Cumincad : CUMINCAD Papers : Search Results

CumInCAD is a Cumulative Index about publications in Computer Aided Architectural Design
supported by the sibling associations ACADIA, CAADRIA, eCAADe, SIGraDi, ASCAAD and CAAD futures

PDF papers
References

Hits 1 to 20 of 550

Reformat results as: short short into frame detailed detailed into frame

_id	791f
id	791f
authors	Stellingwerff, M. C.
year	2005
title	VIRTUAL CONTEXT - INVESTIGATING THE CHARACTERISTICS AND OPPORTUNITIES OF DIGITAL VISUALISATION MEDIA FOR SITUATED APPROACHES TO ARCHITECTURAL DESIGN IN AN URBAN ENVIRONMENT
source	Delft University Press
summary	This research initiative addresses the issue of Design in relation to Virtual Context. Central to this study are the innovative potentials and instrumental opportunities of computer based media techniques, capable of generating interactive models and changing perspectives for the benefit of urban and architectural design. The ambition was to not only make a contribution to the existing body of knowledge concerning digital technologies and their applications, but explore theoretical conditions which might help define and stimulate further study. From the outset, the focus was on furthering the opportunities for computer based representation media in creative design. On the basis of a series of explorative studies the subject of this research was targeted: the issue of Design in Context, or more specifically: Design(ing) in a Virtual Context. During the process there was a marked shift in the conception of the subject from – more or less immersive – VR technologies in the direction of approaches which might be expected to become readily available in practice and education and could be effective in actual design processes. This insight also brought about a shift in emphasis from realism per-se towards creating a sense of situatedness. The design representation system which was developed was intended to not just allow for one type of model view, but to afford an array of different views, from which the designer would be able to choose freely, depending on the phase and focus of design as well as personal preferences. A series of interface prototypes and support tools were developed especially and successively tested experimentally. For the intended final design driven experimental study, different virtual context models were considered. Eventually, an integral – purely fictitious – design ‘environment’ was constructed in the computer, so that the workings of the proposed system and its components would be tested systematically. A conscious choice was made for an in depth study, on a relatively modest scale, which would a certain amount of mutual involvement between designer and researcher, to confront the participants with the finer aspects of the proposed system in a relatively short time and to gather detailed data. A half dozen design professionals were invited to participate in a closely monitored experimental exercise. The results of this study therefore do not offer straightforward, indisputable facts, to be considered representative for the design community as a whole, but indicate that the working methods of the individual designers – when discovering aspects of the site, developing and presenting proposals and reflecting on the qualities of represented designs – tend to vary considerably. For this reason the interactive representation system proved to be of value. Participants could express different view preferences, with more or less realistic image modes being used in different phases of their design developments, with varying experiences of situatedness. Some of the design professionals participants were very appreciative of the system’s opportunities, others tended to be more ‘set in their ways’. The results of this experimental study indicate that there may particularly be opportunities for interface applications which are able to function interactively, offering individual designers – as well as others involved in evaluating design proposals – a variety of tools with which to approach specific design artefacts in their changing contexts. Virtual models can play not only an important role as a ‘reminder’ for the designer but also to other parties playing an active role in the design and implementation processes. Interactive environment models are not only promising as exploration tools for existing sites, but could be valuable to test the impact of a design on its location. This could be especially interesting if the site is difficult or impossible to visit or as yet a virtual construction. In addition such an approach might be beneficial for objective comparison and evaluation of design proposals in competitions and in education as well as in on-line collaborative design projects where the context is still in the process of being developed.
series	thesis:PhD
type	normal paper
email
more	http://www.bk.tudelft.nl/users/stelling/internet/
last changed	2005/03/02 22:40

_id	ascaad2014_023
id	ascaad2014_023
authors	Al-Maiyah, Sura and Hisham Elkadi
year	2014
title	Assessing the Use of Advanced Daylight Simulation Modelling Tools in Enhancing the Student Learning Experience
source	Digital Crafting [7th International Conference Proceedings of the Arab Society for Computer Aided Architectural Design (ASCAAD 2014 / ISBN 978-603-90142-5-6], Jeddah (Kingdom of Saudi Arabia), 31 March - 3 April 2014, pp. 303-313
summary	In architecture schools, where the ‘studio culture’ lies at the heart of students’ learning, taught courses, particularly technology ones, are often seen as secondary or supplementary units. Successful delivery of such courses, where students can act effectively, be motivated and engaged, is a rather demanding task requiring careful planning and the use of various teaching styles. A recent challenge that faces architecture education today, and subsequently influences the way technology courses are being designed, is the growing trend in practice towards environmentally responsive design and the need for graduates with new skills in sustainable construction and urban ecology (HEFCE’s consultation document, 2005). This article presents the role of innovative simulation modelling tools in the enhancement of the student learning experience and professional development. Reference is made to a teaching practice that has recently been applied at Portsmouth School of Architecture in the United Kingdom and piloted at Deakin University in Australia. The work focuses on the structure and delivery of one of the two main technology units in the second year architecture programme that underwent two main phases of revision during the academic years 2009/10 and 2010/11. The article examines the inclusion of advanced daylight simulation modelling tools in the unit programme, and measures the effectiveness of enhancing its delivery as a key component of the curriculum on the student learning experience. A main objective of the work was to explain whether or not the introduction of a simulation modelling component, and the later improvement of its integration with the course programme and assessment, has contributed to a better learning experience and level of engagement. Student feedback and the grade distribution pattern over the last three academic years were collected and analyzed. The analysis of student feedback on the revised modelling component showed a positive influence on the learning experience and level of satisfaction and engagement. An improvement in student performance was also recorded over the last two academic years and following the implementation of new assessment design.
series	ASCAAD
email
last changed	2016/02/15 13:09

_id	2005_131
id	2005_131
authors	Bailey, Rohan
year	2005
title	Digital Tools for Design Learning
source	Digital Design: The Quest for New Paradigms [23nd eCAADe Conference Proceedings / ISBN 0-9541183-3-2] Lisbon (Portugal) 21-24 September 2005, pp. 131-138
doi	https://doi.org/10.52842/conf.ecaade.2005.131
summary	There is growing consensus among architectural critics and educators that there exists an increasing divide between the worlds of architectural education and practice. New social and cultural norms, new materials, and current global concerns, like sustainability, have largely influenced the need for an improved balance/integration between design theory and practice. This places schools of architecture around the world under pressure to provide their graduates with the requisite skills that support responsible design characterized by good design thinking strategies. The Caribbean School of Architecture, in addition to being affected by this predicament, has other pressures on its educational offerings. The region’s lack of resources and particular social issues mandates that graduates of the school adopt a responsible attitude towards design in the region. A positive attitude to such issues as sustainability, energy conservation and community will only come about through an effective transmission of particular architectural knowledge that is relevant to the region. The challenge (globally and in the Caribbean), therefore, is the provision of an innovative and effective way of supporting the student master dialogue in studio, facilitating the transfer of “practical, appropriate knowledge” needed by students to create safe, purposeful and responsible architecture. This paper exists within the research paradigm of providing digital teaching tools to beginning students of architecture. This digital research paradigm seeks to move digital technology (the computer) beyond functioning as an instrumental tool (in visualization, representation and fabrication) to becoming a “Socratic machine” that provides an appropriate environment for design learning. Research funds have been allocated to the author to research and develop the information component of the tool with special reference to the Caribbean. The paper will report on the results of prior investigations, describe the reaction and appreciation of the students and conclude with lessons learnt for the further development of the teaching tool.
keywords	Design Education, Digital Design, Teaching Tools
series	eCAADe
email
last changed	2022/06/07 07:54

_id	2005_253
id	2005_253
authors	Breen, Jack and Stellingwerff, Martijn
year	2005
title	Towards Ornamatics
source	Digital Design: The Quest for New Paradigms [23nd eCAADe Conference Proceedings / ISBN 0-9541183-3-2] Lisbon (Portugal) 21-24 September 2005, pp. 253-260
doi	https://doi.org/10.52842/conf.ecaade.2005.253
summary	Computer aided modelling and drafting protocols – in combination with new production technologies – have contributed to wholly new ways of shaping building elements. Some examples of new techniques, which have recently become very successful in building production and in architectural design education, are: 3D Rapid Prototyping; 2,5D and 3D Milling and computer aided Shape Cutting (notably using laser and water jet modes). Such new approaches not only create new opportunities for traditional production processes (including physical modelling), they also offer new perspectives for design and manufacturing on the level of architectural components and connections. We foresee innovative approaches to building product design, with a renewed interest in expressive Ornamentation. A phenomenological development we would like to address using the concept of ‘Ornamatics’. This contribution explores the potentials of product design with a renewed focus on ornamentation, involving the active utilization of computer aided modelling and manufacturing techniques. The paper furthermore documents results and findings of a series of explorative studies carried out within an educational laboratory environment.
keywords	Design Driven Research; Computer Aided Fabrication; Aesthetics; Ornamentation; Education
series	eCAADe
email
last changed	2022/06/07 07:54

_id	2005_269
id	2005_269
authors	Caldas, Luisa and Duarte, José
year	2005
title	Fabricating Ceramic Covers
source	Digital Design: The Quest for New Paradigms [23nd eCAADe Conference Proceedings / ISBN 0-9541183-3-2] Lisbon (Portugal) 21-24 September 2005, pp. 269-276
doi	https://doi.org/10.52842/conf.ecaade.2005.269
summary	This paper describes a studio experiment developed with the aim of exploring the design and fabrication of innovative roof systems based on ceramic tiles using digital technologies. History is rich in examples of the use of ceramic roof tiles since the ancient world. Today’s systems derive from such ancient systems and fall into several basic categories depending on the form of the tiles and how they interlock. These systems present acceptable functional performances due to centuries of refinement, but as they have suffered little formal evolution in recent centuries, to respond to modern needs they require complex layering and assemblies. Recent technological evolution has emphasized the optimization of the tile production process in terms of time saving and cost reduction, and the improvement of product quality in terms of material homogeneity and durability. Little attention has been paid to the tile form and the roof system as a whole, including the assembly process. As a result, despite the variety and performance of existing designs, they are often perceived as outdated by architects who refuse to use them following a stylistic trend in architectural design towards primary forms and flat roofs. The challenge of the experiment was to take advantage of digital design and fabrication technology to conceive systems with improved performance and contemporary designs. The hope was that this could lead architects to consider integrating roof tiles systems in their architectural proposals. Results yielded five different roof systems. These systems are innovative from a formal viewpoint both at the tile and roof level. In addition, they are easy to assemble and possess better thermal and water-proofing performance. Digital technologies were determinant to enable students to design the complex shape of the tiles, to manipulate them into assemblies, and to assess the shape of the roofs, as well as their thermal and structural performance in some cases.
keywords	Design Education; Rapid Prototyping; Collaboration; Ceramics; Innovation; Tiles
series	eCAADe
email
last changed	2022/06/07 07:54

_id	ascaad2012_003
id	ascaad2012_003
authors	Elseragy, Ahmed
year	2012
title	Creative Design Between Representation and Simulation
source	CAAD \| INNOVATION \| PRACTICE [6th International Conference Proceedings of the Arab Society for Computer Aided Architectural Design (ASCAAD 2012 / ISBN 978-99958-2-063-3], Manama (Kingdom of Bahrain), 21-23 February 2012, pp. 11-12
summary	Milestone figures of architecture all have their different views on what comes first, form or function. They also vary in their definitions of creativity. Apparently, creativity is very strongly related to ideas and how they can be generated. It is also correlated with the process of thinking and developing. Creative products, whether architectural or otherwise, and whether tangible or intangible, are originated from ‘good ideas’ (Elnokaly, Elseragy and Alsaadani, 2008). On one hand, not any idea, or any good idea, can be considered creative but, on the other hand, any creative result can be traced back to a good idea that initiated it in the beginning (Goldschmit and Tatsa, 2005). Creativity in literature, music and other forms of art is immeasurable and unbounded by constraints of physical reality. Musicians, painters and sculptors do not create within tight restrictions. They create what becomes their own mind’s intellectual property, and viewers or listeners are free to interpret these creations from whichever angle they choose. However, this is not the case with architects, whose creations and creative products are always bound with different physical constraints that may be related to the building location, social and cultural values related to the context, environmental performance and energy efficiency, and many more (Elnokaly, Elseragy and Alsaadani, 2008). Remarkably, over the last three decades computers have dominated in almost all areas of design, taking over the burden of repetitive tasks so that the designers and students can focus on the act of creation. Computer aided design has been used for a long time as a tool of drafting, however in this last decade this tool of representation is being replaced by simulation in different areas such as simulation of form, function and environment. Thus, the crafting of objects is moving towards the generation of forms and integrated systems through designer-authored computational processes. The emergence and adoption of computational technologies has significantly changed design and design education beyond the replacement of drawing boards with computers or pens and paper with computer-aided design (CAD) computer-aided engineering (CAE) applications. This paper highlights the influence of the evolving transformation from Computer Aided Design (CAD) to Computational Design (CD) and how this presents a profound shift in creative design thinking and education. Computational-based design and simulation represent new tools that encourage designers and artists to continue progression of novel modes of design thinking and creativity for the 21st century designers. Today computational design calls for new ideas that will transcend conventional boundaries and support creative insights through design and into design. However, it is still believed that in architecture education one should not replace the design process and creative thinking at early stages by software tools that shape both process and final product which may become a limitation for creative designs to adapt to the decisions and metaphors chosen by the simulation tool. This paper explores the development of Computer Aided Design (CAD) to Computational Design (CD) Tools and their impact on contemporary design education and creative design.
series	ASCAAD
email
more	http://www.ascaad.org/conference/2012/papers/ascaad2012_003.pdf
last changed	2012/05/15 20:46

_id	caadria2005_a_7c_a
id	caadria2005_a_7c_a
authors	Anandan Karunakaran
year	2005
title	Organisation of Pedestrian Movements: an Agent-Based Approach
source	CAADRIA 2005 [Proceedings of the 10th International Conference on Computer Aided Architectural Design Research in Asia / ISBN 89-7141-648-3] New Delhi (India) 28-30 April 2005, vol. 1, pp. 305-313
doi	https://doi.org/10.52842/conf.caadria.2005.305
summary	Cities are becoming more complex in this digital era due to technological changes. Thinking of cities without such technological changes is equivalent to an embryonic state in the morphology of city growth, that is, the growth seems less advanced. So it is appropriate to think of the non digital city digitally. Urban design is one state which establishes the perfect relationship between the street, people and building. The relationship of the people with the building and street is becoming one of the key factors in architecture. It has been observed that the design of a city has been influenced by the pedestrian movement. Many cities prior to the industrial era were largely determined by the social interactions based on walking. Thus the pedestrians play a key role in the formation of the city. They are a very important component in any representation of transport movements. They generally terminate or initiate a chain of linked activities, and if observed carefully, a single pedestrian movement is meant to include various sub journeys from one location to another. In order to organize pedestrians, we need to understand the pedestrian movement system. Though there is a lot of development of urban models in this aspect, it is still in a nascent state in comparison with the digital advancement. Thus much research work is carried out which can be applied to any given environmental setting, and as a result urban designers can respond to the changing socio-cultural technologies.
series	CAADRIA
last changed	2022/06/07 07:54

_id	acadia05_078
id	acadia05_078
authors	Fox, Michael and Hu, Catherine
year	2005
title	Starting From The Micro: A Pedagogical Approach to Designing Interactive Architecture
source	Smart Architecture: Integration of Digital and Building Technologies [Proceedings of the 2005 Annual Conference of the Association for Computer Aided Design In Architecture / ISBN 0-9772832-0-8] Savannah (Georgia) 13-16 October 2005, pp. 78-93
doi	https://doi.org/10.52842/conf.acadia.2005.078
summary	The paper outlines a pedagogical approach whereby a number of technology-intensive skills can be quickly learned to a level of useful practicality through a series of discrete, yet cumulative explorations with the design goal of creating intelligently responsive architectural systems. The culmination of such explorations in creating full-scale interactive architectural environments leads to a relatively unexplored area of negotiation whereby individual systems must necessarily manage environmental input to mediate a behavioural output. The emerging area of interactive architecture serves as a practical means for inventing entirely new ways of developing spaces, and the designing and building environments that address dynamic, flexible and constantly changing needs. Interactive architecture is defined here as spaces and objects that can physically re-configure themselves to meet changing needs. The central issues explored are human and environmental interaction and behaviours, embedded computational infrastructures, kinetic and mechanical systems and physical control mechanisms. Being both multidisciplinary and technology-intensive in nature, architects need to be equipped with at least a base foundational knowledge in a number of domains in order to be able to develop the skills necessary to explore, conceive, and design such systems. The teaching methods were carried out with a group of undergraduate design students who had no previous experience in mechanical engineering, electronics, programming, or kinetic design with the goal of creating a responsive kinetic system that can demonstrate physical interactive behaviours on an applicable architectural scale. We found the approach to be extremely successful in terms of psychologically demystifying unfamiliar and often daunting technologies, while simultaneously clarifying the larger architectural implications of the novel systems that had been created. The authors summarize the processes and tools that architects and designers can utilize in creating and demonstrating of such systems and the implications of adopting a more active role in directing the development of this new area of design.
series	ACADIA
email
last changed	2022/06/07 07:50

_id	caadria2005_b_6c_e
id	caadria2005_b_6c_e
authors	Julio Bermudez, Albert C. Smith, Seth Striefel
year	2005
title	Visualizing the Invisible: Digital Studies on Representing Non-Visual Architectural Experiences
source	CAADRIA 2005 [Proceedings of the 10th International Conference on Computer Aided Architectural Design Research in Asia / ISBN 89-7141-648-3] New Delhi (India) 28-30 April 2005, vol. 2, pp. 510-515
doi	https://doi.org/10.52842/conf.caadria.2005.510
summary	During the last several years our architecture school has gone through the process of fully digitizing the studios. We, as faculty are learning much about the advantages and difficulties of teaching architectural design in this new electronic environment. This knowledge has been included in our development of a beginning design communications course that offers an important improvement in regards to our changing teaching situation. This short paper presents one project from this course that introduces our students to the use of digital media for dealing with non-visual and subjective content —something quite contrary to what is usually associated with the teaching of digital graphics. We believe that this project breaks new ground for teaching and investigating the nature of computer graphics and through it into the very essence of our experience and understanding of architecture.
series	CAADRIA
email
last changed	2022/06/07 07:52

_id	cdc2008_243
id	cdc2008_243
authors	Loukissas, Yanni
year	2008
title	Keepers of the Geometry: Architects in a Culture of Simulation
source	First International Conference on Critical Digital: What Matters(s)? - 18-19 April 2008, Harvard University Graduate School of Design, Cambridge (USA), pp. 243-244
summary	“Why do we have to change? We’ve been building buildings for years without CATIA?” Roger Norfleet, a practicing architect in his thirties poses this question to Tim Quix, a generation older and an expert in CATIA, a computer-aided design tool developed by Dassault Systemes in the early 1980’s for use by aerospace engineers. It is 2005 and CATIA has just come into use at Paul Morris Associates, the thirty-person architecture firm where Norfleet works; he is struggling with what it will mean for him, for his firm, for his profession. Computer-aided design is about creativity, but also about jurisdiction, about who controls the design process. In Architecture: The Story of Practice, Architectural theorist Dana Cuff writes that each generation of architects is educated to understand what constitutes a creative act and who in the system of their profession is empowered to use it and at what time. Creativity is socially constructed and Norfleet is coming of age as an architect in a time of technological but also social transition. He must come to terms with the increasingly complex computeraided design tools that have changed both creativity and the rules by which it can operate. In today’s practices, architects use computer-aided design software to produce threedimensional geometric models. Sometimes they use off-the-shelf commercial software like CATIA, sometimes they customize this software through plug-ins and macros, sometimes they work with software that they have themselves programmed. And yet, conforming to Larson’s ideas that they claim the higher ground by identifying with art and not with science, contemporary architects do not often use the term “simulation.” Rather, they have held onto traditional terms such as “modeling” to describe the buzz of new activity with digital technology. But whether or not they use the term, simulation is creating new architectural identities and transforming relationships among a range of design collaborators: masters and apprentices, students and teachers, technical experts and virtuoso programmers. These days, constructing an identity as an architect requires that one define oneself in relation to simulation. Case studies, primarily from two architectural firms, illustrate the transformation of traditional relationships, in particular that of master and apprentice, and the emergence of new roles, including a new professional identity, “keeper of the geometry,” defined by the fusion of person and machine. Like any profession, architecture may be seen as a system in flux. However, with their new roles and relationships, architects are learning that the fight for professional jurisdiction is increasingly for jurisdiction over simulation. Computer-aided design is changing professional patterns of production in architecture, the very way in which professionals compete with each other by making new claims to knowledge. Even today, employees at Paul Morris squabble about the role that simulation software should play in the office. Among other things, they fight about the role it should play in promotion and firm hierarchy. They bicker about the selection of new simulation software, knowing that choosing software implies greater power for those who are expert in it. Architects and their collaborators are in a continual struggle to define the creative roles that can bring them professional acceptance and greater control over design. New technologies for computer-aided design do not change this reality, they become players in it.
email
last changed	2009/01/07 08:05

_id	sigradi2005_427
id	sigradi2005_427
authors	Tannuré, Abel E.
year	2005
title	Shadow and digital system: digital techniques and architecture
source	SIGraDi 2005 - [Proceedings of the 9th Iberoamerican Congress of Digital Graphics] Lima - Peru 21-24 november 2005, vol. 1, pp. 427-432
summary	The system proposes to apply the results of the investigation in the task of architecture de-structurizing the idea in order to free the capacity of thought. One works in a three-dimensional way with models built, using discarded material. It is processed by means of digital media, giving a series of images which have been selected. One uses on them different systems of lighting changing the number of lights, the position in space and the distances. Like that one obtains different shadows on a surface; those shadows work in similar form with “eyes” of possible architectural forms. They are digitally processed according to the desired objectives. Several of them are combined adding and removing elements, which makes them dynamic in time. This technique tries to develop a new tool for students who may find the idea spontaneously, with the freedom of thought in three-dimensions like a new form of looking at architecture. [Full paper in Spanish]
series	SIGRADI
email
last changed	2016/03/10 10:01

_id	caadria2005_a_7b_a
id	caadria2005_a_7b_a
authors	Abdullah, A.Q.M. ; Md. Emran Hossain, Md. Shabab Habib Khan
year	2005
title	Digital Perception, Development and Presentation in Architecture: a study of Bangladesh with global context
source	CAADRIA 2005 [Proceedings of the 10th International Conference on Computer Aided Architectural Design Research in Asia / ISBN 89-7141-648-3] New Delhi (India) 28-30 April 2005, vol. 1, pp. 255-267
doi	https://doi.org/10.52842/conf.caadria.2005.255
summary	In the recent past the computer has become an important tool in both the design and presentation media/method in architecture. In this paper digitalization in architectural practice and architectural education in both the global and Bangladesh contexts have been studied. A survey questionnaire was carried out to find how and to what extent available software are being used in Bangladesh for this purpose. Opinion, views, expectations of architects from leading architectural firms of Bangladesh were studied to understand the future prospect of this field in Bangladesh.
series	CAADRIA
email
last changed	2022/06/07 07:54

_id	acadia05_012
id	acadia05_012
authors	Anshuman, Sachin
year	2005
title	Responsiveness and Social Expression; Seeking Human Embodiment in Intelligent Façades
source	Smart Architecture: Integration of Digital and Building Technologies [Proceedings of the 2005 Annual Conference of the Association for Computer Aided Design In Architecture / ISBN 0-9772832-0-8] Savannah (Georgia) 13-16 October 2005, pp. 12-23
doi	https://doi.org/10.52842/conf.acadia.2005.012
summary	This paper is based on a comparative analysis of some twenty-six intelligent building facades and sixteen large media-facades from a socio-psychological perspective. It is not difficult to observe how deployment of computational technologies have engendered new possibilities for architectural production to which surface-centeredness lies at that heart of spatial production during design, fabrication and envelope automation processes. While surfaces play a critical role in contemporary social production (information display, communication and interaction), it is important to understand how the relationships between augmented building surfaces and its subjects unfold. We target double-skin automated facades as a distinct field within building-services and automation industry, and discuss how the developments within this area are over-occupied with seamless climate control and energy efficiency themes, resulting into socially inert mechanical membranes. Our thesis is that at the core of the development of automated façade lies the industrial automation attitude that renders the eventual product socially less engaging and machinic. We illustrate examples of interactive media-façades to demonstrate how architects and interaction designers have used similar technology to turn building surfaces into socially engaging architectural elements. We seek opportunities to extend performative aspects of otherwise function driven double-skin façades for public expression, informal social engagement and context embodiment. Towards the end of the paper, we propose a conceptual model as a possible method to address the emergent issues. Through this paper we intend to bring forth emergent concerns to designing building membrane where technology and performance are addressed through a broader cultural position, establishing a continual dialogue between the surface, function and its larger human context.
series	ACADIA
email
last changed	2022/06/07 07:54

_id	ijac20053202
id	ijac20053202
authors	Ataman, Osman
year	2005
title	Integrating Digital and Building Technologies: Towards a New Architectural Composite
source	International Journal of Architectural Computing vol. 3 - no. 2, 181-190
summary	This paper presents an ongoing research project about the development of the materials and fabrication techniques for a fundamentally new class of architectural composite. This type of composite, which is a representative example of an even broader class of smart architectural material, has the potential to change the design and function of an architectural structure or living environment. As of today, this kind of composite does not exist. Once completed, this will be the first technology on its own. We believe this study will lay the fundamental groundwork for a new paradigm in surface engineering that may be of considerable significance in architecture, building and construction industry, and materials science.
series	journal
more	http://www.multi-science.co.uk/ijac.htm
last changed	2007/03/04 07:08

_id	caadria2005_a_1a_b
id	caadria2005_a_1a_b
authors	B. Senyapili, I. Basa
year	2005
title	RECONCILING COMPUTER AND HAND: THE CASE OF AUTHOR IDENTITY IN DESIGN PRESENTATIONS
source	CAADRIA 2005 [Proceedings of the 10th International Conference on Computer Aided Architectural Design Research in Asia / ISBN 89-7141-648-3] New Delhi (India) 28-30 April 2005, vol. 1, pp. 13-22
doi	https://doi.org/10.52842/conf.caadria.2005.013
summary	As computers were newly emerging in the field of architectural design, it was claimed that the impact of computers would change the way architects design and present. However, within the course of computer use in design, although the field of architectural practice might have been altered extremely, in architectural education there still seems to be a bond to conventional mind-hand-paper relation. One of the reasons for that bond is the fact that although being r 1000 elated to many technologies, architecture essentially positions itself around an artistic core that is still fed with conventional modes of creation. Architectural education aims at adopting and working on this very core. One of the major contributors in the formation of this core is the presence of author identity. This paper makes a critical approach to computers in terms of expressing author identity in design presentations especially during design education. We believe that the author identity is important in design education in terms of identifying the potential and skills of the student. Especially in design education the final step of design process turns out to be the presentation, unlike architectural practice where the presented design is actually built. Within this conception, two different studies were held in an educational environment with 160 design students and 20 design instructors. The results of both studies pointed at the fact that the digital opportunities that exist for design education should evolve around preserving and underlining the author identity in design presentations.
series	CAADRIA
type	normal paper
email
last changed	2022/06/07 07:54

_id	2005_163
id	2005_163
authors	Balakrishnan, Bimal, Kalisperis, Loukas N. and Muramoto, Katsuhiko
year	2005
title	Evaluating Workflow and Modeling Strategies of Pen Computing in the Beginning Architectural Design Studio
source	Digital Design: The Quest for New Paradigms [23nd eCAADe Conference Proceedings / ISBN 0-9541183-3-2] Lisbon (Portugal) 21-24 September 2005, pp. 163-170
doi	https://doi.org/10.52842/conf.ecaade.2005.163
summary	This paper investigates the impact of Tablet PCs on the workflow in an undergraduate design studio. We examined how well the students adapted the Tablet PC into their day-to-day design work and evaluated the appropriateness of the Tablet PC as a common digital tool used in an architectural design studio. This research involved observation of student behavior during the semester and the conducting of a survey measuring various aspects of the students’ use of the computers. A more specific goal was to compare the effectiveness of the pen versus the mouse as input devices for a three-dimensional modeling task in terms of both task time and strategies. Our assumption was that a change in input mode would affect the strategies and the performance. The results of a within-subjects, repeated-measures experiment carried out to elicit differences in input devices are discussed.
keywords	Digital Design Education; Human-Computer Interaction; 3D Modeling; Pen Computing; Task Analysis
series	eCAADe
email
last changed	2022/06/07 07:54

_id	cf2011_p170
id	cf2011_p170
authors	Barros, Mário; Duarte José, Chaparro Bruno
year	2011
title	Thonet Chairs Design Grammar: a Step Towards the Mass Customization of Furniture
source	Computer Aided Architectural Design Futures 2011 [Proceedings of the 14th International Conference on Computer Aided Architectural Design Futures / ISBN 9782874561429] Liege (Belgium) 4-8 July 2011, pp. 181-200.
summary	The paper presents the first phase of research currently under development that is focused on encoding Thonet design style into a generative design system using a shape grammar. The ultimate goal of the work is the design and production of customizable chairs using computer assisted tools, establishing a feasible practical model of the paradigm of mass customization (Davis, 1987). The current research step encompasses the following three steps: (1) codification of the rules describing Thonet design style into a shape grammar; (2) implementing the grammar into a computer tool as parametric design; and (3) rapid prototyping of customized chair designs within the style. Future phases will address the transformation of the Thonet’s grammar to create a new style and the production of real chair designs in this style using computer aided manufacturing. Beginning in the 1830’s, Austrian furniture designer Michael Thonet began experimenting with forming steam beech, in order to produce lighter furniture using fewer components, when compared with the standards of the time. Using the same construction principles and standardized elements, Thonet produced different chairs designs with a strong formal resemblance, creating his own design language. The kit assembly principle, the reduced number of elements, industrial efficiency, and the modular approach to furniture design as a system of interchangeable elements that may be used to assemble different objects enable him to become a pioneer of mass production (Noblet, 1993). The most paradigmatic example of the described vision of furniture design is the chair No. 14 produced in 1858, composed of six structural elements. Due to its simplicity, lightness, ability to be stored in flat and cubic packaging for individual of collective transportation, respectively, No. 14 became one of the most sold chairs worldwide, and it is still in production nowadays. Iconic examples of mass production are formally studied to provide insights to mass customization studies. The study of the shape grammar for the generation of Thonet chairs aimed to ensure rules that would make possible the reproduction of the selected corpus, as well as allow for the generation of new chairs within the developed grammar. Due to the wide variety of Thonet chairs, six chairs were randomly chosen to infer the grammar and then this was fine tuned by checking whether it could account for the generation of other designs not in the original corpus. Shape grammars (Stiny and Gips, 1972) have been used with sucesss both in the analysis as in the synthesis of designs at different scales, from product design to building and urban design. In particular, the use of shape grammars has been efficient in the characterization of objects’ styles and in the generation of new designs within the analyzed style, and it makes design rules amenable to computers implementation (Duarte, 2005). The literature includes one other example of a grammar for chair design by Knight (1980). In the second step of the current research phase, the outlined shape grammar was implemented into a computer program, to assist the designer in conceiving and producing customized chairs using a digital design process. This implementation was developed in Catia by converting the grammar into an equivalent parametric design model. In the third phase, physical models of existing and new chair designs were produced using rapid prototyping. The paper describes the grammar, its computer implementation as a parametric model, and the rapid prototyping of physical models. The generative potential of the proposed digital process is discussed in the context of enabling the mass customization of furniture. The role of the furniture designer in the new paradigm and ideas for further work also are discussed.
keywords	Thonet; furniture design; chair; digital design process; parametric design; shape grammar
series	CAAD Futures
email
last changed	2012/02/11 19:21

_id	sigradi2005_720
id	sigradi2005_720
authors	Bermudez, Julio; Jim Agutter
year	2005
title	Data Architecture Studio: Premises, Pedagogy, and Results
source	SIGraDi 2005 - [Proceedings of the 9th Iberoamerican Congress of Digital Graphics] Lima - Peru 21-24 november 2005, vol. 2, pp. 720-724
summary	Information Visualization (InfoVis) is the field devoted to the study of methods for displaying data in information-rich domains. Although most of the InfoVis solutions have been developed by scientists and engineers, artists and designers have began to bring in their expertise to advance the state of the art. The role that architects may play in this development could be substantial. Yet, participating in this new design frontier means to master skills and knowledge not necessarily covered by traditional architectural education. This paper presents a four-year effort devoted to develop such InfoVis curricula in an architectural context. The course encodes knowledge harvested over almost 10 year of InfoVis research bridging 5 disciplines and delivering many successful academic, technological, and commercial products. In particular, the class investigates the use of architecture as (1) a fundamental data organizational device and (2) a research method of examination, response, and communication for InfoVis problems.
series	SIGRADI
email
last changed	2016/03/10 09:47

_id	sigradi2005_225
id	sigradi2005_225
authors	Bianchi, Alejandra S.
year	2005
title	Education and innovation: present and future of teacher’s practice in digital graphic
source	SIGraDi 2005 - [Proceedings of the 9th Iberoamerican Congress of Digital Graphics] Lima - Peru 21-24 november 2005, vol. 1, pp. 225-229
summary	This is a qualitative research about the “educative training process” of Digital Graphic students, in the Architectural Department of Nordeste University- Argentina. The specific aim is “to know in depth the elements that influence in the educative training process in digital graphics”, to guide the propose of new teaching strategies to make better the teaching- learning process. The studied universe includes two architecture -students groups that are coursing first and second year of the career, since 2004. The first analysis categories, allow us to find out the meaning that pupils give to the facts, to build the training process dialectic. [Full paper in Spanish]
series	SIGRADI
email
last changed	2016/03/10 09:47

_id	2005_441
id	2005_441
authors	Biloria, Nimish
year	2005
title	Emergent Technologies and Design
source	Digital Design: The Quest for New Paradigms [23nd eCAADe Conference Proceedings / ISBN 0-9541183-3-2] Lisbon (Portugal) 21-24 September 2005, pp. 441-447
doi	https://doi.org/10.52842/conf.ecaade.2005.441
summary	The recurrent issue of materializing a responsive architectural spatiality, emergent, in its conception and the need for collaborative substantiation of the design process, utilizing a multidisciplinary approach towards developing intelligent architectonics are exemplified upon in this research paper through a design research experiments conducted by the author: Developing concept prototypes for electronic media augmented spatial skins. The augmented skin project exemplifies a synergetic merger of scientific investigations into the fields of bio-mimetics, control system, material technology and embedded computation techniques.
keywords	Control Systems; Real-Time Interactivity; Bio-Mimetics; Embedded Computation
series	eCAADe
email
last changed	2022/06/07 07:54

For more results click below: