Cumincad : CUMINCAD Papers : Search Results

CumInCAD is a Cumulative Index about publications in Computer Aided Architectural Design
supported by the sibling associations ACADIA, CAADRIA, eCAADe, SIGraDi, ASCAAD and CAAD futures

PDF papers
References

Hits 1 to 20 of 546

Reformat results as: short short into frame detailed detailed into frame

_id	2005_083
id	2005_083
authors	Agostinho, Francisco Santos
year	2005
title	Architecture as Drawing, Perception and Cognition
doi	https://doi.org/10.52842/conf.ecaade.2005.083
source	Digital Design: The Quest for New Paradigms [23nd eCAADe Conference Proceedings / ISBN 0-9541183-3-2] Lisbon (Portugal) 21-24 September 2005, pp. 83-90
summary	This work is about realizing that human perception is inherent to architecture. It is an asset and a trait subject to training and development in an empirical way, involving physical and manual action. It cannot be taught literally through convention and logic reasoning. It is a human achievement of great significance built on intellectual and scientific knowledge. It is something, being physical and empirical, that is supported on instrumental procedure. The computer, as a machine and an instrument, does not shorten the empirical experience of manipulation; on the contrary, it enhances J.J. Gibson’s findings about the perception of space in relation to eye and body movement. Being a cybernetic machine the computer may, and shall, evolve, and become perceptive. In order for that to happen, it is important to keep in mind the mechanism of human perception. Through producing a computerized model of a major architectural work, we develop natural knowledge about its physical features and the thought that lies underneath. To be able to use the computer as an instrument provides a user with explicit knowledge about its ways and mechanism that has to be made available. It involves training, which is to a great extent self-explanatory, and also explicit knowledge about the conventions that are being used, such as programming, reasoning and trigonometry.
keywords	Visualization; Environmental Simulation; Knowledge Modelling (KM); 3D Modeling
series	eCAADe
email
last changed	2022/06/07 07:54

_id	ijac20053206
id	ijac20053206
authors	Liakata-Pechlivanidou, Anastasia; Zerefos, Stylianos C.; Zerefos, Stylianos N.
year	2005
title	Perceptual and Cognitive Factors that Influence Orientation in Computer Generated Real Architectural Space
source	International Journal of Architectural Computing vol. 3 - no. 2, 245-254
summary	This study presents results from an experiment that concerns spatial perception and cognition in virtual environments. It also includes the effects of how the development of a simulated virtual space can change perception and cognition of a real building perceived only through architectural drawings and photographs. In the experiment each student was shown external and internal 360° images, representing nodes in virtual space, of the same virtual building. Two different groups of students were formed. The first group was shown photorealistic rendered images, while the other group the same images with non-photorealistic representation. Differences in orientation tendencies of the participating students, as well as statistical results from these experiments were tested and are presented in this paper. It was found that there was a statistically significant tendency of the students towards larger scatter in more luminous virtual space as well as a tendency to visit lit parts of virtual space.
series	journal
more	http://www.multi-science.co.uk/ijac.htm
last changed	2007/03/04 07:08

_id	sigradi2005_999
id	sigradi2005_999
authors	Patricia Recayte; Elizabeth Bund
year	2005
title	THE DIGITAL IMAGE IN THE MEDIATION BETWEEN ARCHITECT AND USER
source	SIGraDi 2005 - [Proceedings of the 9th Iberoamerican Congress of Digital Graphics] Lima - Peru 21-24 november 2005
summary	Digital mediation is considered to facilitate architect-user understanding, in order to enlarging the communicative competition, causing an involved attitude in the receptor. This paper proposes the study and analysis of the new communicative situation with the purpose of evaluate the impact of digital mediation in the understanding between producer and user. The investigation is focused as a comprehensive qualitative study. The process begins when the receptor contacts to media and then, it is able to observe attitudes and communicative competitions that play in the relationship. Variables involved in defi nition of digital mediation are: content, consumption ways, structures, digital image and alternative means. Observable attitudes of the receiver are organized in three categories: cognition, perceptive and emotive. Functional methodological tools are hoped to be found in order to evaluate the reach and infl uence of DM in the producer-user communication.
series	SIGRADI
type	normal paper
email
last changed	2016/03/10 09:57

_id	2d39
id	2d39
authors	Heylighen A, Heylighen F, Bollen J, Casaer M
year	2005
title	A DISTRIBUTED MODEL FOR TACIT DESIGN KNOWLEDGE EXCHANGE
source	SID 2005, Proceedings of the 4th Social Intelligence Design Workshop, Stanford University, March 2005 (CD Rom)
summary	The distributed cognition approach, and by extension the domain of social intelligence design, attempts to integrate three until recently separate realms: mind, society, and matter. The field offers a heterogeneous collection of ideas, observations, and case studies, yet lacks a coherent theoretical framework for building models of concrete systems and processes. Despite the intrinsic complexity of integrating individual, social and technologically-supported intelligence, the paper proposes a relatively simple ‘connectionist’ framework for conceptualizing a distributed cognitive system. This framework represents shared information sources (documents) as nodes connected by links of variable strength, which increases interactively with the number of co-occurrences of documents in the patterns of their usage. This connectionist learning procedure captures and uses the implicit knowledge of its community of users to help them find relevant information, thus supporting an unconscious form of exchange. The principles are illustrated by an envisaged application to a concrete problem domain: the dynamic sharing of design knowledge among a multitude of architects through a database of associatively connected building projects.
keywords	connectionism, distributed cognition, tacit knowledge, architectural design
series	other
type	normal paper
email
last changed	2005/04/01 13:24

_id	caadria2005_a_8a_a
id	caadria2005_a_8a_a
authors	Jixi Ai, Shike Li, Gebing Wei
year	2005
title	Digital Method for Landscape Evaluation: Taking The Lesser Three Gorges for example
doi	https://doi.org/10.52842/conf.caadria.2005.363
source	CAADRIA 2005 [Proceedings of the 10th International Conference on Computer Aided Architectural Design Research in Asia / ISBN 89-7141-648-3] New Delhi (India) 28-30 April 2005, vol. 1, pp. 363-375
summary	Landscape in narrow sense means a set of multiple features about topography, landforms, scenery and etc., and it is in accord to general people, especially their visual experience and psychological cognition, and acceptable too by architects and planners. The paper presents a digital method aimed the type of river valley landscape and several key quantitative indexes. The writers have taken the Lesser Three Gorges for an example to evaluate its value in landscape, and shown this method available and useful.
series	CAADRIA
email
last changed	2022/06/07 07:51

_id	ijac20053304
id	ijac20053304
authors	Lyon, Eduardo
year	2005
title	Autopoiesis and Digital Design Theory: CAD Systems as Cognitive Instruments
source	International Journal of Architectural Computing vol. 3 - no. 3, 317-334
summary	In contrast to traditional models of design process fundamentally defined by the abstract manipulation of objects, this study recognizes that the resources available for rethinking architecture are to be found in a reformulation of its theory and practice. This reformation should be based on non-linear design processes in which dynamic emergence and invention take the place of a linear design process fixed on a particular object evolution. Advances in computation thinking and technology have stimulated the design and formulation of a large number of design software. Its elaboration supposes a new conceptualization of our discipline's knowledge, in a body of principles and regulations, which commands the artifact's design and its realization; therefore, it constitutes a preliminary datum for its comprehension, and thereby is of theoretical importance. Despite the continuous increment of power in computers and software capacities, the creative space of freedom defined by them acting as cognitive instruments remains almost unexplored. Therefore, we propose a change from a design knowledge based on objects to one focused on design as a network of processes. In addition, this study explores the concept of Distributed Cognition in order to redefine the use of digital tools in design process as Cognitive Instruments.
series	journal
more	http://www.ingentaconnect.com/search/expand?pub=infobike://mscp/ijac/2005/00000003/00000003/art00005
last changed	2007/03/04 07:08

_id	cf2005_2_31_60
id	cf2005_2_31_60
authors	TALBOTT Kyle
year	2005
title	Integrating Generative Modelling and Design Process
source	Learning from the Past a Foundation for the Future [Special publication of papers presented at the CAAD futures 2005 conference held at the Vienna University of Technology / ISBN 3-85437-276-0], Vienna (Austria) 20-22 June 2005, pp. 77-88
summary	While researchers learn to generate design options with a computer, the question of how a designer interacts with these options remains largely unexcavated. This paper explores how a generative system should interact with a designer. It argues that limitations in human cognition require a designer to manage the complexity of his task with a creative thinking strategy called Perception-Imagination Overlay. To support this, a generative system should present a progression of contextual design “moves” rather than a collection of finished solutions. After validating a set of interface requirements, the paper presents an example interface. The paper concludes that the development of computational methods cannot be legitimately isolated from the development of an appropriate designer-system interaction, and that integrating these concerns might transform our conception of generative systems.
keywords	human-computer interaction, generative design, creativity, design process, 3D modelling
series	CAAD Futures
email
last changed	2005/05/05 07:06

_id	caadria2005_a_7b_a
id	caadria2005_a_7b_a
authors	Abdullah, A.Q.M. ; Md. Emran Hossain, Md. Shabab Habib Khan
year	2005
title	Digital Perception, Development and Presentation in Architecture: a study of Bangladesh with global context
doi	https://doi.org/10.52842/conf.caadria.2005.255
source	CAADRIA 2005 [Proceedings of the 10th International Conference on Computer Aided Architectural Design Research in Asia / ISBN 89-7141-648-3] New Delhi (India) 28-30 April 2005, vol. 1, pp. 255-267
summary	In the recent past the computer has become an important tool in both the design and presentation media/method in architecture. In this paper digitalization in architectural practice and architectural education in both the global and Bangladesh contexts have been studied. A survey questionnaire was carried out to find how and to what extent available software are being used in Bangladesh for this purpose. Opinion, views, expectations of architects from leading architectural firms of Bangladesh were studied to understand the future prospect of this field in Bangladesh.
series	CAADRIA
email
last changed	2022/06/07 07:54

_id	cf2005_1_64_168
id	cf2005_1_64_168
authors	ACHTEN Henri
year	2005
title	Resolving some Ambiguities in Real-time Design Drawing Recognition by means of a Decision Tree for Agents
source	Computer Aided Architectural Design Futures 2005 [Proceedings of the 11th International Conference on Computer Aided Architectural Design Futures / ISBN 1-4020-3460-1] Vienna (Austria) 20–22 June 2005, pp. 311-320
summary	In this paper, we present a theoretical study on automated understanding of the design drawing. This can lead to design support through the natural interface of sketching. In earlier work, 24 plan-based conventions of depiction have been identified, such as grid, zone, axial system, contour, and element vocabulary. These are termed graphic units. Graphic units form a good basis for recognition of drawings as they combine shape with meaning. We present some of the theoretical questions that have to be resolved before an implementation can be made. The contribution of this paper is: (i) identification of domain knowledge which is necessary for recognition; (ii) outlining combined strategy of multi-agent systems and online recognition; (iii) functional structure for agents and their organisation to converge on sketch recognition.
keywords	multi-agent system, decision tree, pattern recognition, sketch
series	CAAD Futures
email
last changed	2006/11/07 07:27

_id	caadria2005_a_2b_a
id	caadria2005_a_2b_a
authors	Affleck, Janice; Kvan Thomas
year	2005
title	REINTERPRETING VIRTUAL HERITAGE
doi	https://doi.org/10.52842/conf.caadria.2005.169
source	CAADRIA 2005 [Proceedings of the 10th International Conference on Computer Aided Architectural Design Research in Asia / ISBN 89-7141-648-3] New Delhi (India) 28-30 April 2005, vol. 1, pp. 169-178
summary	This paper describes the context and proposal for an alternative approach to the common pattern of application of digital tools in the area of cultural heritage, also know as Virtual Heritage (VH). It investigates and addresses arising issues in a digital case study developed to implement a theoretical framework and investigate how and if existing technology can support it.
series	CAADRIA
type	normal paper
email
last changed	2022/06/07 07:54

_id	ijac20053201
id	ijac20053201
authors	Aitcheson, Robert; Friedman, Jonathan; Seebohm, Thomas
year	2005
title	3-Axis CNC Milling in Architectural Design
source	International Journal of Architectural Computing vol. 3 - no. 2, 161-180
summary	Physical scale models still have a role in architectural design. 3-axis CNC milling provides one way of making scale models both for study purposes and for presentation in durable materials such as wood. We present some types of scale models, the methods for creating them and the place in the design process that scale models occupy. We provide an overview of CNC milling procedures and issues and we describe the process of how one can creatively develop appropriate methods for milling different types of scale models and materials. Two case studies are presented with which we hope to convey not only the range of possible models that can be machined but also the way one creatively explores to arrive at appropriate milling strategies. Where apposite, we compare 3-axis CNC milling to newer technologies used for rapid prototyping but rapid prototyping is not a primary focus.
series	journal
more	http://www.multi-science.co.uk/ijac.htm
last changed	2007/03/04 07:08

_id	2005_331
id	2005_331
authors	Al-Douri, Firas A., Clayton, Mark J. and Abrams, Robin F.
year	2005
title	The Impact of 3D Digital Modeling on the 3D Design Aspects in Urban Design Plans
doi	https://doi.org/10.52842/conf.ecaade.2005.331
source	Digital Design: The Quest for New Paradigms [23nd eCAADe Conference Proceedings / ISBN 0-9541183-3-2] Lisbon (Portugal) 21-24 September 2005, pp. 331-340
summary	Some experts suggest that urban design plans in US cities may lack adequate coverage of the three-dimensional design aspects of the built environment. 3D digital models may help designers visualize and interact with design alternatives, large urban data sets, and 3D information more effectively, thus correcting this problem. Case studies of recent urban design plans that have used 3D digital models may indicate whether these technologies can increase the quality of the plan. This research discusses the role 3D urban models can play in supporting designers in addressing the 3D design aspects. A literature review focused on reviewing secondary sources to construct or adopt theoretical propositions against which the empirical data can be compared and contrasted. A case study involved investigating the methods with which 3D models have been used in developing a selected urban design plan. The content analysis of the case study refuted the premise that the plan would inadequately address 3D aspects and utilize 3D information, and indicated an effective usage of 3D modeling to analyze and represent most of the 3D and 2D information elements and issues. The results are consistent with a hypothesis that the effective usage of 3D modeling would result in the effective coverage of 3D information and issues. The effective usage of the model’s functionalities has improved the quality of the decision-making process through improving designers’ cognitive capabilities and providing a platform for communicating design ideas among and across design teams.
keywords	3D Modeling; Urban Design Plans; Digital Models; 3D Design Aspects
series	eCAADe
email
last changed	2022/06/07 07:54

_id	caadria2014_042
id	caadria2014_042
authors	Alam, Jack and Jeremy J. Ham
year	2014
title	Towards a BIM-Based Energy Rating System
doi	https://doi.org/10.52842/conf.caadria.2014.285
source	Rethinking Comprehensive Design: Speculative Counterculture, Proceedings of the 19th International Conference on Computer-Aided Architectural Design Research in Asia (CAADRIA 2014) / Kyoto 14-16 May 2014, pp. 285–294
summary	Governments in Australia are faced with policy implementation that mandates higher energy efficient housing (Foran, Lenzen & Dey 2005). To this effect, the National Construction Code (NCC) 2013 stipulates the minimum energy performance for residential buildings as 114MJ/m2 per annum or 6 stars on an energy rating scale. Compliance with this minimum is mandatory but there are several methods through which residential buildings can be rated to comply with the deemed to satisfy provisions outlined in the NCC. FirstRate5 is by far the most commonly used simulation software used in Victoria, Australia. Meanwhile, Building Information Modelling (BIM), using software such as ArchiCAD has gained a foothold in the industry. The energy simulation software within ArchiCAD, EcoDesigner, enables the reporting on the energy performance based on BIM elements that contain thermal information. This research is founded on a comparative study between FirstRate5 and EcoDesigner. Three building types were analysed and compared. The comparison finds significant differences between simulations, being, measured areas, thermal loads and potentially serious shortcomings within FirstRate5, that are discussed along with the future potential of a fully BIM-integrated model for energy rating certification in Victoria.
keywords	Building Information Modelling, energy rating, FirstRate 5, ArchiCAD EcoDesigner, Building Energy Model
series	CAADRIA
email
last changed	2022/06/07 07:54

_id	ascaad2006_paper25
id	ascaad2006_paper25
authors	Artopoulos, Giorgos; Stanislav Roudavski and Francois Penz
year	2006
title	Adaptive Generative Patterns: design and construction of Prague Biennale pavilion
source	Computing in Architecture / Re-Thinking the Discourse: The Second International Conference of the Arab Society for Computer Aided Architectural Design (ASCAAD 2006), 25-27 April 2006, Sharjah, United Arab Emirates
summary	This paper describes an experimental practice-based research project that considered design process, implementation and construction of a pavilion built to be part of the Performative Space section of the International Biennale of Contemporary Art, Prague 2005. The project was conceptualized as a time-bound performative situation with a parasite-like relationship to its host environment. Its design has emerged through an innovative iterative process that utilized digital simulative and procedural techniques and was formed in response to place-specific behavioral challenges. This paper presents the project as an in-depth case-study of digital methods in design, mass customization and unified methods of production. In particular, it considers the use of Voronoi patterns for production of structural elements providing detail on programming and construction techniques in relationship to design aspirations and practical constraints.
series	ASCAAD
email
last changed	2007/04/08 19:47

_id	sigradi2005_190
id	sigradi2005_190
authors	Ataman, Osman
year	2005
title	The digital architecture of tomorrow
source	SIGraDi 2005 - [Proceedings of the 9th Iberoamerican Congress of Digital Graphics] Lima - Peru 21-24 november 2005, vol. 1, pp. 190-193
summary	This paper presents an ongoing research project about the development of the materials and fabrication techniques for a fundamentally new class of architectural composite. This type of composite, which is a representative example of an even broader class of smart architectural material, has the potential to change the design and function of an architectural structure or living environment. As of today, this kind of composite does not exist. Once completed, this will be the first technology on its own. We believe this study will lay the fundamental groundwork for a new paradigm in surface engineering that may be of considerable significance in architecture, building and construction industry, and materials science.
series	SIGRADI
last changed	2016/03/10 09:47

_id	ijac20053202
id	ijac20053202
authors	Ataman, Osman
year	2005
title	Integrating Digital and Building Technologies: Towards a New Architectural Composite
source	International Journal of Architectural Computing vol. 3 - no. 2, 181-190
summary	This paper presents an ongoing research project about the development of the materials and fabrication techniques for a fundamentally new class of architectural composite. This type of composite, which is a representative example of an even broader class of smart architectural material, has the potential to change the design and function of an architectural structure or living environment. As of today, this kind of composite does not exist. Once completed, this will be the first technology on its own. We believe this study will lay the fundamental groundwork for a new paradigm in surface engineering that may be of considerable significance in architecture, building and construction industry, and materials science.
series	journal
more	http://www.multi-science.co.uk/ijac.htm
last changed	2007/03/04 07:08

_id	sigradi2005_126
id	sigradi2005_126
authors	Barrios Hernandez, Carlos Roberto
year	2005
title	EVALUATION OF parametric models: TWO PROVISOS FOR THE SAGRADA FAMILIA COLUMNS
source	SIGraDi 2005 - [Proceedings of the 9th Iberoamerican Congress of Digital Graphics] Lima - Peru 21-24 november 2005, vol. 1, pp. 126-132
summary	This paper presents a research in progress in the development of parametric models for geometric manipulation of complex shapes, and introduces a methodology for evaluation of the design instances of a parametric model. The research presents a case study on the designs of the Spanish architect Antonio Gaudi, and takes on the fundamental rules of the form generation of the nave columns of the Expiatory Temple of the Sagrada Familia in Barcelona. The evaluation is done applying two provisos that determine if a shape is part of the design language and is an instance of the parametric model is a Gaudinian design.
series	SIGRADI
email
last changed	2016/03/10 09:47

_id	cf2011_p170
id	cf2011_p170
authors	Barros, Mário; Duarte José, Chaparro Bruno
year	2011
title	Thonet Chairs Design Grammar: a Step Towards the Mass Customization of Furniture
source	Computer Aided Architectural Design Futures 2011 [Proceedings of the 14th International Conference on Computer Aided Architectural Design Futures / ISBN 9782874561429] Liege (Belgium) 4-8 July 2011, pp. 181-200.
summary	The paper presents the first phase of research currently under development that is focused on encoding Thonet design style into a generative design system using a shape grammar. The ultimate goal of the work is the design and production of customizable chairs using computer assisted tools, establishing a feasible practical model of the paradigm of mass customization (Davis, 1987). The current research step encompasses the following three steps: (1) codification of the rules describing Thonet design style into a shape grammar; (2) implementing the grammar into a computer tool as parametric design; and (3) rapid prototyping of customized chair designs within the style. Future phases will address the transformation of the Thonet’s grammar to create a new style and the production of real chair designs in this style using computer aided manufacturing. Beginning in the 1830’s, Austrian furniture designer Michael Thonet began experimenting with forming steam beech, in order to produce lighter furniture using fewer components, when compared with the standards of the time. Using the same construction principles and standardized elements, Thonet produced different chairs designs with a strong formal resemblance, creating his own design language. The kit assembly principle, the reduced number of elements, industrial efficiency, and the modular approach to furniture design as a system of interchangeable elements that may be used to assemble different objects enable him to become a pioneer of mass production (Noblet, 1993). The most paradigmatic example of the described vision of furniture design is the chair No. 14 produced in 1858, composed of six structural elements. Due to its simplicity, lightness, ability to be stored in flat and cubic packaging for individual of collective transportation, respectively, No. 14 became one of the most sold chairs worldwide, and it is still in production nowadays. Iconic examples of mass production are formally studied to provide insights to mass customization studies. The study of the shape grammar for the generation of Thonet chairs aimed to ensure rules that would make possible the reproduction of the selected corpus, as well as allow for the generation of new chairs within the developed grammar. Due to the wide variety of Thonet chairs, six chairs were randomly chosen to infer the grammar and then this was fine tuned by checking whether it could account for the generation of other designs not in the original corpus. Shape grammars (Stiny and Gips, 1972) have been used with sucesss both in the analysis as in the synthesis of designs at different scales, from product design to building and urban design. In particular, the use of shape grammars has been efficient in the characterization of objects’ styles and in the generation of new designs within the analyzed style, and it makes design rules amenable to computers implementation (Duarte, 2005). The literature includes one other example of a grammar for chair design by Knight (1980). In the second step of the current research phase, the outlined shape grammar was implemented into a computer program, to assist the designer in conceiving and producing customized chairs using a digital design process. This implementation was developed in Catia by converting the grammar into an equivalent parametric design model. In the third phase, physical models of existing and new chair designs were produced using rapid prototyping. The paper describes the grammar, its computer implementation as a parametric model, and the rapid prototyping of physical models. The generative potential of the proposed digital process is discussed in the context of enabling the mass customization of furniture. The role of the furniture designer in the new paradigm and ideas for further work also are discussed.
keywords	Thonet; furniture design; chair; digital design process; parametric design; shape grammar
series	CAAD Futures
email
last changed	2012/02/11 19:21

_id	sigradi2005_720
id	sigradi2005_720
authors	Bermudez, Julio; Jim Agutter
year	2005
title	Data Architecture Studio: Premises, Pedagogy, and Results
source	SIGraDi 2005 - [Proceedings of the 9th Iberoamerican Congress of Digital Graphics] Lima - Peru 21-24 november 2005, vol. 2, pp. 720-724
summary	Information Visualization (InfoVis) is the field devoted to the study of methods for displaying data in information-rich domains. Although most of the InfoVis solutions have been developed by scientists and engineers, artists and designers have began to bring in their expertise to advance the state of the art. The role that architects may play in this development could be substantial. Yet, participating in this new design frontier means to master skills and knowledge not necessarily covered by traditional architectural education. This paper presents a four-year effort devoted to develop such InfoVis curricula in an architectural context. The course encodes knowledge harvested over almost 10 year of InfoVis research bridging 5 disciplines and delivering many successful academic, technological, and commercial products. In particular, the class investigates the use of architecture as (1) a fundamental data organizational device and (2) a research method of examination, response, and communication for InfoVis problems.
series	SIGRADI
email
last changed	2016/03/10 09:47

_id	sigradi2020_112
id	sigradi2020_112
authors	Brandao, Jaqueline; Costa, Frederico Ribeiro; Silva, Geovany
year	2020
title	Morphological transformations in Brazilian peripheral areas: a case study of the Vila Cabral neighborhood at Campina Grande-PB
source	SIGraDi 2020 [Proceedings of the 24th Conference of the Iberoamerican Society of Digital Graphics - ISSN: 2318-6968] Online Conference 18 - 20 November 2020, pp. 112-119
summary	This article describes an analysis of the morphological changes between 2005 and 2020 in the Vila Cabral neighborhood, located on the outskirts of the Brazilian city of Campina Grande. The research was developed in two different analytical scenarios, adopting the algorithmic- parametric computational implementation as a methodology, and applying the following procedures: (i) formal decomposition of a sample of the urban fabric; (ii) visibility graph analysis (VGA); (iii) analysis of the diversity of uses and (iv) analysis of urban density (populational and built). The study demonstrated that the association of different urban analysis tools strengthens decision-making in the context of evidence-based urban design.
keywords	Algorithmic-parametric urban analysis, Evidence-based design, Urban morphology, Campina Grande, Brazilian peripheral sprawl
series	SIGraDi
email
last changed	2021/07/16 11:48

For more results click below: