Cumincad : CUMINCAD Papers : Search Results

CumInCAD is a Cumulative Index about publications in Computer Aided Architectural Design
supported by the sibling associations ACADIA, CAADRIA, eCAADe, SIGraDi, ASCAAD and CAAD futures

PDF papers
References

Hits 1 to 20 of 456

Reformat results as: short short into frame detailed detailed into frame

_id	caadria2005_b_5c_b
id	caadria2005_b_5c_b
authors	Martin Tamke
year	2005
title	Crossing The Media
doi	https://doi.org/10.52842/conf.caadria.2005.364
source	CAADRIA 2005 [Proceedings of the 10th International Conference on Computer Aided Architectural Design Research in Asia / ISBN 89-7141-648-3] New Delhi (India) 28-30 April 2005, vol. 2, pp. 364-374
summary	An open-ended, diversified and critical approach of architectural design, using different form of ideas representation might offer best chances to gain new spatial solutions. Today’s most forward architects and designer are aware of this and make full use of physical and digital media during the process of design. During the summer term 2004 the experiment ‘Crossing the Media’ took place at the Technical University of Braunschweig. The main goal of this practical oriented seminar has been the exploration of the interface between analogue and digital Media within the design process. Both techniques, analogue and digital, were used in an experimental way and their interaction and adaptability in the field of architecture was analyzed. The work examines the possibility of a consistent integration of digital and physical representation in a design process and the individual benefits of each. In order to achieve this, we made up a stringent line of digital-analogue and analogue-digital (DA-AD) Technologies for our design experiment. During the examination we focused especially on the creative potential of the techniques used, their interaction and adaptability in the field of architecture. Hence one of the goals of the occupation with the digital analogue interfaces was the examination of the emerging shift within the structure during the process, the imprints of technology. This paper describes the workflow and tools that were used, our practical experiences with analogue digital interface and the emerging questions and impulses to architects future work and theory. The discovered limitations and consequences of interfaces between the analogue and digital realm of design and their creative chances will be revealed. We share results which we think are helpful to others, and we highlight areas where further research is necessary.
series	CAADRIA
email
last changed	2022/06/07 07:59

_id	sigradi2005_459
id	sigradi2005_459
authors	Monrás Charles, María José; Sebastián Graf Seballos
year	2005
title	Architecture now! = contemporary imagination + new information technologies
source	SIGraDi 2005 - [Proceedings of the 9th Iberoamerican Congress of Digital Graphics] Lima - Peru 21-24 november 2005, vol. 1, pp. 459-462
summary	The development of the architectural project is conditioned and determined by the design process, in which the operative modalities have big influence. That is why we can dare say, that the use of digital media and new information technologies in the architectural design process open the way to a “new architecture”, an architecture that represents the Contemporary Imagination. A change has taken place in the traditional patterns of Architecture, from the way of thinking and conceiving a project to its representation and later materialization. This “Contemporary Architecture”, founded in the circumstances of contemporary society, is represented by three main architectural consequences: 1. The expansion of the Spatial Imagination; 2. The break regarding a lineal or hierarchical design process; 3. The introduction of different disciplines to the design process, relating the design immediately with its realization. [Full paper in Spanish]
series	SIGRADI
last changed	2016/03/10 09:55

_id	2005_415
id	2005_415
authors	Tramontano, Marcelo and Mônaco dos Santos, Denise
year	2005
title	Online_communities
doi	https://doi.org/10.52842/conf.ecaade.2005.415
source	Digital Design: The Quest for New Paradigms [23nd eCAADe Conference Proceedings / ISBN 0-9541183-3-2] Lisbon (Portugal) 21-24 September 2005, pp. 415-423
summary	Research on contemporary habitation spaces is directly related to the study of the relationship between new media and everyday life. This paper presents ongoing in-depth research which intends to discuss these relationships in different ways on a conceptual basis. A collaborative multi-users interface is being specially designed, supported by different kinds of electronic equipment. Furthermore, the project’s objective is to analyze how these information and communication technologies are to be used, as well as their impact on poor communities. As a hypothesis, our intention is to verify if the access to information will be able to broaden social interactions and improve new services which have been set up, in order to guarantee a better quality of life. Beyond being a conceptual approach, the study intends to present and examine facts obtained from intervening in a poor district in São Paulo city, Brazil. Using an existing public telecenter as an access provider to the internet, individual TV-connected set-top boxes in 220 apartments in a local social housing complex are being installed, enabling users to communicate through a collaborative multiusers digital interface. Adding a virtual instance to a geographically-based community, the aim of the project is to provide new possibilities to improve dialogue and debates, to encourage more income and cultural activities. It also intends to evaluate the effects of the technological mediation of social relationships, both inside and outside the community, as well as within the physical urban space such as in the dwellings. The results of this study will be useful in defining public policies to be implemented by the Sao Paulo Local Government. The work is being sponsored by FAPESP, which is the Sao Paulo State Funding Agencie, but also by public institutions, private partners and universities. Researchers involved belong to complementary fields such as architecture, urbanism, computer sciences, social sciences, psychology and electronic engineering.
keywords	Virtual Communities, Collaborative Networks, Digital Inclusion
series	eCAADe
email
last changed	2022/06/07 07:57

_id	caadria2005_a_7b_a
id	caadria2005_a_7b_a
authors	Abdullah, A.Q.M. ; Md. Emran Hossain, Md. Shabab Habib Khan
year	2005
title	Digital Perception, Development and Presentation in Architecture: a study of Bangladesh with global context
doi	https://doi.org/10.52842/conf.caadria.2005.255
source	CAADRIA 2005 [Proceedings of the 10th International Conference on Computer Aided Architectural Design Research in Asia / ISBN 89-7141-648-3] New Delhi (India) 28-30 April 2005, vol. 1, pp. 255-267
summary	In the recent past the computer has become an important tool in both the design and presentation media/method in architecture. In this paper digitalization in architectural practice and architectural education in both the global and Bangladesh contexts have been studied. A survey questionnaire was carried out to find how and to what extent available software are being used in Bangladesh for this purpose. Opinion, views, expectations of architects from leading architectural firms of Bangladesh were studied to understand the future prospect of this field in Bangladesh.
series	CAADRIA
email
last changed	2022/06/07 07:54

_id	2005_083
id	2005_083
authors	Agostinho, Francisco Santos
year	2005
title	Architecture as Drawing, Perception and Cognition
doi	https://doi.org/10.52842/conf.ecaade.2005.083
source	Digital Design: The Quest for New Paradigms [23nd eCAADe Conference Proceedings / ISBN 0-9541183-3-2] Lisbon (Portugal) 21-24 September 2005, pp. 83-90
summary	This work is about realizing that human perception is inherent to architecture. It is an asset and a trait subject to training and development in an empirical way, involving physical and manual action. It cannot be taught literally through convention and logic reasoning. It is a human achievement of great significance built on intellectual and scientific knowledge. It is something, being physical and empirical, that is supported on instrumental procedure. The computer, as a machine and an instrument, does not shorten the empirical experience of manipulation; on the contrary, it enhances J.J. Gibson’s findings about the perception of space in relation to eye and body movement. Being a cybernetic machine the computer may, and shall, evolve, and become perceptive. In order for that to happen, it is important to keep in mind the mechanism of human perception. Through producing a computerized model of a major architectural work, we develop natural knowledge about its physical features and the thought that lies underneath. To be able to use the computer as an instrument provides a user with explicit knowledge about its ways and mechanism that has to be made available. It involves training, which is to a great extent self-explanatory, and also explicit knowledge about the conventions that are being used, such as programming, reasoning and trigonometry.
keywords	Visualization; Environmental Simulation; Knowledge Modelling (KM); 3D Modeling
series	eCAADe
email
last changed	2022/06/07 07:54

_id	ascaad2014_023
id	ascaad2014_023
authors	Al-Maiyah, Sura and Hisham Elkadi
year	2014
title	Assessing the Use of Advanced Daylight Simulation Modelling Tools in Enhancing the Student Learning Experience
source	Digital Crafting [7th International Conference Proceedings of the Arab Society for Computer Aided Architectural Design (ASCAAD 2014 / ISBN 978-603-90142-5-6], Jeddah (Kingdom of Saudi Arabia), 31 March - 3 April 2014, pp. 303-313
summary	In architecture schools, where the ‘studio culture’ lies at the heart of students’ learning, taught courses, particularly technology ones, are often seen as secondary or supplementary units. Successful delivery of such courses, where students can act effectively, be motivated and engaged, is a rather demanding task requiring careful planning and the use of various teaching styles. A recent challenge that faces architecture education today, and subsequently influences the way technology courses are being designed, is the growing trend in practice towards environmentally responsive design and the need for graduates with new skills in sustainable construction and urban ecology (HEFCE’s consultation document, 2005). This article presents the role of innovative simulation modelling tools in the enhancement of the student learning experience and professional development. Reference is made to a teaching practice that has recently been applied at Portsmouth School of Architecture in the United Kingdom and piloted at Deakin University in Australia. The work focuses on the structure and delivery of one of the two main technology units in the second year architecture programme that underwent two main phases of revision during the academic years 2009/10 and 2010/11. The article examines the inclusion of advanced daylight simulation modelling tools in the unit programme, and measures the effectiveness of enhancing its delivery as a key component of the curriculum on the student learning experience. A main objective of the work was to explain whether or not the introduction of a simulation modelling component, and the later improvement of its integration with the course programme and assessment, has contributed to a better learning experience and level of engagement. Student feedback and the grade distribution pattern over the last three academic years were collected and analyzed. The analysis of student feedback on the revised modelling component showed a positive influence on the learning experience and level of satisfaction and engagement. An improvement in student performance was also recorded over the last two academic years and following the implementation of new assessment design.
series	ASCAAD
email
last changed	2016/02/15 13:09

_id	acadia05_012
id	acadia05_012
authors	Anshuman, Sachin
year	2005
title	Responsiveness and Social Expression; Seeking Human Embodiment in Intelligent Façades
doi	https://doi.org/10.52842/conf.acadia.2005.012
source	Smart Architecture: Integration of Digital and Building Technologies [Proceedings of the 2005 Annual Conference of the Association for Computer Aided Design In Architecture / ISBN 0-9772832-0-8] Savannah (Georgia) 13-16 October 2005, pp. 12-23
summary	This paper is based on a comparative analysis of some twenty-six intelligent building facades and sixteen large media-facades from a socio-psychological perspective. It is not difficult to observe how deployment of computational technologies have engendered new possibilities for architectural production to which surface-centeredness lies at that heart of spatial production during design, fabrication and envelope automation processes. While surfaces play a critical role in contemporary social production (information display, communication and interaction), it is important to understand how the relationships between augmented building surfaces and its subjects unfold. We target double-skin automated facades as a distinct field within building-services and automation industry, and discuss how the developments within this area are over-occupied with seamless climate control and energy efficiency themes, resulting into socially inert mechanical membranes. Our thesis is that at the core of the development of automated façade lies the industrial automation attitude that renders the eventual product socially less engaging and machinic. We illustrate examples of interactive media-façades to demonstrate how architects and interaction designers have used similar technology to turn building surfaces into socially engaging architectural elements. We seek opportunities to extend performative aspects of otherwise function driven double-skin façades for public expression, informal social engagement and context embodiment. Towards the end of the paper, we propose a conceptual model as a possible method to address the emergent issues. Through this paper we intend to bring forth emergent concerns to designing building membrane where technology and performance are addressed through a broader cultural position, establishing a continual dialogue between the surface, function and its larger human context.
series	ACADIA
email
last changed	2022/06/07 07:54

_id	2005_131
id	2005_131
authors	Bailey, Rohan
year	2005
title	Digital Tools for Design Learning
doi	https://doi.org/10.52842/conf.ecaade.2005.131
source	Digital Design: The Quest for New Paradigms [23nd eCAADe Conference Proceedings / ISBN 0-9541183-3-2] Lisbon (Portugal) 21-24 September 2005, pp. 131-138
summary	There is growing consensus among architectural critics and educators that there exists an increasing divide between the worlds of architectural education and practice. New social and cultural norms, new materials, and current global concerns, like sustainability, have largely influenced the need for an improved balance/integration between design theory and practice. This places schools of architecture around the world under pressure to provide their graduates with the requisite skills that support responsible design characterized by good design thinking strategies. The Caribbean School of Architecture, in addition to being affected by this predicament, has other pressures on its educational offerings. The region’s lack of resources and particular social issues mandates that graduates of the school adopt a responsible attitude towards design in the region. A positive attitude to such issues as sustainability, energy conservation and community will only come about through an effective transmission of particular architectural knowledge that is relevant to the region. The challenge (globally and in the Caribbean), therefore, is the provision of an innovative and effective way of supporting the student master dialogue in studio, facilitating the transfer of “practical, appropriate knowledge” needed by students to create safe, purposeful and responsible architecture. This paper exists within the research paradigm of providing digital teaching tools to beginning students of architecture. This digital research paradigm seeks to move digital technology (the computer) beyond functioning as an instrumental tool (in visualization, representation and fabrication) to becoming a “Socratic machine” that provides an appropriate environment for design learning. Research funds have been allocated to the author to research and develop the information component of the tool with special reference to the Caribbean. The paper will report on the results of prior investigations, describe the reaction and appreciation of the students and conclude with lessons learnt for the further development of the teaching tool.
keywords	Design Education, Digital Design, Teaching Tools
series	eCAADe
email
last changed	2022/06/07 07:54

_id	sigradi2005_225
id	sigradi2005_225
authors	Bianchi, Alejandra S.
year	2005
title	Education and innovation: present and future of teacher’s practice in digital graphic
source	SIGraDi 2005 - [Proceedings of the 9th Iberoamerican Congress of Digital Graphics] Lima - Peru 21-24 november 2005, vol. 1, pp. 225-229
summary	This is a qualitative research about the “educative training process” of Digital Graphic students, in the Architectural Department of Nordeste University- Argentina. The specific aim is “to know in depth the elements that influence in the educative training process in digital graphics”, to guide the propose of new teaching strategies to make better the teaching- learning process. The studied universe includes two architecture -students groups that are coursing first and second year of the career, since 2004. The first analysis categories, allow us to find out the meaning that pupils give to the facts, to build the training process dialectic. [Full paper in Spanish]
series	SIGRADI
email
last changed	2016/03/10 09:47

_id	sigradi2005_355
id	sigradi2005_355
authors	Breutmann, Bernd; Mónica Inés Fernández, Ricardo Piégari, Roberto Guerrero, Adriane Borda Almeida da Silva, Neusa Rodrigues Félix, Alfredo Pina, Lore Huizi, Francisco José Serón Arbeloa, Pedro Latorre Andrés, Carlos Vaz de Carvalho, Marcelo Payssé Alvarez, Juan Pablo Portillo Burghi
year	2005
title	Project “Network Alfa T-GAME L3: teaching computer graphics and multimedia, long-life learning” - Institutional and interdisciplinary outreach university services.
source	SIGraDi 2005 - [Proceedings of the 9th Iberoamerican Congress of Digital Graphics] Lima - Peru 21-24 november 2005, vol. 1, pp. 355-361
summary	The T-GAME L3 project intends to establish the possibility of cooperation within institutions focusing activities in the realm of continuous development in the area of Digital Graphics by making use: of new technologies, methods and learning processes related to half-time distance and total distance teaching. The programs offered will be customized to each particular country and academic environment by sharing the digital teaching resources of the network members. This will allow an academic program of formative continuity. Based on the seminar’s subject, our visualization sense will be a basic component for a massive training of an educational program, proposing a model of institutional outreach university service. This will allow for the presentation of contents oriented to distance learning in the field of Architecture. [Full paper in Spanish]
series	SIGRADI
email
last changed	2016/03/10 09:47

_id	2005_665
id	2005_665
authors	Brito, Tiago, Fonseca, Manuel J. and Jorge, Joaquim A.
year	2005
title	DecoSketch – Towards Calligraphic Approaches to Interior Design
doi	https://doi.org/10.52842/conf.ecaade.2005.665
source	Digital Design: The Quest for New Paradigms [23nd eCAADe Conference Proceedings / ISBN 0-9541183-3-2] Lisbon (Portugal) 21-24 September 2005, pp. 665-670
summary	Computer-Aided Design tools have long played an important role in architecture design. However, we need to go beyond direct manipulation to devise new tools that will expedite the interior design and decoration. Indeed, conventional CAD systems, while providing ever increasing functionality, do not provide equal support to the drafting and drawing tasks. This makes even the simplest drawings a complicated endeavor. Draftspeople struggle with different concepts that those learnt from their earlier days in school and have to think long and hard to translate familiar sequences of operations to commands which require navigating a dense jungle of menus. The term calligraphic interfaces was coined by us to designate a large family of applications organized around the drawing paradigm, using a digital stylus and a tablet-and-screen combination as seen most recently in Tablet PCs®. Using these, users can enter drawings in a natural manner, largely evocative of drafting techniques that were perfected for pencil-and-paper media. This paper presents a simple calligraphic interface to explore interior design literally from the ground up. The Decosketch application is a modeling and visualization tool structured around 2 _D architectural plants. Its purpose is to help architects or customers easily creating and navigating through house designs starting from the floorplan and moving to their three-dimensional representation. Moreover, both 2D and 3D representations can be independently edited, providing a natural interface that tries to adhere to well-known representations and idioms used by architects when drafting using pencil and paper.
series	eCAADe
email
last changed	2022/06/07 07:54

_id	sigradi2005_300
id	sigradi2005_300
authors	Cavieres, Andrés P.; Marcelo Quezada G.
year	2005
title	Analysis of the possibilities offered by the application of parametric modeling technologies in the design processes shared between architects and industrial designers: The prefabricated house case.
source	SIGraDi 2005 - [Proceedings of the 9th Iberoamerican Congress of Digital Graphics] Lima - Peru 21-24 november 2005, vol. 1, pp. 300-303
summary	Traditionally, the teaching of digital design systems has been focused on the operative learning of software. However, this almost exclusively technical approach has leaded to a partial view of these systems, as well suited platforms to exploration of project’s possibilities. Consequently their relevance as a base for project representation and therefore as a useful instrument for conceptual exploration for design and experimental research of their processes have been undervalued. On the other hand, this restrictive perspective results in an important waste of the teaching possibilities lying in CAD software related with interdisciplinary teamwork. The following academic experience obeys to a new insight of how to teach these tools, based upon problem solving in Design by interdisciplinary students work teams from Architecture and Industrial Design. In this bet, the learning process is flexible, shared and collaborative, according to the requirements of each project, powered by the commitment of facing common goals. [Full paper in Spanish]
series	SIGRADI
email
last changed	2016/03/10 09:48

_id	cf2005_2_32_203
id	cf2005_2_32_203
authors	CHASE Scott and AHMAD Sumbul
year	2005
title	Grammar Transformations: Using Composite Grammars to Understand Hybridity in Design
source	Learning from the Past a Foundation for the Future [Special publication of papers presented at the CAAD futures 2005 conference held at the Vienna University of Technology / ISBN 3-85437-276-0], Vienna (Austria) 20-22 June 2005, pp. 89-98
summary	Hybrid designs are those that develop from multiple sources. This paper presents the methodology of composite grammars, developed by merging multiple grammars, for the analysis of hybrid designs. The methodology is discussed with an example from Islamic architecture, which is known to have developed by borrowing from various sources. The methodology is seen to be useful for the analysis of the evolution of historic architecture, as well as for the development of new languages of designs.
keywords	shape grammars, generative design, historical analysis, Islamic architecture, hybridity
series	CAAD Futures
email
last changed	2005/05/05 07:06

_id	caadria2005_b_5c_c
id	caadria2005_b_5c_c
authors	Ching-Hui Huang
year	2005
title	Interactions between space and digital design media: A case study of physical space
doi	https://doi.org/10.52842/conf.caadria.2005.375
source	CAADRIA 2005 [Proceedings of the 10th International Conference on Computer Aided Architectural Design Research in Asia / ISBN 89-7141-648-3] New Delhi (India) 28-30 April 2005, vol. 2, pp. 375-381
summary	The rapid developments of digital design media have impacted many aspects of architecture design, such as design process, presentation and communication. This paper focuses on the study of interactions between physical space and digital design media, and proposes a preliminary interactive framework between them. This research proposes a preliminary sense-of-space oriented framework, which indicates the crucial interactive elements and properties of physical space and digital design media.
series	CAADRIA
email
last changed	2022/06/07 07:55

_id	caadria2006_597
id	caadria2006_597
authors	CHOR-KHENG LIM, CHING-SHUN TANG, WEI-YEN HSAO, JUNE-HAO HOU, YU-TUNG LIU
year	2006
title	NEW MEDIA IN DIGITAL DESIGN PROCESS: Towards a standardize procedure of CAD/CAM fabrication
doi	https://doi.org/10.52842/conf.caadria.2006.x.r4i
source	CAADRIA 2006 [Proceedings of the 11th International Conference on Computer Aided Architectural Design Research in Asia] Kumamoto (Japan) March 30th - April 2nd 2006, 597-599
summary	In 1990, due to the traditional architecture design and construction method difficult to build the complicated and non-geometry free-form Fish Structure in Barcelona, architect Frank Gehry started learn from the field of aerospace to utilize CAD/CAM technology in design and manufacture process. He created the free-form fish model in CAD system and exported the digital CAD model data to CAM machine (RP and CNC) to fabricate the design components, and finally assembled on the site. Gehry pioneered in the new digital design process in using CAD/CAM technology or so-called digital fabrication. It becomes an important issue recently as the CAD/CAM technology progressively act as the new digital design media in architectural design and construction process (Ryder et al., 2002; Kolarevic, 2003). Furthermore, in the field of architecture professional, some commercial computer systems had been developed on purpose of standardizes the digital design process in using CAD/CAM fabrication such as Gehry Technologies formed by Gehry Partners; SmartGeometry Group in Europe and Objectile proposed by Bernard Cache. Researchers in the research field like Mark Burry, Larry Sass, Branko Kolarevic, Schodek and others are enthusiastic about the exploration of the role of CAD/CAM fabrication as new design media in design process (Burry, 2002; Schodek et al., 2005; Lee, 2005).
series	CAADRIA
email
last changed	2022/06/07 07:50

_id	caadria2005_b_3c_a
id	caadria2005_b_3c_a
authors	Christopher Lowry
year	2005
title	Making Understanding: Research in the application of virtual environments in the teaching of architectural design and technology
doi	https://doi.org/10.52842/conf.caadria.2005.093
source	CAADRIA 2005 [Proceedings of the 10th International Conference on Computer Aided Architectural Design Research in Asia / ISBN 89-7141-648-3] New Delhi (India) 28-30 April 2005, vol. 2, pp. 93-101
summary	This paper describes how the application of interactive three dimensional computer modelling enables students of architecture to gain a comprehensive insight into how buildings are made. An intimate exploration of what can be, in the student’s perception, a lacklustre subject area is revitalized through the use of virtual building models and introduces the student to the potentials of this medium in communicating their own design work. In addition the published case studies are navigated as one would a web site which is a familiar and comfortable format for the student. Original working drawings and specification provided by architects are utilised in generating detailed three dimensional virtual models of the complete building along with larger scale detail studies of particular building components. The models are then animated or transferred to VRML format for publication within interactive case studies. The case studies may be accessed via the department server for use by staff during lectures and seminars or informally by the individual student.
series	CAADRIA
email
last changed	2022/06/07 07:56

_id	acadia18_404
id	acadia18_404
authors	Clifford, Brandon; McGee, Wes
year	2018
title	Cyclopean Cannibalism. A method for recycling rubble
doi	https://doi.org/10.52842/conf.acadia.2018.404
source	ACADIA // 2018: Recalibration. On imprecisionand infidelity. [Proceedings of the 38th Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) ISBN 978-0-692-17729-7] Mexico City, Mexico 18-20 October, 2018, pp. 404-413
summary	Each year, the United States discards 375 million tons of concrete construction debris to landfills (U.S. EPA 2016), but this is a new paradigm. Past civilizations cannibalized their constructions to produce new architectures (Hopkins 2005). This paper interrogates one cannibalistic methodology from the past known as cyclopean masonry in order to translate this valuable method into a contemporary digital procedure. The work contextualizes the techniques of this method and situates them into procedural recipes which can be applied in contemporary construction. A full-scale prototype is produced utilizing the described method; demolition debris is gathered, scanned, and processed through an algorithmic workflow. Each rubble unit is then minimally carved by a robotic arm and set to compose a new architecture from discarded rubble debris. The prototype merges ancient construction thinking with digital design and fabrication methodologies. It poses material cannibalism as a means of combating excessive construction waste generation.
keywords	full paper, cyclopean, algorithmic, robotic fabrication, stone, shape grammars, computation
series	ACADIA
type	paper
email
last changed	2022/06/07 07:56

_id	bc88
id	bc88
authors	Coates P, Derix C, Lau T, Parvin T and Puusepp R
year	2005
title	Topological Approximations for Spatial Representations
source	Proceedings of the Generative Arts conference, Milan, 2005
summary	Marshall McLuhan once said in his book Understanding Media that ‘Environments are invisible. Their ground rules evade easy perception.’ Evasive perception leads to fuzzy representations as shown through Kevin Lynch’s mental maps and the Situationists’ psycho-geographies. Eventually, spatial representations have to be described through abstractions based on some embedded rules of environmental interaction. These rules and methods of abstraction serve to understand cognition of space. The Centre for Evolutionary Computing in Architecture (CECA) at the University of East London has focused for the last 5 years on methods of cognitive spatial descriptions, based largely on either behavioural patterns or topological machines. The former being agent based, the latter neural network based. This year’s selection of student work constitutes a combination of cognitive agents + perceptive networks, and comprises three theses.
keywords	spatial cognition, neural networks, spatial perception, agent modelling
series	other
type	normal paper
email
more	http://www.generativeart.com/
last changed	2012/09/20 18:46

_id	6547
id	6547
authors	Coates P, Derix C, Lau T, Parvin T and Puusepp R
year	2005
title	Topological Approximations for Spatial Representations
source	Proceedings of the Generative Arts conference, Milan, 2005
summary	Marshall McLuhan once said in his book Understanding Media that ‘Environments are invisible. Their ground rules evade easy perception.’ Evasive perception leads to fuzzy representations as shown through Kevin Lynch’s mental maps and the Situationists’ psycho-geographies. Eventually, spatial representations have to be described through abstractions based on some embedded rules of environmental interaction. These rules and methods of abstraction serve to understand cognition of space. The Centre for Evolutionary Computing in Architecture (CECA) at the University of East London has focused for the last 5 years on methods of cognitive spatial descriptions, based largely on either behavioural patterns or topological machines. The former being agent based, the latter neural network based. This year’s selection of student work constitutes a combination of cognitive agents + perceptive networks, and comprises three theses.
keywords	spatial cognition, neural networks, spatial perception, agent modelling
series	other
type	normal paper
email
more	http://www.generativeart.com/
last changed	2012/09/20 21:09

_id	2005_607
id	2005_607
authors	Coppola, C., Calabrese, A., Iazzetta, A., Mele, F. and Talamo, O.
year	2005
title	The Transformation’s Control and Development
doi	https://doi.org/10.52842/conf.ecaade.2005.607
source	Digital Design: The Quest for New Paradigms [23nd eCAADe Conference Proceedings / ISBN 0-9541183-3-2] Lisbon (Portugal) 21-24 September 2005, pp. 607-614
summary	The study of DNA of artifact and the development leading to its use in the field of industrial production of a single piece is now a common feature in the syllabus of the degree in Industrial Design at Faculty of Architecture “Luigi Vanvitelli” of SUN. The Generative Design Laboratory is where this process is carried out and includes the PROGEOR project for Generative Jewels Design. The experience acquired in the Generative Design Laboratory has developed along the lines of THE SINGLE PIECE, a product which combines the uniqueness of a handcrafted artefact with mass production methods. The development of project control technologies and also production technologies enables real-life experimentation of these hypotheses to be conducted.
keywords	Generative Model Design, Ontology, Agents
series	eCAADe
email
last changed	2022/06/07 07:56

For more results click below: