Cumincad : CUMINCAD Papers : Search Results

CumInCAD is a Cumulative Index about publications in Computer Aided Architectural Design
supported by the sibling associations ACADIA, CAADRIA, eCAADe, SIGraDi, ASCAAD and CAAD futures

PDF papers
References

Hits 1 to 20 of 558

Reformat results as: short short into frame detailed detailed into frame

_id	2005_331
id	2005_331
authors	Al-Douri, Firas A., Clayton, Mark J. and Abrams, Robin F.
year	2005
title	The Impact of 3D Digital Modeling on the 3D Design Aspects in Urban Design Plans
doi	https://doi.org/10.52842/conf.ecaade.2005.331
source	Digital Design: The Quest for New Paradigms [23nd eCAADe Conference Proceedings / ISBN 0-9541183-3-2] Lisbon (Portugal) 21-24 September 2005, pp. 331-340
summary	Some experts suggest that urban design plans in US cities may lack adequate coverage of the three-dimensional design aspects of the built environment. 3D digital models may help designers visualize and interact with design alternatives, large urban data sets, and 3D information more effectively, thus correcting this problem. Case studies of recent urban design plans that have used 3D digital models may indicate whether these technologies can increase the quality of the plan. This research discusses the role 3D urban models can play in supporting designers in addressing the 3D design aspects. A literature review focused on reviewing secondary sources to construct or adopt theoretical propositions against which the empirical data can be compared and contrasted. A case study involved investigating the methods with which 3D models have been used in developing a selected urban design plan. The content analysis of the case study refuted the premise that the plan would inadequately address 3D aspects and utilize 3D information, and indicated an effective usage of 3D modeling to analyze and represent most of the 3D and 2D information elements and issues. The results are consistent with a hypothesis that the effective usage of 3D modeling would result in the effective coverage of 3D information and issues. The effective usage of the model’s functionalities has improved the quality of the decision-making process through improving designers’ cognitive capabilities and providing a platform for communicating design ideas among and across design teams.
keywords	3D Modeling; Urban Design Plans; Digital Models; 3D Design Aspects
series	eCAADe
email
last changed	2022/06/07 07:54

_id	cf2011_p170
id	cf2011_p170
authors	Barros, Mário; Duarte José, Chaparro Bruno
year	2011
title	Thonet Chairs Design Grammar: a Step Towards the Mass Customization of Furniture
source	Computer Aided Architectural Design Futures 2011 [Proceedings of the 14th International Conference on Computer Aided Architectural Design Futures / ISBN 9782874561429] Liege (Belgium) 4-8 July 2011, pp. 181-200.
summary	The paper presents the first phase of research currently under development that is focused on encoding Thonet design style into a generative design system using a shape grammar. The ultimate goal of the work is the design and production of customizable chairs using computer assisted tools, establishing a feasible practical model of the paradigm of mass customization (Davis, 1987). The current research step encompasses the following three steps: (1) codification of the rules describing Thonet design style into a shape grammar; (2) implementing the grammar into a computer tool as parametric design; and (3) rapid prototyping of customized chair designs within the style. Future phases will address the transformation of the Thonet’s grammar to create a new style and the production of real chair designs in this style using computer aided manufacturing. Beginning in the 1830’s, Austrian furniture designer Michael Thonet began experimenting with forming steam beech, in order to produce lighter furniture using fewer components, when compared with the standards of the time. Using the same construction principles and standardized elements, Thonet produced different chairs designs with a strong formal resemblance, creating his own design language. The kit assembly principle, the reduced number of elements, industrial efficiency, and the modular approach to furniture design as a system of interchangeable elements that may be used to assemble different objects enable him to become a pioneer of mass production (Noblet, 1993). The most paradigmatic example of the described vision of furniture design is the chair No. 14 produced in 1858, composed of six structural elements. Due to its simplicity, lightness, ability to be stored in flat and cubic packaging for individual of collective transportation, respectively, No. 14 became one of the most sold chairs worldwide, and it is still in production nowadays. Iconic examples of mass production are formally studied to provide insights to mass customization studies. The study of the shape grammar for the generation of Thonet chairs aimed to ensure rules that would make possible the reproduction of the selected corpus, as well as allow for the generation of new chairs within the developed grammar. Due to the wide variety of Thonet chairs, six chairs were randomly chosen to infer the grammar and then this was fine tuned by checking whether it could account for the generation of other designs not in the original corpus. Shape grammars (Stiny and Gips, 1972) have been used with sucesss both in the analysis as in the synthesis of designs at different scales, from product design to building and urban design. In particular, the use of shape grammars has been efficient in the characterization of objects’ styles and in the generation of new designs within the analyzed style, and it makes design rules amenable to computers implementation (Duarte, 2005). The literature includes one other example of a grammar for chair design by Knight (1980). In the second step of the current research phase, the outlined shape grammar was implemented into a computer program, to assist the designer in conceiving and producing customized chairs using a digital design process. This implementation was developed in Catia by converting the grammar into an equivalent parametric design model. In the third phase, physical models of existing and new chair designs were produced using rapid prototyping. The paper describes the grammar, its computer implementation as a parametric model, and the rapid prototyping of physical models. The generative potential of the proposed digital process is discussed in the context of enabling the mass customization of furniture. The role of the furniture designer in the new paradigm and ideas for further work also are discussed.
keywords	Thonet; furniture design; chair; digital design process; parametric design; shape grammar
series	CAAD Futures
email
last changed	2012/02/11 19:21

_id	sigradi2005_438
id	sigradi2005_438
authors	Bessone, Miriam; Ricardo Pérez Miró, Isabel Molinas
year	2005
title	Digital visualization and new intellectual associations among language - music - architecture
source	SIGraDi 2005 - [Proceedings of the 9th Iberoamerican Congress of Digital Graphics] Lima - Peru 21-24 november 2005, vol. 1, pp. 438-443
summary	Throughout history, architecture has transposed contributions bound to structuralist focus or to musical composition. This is from linguistic and music respectively. New visualization systems show the possibility to give transpositions a new meaning, form the potentialities of hypermedia; locking for new projects parameters. This papers will show experimental workshop results developed within CI+D 2000 “New speeches and design process”. They study links and explore our work interrelating word – music and image. These processes are developed by people coming from literature, visual arts, music, and architecture areas. Lastly, the first results will be shown. Since parameters were transposed from music, by using NURBS forms, space prefiguration is tried out. [Full paper in Spanish]
series	SIGRADI
email
last changed	2016/03/10 09:47

_id	cf2005_1_54_91
id	cf2005_1_54_91
authors	CANEPARO Luca, MASALA Elena and ROBIGLIO Matteo
year	2005
title	Dynamic Generative Modelling System for Urban and Regional Design
source	Computer Aided Architectural Design Futures 2005 [Proceedings of the 11th International Conference on Computer Aided Architectural Design Futures / ISBN 1-4020-3460-1] Vienna (Austria) 20–22 June 2005, pp. 259-268
summary	This paper introduces a dynamic generative modelling system for urban and regional design. Through dynamic modelling the system evolves in time according to the interactions of the planners, decision-makers and citizens. On the basis of several synchronous and/or asynchronous user interactions, models are dynamically generated at run time. The models are built by defining the data (datasets) and the actions to perform on that data (tasks). The system reads and correlates data at urban and regional scale from various authorities to generate dynamic datasets. Tasks are especially powerful when they integrate generative procedures in a hierarchical structure. This allows us to model urban and regional dynamics through the interaction of tasks at micro- and macro-scale. Tasks can also implement either Cellular Automata or software agents. We examine the system application to a case project: the simulation of micro- and macro-dynamics in an Alpine valley, with specific challenges to fit competitive and sustainable growth in a landscape quality perspective. The simulation in spatial and temporal dimensions of regional data provided us with the elements to study the territorial evolution over the next twenty years. Four strategies gave as many scenarios highlighting the results of specific policies.
keywords	large-scale modelling, participatory design, GIS, software agent, datascape
series	CAAD Futures
email
last changed	2006/11/07 07:27

_id	cf2011_p051
id	cf2011_p051
authors	Cote, Pierre; Mohamed-Ahmed Ashraf, Tremblay Sebastien
year	2011
title	A Quantitative Method to Compare the Impact of Design Mediums on the Architectural Ideation Process.
source	Computer Aided Architectural Design Futures 2011 [Proceedings of the 14th International Conference on Computer Aided Architectural Design Futures / ISBN 9782874561429] Liege (Belgium) 4-8 July 2011, pp. 539-556.
summary	If we compare the architectural design process to a black box system, we can assume that we now know quite well both inputs and outputs of the system. Indeed, everything about the early project either feasibility studies, programming, context integration, site analysis (urban, rural or natural), as well as the integration of participants in a collaborative process can all be considered to initiate and sustain the architectural design and ideation process. Similarly, outputs from that process are also, and to some extent, well known and identifiable. We are referring here, among others, to the project representations or even to the concrete building construction and its post-evaluation. But what about the black box itself that produces the ideation. This is the question that attempts to answer the research. Currently, very few research works linger to identify how the human brain accomplishes those tasks; how to identify the cognitive functions that are playing this role; to what extent they operate and complement each other, and among other things, whether there possibly a chain of causality between these functions. Therefore, this study proposes to define a model that reflects the activity of the black box based on the cognitive activity of the human brain. From an extensive literature review, two cognitive functions have been identified and are investigated to account for some of the complex cognitive activity that occurs during a design process, namely the mental workload and mental imagery. These two variables are measured quantitatively in the context of real design task. Essentially, the mental load is measured using a Bakan's test and the mental imagery with eyes tracking. The statistical software G-Power was used to identify the necessary subject number to obtain for significant variance and correlation result analysis. Thus, in the context of an exploratory research, to ensure effective sample of 0.25 and a statistical power of 0.80, 32 participants are needed. All these participants are students from 3rd, 4th or 5th grade in architecture. They are also very familiar with the architectural design process and the design mediums used, i.e., analog model, freehand drawing and CAD software, SketchUp. In three experimental sessions, participants were asked to design three different projects, namely, a bus shelter, a recycling station and a public toilet. These projects were selected and defined for their complexity similarity, taking into account the available time of 22 minutes, using all three mediums of design, and this in a randomly manner to avoid the order effect. To analyze the two cognitive functions (mental load and mental imagery), two instruments are used. Mental imagery is measured using eye movement tracking with monitoring and quantitative analysis of scan paths and the resulting number and duration of participant eye fixations (Johansson et al, 2005). The mental workload is measured using the performance of a modality hearing secondary task inspired by Bakan'sworks (Bakan et al.; 1963). Each of these three experimental sessions, lasting 90 minutes, was composed of two phases: 1. After calibrating the glasses for eye movement, the subject had to exercise freely for 3 minutes while wearing the glasses and headphones (Bakan task) to get use to the wearing hardware. Then, after reading the guidelines and criteria for the design project (¬± 5 minutes), he had 22 minutes to execute the design task on a drawing table allowing an upright posture. Once the task is completed, the subject had to take the NASA TLX Test, on the assessment of mental load (¬± 5 minutes) and a written post-experimental questionnaire on his impressions of the experiment (¬± 10 minutes). 2. After a break of 5-10 minutes, the participant answered a psychometric test, which is different for each session. These tests (¬± 20 minutes) are administered in the same order to each participant. Thus, in the first experimental session, the subject had to take the psychometric test from Ekstrom et al. (1978), on spatial performance (Factor-Referenced Cognitive Tests Kit). During the second session, the cognitive style is evaluated using Oltman's test (1971). Finally, in the third and final session, participant creativity is evaluated using Delis-Kaplan test (D-KEFS), Delis et al. (2001). Thus, this study will present the first results of quantitative measures to establish and validate the proposed model. Furthermore, the paper will also discuss the relevance of the proposed approach, considering that currently teaching of ideation in ours schools of architecture in North America is essentially done in a holistic manner through the architectural project.
keywords	design, ideation process, mental workload, mental imagery, quantitative mesure
series	CAAD Futures
email
last changed	2012/02/11 19:21

_id	cf2005_1_33_194
id	cf2005_1_33_194
authors	HE Jie, TSOU Jin Yeu, XUE Yucai and CHOW Benny
year	2005
title	A Visual Landscape Assessment Approach for High-density Urban Development
source	Computer Aided Architectural Design Futures 2005 [Proceedings of the 11th International Conference on Computer Aided Architectural Design Futures / ISBN 1-4020-3460-1] Vienna (Austria) 20–22 June 2005, pp. 125-134
summary	The rapid developments of economy and urbanization bring great pressure to natural environment and resources, which contribute big challenge to sustainable urban development in high-density urban areas like Hong Kong, China and many other Eastern Asia cities. In these areas, protecting natural landscape resources and enhancing visibility to urban spaces and residential zones has become significant in improving the livability of human settlement. This paper presents a new approach in assessing the visual quality in high-density urban environment. The principal methodology is to quantitatively integrate human visual perception parameters with the visible landscape resources' characteristics. GIS is employed as the database and technical platform. A residential development in Hong Kong was used as a case study. The approach provides decision making support to urban planning, site layout design, and estate management during the early stage of the schematic design/planning process.
keywords	visual perception, visual quality assessment, urban planning, GIS
series	CAAD Futures
email
last changed	2006/11/07 07:27

_id	caadria2005_a_7c_d
id	caadria2005_a_7c_d
authors	Jin Yeu Tsou, Jie He, Yucai Xue
year	2005
title	An Open Space with Scenery: ‘Greenscape Index’ for Performance Based Planning of High Density Urban Habitation
doi	https://doi.org/10.52842/conf.caadria.2005.328
source	CAADRIA 2005 [Proceedings of the 10th International Conference on Computer Aided Architectural Design Research in Asia / ISBN 89-7141-648-3] New Delhi (India) 28-30 April 2005, vol. 1, pp. 328-334
summary	This paper presents an improvement of the original openness ratio concept, which has been formulated as an integrated index for early-stage urban open space planning and design support. The ‘greenscape index’ is a rating system which quantitatively integrates human visual perception with the visible landscape resources to evaluate the visual quality of open space vision within high-density urban environment. This new index is expected to provide more comprehensive environmental performance consideration criteria for urban planning and design. The research team also discusses the potential of the introducing this index to assess both psychological preference and physical form of urban open spaces. The new concept also has shown its feasibility on integrating key environmental considerations in visual sensitivity, urban wind, urban noise and solar heat gain into simple massing study which is applicable in the preliminary planning stage.
series	CAADRIA
email
last changed	2022/06/07 07:52

_id	caadria2005_a_2a_d
id	caadria2005_a_2a_d
authors	Kvan, Thomas, Li, Weidong
year	2005
title	A Computer-Supported Participative Design Jury
doi	https://doi.org/10.52842/conf.caadria.2005.154
source	CAADRIA 2005 [Proceedings of the 10th International Conference on Computer Aided Architectural Design Research in Asia / ISBN 89-7141-648-3] New Delhi (India) 28-30 April 2005, vol. 1, pp. 154-164
summary	As the design jury changed from closed to open format, it inevitably becomes a learning environment in architectural education. But its educational goal has not been best achieved. A significant problem reported in the literature is that students are not able to participate effectively along the review process. In this research, we conducted a survey to study the local design juries and intend to interpret the survey result by examining the group process losses in conventional design juries. We also discussed the possibility to improve the effectiveness of design juries in terms of increasing students’ active participation and learning experience by integrating groupware to support a structured review process.
series	CAADRIA
email
last changed	2022/06/07 07:52

_id	ijac20053108
id	ijac20053108
authors	Mullins, Michael; [Zupancic] Strojan, Tadeja Z.
year	2005
title	Representational Thickness: a quantitative comparison between physical, CAVE and Panorama environments
source	International Journal of Architectural Computing vol. 3 - no. 1, 127-144
summary	This study compares aspects of spatial perception in a physical environment and its virtual representations in a CAVE and Panorama. To measure accuracy of spatial perception, users were asked to look at identical objects in the three environments and then locate them and identify their shape on scaled drawings. Results were then statistically compared for differences. In a discussion of the results, the paper addresses three hypothetical assertions – that depth perception in physical reality and its virtual representations in CAVE and Panorama are quantifiably different; that differences are attributable to prior contextual experience of the viewer; and that design professionals and laypeople have different perceptions of what they see in VR. In conclusion, the concept of 'representational thickness' is suggested by the results.
series	journal
type	normal paper
more	http://www.multi-science.co.uk/ijac.htm
last changed	2007/03/04 07:08

_id	d2a9
id	d2a9
authors	PAPADIMITRIOU Kimon, KOUZELEAS Stelios
year	2005
title	A METHOD FOR REAL TIME SPATIAL ANALYSIS OF SOUND VIA MODELING IN A CAD ENVIRONMENT, BASED ON ACOUSTICAL MEASUREMENTS
source	14th European Colloquium on Theoretical and Quantitative Geography,September 9-13, 2005, Tomar, Portugal
summary	Typical modeling systems for spatial analysis employ data that represent the visual part of a landscape (e.g. relief and morphology), combined with other data about specific attributes (depending on the aims of an application). Thus, in a modeling environment, each place is described by a variety of properties that are not always visible. More of those “hidden” properties require special sensors and/or instruments to be captured and sometimes make their presence evident through human senses, such is sound. The present study takes advantage of wide spread technologies (such as GPS, VHF telecommunications and field sensors) and methodologies that are commonly used in telegeoprocessing – telegeomonitoring in order to simulate an existing acoustic environment. The aim is to acquire real time data about the sound (referenced to a particular area) and manipulate them in a CAD environment with purpose to visualize the sound influence in a specific landscape. Specifically it is proposed a method that transfers spatial data (collected from the field), directly into a modeling system (in the office, or in situ). In sequence the data is processed adequately to feed the modeling system that describes the current sound intensity of a place.
keywords	Environmental Simulation, Soundscape, Real-time data acquisition, Real-time 3D modeling
series	other
type	normal paper
email
more	http://e-geo.fcsh.unl.pt/ectqg2005/
last changed	2005/10/25 11:10

_id	sigradi2005_806
id	sigradi2005_806
authors	Torres, Gerson J. M
year	2005
title	Modeling and visualizing the architectural project and their relationship with the nature and the environment using Biocad and CAACD: Computer Architectural Aided Climatic Design
source	SIGraDi 2005 - [Proceedings of the 9th Iberoamerican Congress of Digital Graphics] Lima - Peru 21-24 november 2005, vol. 2, pp. 806-810
summary	Architecture is built in artificial and natural environments, some are real others are virtual. Until now, CAAD, CAD, and 3D modeling and simulation software have not included the environment and are therefore limited to imprecise representations. This challenges the algorithmic complexity of the software that simulates elements of nature, air, natural and artificial light using techniques of radiosity and raytracing. Today, CAACD (Computer Architectural Aided Climate Design) software needs information like geographic location, atmospheric and climatic conditions of the place to use it in conceptual decisions during the design process and to be able to guarantee environmental comfort in the project. This situation has provided me, together with professors and postgraduate students in the discipline of landscape architecture, with the fundamental framework for my study, namely: The virtual construction of a region, including digital representation of the built environment and the tropical flora. This paper describes the basic methodology used in such a process. [Full paper in Spanish]
series	SIGRADI
email
last changed	2016/03/10 10:01

_id	2005_729
id	2005_729
authors	Asanowicz, Alexander
year	2005
title	Computer Renderings – „Reality is Overrated”
doi	https://doi.org/10.52842/conf.ecaade.2005.729
source	Digital Design: The Quest for New Paradigms [23nd eCAADe Conference Proceedings / ISBN 0-9541183-3-2] Lisbon (Portugal) 21-24 September 2005, pp. 729-735
summary	In this paper, two problems concerning truthfulness of computer-generated visualization are considered. The first one concerns relationships between reality and its representation by computer renderings. The second problem concerns the kind of representations people need. These problems are analyzed for static perception of architectural forms based on computer visualization, and for dynamic walk-through perception of urban space. The thesis of the paper is that many photorealistic renderings are excessively realistic and thus not true. In this context, a new question arises: do we need the true representation of an object? The author claims that we need “adequate” pictures. Adequate means a picture that is satisfactory in particular situation. The problem of equivalence of media (renderings and animations) and reality is not that important here. Much research is concerned with the truthfulness and falsity of information. However, they do not take into consideration that frequently what seems to be real exerts bigger influence on people than what is in fact real. Understanding this problem may help us in producing images that better correspond to people’s expectations.
keywords	Perception, Rendering, Non-Photorealistic Rendering
series	eCAADe
email
last changed	2022/06/07 07:54

_id	cf2005_1_65_47
id	cf2005_1_65_47
authors	KOUTAMANIS Alexander
year	2005
title	Sketching with Digital Pen and Paper
source	Computer Aided Architectural Design Futures 2005 [Proceedings of the 11th International Conference on Computer Aided Architectural Design Futures / ISBN 1-4020-3460-1] Vienna (Austria) 20–22 June 2005, pp. 321-330
summary	Architectural sketching with the computer has been possible for some time now. Using manual and optical digitizers architects have been able to create images similar in structure and appearance to conventional sketches on paper. Digitized sketches are traditionally associated with early design but are also increasingly linked to interactive interfaces and information management. The paper reports on the application of a new technology (Anoto) that uses a digital pen on specially prepared paper. The focus of the application was feedback from analogue documents to the computer programs used for preparing these documents and on the roles of freehand sketching in later design phases. Sketching with digital pen and paper was found to be useful for the management of annotations made on analogue versions of digital information, especially in multi-actor synchronous and asynchronous situations.
keywords	digital sketching, annotation, information management, digitization, interaction
series	CAAD Futures
email
last changed	2006/11/07 07:27

_id	sigradi2005_333
id	sigradi2005_333
authors	Koutamanis, Alexander
year	2005
title	Group design evaluation
source	SIGraDi 2005 - [Proceedings of the 9th Iberoamerican Congress of Digital Graphics] Lima - Peru 21-24 november 2005, vol. 1, pp. 333-337
summary	Architectural visualization refers not only to the bulk of documents produced in the externalization of design representations but also to a major component of design communication and decision-taking. The paper focuses on the use of visualization in group design processes, i.e. processes typically involving the issues of common authorship, multi-actor design and intensive interaction between different aspects. It proposes that effective group design visualization requires hybrid environments that combine digital and analogue media in unobtrusive and efficient support structures. Registration of design information in group visualization refers primarily to two complementary dimensions: the syntagmatic (the sequence of actions that produce an image) and the paradigmatic (the collection of graphic primitives in the image). Recording syntagmatic information (i.e. who drew what and when) is essential for disentangling the usually dense results of group visualization and for distinguishing between actors, aspects and alternatives.
series	SIGRADI
email
last changed	2016/03/10 09:54

_id	2005_629
id	2005_629
authors	Koutamanis, Alexander
year	2005
title	A Biased History of CAAD
doi	https://doi.org/10.52842/conf.ecaade.2005.629
source	Digital Design: The Quest for New Paradigms [23nd eCAADe Conference Proceedings / ISBN 0-9541183-3-2] Lisbon (Portugal) 21-24 September 2005, pp. 629-637
summary	The democratization and popularization of the computer has brought on fundamental changes to many areas related to computer science, including CAAD. Such areas have been facing the necessity to reposition and reorient themselves in rapidly evolving academic and professional frameworks. A factor that complicates the processes of repositioning and reorientation is that most areas have a short but varied and frequently incoherent history that may be poorly understood. The paper is an attempt to trace the history of CAAD by means of publications. This refers to both key publications and the thematic structure of the overall CAAD production. The underlying hypothesis is that CAAD derives from two distinct ambitions, the technology-driven, bottom-up development of architectural computer graphics and the more domain theory-minded, top-down automation of designing. A third, less popular ambition is the computerization of analysis and evaluation, which can be treated as a subcategory of the previous two. The results of the bibliographic analysis are summarized in a timeline that indicates a convergence of ambitions and approaches in the 1980s, the period when CAAD became a recognizable area. In the 1990s the democratization and popularization of the computer caused diversification of CAAD activities over a wide spectrum, ranging from support to end-use of computer systems to computational theory and including the development of advanced, specific applications in cooperation with other architecture, building or design specializations.
keywords	History; Bibliography; Drawing; Design; Computerization
series	eCAADe
email
last changed	2022/06/07 07:51

_id	sigradi2005_468
id	sigradi2005_468
authors	Koutamanis, Alexander
year	2005
title	The continuity style in architectural dynamic visualization
source	SIGraDi 2005 - [Proceedings of the 9th Iberoamerican Congress of Digital Graphics] Lima - Peru 21-24 november 2005, vol. 1, pp. 468-472
summary	The term “continuity style” in cinema refers to a collection of cinematic conventions aiming at a realistic viewing experience without drawing attention to the elements of illusion used in the representation of 3D space on 2D film. The continuity style underlies the majority of narrative films produced to date and has had a significant influence on other genres, including documentaries. Despite the similarities in purpose, architectural filmmaking owes little to the cumulative knowledge of filmmaking encapsulated in the continuity style. While narrative films focus on the viewing experience, architectural animation tends to be dominated by integral 3D building models. We propose that key elements of the continuity style could be applied to architectural dynamic visualization in order to enhance both lay perception of architectural space and professional analysis of design intentions. These elements refer to four primary areas of architectural dynamic visualization: narrative, camera use, lighting and model structure.
series	SIGRADI
email
last changed	2016/03/10 09:54

_id	2005_407
id	2005_407
authors	Post, Jelle and Koutamanis, Alexander
year	2005
title	Simulation for Daylighting in the Real World
doi	https://doi.org/10.52842/conf.ecaade.2005.407
source	Digital Design: The Quest for New Paradigms [23nd eCAADe Conference Proceedings / ISBN 0-9541183-3-2] Lisbon (Portugal) 21-24 September 2005, pp. 407-414
summary	Technology has been an obvious solution to the increasing complexity of the built environment. As the number and specificity of use requirements increases, designers, clients and managers tend to segment the overall problem to manageable aspects only tentatively linked to each other. As a result, aspects such as ventilation and lighting tend to rely more on mechanical means than on the affordances of the overall design. Ironically this increases the complexity and opacity of the built environment probably to a greater extent than rules, regulations and requirements. The paper presents a review of available computational methods and techniques that aim at a more coherent approach by supporting integration of (day)lighting into architectural designing. It proposes that the two main courses of further action are the improvement and updating building regulations, and the combination of quantitative knowledge of good, existing daylight designs with advanced simulation-based analyses of early design proposals. Improvements in daylighting design and the integration of daylighting in design solutions depend primarily on design guidance based on the coordinated development and thorough understanding of usable measures such as the Daylight Factor, the Daylight Performance Index and function factors. A major prerequisite to both simulation and design guidance are robust and detailed geometrical 3D models that accommodate both the input and the output of design actions and transactions.
keywords	Simulation; Daylight; Integration
series	eCAADe
email
last changed	2022/06/07 08:00

_id	2005_837
id	2005_837
authors	Steijns Yolanda and Koutamanis, Alexander
year	2005
title	Representation and Typological Refinement in a Case-base
doi	https://doi.org/10.52842/conf.ecaade.2005.837
source	Digital Design: The Quest for New Paradigms [23nd eCAADe Conference Proceedings / ISBN 0-9541183-3-2] Lisbon (Portugal) 21-24 September 2005, pp. 837-844
summary	The subject of the paper is the possibilities and limitations of domain knowledge in design computing, as experienced in the development of a case-base of school buildings. In case-based design domain knowledge is used not only in the documentation and analysis of the cases but also in the structure of the casebase. The cases were documented and analysed using a geometric and topological representation. With respect to typological classification the highest abstraction level was occupied by three established types, the corridor, hall and pavilion type, which represent practically all school buildings in our case-base. Progressive abstraction of the geometric and topological representation returned the components of each type at various levels of specificity that correspond to different levels of design thinking and decision taking. The resulting typological / case-base structure provides a transparent description of both parts and global arrangements and has led to the identification of subtypes, variations and hybrids.
keywords	Knowledge Modelling; Case-Based Reasoning; Design Methodology
series	eCAADe
email
last changed	2022/06/07 07:56

_id	caadria2005_a_7b_a
id	caadria2005_a_7b_a
authors	Abdullah, A.Q.M. ; Md. Emran Hossain, Md. Shabab Habib Khan
year	2005
title	Digital Perception, Development and Presentation in Architecture: a study of Bangladesh with global context
doi	https://doi.org/10.52842/conf.caadria.2005.255
source	CAADRIA 2005 [Proceedings of the 10th International Conference on Computer Aided Architectural Design Research in Asia / ISBN 89-7141-648-3] New Delhi (India) 28-30 April 2005, vol. 1, pp. 255-267
summary	In the recent past the computer has become an important tool in both the design and presentation media/method in architecture. In this paper digitalization in architectural practice and architectural education in both the global and Bangladesh contexts have been studied. A survey questionnaire was carried out to find how and to what extent available software are being used in Bangladesh for this purpose. Opinion, views, expectations of architects from leading architectural firms of Bangladesh were studied to understand the future prospect of this field in Bangladesh.
series	CAADRIA
email
last changed	2022/06/07 07:54

_id	cf2005_1_64_168
id	cf2005_1_64_168
authors	ACHTEN Henri
year	2005
title	Resolving some Ambiguities in Real-time Design Drawing Recognition by means of a Decision Tree for Agents
source	Computer Aided Architectural Design Futures 2005 [Proceedings of the 11th International Conference on Computer Aided Architectural Design Futures / ISBN 1-4020-3460-1] Vienna (Austria) 20–22 June 2005, pp. 311-320
summary	In this paper, we present a theoretical study on automated understanding of the design drawing. This can lead to design support through the natural interface of sketching. In earlier work, 24 plan-based conventions of depiction have been identified, such as grid, zone, axial system, contour, and element vocabulary. These are termed graphic units. Graphic units form a good basis for recognition of drawings as they combine shape with meaning. We present some of the theoretical questions that have to be resolved before an implementation can be made. The contribution of this paper is: (i) identification of domain knowledge which is necessary for recognition; (ii) outlining combined strategy of multi-agent systems and online recognition; (iii) functional structure for agents and their organisation to converge on sketch recognition.
keywords	multi-agent system, decision tree, pattern recognition, sketch
series	CAAD Futures
email
last changed	2006/11/07 07:27

For more results click below: