	2022/06/07 07:54

_id	ddss2004_ra-177
id	ddss2004_ra-177
authors	Ballas, D., R. Kingston, and J. Stillwell
year	2004
title	Using a Spatial Microsimulation Decision Support System for Policy Scenario Analysis
source	Van Leeuwen, J.P. and H.J.P. Timmermans (eds.) Recent Advances in Design & Decision Support Systems in Architecture and Urban Planning, Dordrecht: Kluwer Academic Publishers, ISBN: 1-4020-2408-8, p. 177-191
summary	This paper discusses the potential of a spatial microsimulation-based decision support system for policy analysis. The system can be used to describe current conditions and issues in neighbourhoods, predict future trends in the composition and health of neighbourhoods and conduct modelling and predictive analysis to measure the likely impact of policy interventions at the local level. A large dynamic spatial micro-simulation model is being constructed for the population of Leeds (approximately 715,000 individuals) based on spatial microsimulation techniques in conjunction with a range of data, including 2001 Census data for Output Areas and sample data from the British Household Panel Survey. The project has three main aims as follows: (i) to develop a static microsimulation model to describe current conditions in Leeds; (ii) to enable the performance of ‘What if?’ analysis on a range of policy scenarios; and (iii) to develop a dynamic microsimulation model to predict future conditions in Leeds under different policy scenarios. The paper reports progress in meeting the above aims and outlines the associated difficulties and data issues. One of the significant advantages of the spatial microsimulation approach adopted by this project is that it enables the user to query any combination of variables that is deemed desirable for policy analysis. The paper will illustrate the software tool being developed in the context of this project that is capable of carrying out queries of this type and of mapping their results. The decision support tool is being developed to support policy-makers concerned with urban regeneration and neighbourhood renewal.
keywords	Spatial Microsimulation, Spatial Decision Support Systems, Geotools
series	DDSS
last changed	2004/07/03 22:13

For more results click below: