CumInCAD is a Cumulative Index about publications in Computer Aided Architectural Design
supported by the sibling associations ACADIA, CAADRIA, eCAADe, SIGraDi, ASCAAD and CAAD futures

PDF papers
References

Hits 1 to 20 of 547

_id 2005_077
id 2005_077
authors Chen, Hong-Sheng, Tseng, Lan-Ting and Li, Chi-Hua
year 2005
title CaseBox: a Tool for Case-based Learning
source Digital Design: The Quest for New Paradigms [23nd eCAADe Conference Proceedings / ISBN 0-9541183-3-2] Lisbon (Portugal) 21-24 September 2005, pp. 77-82
doi https://doi.org/10.52842/conf.ecaade.2005.077
summary This study reports on the development and experiment of CaseBox for case-based learning. Due to many advantages of the case-based reasoning, the authors create a learning environment for both teachers and students. In the digital era, multimedia and web-based education methodologies emerge auspiciously in schools. Teachers and students no longer satisfy paper-based documents, they research with case-based reasoning on the internet. CaseBox is proposed as a learning environment, which supports: 1) Teachers introduce cases. 2) Students study and reuse cases. 3) Members discuss design on the web. CaseBox is still under development and this study reports on the efforts and discoveries at the recent stage, and shares the debates of ideas and problems of case-based e-Learning.
keywords Case-based Learning, Design Studio, Education
series eCAADe
email
last changed 2022/06/07 07:55

_id cf2005_2_61_192
id cf2005_2_61_192
authors HOLZER Dominik, TANG Jiwu, XIE Mik2 and BURRY Mark
year 2005
title Design Using Evolutionary Optimisation and Associative Geometry
source Learning from the Past a Foundation for the Future [Special publication of papers presented at the CAAD futures 2005 conference held at the Vienna University of Technology / ISBN 3-85437-276-0], Vienna (Austria) 20-22 June 2005, pp. 243-254
summary This paper describes the usage of parametric design and evolutionary optimisation techniques in architect-engineer collaborations. It discusses the apparent challenges in setting up a trans-disciplinary working-platform that cuts across profession-specific boundaries and negotiates between the otherwise distinct work-methodologies through the use of intelligent CAAD applications. Two approaches to architectural form finding have been combined in this research. The first, parametric design, uses a proprietary package as a key element to the organisation and reorganisation of architectural design. By doing so, it is providing it with intrinsic flexibility allowing designers to go beyond form and accommodate performance data for versioning. The second, ESO (Evolutionary Structural Optimisation), is an engineering tool based on the use of finite element analysis (FEA) capable of optimising the formal geometry of an object to obtain minimum volume under even stress-distribution through an iterative design process. In undertaking this research it became apparent that different levels of resolution need to be addressed in the form-finding process in order to investigate the full potential of the interactive use of parametric design and evolutionary optimisation. The case studies reflect this diversity and demonstrate more successes, limitations and future challenges within the transdisciplinary, collaborative effort.
keywords associative geometry, evolutionary structural optimisation, architect engineer collaboration, finite element analysis
series CAAD Futures
email
last changed 2005/05/05 07:06

_id cf2005_2_35_224
id cf2005_2_35_224
authors KOBAYASHI Yoshihiro and BATTINA Subhadha
year 2005
title Housing Layout Design Using Fractals
source Learning from the Past a Foundation for the Future [Special publication of papers presented at the CAAD futures 2005 conference held at the Vienna University of Technology / ISBN 3-85437-276-0], Vienna (Austria) 20-22 June 2005, pp. 119-128
summary This paper introduces a computer-based tool for three dimensional (3D) landscape simulations of housing-layout-design using the concepts of fractals with Iterative Function System (IFS). Housing layout design is defined as a design to allocate many house-units in the undeveloped site. The tool generates a variety of layout designs consisting of multiple dwelling house-units from manual inputs or a template pattern defined as an XML file. Each unit can contain any detailed 3D components found in the residential development such as a house, roads, walls, trees etc. The template defines the transformation rules for IFS including the information of geometrical relationships between the stages in the iteration and of the components used in stop-conditions. The application tool is formulated, implemented and tested. The results in the case studies using several practical sites are demonstrated and evaluated based on the experiments in the design studio.
keywords fractal, housing layout, virtual reality, generative system, Java3D
series CAAD Futures
email
last changed 2005/05/05 07:06

_id sigradi2005_300
id sigradi2005_300
authors Cavieres, Andrés P.; Marcelo Quezada G.
year 2005
title Analysis of the possibilities offered by the application of parametric modeling technologies in the design processes shared between architects and industrial designers: The prefabricated house case.
source SIGraDi 2005 - [Proceedings of the 9th Iberoamerican Congress of Digital Graphics] Lima - Peru 21-24 november 2005, vol. 1, pp. 300-303
summary Traditionally, the teaching of digital design systems has been focused on the operative learning of software. However, this almost exclusively technical approach has leaded to a partial view of these systems, as well suited platforms to exploration of project’s possibilities. Consequently their relevance as a base for project representation and therefore as a useful instrument for conceptual exploration for design and experimental research of their processes have been undervalued. On the other hand, this restrictive perspective results in an important waste of the teaching possibilities lying in CAD software related with interdisciplinary teamwork. The following academic experience obeys to a new insight of how to teach these tools, based upon problem solving in Design by interdisciplinary students work teams from Architecture and Industrial Design. In this bet, the learning process is flexible, shared and collaborative, according to the requirements of each project, powered by the commitment of facing common goals. [Full paper in Spanish]
series SIGRADI
email
last changed 2016/03/10 09:48

_id caadria2005_b_4c_b
id caadria2005_b_4c_b
authors Chang, Ting-Yuan
year 2005
title Shift the Style: Supporting Product Design through Evolving Styles
source CAADRIA 2005 [Proceedings of the 10th International Conference on Computer Aided Architectural Design Research in Asia / ISBN 89-7141-648-3] New Delhi (India) 28-30 April 2005, vol. 2, pp. 240-245
doi https://doi.org/10.52842/conf.caadria.2005.240
summary How can we provide computational supports for product designers to actively utilize existing styles as driving force to achieve new designs? For a new style that can take the advantage from existing styles, we surveyed Case-Based Design and Case-Based Reasoning systems for product design and found discouraging results. We employ Learning Classifier Systems, a machine-learning paradigm, to perform automatic style classification. These classified styles are used to evolve new styles of designs.
series CAADRIA
email
last changed 2022/06/07 07:55

_id ascaad2012_003
id ascaad2012_003
authors Elseragy, Ahmed
year 2012
title Creative Design Between Representation and Simulation
source CAAD | INNOVATION | PRACTICE [6th International Conference Proceedings of the Arab Society for Computer Aided Architectural Design (ASCAAD 2012 / ISBN 978-99958-2-063-3], Manama (Kingdom of Bahrain), 21-23 February 2012, pp. 11-12
summary Milestone figures of architecture all have their different views on what comes first, form or function. They also vary in their definitions of creativity. Apparently, creativity is very strongly related to ideas and how they can be generated. It is also correlated with the process of thinking and developing. Creative products, whether architectural or otherwise, and whether tangible or intangible, are originated from ‘good ideas’ (Elnokaly, Elseragy and Alsaadani, 2008). On one hand, not any idea, or any good idea, can be considered creative but, on the other hand, any creative result can be traced back to a good idea that initiated it in the beginning (Goldschmit and Tatsa, 2005). Creativity in literature, music and other forms of art is immeasurable and unbounded by constraints of physical reality. Musicians, painters and sculptors do not create within tight restrictions. They create what becomes their own mind’s intellectual property, and viewers or listeners are free to interpret these creations from whichever angle they choose. However, this is not the case with architects, whose creations and creative products are always bound with different physical constraints that may be related to the building location, social and cultural values related to the context, environmental performance and energy efficiency, and many more (Elnokaly, Elseragy and Alsaadani, 2008). Remarkably, over the last three decades computers have dominated in almost all areas of design, taking over the burden of repetitive tasks so that the designers and students can focus on the act of creation. Computer aided design has been used for a long time as a tool of drafting, however in this last decade this tool of representation is being replaced by simulation in different areas such as simulation of form, function and environment. Thus, the crafting of objects is moving towards the generation of forms and integrated systems through designer-authored computational processes. The emergence and adoption of computational technologies has significantly changed design and design education beyond the replacement of drawing boards with computers or pens and paper with computer-aided design (CAD) computer-aided engineering (CAE) applications. This paper highlights the influence of the evolving transformation from Computer Aided Design (CAD) to Computational Design (CD) and how this presents a profound shift in creative design thinking and education. Computational-based design and simulation represent new tools that encourage designers and artists to continue progression of novel modes of design thinking and creativity for the 21st century designers. Today computational design calls for new ideas that will transcend conventional boundaries and support creative insights through design and into design. However, it is still believed that in architecture education one should not replace the design process and creative thinking at early stages by software tools that shape both process and final product which may become a limitation for creative designs to adapt to the decisions and metaphors chosen by the simulation tool. This paper explores the development of Computer Aided Design (CAD) to Computational Design (CD) Tools and their impact on contemporary design education and creative design.
series ASCAAD
email
more http://www.ascaad.org/conference/2012/papers/ascaad2012_003.pdf
last changed 2012/05/15 20:46

_id caadria2005_b_3b_c
id caadria2005_b_3b_c
authors Hong-Sheng Chen, Chi-Hua, Li
year 2005
title What Makes an Effective Case in Case-based Learning? : Our Debates at a Constructivist Teaching Studio
source CAADRIA 2005 [Proceedings of the 10th International Conference on Computer Aided Architectural Design Research in Asia / ISBN 89-7141-648-3] New Delhi (India) 28-30 April 2005, vol. 2, pp. 71-78
doi https://doi.org/10.52842/conf.caadria.2005.071
summary Case-based learning was adopted in a constructivist teaching studio. In this experimental class, teachers and students used cases for mutual learning in many ways. A significant question was debated in this class: “What makes an effective case in case-based learning?” This investigation studies students’ active construction of the meaning. The answer at the didactic teaching class will be quite different from ours. However, this investigation seeks to share our discussion and experience about this topic.
series CAADRIA
email
last changed 2022/06/07 07:50

_id cf2005_2_37_117
id cf2005_2_37_117
authors LIN Chieh-Yen and CHIU Mao-Lin
year 2005
title The Concept Space Explorer
source Learning from the Past a Foundation for the Future [Special publication of papers presented at the CAAD futures 2005 conference held at the Vienna University of Technology / ISBN 3-85437-276-0], Vienna (Austria) 20-22 June 2005, pp. 139-148
summary Design is often initiated by some ideas or concepts to form the design process, while design cases provide the impetus for design inspiration and conception. This paper is aimed at establishing a knowledge retrieval mechanism based on design concepts and their semantic relations. This research is based on a case library (CBA) implemented on the web as a repository of house cases and a learning environment for case-based design. The implementation and discussion is presented.
keywords design knowledge, semantic web, ontology, concept space, case library
series CAAD Futures
email
last changed 2005/05/05 07:06

_id cdc2008_243
id cdc2008_243
authors Loukissas, Yanni
year 2008
title Keepers of the Geometry: Architects in a Culture of Simulation
source First International Conference on Critical Digital: What Matters(s)? - 18-19 April 2008, Harvard University Graduate School of Design, Cambridge (USA), pp. 243-244
summary “Why do we have to change? We’ve been building buildings for years without CATIA?” Roger Norfleet, a practicing architect in his thirties poses this question to Tim Quix, a generation older and an expert in CATIA, a computer-aided design tool developed by Dassault Systemes in the early 1980’s for use by aerospace engineers. It is 2005 and CATIA has just come into use at Paul Morris Associates, the thirty-person architecture firm where Norfleet works; he is struggling with what it will mean for him, for his firm, for his profession. Computer-aided design is about creativity, but also about jurisdiction, about who controls the design process. In Architecture: The Story of Practice, Architectural theorist Dana Cuff writes that each generation of architects is educated to understand what constitutes a creative act and who in the system of their profession is empowered to use it and at what time. Creativity is socially constructed and Norfleet is coming of age as an architect in a time of technological but also social transition. He must come to terms with the increasingly complex computeraided design tools that have changed both creativity and the rules by which it can operate. In today’s practices, architects use computer-aided design software to produce threedimensional geometric models. Sometimes they use off-the-shelf commercial software like CATIA, sometimes they customize this software through plug-ins and macros, sometimes they work with software that they have themselves programmed. And yet, conforming to Larson’s ideas that they claim the higher ground by identifying with art and not with science, contemporary architects do not often use the term “simulation.” Rather, they have held onto traditional terms such as “modeling” to describe the buzz of new activity with digital technology. But whether or not they use the term, simulation is creating new architectural identities and transforming relationships among a range of design collaborators: masters and apprentices, students and teachers, technical experts and virtuoso programmers. These days, constructing an identity as an architect requires that one define oneself in relation to simulation. Case studies, primarily from two architectural firms, illustrate the transformation of traditional relationships, in particular that of master and apprentice, and the emergence of new roles, including a new professional identity, “keeper of the geometry,” defined by the fusion of person and machine. Like any profession, architecture may be seen as a system in flux. However, with their new roles and relationships, architects are learning that the fight for professional jurisdiction is increasingly for jurisdiction over simulation. Computer-aided design is changing professional patterns of production in architecture, the very way in which professionals compete with each other by making new claims to knowledge. Even today, employees at Paul Morris squabble about the role that simulation software should play in the office. Among other things, they fight about the role it should play in promotion and firm hierarchy. They bicker about the selection of new simulation software, knowing that choosing software implies greater power for those who are expert in it. Architects and their collaborators are in a continual struggle to define the creative roles that can bring them professional acceptance and greater control over design. New technologies for computer-aided design do not change this reality, they become players in it.
email
last changed 2009/01/07 08:05

_id 2005_155
id 2005_155
authors Mullins, Michael, Kirkegaard, Poul Henning, Jessen, Rasmus Zederkof and Klitgaard Jens
year 2005
title A Topology Optimization Approach to Learning in Architectural Design
source Digital Design: The Quest for New Paradigms [23nd eCAADe Conference Proceedings / ISBN 0-9541183-3-2] Lisbon (Portugal) 21-24 September 2005, pp. 155-162
doi https://doi.org/10.52842/conf.ecaade.2005.155
summary Topology optimization methods offer an interesting tool for architects and engineers as a rational basis for the choice of a structure’s initial form, particularly as developments in computer software are compatible with this approach. This can be argued from ecology, resource savings, static load design, financial and a number of other pragmatic reasons. But in an artistic/architectural perspective these are not decisive. Analogical design qualities include a tectonic appreciation of the properties of materials, metaphoric interpretation of intention and considerations of context. The paper describes an attempt to unify analytic and analogical approaches in an architectural education setting, using topology optimization software. It uses as examples recent student projects where the architectural design process based on a topology optimization approach has been investigated. The paper describes and presents results obtained by the students during the project. Further, a discussion is delivered concerning the improved understanding of tectonic design obtained by the student during the projects.
keywords Architectural Education, Topology Optimization, Tectonic Design
series eCAADe
email
last changed 2022/06/07 07:59

_id cf2005_2_33_220
id cf2005_2_33_220
authors PARK Hyoung-June, ECONOMOU Athanassios and PAPALAMBROS Panos
year 2005
title Hermes: A Computational Tool for Proportional Studies in Design
source Learning from the Past a Foundation for the Future [Special publication of papers presented at the CAAD futures 2005 conference held at the Vienna University of Technology / ISBN 3-85437-276-0], Vienna (Austria) 20-22 June 2005, pp. 99-108
summary A computational tool for proportional analysis and synthesis in architectural composition is presented. The various components of the software are briefly explained and two case studies, one in analysis and one in synthesis of form are presented. Both studies presented here are drawn from Palladio's second book of architecture.
keywords proportion, genetic algorithms, design optimization, Palladio
series CAAD Futures
email
last changed 2005/05/05 07:06

_id sigradi2006_e034d
id sigradi2006_e034d
authors Ryan, Rachel and Donn, Michael
year 2006
title A 3D, interactive, multilayered, web-enabled model as a tool for multiple sets of end user groups: A case study and end user analysis
source SIGraDi 2006 - [Proceedings of the 10th Iberoamerican Congress of Digital Graphics] Santiago de Chile - Chile 21-23 November 2006, pp. 392-396
summary This research undertakes a case study involving focus groups of potential end users, to identify how a successful digital tool could be created using new and emerging technologies, to accommodate the multiple needs of these end users. 2005 saw the completion of a research paper, which proposed that a single, 3 dimensional digital model of a city forming a core for many different information systems, is a better approach to the needs of the city than many individual models optimised for each information system. The case for the single 3D model was evaluated through the research, development, delivery and analysis of a prototype 3 Dimensional model of Wellington City, New Zealand, presenting different ‘views’ of information in Wellington: a rendered visualisation in an animated “walkthrough”; the impact of planning constraints on daylight; interactive “plots” of property values. The development and delivery of the prototype model was analysed in regards to how complex, costly and time consuming it may be to exploit one base model for several purposes; and also therefore how beneficial, affordable and potentially successful a single model may be. The prototype model was created to test the idea, and therefore provided conclusions based on a limited feasibility analysis - with four potential information layers modelled and two potential delivery methods tested. The prototype model and user analysis results were presented in a research report that suggested further research and development of a single model could be very beneficial: Positive feedback from potential end users and data providers, and examples of potential data mining opportunities forming the basis of the need for continued research. 2006 sees the research continue as an 18 month research project in conjunction with an industry partner, Terralink International, (http://www.terralink.co.nz/). Terralink International Limited provides GIS and mapping solutions which according to their web site: “enable better business management.” The company maintains a national resource of “imagery, cartography, and spatial databases” and provides consultancy services linking these to company databases through GIS systems. The research investigates the potential for 3 dimensional, interactive, multilayered models to enhance delivery of information to multiple end user groups. The research method uses functional prototypes in end-user focus group workshops. These workshops, consisting of a combination of presentations, hands on interactive examples, group discussions, and individual feedback surveys, aim to establish how a tool might best be developed to communicate to a wide range of end users. The means of delivery whether a stand alone tool or web-based is a key element of the user group workshop assessment process. Note: The submission of the prototype tool (via video or interactive media) would greatly increase the effectiveness of the research presentation. Ability to include such media would be greatly appreciated.
keywords multilayered; 3D; end users; interactive; web-enabled
series SIGRADI
email
last changed 2016/03/10 09:59

_id caadria2005_b_4c_a
id caadria2005_b_4c_a
authors Yu-Chung Cheng, Ji-Hyun Lee
year 2005
title Integrating scenario-based design and case-based design for user participation in Apartment plan design process
source CAADRIA 2005 [Proceedings of the 10th International Conference on Computer Aided Architectural Design Research in Asia / ISBN 89-7141-648-3] New Delhi (India) 28-30 April 2005, vol. 2, pp. 233-239
doi https://doi.org/10.52842/conf.caadria.2005.233
summary It has been a ubiquitous problem that users generally do not participate in housing design process. In Taiwan, however, apartment buyers have a chance to customize their plan until the construction takes place. This paper attempts to solve the problem about user participation in apartment plan design by integrating scenario-based design and case-based design approaches. We build an interactive computational tool for designers to support user participation in the apartment plan design process and to prove our concepts by some concrete examples.
series CAADRIA
email
last changed 2022/06/07 07:57

_id 2005_287
id 2005_287
authors Achten, Henri and Reymen, Isabelle
year 2005
title Structured Reflection as a Means to Deepen Understanding of CAAD
source Digital Design: The Quest for New Paradigms [23nd eCAADe Conference Proceedings / ISBN 0-9541183-3-2] Lisbon (Portugal) 21-24 September 2005, pp. 287-294
doi https://doi.org/10.52842/conf.ecaade.2005.287
summary In this paper we outline a strategy of structured reflection to improve reflection by students in a course on the implication of CAAD, design theory, and design methodology. Earlier editions of the course showed that students often did not evolve their learning beyond a checklist level. Reflection is an important mechanism to improve learning from design situations. After a consideration of the main approaches to design reflection, we take up Schön’s notion of reflection and provide support for structured reflection in CAAD education, based on earlier experiences with structured question lists in a civil engineering course. Findings after the first year’s run show a deeper level of reflection on a more elaborate level.
keywords Structured Reflection, CAAD, Education
series eCAADe
email
last changed 2022/06/07 07:54

_id ascaad2006_paper25
id ascaad2006_paper25
authors Artopoulos, Giorgos; Stanislav Roudavski and Francois Penz
year 2006
title Adaptive Generative Patterns: design and construction of Prague Biennale pavilion
source Computing in Architecture / Re-Thinking the Discourse: The Second International Conference of the Arab Society for Computer Aided Architectural Design (ASCAAD 2006), 25-27 April 2006, Sharjah, United Arab Emirates
summary This paper describes an experimental practice-based research project that considered design process, implementation and construction of a pavilion built to be part of the Performative Space section of the International Biennale of Contemporary Art, Prague 2005. The project was conceptualized as a time-bound performative situation with a parasite-like relationship to its host environment. Its design has emerged through an innovative iterative process that utilized digital simulative and procedural techniques and was formed in response to place-specific behavioral challenges. This paper presents the project as an in-depth case-study of digital methods in design, mass customization and unified methods of production. In particular, it considers the use of Voronoi patterns for production of structural elements providing detail on programming and construction techniques in relationship to design aspirations and practical constraints.
series ASCAAD
email
last changed 2007/04/08 19:47

_id 2005_131
id 2005_131
authors Bailey, Rohan
year 2005
title Digital Tools for Design Learning
source Digital Design: The Quest for New Paradigms [23nd eCAADe Conference Proceedings / ISBN 0-9541183-3-2] Lisbon (Portugal) 21-24 September 2005, pp. 131-138
doi https://doi.org/10.52842/conf.ecaade.2005.131
summary There is growing consensus among architectural critics and educators that there exists an increasing divide between the worlds of architectural education and practice. New social and cultural norms, new materials, and current global concerns, like sustainability, have largely influenced the need for an improved balance/integration between design theory and practice. This places schools of architecture around the world under pressure to provide their graduates with the requisite skills that support responsible design characterized by good design thinking strategies. The Caribbean School of Architecture, in addition to being affected by this predicament, has other pressures on its educational offerings. The region’s lack of resources and particular social issues mandates that graduates of the school adopt a responsible attitude towards design in the region. A positive attitude to such issues as sustainability, energy conservation and community will only come about through an effective transmission of particular architectural knowledge that is relevant to the region. The challenge (globally and in the Caribbean), therefore, is the provision of an innovative and effective way of supporting the student master dialogue in studio, facilitating the transfer of “practical, appropriate knowledge” needed by students to create safe, purposeful and responsible architecture. This paper exists within the research paradigm of providing digital teaching tools to beginning students of architecture. This digital research paradigm seeks to move digital technology (the computer) beyond functioning as an instrumental tool (in visualization, representation and fabrication) to becoming a “Socratic machine” that provides an appropriate environment for design learning. Research funds have been allocated to the author to research and develop the information component of the tool with special reference to the Caribbean. The paper will report on the results of prior investigations, describe the reaction and appreciation of the students and conclude with lessons learnt for the further development of the teaching tool.
keywords Design Education, Digital Design, Teaching Tools
series eCAADe
email
last changed 2022/06/07 07:54

_id acadia05_170
id acadia05_170
authors Barker, Daniel and Dong, Andy
year 2005
title A Representation Language for a Prototype CAD Tool for Intelligent Rooms
source Smart Architecture: Integration of Digital and Building Technologies [Proceedings of the 2005 Annual Conference of the Association for Computer Aided Design In Architecture / ISBN 0-9772832-0-8] Savannah (Georgia) 13-16 October 2005, pp. 170-183
doi https://doi.org/10.52842/conf.acadia.2005.170
summary Intelligent rooms are a type of intelligent environment which enhance ordinary activities within the confines of a room by responding to human interaction using pervasive and ubiquitous computing. In the design of intelligent rooms, the specification of how the intelligent room enacts intelligent behavior through computational means is as integral as the geometric description. The self-aware and context-aware capabilities of intelligent rooms extend the requirements for computer-aided design tools beyond 3D modeling of objects. This article presents a Hardware as Agents Description Language for Intelligent Rooms (HADLIR) to model hardware in an intelligent room as “hardware agents” having sensor and/or effector modalities with rules and goals. End-users describe intelligent room hardware as agents based on the HADLIR representation and write agent rules and goals in Jess for each hardware component. This HADLIR agent description and the requisite software sensors/effectors constitute “hardware agents” which are instantiated into a multi-agent society software environment. The society is then bridged to either a virtual environment to prototype the intelligent room or to microelectronic controllers to implement a physical intelligent room. The integration illustrates how the HADLIR representation assists in the design, simulation and implementation of an intelligent room and provides a foundation technology for CAD tools for the creation of intelligent rooms.
series ACADIA
email
last changed 2022/06/07 07:54

_id cf2005_1_73_113
id cf2005_1_73_113
authors BARRIOS Carlos
year 2005
title Transformations on Parametric Design Models
source Computer Aided Architectural Design Futures 2005 [Proceedings of the 11th International Conference on Computer Aided Architectural Design Futures / ISBN 1-4020-3460-1] Vienna (Austria) 20–22 June 2005, pp. 393-400
summary This paper presents a research in progress in the development of parametric models for generation of complex shapes, and introduces a methodology for exploration of possible designs generated from a single model. The research presents a case study on the designs of the Spanish architect Antonio Gaudi, and takes on the fundamental rules of form generation of the lateral nave columns of the Sagrada Familia temple in Barcelona. A parameterization schema is presented as a fundamental tool for design exploration, which allows the reproduction of the original shapes designed by Gaudi, and the generation of a large set of new designs.
keywords parametric modeling, parametric design, design transformations
series CAAD Futures
email
last changed 2006/11/07 07:27

_id acadia05_226
id acadia05_226
authors Biloria, N., Oosterhuis, K. and Aalbers, C.
year 2005
title Design Informatics
source Smart Architecture: Integration of Digital and Building Technologies [Proceedings of the 2005 Annual Conference of the Association for Computer Aided Design In Architecture / ISBN 0-9772832-0-8] Savannah (Georgia) 13-16 October 2005, pp. 226-235
doi https://doi.org/10.52842/conf.acadia.2005.226
summary The research paper exemplifies a novel information integrated design technique developed at ONL (Oosterhuis and Lenard), Netherlands, specifically appropriated for envisaging complex geometric forms. The ‘informed design technique’, apart from being highly instrumental in conceptualizing and generating the geometric component constituting architectural form in a parametric manner, is also efficiently utilized for precise computer aided manufacturing and construction of the speculated form. Geometric complexities inherent in contemporary architectural constructs and the time spent in appropriation of such topologies, fueled the ‘informed design’ approach, which caters to issues of timely construction, precision oriented design and production (visual and material) and parametric modeling attuned to budgetary fluctuations. This design-research approach has been tested and deployed by ONL, for conceiving ‘the Acoustic Barrier’ project, Utrecht Leidsche Rijn in the Netherlands and is treated as a generic case for exemplifying the ‘informed design’ technique in this research paper. The design methodology encourages visualizing architectural substantiations from a systems perspective and envisages upon a rule based adaptive systems approach involving extrapolation of contextual dynamics/ground data in terms of logical ‘rules’. These rules/conditionalities form the basis for spawning parametric logistics to be mapped upon geometric counterparts exemplifying the conception. The simulated parametric relations bind dimensional aspects (length, width, height etc.) of the geometric construct in a relational manner, eventually culminating in a 3D spatial envelope. This evolved envelope is subsequently intersected with a ‘parametric spatio-constructive grid’, creating specific intersecting points between the two. The hence extorted ‘point cloud’ configuration serves as a generic information field concerning highly specific coordinates, parameters and values for each individual point/constructive node it embodies. The relations between these points are directly linked with precise displacements of structural profiles and related scaling factors of cladding materials. Parallel to this object oriented modeling approach, a detailed database (soft/information component) is also maintained to administer the relations between the obtained points. To be able to derive constructible structural and cladding components from the point cloud configuration customized Scripts (combination of Lisp and Max scripts) process the point cloud database. The programmed script-routines, iteratively run calculations to generate steel-wireframes, steel lattice-structure and cladding panels along with their dimensions and execution drawing data. Optimization-routines are also programmed to make rectifications and small adjustments in the calculated data. This precise information is further communicated with CNC milling machines to manifest complex sectional profiles formulating the construct hence enabling timely and effective construction of the conceptualized form.
series ACADIA
email
last changed 2022/06/07 07:54

_id sigradi2005_355
id sigradi2005_355
authors Breutmann, Bernd; Mónica Inés Fernández, Ricardo Piégari, Roberto Guerrero, Adriane Borda Almeida da Silva, Neusa Rodrigues Félix, Alfredo Pina, Lore Huizi, Francisco José Serón Arbeloa, Pedro Latorre Andrés, Carlos Vaz de Carvalho, Marcelo Payssé Alvarez, Juan Pablo Portillo Burghi
year 2005
title Project “Network Alfa T-GAME L3: teaching computer graphics and multimedia, long-life learning” - Institutional and interdisciplinary outreach university services.
source SIGraDi 2005 - [Proceedings of the 9th Iberoamerican Congress of Digital Graphics] Lima - Peru 21-24 november 2005, vol. 1, pp. 355-361
summary The T-GAME L3 project intends to establish the possibility of cooperation within institutions focusing activities in the realm of continuous development in the area of Digital Graphics by making use: of new technologies, methods and learning processes related to half-time distance and total distance teaching. The programs offered will be customized to each particular country and academic environment by sharing the digital teaching resources of the network members. This will allow an academic program of formative continuity. Based on the seminar’s subject, our visualization sense will be a basic component for a massive training of an educational program, proposing a model of institutional outreach university service. This will allow for the presentation of contents oriented to distance learning in the field of Architecture. [Full paper in Spanish]
series SIGRADI
email
last changed 2016/03/10 09:47

For more results click below:

this is page 0show page 1show page 2show page 3show page 4show page 5... show page 27HOMELOGIN (you are user _anon_203630 from group guest) CUMINCAD Papers Powered by SciX Open Publishing Services 1.002