Cumincad : CUMINCAD Papers : Search Results

CumInCAD is a Cumulative Index about publications in Computer Aided Architectural Design
supported by the sibling associations ACADIA, CAADRIA, eCAADe, SIGraDi, ASCAAD and CAAD futures

PDF papers
References

Hits 1 to 20 of 555

Reformat results as: short short into frame detailed detailed into frame

_id	caadria2005_a_2b_a
id	caadria2005_a_2b_a
authors	Affleck, Janice; Kvan Thomas
year	2005
title	REINTERPRETING VIRTUAL HERITAGE
doi	https://doi.org/10.52842/conf.caadria.2005.169
source	CAADRIA 2005 [Proceedings of the 10th International Conference on Computer Aided Architectural Design Research in Asia / ISBN 89-7141-648-3] New Delhi (India) 28-30 April 2005, vol. 1, pp. 169-178
summary	This paper describes the context and proposal for an alternative approach to the common pattern of application of digital tools in the area of cultural heritage, also know as Virtual Heritage (VH). It investigates and addresses arising issues in a digital case study developed to implement a theoretical framework and investigate how and if existing technology can support it.
series	CAADRIA
type	normal paper
email
last changed	2022/06/07 07:54

_id	ascaad2014_023
id	ascaad2014_023
authors	Al-Maiyah, Sura and Hisham Elkadi
year	2014
title	Assessing the Use of Advanced Daylight Simulation Modelling Tools in Enhancing the Student Learning Experience
source	Digital Crafting [7th International Conference Proceedings of the Arab Society for Computer Aided Architectural Design (ASCAAD 2014 / ISBN 978-603-90142-5-6], Jeddah (Kingdom of Saudi Arabia), 31 March - 3 April 2014, pp. 303-313
summary	In architecture schools, where the ‘studio culture’ lies at the heart of students’ learning, taught courses, particularly technology ones, are often seen as secondary or supplementary units. Successful delivery of such courses, where students can act effectively, be motivated and engaged, is a rather demanding task requiring careful planning and the use of various teaching styles. A recent challenge that faces architecture education today, and subsequently influences the way technology courses are being designed, is the growing trend in practice towards environmentally responsive design and the need for graduates with new skills in sustainable construction and urban ecology (HEFCE’s consultation document, 2005). This article presents the role of innovative simulation modelling tools in the enhancement of the student learning experience and professional development. Reference is made to a teaching practice that has recently been applied at Portsmouth School of Architecture in the United Kingdom and piloted at Deakin University in Australia. The work focuses on the structure and delivery of one of the two main technology units in the second year architecture programme that underwent two main phases of revision during the academic years 2009/10 and 2010/11. The article examines the inclusion of advanced daylight simulation modelling tools in the unit programme, and measures the effectiveness of enhancing its delivery as a key component of the curriculum on the student learning experience. A main objective of the work was to explain whether or not the introduction of a simulation modelling component, and the later improvement of its integration with the course programme and assessment, has contributed to a better learning experience and level of engagement. Student feedback and the grade distribution pattern over the last three academic years were collected and analyzed. The analysis of student feedback on the revised modelling component showed a positive influence on the learning experience and level of satisfaction and engagement. An improvement in student performance was also recorded over the last two academic years and following the implementation of new assessment design.
series	ASCAAD
email
last changed	2016/02/15 13:09

_id	sigradi2005_743
id	sigradi2005_743
authors	Albornoz Delgado, Humberto Ángel; Leticia Gallegos Cazares
year	2005
title	Science teaching with technology (ECIT)
source	SIGraDi 2005 - [Proceedings of the 9th Iberoamerican Congress of Digital Graphics] Lima - Peru 21-24 november 2005, vol. 2, pp. 743-748
summary	There is an evident need to improve the teaching of sciences. Therefore the ECIT Web page has been designed to assist the teaching of physics, chemistry and biology to secondary students. Considering technology as a mean and not as an end for teaching, the “ECIT Model” was developed following pedagogic as well as design criteria. Its’ implementation requires a specific classroom outline, the use of certain technological tools and an efficient interface, to achieve a working environment (not only digital) of action and learning. The application has been successful and progress has been remarkable in students´ conceptual development in all the subjects. [Full paper in Spanish]
series	SIGRADI
email
last changed	2016/03/10 09:47

_id	sigradi2005_673
id	sigradi2005_673
authors	Amorim, Arivaldo Leão de; Daniel Chudak
year	2005
title	Digital Historic Heritage: documenting of Pelourinho, Salvador - Bahia, Brazil, with 3D laser scanning technology
source	SIGraDi 2005 - [Proceedings of the 9th Iberoamerican Congress of Digital Graphics] Lima - Peru 21-24 november 2005, vol. 2, pp. 673-678
summary	This paper describes the Pelourinho Project realized past July in Salvador, during the 1st International Conference on 3D Laser Scanning for Heritage Documentation. The Pelourinho located at the historic center of Salvador, is an impressive wide set of buildings listed by UNESCO as World Heritage. The text contains a quickly overview about the 3D laser scanning technology, shows how data are captured and what they stored and what they means. The 3D laser scanning model, another kind of 3D geometric model is called point cloud and represents an excellent way to store data of some particular constructions. Because its irregular shapes it is very arduous to survey and represent these constructions by any other method. The point cloud model is an excellent way to represent with integrity and accuracy these particular complex shapes like the colonial baroque churches in Brazil. [Full paper in Portuguese]
series	SIGRADI
email
last changed	2016/03/10 09:47

_id	acadia05_012
id	acadia05_012
authors	Anshuman, Sachin
year	2005
title	Responsiveness and Social Expression; Seeking Human Embodiment in Intelligent Façades
doi	https://doi.org/10.52842/conf.acadia.2005.012
source	Smart Architecture: Integration of Digital and Building Technologies [Proceedings of the 2005 Annual Conference of the Association for Computer Aided Design In Architecture / ISBN 0-9772832-0-8] Savannah (Georgia) 13-16 October 2005, pp. 12-23
summary	This paper is based on a comparative analysis of some twenty-six intelligent building facades and sixteen large media-facades from a socio-psychological perspective. It is not difficult to observe how deployment of computational technologies have engendered new possibilities for architectural production to which surface-centeredness lies at that heart of spatial production during design, fabrication and envelope automation processes. While surfaces play a critical role in contemporary social production (information display, communication and interaction), it is important to understand how the relationships between augmented building surfaces and its subjects unfold. We target double-skin automated facades as a distinct field within building-services and automation industry, and discuss how the developments within this area are over-occupied with seamless climate control and energy efficiency themes, resulting into socially inert mechanical membranes. Our thesis is that at the core of the development of automated façade lies the industrial automation attitude that renders the eventual product socially less engaging and machinic. We illustrate examples of interactive media-façades to demonstrate how architects and interaction designers have used similar technology to turn building surfaces into socially engaging architectural elements. We seek opportunities to extend performative aspects of otherwise function driven double-skin façades for public expression, informal social engagement and context embodiment. Towards the end of the paper, we propose a conceptual model as a possible method to address the emergent issues. Through this paper we intend to bring forth emergent concerns to designing building membrane where technology and performance are addressed through a broader cultural position, establishing a continual dialogue between the surface, function and its larger human context.
series	ACADIA
email
last changed	2022/06/07 07:54

_id	sigradi2005_190
id	sigradi2005_190
authors	Ataman, Osman
year	2005
title	The digital architecture of tomorrow
source	SIGraDi 2005 - [Proceedings of the 9th Iberoamerican Congress of Digital Graphics] Lima - Peru 21-24 november 2005, vol. 1, pp. 190-193
summary	This paper presents an ongoing research project about the development of the materials and fabrication techniques for a fundamentally new class of architectural composite. This type of composite, which is a representative example of an even broader class of smart architectural material, has the potential to change the design and function of an architectural structure or living environment. As of today, this kind of composite does not exist. Once completed, this will be the first technology on its own. We believe this study will lay the fundamental groundwork for a new paradigm in surface engineering that may be of considerable significance in architecture, building and construction industry, and materials science.
series	SIGRADI
last changed	2016/03/10 09:47

_id	ijac20053202
id	ijac20053202
authors	Ataman, Osman
year	2005
title	Integrating Digital and Building Technologies: Towards a New Architectural Composite
source	International Journal of Architectural Computing vol. 3 - no. 2, 181-190
summary	This paper presents an ongoing research project about the development of the materials and fabrication techniques for a fundamentally new class of architectural composite. This type of composite, which is a representative example of an even broader class of smart architectural material, has the potential to change the design and function of an architectural structure or living environment. As of today, this kind of composite does not exist. Once completed, this will be the first technology on its own. We believe this study will lay the fundamental groundwork for a new paradigm in surface engineering that may be of considerable significance in architecture, building and construction industry, and materials science.
series	journal
more	http://www.multi-science.co.uk/ijac.htm
last changed	2007/03/04 07:08

_id	2005_131
id	2005_131
authors	Bailey, Rohan
year	2005
title	Digital Tools for Design Learning
doi	https://doi.org/10.52842/conf.ecaade.2005.131
source	Digital Design: The Quest for New Paradigms [23nd eCAADe Conference Proceedings / ISBN 0-9541183-3-2] Lisbon (Portugal) 21-24 September 2005, pp. 131-138
summary	There is growing consensus among architectural critics and educators that there exists an increasing divide between the worlds of architectural education and practice. New social and cultural norms, new materials, and current global concerns, like sustainability, have largely influenced the need for an improved balance/integration between design theory and practice. This places schools of architecture around the world under pressure to provide their graduates with the requisite skills that support responsible design characterized by good design thinking strategies. The Caribbean School of Architecture, in addition to being affected by this predicament, has other pressures on its educational offerings. The region’s lack of resources and particular social issues mandates that graduates of the school adopt a responsible attitude towards design in the region. A positive attitude to such issues as sustainability, energy conservation and community will only come about through an effective transmission of particular architectural knowledge that is relevant to the region. The challenge (globally and in the Caribbean), therefore, is the provision of an innovative and effective way of supporting the student master dialogue in studio, facilitating the transfer of “practical, appropriate knowledge” needed by students to create safe, purposeful and responsible architecture. This paper exists within the research paradigm of providing digital teaching tools to beginning students of architecture. This digital research paradigm seeks to move digital technology (the computer) beyond functioning as an instrumental tool (in visualization, representation and fabrication) to becoming a “Socratic machine” that provides an appropriate environment for design learning. Research funds have been allocated to the author to research and develop the information component of the tool with special reference to the Caribbean. The paper will report on the results of prior investigations, describe the reaction and appreciation of the students and conclude with lessons learnt for the further development of the teaching tool.
keywords	Design Education, Digital Design, Teaching Tools
series	eCAADe
email
last changed	2022/06/07 07:54

_id	acadia05_170
id	acadia05_170
authors	Barker, Daniel and Dong, Andy
year	2005
title	A Representation Language for a Prototype CAD Tool for Intelligent Rooms
doi	https://doi.org/10.52842/conf.acadia.2005.170
source	Smart Architecture: Integration of Digital and Building Technologies [Proceedings of the 2005 Annual Conference of the Association for Computer Aided Design In Architecture / ISBN 0-9772832-0-8] Savannah (Georgia) 13-16 October 2005, pp. 170-183
summary	Intelligent rooms are a type of intelligent environment which enhance ordinary activities within the confines of a room by responding to human interaction using pervasive and ubiquitous computing. In the design of intelligent rooms, the specification of how the intelligent room enacts intelligent behavior through computational means is as integral as the geometric description. The self-aware and context-aware capabilities of intelligent rooms extend the requirements for computer-aided design tools beyond 3D modeling of objects. This article presents a Hardware as Agents Description Language for Intelligent Rooms (HADLIR) to model hardware in an intelligent room as “hardware agents” having sensor and/or effector modalities with rules and goals. End-users describe intelligent room hardware as agents based on the HADLIR representation and write agent rules and goals in Jess for each hardware component. This HADLIR agent description and the requisite software sensors/effectors constitute “hardware agents” which are instantiated into a multi-agent society software environment. The society is then bridged to either a virtual environment to prototype the intelligent room or to microelectronic controllers to implement a physical intelligent room. The integration illustrates how the HADLIR representation assists in the design, simulation and implementation of an intelligent room and provides a foundation technology for CAD tools for the creation of intelligent rooms.
series	ACADIA
email
last changed	2022/06/07 07:54

_id	sigradi2005_511
id	sigradi2005_511
authors	Barrow, Larry R.
year	2005
title	Man and machine: ideation and Making
source	SIGraDi 2005 - [Proceedings of the 9th Iberoamerican Congress of Digital Graphics] Lima - Peru 21-24 november 2005, vol. 1, pp. 511-516
summary	The realization of architecture, that is the building of the physical artifact, requires numerous collaborative participates that requires a communication network in order to realize the vision. All efforts to communicate a design idea prior to physical realization, that is manufacturing or construction, are forms of visualization (i.e. representation). Herein lies the fundamental problem, the designer(s) must en-vision, and communicate that which is to BE ... physical, yet is NOT... physical. In this paper, we will review the emerging Human-Computer-Interface and technology influences on process and product; here we find the “humanistic” component is a critical factor in the success of “digital” strategies.
series	SIGRADI
email
last changed	2016/03/10 09:47

_id	sigradi2005_749
id	sigradi2005_749
authors	Bessone, Miriam; Susana Garramuño de Galuzzi
year	2005
title	Design education, technology and visualization
source	SIGraDi 2005 - [Proceedings of the 9th Iberoamerican Congress of Digital Graphics] Lima - Peru 21-24 november 2005, vol. 2, pp. 749-754
summary	University faculty -adult culture- work from the logic that goes through their speech, didactic model and strategies, providing special links with: the aim of knowledge, transmission mechanisms and technological medium. Students -young culture- receive and deal with knowledge mechanisms from a new logic. In a multimedia framework they establish interpretations using technological medium from semantic decodification. Young graduates, assistants, studio leaders -intermediate culture- coming from traditional learning models with acquired abilities in digital media, are a “potential interface” between both cultures. The impact between fields and cultures implies limitations and risks that may encourage change. A discourse about “new didactic configurations” from the point of view of these three cultures makes possible the exploration of other ways of teaching. Therefore the articulation of teacher-student interrelations and media promotes the development of teaching-learning techniques. [Full paper in Spanish]
series	SIGRADI
email
last changed	2016/03/10 09:47

_id	2005_441
id	2005_441
authors	Biloria, Nimish
year	2005
title	Emergent Technologies and Design
doi	https://doi.org/10.52842/conf.ecaade.2005.441
source	Digital Design: The Quest for New Paradigms [23nd eCAADe Conference Proceedings / ISBN 0-9541183-3-2] Lisbon (Portugal) 21-24 September 2005, pp. 441-447
summary	The recurrent issue of materializing a responsive architectural spatiality, emergent, in its conception and the need for collaborative substantiation of the design process, utilizing a multidisciplinary approach towards developing intelligent architectonics are exemplified upon in this research paper through a design research experiments conducted by the author: Developing concept prototypes for electronic media augmented spatial skins. The augmented skin project exemplifies a synergetic merger of scientific investigations into the fields of bio-mimetics, control system, material technology and embedded computation techniques.
keywords	Control Systems; Real-Time Interactivity; Bio-Mimetics; Embedded Computation
series	eCAADe
email
last changed	2022/06/07 07:54

_id	acadia05_236
id	acadia05_236
authors	Brandt, Jordan
year	2005
title	Skin That Fits: Designing and constructing cladding systems with as-built structural data
doi	https://doi.org/10.52842/conf.acadia.2005.236
source	Smart Architecture: Integration of Digital and Building Technologies [Proceedings of the 2005 Annual Conference of the Association for Computer Aided Design In Architecture / ISBN 0-9772832-0-8] Savannah (Georgia) 13-16 October 2005, pp. 236-245
summary	An awkward interface exists between the structure and skin of complex architecture. The primary structure is typically allowed much higher tolerance ranges than that of the cladding industry, due primarily to the delicate nature of the building envelope which, above all, must prevent water penetration and meet the aesthetic requirements of the architect and client. As architecture has integrated advanced design and fabrication techniques to realize increasingly complex shapes, this problem has been aggravated because of the tangency requirements for high gloss curved finish surfaces and the larger variations found with rolled steel columns and undulating concrete forms. To date, most innovations in this area have been focused upon mechanical connections that can be adjusted and shimmed, thus requiring increased design engineering and on-site labor costs for effective implementation. It would be preferable to manufacture cladding components that are properly adjusted to the actual site conditions, negating the need to predict and accommodate potential dimensional variation with complex connections. The research provides a model for implementing long distance laser scanning technology to facilitate a real-time parametric BIM, herein called an Isomodel.
series	ACADIA
email
last changed	2022/06/07 07:54

_id	sigradi2005_344
id	sigradi2005_344
authors	Bustos, Gabriela I. L.; Iván V. Burgos P., Javier Oliva
year	2005
title	Multi-user virtual worlds: 3D interactive visualization in synthetic environments for design workshops
source	SIGraDi 2005 - [Proceedings of the 9th Iberoamerican Congress of Digital Graphics] Lima - Peru 21-24 november 2005, vol. 1, pp. 344-349
summary	The goal of this research is to describe a methodology of architectural design by using digital technology with three-dimensional interactive simulation in multi-user virtual worlds. In addition, this study will focus on the application of this method in the workshops at the School of Architecture in the University of Zulia. With this proposal, it is possible to integrate many users, in real time, from different locations on the same virtual world in Internet. In the same way, each visitor is able to interact and modify the virtual world using virtual menus while sharing ideas or modifications regarding the design of the project. This strategy allows modeling, visualizing, developing and evaluating the designed projects during the conceptual and parametric phase in the process of design. This application is a powerful tool to develop creativity and skills of spatial perception among the students. [Full paper in Spanish]
series	SIGRADI
email
last changed	2016/03/10 09:47

_id	ijac20053306
id	ijac20053306
authors	Cabral Filho, Jose dos Santos
year	2005
title	Digital Art A Field of Inquiry for Contemporary Architecture
source	International Journal of Architectural Computing vol. 3 - no. 3, 355-372
summary	This article investigates the interplay of digital technology, art and architecture and it presents a series of experimental workshops developed at LAGEAR (Graphic Laboratory for the Experience of Architecture, School of Architecture at UFMG, Brazil). The intention of these workshops is to include an artistic approach to the work in a computer lab dedicated to teaching and researching architecture. At first, a discussion on the relationship between art and architecture is presented, followed by an analysis of the enhancement of such relationship with the advent of digital technology. Then a series of works developed by artists and students in collaboration is described. The article concludes with a discussion on the role of digital art for architectural education. It is proposed that it may be one of the most adequate fields for students to freely investigate contemporary issues, such as interactivity and automation, which are now shaping our built environment.
series	journal
more	http://www.ingentaconnect.com/search/expand?pub=infobike://mscp/ijac/2005/00000003/00000003/art00007
last changed	2007/03/04 07:08

_id	2005_269
id	2005_269
authors	Caldas, Luisa and Duarte, José
year	2005
title	Fabricating Ceramic Covers
doi	https://doi.org/10.52842/conf.ecaade.2005.269
source	Digital Design: The Quest for New Paradigms [23nd eCAADe Conference Proceedings / ISBN 0-9541183-3-2] Lisbon (Portugal) 21-24 September 2005, pp. 269-276
summary	This paper describes a studio experiment developed with the aim of exploring the design and fabrication of innovative roof systems based on ceramic tiles using digital technologies. History is rich in examples of the use of ceramic roof tiles since the ancient world. Today’s systems derive from such ancient systems and fall into several basic categories depending on the form of the tiles and how they interlock. These systems present acceptable functional performances due to centuries of refinement, but as they have suffered little formal evolution in recent centuries, to respond to modern needs they require complex layering and assemblies. Recent technological evolution has emphasized the optimization of the tile production process in terms of time saving and cost reduction, and the improvement of product quality in terms of material homogeneity and durability. Little attention has been paid to the tile form and the roof system as a whole, including the assembly process. As a result, despite the variety and performance of existing designs, they are often perceived as outdated by architects who refuse to use them following a stylistic trend in architectural design towards primary forms and flat roofs. The challenge of the experiment was to take advantage of digital design and fabrication technology to conceive systems with improved performance and contemporary designs. The hope was that this could lead architects to consider integrating roof tiles systems in their architectural proposals. Results yielded five different roof systems. These systems are innovative from a formal viewpoint both at the tile and roof level. In addition, they are easy to assemble and possess better thermal and water-proofing performance. Digital technologies were determinant to enable students to design the complex shape of the tiles, to manipulate them into assemblies, and to assess the shape of the roofs, as well as their thermal and structural performance in some cases.
keywords	Design Education; Rapid Prototyping; Collaboration; Ceramics; Innovation; Tiles
series	eCAADe
email
last changed	2022/06/07 07:54

_id	sigradi2005_603
id	sigradi2005_603
authors	Castañé, Dora; Claudio Deho, Adrián Barcesat, Carlos Tessier
year	2005
title	Urbamedia: the design of an integrated system of urban-building visualization and communication
source	SIGraDi 2005 - [Proceedings of the 9th Iberoamerican Congress of Digital Graphics] Lima - Peru 21-24 november 2005, vol. 2, pp. 603-608
summary	This paper presents the advancements of the Urbamedia project which was designed as part of a research program at the Center CAO (Creation computer assist), School of Architectural Design and Urbanism, University of Buenos Aires, which was led by the valued master and advisory professor Architect Arturo F. Montagu. This proposal of the city of Buenos Aires on the Mayo Avenue expands the original historical fragment presented between the following two referenced representative landmarks: The Two Congresses Square and the Mayo Square. It continues with the advancement of methodologies and techniques implemented in a system of “integrated visualization and communication” for the development of a VRML (Virtual Reality Modeling Language) 3D virtual non-immersive and interactive vision. It also incorporates the development of a “foundation of digitally integrated knowledge” with fragments of central areas from other surrounding cities as well as interfaced phenomenological situations. The application of digital VRML technology has allowed for thoroughly researching the processes through dynamic simulation of specific urban fragments (Mayo Avenue within Buenos Aires) and the cities that are also participating in the project. [Full paper in Spanish]
series	SIGRADI
email
last changed	2016/03/10 09:48

_id	cf2005_1_62_226
id	cf2005_1_62_226
authors	CHENG, Nancy Yen-wen and MCKELVEY Andrew
year	2005
title	LEARNING DESIGN PROCESS WITH DIGITAL SKETCHING: COPYING GRAPHIC PROCESSES FROM ANIMATIONS AND STORYBOARDS
source	Computer Aided Architectural Design Futures 2005 [Proceedings of the 11th International Conference on Computer Aided Architectural Design Futures / ISBN 1-4020-3460-1] Vienna (Austria) 20–22 June 2005, pp. 291-300
summary	This paper examines the effectiveness of animated versus non-animated drawings as teaching tools. Data was collected by comparing how architectural design students given an animation versus those given a static, six-panel storyboard are able to learn processes in a space-planning design problem. All subjects were given an example of an expert design drawing, asked to put the design steps in order, and then to follow those steps in performing a similar design problem. Their responses were recorded with a digital pen-on-paper system that automatically generates vector animations. The animations can then be immediately viewed on a computer for stroke-by-stroke review. Finally, each student’s animation was analysed in terms of design process steps and compared with the expert example. While those given animations performed only marginally better on the survey of steps, they were better able to imitate the order of expert steps. Furthermore, reviewing the examples by computer revealed common errors that students could modify for more successful design strategies. The following discussion examines methods for researching design process with the digital pen, along with shortcomings, advantages and directions for further study.
keywords	teaching, with technology, sketching, design teaching, digital pPen-based computing
series	CAAD Futures
type	normal paper
email
last changed	2007/10/22 06:58

_id	caadria2006_597
id	caadria2006_597
authors	CHOR-KHENG LIM, CHING-SHUN TANG, WEI-YEN HSAO, JUNE-HAO HOU, YU-TUNG LIU
year	2006
title	NEW MEDIA IN DIGITAL DESIGN PROCESS: Towards a standardize procedure of CAD/CAM fabrication
doi	https://doi.org/10.52842/conf.caadria.2006.x.r4i
source	CAADRIA 2006 [Proceedings of the 11th International Conference on Computer Aided Architectural Design Research in Asia] Kumamoto (Japan) March 30th - April 2nd 2006, 597-599
summary	In 1990, due to the traditional architecture design and construction method difficult to build the complicated and non-geometry free-form Fish Structure in Barcelona, architect Frank Gehry started learn from the field of aerospace to utilize CAD/CAM technology in design and manufacture process. He created the free-form fish model in CAD system and exported the digital CAD model data to CAM machine (RP and CNC) to fabricate the design components, and finally assembled on the site. Gehry pioneered in the new digital design process in using CAD/CAM technology or so-called digital fabrication. It becomes an important issue recently as the CAD/CAM technology progressively act as the new digital design media in architectural design and construction process (Ryder et al., 2002; Kolarevic, 2003). Furthermore, in the field of architecture professional, some commercial computer systems had been developed on purpose of standardizes the digital design process in using CAD/CAM fabrication such as Gehry Technologies formed by Gehry Partners; SmartGeometry Group in Europe and Objectile proposed by Bernard Cache. Researchers in the research field like Mark Burry, Larry Sass, Branko Kolarevic, Schodek and others are enthusiastic about the exploration of the role of CAD/CAM fabrication as new design media in design process (Burry, 2002; Schodek et al., 2005; Lee, 2005).
series	CAADRIA
email
last changed	2022/06/07 07:50

_id	sigradi2005_463
id	sigradi2005_463
authors	Costa Cabral, Cláudia Piantá
year	2005
title	Computer City, 1994
source	SIGraDi 2005 - [Proceedings of the 9th Iberoamerican Congress of Digital Graphics] Lima - Peru 21-24 november 2005, vol. 1, pp. 463-467
summary	This paper is about an emblematic design of the sixties, Dennis Crompton’s Computer City, published in 1964 by Archigram Magazine. Besides other enterprises of its time, Archigram promoted a critical view over institutionalised post-war modernism for not being able to recognize the emergence of new social realities, identified with the new technologies of automation and information, the restructuring of capitalist fordism and the shift from a predominantly industrial culture to an electronic culture. This paper sustains that more than a direct translation of unquestionable technical necessities; it was a conscious attempt of producing a sort of representation of technology. Crompton’s design clearly demonstrates the actual change in the character of technology, when it is no longer primarily identified with artefacts and objects, as the machine, and seems to be progressively identified with abstract and ubiquitous systems and processes of control, as automation and information systems. [Full paper in Portuguese]
series	SIGRADI
email
last changed	2016/03/10 09:49

For more results click below: