Cumincad : CUMINCAD Papers : Search Results

CumInCAD is a Cumulative Index about publications in Computer Aided Architectural Design
supported by the sibling associations ACADIA, CAADRIA, eCAADe, SIGraDi, ASCAAD and CAAD futures

PDF papers
References

Hits 1 to 20 of 559

Reformat results as: short short into frame detailed detailed into frame

_id	2005_331
id	2005_331
authors	Al-Douri, Firas A., Clayton, Mark J. and Abrams, Robin F.
year	2005
title	The Impact of 3D Digital Modeling on the 3D Design Aspects in Urban Design Plans
doi	https://doi.org/10.52842/conf.ecaade.2005.331
source	Digital Design: The Quest for New Paradigms [23nd eCAADe Conference Proceedings / ISBN 0-9541183-3-2] Lisbon (Portugal) 21-24 September 2005, pp. 331-340
summary	Some experts suggest that urban design plans in US cities may lack adequate coverage of the three-dimensional design aspects of the built environment. 3D digital models may help designers visualize and interact with design alternatives, large urban data sets, and 3D information more effectively, thus correcting this problem. Case studies of recent urban design plans that have used 3D digital models may indicate whether these technologies can increase the quality of the plan. This research discusses the role 3D urban models can play in supporting designers in addressing the 3D design aspects. A literature review focused on reviewing secondary sources to construct or adopt theoretical propositions against which the empirical data can be compared and contrasted. A case study involved investigating the methods with which 3D models have been used in developing a selected urban design plan. The content analysis of the case study refuted the premise that the plan would inadequately address 3D aspects and utilize 3D information, and indicated an effective usage of 3D modeling to analyze and represent most of the 3D and 2D information elements and issues. The results are consistent with a hypothesis that the effective usage of 3D modeling would result in the effective coverage of 3D information and issues. The effective usage of the model’s functionalities has improved the quality of the decision-making process through improving designers’ cognitive capabilities and providing a platform for communicating design ideas among and across design teams.
keywords	3D Modeling; Urban Design Plans; Digital Models; 3D Design Aspects
series	eCAADe
email
last changed	2022/06/07 07:54

_id	cf2011_p051
id	cf2011_p051
authors	Cote, Pierre; Mohamed-Ahmed Ashraf, Tremblay Sebastien
year	2011
title	A Quantitative Method to Compare the Impact of Design Mediums on the Architectural Ideation Process.
source	Computer Aided Architectural Design Futures 2011 [Proceedings of the 14th International Conference on Computer Aided Architectural Design Futures / ISBN 9782874561429] Liege (Belgium) 4-8 July 2011, pp. 539-556.
summary	If we compare the architectural design process to a black box system, we can assume that we now know quite well both inputs and outputs of the system. Indeed, everything about the early project either feasibility studies, programming, context integration, site analysis (urban, rural or natural), as well as the integration of participants in a collaborative process can all be considered to initiate and sustain the architectural design and ideation process. Similarly, outputs from that process are also, and to some extent, well known and identifiable. We are referring here, among others, to the project representations or even to the concrete building construction and its post-evaluation. But what about the black box itself that produces the ideation. This is the question that attempts to answer the research. Currently, very few research works linger to identify how the human brain accomplishes those tasks; how to identify the cognitive functions that are playing this role; to what extent they operate and complement each other, and among other things, whether there possibly a chain of causality between these functions. Therefore, this study proposes to define a model that reflects the activity of the black box based on the cognitive activity of the human brain. From an extensive literature review, two cognitive functions have been identified and are investigated to account for some of the complex cognitive activity that occurs during a design process, namely the mental workload and mental imagery. These two variables are measured quantitatively in the context of real design task. Essentially, the mental load is measured using a Bakan's test and the mental imagery with eyes tracking. The statistical software G-Power was used to identify the necessary subject number to obtain for significant variance and correlation result analysis. Thus, in the context of an exploratory research, to ensure effective sample of 0.25 and a statistical power of 0.80, 32 participants are needed. All these participants are students from 3rd, 4th or 5th grade in architecture. They are also very familiar with the architectural design process and the design mediums used, i.e., analog model, freehand drawing and CAD software, SketchUp. In three experimental sessions, participants were asked to design three different projects, namely, a bus shelter, a recycling station and a public toilet. These projects were selected and defined for their complexity similarity, taking into account the available time of 22 minutes, using all three mediums of design, and this in a randomly manner to avoid the order effect. To analyze the two cognitive functions (mental load and mental imagery), two instruments are used. Mental imagery is measured using eye movement tracking with monitoring and quantitative analysis of scan paths and the resulting number and duration of participant eye fixations (Johansson et al, 2005). The mental workload is measured using the performance of a modality hearing secondary task inspired by Bakan'sworks (Bakan et al.; 1963). Each of these three experimental sessions, lasting 90 minutes, was composed of two phases: 1. After calibrating the glasses for eye movement, the subject had to exercise freely for 3 minutes while wearing the glasses and headphones (Bakan task) to get use to the wearing hardware. Then, after reading the guidelines and criteria for the design project (¬± 5 minutes), he had 22 minutes to execute the design task on a drawing table allowing an upright posture. Once the task is completed, the subject had to take the NASA TLX Test, on the assessment of mental load (¬± 5 minutes) and a written post-experimental questionnaire on his impressions of the experiment (¬± 10 minutes). 2. After a break of 5-10 minutes, the participant answered a psychometric test, which is different for each session. These tests (¬± 20 minutes) are administered in the same order to each participant. Thus, in the first experimental session, the subject had to take the psychometric test from Ekstrom et al. (1978), on spatial performance (Factor-Referenced Cognitive Tests Kit). During the second session, the cognitive style is evaluated using Oltman's test (1971). Finally, in the third and final session, participant creativity is evaluated using Delis-Kaplan test (D-KEFS), Delis et al. (2001). Thus, this study will present the first results of quantitative measures to establish and validate the proposed model. Furthermore, the paper will also discuss the relevance of the proposed approach, considering that currently teaching of ideation in ours schools of architecture in North America is essentially done in a holistic manner through the architectural project.
keywords	design, ideation process, mental workload, mental imagery, quantitative mesure
series	CAAD Futures
email
last changed	2012/02/11 19:21

_id	2005_383
id	2005_383
authors	Ebert, Oliver, Schoenemann, Patrick and Lenhart, Michael
year	2005
title	Cityscape Computing System
doi	https://doi.org/10.52842/conf.ecaade.2005.383
source	Digital Design: The Quest for New Paradigms [23nd eCAADe Conference Proceedings / ISBN 0-9541183-3-2] Lisbon (Portugal) 21-24 September 2005, pp. 383-389
summary	The central feature of the project is the development of a computer and its interfaces to simulate urban space and, in the context of an intermedia city tour, to allow citizens to creatively influence their urban space by manipulating media structures at chosen points throughout the city. A master plan is set up to re-cultivate public spaces and points of architectural focus. The city reacts interactively to the commands. A dialog is created between user and public space. The tour route is an open structure which can be expanded at any time. Via interfaces the user activates a reaction in the real city by making changes to the virtual model. This results in a dynamic space, a communication based on the results of this transformation. The user interface allows an information transfer between real people and virtual space. Virtual reality then reacts to the input by transferring that information back to reality. The direct influence on the architecture is effected by a media-transformer. It projects an additional perception level on to reality while monitoring the data via various analysis interfaces.
keywords	Interactive Urbanism; Media Installation; Human-Computer-Interaction
series	eCAADe
email
last changed	2022/06/07 07:55

_id	2005_467
id	2005_467
authors	Guéna, François
year	2005
title	Assisting 3D Modeling from Documents
doi	https://doi.org/10.52842/conf.ecaade.2005.467
source	Digital Design: The Quest for New Paradigms [23nd eCAADe Conference Proceedings / ISBN 0-9541183-3-2] Lisbon (Portugal) 21-24 September 2005, pp. 467-476
summary	This paper presents research in computer modeling that ARIAM team of the school of architecture of Paris La Villette has been developing for several years. One of the aims of this research group is to develop computer systems that assist architects in modeling existing buildings or monuments from heterogeneous documents or data as drawings plans, sections, photos, measures taken on site etc. In spite of advances in computer recognition it’s a long way to have a system that could automatically recognize, from any bitmap document or photo, relevant architectural objects and automatically build the model these documents represent. However, if we could define a knowledge base about a particular domain, it would be possible to develop a system that could interpret specific documents that represent some kind of building or monuments. But, even in such limited domain, it is difficult to build an exhaustive knowledge base and user-interactions are generally required. We argue that a user could mark relevant information on the documents and thus facilitate the process of interpreting. The system we propose has three components: a graphical user interaction tool, an analyzer of documents and user interactions, and a generative tool that produces the required model. As an illustration, the paper presents a system we have developed which assists an architect in modeling a 3D mesh of gothic vaults for a finite elements analysis.
keywords	3D Modeling; Restitution; Knowledge Base System; Meshing; Gothic Vaults
series	eCAADe
email
last changed	2022/06/07 07:50

_id	cf2005_2_61_192
id	cf2005_2_61_192
authors	HOLZER Dominik, TANG Jiwu, XIE Mik2 and BURRY Mark
year	2005
title	Design Using Evolutionary Optimisation and Associative Geometry
source	Learning from the Past a Foundation for the Future [Special publication of papers presented at the CAAD futures 2005 conference held at the Vienna University of Technology / ISBN 3-85437-276-0], Vienna (Austria) 20-22 June 2005, pp. 243-254
summary	This paper describes the usage of parametric design and evolutionary optimisation techniques in architect-engineer collaborations. It discusses the apparent challenges in setting up a trans-disciplinary working-platform that cuts across profession-specific boundaries and negotiates between the otherwise distinct work-methodologies through the use of intelligent CAAD applications. Two approaches to architectural form finding have been combined in this research. The first, parametric design, uses a proprietary package as a key element to the organisation and reorganisation of architectural design. By doing so, it is providing it with intrinsic flexibility allowing designers to go beyond form and accommodate performance data for versioning. The second, ESO (Evolutionary Structural Optimisation), is an engineering tool based on the use of finite element analysis (FEA) capable of optimising the formal geometry of an object to obtain minimum volume under even stress-distribution through an iterative design process. In undertaking this research it became apparent that different levels of resolution need to be addressed in the form-finding process in order to investigate the full potential of the interactive use of parametric design and evolutionary optimisation. The case studies reflect this diversity and demonstrate more successes, limitations and future challenges within the transdisciplinary, collaborative effort.
keywords	associative geometry, evolutionary structural optimisation, architect engineer collaboration, finite element analysis
series	CAAD Futures
email
last changed	2005/05/05 07:06

_id	2005_245
id	2005_245
authors	Lyon, Eduardo
year	2005
title	Design for Manufacturing in Architecture
doi	https://doi.org/10.52842/conf.ecaade.2005.245
source	Digital Design: The Quest for New Paradigms [23nd eCAADe Conference Proceedings / ISBN 0-9541183-3-2] Lisbon (Portugal) 21-24 September 2005, pp. 245-252
summary	This paper explores new ways to integrate manufacturing processes information in to design phases. Through the analysis of related fields and looking at the relations between its design methods and production processes, we analyze design processes and design representations that already have embedded in them specific ways to materialize through production the artifacts they define. Subsequently, we explore curved surface fabrication using cutting and bending technologies. As a summary, we conceptualize from this top-down development approach to design a framework that integrates design and construction in architecture, based on three possible applications fields: - Design processes improvement - Building production process improvement - CAD-CAM Tools development.
keywords	Design Computing, Design Cognition, Digital Manufacturing
series	eCAADe
email
last changed	2022/06/07 07:59

_id	sigradi2005_120
id	sigradi2005_120
authors	Lyon, Eduardo; Charles Eastman
year	2005
title	Design for manufacturing in architecture: mapping between the design and fabrication of curved surfaces
source	SIGraDi 2005 - [Proceedings of the 9th Iberoamerican Congress of Digital Graphics] Lima - Peru 21-24 november 2005, vol. 1, pp. 120-125
summary	This paper explores new ways to integrate manufacturing processes information in to design phases. Through the analysis of related fields and looking at the relations between its design methods and production processes, we analyze design processes and design representations that already have embedded in them specific ways to materialize through production the artifacts they define. Subsequently, we explore curved surface fabrication using cutting and bending technologies. As a summary, we conceptualize from this top-down development approach to design a framework that integrates design and construction in architecture, based on three possible applications fields: 1.) Design processes improvement; 2.) Building production process improvement; 3.) CAD-CAM Tools development. [Full paper in Spanish]
series	SIGRADI
email
last changed	2016/03/10 09:55

_id	2005_797
id	2005_797
authors	Petzold, Frank and Donath, Dirk
year	2005
title	Tailor-made: Adapting and Extending CA(A)Dsystems
doi	https://doi.org/10.52842/conf.ecaade.2005.797
source	Digital Design: The Quest for New Paradigms [23nd eCAADe Conference Proceedings / ISBN 0-9541183-3-2] Lisbon (Portugal) 21-24 September 2005, pp. 797-803
summary	CA(A)D systems are nowadays a part of everyday architectural practice and have completely replaced drawing with pen and T-square. The standard functions of such systems are (usually) sufficient for the everyday needs of practical work. The question is: can CA(A)D systems be adapted to improve work efficiency for specific users or applications such as those of the architect? Most current CA(A)D systems already provide some level of support for individual adaptation however these are rarely exploited by the end users. This paper discusses the teaching of skills for adapting and extending existing CA(A)D systems in current architectural education. In addition to the teaching of programming and operational skills, the course also examines the critical examination of CA(A)D systems and the formulation of user requirements (analysis), the search for existing solutions, functions or extensions (research) and the technical adaptation or extension of the system (software development). Using examples from current coursework, the paper illustrates both process and results of teaching practice.
keywords	Digital Design Education, 2D Representation, Design Process, 3D Modeling, Education in CAAD
series	eCAADe
email
last changed	2022/06/07 08:00

_id	caadria2005_a_8a_c
id	caadria2005_a_8a_c
authors	Ruei-Wen Tsai, Teng-Wen Chang
year	2005
title	Land forming while you are on site
doi	https://doi.org/10.52842/conf.caadria.2005.387
source	CAADRIA 2005 [Proceedings of the 10th International Conference on Computer Aided Architectural Design Research in Asia / ISBN 89-7141-648-3] New Delhi (India) 28-30 April 2005, vol. 1, pp. 387-397
summary	In landscape architecture design, land forming is the key to trigger many design concepts. However, the design media we currently used doesn’t provide suitable data or better visual feedback to designers when they are on site. In this paper, we develop a framework as well as a ubiquitous device called MODA comprised of five components. They are sensors, representation, display/viewing, motion and control that result from behaviors observation and analysis. According to the framework, a practical example of landform design is conducted and examined with one version of MODA combining both hardware and software.
series	CAADRIA
email
last changed	2022/06/07 07:56

_id	sigradi2006_e034d
id	sigradi2006_e034d
authors	Ryan, Rachel and Donn, Michael
year	2006
title	A 3D, interactive, multilayered, web-enabled model as a tool for multiple sets of end user groups: A case study and end user analysis
source	SIGraDi 2006 - [Proceedings of the 10th Iberoamerican Congress of Digital Graphics] Santiago de Chile - Chile 21-23 November 2006, pp. 392-396
summary	This research undertakes a case study involving focus groups of potential end users, to identify how a successful digital tool could be created using new and emerging technologies, to accommodate the multiple needs of these end users. 2005 saw the completion of a research paper, which proposed that a single, 3 dimensional digital model of a city forming a core for many different information systems, is a better approach to the needs of the city than many individual models optimised for each information system. The case for the single 3D model was evaluated through the research, development, delivery and analysis of a prototype 3 Dimensional model of Wellington City, New Zealand, presenting different ‘views’ of information in Wellington: a rendered visualisation in an animated “walkthrough”; the impact of planning constraints on daylight; interactive “plots” of property values. The development and delivery of the prototype model was analysed in regards to how complex, costly and time consuming it may be to exploit one base model for several purposes; and also therefore how beneficial, affordable and potentially successful a single model may be. The prototype model was created to test the idea, and therefore provided conclusions based on a limited feasibility analysis - with four potential information layers modelled and two potential delivery methods tested. The prototype model and user analysis results were presented in a research report that suggested further research and development of a single model could be very beneficial: Positive feedback from potential end users and data providers, and examples of potential data mining opportunities forming the basis of the need for continued research. 2006 sees the research continue as an 18 month research project in conjunction with an industry partner, Terralink International, (http://www.terralink.co.nz/). Terralink International Limited provides GIS and mapping solutions which according to their web site: “enable better business management.” The company maintains a national resource of “imagery, cartography, and spatial databases” and provides consultancy services linking these to company databases through GIS systems. The research investigates the potential for 3 dimensional, interactive, multilayered models to enhance delivery of information to multiple end user groups. The research method uses functional prototypes in end-user focus group workshops. These workshops, consisting of a combination of presentations, hands on interactive examples, group discussions, and individual feedback surveys, aim to establish how a tool might best be developed to communicate to a wide range of end users. The means of delivery whether a stand alone tool or web-based is a key element of the user group workshop assessment process. Note: The submission of the prototype tool (via video or interactive media) would greatly increase the effectiveness of the research presentation. Ability to include such media would be greatly appreciated.
keywords	multilayered; 3D; end users; interactive; web-enabled
series	SIGRADI
email
last changed	2016/03/10 09:59

_id	caadria2005_b_4c_d
id	caadria2005_b_4c_d
authors	Sambit Datta
year	2005
title	On Recovering the Surface Geometry of Temple Superstructures
doi	https://doi.org/10.52842/conf.caadria.2005.253
source	CAADRIA 2005 [Proceedings of the 10th International Conference on Computer Aided Architectural Design Research in Asia / ISBN 89-7141-648-3] New Delhi (India) 28-30 April 2005, vol. 2, pp. 253-258
summary	The application of computational techniques to the analysis of heritage artifacts enables scholars to bring together diverse fragments of surviving evidence, construe “best-fit” strategies and unearth implicit or hidden relationships. This paper reports a hybrid approach for recovering the surface geometry of temples. The approach combines physical measurements, architectural photogrammetry and generative rules to create a parametric model of the surface. The computing of surface geometry is broken into three parts, a global model governing the overall form of the superstructure, local models governing the geometry of individual motifs and finally the global and local models are combined into a single geometry. In this paper, the technique for recovering surface geometry is applied to a tenth century stone superstructure: the temple of Ranakdevi at Wadhwan in Western India. The global model of the superstructure and the local model of one individual motif are presented.
series	CAADRIA
email
last changed	2022/06/07 07:56

_id	2005_751
id	2005_751
authors	Szalapaj, Peter
year	2005
title	The Digital Design Process in Contemporary Architectural Practice
doi	https://doi.org/10.52842/conf.ecaade.2005.751
source	Digital Design: The Quest for New Paradigms [23nd eCAADe Conference Proceedings / ISBN 0-9541183-3-2] Lisbon (Portugal) 21-24 September 2005, pp. 751-759
summary	There is an increasing trend in contemporary architectural projects towards dependence upon digital processes for their organisation and technical evaluation of a range of design criteria. Digital representations are central not only to form generation and structural analysis, but also to the integration of fabrication and construction directly with the earlier design stages. It is important to bear in mind, however, that digital technology is only a means to an end which is the design process itself. Each technique of digital representation and analysis brings advantages and disadvantages to this process, and should therefore be described in these terms. It is becoming increasingly feasible to develop a rapid succession of distinct digital models, both geometric and dynamic, in early design stages. These can be tested and evaluated with respect to a range of analytical criteria, and the results of these analyses can affect further model development thus forming a cyclical process of 3-D digital model generation.
keywords	Dynamic Modelling, Geometric Modelling, Surface Modelling, Parametric Representation, Digital Fabrication
series	eCAADe
email
last changed	2022/06/07 07:56

_id	caadria2005_a_7c_c
id	caadria2005_a_7c_c
authors	Yukiko Nomura, Tatsuya Kishimoto
year	2005
title	Visualization of Tourists’ Behavior and Activity Using GPS and GIS in Kamakura City
doi	https://doi.org/10.52842/conf.caadria.2005.320
source	CAADRIA 2005 [Proceedings of the 10th International Conference on Computer Aided Architectural Design Research in Asia / ISBN 89-7141-648-3] New Delhi (India) 28-30 April 2005, vol. 1, pp. 320-327
summary	We suggest a new method using GPS to investigate human activities in an urban area. The time and space data of tourists’ migration in a specific tourist area from GPS are focused on. The data are visualized on GIS so that “Nigiwai” activity can be analyzed including notion of time. From the analysis, places that pedestrians tend to stay longer or move slower, and those that they aren’t, are found. As a case study, we analyze activity in Kamakura City using the suggested method, and examine the possibilities of application for the urban space design.
series	CAADRIA
email
last changed	2022/06/07 07:57

_id	cf2005_2_63_81
id	cf2005_2_63_81
authors	McMEEL Dermott, COYNE Richard and LEE John
year	2005
title	Talking Dirty: Formal and Informal Communication in Construction Projects
source	Learning from the Past a Foundation for the Future [Special publication of papers presented at the CAAD futures 2005 conference held at the Vienna University of Technology / ISBN 3-85437-276-0], Vienna (Austria) 20-22 June 2005, pp. 265-274
summary	We analyse the emergence and use of formal and informal communication tools in group working to aid in understanding the complexity of construction projects. Our test case is the design and build of an interactive digital installation in an exhibition space, involving students. After the project we conducted focus group studies to elicit insights into the effective use of the digital communications available for the project. We recount key insights from the study and examine how digital messaging devices are contributing to or hindering creative discussion. Whereas the construction process is concerned with the removal of dirt and re-ordering, in this paper we reflect on construction’s ritualistic, contractual and unauthorized aspects, and dirt’s role within them. We draw on Bakhtin’s theories of the carnival in exploring ritual, and the mixing of the un-sanctioned (rumour) with the official (contractual). How does dirt impinge on issues of communication, open discussion, and the move towards “partnering” in construction practice? We conjecture that while physical dirt might be unpleasant, the removal of other forms of metaphorical dirt hampers construction as an efficient and creative process.
keywords	communications, technology, construction
series	CAAD Futures
email
last changed	2005/05/05 07:06

_id	ecaade2016_154
id	ecaade2016_154
authors	Ozer, Derya Gulec and Nagakura, Takehiko
year	2016
title	Simplifying Architectural Heritage Visualization - AUGMENTEDparion
doi	https://doi.org/10.52842/conf.ecaade.2016.2.521
source	Herneoja, Aulikki; Toni Österlund and Piia Markkanen (eds.), Complexity & Simplicity - Proceedings of the 34th eCAADe Conference - Volume 2, University of Oulu, Oulu, Finland, 22-26 August 2016, pp. 521-528
summary	Among other historical artifacts, architectural heritage is the most difficult to present in museums. There is a need for a high-tech visualization of cultural heritage since it is important to visualize, share and analyze data for stakeholders such as historians, archaeologists, architects and tourists. This study aims to represent architectural heritage in terms of photogrammetry and AR methods for the Parion Theater, Biga, Turkey, dates back to 1st-2nd century A.D. and has been under excavation since 2005. The study uses MULTIRAMA, a method previously developed by ARC Team (MIT) in 2013, which aims to represent the "unseen" to such users by visualising and documenting via an app. The method supports architectural heritage representation via the processes of, i) documentation, ii) data process and modeling, and iii) presentation. This holistic and low cost approach will focus on the problem of visualizing the digital architectural heritage, and led light to future projects of a historical visualization database throughout Turkey.
wos	WOS:000402064400052
keywords	Augmented Reality (AR); Cultural Heritage; Photogrammetry; Parion
series	eCAADe
email
last changed	2022/06/07 08:00

_id	caadria2005_b_4a_d
id	caadria2005_b_4a_d
authors	T. Thurow, D. Donath
year	2005
title	Get the Surveying Building Data Into the CAAD System: A Realistic Approach for the Practice
doi	https://doi.org/10.52842/conf.caadria.2005.171
source	CAADRIA 2005 [Proceedings of the 10th International Conference on Computer Aided Architectural Design Research in Asia / ISBN 89-7141-648-3] New Delhi (India) 28-30 April 2005, vol. 2, pp. 171-180
summary	The digital support of the planning process is a currently a central focus of our research and will be presented and discussed in this paper. Concepts and prototypes for the computer aided support of the planning process are being developed as part of a special research project “Construction and materials for the renovation of buildings”. The paper examines the flexible combination of different surveying techniques and geometric abstractions achieved with the help of geodesic computational adjustment methods. Selected aspects have been implemented and investigated as prototypes and the prototypes are described and discussed.
series	CAADRIA
email
last changed	2022/06/07 07:56

_id	sigradi2005_478
id	sigradi2005_478
authors	Abdelhameed, Wael
year	2005
title	Digital-Media Impact on the Decision-Making Capability of Architects
source	SIGraDi 2005 - [Proceedings of the 9th Iberoamerican Congress of Digital Graphics] Lima - Peru 21-24 november 2005, vol. 1, pp. 478-482
summary	The underlying assumption of the research is that media the representational environments of architects’ design thoughts, have impact on the way by which architects practice design and develop their design capabilities. This research aims at exploring the interrelationship between the media used by the architect and the development that might occur in the Decision-Making capability.The role of digital media in the architectural design process has become exploration and suggestion of what is being made, rather than, illustration of what has been already made. Depending on primary data (a global questionnaire) and secondary data (synthesis of the previous research), the results have substantiated the observation that there has been positive impact of digital media settings on the Decision-Making capability of architects. The analysis reveals some detailed findings, which provide a better understanding of the subject matter.
series	SIGRADI
email
last changed	2016/03/10 09:47

_id	ascaad2014_023
id	ascaad2014_023
authors	Al-Maiyah, Sura and Hisham Elkadi
year	2014
title	Assessing the Use of Advanced Daylight Simulation Modelling Tools in Enhancing the Student Learning Experience
source	Digital Crafting [7th International Conference Proceedings of the Arab Society for Computer Aided Architectural Design (ASCAAD 2014 / ISBN 978-603-90142-5-6], Jeddah (Kingdom of Saudi Arabia), 31 March - 3 April 2014, pp. 303-313
summary	In architecture schools, where the ‘studio culture’ lies at the heart of students’ learning, taught courses, particularly technology ones, are often seen as secondary or supplementary units. Successful delivery of such courses, where students can act effectively, be motivated and engaged, is a rather demanding task requiring careful planning and the use of various teaching styles. A recent challenge that faces architecture education today, and subsequently influences the way technology courses are being designed, is the growing trend in practice towards environmentally responsive design and the need for graduates with new skills in sustainable construction and urban ecology (HEFCE’s consultation document, 2005). This article presents the role of innovative simulation modelling tools in the enhancement of the student learning experience and professional development. Reference is made to a teaching practice that has recently been applied at Portsmouth School of Architecture in the United Kingdom and piloted at Deakin University in Australia. The work focuses on the structure and delivery of one of the two main technology units in the second year architecture programme that underwent two main phases of revision during the academic years 2009/10 and 2010/11. The article examines the inclusion of advanced daylight simulation modelling tools in the unit programme, and measures the effectiveness of enhancing its delivery as a key component of the curriculum on the student learning experience. A main objective of the work was to explain whether or not the introduction of a simulation modelling component, and the later improvement of its integration with the course programme and assessment, has contributed to a better learning experience and level of engagement. Student feedback and the grade distribution pattern over the last three academic years were collected and analyzed. The analysis of student feedback on the revised modelling component showed a positive influence on the learning experience and level of satisfaction and engagement. An improvement in student performance was also recorded over the last two academic years and following the implementation of new assessment design.
series	ASCAAD
email
last changed	2016/02/15 13:09

_id	sigradi2012_30
id	sigradi2012_30
authors	Angeluzzi, Gustavo; Hanns, Daniela Kutschat
year	2012
title	Um levantamento de requisitos gerais para o desenvolvimento e posicionamento de DOOTERS – um aplicativo lúdico de listas de tarefas para iPhone [A survey of general requirements for developing and positioning DOOTERS - a to-do list application for iPhone]
source	SIGraDi 2012 [Proceedings of the 16th Iberoamerican Congress of Digital Graphics] Brasil - Fortaleza 13-16 November 2012, pp. 191-195
summary	DOOTERS is a to-do list application for iPhone which entertains and motivates the user to get things done. It was developed based on requirements obtained trough: 1. the study of several personal information organizing methods (Covey, 1989; Allen, 2005; Foster, 2006); 2. answers to a task lists user focused questionnaire; 3. observation of to-do list users while creating lists and organizing tasks; 4. comparison of digital and non-digital task list media (paper, computer and mobile device); 5. analysis of profiles, behaviors and to-do list applications for iPhone. In this paper, the authors present the process of obtaining requirements for developing and positioning DOOTERS.
keywords	information and interface design, requirements, to-do list application, iPhone, DOOTERS
series	SIGRADI
email
last changed	2016/03/10 09:47

_id	2005_163
id	2005_163
authors	Balakrishnan, Bimal, Kalisperis, Loukas N. and Muramoto, Katsuhiko
year	2005
title	Evaluating Workflow and Modeling Strategies of Pen Computing in the Beginning Architectural Design Studio
doi	https://doi.org/10.52842/conf.ecaade.2005.163
source	Digital Design: The Quest for New Paradigms [23nd eCAADe Conference Proceedings / ISBN 0-9541183-3-2] Lisbon (Portugal) 21-24 September 2005, pp. 163-170
summary	This paper investigates the impact of Tablet PCs on the workflow in an undergraduate design studio. We examined how well the students adapted the Tablet PC into their day-to-day design work and evaluated the appropriateness of the Tablet PC as a common digital tool used in an architectural design studio. This research involved observation of student behavior during the semester and the conducting of a survey measuring various aspects of the students’ use of the computers. A more specific goal was to compare the effectiveness of the pen versus the mouse as input devices for a three-dimensional modeling task in terms of both task time and strategies. Our assumption was that a change in input mode would affect the strategies and the performance. The results of a within-subjects, repeated-measures experiment carried out to elicit differences in input devices are discussed.
keywords	Digital Design Education; Human-Computer Interaction; 3D Modeling; Pen Computing; Task Analysis
series	eCAADe
email
last changed	2022/06/07 07:54

For more results click below: