Cumincad : CUMINCAD Papers : Search Results

CumInCAD is a Cumulative Index about publications in Computer Aided Architectural Design
supported by the sibling associations ACADIA, CAADRIA, eCAADe, SIGraDi, ASCAAD and CAAD futures

PDF papers
References

Hits 1 to 20 of 559

Reformat results as: short short into frame detailed detailed into frame

_id	2005_211
id	2005_211
authors	Carrara, Gianfranco and Fioravanti, Antonio
year	2005
title	The Quest for the Holy Grail – Holistic Collaborative Design
source	Digital Design: The Quest for New Paradigms [23nd eCAADe Conference Proceedings / ISBN 0-9541183-3-2] Lisbon (Portugal) 21-24 September 2005, pp. 211-218
doi	https://doi.org/10.52842/conf.ecaade.2005.211
summary	Architectural design, due to phenomena such as globalisation of the construction process, delocalisation of professional and industrial activities, spread of new construction materials and components, and the challenges of environmental sustainability, has become so comlex that traditional ways of managing the process are no longer sufficient. What is more, architectural works are required to be ever more performing and integrated - holistic. The paradigm of collaborative design is gaining ground as a way of dealing with these problems. Various process/ product models have been proposed over the years, making more or less use of advanced tools. In this field this study proposes a model in which operators from various cultural contexts are each supported by Intelligent Assistants (agents). The model simulates the design of works of architecture to the best professional practice. Exchange of information and knowledge between the operators is essential to enhance the design process. From this follows the need to interface not just data, but also meanings. This article shows how to improve communications between different applications, used by different operators, so as to integrate information and knowledge, whether formalised or not, in a project managed collaboratively by means of XML.
keywords	Collaborative Design; Design Process Model; Distributed Knowledge Bases; Semantic Interfaces; aecXML
series	eCAADe
email
last changed	2022/06/07 07:55

_id	caadria2005_b_5b_b
id	caadria2005_b_5b_b
authors	Dean Bruton, Arus Kunkhet
year	2005
title	Grammatical Design and Crowd Behaviour: A study of factors that influence human movement in urban spaces
source	CAADRIA 2005 [Proceedings of the 10th International Conference on Computer Aided Architectural Design Research in Asia / ISBN 89-7141-648-3] New Delhi (India) 28-30 April 2005, vol. 2, pp. 328-336
doi	https://doi.org/10.52842/conf.caadria.2005.328x.g4r
summary	Crowd behaviour in traffic and emergency situations has been recorded and documented since the early 1990s, often using digital representations of balls as an indicator of mass and movement. This paper reports the investigation of the factors that influence human movement in urban spaces and visualises the impact on human movements of changes to an urban design space. Using an agent-oriented approach is the common method for investigating the simulation of crowd behaviour. The relation of grammatical design to crowd behaviour is proposed as an important research area. This area developed since the technology for the advanced design visualisation of avatars or animated characters became available. The authors of the software used in Lord of the Rings and other well-known crowd movies have contributed to knowledge of the key issues in crowd behaviour in particular contexts and general situations. This paper relates experiments in teaching grammatical approaches to architectural design with digital media as a tool with three different implementations: a café, restaurant and gallery. Using a variety of design visualisation techniques gives different understandings of the use of a design space. By representing human movement in a design space in more complex visualisations we see more alternatives for better design more readily. Using notions of grammar, contingency and play to explore simple changes in design, the resulting crowd animations present an insightful early research stage experiment with the theories and models of crowd behaviour.
series	CAADRIA
email
last changed	2022/06/07 07:49

_id	cf2005_1_52_176
id	cf2005_1_52_176
authors	GU Ning and MAHER Mary Lou
year	2005
title	Dynamic Designs of 3D Virtual Worlds Using Generative Design Agents
source	Computer Aided Architectural Design Futures 2005 [Proceedings of the 11th International Conference on Computer Aided Architectural Design Futures / ISBN 1-4020-3460-1] Vienna (Austria) 20–22 June 2005, pp. 239-248
summary	3D virtual worlds are networked environments designed using the metaphor of architecture. Recent developments in 3D virtual worlds focus on interactivity, flexibility and adaptability. Rather than creating virtual environments in which the objects have intelligent behaviours, our research takes a different approach to develop an agent model that is associated with an individual person in the 3D virtual world as a personal design agent. This paper presents a Generative Design Agent (GDA), a kind of rational agent capable of representing a person in a virtual world and designing, implementing and demolishing 3D virtual places based on the occupants' current needs in the virtual world. The core of a GDA's design component is a generative design grammar that is able to capture a style of 3D virtual worlds. 3D virtual worlds designed using the GDA model is another kind of architecture for the "moment".
keywords	virtual environments, generative design, interactive design, shape grammars
series	CAAD Futures
email
last changed	2006/11/07 07:27

_id	2d39
id	2d39
authors	Heylighen A, Heylighen F, Bollen J, Casaer M
year	2005
title	A DISTRIBUTED MODEL FOR TACIT DESIGN KNOWLEDGE EXCHANGE
source	SID 2005, Proceedings of the 4th Social Intelligence Design Workshop, Stanford University, March 2005 (CD Rom)
summary	The distributed cognition approach, and by extension the domain of social intelligence design, attempts to integrate three until recently separate realms: mind, society, and matter. The field offers a heterogeneous collection of ideas, observations, and case studies, yet lacks a coherent theoretical framework for building models of concrete systems and processes. Despite the intrinsic complexity of integrating individual, social and technologically-supported intelligence, the paper proposes a relatively simple ‘connectionist’ framework for conceptualizing a distributed cognitive system. This framework represents shared information sources (documents) as nodes connected by links of variable strength, which increases interactively with the number of co-occurrences of documents in the patterns of their usage. This connectionist learning procedure captures and uses the implicit knowledge of its community of users to help them find relevant information, thus supporting an unconscious form of exchange. The principles are illustrated by an envisaged application to a concrete problem domain: the dynamic sharing of design knowledge among a multitude of architects through a database of associatively connected building projects.
keywords	connectionism, distributed cognition, tacit knowledge, architectural design
series	other
type	normal paper
email
last changed	2005/04/01 13:24

_id	acadia05_142
id	acadia05_142
authors	Lee, Jaewook and Kalay, Yehuda E.
year	2005
title	Collaborative Design Approach to Intelligent Environments
source	Smart Architecture: Integration of Digital and Building Technologies [Proceedings of the 2005 Annual Conference of the Association for Computer Aided Design In Architecture / ISBN 0-9772832-0-8] Savannah (Georgia) 13-16 October 2005, pp. 142-155
doi	https://doi.org/10.52842/conf.acadia.2005.142
summary	Intelligent environments are buildings and other settings that can recognize the changing needs of their users and/or the changing nature of their context, and respond to them by adjusting some key environmental parameters (temperature, light, sound, furnishings, etc.). Unlike the currently common approach, which is based on systems theory (i.e., adjusting the parameters of the environment to match some pre-defined use profile), the approach proposed in this paper is based on dynamic, collaborative design: it views the (built) environment as comprised of multiple independent object-agents, each of which is responsible for one small aspect of the environment. Each can sense the immediate changes pertaining to its domain of responsibility, and propose corrective measures, which are negotiated with other agents to form a collective response. The paper hypothesizes that such an approach can be made more context-sensitive and dynamic, is easily scaleable, and can respond to the needs of multiple different users of the environment at the same time. The paper presents the rationale for developing the multi-agent approach, its hypothetical implementation, and its application to hypothetical case studies.
series	ACADIA
email
last changed	2022/06/07 07:52

_id	cf2005_1_64_168
id	cf2005_1_64_168
authors	ACHTEN Henri
year	2005
title	Resolving some Ambiguities in Real-time Design Drawing Recognition by means of a Decision Tree for Agents
source	Computer Aided Architectural Design Futures 2005 [Proceedings of the 11th International Conference on Computer Aided Architectural Design Futures / ISBN 1-4020-3460-1] Vienna (Austria) 20–22 June 2005, pp. 311-320
summary	In this paper, we present a theoretical study on automated understanding of the design drawing. This can lead to design support through the natural interface of sketching. In earlier work, 24 plan-based conventions of depiction have been identified, such as grid, zone, axial system, contour, and element vocabulary. These are termed graphic units. Graphic units form a good basis for recognition of drawings as they combine shape with meaning. We present some of the theoretical questions that have to be resolved before an implementation can be made. The contribution of this paper is: (i) identification of domain knowledge which is necessary for recognition; (ii) outlining combined strategy of multi-agent systems and online recognition; (iii) functional structure for agents and their organisation to converge on sketch recognition.
keywords	multi-agent system, decision tree, pattern recognition, sketch
series	CAAD Futures
email
last changed	2006/11/07 07:27

_id	caadria2005_a_2b_a
id	caadria2005_a_2b_a
authors	Affleck, Janice; Kvan Thomas
year	2005
title	REINTERPRETING VIRTUAL HERITAGE
source	CAADRIA 2005 [Proceedings of the 10th International Conference on Computer Aided Architectural Design Research in Asia / ISBN 89-7141-648-3] New Delhi (India) 28-30 April 2005, vol. 1, pp. 169-178
doi	https://doi.org/10.52842/conf.caadria.2005.169
summary	This paper describes the context and proposal for an alternative approach to the common pattern of application of digital tools in the area of cultural heritage, also know as Virtual Heritage (VH). It investigates and addresses arising issues in a digital case study developed to implement a theoretical framework and investigate how and if existing technology can support it.
series	CAADRIA
type	normal paper
email
last changed	2022/06/07 07:54

_id	sigradi2005_321
id	sigradi2005_321
authors	Almeida da Silva, Adriane Borda; Ana Lúcia Pinho Lucas, Ricardo Silveira
year	2005
title	Defining a process of design and learning of digital graphics by means of distance education
source	SIGraDi 2005 - [Proceedings of the 9th Iberoamerican Congress of Digital Graphics] Lima - Peru 21-24 november 2005, vol. 1, pp. 321-326
summary	This paper describes and analyses the teaching/learning approach which progressively is being established in the context of the Digital Graphics Post-Graduation Course. The method used has, basically, generated educational situations able to increase the self-learning capacity of the students; develop skills for collaborative activities to build the knowledge and overtake the limits of time and space imposed by traditional educational systems. The theoretical references adopted to draw the didactic situations are explained, these situations include more and more moments of distance learning, synchronous or asynchronous, redefining the attitude of lecturers and students. This work points out the introduction of a tutor, an agent to promote interactions among student/lecturer/object of knowledge; and the investment on production of didactic material specific to digital graphics is emphasized between lecturers and students, exploring collaborative activities to the distance learning modality. [Full paper in Portuguese]
series	SIGRADI
email
last changed	2016/03/10 09:47

_id	ecaade2017_184
id	ecaade2017_184
authors	Almeida, Daniel and Sousa, José Pedro
year	2017
title	Tradition and Innovation in Digital Architecture - Reviewing the Serpentine Gallery Pavilion 2005
source	Fioravanti, A, Cursi, S, Elahmar, S, Gargaro, S, Loffreda, G, Novembri, G, Trento, A (eds.), ShoCK! - Sharing Computational Knowledge! - Proceedings of the 35th eCAADe Conference - Volume 1, Sapienza University of Rome, Rome, Italy, 20-22 September 2017, pp. 267-276
doi	https://doi.org/10.52842/conf.ecaade.2017.1.267
summary	Please write your aToday, in a moment when digital technologies are taking command of many architectural design and construction processes, it is important to examine the place and role of traditional ones. Designed by Álvaro Siza and Eduardo Souto de Moura in collaboration with Cecil Balmond, the Serpentine Gallery Pavilion 2005 reflects the potential of combining those two different approaches in the production of innovative buildings. For inquiring this argument, this paper investigates the development of this project from its conception to construction with a double goal: to uncover the relationship between analogical and digital processes, and to understand the architects' role in a geographically distributed workflow, which involved the use of computational design and robotic fabrication technologies. To support this examination, the authors designed and fabricated a 1:3 scale prototype of part of the Pavilion, which also served to check and reflect on the technological evolution since then, which is setting different conditions for design development and collaboration.bstract here by clicking this paragraph.
keywords	Serpentine Gallery Pavilion; Computational Design; Digital Fabrication; Wooden Construction; Architectural Representation;
series	eCAADe
email
last changed	2022/06/07 07:54

_id	2005_811
id	2005_811
authors	Anay, Hakan
year	2005
title	A Critical Approach to the Use of Computers in Architectural Design
source	Digital Design: The Quest for New Paradigms [23nd eCAADe Conference Proceedings / ISBN 0-9541183-3-2] Lisbon (Portugal) 21-24 September 2005, pp. 811-817
doi	https://doi.org/10.52842/conf.ecaade.2005.811
summary	There are two dominant approaches to architectural and urbanistic problem solving: program based approaches and paradigm based approaches. Beyond these two, this paper proposes the critical/formalist approach as a paradigm for architectural design while summarizing the epistemological foundations of it, and investigates the possible contribution of the computers to this approach. The primary aim is to set a starting point for a more comprehensive future research.
keywords	Design Theory, Design Methodology, Computer Aided Design, Formalism, Architectural Form
series	eCAADe
email
last changed	2022/06/07 07:54

_id	caadria2005_a_1a_b
id	caadria2005_a_1a_b
authors	B. Senyapili, I. Basa
year	2005
title	RECONCILING COMPUTER AND HAND: THE CASE OF AUTHOR IDENTITY IN DESIGN PRESENTATIONS
source	CAADRIA 2005 [Proceedings of the 10th International Conference on Computer Aided Architectural Design Research in Asia / ISBN 89-7141-648-3] New Delhi (India) 28-30 April 2005, vol. 1, pp. 13-22
doi	https://doi.org/10.52842/conf.caadria.2005.013
summary	As computers were newly emerging in the field of architectural design, it was claimed that the impact of computers would change the way architects design and present. However, within the course of computer use in design, although the field of architectural practice might have been altered extremely, in architectural education there still seems to be a bond to conventional mind-hand-paper relation. One of the reasons for that bond is the fact that although being r 1000 elated to many technologies, architecture essentially positions itself around an artistic core that is still fed with conventional modes of creation. Architectural education aims at adopting and working on this very core. One of the major contributors in the formation of this core is the presence of author identity. This paper makes a critical approach to computers in terms of expressing author identity in design presentations especially during design education. We believe that the author identity is important in design education in terms of identifying the potential and skills of the student. Especially in design education the final step of design process turns out to be the presentation, unlike architectural practice where the presented design is actually built. Within this conception, two different studies were held in an educational environment with 160 design students and 20 design instructors. The results of both studies pointed at the fact that the digital opportunities that exist for design education should evolve around preserving and underlining the author identity in design presentations.
series	CAADRIA
type	normal paper
email
last changed	2022/06/07 07:54

_id	acadia05_170
id	acadia05_170
authors	Barker, Daniel and Dong, Andy
year	2005
title	A Representation Language for a Prototype CAD Tool for Intelligent Rooms
source	Smart Architecture: Integration of Digital and Building Technologies [Proceedings of the 2005 Annual Conference of the Association for Computer Aided Design In Architecture / ISBN 0-9772832-0-8] Savannah (Georgia) 13-16 October 2005, pp. 170-183
doi	https://doi.org/10.52842/conf.acadia.2005.170
summary	Intelligent rooms are a type of intelligent environment which enhance ordinary activities within the confines of a room by responding to human interaction using pervasive and ubiquitous computing. In the design of intelligent rooms, the specification of how the intelligent room enacts intelligent behavior through computational means is as integral as the geometric description. The self-aware and context-aware capabilities of intelligent rooms extend the requirements for computer-aided design tools beyond 3D modeling of objects. This article presents a Hardware as Agents Description Language for Intelligent Rooms (HADLIR) to model hardware in an intelligent room as “hardware agents” having sensor and/or effector modalities with rules and goals. End-users describe intelligent room hardware as agents based on the HADLIR representation and write agent rules and goals in Jess for each hardware component. This HADLIR agent description and the requisite software sensors/effectors constitute “hardware agents” which are instantiated into a multi-agent society software environment. The society is then bridged to either a virtual environment to prototype the intelligent room or to microelectronic controllers to implement a physical intelligent room. The integration illustrates how the HADLIR representation assists in the design, simulation and implementation of an intelligent room and provides a foundation technology for CAD tools for the creation of intelligent rooms.
series	ACADIA
email
last changed	2022/06/07 07:54

_id	cf2011_p170
id	cf2011_p170
authors	Barros, Mário; Duarte José, Chaparro Bruno
year	2011
title	Thonet Chairs Design Grammar: a Step Towards the Mass Customization of Furniture
source	Computer Aided Architectural Design Futures 2011 [Proceedings of the 14th International Conference on Computer Aided Architectural Design Futures / ISBN 9782874561429] Liege (Belgium) 4-8 July 2011, pp. 181-200.
summary	The paper presents the first phase of research currently under development that is focused on encoding Thonet design style into a generative design system using a shape grammar. The ultimate goal of the work is the design and production of customizable chairs using computer assisted tools, establishing a feasible practical model of the paradigm of mass customization (Davis, 1987). The current research step encompasses the following three steps: (1) codification of the rules describing Thonet design style into a shape grammar; (2) implementing the grammar into a computer tool as parametric design; and (3) rapid prototyping of customized chair designs within the style. Future phases will address the transformation of the Thonet’s grammar to create a new style and the production of real chair designs in this style using computer aided manufacturing. Beginning in the 1830’s, Austrian furniture designer Michael Thonet began experimenting with forming steam beech, in order to produce lighter furniture using fewer components, when compared with the standards of the time. Using the same construction principles and standardized elements, Thonet produced different chairs designs with a strong formal resemblance, creating his own design language. The kit assembly principle, the reduced number of elements, industrial efficiency, and the modular approach to furniture design as a system of interchangeable elements that may be used to assemble different objects enable him to become a pioneer of mass production (Noblet, 1993). The most paradigmatic example of the described vision of furniture design is the chair No. 14 produced in 1858, composed of six structural elements. Due to its simplicity, lightness, ability to be stored in flat and cubic packaging for individual of collective transportation, respectively, No. 14 became one of the most sold chairs worldwide, and it is still in production nowadays. Iconic examples of mass production are formally studied to provide insights to mass customization studies. The study of the shape grammar for the generation of Thonet chairs aimed to ensure rules that would make possible the reproduction of the selected corpus, as well as allow for the generation of new chairs within the developed grammar. Due to the wide variety of Thonet chairs, six chairs were randomly chosen to infer the grammar and then this was fine tuned by checking whether it could account for the generation of other designs not in the original corpus. Shape grammars (Stiny and Gips, 1972) have been used with sucesss both in the analysis as in the synthesis of designs at different scales, from product design to building and urban design. In particular, the use of shape grammars has been efficient in the characterization of objects’ styles and in the generation of new designs within the analyzed style, and it makes design rules amenable to computers implementation (Duarte, 2005). The literature includes one other example of a grammar for chair design by Knight (1980). In the second step of the current research phase, the outlined shape grammar was implemented into a computer program, to assist the designer in conceiving and producing customized chairs using a digital design process. This implementation was developed in Catia by converting the grammar into an equivalent parametric design model. In the third phase, physical models of existing and new chair designs were produced using rapid prototyping. The paper describes the grammar, its computer implementation as a parametric model, and the rapid prototyping of physical models. The generative potential of the proposed digital process is discussed in the context of enabling the mass customization of furniture. The role of the furniture designer in the new paradigm and ideas for further work also are discussed.
keywords	Thonet; furniture design; chair; digital design process; parametric design; shape grammar
series	CAAD Futures
email
last changed	2012/02/11 19:21

_id	2005_491
id	2005_491
authors	Beirão, José and Duarte, José
year	2005
title	Urban Grammars: Towards Flexible Urban Design
source	Digital Design: The Quest for New Paradigms [23nd eCAADe Conference Proceedings / ISBN 0-9541183-3-2] Lisbon (Portugal) 21-24 September 2005, pp. 491-500
doi	https://doi.org/10.52842/conf.ecaade.2005.491
summary	Traditional urban plans have definitive design systems, without the flexibility required to deal with the complexity and change that characterise contemporary urban societies. To provide urban plans with increased flexibility, it is proposed a design methodology capable of producing various design solutions instead of a specific definitive design. The methodology uses shape grammars as a process for generating urban design. In this approach, design becomes a system of solutions rather than a specific one. Through the analyses of a group of urban plans, a design methodology was sketched in which rules are used to enable more flexibility. These plans where chosen for their perceived qualities in terms of language, planning efficiency, and latent flexibility. As a result, a four-phased methodology was identified and thus, proposed for designing urban plans. This methodology was then combined with shape grammars and tested in a design studio setting. Students were asked to use the methodology and shape grammars as auxiliary instruments in the design of a flexible plan for a new town. In the following year, to simulate real-world conditions and oblige students to consider urban ordering and scale, work was structured differently. First, students were asked to develop a rule-based urban plan as in the previous year. Second, they were asked to conceive a detail plan for a sector of an urban plan defined by another group of students following its rules. The plans were then analysed with the goal of refining the methodology. Results show that shape grammars produce urban plans with non-definitive formal solutions, while keeping a consistent spatial language. They also provide plans with explicit and implicit flexibility, thereby giving future designers a wider degree of freedom. Finally, they provide students with a concrete methodology for approaching urban design and foster the development of additional designing skills.
keywords	Shape Grammars, Flexible Urban Design
series	eCAADe
email
last changed	2022/06/07 07:54

_id	caadria2005_b_6a_c
id	caadria2005_b_6a_c
authors	Bige Tunçer, Özer Ciftcioglu, Sevil Sariyildiz, Michael Cumming
year	2005
title	Intelligent design support
source	CAADRIA 2005 [Proceedings of the 10th International Conference on Computer Aided Architectural Design Research in Asia / ISBN 89-7141-648-3] New Delhi (India) 28-30 April 2005, vol. 2, pp. 436-446
doi	https://doi.org/10.52842/conf.caadria.2005.436
summary	Design is a complex process that is information and communication intensive. In a design context, the use of knowledge technologies can assist designers in making informed design decisions. This paper reports on an educational experiment that implements an intelligent urban design aid. This experiment facilitates students to do research in a systematic way by using ICKT methods, techniques and tools in order to improve the quality of their urban design. We outline the process, describe the intelligent techniques, discuss the results of the educational experiment, and explore the approach’s potential for real-life design practices.
series	CAADRIA
email
last changed	2022/06/07 07:52

_id	acadia05_226
id	acadia05_226
authors	Biloria, N., Oosterhuis, K. and Aalbers, C.
year	2005
title	Design Informatics
source	Smart Architecture: Integration of Digital and Building Technologies [Proceedings of the 2005 Annual Conference of the Association for Computer Aided Design In Architecture / ISBN 0-9772832-0-8] Savannah (Georgia) 13-16 October 2005, pp. 226-235
doi	https://doi.org/10.52842/conf.acadia.2005.226
summary	The research paper exemplifies a novel information integrated design technique developed at ONL (Oosterhuis and Lenard), Netherlands, specifically appropriated for envisaging complex geometric forms. The ‘informed design technique’, apart from being highly instrumental in conceptualizing and generating the geometric component constituting architectural form in a parametric manner, is also efficiently utilized for precise computer aided manufacturing and construction of the speculated form. Geometric complexities inherent in contemporary architectural constructs and the time spent in appropriation of such topologies, fueled the ‘informed design’ approach, which caters to issues of timely construction, precision oriented design and production (visual and material) and parametric modeling attuned to budgetary fluctuations. This design-research approach has been tested and deployed by ONL, for conceiving ‘the Acoustic Barrier’ project, Utrecht Leidsche Rijn in the Netherlands and is treated as a generic case for exemplifying the ‘informed design’ technique in this research paper. The design methodology encourages visualizing architectural substantiations from a systems perspective and envisages upon a rule based adaptive systems approach involving extrapolation of contextual dynamics/ground data in terms of logical ‘rules’. These rules/conditionalities form the basis for spawning parametric logistics to be mapped upon geometric counterparts exemplifying the conception. The simulated parametric relations bind dimensional aspects (length, width, height etc.) of the geometric construct in a relational manner, eventually culminating in a 3D spatial envelope. This evolved envelope is subsequently intersected with a ‘parametric spatio-constructive grid’, creating specific intersecting points between the two. The hence extorted ‘point cloud’ configuration serves as a generic information field concerning highly specific coordinates, parameters and values for each individual point/constructive node it embodies. The relations between these points are directly linked with precise displacements of structural profiles and related scaling factors of cladding materials. Parallel to this object oriented modeling approach, a detailed database (soft/information component) is also maintained to administer the relations between the obtained points. To be able to derive constructible structural and cladding components from the point cloud configuration customized Scripts (combination of Lisp and Max scripts) process the point cloud database. The programmed script-routines, iteratively run calculations to generate steel-wireframes, steel lattice-structure and cladding panels along with their dimensions and execution drawing data. Optimization-routines are also programmed to make rectifications and small adjustments in the calculated data. This precise information is further communicated with CNC milling machines to manifest complex sectional profiles formulating the construct hence enabling timely and effective construction of the conceptualized form.
series	ACADIA
email
last changed	2022/06/07 07:54

_id	2005_441
id	2005_441
authors	Biloria, Nimish
year	2005
title	Emergent Technologies and Design
source	Digital Design: The Quest for New Paradigms [23nd eCAADe Conference Proceedings / ISBN 0-9541183-3-2] Lisbon (Portugal) 21-24 September 2005, pp. 441-447
doi	https://doi.org/10.52842/conf.ecaade.2005.441
summary	The recurrent issue of materializing a responsive architectural spatiality, emergent, in its conception and the need for collaborative substantiation of the design process, utilizing a multidisciplinary approach towards developing intelligent architectonics are exemplified upon in this research paper through a design research experiments conducted by the author: Developing concept prototypes for electronic media augmented spatial skins. The augmented skin project exemplifies a synergetic merger of scientific investigations into the fields of bio-mimetics, control system, material technology and embedded computation techniques.
keywords	Control Systems; Real-Time Interactivity; Bio-Mimetics; Embedded Computation
series	eCAADe
email
last changed	2022/06/07 07:54

_id	2005_829
id	2005_829
authors	Boeykens, Stefan and Neuckermans, Herman
year	2005
title	Scale Level and Design Phase Transitions in a Digital Building Model
source	Digital Design: The Quest for New Paradigms [23nd eCAADe Conference Proceedings / ISBN 0-9541183-3-2] Lisbon (Portugal) 21-24 September 2005, pp. 829-836
doi	https://doi.org/10.52842/conf.ecaade.2005.829
summary	Research and development on Computer Aided Architectural Design often focuses on simulating a building as a digital model. Our research on the early design stages explores concepts we feel are lacking in current design tools and research projects. Building models are usually static models, serving as a snapshot of the design. We aim to support design phase and scale level transitions, to better support the workflow of the designer. This paper formulates our approach at supporting transitions in an integrated design environment for architecture.
keywords	CAAD, Architectural Modeling, Design Process
series	eCAADe
email
last changed	2022/06/07 07:52

_id	ijac20053306
id	ijac20053306
authors	Cabral Filho, Jose dos Santos
year	2005
title	Digital Art A Field of Inquiry for Contemporary Architecture
source	International Journal of Architectural Computing vol. 3 - no. 3, 355-372
summary	This article investigates the interplay of digital technology, art and architecture and it presents a series of experimental workshops developed at LAGEAR (Graphic Laboratory for the Experience of Architecture, School of Architecture at UFMG, Brazil). The intention of these workshops is to include an artistic approach to the work in a computer lab dedicated to teaching and researching architecture. At first, a discussion on the relationship between art and architecture is presented, followed by an analysis of the enhancement of such relationship with the advent of digital technology. Then a series of works developed by artists and students in collaboration is described. The article concludes with a discussion on the role of digital art for architectural education. It is proposed that it may be one of the most adequate fields for students to freely investigate contemporary issues, such as interactivity and automation, which are now shaping our built environment.
series	journal
more	http://www.ingentaconnect.com/search/expand?pub=infobike://mscp/ijac/2005/00000003/00000003/art00007
last changed	2007/03/04 07:08

_id	cf2005_1_34_180
id	cf2005_1_34_180
authors	CALDERON Carlos, WORLEY Nicholas and NYMAN Karl
year	2005
title	Architectural Cinematographer: An Initial Approach to Experiential Design in Virtual Worlds
source	Computer Aided Architectural Design Futures 2005 [Proceedings of the 11th International Conference on Computer Aided Architectural Design Futures / ISBN 1-4020-3460-1] Vienna (Austria) 20–22 June 2005, pp. 135-144
summary	This paper presents a paradigm for the generation of camera placements for architectural virtual environments as a method of enhancing the user's experience and as a way of facilitating the understanding of architectural designs. This paper reports on an initial prototype of a real-time cinematic control camera engine which enables the creation of architectural walkthroughs with a narrative structure. Currently, there is neither software nor a structured approach which facilitates this in architectural visualisations. The paper discusses the potential of our approach; analyses the technical and application domain challenges; examines its current limitations using well known architectural design concepts such as rhythm.
keywords	virtual environments, navigation, camera engine, cinematography, experiential design
series	CAAD Futures
email
last changed	2006/11/07 07:27

For more results click below: